U-Boot SPL 2014.01-00001-g2814acf (Mar 10 2014 - 17:59:30)
OMAP4430 ES2.3
SPL: Please implement spl_start_uboot() for your board
SPL: Direct Linux boot not active!
reading u-boot.img
reading u-boot.img


U-Boot 2014.01-00001-g2814acf (Mar 10 2014 - 17:59:30)

CPU  : OMAP4430 ES2.3
Board: duovero
I2C:   ready
DRAM:  1 GiB
MMC:   OMAP SD/MMC: 0
Using default environment

Net:   smc911x-0
Warning: smc911x-0 using MAC address from net device

Hit any key to stop autoboot:  0
mmc0 is current device
SD/MMC found on device 0
reading boot.scr
** Unable to read file boot.scr **
reading uEnv.txt
185 bytes read in 4 ms (44.9 KiB/s)
Importing environment from mmc0 ...
Running uenvcmd ...
reading uImage
3718648 bytes read in 185 ms (19.2 MiB/s)
Booting from mmc (uEnv.txt configuration) ...
## Booting kernel from Legacy Image at 82000000 ...
   Image Name:   Linux-3.6.11-yocto-standard
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3718584 Bytes = 3.5 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK

Starting kernel ...

Booting Linux on physical CPU 0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.6.11-yocto-standard (adam@pine) (gcc version 4.8.1 (GCC) ) #2 SMP Fri Mar 7 11:39:31 PST 2014
CPU: ARMv7 Processor [411fc093] revision 3 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: OMAP4 duovero board
Reserving 16777216 bytes SDRAM for VRAM
Memory policy: ECC disabled, Data cache writealloc
OMAP4430 ES2.3
PERCPU: Embedded 9 pages/cpu @c1032000 s13120 r8192 d15552 u36864
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 255744
Kernel command line: console=ttyO2,115200n8 vram=16M root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
allocated 2097152 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 743MB 264MB = 1007MB total
Memory: 1011672k/1011672k available, 36904k reserved, 270336K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc06c4ea4   (6900 kB)
      .init : 0xc06c5000 - 0xc0710340   ( 301 kB)
      .data : 0xc0712000 - 0xc0795db8   ( 528 kB)
       .bss : 0xc0795ddc - 0xc0829468   ( 590 kB)
Hierarchical RCU implementation.
NR_IRQS:474
omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
OMAP clockevent source: GPTIMER1 at 32768 Hz
omap_hwmod: sys_32k_ck: missing clockdomain for sys_32k_ck.
sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
OMAP clocksource: 32k_counter at 32768 Hz
Console: colour dummy device 80x30
Calibrating delay loop... 1194.24 BogoMIPS (lpj=4665344)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys debug
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys perf_event
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x80499b30 - 0x80499b88
L310 cache controller enabled
l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x7e470000, Cache size: 1048576 B
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
CPU1: Unknown IPI message 0x0
Brought up 2 CPUs
SMP: Total of 2 processors activated (2388.48 BogoMIPS).
devtmpfs: initialized
omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
omap_hwmod: cm_core_aon: cannot be enabled for reset (3)
omap_hwmod: cm_core: cannot be enabled for reset (3)
dummy:
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
GPMC revision 6.0
gpmc: irq-52 could not claim: err -22
OMAP GPIO hardware version 0.1
omap_mux_init: Add partition: #1: core, flags: 2
omap_mux_init: Add partition: #2: wkup, flags: 2
_omap_mux_get_by_name: Could not find signal uart1_rx.uart1_rx
_omap_mux_get_by_name: Could not find signal uart1_rx.uart1_rx
 usbhs_omap: alias fck already exists
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
OMAP DMA hardware revision 0.0
bio: create slab <bio-0> at 0
omap-dma-engine omap-dma-engine: OMAP DMA engine driver
vwlan: 3000 mV
fixed-dummy:
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 400 kHz
Skipping twl internal clock init and using bootloader value (unknown osc rate)
twl 1-0048: PIH (irq 39) chaining IRQs 352..372
VUSB: 3300 mV normal standby
twl6030_usb twl6030_usb: Initialized TWL6030 USB module
vdd_mpu: 500 <--> 1500 mV normal
vdd_iva: 500 <--> 1500 mV normal
vdd_core: 500 <--> 1500 mV normal
V1V8: 1800 mV normal standby
V2V1: 2100 mV normal standby
VMMC: 1200 <--> 3000 mV at 3000 mV normal standby
VPP: 1800 <--> 2500 mV at 1900 mV normal standby
VCXIO: 1800 mV normal standby
VCXIO: supplied by V2V1
VDAC: 1800 mV normal standby
VDAC: supplied by V2V1
VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby
VANA: 2100 mV normal standby
omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 400 kHz
omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 100 kHz
omap_i2c omap_i2c.4: bus 4 rev2.4.0 at 400 kHz
omap-iommu omap-iommu.0: ducati registered
omap-iommu omap-iommu.1: tesla registered
Advanced Linux Sound Architecture Driver Version 1.0.25.
Switching to clocksource 32k_counter
usbhs_omap usbhs_omap: ehci_logic_fck failed:-2
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
audit: initializing netlink socket (disabled)
type=2000 audit(0.492:1): initialized
bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
fuse init (API version 7.20)
msgmni has been set to 1447
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
OMAP DSS rev 4.0
omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
console [ttyO2] enabled
omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
brd: module loaded
loop: module loaded
smsc911x: Driver version 2008-10-21
libphy: smsc911x-mdio: probed
smsc911x smsc911x.0: eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=smsc911x-0:01, irq=-1)
smsc911x smsc911x.0: eth0: MAC Address: 00:15:c9:29:06:57
usbcore: registered new interface driver kaweth
usbcore: registered new interface driver asix
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver cdc_ncm
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-omap.0 supply hsusb0 not found, using dummy regulator
ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00
ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OMAP-EHCI Host Controller
usb usb1: Manufacturer: Linux 3.6.11-yocto-standard ehci_hcd
usb usb1: SerialNumber: ehci-omap.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-omap3 ohci-omap3.0: OMAP3 OHCI Host Controller
ohci-omap3 ohci-omap3.0: new USB bus registered, assigned bus number 2
ohci-omap3 ohci-omap3.0: irq 108, io mem 0x4a064800
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OMAP3 OHCI Host Controller
usb usb2: Manufacturer: Linux 3.6.11-yocto-standard ohci_hcd
usb usb2: SerialNumber: ohci-omap3.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124
mousedev: PS/2 mouse device common for all mice
twl_rtc twl_rtc: Power up reset detected.
twl_rtc twl_rtc: Enabling TWL-RTC
twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
i2c /dev entries driver
cpuidle: using governor ladder
cpuidle: using governor menu
omap_hsmmc omap_hsmmc.0: Failed to get debounce clk
omap-dma-engine omap-dma-engine: allocating channel for 62
omap-dma-engine omap-dma-engine: allocating channel for 61
omap_hsmmc.0 supply vmmc_aux not found, using dummy regulator
omap_hsmmc omap_hsmmc.4: Failed to get debounce clk
omap-dma-engine omap-dma-engine: allocating channel for 60
omap-dma-engine omap-dma-engine: allocating channel for 59
omap_hsmmc.4 supply vmmc_aux not found, using dummy regulator
OCR: 0
usb 1-1: new high-speed USB device number 2 using ehci-omap
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbcore: registered new interface driver snd-usb-audio
twl6040-codec twl6040-codec: ASoC: Failed to create Capture debugfs file
omap-abe-twl6040 omap-abe-twl6040:  twl6040-legacy <-> omap-mcpdm mapping ok
omap-hdmi-audio omap-hdmi-audio:  omap-hdmi-hifi <-> omap-hdmi-audio-dai mapping ok
oprofile: hardware counters not available
oprofile: using timer interrupt.
TCP: cubic registered
mmc0: host does not support reading read-only switch. assuming write-enable.
NET: Registered protocol family 17
NET: Registered protocol family 15
Key type dns_resolver registered
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
mmc0: new high speed SD card at address 1234
omap_vc_i2c_init: I2C config for vdd_iva does not match other channels (0).
omap_vc_i2c_init: I2C config for vdd_mpu does not match other channels (0).
Power Management for TI OMAP4.
ThumbEE CPU extension supported.
mmcblk0: mmc0:1234 SA02G 1.85 GiB
Registering SWP/SWPB emulation handler
 mmcblk0: p1 p2
OCR: 0
host->ocr_avail_sdio: 0
Host: 40000	OCR: b0ff8000
usb 1-1: New USB device found, idVendor=0409, idProduct=005a
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
registered taskstats version 1
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
mmc1: new high speed SDIO card at address 0001
Reserved SVD code 101
Unimplemented SVD code 12
Console: switching to colour frame buffer device 240x67
VANA: incomplete constraints, leaving on
VDAC: incomplete constraints, leaving on
VUSB: incomplete constraints, leaving on
twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
ALSA device list:
  #0: duovero
  #1: OMAPHDMI
kjournald starting.  Commit interval 5 seconds
usb 1-1.3: new low-speed USB device number 3 using ehci-omap
usb 1-1.3: New USB device found, idVendor=0461, idProduct=4d42
usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-1.3: Product: Dynex 5-Button Wired Optical Mouse
input: Dynex 5-Button Wired Optical Mouse as /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input0
hid-generic 0003:0461:4D42.0001: input: USB HID v1.11 Mouse [Dynex 5-Button Wired Optical Mouse] on usb-ehci-omap.0-1.3/input0
EXT3-fs (mmcblk0p2): using internal journal
EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) on device 179:2.
devtmpfs: mounted
Freeing init memory: 300K
usb 1-1.4: new low-speed USB device number 4 using ehci-omap
usb 1-1.4: New USB device found, idVendor=0518, idProduct=0001
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4: Product: USB-compliant keyboard
usb 1-1.4: Manufacturer: Plus More Enterprise LTD.
input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input1
hid-generic 0003:0518:0001.0002: input: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-ehci-omap.0-1.4/input0
input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-1/1-1.4/1-1.4:1.1/input/input2
hid-generic 0003:0518:0001.0003: input: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-ehci-omap.0-1.4/input1
systemd[1]: systemd 206 running in system mode. (+PAM +LIBWRAP -AUDIT -SELINUX +IMA +SYSVINIT -LIBCRYPTSETUP -GCRYPT +ACL +XZ)

Welcome to Linux!

NET: Registered protocol family 10
systemd[1]: Inserted module 'ipv6'
systemd[1]: Set hostname to <duovero>.
systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Expecting device dev-ttyO2.device...
         Expecting device dev-ttyO2.device...
systemd[1]: Expecting device dev-ttyGS0.device...
         Expecting device dev-ttyGS0.device...
systemd[1]: Starting Remote File Systems.
[  OK  ] Reached target Remote File Systems.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Starting Syslog Socket.
[  OK  ] Listening on Syslog Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Delayed Shutdown Socket.
[  OK  ] Listening on Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting Root Slice.
[  OK  ] Created slice Root Slice.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting User and Session Slice.
[  OK  ] Created slice User and Session Slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting System Slice.
[  OK  ] Created slice System Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Slices.
[  OK  ] Reached target Slices.
systemd[1]: Reached target Slices.
systemd[1]: Starting system-getty.slice.
[  OK  ] Created slice system-getty.slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting system-serial\x2dgetty.slice.
[  OK  ] Created slice system-serial\x2dgetty.slice.
systemd[1]: Created slice system-serial\x2dgetty.slice.
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Starting Paths.
[  OK  ] Reached target Paths.
systemd[1]: Reached target Paths.
systemd[1]: Starting udev Kernel Socket.
[  OK  ] Listening on udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Control Socket.
[  OK  ] Listening on udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting Journal Socket.
[  OK  ] Listening on Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
         Starting Create list of required static device nodes...rrent kernel...
systemd[1]: Starting udev Coldplug all Devices...
         Starting udev Coldplug all Devices...
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
         Starting Apply Kernel Variables...
systemd[1]: Mounting FUSE Control File System...
         Mounting FUSE Control File System...
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted Configuration File System.
systemd[1]: Mounting Debug File System...
         Mounting Debug File System...
systemd[1]: Starting Journal Service...
         Starting Journal Service...
[  OK  ] Started Journal Service.
systemd[1]: Started Journal Service.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[  OK  ] Set up automount Arbitrary Executable File Formats F...utomount Point.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Starting Swap.
[  OK  ] Reached target Swap.
systemd[1]: Reached target Swap.
systemd[1]: Started File System Check on Root Device.
systemd[1]: Mounting Temporary Directory...
         Mounting Temporary Directory...
systemd[1]: Starting Remount Root and Kernel File Systems...
         Starting Remount Root and Kernel File Systems...
[  OK  ] Started Apply Kernel Variables.
systemd[1]: Started Apply Kernel Variables.
[  OK  ] Mounted FUSE Control File System.
systemd[1]: Mounted FUSE Control File System.
[  OK  ] Mounted Debug File System.
systemd[1]: Mounted Debug File System.
[  OK  ] Mounted Temporary Directory.
systemd[1]: Mounted Temporary Directory.
[  OK  ] Started udev Coldplug all Devices.
systemd[1]: Started udev Coldplug all Devices.
[  OK  ] Started Create list of required static device nodes ...current kernel.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create static device nodes in /dev...
         Starting Create static device nodes in /dev...
[  OK  ] Started Remount Root and Kernel File Systems.
systemd[1]: Started Remount Root and Kernel File Systems.
[  OK  ] Started Create static device nodes in /dev.
systemd[1]: Started Create static device nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
         Starting udev Kernel Device Manager...
systemd[1]: Starting Load/Save Random Seed...
         Starting Load/Save Random Seed...
systemd-udevd[97]: starting version 206
systemd[1]: Starting Local File Systems (Pre).
[  OK  ] Reached target Local File Systems (Pre).
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Mounting /var/volatile...
         Mounting /var/volatile...
systemd[1]: var-volatile.mount: Directory /var/volatile to mount over is not empty, mounting anyway.
systemd[1]: Started Machine ID first boot configure.
[  OK  ] Started udev Kernel Device Manager.
systemd[1]: Started udev Kernel Device Manager.
[  OK  ] Started Load/Save Random Seed.
systemd[1]: Started Load/Save Random Seed.
[  OK  ] Mounted /var/volatile.
systemd[1]: Mounted /var/volatile.
systemd[1]: Starting Local File Systems.
[  OK  ] Reached target Local File Systems.
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Trigger Flushing of Journal to Persistent Storage...
         Starting Trigger Flushing of Journal to Persistent Storage...
systemd[1]: Starting Recreate Volatile Files and Directories...
         Starting Recreate Volatile Files and Directories...
systemd[1]: Starting Sound Card.
[  OK  ] Reached target Sound Card.
systemd[1]: Reached target Sound Card.
[  OK  ] Started Recreate Volatile Files and Directories.
systemd[1]: Started Recreate Volatile Files and Directories.
systemd[1]: Starting Update UTMP about System Reboot/Shutdown...
         Starting Update UTMP about System Reboot/Shutdown...
systemd[1]: Started Run pending postinsts.
[  OK  ] Started TriggerBluetooth: Core ver 2.16
 Flushing of JouNET: Registered protocol family 31
rnal to PersisteBluetooth: HCI device and connection manager initialized
nt Storage.
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
systemd[1]: Started Trigger Flushing of Journal to Persistent Storage.
[  OK  ] Started Update UTMP about System Reboot/Shutdown.
systemd[1]: Started Update UTMP about System Reboot/Shutdown.
systemd[1]: Starting System Initialization.
[  OK  ] Reached target System Initialization.
systemd[1]: Reached target System Initialization.
systemd[1]: Started Manage Sound Card State (restore and store).
systemd[1]: Starting Restore Sound Card State...
         Starting Restore Sound Card State...
systemd[1]: Starting sshd.socket.
Bluetooth: vendor=0x2df, device=0x911a, class=255, fn=2
systemd[1]: Starting Daily Cleanup of Temporary Directories.
systemd[1]: Started Daily Cleanup of Temporary Directories.
systemd[1]: Starting Timers.
[  OK  ] Reached target Timers.
systemd[1]: Reached target Timers.
systemd[1]: Starting Avahi mDNS/DNS-SD Stack Activation Socket.
[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
systemd[1]: Starting D-Bus System Message Bus Socket.
[  OK  ] Listening on D-Bus System Message Bus Socket.
systemd[1]: Listening on D-Bus System Message Bus Socket.
[  OK  ] Started Restore Sound Card State.
systemd[1]: Started Restore Sound Card State.
[  OK  ] Listening on sshd.socket.
systemd[1]: Listening on sshd.socket.
systemd[1]: Starting Sockets.
[  OK  ] Reached target Sockets.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Basic System.
[  OK  ] Reached target Basic System.
systemd[1]: Reached target Basic System.
systemd[1]: Starting LSB: Remove /etc/nologin at boot...
         Starting LSB: Remove /etc/nologin at boot...
systemd[1]: Starting System Logging Service...
         Starting System Logging Service...
[  OK  ] Started System Logging Service.
systemd[1]: Started System Logging Service.
systemd[1]: Starting SSH Key Generation...
         Starting SSH Key Generation...
systemd[1]: Starting Network Time Service...
         Starting Network Time Service...
systemd[1]: Starting Kernel Logging Service...
         Starting Kernel Logging Service...
[  OK  ] Started Kernel Logging Service.
systemd[1]: Started Kernel Logging Service.
systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
         Starting Avahi mDNS/DNS-SD Stack...
systemd[1]: Starting Permit User Sessions...
         Starting Permit User Sessions...
systemd[1]: Starting Login Service...
         Starting Login Service...
systemd[1]: Starting D-Bus System Message Bus...
         Starting D-Bus System Message Bus...
[  OK  ] Started D-Bus System Message Bus.
systemd[1]: Started D-Bus System Message Bus.
[  OK  ] Started LSB: Remove /etc/nologin at boot.
[  OK  ] Started Network Time Service.
[  OK  ] Started Permit User Sessions.
         Starting Getty on tty1...
[  OK  ] Started Getty on tty1.
[FAILED] Failed to start Avahi mDNS/DNS-SD Stack.
See 'systemctl status avahi-daemon.service' for details.
[  OK  ] Found device /dev/ttyO2.
         Starting Serial Getty on ttyO2...
[  OK  ] Started Serial Getty on ttyO2.
[  OK  ] Started Login Service.
mwifiex_sdio mmc1:0001:1: WLAN FW already running! Skip FW dnld
mwifiex_sdio mmc1:0001:1: WLAN FW is active
Bluetooth: vendor=0x2df, device=0x911b, class=255, fn=3
[  OK  ] Reached target Bluetooth.
mwifiex_sdio mmc1:0001:1: driver_version = mwifiex 1.0 (14.66.9.p96)
Bluetooth: hci0 command 0x1003 tx timeout
Bluetooth: hci0 command 0x1001 tx timeout
Bluetooth: hci0 command 0x1005 tx timeout
Bluetooth: hci0 command 0x1009 tx timeout
Bluetooth: hci0 command 0x0c23 tx timeout

Poky (Yocto Project Reference Distro) 1.5.1 duovero ttyO2

duovero login: Bluetooth: hci0 command 0x0c14 tx timeout
Bluetooth: hci0 command 0x0c25 tx timeout
Bluetooth: hci0 command 0x0c05 tx timeout
Bluetooth: hci0 command 0x0c16 tx timeout