Replace rear brake pads (MIT)

To replace rear brake pads on mitsubishi::
tools needed:
- 14mm socket
- 3/8 ratchet
- 17mm thin wrench
- 5mm allen key
- 5mm allen socket
- Big flat head screw driver
- t40 torx socket
- extra jack stand


method::
- disconnect neg terminal on battery
- remove back of brake actuator cover (5mm allen)
- turn the t40 screw on back of caliper clockwise
- push brake caliper in with long flat screw driver (while caliper is still on)
- once the caliper piston is all the way in
- remove the two 14mm bolts and remove caliper
- install new pads
- push slider pins all the way in (must go all the way inn)
- install caliper