daily pastebin goal
52%
SHARE
TWEET

avalon dmesg

a guest Jan 30th, 2013 1,498 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    0.000000] Linux version 3.6.11 (xiangfu@macbook) (gcc version 4.6.4 20121210 (prerelease) (Linaro GCC 4.6-2012.12) ) #30 Sun Jan 27 01:58:07 CST 2013
  2. [    0.000000] MyLoader: sysp=3dd7cb87, boardp=f0717c55, parts=4852ecbe
  3. [    0.000000] bootconsole [early0] enabled
  4. [    0.000000] CPU revision is: 00019374 (MIPS 24Kc)
  5. [    0.000000] SoC: Atheros AR9330 rev 1
  6. [    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
  7. [    0.000000] Determined physical RAM map:
  8. [    0.000000]  memory: 04000000 @ 00000000 (usable)
  9. [    0.000000] Initrd not found or empty - disabling initrd
  10. [    0.000000] Zone ranges:
  11. [    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
  12. [    0.000000] Movable zone start for each node
  13. [    0.000000] Early memory node ranges
  14. [    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
  15. [    0.000000] On node 0 totalpages: 16384
  16. [    0.000000] free_area_init_node: node 0, pgdat 802d1390, node_mem_map 81000000
  17. [    0.000000]   Normal zone: 128 pages used for memmap
  18. [    0.000000]   Normal zone: 0 pages reserved
  19. [    0.000000]   Normal zone: 16256 pages, LIFO batch:3
  20. [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  21. [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  22. [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  23. [    0.000000] pcpu-alloc: [0] 0
  24. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
  25. [    0.000000] Kernel command line:  board=TL-WR703N console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
  26. [    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  27. [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  28. [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  29. [    0.000000] __ex_table already sorted, skipping sort
  30. [    0.000000] Writing ErrCtl register=00000000
  31. [    0.000000] Readback ErrCtl register=00000000
  32. [    0.000000] Memory: 61620k/65536k available (2106k kernel code, 3916k reserved, 395k data, 212k init, 0k highmem)
  33. [    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  34. [    0.000000] NR_IRQS:51
  35. [    0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
  36. [    0.080000] pid_max: default: 32768 minimum: 301
  37. [    0.080000] Mount-cache hash table entries: 512
  38. [    0.090000] NET: Registered protocol family 16
  39. [    0.090000] MIPS: machine is TP-LINK TL-WR703N v1
  40. [    0.350000] bio: create slab <bio-0> at 0
  41. [    0.350000] Switching to clocksource MIPS
  42. [    0.360000] NET: Registered protocol family 2
  43. [    0.360000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  44. [    0.370000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  45. [    0.370000] TCP: Hash tables configured (established 2048 bind 2048)
  46. [    0.380000] TCP: reno registered
  47. [    0.380000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  48. [    0.390000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  49. [    0.400000] NET: Registered protocol family 1
  50. [    0.400000] PCI: CLS 0 bytes, default 32
  51. [    0.420000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  52. [    0.420000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  53. [    0.430000] msgmni has been set to 120
  54. [    0.440000] io scheduler noop registered
  55. [    0.440000] io scheduler deadline registered (default)
  56. [    0.450000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  57. [    0.450000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
  58. [    0.460000] console [ttyATH0] enabled, bootconsole disabled
  59. [    0.470000] ath79-spi ath79-spi: master is unqueued, this is deprecated
  60. [    0.480000] m25p80 spi0.0: found en25q32b, expected m25p80
  61. [    0.480000] m25p80 spi0.0: en25q32b (4096 Kbytes)
  62. [    0.490000] 5 tp-link partitions found on MTD device spi0.0
  63. [    0.490000] Creating 5 MTD partitions on "spi0.0":
  64. [    0.500000] 0x000000000000-0x000000020000 : "u-boot"
  65. [    0.500000] 0x000000020000-0x0000000fbe08 : "kernel"
  66. [    0.510000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  67. [    0.520000] 0x0000000fbe08-0x0000003f0000 : "rootfs"
  68. [    0.530000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  69. [    0.540000] mtd: partition "rootfs" set to be root filesystem
  70. [    0.550000] mtd: partition "rootfs_data" created automatically, ofs=3A0000, len=50000
  71. [    0.550000] 0x0000003a0000-0x0000003f0000 : "rootfs_data"
  72. [    0.560000] 0x0000003f0000-0x000000400000 : "art"
  73. [    0.570000] 0x000000020000-0x0000003f0000 : "firmware"
  74. [    0.590000] libphy: ag71xx_mdio: probed
  75. [    0.590000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
  76. [    1.150000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
  77. [    1.160000] TCP: cubic registered
  78. [    1.160000] NET: Registered protocol family 17
  79. [    1.170000] 8021q: 802.1Q VLAN Support v1.8
  80. [    1.180000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  81. [    1.180000] Freeing unused kernel memory: 212k freed
  82. [    3.450000] Registered led device: tp-link:blue:system
  83. [    6.150000] eth0: link up (100Mbps/Full duplex)
  84. [    6.750000] jffs2: notice: (414) jffs2_build_xattr_subsystem: complete building xattr subsystem, 24 of xdatum (0 unchecked, 23 orphan) and 33 of xref (0 dead, 23 orphan) found.
  85. [    6.860000] eth0: link down
  86. [    9.180000] Compat-drivers backport release: compat-drivers-2013-01-08-3
  87. [    9.190000] Backport based on wireless-testing.git master-2013-01-07
  88. [    9.190000] compat.git: wireless-testing.git
  89. [    9.220000] cfg80211: Calling CRDA to update world regulatory domain
  90. [    9.230000] cfg80211: World regulatory domain updated:
  91. [    9.230000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  92. [    9.240000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  93. [    9.250000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  94. [    9.260000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  95. [    9.260000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  96. [    9.270000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  97. [    9.540000] usbcore: registered new interface driver usbfs
  98. [    9.540000] usbcore: registered new interface driver hub
  99. [    9.550000] usbcore: registered new device driver usb
  100. [   10.180000] ath: EEPROM regdomain: 0x0
  101. [   10.180000] ath: EEPROM indicates default country code should be used
  102. [   10.180000] ath: doing EEPROM country->regdmn map search
  103. [   10.180000] ath: country maps to regdmn code: 0x3a
  104. [   10.180000] ath: Country alpha2 being used: US
  105. [   10.180000] ath: Regpair used: 0x3a
  106. [   10.180000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  107. [   10.190000] Registered led device: ath9k-phy0
  108. [   10.190000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
  109. [   10.230000] PPP generic driver version 2.4.2
  110. [   10.350000] cfg80211: Calling CRDA for country: US
  111. [   10.360000] cfg80211: Regulatory domain changed to country: US
  112. [   10.360000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  113. [   10.370000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  114. [   10.380000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
  115. [   10.380000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  116. [   10.390000] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  117. [   10.400000] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  118. [   10.410000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
  119. [   10.540000] ip_tables: (C) 2000-2006 Netfilter Core Team
  120. [   10.790000] NET: Registered protocol family 24
  121. [   10.810000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  122. [   10.820000] ehci-platform ehci-platform: Generic Platform EHCI Controller
  123. [   10.820000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
  124. [   10.860000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
  125. [   10.880000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
  126. [   10.880000] hub 1-0:1.0: USB hub found
  127. [   10.880000] hub 1-0:1.0: 1 port detected
  128. [   10.910000] nf_conntrack version 0.5.0 (966 buckets, 3864 max)
  129. [   11.360000] usb 1-1: new high-speed USB device number 2 using ehci-platform
  130. [   11.370000] usbcore: registered new interface driver usbserial
  131. [   11.370000] usbcore: registered new interface driver usbserial_generic
  132. [   11.380000] USB Serial support registered for generic
  133. [   11.390000] usbserial: USB Serial Driver core
  134. [   11.510000] usbcore: registered new interface driver ftdi_sio
  135. [   11.510000] USB Serial support registered for FTDI USB Serial Device
  136. [   11.520000] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
  137. [   11.590000] hub 1-1:1.0: USB hub found
  138. [   11.590000] hub 1-1:1.0: 4 ports detected
  139. [   11.870000] usb 1-1.1: new full-speed USB device number 3 using ehci-platform
  140. [   11.980000] ftdi_sio 1-1.1:1.0: FTDI USB Serial Device converter detected
  141. [   11.990000] usb 1-1.1: Detected FT232RL
  142. [   11.990000] usb 1-1.1: Number of endpoints 2
  143. [   12.000000] usb 1-1.1: Endpoint 1 MaxPacketSize 16384
  144. [   12.000000] usb 1-1.1: Endpoint 2 MaxPacketSize 16384
  145. [   12.010000] usb 1-1.1: Setting MaxPacketSize 64
  146. [   12.010000] usb 1-1.1: FTDI USB Serial Device converter now attached to ttyUSB0
  147. [   16.880000] device eth0 entered promiscuous mode
  148. [   17.500000] eth0: link up (100Mbps/Full duplex)
  149. [   17.500000] br-lan: port 1(eth0) entered forwarding state
  150. [   17.510000] br-lan: port 1(eth0) entered forwarding state
  151. [   19.510000] br-lan: port 1(eth0) entered forwarding state
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top