dmesg

---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.3-RELEASE releng/14.3-n271432-8c9ce319fef7 GENERIC amd64
FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2)
VT(efifb): resolution 1366x768
CPU: AMD 3020e with Radeon Graphics                  (1197.82-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x820f01  Family=0x17  Model=0x20  Stepping=1
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX>
  Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  AMD Extended Feature Extensions ID EBX=0x29007<CLZERO,IRPerf,XSaveErPtr,IBPB,STIBP,STIBP_ALWAYSON>
  SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 6123999232 (5840 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HPQOEM 85EA    >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0: MADT APIC ID 33 != hw id 0
ioapic1: MADT APIC ID 34 != hw id 0
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 1
Cuse v0.1.37 @ /dev/cuse
random: entropy device external interface
kbd1 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0xae23a000-0xae23a017
smbios0: Entry point: v3 (64-bit), Version: 3.1
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <HPQOEM SLIC-MPC>
Firmware Error (ACPI): Could not resolve symbol [\134_SB.PCI0.GPP2.BCM5], AE_NOT_FOUND (20221020/dswload2-315)
ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-372)
Firmware Error (ACPI): Could not resolve symbol [\134_SB.PCI0.GPP1.DEV0], AE_NOT_FOUND (20221020/dswload2-315)
ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-372)
acpi0: Power Button (fixed)
Firmware Error (ACPI): Could not resolve symbol [\134_SB.WLBU._STA.WLVD], AE_NOT_FOUND (20221020/psargs-503)
ACPI Error: Aborting method \134_SB.WLBU._STA due to previous error (AE_NOT_FOUND) (20221020/psparse-689)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 450
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.3 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <network> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci2: <ACPI PCI bus> on pcib2
vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem 0xb0000000-0xbfffffff,0xc0000000-0xc01fffff,0xc0500000-0xc057ffff at device 0.0 on pci2
hdac0: <ATI (0x15de) HDA Controller> mem 0xc05c8000-0xc05cbfff at device 0.1 on pci2
pci2: <encrypt/decrypt> at device 0.2 (no driver attached)
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xc0300000-0xc03fffff at device 0.3 on pci2
xhci0: 64 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
xhci_interrupt: host controller halted
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci2: <multimedia> at device 0.5 (no driver attached)
hdac1: <AMD Raven HDA Controller> mem 0xc05c0000-0xc05c7fff at device 0.6 on pci2
pcib3: <ACPI PCI-PCI bridge> at device 8.2 on pci0
pci3: <ACPI PCI bus> on pcib3
ahci0: <AMD KERNCZ AHCI SATA controller> mem 0xc0200000-0xc02007ff at device 0.0 on pci3
ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
ahcich0: <AHCI channel> at channel 0 on ahci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _CRT value is absurd, ignored (226.9C)
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
driver bug: Unable to set devclass (class: atkbdc devname: (unknown))
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 15.0.
psm0: model Synaptics Touchpad, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
cpufreq0: <CPU frequency control> on cpu0
Timecounter "TSC" frequency 1197750073 Hz quality 1000
Timecounters tick every 1.000 msec
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC236 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC236 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC236 (Analog)> at nid 20 and 25 on hdaa1
pcm2: <Realtek ALC236 (Analog)> at nid 33 and 18 on hdaa1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <TOSHIBA MQ04ABF100 JU007C> ACS-3 ATA SATA 3.x device
ada0: Serial Number 51LYTTHIT
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ugen0.1: <AMD XHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
Trying to mount root from ufs:/dev/ada0p3 [rw]...
uhub0: 10 ports with 10 removable, self powered
ugen0.2: <LITEON Technology USB Keyboard> at usbus0
ukbd0 on uhub0
ukbd0: <LITEON Technology USB Keyboard, class 0/0, rev 2.00/1.14, addr 1> on usbus0
kbd2 at ukbd0
ugen0.3: <Wacom Co.,Ltd. Intuos BT S> at usbus0
ugen0.4: <Asmedia ASM105X series> at usbus0
umass0 on uhub0
umass0: <Asmedia ASM105X series, class 0/0, rev 2.00/1.00, addr 3> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x0000
umass0:1:0: Attached to scbus1
cd0 at umass-sim0 bus 0 scbus1 target 0 lun 0
cd0: <hp DVDRW GUE1N UE03> Removable CD-ROM SCSI device
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
cd0: quirks=0x10<10_BYTE_ONLY>
[drm] amdgpu kernel modesetting enabled.
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
[drm] initializing kernel modesetting (RAVEN 0x1002:0x15D8 0x103C:0x87CE 0xDF).
[drm] register mmio base: 0xC0500000
[drm] register mmio size: 524288
[drm] add ip block number 0 <soc15_common>
[drm] add ip block number 1 <gmc_v9_0>
[drm] add ip block number 2 <vega10_ih>
[drm] add ip block number 3 <psp>
[drm] add ip block number 4 <powerplay>
[drm] add ip block number 5 <dm>
[drm] add ip block number 6 <gfx_v9_0>
[drm] add ip block number 7 <sdma_v4_0>
[drm] add ip block number 8 <vcn_v1_0>
amdgpu/raven2_gpu_info.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_gpu_info.bin either
raven2_gpu_info.bin: could not load binary firmware /boot/firmware/raven2_gpu_info.bin either
amdgpu_raven2_gpu_info.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_gpu_info.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_gpu_info.bin'
drmn0: Fetched VBIOS from VFCT
amdgpu: ATOM BIOS: 113-RAVEN2-117
amdgpu/raven2_sdma.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_sdma.bin either
raven2_sdma.bin: could not load binary firmware /boot/firmware/raven2_sdma.bin either
amdgpu_raven2_sdma.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_sdma.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_sdma.bin'
[drm] VCN decode is enabled in VM mode
[drm] VCN encode is enabled in VM mode
[drm] JPEG decode is enabled in VM mode
drmn0: Trusted Memory Zone (TMZ) feature enabled
drmn0: PCIE atomic ops is not supported
[drm] vm size is 262144 GB, 3 levels, block size is 9-bit, fragment size is 9-bit
drmn0: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
drmn0: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
drmn0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[drm ERROR :amdgpu_bo_init] Unable to set WC memtype for the aperture base
[drm] Detected VRAM RAM=2048M, BAR=2048M
[drm] RAM width 64bits DDR4
[drm] amdgpu: 2048M of VRAM memory ready
[drm] amdgpu: 3072M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled.
[drm] PTB located at 0x000000F400A00000
amdgpu/raven2_asd.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_asd.bin either
raven2_asd.bin: could not load binary firmware /boot/firmware/raven2_asd.bin either
amdgpu_raven2_asd.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_asd.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_asd.bin'
amdgpu/raven2_ta.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_ta.bin either
raven2_ta.bin: could not load binary firmware /boot/firmware/raven2_ta.bin either
amdgpu_raven2_ta.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_ta.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_ta.bin'
drmn0: PSP runtime database doesn't exist
drmn0: PSP runtime database doesn't exist
amdgpu: hwmgr_sw_init smu backed is smu10_smu
amdgpu/raven_dmcu.bin: could not load binary firmware /boot/firmware/amdgpu/raven_dmcu.bin either
raven_dmcu.bin: could not load binary firmware /boot/firmware/raven_dmcu.bin either
amdgpu_raven_dmcu.bin: could not load binary firmware /boot/firmware/amdgpu_raven_dmcu.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven_dmcu.bin'
amdgpu/raven2_pfp.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_pfp.bin either
raven2_pfp.bin: could not load binary firmware /boot/firmware/raven2_pfp.bin either
amdgpu_raven2_pfp.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_pfp.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_pfp.bin'
amdgpu/raven2_me.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_me.bin either
raven2_me.bin: could not load binary firmware /boot/firmware/raven2_me.bin either
amdgpu_raven2_me.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_me.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_me.bin'
amdgpu/raven2_ce.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_ce.bin either
raven2_ce.bin: could not load binary firmware /boot/firmware/raven2_ce.bin either
amdgpu_raven2_ce.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_ce.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_ce.bin'
amdgpu/raven2_rlc.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_rlc.bin either
raven2_rlc.bin: could not load binary firmware /boot/firmware/raven2_rlc.bin either
amdgpu_raven2_rlc.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_rlc.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_rlc.bin'
amdgpu/raven2_mec.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_mec.bin either
raven2_mec.bin: could not load binary firmware /boot/firmware/raven2_mec.bin either
amdgpu_raven2_mec.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_mec.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_mec.bin'
amdgpu/raven2_mec2.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_mec2.bin either
raven2_mec2.bin: could not load binary firmware /boot/firmware/raven2_mec2.bin either
amdgpu_raven2_mec2.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_mec2.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_mec2.bin'
amdgpu/raven2_vcn.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_vcn.bin either
raven2_vcn.bin: could not load binary firmware /boot/firmware/raven2_vcn.bin either
amdgpu_raven2_vcn.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_vcn.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_vcn.bin'
[drm] Found VCN firmware Version ENC: 1.13 DEC: 2 VEP: 0 Revision: 4
drmn0: Will use PSP to load VCN firmware
[drm] reserve 0x400000 from 0xf47fc00000 for PSP TMR
[drm] failed to load ucode RLC_RESTORE_LIST_CNTL(0x28) <4>[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF300F)
[drm] failed to load ucode RLC_RESTORE_LIST_GPM_MEM(0x29) <4>[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
[drm] failed to load ucode RLC_RESTORE_LIST_SRM_MEM(0x2A) <4>[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
drmn0: RAS: optional ras ta ucode is not available
drmn0: RAP: optional rap ta ucode is not available
drmn0: SECUREDISPLAY: securedisplay ta ucode is not available
[drm] DM_PPLIB: values for F clock
[drm] DM_PPLIB:	 400000 in kHz, 3174 in mV
[drm] DM_PPLIB:	 933000 in kHz, 3724 in mV
[drm] DM_PPLIB:	 1067000 in kHz, 3924 in mV
[drm] DM_PPLIB:	 1200000 in kHz, 4074 in mV
[drm] DM_PPLIB: values for DCF clock
[drm] DM_PPLIB:	 300000 in kHz, 3174 in mV
[drm] DM_PPLIB:	 600000 in kHz, 3724 in mV
[drm] DM_PPLIB:	 626000 in kHz, 3924 in mV
[drm] DM_PPLIB:	 654000 in kHz, 4074 in mV
[drm] Display Core initialized with v3.2.207!
lkpi_iic0: <LinuxKPI I2C> on drmn0
iicbus0: <Philips I2C bus> on lkpi_iic0
iic0: <I2C generic I/O> on iicbus0
ugen0.5: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/88.32, addr 4> on usbus0
lkpi_iic1: <LinuxKPI I2C> on drmn0
iicbus1: <Philips I2C bus> on lkpi_iic1
iic1: <I2C generic I/O> on iicbus1
[drm] kiq ring mec 2 pipe 1 q 0
[drm] VCN decode and encode initialized successfully(under SPG Mode).
drmn0: SE 1, SH per SE 1, CU per SH 3, active_cu_number 3
drmn0: ring gfx uses VM inv eng 0 on hub 0
drmn0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
drmn0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
drmn0: ring comp_1.2.0 uses VM inv eng 5 on hub 0
drmn0: ring comp_1.3.0 uses VM inv eng 6 on hub 0
drmn0: ring comp_1.0.1 uses VM inv eng 7 on hub 0
drmn0: ring comp_1.1.1 uses VM inv eng 8 on hub 0
drmn0: ring comp_1.2.1 uses VM inv eng 9 on hub 0
drmn0: ring comp_1.3.1 uses VM inv eng 10 on hub 0
drmn0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
drmn0: ring sdma0 uses VM inv eng 0 on hub 1
drmn0: ring vcn_dec uses VM inv eng 1 on hub 1
drmn0: ring vcn_enc0 uses VM inv eng 4 on hub 1
drmn0: ring vcn_enc1 uses VM inv eng 5 on hub 1
drmn0: ring jpeg_dec uses VM inv eng 6 on hub 1
vgapci0: child drmn0 requested pci_get_powerstate
sysctl_add_oid: can't re-use a leaf (hw.dri.debug)!
lkpi_iic2: <LinuxKPI I2C> on drm1
iicbus2: <Philips I2C bus> on lkpi_iic2
iic2: <I2C generic I/O> on iicbus2
[drm] Initialized amdgpu 3.49.0 20150101 for drmn0 on minor 0
VT: Replacing driver "efifb" with new "drmfb".
start FB_INFO:
height=768 width=1366 depth=32
pbase=0x0 vbase=0xfffffe0114026000
name=drmn0 id=amdgpudrmfb flags=0x0 stride=5632
end FB_INFO
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
rtw880: <rtw_8821ce> port 0x2000-0x20ff mem 0xc0600000-0xc060ffff at device 0.0 on pci1
rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin'
rtw880: Firmware version 24.11.0, H2C version 12
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: Embedded MOF found
ACPI: \134_SB.WMID.WQAB: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361)
uhub1: 4 ports with 4 removable, self powered
ugen0.6: <SunplusIT Inc HP TrueVision HD Camera> at usbus0
ugen0.7: <Realtek Bluetooth Radio> at usbus0
wlan0: Ethernet address: 00:e9:3a:db:06:fb
lo0: link state changed to UP
uhid0 on uhub0
uhid0: <Wacom Co.,Ltd. Intuos BT S, class 0/0, rev 2.00/1.11, addr 2> on usbus0
wlan0: link state changed to UP