Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot SPL 2019.04-00002-g07d5700e21 (Mar 06 2020 - 11:24:55 -0600)
- Trying to boot from MMC2
- Loading Environment from EXT4...
- ** Unable to use mmc 0:1 for loading the env **
- U-Boot 2019.04-00002-g07d5700e21 (Mar 06 2020 - 11:24:55 -0600), Build: jenkins-github_Bootloader-Builder-137
- CPU : AM335X-GP rev 2.1
- I2C: ready
- DRAM: 512 MiB
- No match for driver 'omap_hsmmc'
- No match for driver 'omap_hsmmc'
- Some drivers were not found
- Reset Source: Power-on reset has occurred.
- RTC 32KCLK Source: External.
- MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
- Loading Environment from EXT4...
- ** Unable to use mmc 0:1 for loading the env **
- Board: BeagleBone Black
- <ethaddr> not set. Validating first E-fuse MAC
- BeagleBone Black:
- BeagleBone: cape eeprom: i2c_probe: 0x54:
- BeagleBone: cape eeprom: i2c_probe: 0x55:
- BeagleBone: cape eeprom: i2c_probe: 0x56:
- BeagleBone: cape eeprom: i2c_probe: 0x57:
- Net: eth0: MII MODE
- cpsw, usb_ether
- Press SPACE to abort autoboot in 0 seconds
- board_name=[A335BNLT] ...
- board_rev=[00C0] ...
- switch to partitions #0, OK
- mmc0 is current device
- SD/MMC found on device 0
- switch to partitions #0, OK
- mmc0 is current device
- Scanning mmc 0:1...
- Found /extlinux/extlinux.conf
- Retrieving file: /extlinux/extlinux.conf
- 119 bytes read in 3 ms (38.1 KiB/s)
- 1: Yocto
- Retrieving file: /zImage
- 7000192 bytes read in 439 ms (15.2 MiB/s)
- append: root=PARTUUID=01139ec5-02 rootwait console=ttyS0,115200
- Retrieving file: /am335x-boneblack.dtb
- 58300 bytes read in 6 ms (9.3 MiB/s)
- ## Flattened Device Tree blob at 88000000
- Booting using the fdt blob at 0x88000000
- Loading Device Tree to 8ffee000, end 8ffff3bb ... OK
- Starting kernel ...
- Booting Linux on physical CPU 0x0
- Linux version 5.4.20-yocto-standard (oe-user@oe-host) (gcc version 9.3.0 (GCC)) #1 PREEMPT Thu Feb 20 13:41:08 UTC 2020
- CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
- CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- OF: fdt: Machine model: TI AM335x BeagleBone Black
- Memory policy: Data cache writeback
- cma: Reserved 16 MiB at 0x9e800000
- CPU: All CPU(s) started in SVC mode.
- AM335X ES2.1 (sgx neon)
- Built 1 zonelists, mobility grouping on. Total pages: 129666
- Kernel command line: root=PARTUUID=01139ec5-02 rootwait console=ttyS0,115200
- Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
- Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
- mem auto-init: stack:off, heap alloc:off, heap free:off
- Memory: 484692K/523264K available (10240K kernel code, 938K rwdata, 3508K rodata, 1024K init, 582K bss, 22188K reserved, 16384K cma-reserved, 0K highmem)
- SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- ftrace: allocating 35863 entries in 71 pages
- rcu: Preemptible hierarchical RCU implementation.
- Tasks RCU enabled.
- rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
- NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
- IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts
- random: get_random_bytes called from start_kernel+0x2bc/0x4e8 with crng_init=0
- OMAP clockevent source: timer2 at 24000000 Hz
- sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
- clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
- OMAP clocksource: timer1 at 24000000 Hz
- timer_probe: no matching timers found
- Console: colour dummy device 80x30
- Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736)
- pid_max: default: 32768 minimum: 301
- LSM: Security Framework initializing
- Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- CPU: Testing write buffer coherency: ok
- CPU0: Spectre v2: using BPIALL workaround
- Setting up static identity map for 0x80100000 - 0x80100060
- rcu: Hierarchical SRCU implementation.
- devtmpfs: initialized
- VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
- clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- futex hash table entries: 256 (order: -1, 3072 bytes, linear)
- xor: measuring software checksum speed
- arm4regs : 1218.400 MB/sec
- 8regs : 905.200 MB/sec
- 32regs : 1172.000 MB/sec
- xor: using function: arm4regs (1218.400 MB/sec)
- pinctrl core: initialized pinctrl subsystem
- NET: Registered protocol family 16
- DMA: preallocated 256 KiB pool for atomic coherent allocations
- l3-aon-clkctrl:0000:0: failed to disable
- cpuidle: using governor ladder
- cpuidle: using governor menu
- hw-breakpoint: debug architecture 0x4 unsupported.
- Serial: AMBA PL011 UART driver
- raid6: int32x8 gen() 151 MB/s
- raid6: int32x8 xor() 102 MB/s
- raid6: int32x4 gen() 159 MB/s
- raid6: int32x4 xor() 113 MB/s
- raid6: int32x2 gen() 270 MB/s
- raid6: int32x2 xor() 190 MB/s
- raid6: int32x1 gen() 226 MB/s
- raid6: int32x1 xor() 161 MB/s
- raid6: using algorithm int32x2 gen() 270 MB/s
- raid6: .... xor() 190 MB/s, rmw enabled
- raid6: using intx1 recovery algorithm
- edma 49000000.edma: TI EDMA DMA engine driver
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- clocksource: Switched to clocksource timer1
- NET: Registered protocol family 2
- tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
- TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
- TCP bind hash table entries: 4096 (order: 2, 16384 bytes, linear)
- TCP: Hash tables configured (established 4096 bind 4096)
- UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
- UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
- NET: Registered protocol family 1
- RPC: Registered named UNIX socket transport module.
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- RPC: Registered tcp NFSv4.1 backchannel transport module.
- hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
- Initialise system trusted keyrings
- workingset: timestamp_bits=14 max_order=17 bucket_order=3
- NFS: Registering the id_resolver key type
- Key type id_resolver registered
- Key type id_legacy registered
- Key type cifs.idmap registered
- Key type asymmetric registered
- Asymmetric key parser 'x509' registered
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
- io scheduler mq-deadline registered
- io scheduler kyber registered
- OMAP GPIO hardware version 0.1
- pinctrl-single 44e10800.pinmux: 142 pins, size 568
- Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- printk: console [ttyS0] disabled
- 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 29, base_baud = 3000000) is a 8250
- random: fast init done
- printk: console [ttyS0] enabled
- omap_rng 48310000.rng: Random Number Generator ver. 20
- random: crng init done
- brd: module loaded
- mtdoops: mtd device (mtddev=name/number) must be supplied
- libphy: Fixed MDIO Bus: probed
- davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000
- libphy: 4a101000.mdio: probed
- davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
- cpsw 4a100000.ethernet: initialized cpsw ale version 1.4
- cpsw 4a100000.ethernet: ALE Table size 1024
- cpsw 4a100000.ethernet: Detected MACID = 0c:1c:57:08:28:4b
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ehci-omap: OMAP-EHCI Host Controller driver
- usbcore: registered new interface driver usb-storage
- am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator
- am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator
- omap_rtc 44e3e000.rtc: registered as rtc0
- i2c /dev entries driver
- omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
- omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)
- omap_hsmmc 48060000.mmc: Got CD GPIO
- omap_hsmmc 47810000.mmc: RX DMA channel request failed
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- oprofile: using arm/armv7
- u32 classifier
- input device check on
- Actions configured
- NET: Registered protocol family 10
- Segment Routing with IPv6
- sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
- NET: Registered protocol family 17
- Key type dns_resolver registered
- ThumbEE CPU extension supported.
- omap_voltage_late_init: Voltage driver support not added
- mmc0: host does not support reading read-only switch, assuming write-enable
- Loading compiled-in X.509 certificates
- Key type ._fscrypt registered
- Key type .fscrypt registered
- mmc0: new high speed SDHC card at address aaaa
- Btrfs loaded, crc32c=crc32c-generic
- mmcblk0: mmc0:aaaa SC32G 29.7 GiB
- Key type encrypted registered
- mmcblk0: p1 p2
- mmc1: new high speed MMC card at address 0001
- mmcblk1: mmc1:0001 M62704 3.56 GiB
- mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB
- mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB
- mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB, chardev (249:0)
- mmcblk1: p1
- tps65217 0-0024: TPS65217 ID 0xe version 1.2
- tda998x 0-0070: found TDA19988
- tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops)
- [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [drm] No driver support for vblank timestamp query.
- [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 0
- [drm] Cannot find any crtc or sizes
- omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
- [drm] Cannot find any crtc or sizes
- omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
- musb-hdrc musb-hdrc.1: MUSB HDRC host driver
- musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 1 port detected
- printk: console [netcon0] enabled
- netconsole: network logging started
- omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01T00:00:00 UTC (946684800)
- cfg80211: Loading compiled-in X.509 certificates for regulatory database
- cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
- platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
- cfg80211: failed to load regulatory.db
- EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
- devtmpfs: mounted
- Freeing unused kernel memory: 1024K
- Run /sbin/init as init process
- INIT: version booting
- Framebuffer /dev/fb0 not detected
- Boot splashscreen disabled
- FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
- Starting udev
- udevd[142]: starting version 3.2.9
- udevd[143]: starting eudev-3.2.9
- EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
- Sat Apr 25 19:58:25 UTC 2020
- INIT: Entering runlevel: 5
- Configuring network interfaces... cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0)
- SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL)
- udhcpc: started, v1.31.1
- udhcpc: sending discover
- udhcpc: sending discover
- udhcpc: sending discover
- udhcpc: no lease, forking to background
- done.
- Starting random number generator daemon.
- Starting OpenBSD Secure Shell server: sshd
- done.
- Starting rpcbind daemon...done.
- starting statd: done
- Starting atd: OK
- NFS daemon support not enabled in kernel
- Starting system log daemon...0
- Starting crond: OK
- umount: /mnt/.psplash: no mount point specified.
- INIT: Id "AMA0" respawning too fast: disabled for 5 minutes
Add Comment
Please, Sign In to add comment