Create a new version of paste:

[    0.000000] Linux version 3.6.11 (xiangfu@macbook) (gcc version 4.6.4 20121210 (prerelease) (Linaro GCC 4.6-2012.12) ) #30 Sun Jan 27 01:58:07 CST 2013
[    0.000000] MyLoader: sysp=3dd7cb87, boardp=f0717c55, parts=4852ecbe
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR9330 rev 1
[    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
[    0.000000] On node 0 totalpages: 16384
[    0.000000] free_area_init_node: node 0, pgdat 802d1390, node_mem_map 81000000
[    0.000000]   Normal zone: 128 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 16256 pages, LIFO batch:3
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line:  board=TL-WR703N console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 61620k/65536k available (2106k kernel code, 3916k reserved, 395k data, 212k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[    0.080000] pid_max: default: 32768 minimum: 301
[    0.080000] Mount-cache hash table entries: 512
[    0.090000] NET: Registered protocol family 16
[    0.090000] MIPS: machine is TP-LINK TL-WR703N v1
[    0.350000] bio: create slab <bio-0> at 0
[    0.350000] Switching to clocksource MIPS
[    0.360000] NET: Registered protocol family 2
[    0.360000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.370000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.370000] TCP: Hash tables configured (established 2048 bind 2048)
[    0.380000] TCP: reno registered
[    0.380000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.390000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.400000] NET: Registered protocol family 1
[    0.400000] PCI: CLS 0 bytes, default 32
[    0.420000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.420000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.430000] msgmni has been set to 120
[    0.440000] io scheduler noop registered
[    0.440000] io scheduler deadline registered (default)
[    0.450000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.450000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
[    0.460000] console [ttyATH0] enabled, bootconsole disabled
[    0.470000] ath79-spi ath79-spi: master is unqueued, this is deprecated
[    0.480000] m25p80 spi0.0: found en25q32b, expected m25p80
[    0.480000] m25p80 spi0.0: en25q32b (4096 Kbytes)
[    0.490000] 5 tp-link partitions found on MTD device spi0.0
[    0.490000] Creating 5 MTD partitions on "spi0.0":
[    0.500000] 0x000000000000-0x000000020000 : "u-boot"
[    0.500000] 0x000000020000-0x0000000fbe08 : "kernel"
[    0.510000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.520000] 0x0000000fbe08-0x0000003f0000 : "rootfs"
[    0.530000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.540000] mtd: partition "rootfs" set to be root filesystem
[    0.550000] mtd: partition "rootfs_data" created automatically, ofs=3A0000, len=50000 
[    0.550000] 0x0000003a0000-0x0000003f0000 : "rootfs_data"
[    0.560000] 0x0000003f0000-0x000000400000 : "art"
[    0.570000] 0x000000020000-0x0000003f0000 : "firmware"
[    0.590000] libphy: ag71xx_mdio: probed
[    0.590000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    1.150000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
[    1.160000] TCP: cubic registered
[    1.160000] NET: Registered protocol family 17
[    1.170000] 8021q: 802.1Q VLAN Support v1.8
[    1.180000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    1.180000] Freeing unused kernel memory: 212k freed
[    3.450000] Registered led device: tp-link:blue:system
[    6.150000] eth0: link up (100Mbps/Full duplex)
[    6.750000] jffs2: notice: (414) jffs2_build_xattr_subsystem: complete building xattr subsystem, 24 of xdatum (0 unchecked, 23 orphan) and 33 of xref (0 dead, 23 orphan) found.
[    6.860000] eth0: link down
[    9.180000] Compat-drivers backport release: compat-drivers-2013-01-08-3
[    9.190000] Backport based on wireless-testing.git master-2013-01-07
[    9.190000] compat.git: wireless-testing.git
[    9.220000] cfg80211: Calling CRDA to update world regulatory domain
[    9.230000] cfg80211: World regulatory domain updated:
[    9.230000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    9.240000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.250000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    9.260000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    9.260000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.270000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.540000] usbcore: registered new interface driver usbfs
[    9.540000] usbcore: registered new interface driver hub
[    9.550000] usbcore: registered new device driver usb
[   10.180000] ath: EEPROM regdomain: 0x0
[   10.180000] ath: EEPROM indicates default country code should be used
[   10.180000] ath: doing EEPROM country->regdmn map search
[   10.180000] ath: country maps to regdmn code: 0x3a
[   10.180000] ath: Country alpha2 being used: US
[   10.180000] ath: Regpair used: 0x3a
[   10.180000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.190000] Registered led device: ath9k-phy0
[   10.190000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[   10.230000] PPP generic driver version 2.4.2
[   10.350000] cfg80211: Calling CRDA for country: US
[   10.360000] cfg80211: Regulatory domain changed to country: US
[   10.360000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   10.370000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   10.380000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[   10.380000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.390000] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.400000] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.410000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[   10.540000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   10.790000] NET: Registered protocol family 24
[   10.810000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   10.820000] ehci-platform ehci-platform: Generic Platform EHCI Controller
[   10.820000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[   10.860000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[   10.880000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[   10.880000] hub 1-0:1.0: USB hub found
[   10.880000] hub 1-0:1.0: 1 port detected
[   10.910000] nf_conntrack version 0.5.0 (966 buckets, 3864 max)
[   11.360000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[   11.370000] usbcore: registered new interface driver usbserial
[   11.370000] usbcore: registered new interface driver usbserial_generic
[   11.380000] USB Serial support registered for generic
[   11.390000] usbserial: USB Serial Driver core
[   11.510000] usbcore: registered new interface driver ftdi_sio
[   11.510000] USB Serial support registered for FTDI USB Serial Device
[   11.520000] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
[   11.590000] hub 1-1:1.0: USB hub found
[   11.590000] hub 1-1:1.0: 4 ports detected
[   11.870000] usb 1-1.1: new full-speed USB device number 3 using ehci-platform
[   11.980000] ftdi_sio 1-1.1:1.0: FTDI USB Serial Device converter detected
[   11.990000] usb 1-1.1: Detected FT232RL
[   11.990000] usb 1-1.1: Number of endpoints 2
[   12.000000] usb 1-1.1: Endpoint 1 MaxPacketSize 16384
[   12.000000] usb 1-1.1: Endpoint 2 MaxPacketSize 16384
[   12.010000] usb 1-1.1: Setting MaxPacketSize 64
[   12.010000] usb 1-1.1: FTDI USB Serial Device converter now attached to ttyUSB0
[   16.880000] device eth0 entered promiscuous mode
[   17.500000] eth0: link up (100Mbps/Full duplex)
[   17.500000] br-lan: port 1(eth0) entered forwarding state
[   17.510000] br-lan: port 1(eth0) entered forwarding state
[   19.510000] br-lan: port 1(eth0) entered forwarding state