Restarting printer
Start printer at Wed Apr 29 17:39:43 2026 (1777498783.6 53.9)
===== Config file =====
[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[respond]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = BASE_CANCEL_PRINT
gcode =
	SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout}
	CLEAR_PAUSE
	SDCARD_RESET_FILE
	PRINT_END
	BASE_CANCEL_PRINT

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = BASE_PAUSE
variable_restore_idle_timeout = 0
gcode =
	PAUSE_TUNE
	{% set z = params.Z|default(30)|int %}
	{% if printer['pause_resume'].is_paused|int == 0 %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=etemp VALUE={printer['extruder'].target|default(220)}

	SET_GCODE_VARIABLE MACRO=LOAD_FILAMENT VARIABLE=prev_temp VALUE={printer['extruder'].target|default(220)}
	SET_GCODE_VARIABLE MACRO=UNLOAD_FILAMENT VARIABLE=prev_temp VALUE={printer['extruder'].target|default(220)}

	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=zhop VALUE={z}
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	SAVE_GCODE_STATE NAME=PAUSE
	BASE_PAUSE
	G91
	{% if (printer.gcode_move.position.z + z) < printer.toolhead.axis_maximum.z %}
	G1 E-2 F2700
	G1 X3 Y3 F3000
	G1 E-2 Z{z} F1600
	SAVE_GCODE_STATE NAME=ZLIFT
	{% else %}
	{ action_respond_info("Pause zhop exceeds maximum Z height.") }
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=zhop VALUE=0
	G1 E-2 F2700
	G1 X3 Y3 F3000
	G1 E-2 F1600
	SAVE_GCODE_STATE NAME=ZLIFT
	{% endif %}
	G90
	G1 X{printer.toolhead.axis_minimum.x+5} Y{printer.toolhead.axis_maximum.y-5} F6000
	SAVE_GCODE_STATE NAME=PAUSEPARK
	SET_HEATER_TEMPERATURE HEATER=extruder TARGET=175
	SET_IDLE_TIMEOUT TIMEOUT=43200
	{% endif %}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = BASE_RESUME
variable_last_extruder_temp = {'restore': False, 'temp': 0}
gcode =
	{% if printer['pause_resume'].is_paused|int == 1 %}
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=1
	SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout}
	{% if etemp > 0 %}
	SET_HEATER_TEMPERATURE HEATER=extruder TARGET={etemp|int}
	TEMPERATURE_WAIT SENSOR=extruder MINIMUM={etemp|int - 4} MAXIMUM={etemp|int + 10}
	{% endif %}
	RESTORE_GCODE_STATE NAME=PAUSEPARK MOVE=1 MOVE_SPEED=100
	G91
	M83
	G1 E80  F200
	G4 P2000
	G1 X20 F15000
	G1 X-20
	G1 X20
	G1 X-20
	G1 X20
	G1 X-20
	RESTORE_GCODE_STATE NAME=ZLIFT MOVE=1 MOVE_SPEED=60
	G1 X-3 Y-3 F3000
	G1 Z{zhop * -1} F900
	RESTORE_GCODE_STATE NAME=PAUSE MOVE=1 MOVE_SPEED=60
	M400
	BASE_RESUME
	{% endif %}
variable_restore_idle_timeout = 0
variable_idle_state = False
variable_zhop = 0
variable_etemp = 0

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode =
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1)|int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode =
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode =
	{% if pause_next_layer.enable %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_next_layer" % pause_next_layer.call}'
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER | int == pause_at_layer.layer %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer)}'
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode =

	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] | default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos | default(false) | lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x | default(0.0) %}
	{% set custom_park_y  = client.custom_park_y | default(0.0) %}
	{% set park_dz        = client.custom_park_dz | default(2.0) | abs %}
	{% set sp_hop         = client.speed_hop | default(15) * 60 %}
	{% set sp_move        = client.speed_move | default(velocity) * 60 %}

	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z | default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}

	{% set z_min = params.Z_MIN | default(0) | float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)] | min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}

	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='Printer not homed'
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode =

	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] | default({}) %}
	{% set use_fw_retract = (client.use_fw_retract | default(false) | lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH | default(client.unretract) | default(1.0) | float %}
	{% set speed = params.SPEED | default(client.speed_unretract) | default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}

	{% if printer.toolhead.extruder != '' %}
	{% if printer[printer.toolhead.extruder].can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed | float | abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='{"\"%s\" not hot enough" % printer.toolhead.extruder}'
	{% endif %}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode =
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] | default({}) %}
	{% set length = params.LENGTH | default(client.retract) | default(1.0) | float %}
	{% set speed = params.SPEED | default(client.speed_retract) | default(35) %}

	_CLIENT_EXTRUDE LENGTH=-{length | float | abs} SPEED={speed | float | abs}

[gcode_macro _CLIENT_LINEAR_MOVE]
description = Linear move with save and restore of the gcode state
gcode =
	{% set x_move = "X" ~ params.X if params.X is defined else "" %}
	{% set y_move = "Y" ~ params.Y if params.Y is defined else "" %}
	{% set z_move = "Z" ~ params.Z if params.Z is defined else "" %}
	{% set e_move = "E" ~ params.E if params.E is defined else "" %}
	{% set rate = "F" ~ params.F if params.F is defined else "" %}
	{% set ABSOLUTE = params.ABSOLUTE | default(0) | int != 0 %}
	{% set ABSOLUTE_E = params.ABSOLUTE_E | default(0) | int != 0 %}
	SAVE_GCODE_STATE NAME=_client_movement
	{% if x_move or y_move or z_move %}
	G9{ 0 if ABSOLUTE else 1 }
	{% endif %}
	{% if e_move %}
	M8{ 2 if ABSOLUTE_E else 3 }
	{% endif %}
	G1 { x_move } { y_move } { z_move } { e_move } { rate }
	RESTORE_GCODE_STATE NAME=_client_movement

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 5
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 1.8
variable_purge_margin = 15
variable_purge_amount = 30
variable_flow_rate = 15
variable_smart_park_height = 10
gcode =

	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode =

	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}

	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}


	{% if verbose_enable == True %}

	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }

	{% endif %}

	SAVE_GCODE_STATE NAME=Presmartpark_State

	G90
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

	RESTORE_GCODE_STATE NAME=Presmartpark_State

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode =

	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}


	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}


	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}



	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}

	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}

	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}


	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}

	{% if cross_section < 5 %}

	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}

	{% else %}

	{% if verbose_enable == True %}

	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}

	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}

	{% if purge_y_origin > 0 %}

	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm3/s.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }

	{% else %}

	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm3/s.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }

	{% endif %}

	SAVE_GCODE_STATE NAME=Prepurge_State

	{% if purge_y_origin > 0 %}

	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}

	{% else %}

	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}

	{% endif %}

	RESTORE_GCODE_STATE NAME=Prepurge_State

	{% endif %}

[mcu]
serial = /dev/ttyS0
baud = 250000
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 250
max_accel = 3000
max_z_velocity = 8
max_z_accel = 120
square_corner_velocity = 5.0
minimum_cruise_ratio = 0.0

[gcode_arcs]

[exclude_object]

[firmware_retraction]

[force_move]
enable_force_move = True

[idle_timeout]
timeout = 2100

[gcode_macro PRINT_START]
gcode =
	Frame_Light_ON
	Part_Light_ON
	G92 E0
	G90
	BED_MESH_CLEAR

	{% set BED_TEMP = params.BED_TEMP|default(60)|float %}
	{% set BED_HEAT_SOAK_MINUTES = params.BED_HEAT_SOAK_MINUTES|default(0)|float %}
	{% set BED_MESH = params.BED_MESH|default('adaptive')|string %}
	{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(200)|float %}


	SET_BED_TEMPERATURE TARGET={BED_TEMP}
	BED_TEMPERATURE_WAIT MINIMUM={BED_TEMP-2} MAXIMUM={BED_TEMP+4}
	{% if BED_HEAT_SOAK_MINUTES > 0 %}
	RESPOND MSG="Waiting {BED_HEAT_SOAK_MINUTES} minutes for the bed to settle."
	G4 P{BED_HEAT_SOAK_MINUTES * 60000}
	{% endif %}

	CG28

	{% if BED_MESH == 'full' %}
	BED_MESH_CALIBRATE
	{% elif BED_MESH == 'adaptive' %}
	BED_MESH_CALIBRATE ADAPTIVE=1
	{% elif BED_MESH != 'none' %}
	BED_MESH_PROFILE LOAD={BED_MESH}
	{% endif %}
	Smart_Park
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=1
	SET_HEATER_TEMPERATURE HEATER=extruder TARGET={EXTRUDER_TEMP}
	TEMPERATURE_WAIT SENSOR=extruder MINIMUM={EXTRUDER_TEMP-4} MAXIMUM={EXTRUDER_TEMP+10}
	LINE_PURGE
	G92 E0
	G1 Z2.0 F3000
	M117 Printing

[gcode_macro PRINT_END]
gcode =
	Frame_Light_OFF
	Part_Light_OFF
	M400
	TURN_OFF_HEATERS
	G92 E0
	G91
	G1 E-2 F2700
	G1 X5 Y5 F3000
	G1 E-2 Z0.2 F1600
	G1 Z4 F3000
	G90
	G1 X0 Y415
	M107
	M84
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	M117
	END_TUNE

[filament_switch_sensor filament_sensor]
pause_on_runout = True
insert_gcode =
	M117 Insert Detected
runout_gcode =
	M117 Runout Detected
	SET_GCODE_VARIABLE MACRO=UNLOAD_FILAMENT VARIABLE=prev_temp VALUE={printer.extruder.target|int}
	UNLOAD_FILAMENT
event_delay = 3.0
pause_delay = 1.0
switch_pin = PA12

[delayed_gcode DISABLE_FILAMENT_SENSOR]
initial_duration = 1
gcode =
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0

[gcode_macro M600]
description = Pause for colour change
gcode =
	PAUSE

[gcode_macro LOAD_FILAMENT]
variable_prev_temp = 0
variable_load_distance = 25
variable_purge_distance = 75
gcode =
	{%

	set target_temp = prev_temp|int or printer.extruder.target|round(0) or 220
	%}
	{% if prev_temp|int == 0 and printer.extruder.target|round(0) == 0 %}
	RESPOND PREFIX="LOAD_FILAMENT" MSG="No temp set — defaulting to {target_temp}°C"
	{% endif %}
	SET_HEATER_TEMPERATURE HEATER=extruder TARGET={target_temp}
	TEMPERATURE_WAIT SENSOR=extruder MINIMUM={target_temp - 4} MAXIMUM={target_temp + 40}
	{% set speed = params.SPEED|default(300) %}
	{% set max_vel = printer.configfile.settings.extruder.max_extrude_only_velocity * 30 %}
	SAVE_GCODE_STATE NAME=load_state
	G91
	G92 E0
	G1 E{load_distance} F{max_vel}
	G1 E{purge_distance} F{speed}
	RESTORE_GCODE_STATE NAME=load_state

[gcode_macro UNLOAD_FILAMENT]
variable_prev_temp = 0
variable_unload_distance = 75
variable_purge_distance = 15
gcode =
	{%
	set target_temp = prev_temp|int or printer.extruder.target|round(0) or 220
	%}
	{% if prev_temp|int == 0 and printer.extruder.target|round(0) == 0 %}
	RESPOND PREFIX="UNLOAD_FILAMENT" MSG="No temp set — defaulting to {target_temp}°C"
	{% endif %}
	SET_HEATER_TEMPERATURE HEATER=extruder TARGET={target_temp}
	TEMPERATURE_WAIT SENSOR=extruder MINIMUM={target_temp - 4} MAXIMUM={target_temp + 40}
	{% set speed = params.SPEED|default(300) %}
	{% set max_vel = printer.configfile.settings.extruder.max_extrude_only_velocity * 30 %}
	SAVE_GCODE_STATE NAME=unload_state
	G91
	G92 E0
	G1 E{purge_distance} F{speed}
	G1 E-{unload_distance} F{max_vel}
	RESTORE_GCODE_STATE NAME=unload_state
	{% if printer['pause_resume'].is_paused|int == 1 %}
	G4 P3000
	SET_HEATER_TEMPERATURE HEATER=extruder TARGET=175
	{% endif %}

[stepper_x]
step_pin = PC14
dir_pin = PC13
enable_pin = !PC15
microsteps = 16
rotation_distance = 40
full_steps_per_rotation = 200
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_min = -2
position_endstop = 0
position_max = 430
homing_speed = 50
homing_retract_dist = 0
homing_positive_dir = false

[stepper_y]
step_pin = PB4
dir_pin = PB3
enable_pin = !PC15
microsteps = 16
rotation_distance = 40
full_steps_per_rotation = 200
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_min = -2
position_endstop = 0
position_max = 430
homing_speed = 50
homing_retract_dist = 0
homing_positive_dir = false

[stepper_z]
step_pin = PC10
dir_pin = !PA13
enable_pin = !PC11
microsteps = 16
rotation_distance = 8
full_steps_per_rotation = 200
endstop_pin = probe:z_virtual_endstop
position_max = 505
position_min = -5
homing_speed = 8
second_homing_speed = 3
homing_retract_dist = 5

[tmc2209 stepper_x]
uart_pin = PB9
run_current = 1.0
interpolate = True
stealthchop_threshold = 999999
driver_sgthrs = 90
diag_pin = ^PC0

[tmc2209 stepper_y]
uart_pin = PD2
run_current = 1.1
interpolate = True
stealthchop_threshold = 999999
driver_sgthrs = 80
diag_pin = ^PB8

[tmc2209 stepper_z]
uart_pin = PC5
run_current = 0.8
interpolate = True

[tmc2209 extruder]
uart_pin = PC4
run_current = 0.8
interpolate = false

[extruder]
step_pin = PA5
dir_pin = !PA6
enable_pin = !PA4
microsteps = 16
rotation_distance = 28.888
gear_ratio = 52:10
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
min_temp = 0
max_temp = 330
heater_pin = PA7
sensor_type = NTC 100K MGB18-104F39050L32
sensor_pin = PA1
max_power = 1
pressure_advance = 0.02725
pressure_advance_smooth_time = 0.02
max_extrude_cross_section = 5
instantaneous_corner_velocity = 5.0
max_extrude_only_distance = 100
max_extrude_only_velocity = 45
max_extrude_only_accel = 2000
step_pulse_duration = 0.000002
control = pid
pid_kp = 30.442
pid_ki = 5.074
pid_kd = 45.663

[verify_heater extruder]
max_error = 30
check_gain_time = 10
hysteresis = 10
heating_gain = 2

[heater_bed]
heater_pin = PB10
sensor_type = NTC 100K MGB18-104F39050L32
sensor_pin = PA0
max_power = 1.0
min_temp = 0
max_temp = 120
pwm_cycle_time = 0.3
control = pid
pid_kp = 74.026
pid_ki = 0.504
pid_kd = 2720.443

[verify_heater heater_bed]
max_error = 120
check_gain_time = 120
hysteresis = 10
heating_gain = 2

[gcode_macro SET_BED_TEMPERATURE]
gcode =
	SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={params.TARGET}

[gcode_macro BED_TEMPERATURE_WAIT]
gcode =
	{% if params.MINIMUM is defined and params.MAXIMUM is defined %}
	TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={params.MINIMUM} MAXIMUM={params.MAXIMUM}
	{% elif params.MINIMUM is defined %}
	TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={params.MINIMUM}
	{% elif params.MAXIMUM is defined %}
	TEMPERATURE_WAIT SENSOR=heater_bed MAXIMUM={params.MAXIMUM}
	{% else %}
	RESPOND TYPE=error MSG="Error on 'BED_TEMPERATURE_WAIT': missing MINIMUM or MAXIMUM."
	{% endif %}

[probe]
pin = ^PA11
x_offset = -24.25
y_offset = 20.45
speed = 6.0
samples = 3
samples_result = median
sample_retract_dist = 3.0
samples_tolerance = 0.025
samples_tolerance_retries = 3
z_offset = 1.360

[bed_mesh]
speed = 150
horizontal_move_z = 5
mesh_min = 10,21
mesh_max = 397,404
probe_count = 11,11
algorithm = bicubic
bicubic_tension = 0.2
mesh_pps = 4, 4
fade_start = 1.0
fade_end = 10.0

[output_pin Frame_Light]
pin = rpi:gpiochip2/gpio2

[output_pin Part_Light]
pin = rpi:gpiochip2/gpio15

[gcode_macro Frame_Light_ON]
gcode =
	SET_PIN PIN=Frame_Light VALUE=1

[gcode_macro Frame_Light_OFF]
gcode =
	SET_PIN PIN=Frame_Light VALUE=0

[gcode_macro Part_Light_ON]
gcode =
	SET_PIN PIN=Part_Light VALUE=1

[gcode_macro Part_Light_OFF]
gcode =
	SET_PIN PIN=Part_Light VALUE=0

[pwm_cycle_time beeper]
pin = PA2
value = 0
shutdown_value = 0
cycle_time = 0.0005

[gcode_macro M300]
gcode =
	{% set S = params.S|default(2000)|int %}
	{% set P = params.P|default(100)|int %}
	SET_PIN PIN=beeper VALUE=0.8 CYCLE_TIME={ 1.0/S if S > 0 else 1 }
	G4 P{P}
	SET_PIN PIN=beeper VALUE=0

[gcode_macro PAUSE_TUNE]
gcode =
	M300 S784 P300
	M300 S587 P600

[gcode_macro END_TUNE]
gcode =
	M300 S392 P250
	M300 S494 P250
	M300 S587 P250
	M300 S523 P300

[controller_fan heatbreak+mainboard_fan]
pin = PC7
fan_speed = 1.0
idle_speed = 0.5
idle_timeout = 43200
shutdown_speed = 1
heater = extruder, heater_bed
stepper = stepper_x, stepper_y, stepper_z, extruder

[fan]
pin = PB7

[fan_generic fan3]
pin = PC9

[fan_generic fan4]
pin = PA8

[fan_generic fan5]
pin = PA15

[delayed_gcode start_fan_at_idle_speed]
initial_duration = 5.
gcode =

	SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=1
	G4 P2000
	SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=0

[temperature_sensor RockchipHost]
sensor_type = temperature_host
min_temp = 10
max_temp = 80

[temperature_sensor STM32MCU]
sensor_type = temperature_mcu
min_temp = 10
max_temp = 85

[gcode_macro CG28]
gcode =
	{% if "xyz" not in printer.toolhead.homed_axes %}
	G28
	{% else %}
	{% endif %}

[safe_z_home]
home_xy_position = 239.75,194.55
speed = 100
z_hop = 10
z_hop_speed = 5

[axis_twist_compensation]
calibrate_start_x = 25
calibrate_end_x = 395
calibrate_y = 210

[gcode_macro Axis_Twist_Comp_Tune]
gcode =
	CG28
	AXIS_TWIST_COMPENSATION_CALIBRATE

[screws_tilt_adjust]
screw1 = 239.25,254.55
screw1_name = middle-rear bed mount (shim adjust)
screw2 = 239.25,134.55
screw2_name = middle-front bed mount (shim adjust)
screw3 = 56.75,377.05
screw3_name = rear left screw
screw4 = 56.75,194.55
screw4_name = center left screw
screw5 = 56.75,12.05
screw5_name = front left screw
screw6 = 421.75,12.05
screw6_name = front right screw
screw7 = 421.75,194.55
screw7_name = center right screw
screw8 = 421.75,377.05
screw8_name = rear right screw
horizontal_move_z = 5
speed = 150
screw_thread = CW-M4

[gcode_macro Bed_Level_Screws_Tune]
gcode =
	BED_MESH_CLEAR
	{% set current = printer.heater_bed.target|round(0) %}
	{% set target = current or 60 %}
	{% if current == 0 %}
	RESPOND PREFIX="Bed_Level_Screws_Tune" MSG="No bed target, heating to {target} °C"
	SET_BED_TEMPERATURE TARGET={target}
	{% else %}
	RESPOND PREFIX="Bed_Level_Screws_Tune" MSG="Waiting for bed to reach {target} °C"
	{% endif %}
	BED_TEMPERATURE_WAIT MINIMUM={target - 2} MAXIMUM={target + 5}
	CG28
	SCREWS_TILT_CALCULATE

[gcode_macro Calibrate_Probe_Z_Offset]
gcode =
	CG28
	PROBE_CALIBRATE

[gcode_macro Auto_Full_Bed_Level]
gcode =
	RESPOND PREFIX="info" MSG="Running Custom Bed Leveling Macro"
	BED_MESH_CLEAR
	SET_BED_TEMPERATURE TARGET=60
	BED_TEMPERATURE_WAIT MINIMUM=58 MAXIMUM=65
	CG28
	BED_MESH_CALIBRATE

[gcode_macro PID_Tune_EXTRUDER]
gcode =
	{% set temperature = params.TEMPERATURE|default(210) %}
	CG28
	M106 S255
	PID_CALIBRATE HEATER=extruder TARGET={temperature}
	SAVE_CONFIG

[gcode_macro PID_Tune_BED]
gcode =
	{% set temperature = params.TEMPERATURE|default(60) %}
	CG28
	M106 S255
	PID_CALIBRATE HEATER=heater_bed TARGET={temperature}
	SAVE_CONFIG

[mcu rpi]
serial = /tmp/klipper_host_mcu

[adxl345 x]
cs_pin = rpi:None
spi_bus = spidev0.0
axes_map = x,z,-y

[adxl345 y]
cs_pin = rpi:None
spi_bus = spidev0.1
axes_map = -x,-y,-z

[resonance_tester]
accel_chip_x = adxl345 x
accel_chip_y = adxl345 y
probe_points =
	215, 215, 20

[input_shaper]
shaper_type_x = 3hump_ei
shaper_freq_x = 95.800
damping_ratio_x = 0.100000
shaper_type_y = mzv
shaper_freq_y = 29.000
damping_ratio_y = 0.100000

[bed_mesh default]
version = 1
points =
	-0.002500, 0.030000, 0.040000, 0.020000
	-0.022500, -0.002500, 0.002500, -0.005000
	-0.040000, -0.012500, 0.000000, -0.015000
	-0.087500, -0.077500, -0.065000, -0.085000
x_count = 4
y_count = 4
mesh_x_pps = 4
mesh_y_pps = 4
algo = bicubic
tension = 0.2
min_x = 173.8
max_x = 246.19
min_y = 173.8
max_y = 246.19
=======================
Extruder max_extrude_ratio=2.078758
mcu 'mcu': Starting serial connect
webhooks client 281473004899856: New connection
webhooks client 281473004899856: Client info {'program': 'Moonraker', 'version': 'v0.10.0-19-g1ed102e'}
Loaded MCU 'mcu' 144 commands (v0.13.0-464-g48f0b3ca / gcc: (15:14.2.rel1-1) 14.2.1 20241119 binutils: (2.44-3+23+b2) 2.44)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1_PA6_PA7_PA5=PA6,PA7,PA5 BUS_PINS_spi1_PB4_PB5_PB3=PB4,PB5,PB3 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2_PB14_PB15_PB13=PB14,PB15,PB13 BUS_PINS_spi2_PC2_PC3_PB10=PC2,PC3,PB10 BUS_PINS_spi2_PI2_PI3_PI1=PI2,PI3,PI1 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3_PB4_PB5_PB3=PB4,PB5,PB3 BUS_PINS_spi3_PC11_PC12_PC10=PC11,PC12,PC10 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 BUS_PINS_spi4_PE13_PE14_PE12=PE13,PE14,PE12 CLOCK_FREQ=84000000 MCU=stm32f401xc PWM_MAX=32768 RECEIVE_WINDOW=192 RESERVE_PINS_crystal=PH0,PH1 RESERVE_PINS_serial=PA10,PA9 SERIAL_BAUD=250000 STATS_SUMSQ_BASE=256 STEPPER_OPTIMIZED_EDGE=11 STEPPER_STEP_BOTH_EDGE=1
mcu 'rpi': Starting connect
Loaded MCU 'rpi' 138 commands (v0.13.0-464-g48f0b3ca / gcc: (Debian 14.2.0-19) 14.2.0 binutils: (GNU Binutils for Debian) 2.44)
MCU 'rpi' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256 STEPPER_STEP_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-277.692308 slope=1326.315789
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'rpi' printer configuration...
Configured MCU 'rpi' (1024 moves)
Enabling TMC virtual enable for 'stepper_x'
Enabling TMC virtual enable for 'stepper_y'
Starting heater checks for extruder
Starting heater checks for heater_bed
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (34.2, 0.6)     | (10.0, 21.0)
  1   | (73.0, 0.6)     | (48.7, 21.0)
  2   | (111.7, 0.6)    | (87.4, 21.0)
  3   | (150.4, 0.6)    | (126.1, 21.0)
  4   | (189.1, 0.6)    | (164.8, 21.0)
  5   | (227.8, 0.6)    | (203.5, 21.0)
  6   | (266.5, 0.6)    | (242.2, 21.0)
  7   | (305.2, 0.6)    | (280.9, 21.0)
  8   | (343.9, 0.6)    | (319.6, 21.0)
  9   | (382.6, 0.6)    | (358.3, 21.0)
  10  | (421.2, 0.6)    | (397.0, 21.0)
  11  | (421.2, 38.8)   | (397.0, 59.3)
  12  | (382.6, 38.8)   | (358.3, 59.3)
  13  | (343.9, 38.8)   | (319.6, 59.3)
  14  | (305.1, 38.8)   | (280.9, 59.3)
  15  | (266.4, 38.8)   | (242.2, 59.3)
  16  | (227.8, 38.8)   | (203.5, 59.3)
  17  | (189.0, 38.8)   | (164.8, 59.3)
  18  | (150.3, 38.8)   | (126.1, 59.3)
  19  | (111.6, 38.8)   | (87.4, 59.3)
  20  | (72.9, 38.8)    | (48.7, 59.3)
  21  | (34.2, 38.8)    | (10.0, 59.3)
  22  | (34.2, 77.1)    | (10.0, 97.6)
  23  | (73.0, 77.1)    | (48.7, 97.6)
  24  | (111.7, 77.1)   | (87.4, 97.6)
  25  | (150.4, 77.1)   | (126.1, 97.6)
  26  | (189.1, 77.1)   | (164.8, 97.6)
  27  | (227.8, 77.1)   | (203.5, 97.6)
  28  | (266.5, 77.1)   | (242.2, 97.6)
  29  | (305.2, 77.1)   | (280.9, 97.6)
  30  | (343.9, 77.1)   | (319.6, 97.6)
  31  | (382.6, 77.1)   | (358.3, 97.6)
  32  | (421.2, 77.1)   | (397.0, 97.6)
  33  | (421.2, 115.4)  | (397.0, 135.9)
  34  | (382.6, 115.4)  | (358.3, 135.9)
  35  | (343.9, 115.4)  | (319.6, 135.9)
  36  | (305.1, 115.4)  | (280.9, 135.9)
  37  | (266.4, 115.4)  | (242.2, 135.9)
  38  | (227.8, 115.4)  | (203.5, 135.9)
  39  | (189.0, 115.4)  | (164.8, 135.9)
  40  | (150.3, 115.4)  | (126.1, 135.9)
  41  | (111.6, 115.4)  | (87.4, 135.9)
  42  | (72.9, 115.4)   | (48.7, 135.9)
  43  | (34.2, 115.4)   | (10.0, 135.9)
  44  | (34.2, 153.7)   | (10.0, 174.2)
  45  | (73.0, 153.7)   | (48.7, 174.2)
  46  | (111.7, 153.7)  | (87.4, 174.2)
  47  | (150.4, 153.7)  | (126.1, 174.2)
  48  | (189.1, 153.7)  | (164.8, 174.2)
  49  | (227.8, 153.7)  | (203.5, 174.2)
...points 50 through 120 truncated
Stats 57.4: gcodein=0 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2813 bytes_read=7172 bytes_retransmit=9 bytes_invalid=0 send_seq=225 receive_seq=225 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=84001291 rpi: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=990 bytes_read=5368 bytes_retransmit=0 bytes_invalid=0 send_seq=125 receive_seq=125 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49992655 adj=49993885 heater_bed: target=0 temp=0.0 pwm=0.000 RockchipHost: temp=35.9 STM32MCU: temp=0.0 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000 sysload=3.43 cputime=7.260 memavail=710448
webhooks: registering remote method 'shutdown_machine' for connection id: 281473004899856
webhooks: registering remote method 'reboot_machine' for connection id: 281473004899856
webhooks: registering remote method 'pause_job_queue' for connection id: 281473004899856
webhooks: registering remote method 'start_job_queue' for connection id: 281473004899856
Stats 58.4: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000020 mcu_task_stddev=0.000022 bytes_write=2827 bytes_read=7263 bytes_retransmit=9 bytes_invalid=0 send_seq=227 receive_seq=227 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=84003342 rpi: mcu_awake=0.005 mcu_task_avg=0.000033 mcu_task_stddev=0.000036 bytes_write=996 bytes_read=5399 bytes_retransmit=0 bytes_invalid=0 send_seq=126 receive_seq=126 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997914 adj=49991755 heater_bed: target=0 temp=41.2 pwm=0.000 RockchipHost: temp=32.3 STM32MCU: temp=22.7 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.5 pwm=0.000 sysload=3.43 cputime=7.292 memavail=712544
Stats 59.4: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000020 mcu_task_stddev=0.000022 bytes_write=2833 bytes_read=7411 bytes_retransmit=9 bytes_invalid=0 send_seq=228 receive_seq=228 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=84004526 rpi: mcu_awake=0.005 mcu_task_avg=0.000033 mcu_task_stddev=0.000036 bytes_write=1002 bytes_read=5415 bytes_retransmit=0 bytes_invalid=0 send_seq=127 receive_seq=127 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999138 adj=49997661 heater_bed: target=0 temp=41.2 pwm=0.000 RockchipHost: temp=34.5 STM32MCU: temp=22.7 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.2 pwm=0.000 sysload=3.43 cputime=7.317 memavail=714032
Stats 60.4: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000020 mcu_task_stddev=0.000022 bytes_write=2839 bytes_read=7574 bytes_retransmit=9 bytes_invalid=0 send_seq=229 receive_seq=229 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=84003825 rpi: mcu_awake=0.005 mcu_task_avg=0.000033 mcu_task_stddev=0.000036 bytes_write=1008 bytes_read=5431 bytes_retransmit=0 bytes_invalid=0 send_seq=128 receive_seq=128 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999354 adj=49998029 heater_bed: target=0 temp=41.2 pwm=0.000 RockchipHost: temp=35.0 STM32MCU: temp=22.5 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.1 pwm=0.000 sysload=3.23 cputime=7.336 memavail=714860
Stats 61.4: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000020 mcu_task_stddev=0.000022 bytes_write=2845 bytes_read=7751 bytes_retransmit=9 bytes_invalid=0 send_seq=230 receive_seq=230 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=84003463 rpi: mcu_awake=0.005 mcu_task_avg=0.000033 mcu_task_stddev=0.000036 bytes_write=1014 bytes_read=5447 bytes_retransmit=0 bytes_invalid=0 send_seq=129 receive_seq=129 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000144 adj=49998948 heater_bed: target=0 temp=41.2 pwm=0.000 RockchipHost: temp=34.5 STM32MCU: temp=22.8 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.8 pwm=0.000 sysload=3.23 cputime=7.352 memavail=716000
Stats 62.4: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000020 mcu_task_stddev=0.000022 bytes_write=2851 bytes_read=7899 bytes_retransmit=9 bytes_invalid=0 send_seq=231 receive_seq=231 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=84003172 rpi: mcu_awake=0.005 mcu_task_avg=0.000033 mcu_task_stddev=0.000036 bytes_write=1020 bytes_read=5463 bytes_retransmit=0 bytes_invalid=0 send_seq=130 receive_seq=130 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001466 adj=50000746 heater_bed: target=1 temp=41.2 pwm=0.000 RockchipHost: temp=33.2 STM32MCU: temp=22.8 print_time=11.510 buffer_time=2.183 print_stall=0 extruder: target=0 temp=78.6 pwm=0.000 sysload=3.23 cputime=7.368 memavail=717012
Stats 63.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=2872 bytes_read=8081 bytes_retransmit=9 bytes_invalid=0 send_seq=233 receive_seq=233 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=84003003 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=1026 bytes_read=5492 bytes_retransmit=0 bytes_invalid=0 send_seq=131 receive_seq=131 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002049 adj=50003781 heater_bed: target=1 temp=41.1 pwm=0.000 RockchipHost: temp=34.1 STM32MCU: temp=23.0 print_time=11.510 buffer_time=1.182 print_stall=0 extruder: target=0 temp=78.5 pwm=0.000 sysload=3.23 cputime=7.384 memavail=717800
Stats 64.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=2878 bytes_read=8258 bytes_retransmit=9 bytes_invalid=0 send_seq=234 receive_seq=234 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=84003200 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=1032 bytes_read=5508 bytes_retransmit=0 bytes_invalid=0 send_seq=132 receive_seq=132 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002733 adj=50004586 heater_bed: target=0 temp=41.1 pwm=0.000 RockchipHost: temp=32.7 STM32MCU: temp=22.8 print_time=11.510 buffer_time=0.182 print_stall=0 extruder: target=0 temp=78.2 pwm=0.000 sysload=3.23 cputime=7.400 memavail=718740
Stats 65.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=2899 bytes_read=8411 bytes_retransmit=9 bytes_invalid=0 send_seq=236 receive_seq=236 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=84002805 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=1038 bytes_read=5524 bytes_retransmit=0 bytes_invalid=0 send_seq=133 receive_seq=133 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50003167 adj=50005148 heater_bed: target=0 temp=41.1 pwm=0.000 RockchipHost: temp=33.2 STM32MCU: temp=22.9 print_time=11.510 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.0 pwm=0.000 sysload=2.97 cputime=7.416 memavail=719524
Stats 66.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=2905 bytes_read=8574 bytes_retransmit=9 bytes_invalid=0 send_seq=237 receive_seq=237 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=84002735 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=1044 bytes_read=5540 bytes_retransmit=0 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50003579 adj=50006204 heater_bed: target=0 temp=41.0 pwm=0.000 RockchipHost: temp=33.2 STM32MCU: temp=22.9 print_time=11.510 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.8 pwm=0.000 sysload=2.97 cputime=7.431 memavail=716600
Stats 67.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=2911 bytes_read=8751 bytes_retransmit=9 bytes_invalid=0 send_seq=238 receive_seq=238 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=84002666 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=1050 bytes_read=5556 bytes_retransmit=0 bytes_invalid=0 send_seq=135 receive_seq=135 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50003887 adj=50006565 heater_bed: target=0 temp=41.0 pwm=0.000 RockchipHost: temp=34.5 STM32MCU: temp=22.8 print_time=11.510 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.6 pwm=0.000 sysload=2.97 cputime=7.447 memavail=716976
Stats 68.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=2917 bytes_read=8913 bytes_retransmit=9 bytes_invalid=0 send_seq=239 receive_seq=239 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=84002618 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=1056 bytes_read=5585 bytes_retransmit=0 bytes_invalid=0 send_seq=136 receive_seq=136 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50004134 adj=50006673 heater_bed: target=0 temp=41.0 pwm=0.000 RockchipHost: temp=34.5 STM32MCU: temp=22.8 print_time=11.510 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.4 pwm=0.000 sysload=2.97 cputime=7.462 memavail=717748
Stats 69.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=2923 bytes_read=9076 bytes_retransmit=9 bytes_invalid=0 send_seq=240 receive_seq=240 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=84002567 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=1062 bytes_read=5601 bytes_retransmit=0 bytes_invalid=0 send_seq=137 receive_seq=137 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50004326 adj=50006634 heater_bed: target=0 temp=40.9 pwm=0.000 RockchipHost: temp=33.2 STM32MCU: temp=22.8 print_time=11.510 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.2 pwm=0.000 sysload=2.97 cputime=7.477 memavail=718648
Stats 70.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=2929 bytes_read=9253 bytes_retransmit=9 bytes_invalid=0 send_seq=241 receive_seq=241 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=84002532 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=1068 bytes_read=5617 bytes_retransmit=0 bytes_invalid=0 send_seq=138 receive_seq=138 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50004443 adj=50006523 heater_bed: target=0 temp=40.9 pwm=0.000 RockchipHost: temp=34.1 STM32MCU: temp=22.8 print_time=11.510 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.0 pwm=0.000 sysload=2.73 cputime=7.493 memavail=719216
Stats 71.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=2935 bytes_read=9401 bytes_retransmit=9 bytes_invalid=0 send_seq=242 receive_seq=242 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=84002531 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=1074 bytes_read=5633 bytes_retransmit=0 bytes_invalid=0 send_seq=139 receive_seq=139 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50004484 adj=50006180 heater_bed: target=0 temp=40.9 pwm=0.000 RockchipHost: temp=33.6 STM32MCU: temp=22.7 print_time=11.510 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.8 pwm=0.000 sysload=2.73 cputime=7.507 memavail=719928
Stats 72.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=2941 bytes_read=9564 bytes_retransmit=9 bytes_invalid=0 send_seq=243 receive_seq=243 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=84002489 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=1080 bytes_read=5649 bytes_retransmit=0 bytes_invalid=0 send_seq=140 receive_seq=140 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50004793 adj=50005552 heater_bed: target=0 temp=40.9 pwm=0.000 RockchipHost: temp=33.2 STM32MCU: temp=22.8 print_time=11.510 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.6 pwm=0.000 sysload=2.73 cputime=7.523 memavail=719748
Stats 73.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=2947 bytes_read=9755 bytes_retransmit=9 bytes_invalid=0 send_seq=244 receive_seq=244 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=84002467 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1086 bytes_read=5678 bytes_retransmit=0 bytes_invalid=0 send_seq=141 receive_seq=141 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50004825 adj=50006474 heater_bed: target=0 temp=40.8 pwm=0.000 RockchipHost: temp=33.6 STM32MCU: temp=22.9 print_time=11.510 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.4 pwm=0.000 sysload=2.73 cputime=7.539 memavail=720116
Stats 74.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=2953 bytes_read=9903 bytes_retransmit=9 bytes_invalid=0 send_seq=245 receive_seq=245 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=84002437 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1092 bytes_read=5694 bytes_retransmit=0 bytes_invalid=0 send_seq=142 receive_seq=142 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50004776 adj=50005906 heater_bed: target=0 temp=40.8 pwm=0.000 RockchipHost: temp=33.6 STM32MCU: temp=22.6 print_time=11.510 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.2 pwm=0.000 sysload=2.73 cputime=7.554 memavail=720540
Stats 75.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=2959 bytes_read=10066 bytes_retransmit=9 bytes_invalid=0 send_seq=246 receive_seq=246 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=84002410 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1098 bytes_read=5710 bytes_retransmit=0 bytes_invalid=0 send_seq=143 receive_seq=143 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50004788 adj=50005108 heater_bed: target=0 temp=40.8 pwm=0.000 RockchipHost: temp=32.7 STM32MCU: temp=22.7 print_time=11.510 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.0 pwm=0.000 sysload=2.52 cputime=7.569 memavail=720860
Stats 76.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=2965 bytes_read=10243 bytes_retransmit=9 bytes_invalid=0 send_seq=247 receive_seq=247 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=84002387 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1104 bytes_read=5726 bytes_retransmit=0 bytes_invalid=0 send_seq=144 receive_seq=144 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50004694 adj=50004812 heater_bed: target=0 temp=40.8 pwm=0.000 RockchipHost: temp=33.6 STM32MCU: temp=22.8 print_time=11.510 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.8 pwm=0.000 sysload=2.52 cputime=7.585 memavail=719900
Stats 77.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=2971 bytes_read=10391 bytes_retransmit=9 bytes_invalid=0 send_seq=248 receive_seq=248 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=84002368 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1110 bytes_read=5742 bytes_retransmit=0 bytes_invalid=0 send_seq=145 receive_seq=145 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50004659 adj=50004013 heater_bed: target=0 temp=40.8 pwm=0.000 RockchipHost: temp=32.7 STM32MCU: temp=22.8 print_time=11.510 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.6 pwm=0.000 sysload=2.52 cputime=7.600 memavail=720252
Stats 78.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=2977 bytes_read=10582 bytes_retransmit=9 bytes_invalid=0 send_seq=249 receive_seq=249 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=84002373 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=1116 bytes_read=5771 bytes_retransmit=0 bytes_invalid=0 send_seq=146 receive_seq=146 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50004600 adj=50003689 heater_bed: target=0 temp=40.7 pwm=0.000 RockchipHost: temp=32.7 STM32MCU: temp=22.7 print_time=11.510 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.4 pwm=0.000 sysload=2.52 cputime=7.615 memavail=720560
Stats 79.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=2983 bytes_read=10745 bytes_retransmit=9 bytes_invalid=0 send_seq=250 receive_seq=250 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=84002383 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=1128 bytes_read=5803 bytes_retransmit=0 bytes_invalid=0 send_seq=148 receive_seq=148 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50004509 adj=50003218 heater_bed: target=0 temp=40.7 pwm=0.000 RockchipHost: temp=32.3 STM32MCU: temp=22.7 print_time=11.510 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.2 pwm=0.000 sysload=2.52 cputime=7.631 memavail=720832
Stats 80.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=2989 bytes_read=10893 bytes_retransmit=9 bytes_invalid=0 send_seq=251 receive_seq=251 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=84002361 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=1134 bytes_read=5819 bytes_retransmit=0 bytes_invalid=0 send_seq=149 receive_seq=149 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50004437 adj=50002626 heater_bed: target=0 temp=40.7 pwm=0.000 RockchipHost: temp=31.8 STM32MCU: temp=22.6 print_time=11.510 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.0 pwm=0.000 sysload=2.31 cputime=7.646 memavail=721068
Stats 81.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=2995 bytes_read=11070 bytes_retransmit=9 bytes_invalid=0 send_seq=252 receive_seq=252 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=84002345 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=1140 bytes_read=5835 bytes_retransmit=0 bytes_invalid=0 send_seq=150 receive_seq=150 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50004385 adj=50002380 heater_bed: target=0 temp=40.7 pwm=0.000 RockchipHost: temp=33.6 STM32MCU: temp=22.7 print_time=11.510 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.8 pwm=0.000 sysload=2.31 cputime=7.662 memavail=721276
Stats 82.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=3001 bytes_read=11233 bytes_retransmit=9 bytes_invalid=0 send_seq=253 receive_seq=253 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=84002326 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=1146 bytes_read=5851 bytes_retransmit=0 bytes_invalid=0 send_seq=151 receive_seq=151 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50004318 adj=50002272 heater_bed: target=0 temp=40.6 pwm=0.000 RockchipHost: temp=34.5 STM32MCU: temp=22.8 print_time=11.510 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.6 pwm=0.000 sysload=2.31 cputime=7.677 memavail=716616
Stats 83.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=3007 bytes_read=11395 bytes_retransmit=9 bytes_invalid=0 send_seq=254 receive_seq=254 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=84002322 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=1152 bytes_read=5880 bytes_retransmit=0 bytes_invalid=0 send_seq=152 receive_seq=152 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50004235 adj=50002088 heater_bed: target=0 temp=40.6 pwm=0.000 RockchipHost: temp=35.0 STM32MCU: temp=22.6 print_time=11.510 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.4 pwm=0.000 sysload=2.31 cputime=7.694 memavail=689324
Starting SD card print (position 0)
Transition to shutdown state: MCU shutdown
Dumping gcode input 0 blocks
Dumping 20 requests for client 281473004899856
Received 57.709126: b'{"id":281473706543376,"method":"list_endpoints","params":{}}'
Received 57.712700: b'{"id":281473706543376,"method":"objects/subscribe","params":{"objects":{"webhooks":null,"print_stats":null,"gcode":null,"configfile":null,"mcu":null,"mcu rpi":null,"gcode_move":null,"virtual_sdcard":null,"pause_resume":null,"display_status":null,"gcode_macro CANCEL_PRINT":null,"gcode_macro PAUSE":null,"gcode_macro RESUME":null,"gcode_macro SET_PAUSE_NEXT_LAYER":null,"gcode_macro SET_PAUSE_AT_LAYER":null,"gcode_macro SET_PRINT_STATS_INFO":null,"gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL":null,"gcode_macro _CLIENT_EXTRUDE":null,"gcode_macro _CLIENT_RETRACT":null,"gcode_macro _CLIENT_LINEAR_MOVE":null,"gcode_macro _KAMP_Settings":null,"gcode_macro SMART_PARK":null,"gcode_macro LINE_PURGE":null,"exclude_object":null,"firmware_retraction":null,"idle_timeout":null,"gcode_macro PRINT_START":null,"gcode_macro PRINT_END":null,"filament_switch_sensor filament_sensor":null,"gcode_macro M600":null,"gcode_macro LOAD_FILAMENT":null,"gcode_macro UNLOAD_FILAMENT":null,"stepper_enable":null,"tmc2209 stepper_x":null,"tmc2209 stepper_y":null,"tmc2209 stepper_z":null,"tmc2209 extruder":null,"heaters":null,"heater_bed":null,"gcode_macro SET_BED_TEMPERATURE":null,"gcode_macro BED_TEMPERATURE_WAIT":null,"probe":null,"bed_mesh":null,"output_pin Frame_Light":null,"output_pin Part_Light":null,"gcode_macro Frame_Light_ON":null,"gcode_macro Frame_Light_OFF":null,"gcode_macro Part_Light_ON":null,"gcode_macro Part_Light_OFF":null,"pwm_cycle_time beeper":null,"gcode_macro M300":null,"gcode_macro PAUSE_TUNE":null,"gcode_macro END_TUNE":null,"controller_fan heatbreak+mainboard_fan":null,"fan":null,"fan_generic fan3":null,"fan_generic fan4":null,"fan_generic fan5":null,"temperature_host RockchipHost":null,"temperature_sensor RockchipHost":null,"temperature_sensor STM32MCU":null,"gcode_macro CG28":null,"gcode_macro Axis_Twist_Comp_Tune":null,"screws_tilt_adjust":null,"gcode_macro Bed_Level_Screws_Tune":null,"gcode_macro Calibrate_Probe_Z_Offset":null,"gcode_macro Auto_Full_Bed_Level":null,"gcode_macro PID_Tune_EXTRUDER":null,"gcode_macro PID_Tune_BED":null,"query_endstops":null,"motion_report":null,"toolhead":null,"extruder":null,"system_stats":null,"manual_probe":null,"heater_generic heater_bed_outer":["temperature","target"]},"response_template":{"method":"process_status_update"}}}'
Received 57.957628: b'{"id":281473706541360,"method":"objects/list","params":{}}'
Received 57.959675: b'{"id":281473706541360,"method":"objects/query","params":{"objects":{"configfile":null}}}'
Received 58.204035: b'{"id":281473706543936,"method":"register_remote_method","params":{"response_template":{"method":"shutdown_machine"},"remote_method":"shutdown_machine"}}'
Received 58.206487: b'{"id":281473706543936,"method":"register_remote_method","params":{"response_template":{"method":"reboot_machine"},"remote_method":"reboot_machine"}}'
Received 58.208375: b'{"id":281473706543936,"method":"register_remote_method","params":{"response_template":{"method":"pause_job_queue"},"remote_method":"pause_job_queue"}}'
Received 58.210239: b'{"id":281473706543936,"method":"register_remote_method","params":{"response_template":{"method":"start_job_queue"},"remote_method":"start_job_queue"}}'
Received 58.219906: b'{"id":281473706542592,"method":"objects/query","params":{"objects":{"heaters":null}}}'
Received 58.219906: b'{"id":281473706542144,"method":"objects/query","params":{"objects":{"heaters":null}}}'
Received 58.234564: b'{"id":281473706543936,"method":"objects/list","params":{}}'
Received 58.243823: b'{"id":281473706544832,"method":"objects/query","params":{"objects":{"gcode_move":null,"print_stats":null,"virtual_sdcard":null,"display_status":null,"filament_switch_sensor filament_sensor":null,"toolhead":null}}}'
Received 58.454538: b'{"id":281473706542592,"method":"objects/subscribe","params":{"objects":{"webhooks":null,"print_stats":null,"heater_bed":null,"temperature_sensor RockchipHost":null,"temperature_sensor STM32MCU":null,"extruder":null,"gcode":null,"configfile":null,"mcu":null,"mcu rpi":null,"gcode_move":null,"virtual_sdcard":null,"pause_resume":null,"display_status":null,"gcode_macro CANCEL_PRINT":null,"gcode_macro PAUSE":null,"gcode_macro RESUME":null,"gcode_macro SET_PAUSE_NEXT_LAYER":null,"gcode_macro SET_PAUSE_AT_LAYER":null,"gcode_macro SET_PRINT_STATS_INFO":null,"gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL":null,"gcode_macro _CLIENT_EXTRUDE":null,"gcode_macro _CLIENT_RETRACT":null,"gcode_macro _CLIENT_LINEAR_MOVE":null,"gcode_macro _KAMP_Settings":null,"gcode_macro SMART_PARK":null,"gcode_macro LINE_PURGE":null,"exclude_object":null,"firmware_retraction":null,"idle_timeout":null,"gcode_macro PRINT_START":null,"gcode_macro PRINT_END":null,"filament_switch_sensor filament_sensor":null,"gcode_macro M600":null,"gcode_macro LOAD_FILAMENT":null,"gcode_macro UNLOAD_FILAMENT":null,"stepper_enable":null,"tmc2209 stepper_x":null,"tmc2209 stepper_y":null,"tmc2209 stepper_z":null,"tmc2209 extruder":null,"heaters":null,"gcode_macro SET_BED_TEMPERATURE":null,"gcode_macro BED_TEMPERATURE_WAIT":null,"probe":null,"bed_mesh":null,"output_pin Frame_Light":null,"output_pin Part_Light":null,"gcode_macro Frame_Light_ON":null,"gcode_macro Frame_Light_OFF":null,"gcode_macro Part_Light_ON":null,"gcode_macro Part_Light_OFF":null,"pwm_cycle_time beeper":null,"gcode_macro M300":null,"gcode_macro PAUSE_TUNE":null,"gcode_macro END_TUNE":null,"controller_fan heatbreak+mainboard_fan":null,"fan":null,"fan_generic fan3":null,"fan_generic fan4":null,"fan_generic fan5":null,"temperature_host RockchipHost":null,"gcode_macro CG28":null,"gcode_macro Axis_Twist_Comp_Tune":null,"screws_tilt_adjust":null,"gcode_macro Bed_Level_Screws_Tune":null,"gcode_macro Calibrate_Probe_Z_Offset":null,"gcode_macro Auto_Full_Bed_Level":null,"gcode_macro PID_Tune_EXTRUDER":null,"gcode_macro PID_Tune_BED":null,"query_endstops":null,"motion_report":null,"toolhead":null,"system_stats":null,"manual_probe":null,"heater_generic heater_bed_outer":["temperature","target"]},"response_template":{"method":"process_status_update"}}}'
Received 58.709845: b'{"id":281473706541584,"method":"objects/subscribe","params":{"objects":{"webhooks":null,"print_stats":null,"heater_bed":null,"temperature_sensor RockchipHost":null,"temperature_sensor STM32MCU":null,"extruder":null,"gcode":null,"configfile":null,"mcu":null,"mcu rpi":null,"gcode_move":null,"virtual_sdcard":null,"pause_resume":null,"display_status":null,"gcode_macro CANCEL_PRINT":null,"gcode_macro PAUSE":null,"gcode_macro RESUME":null,"gcode_macro SET_PAUSE_NEXT_LAYER":null,"gcode_macro SET_PAUSE_AT_LAYER":null,"gcode_macro SET_PRINT_STATS_INFO":null,"gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL":null,"gcode_macro _CLIENT_EXTRUDE":null,"gcode_macro _CLIENT_RETRACT":null,"gcode_macro _CLIENT_LINEAR_MOVE":null,"gcode_macro _KAMP_Settings":null,"gcode_macro SMART_PARK":null,"gcode_macro LINE_PURGE":null,"exclude_object":null,"firmware_retraction":null,"idle_timeout":null,"gcode_macro PRINT_START":null,"gcode_macro PRINT_END":null,"filament_switch_sensor filament_sensor":null,"gcode_macro M600":null,"gcode_macro LOAD_FILAMENT":null,"gcode_macro UNLOAD_FILAMENT":null,"stepper_enable":null,"tmc2209 stepper_x":null,"tmc2209 stepper_y":null,"tmc2209 stepper_z":null,"tmc2209 extruder":null,"heaters":null,"gcode_macro SET_BED_TEMPERATURE":null,"gcode_macro BED_TEMPERATURE_WAIT":null,"probe":null,"bed_mesh":null,"output_pin Frame_Light":null,"output_pin Part_Light":null,"gcode_macro Frame_Light_ON":null,"gcode_macro Frame_Light_OFF":null,"gcode_macro Part_Light_ON":null,"gcode_macro Part_Light_OFF":null,"pwm_cycle_time beeper":null,"gcode_macro M300":null,"gcode_macro PAUSE_TUNE":null,"gcode_macro END_TUNE":null,"controller_fan heatbreak+mainboard_fan":null,"fan":null,"fan_generic fan3":null,"fan_generic fan4":null,"fan_generic fan5":null,"temperature_host RockchipHost":null,"gcode_macro CG28":null,"gcode_macro Axis_Twist_Comp_Tune":null,"screws_tilt_adjust":null,"gcode_macro Bed_Level_Screws_Tune":null,"gcode_macro Calibrate_Probe_Z_Offset":null,"gcode_macro Auto_Full_Bed_Level":null,"gcode_macro PID_Tune_EXTRUDER":null,"gcode_macro PID_Tune_BED":null,"query_endstops":null,"motion_report":null,"toolhead":null,"system_stats":null,"manual_probe":null,"heater_generic heater_bed_outer":["temperature","target"]},"response_template":{"method":"process_status_update"}}}'
Received 58.959774: b'{"id":281473706542816,"method":"objects/subscribe","params":{"objects":{"gcode_move":null,"print_stats":null,"virtual_sdcard":null,"display_status":null,"filament_switch_sensor filament_sensor":null,"toolhead":null,"gcode":null,"webhooks":null,"configfile":null,"mcu":null,"mcu rpi":null,"pause_resume":null,"gcode_macro CANCEL_PRINT":null,"gcode_macro PAUSE":null,"gcode_macro RESUME":null,"gcode_macro SET_PAUSE_NEXT_LAYER":null,"gcode_macro SET_PAUSE_AT_LAYER":null,"gcode_macro SET_PRINT_STATS_INFO":null,"gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL":null,"gcode_macro _CLIENT_EXTRUDE":null,"gcode_macro _CLIENT_RETRACT":null,"gcode_macro _CLIENT_LINEAR_MOVE":null,"gcode_macro _KAMP_Settings":null,"gcode_macro SMART_PARK":null,"gcode_macro LINE_PURGE":null,"exclude_object":null,"firmware_retraction":null,"idle_timeout":null,"gcode_macro PRINT_START":null,"gcode_macro PRINT_END":null,"gcode_macro M600":null,"gcode_macro LOAD_FILAMENT":null,"gcode_macro UNLOAD_FILAMENT":null,"stepper_enable":null,"tmc2209 stepper_x":null,"tmc2209 stepper_y":null,"tmc2209 stepper_z":null,"tmc2209 extruder":null,"heaters":null,"heater_bed":null,"gcode_macro SET_BED_TEMPERATURE":null,"gcode_macro BED_TEMPERATURE_WAIT":null,"probe":null,"bed_mesh":null,"output_pin Frame_Light":null,"output_pin Part_Light":null,"gcode_macro Frame_Light_ON":null,"gcode_macro Frame_Light_OFF":null,"gcode_macro Part_Light_ON":null,"gcode_macro Part_Light_OFF":null,"pwm_cycle_time beeper":null,"gcode_macro M300":null,"gcode_macro PAUSE_TUNE":null,"gcode_macro END_TUNE":null,"controller_fan heatbreak+mainboard_fan":null,"fan":null,"fan_generic fan3":null,"fan_generic fan4":null,"fan_generic fan5":null,"temperature_host RockchipHost":null,"temperature_sensor RockchipHost":null,"temperature_sensor STM32MCU":null,"gcode_macro CG28":null,"gcode_macro Axis_Twist_Comp_Tune":null,"screws_tilt_adjust":null,"gcode_macro Bed_Level_Screws_Tune":null,"gcode_macro Calibrate_Probe_Z_Offset":null,"gcode_macro Auto_Full_Bed_Level":null,"gcode_macro PID_Tune_EXTRUDER":null,"gcode_macro PID_Tune_BED":null,"query_endstops":null,"motion_report":null,"extruder":null,"system_stats":null,"manual_probe":null,"heater_generic heater_bed_outer":["temperature","target"]},"response_template":{"method":"process_status_update"}}}'
Received 59.673212: b'{"id":281473706543264,"method":"info","params":{}}'
Received 59.673212: b'{"id":281473706543376,"method":"objects/list","params":{}}'
Received 59.931198: b'{"id":281473742073632,"method":"objects/subscribe","params":{"objects":{"gcode":null,"webhooks":null,"configfile":null,"mcu":null,"mcu rpi":null,"gcode_move":null,"print_stats":null,"virtual_sdcard":null,"pause_resume":null,"display_status":null,"gcode_macro CANCEL_PRINT":null,"gcode_macro PAUSE":null,"gcode_macro RESUME":null,"gcode_macro SET_PAUSE_NEXT_LAYER":null,"gcode_macro SET_PAUSE_AT_LAYER":null,"gcode_macro SET_PRINT_STATS_INFO":null,"gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL":null,"gcode_macro _CLIENT_EXTRUDE":null,"gcode_macro _CLIENT_RETRACT":null,"gcode_macro _CLIENT_LINEAR_MOVE":null,"gcode_macro _KAMP_Settings":null,"gcode_macro SMART_PARK":null,"gcode_macro LINE_PURGE":null,"exclude_object":null,"firmware_retraction":null,"idle_timeout":null,"gcode_macro PRINT_START":null,"gcode_macro PRINT_END":null,"filament_switch_sensor filament_sensor":null,"gcode_macro M600":null,"gcode_macro LOAD_FILAMENT":null,"gcode_macro UNLOAD_FILAMENT":null,"stepper_enable":null,"tmc2209 stepper_x":null,"tmc2209 stepper_y":null,"tmc2209 stepper_z":null,"tmc2209 extruder":null,"heaters":null,"heater_bed":null,"gcode_macro SET_BED_TEMPERATURE":null,"gcode_macro BED_TEMPERATURE_WAIT":null,"probe":null,"bed_mesh":null,"output_pin Frame_Light":null,"output_pin Part_Light":null,"gcode_macro Frame_Light_ON":null,"gcode_macro Frame_Light_OFF":null,"gcode_macro Part_Light_ON":null,"gcode_macro Part_Light_OFF":null,"pwm_cycle_time beeper":null,"gcode_macro M300":null,"gcode_macro PAUSE_TUNE":null,"gcode_macro END_TUNE":null,"controller_fan heatbreak+mainboard_fan":null,"fan":null,"fan_generic fan3":null,"fan_generic fan4":null,"fan_generic fan5":null,"temperature_host RockchipHost":null,"temperature_sensor RockchipHost":null,"temperature_sensor STM32MCU":null,"gcode_macro CG28":null,"gcode_macro Axis_Twist_Comp_Tune":null,"screws_tilt_adjust":null,"gcode_macro Bed_Level_Screws_Tune":null,"gcode_macro Calibrate_Probe_Z_Offset":null,"gcode_macro Auto_Full_Bed_Level":null,"gcode_macro PID_Tune_EXTRUDER":null,"gcode_macro PID_Tune_BED":null,"query_endstops":null,"motion_report":null,"toolhead":null,"extruder":null,"system_stats":null,"manual_probe":null,"heater_generic heater_bed_outer":["temperature","target"]},"response_template":{"method":"process_status_update"}}}'
Received 60.034876: b'{"id":281473706546736,"method":"gcode/help","params":{}}'
Received 83.868271: b'{"id":281473706542704,"method":"gcode/script","params":{"script":"SDCARD_PRINT_FILE FILENAME=\\"Blank Deck_0.2mm_PETG_Elegoo Neptune 4 Max_1h5m.gcode\\""}}'
MCU 'mcu' shutdown: Timer too close
clocksync state: mcu_freq=84000000 last_clock=2575546947 clock_est=(66.137 1093657928 84002344.029) min_half_rtt=0.000267 min_rtt_time=57.194 time_avg=66.137(103.901) clock_avg=1093657928.789(8727916159.914) pred_variance=2020569137.914
Dumping serial stats: bytes_write=3040 bytes_read=11555 bytes_retransmit=9 bytes_invalid=0 send_seq=256 receive_seq=256 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 100 messages
Sent 0 56.987920 56.987160 19: seq: 1c, tmcuart_send oid=1 write=b'\xea\x03h0\x80\x00\x12\x08 \xda' read=0
Sent 1 56.992280 56.991720 14: seq: 1d, tmcuart_send oid=1 write=b'\xea\x03H \xe4' read=10
Sent 2 56.999141 56.998381 19: seq: 1e, tmcuart_send oid=1 write=b'\xea\x03\x88=\x9a\x02\x02\x08*\xdb' read=0
Sent 3 57.003556 57.002996 14: seq: 1f, tmcuart_send oid=1 write=b'\xea\x03H \xe4' read=10
Sent 4 57.010411 57.009651 19: seq: 10, tmcuart_send oid=1 write=b'\xea\x03\x082\x80\x10\x9ah"\x9c' read=0
Sent 5 57.014850 57.014290 14: seq: 11, tmcuart_send oid=1 write=b'\xea\x03H \xe4' read=10
Sent 6 57.021813 57.021053 19: seq: 12, tmcuart_send oid=1 write=b'\xea\x03h2\x80\x00\x02\x08 \xfb' read=0
Sent 7 57.026235 57.025675 14: seq: 13, tmcuart_send oid=1 write=b'\xea\x03H \xe4' read=10
Sent 8 57.033119 57.032359 19: seq: 14, tmcuart_send oid=1 write=b'\xea\x03\x882\x80\x00\x02\x08\xa0\xe6' read=0
Sent 9 57.037552 57.036992 14: seq: 15, tmcuart_send oid=1 write=b'\xea\x03H \xe4' read=10
Sent 10 57.044372 57.043612 19: seq: 16, tmcuart_send oid=1 write=b'\xea\x03H8\x80\x00\x02\x08 \xde' read=0
Sent 11 57.048793 57.048233 14: seq: 17, tmcuart_send oid=1 write=b'\xea\x03H \xe4' read=10
Sent 12 57.055608 57.054848 19: seq: 18, tmcuart_send oid=1 write=b'\xea\x03\x08>\xe4\x1ar\x88\xa4\x85' read=0
Sent 13 57.060037 57.059477 14: seq: 19, tmcuart_send oid=1 write=b'\xea\x03H \xe4' read=10
Sent 14 57.066909 57.066149 19: seq: 1a, tmcuart_send oid=1 write=b'\xea\x03(2\x80\x00\x02\x88"\xf3' read=0
Sent 15 57.071267 57.070707 14: seq: 1b, tmcuart_send oid=1 write=b'\xea\x03H \xe4' read=10
Sent 16 57.078045 57.077285 19: seq: 1c, tmcuart_send oid=1 write=b'\xea\x03\x088\x80\x00\x02\x08*\xa1' read=0
Sent 17 57.082471 57.081911 14: seq: 1d, tmcuart_send oid=1 write=b'\xea\x03H \xe4' read=10
Sent 18 57.089107 57.088547 14: seq: 1e, tmcuart_send oid=2 write=b'\xea\x03H \xe4' read=10
Sent 19 57.096029 57.095269 19: seq: 1f, tmcuart_send oid=2 write=b'\xea\x03\x080\x80\x00\n\x88\xb8\xf7' read=0
Sent 20 57.100501 57.099941 14: seq: 10, tmcuart_send oid=2 write=b'\xea\x03H \xe4' read=10
Sent 21 57.107368 57.106608 19: seq: 11, tmcuart_send oid=2 write=b'\xea\x03h0\x80\x00\x12\x08 \xda' read=0
Sent 22 57.111740 57.111180 14: seq: 12, tmcuart_send oid=2 write=b'\xea\x03H \xe4' read=10
Sent 23 57.118640 57.117880 19: seq: 13, tmcuart_send oid=2 write=b'\xea\x03\x88=\x9a\x06\x02h*\xbf' read=0
Sent 24 57.123073 57.122513 14: seq: 14, tmcuart_send oid=2 write=b'\xea\x03H \xe4' read=10
Sent 25 57.129951 57.129191 19: seq: 15, tmcuart_send oid=2 write=b'\xea\x03\x082\x80\x10\xca(\xa3\xc1' read=0
Sent 26 57.134356 57.133796 14: seq: 16, tmcuart_send oid=2 write=b'\xea\x03H \xe4' read=10
Sent 27 57.141221 57.140461 19: seq: 17, tmcuart_send oid=2 write=b'\xea\x03h2\x80\x1e\xfa\xef?\xdf' read=0
Sent 28 57.145806 57.145246 14: seq: 18, tmcuart_send oid=2 write=b'\xea\x03H \xe4' read=10
Sent 29 57.152703 57.151943 19: seq: 19, tmcuart_send oid=2 write=b'\xea\x03\x882\x80\x00\x02\x08\xa0\xe6' read=0
Sent 30 57.157253 57.156693 14: seq: 1a, tmcuart_send oid=2 write=b'\xea\x03H \xe4' read=10
Sent 31 57.164111 57.163351 19: seq: 1b, tmcuart_send oid=2 write=b'\xea\x03H8\x80\x00\x02\x08 \xde' read=0
Sent 32 57.168558 57.167998 14: seq: 1c, tmcuart_send oid=2 write=b'\xea\x03H \xe4' read=10
Sent 33 57.175458 57.174698 19: seq: 1d, tmcuart_send oid=2 write=b'\xea\x03\x08>\xe4\x1ar\x88\xa4\x85' read=0
Sent 34 57.179828 57.179268 14: seq: 1e, tmcuart_send oid=2 write=b'\xea\x03H \xe4' read=10
Sent 35 57.186668 57.185908 19: seq: 1f, tmcuart_send oid=2 write=b'\xea\x03(2\x80\x00\x02\x88"\xf3' read=0
Sent 36 57.191123 57.190563 14: seq: 10, tmcuart_send oid=2 write=b'\xea\x03H \xe4' read=10
Sent 37 57.193692 57.193452 6: seq: 11, get_clock
Sent 38 57.197973 57.197213 19: seq: 12, tmcuart_send oid=2 write=b'\xea\x03\x088\x80\x00\x02\x08 \xba' read=0
Sent 39 57.202337 57.201777 14: seq: 13, tmcuart_send oid=2 write=b'\xea\x03H \xe4' read=10
Sent 40 57.208964 57.208404 14: seq: 14, tmcuart_send oid=3 write=b'\xea\x03H \xe4' read=10
Sent 41 57.215819 57.215059 19: seq: 15, tmcuart_send oid=3 write=b'\xea\x03\x080\x80\x00\n\x88\xb8\xf7' read=0
Sent 42 57.220186 57.219626 14: seq: 16, tmcuart_send oid=3 write=b'\xea\x03H \xe4' read=10
Sent 43 57.226991 57.226231 19: seq: 17, tmcuart_send oid=3 write=b'\xea\x03h0\x80\x00\x12\x08 \xda' read=0
Sent 44 57.231512 57.230952 14: seq: 18, tmcuart_send oid=3 write=b'\xea\x03H \xe4' read=10
Sent 45 57.238355 57.237595 19: seq: 19, tmcuart_send oid=3 write=b'\xea\x03\x88=\x82\x06\x02h*\xcb' read=0
Sent 46 57.242792 57.242232 14: seq: 1a, tmcuart_send oid=3 write=b'\xea\x03H \xe4' read=10
Sent 47 57.249661 57.248901 19: seq: 1b, tmcuart_send oid=3 write=b'\xea\x03\x082\x80\x10\xca(\xa3\xc1' read=0
Sent 48 57.254135 57.253575 14: seq: 1c, tmcuart_send oid=3 write=b'\xea\x03H \xe4' read=10
Sent 49 57.260941 57.260181 19: seq: 1d, tmcuart_send oid=3 write=b'\xea\x03h2\x80\x1e\xfa\xef?\xdf' read=0
Sent 50 57.265448 57.264888 14: seq: 1e, tmcuart_send oid=3 write=b'\xea\x03H \xe4' read=10
Sent 51 57.272284 57.271524 19: seq: 1f, tmcuart_send oid=3 write=b'\xea\x03\x882\x80\x00\x02\x08\xa0\xe6' read=0
Sent 52 57.276709 57.276149 14: seq: 10, tmcuart_send oid=3 write=b'\xea\x03H \xe4' read=10
Sent 53 57.283559 57.282799 19: seq: 11, tmcuart_send oid=3 write=b'\xea\x03H8\x80\x00\x02\x08 \xde' read=0
Sent 54 57.287896 57.287336 14: seq: 12, tmcuart_send oid=3 write=b'\xea\x03H \xe4' read=10
Sent 55 57.294722 57.293962 19: seq: 13, tmcuart_send oid=3 write=b'\xea\x03\x08>\xe4\x1ar\x88\xa4\x85' read=0
Sent 56 57.299161 57.298601 14: seq: 14, tmcuart_send oid=3 write=b'\xea\x03H \xe4' read=10
Sent 57 57.306016 57.305256 19: seq: 15, tmcuart_send oid=3 write=b'\xea\x03(2\x80\x00\x02\x88"\xf3' read=0
Sent 58 57.310480 57.309920 14: seq: 16, tmcuart_send oid=3 write=b'\xea\x03H \xe4' read=10
Sent 59 57.317437 57.316677 19: seq: 17, tmcuart_send oid=3 write=b'\xea\x03\x088\x80\x00\x02\x08 \xba' read=0
Sent 60 57.321946 57.321386 14: seq: 18, tmcuart_send oid=3 write=b'\xea\x03H \xe4' read=10
Sent 61 57.340808 57.340528 7: seq: 19, stepper_get_position oid=8
Sent 62 57.343175 57.342615 14: seq: 1a, tmcuart_send oid=0 write=b'\xea\x03H-\xd5' read=10
Sent 63 57.349834 57.349554 7: seq: 1b, stepper_get_position oid=11
Sent 64 57.352241 57.351681 14: seq: 1c, tmcuart_send oid=1 write=b'\xea\x03H-\xd5' read=10
Sent 65 57.358536 57.358256 7: seq: 1d, stepper_get_position oid=12
Sent 66 57.361045 57.360485 14: seq: 1e, tmcuart_send oid=2 write=b'\xea\x03H-\xd5' read=10
Sent 67 57.367286 57.367006 7: seq: 1f, stepper_get_position oid=13
Sent 68 57.369712 57.369152 14: seq: 10, tmcuart_send oid=3 write=b'\xea\x03H-\xd5' read=10
Sent 69 58.178645 58.178405 6: seq: 11, get_clock
Sent 70 58.261235 58.260915 8: seq: 12, buttons_ack oid=14 count=1
Sent 71 59.162928 59.162688 6: seq: 13, get_clock
Sent 72 60.147035 60.146795 6: seq: 14, get_clock
Sent 73 61.131439 61.131199 6: seq: 15, get_clock
Sent 74 62.116154 62.115914 6: seq: 16, get_clock
Sent 75 62.483695 62.483095 15: seq: 17, queue_digital_out oid=18 clock=794823215 on_ticks=840000
Sent 76 63.100936 63.100696 6: seq: 18, get_clock
Sent 77 64.085936 64.085696 6: seq: 19, get_clock
Sent 78 64.484690 64.484090 15: seq: 1a, queue_digital_out oid=18 clock=962913182 on_ticks=420000
Sent 79 65.070700 65.070460 6: seq: 1b, get_clock
Sent 80 66.055593 66.055353 6: seq: 1c, get_clock
Sent 81 67.040017 67.039777 6: seq: 1d, get_clock
Sent 82 68.024681 68.024441 6: seq: 1e, get_clock
Sent 83 69.009133 69.008893 6: seq: 1f, get_clock
Sent 84 69.993771 69.993531 6: seq: 10, get_clock
Sent 85 70.978442 70.978202 6: seq: 11, get_clock
Sent 86 71.963195 71.962955 6: seq: 12, get_clock
Sent 87 72.947943 72.947703 6: seq: 13, get_clock
Sent 88 73.932496 73.932256 6: seq: 14, get_clock
Sent 89 74.916602 74.916362 6: seq: 15, get_clock
Sent 90 75.901449 75.901209 6: seq: 16, get_clock
Sent 91 76.885887 76.885647 6: seq: 17, get_clock
Sent 92 77.870304 77.870064 6: seq: 18, get_clock
Sent 93 78.854776 78.854536 6: seq: 19, get_clock
Sent 94 79.839404 79.839164 6: seq: 1a, get_clock
Sent 95 80.824211 80.823971 6: seq: 1b, get_clock
Sent 96 81.809144 81.808904 6: seq: 1c, get_clock
Sent 97 82.793638 82.793398 6: seq: 1d, get_clock
Sent 98 83.778065 83.777825 6: seq: 1e, get_clock
Sent 99 84.286804 84.285724 27: seq: 1f, queue_digital_out oid=27 clock=2609712000 on_ticks=8400000, queue_digital_out oid=16 clock=2625672000 on_ticks=25200000
Dumping receive queue 100 messages
Receive: 0 75.486864 74.916602 15: seq: 16, analog_in_state oid=26 next_clock=1903440000 value=24266
Receive: 1 75.674753 74.916602 15: seq: 16, analog_in_state oid=15 next_clock=1919400000 value=29948
Receive: 2 75.754798 74.916602 14: seq: 16, analog_in_state oid=23 next_clock=1926120000 value=7424
Receive: 3 75.784756 74.916602 15: seq: 16, analog_in_state oid=26 next_clock=1928640000 value=24281
Receive: 4 75.902187 75.901449 11: seq: 17, clock clock=1913888097
Receive: 5 75.974821 75.901449 15: seq: 17, analog_in_state oid=15 next_clock=1944600000 value=29948
Receive: 6 76.054742 75.901449 14: seq: 17, analog_in_state oid=23 next_clock=1951320000 value=7420
Receive: 7 76.084874 75.901449 15: seq: 17, analog_in_state oid=26 next_clock=1953840000 value=24296
Receive: 8 76.274792 75.901449 15: seq: 17, analog_in_state oid=15 next_clock=1969800000 value=29946
Receive: 9 76.354850 75.901449 14: seq: 17, analog_in_state oid=23 next_clock=1976520000 value=7421
Receive: 10 76.384833 75.901449 15: seq: 17, analog_in_state oid=26 next_clock=1979040000 value=24305
Receive: 11 76.574751 75.901449 15: seq: 17, analog_in_state oid=15 next_clock=1995000000 value=29948
Receive: 12 76.654739 75.901449 14: seq: 17, analog_in_state oid=23 next_clock=2001720000 value=7419
Receive: 13 76.684764 75.901449 15: seq: 17, analog_in_state oid=26 next_clock=2004240000 value=24318
Receive: 14 76.874695 75.901449 15: seq: 17, analog_in_state oid=15 next_clock=2020200000 value=29951
Receive: 15 76.886573 76.885887 11: seq: 18, clock clock=1996583217
Receive: 16 76.954765 76.885887 14: seq: 18, analog_in_state oid=23 next_clock=2026920000 value=7421
Receive: 17 76.984728 76.885887 15: seq: 18, analog_in_state oid=26 next_clock=2029440000 value=24331
Receive: 18 77.174797 76.885887 15: seq: 18, analog_in_state oid=15 next_clock=2045400000 value=29949
Receive: 19 77.254715 76.885887 14: seq: 18, analog_in_state oid=23 next_clock=2052120000 value=7422
Receive: 20 77.284763 76.885887 15: seq: 18, analog_in_state oid=26 next_clock=2054640000 value=24343
Receive: 21 77.474805 76.885887 15: seq: 18, analog_in_state oid=15 next_clock=2070600000 value=29951
Receive: 22 77.554752 76.885887 14: seq: 18, analog_in_state oid=23 next_clock=2077320000 value=7417
Receive: 23 77.584699 76.885887 15: seq: 18, analog_in_state oid=26 next_clock=2079840000 value=24357
Receive: 24 77.774787 76.885887 15: seq: 18, analog_in_state oid=15 next_clock=2095800000 value=29955
Receive: 25 77.854764 76.885887 14: seq: 18, analog_in_state oid=23 next_clock=2102520000 value=7419
Receive: 26 77.871012 77.870304 11: seq: 19, clock clock=2079278869
Receive: 27 77.884821 77.870304 15: seq: 19, analog_in_state oid=26 next_clock=2105040000 value=24371
Receive: 28 78.074841 77.870304 15: seq: 19, analog_in_state oid=15 next_clock=2121000000 value=29953
Receive: 29 78.154787 77.870304 14: seq: 19, analog_in_state oid=23 next_clock=2127720000 value=7421
Receive: 30 78.184755 77.870304 15: seq: 19, analog_in_state oid=26 next_clock=2130240000 value=24383
Receive: 31 78.217577 77.870304 14: seq: 19, stats count=106 sum=100378 sumsq=540910
Receive: 32 78.374768 77.870304 15: seq: 19, analog_in_state oid=15 next_clock=2146200000 value=29957
Receive: 33 78.454715 77.870304 14: seq: 19, analog_in_state oid=23 next_clock=2152920000 value=7419
Receive: 34 78.484668 77.870304 15: seq: 19, analog_in_state oid=26 next_clock=2155440000 value=24397
Receive: 35 78.674741 77.870304 15: seq: 19, analog_in_state oid=15 next_clock=2171400000 value=29956
Receive: 36 78.754678 77.870304 14: seq: 19, analog_in_state oid=23 next_clock=2178120000 value=7419
Receive: 37 78.784785 77.870304 15: seq: 19, analog_in_state oid=26 next_clock=2180640000 value=24409
Receive: 38 78.855513 78.854776 11: seq: 1a, clock clock=2161977615
Receive: 39 78.974735 78.854776 15: seq: 1a, analog_in_state oid=15 next_clock=2196600000 value=29956
Receive: 40 79.054764 78.854776 14: seq: 1a, analog_in_state oid=23 next_clock=2203320000 value=7420
Receive: 41 79.084727 78.854776 15: seq: 1a, analog_in_state oid=26 next_clock=2205840000 value=24421
Receive: 42 79.274749 78.854776 15: seq: 1a, analog_in_state oid=15 next_clock=2221800000 value=29959
Receive: 43 79.354732 78.854776 14: seq: 1a, analog_in_state oid=23 next_clock=2228520000 value=7419
Receive: 44 79.384854 78.854776 15: seq: 1a, analog_in_state oid=26 next_clock=2231040000 value=24433
Receive: 45 79.574641 78.854776 15: seq: 1a, analog_in_state oid=15 next_clock=2247000000 value=29959
Receive: 46 79.654738 78.854776 14: seq: 1a, analog_in_state oid=23 next_clock=2253720000 value=7418
Receive: 47 79.684725 78.854776 15: seq: 1a, analog_in_state oid=26 next_clock=2256240000 value=24445
Receive: 48 79.840134 79.839404 11: seq: 1b, clock clock=2244684649
Receive: 49 79.874715 79.839404 15: seq: 1b, analog_in_state oid=15 next_clock=2272200000 value=29961
Receive: 50 79.954711 79.839404 14: seq: 1b, analog_in_state oid=23 next_clock=2278920000 value=7423
Receive: 51 79.984726 79.839404 15: seq: 1b, analog_in_state oid=26 next_clock=2281440000 value=24459
Receive: 52 80.174716 79.839404 15: seq: 1b, analog_in_state oid=15 next_clock=2297400000 value=29961
Receive: 53 80.254646 79.839404 14: seq: 1b, analog_in_state oid=23 next_clock=2304120000 value=7418
Receive: 54 80.284653 79.839404 15: seq: 1b, analog_in_state oid=26 next_clock=2306640000 value=24469
Receive: 55 80.474671 79.839404 15: seq: 1b, analog_in_state oid=15 next_clock=2322600000 value=29962
Receive: 56 80.554676 79.839404 14: seq: 1b, analog_in_state oid=23 next_clock=2329320000 value=7414
Receive: 57 80.584652 79.839404 15: seq: 1b, analog_in_state oid=26 next_clock=2331840000 value=24486
Receive: 58 80.774685 79.839404 15: seq: 1b, analog_in_state oid=15 next_clock=2347800000 value=29963
Receive: 59 80.824977 80.824211 11: seq: 1c, clock clock=2327411032
Receive: 60 80.854734 80.824211 14: seq: 1c, analog_in_state oid=23 next_clock=2354520000 value=7421
Receive: 61 80.884725 80.824211 15: seq: 1c, analog_in_state oid=26 next_clock=2357040000 value=24496
Receive: 62 81.074680 80.824211 15: seq: 1c, analog_in_state oid=15 next_clock=2373000000 value=29963
Receive: 63 81.154672 80.824211 14: seq: 1c, analog_in_state oid=23 next_clock=2379720000 value=7419
Receive: 64 81.184675 80.824211 15: seq: 1c, analog_in_state oid=26 next_clock=2382240000 value=24505
Receive: 65 81.374704 80.824211 15: seq: 1c, analog_in_state oid=15 next_clock=2398200000 value=29963
Receive: 66 81.454624 80.824211 14: seq: 1c, analog_in_state oid=23 next_clock=2404920000 value=7420
Receive: 67 81.484672 80.824211 15: seq: 1c, analog_in_state oid=26 next_clock=2407440000 value=24519
Receive: 68 81.674656 80.824211 15: seq: 1c, analog_in_state oid=15 next_clock=2423400000 value=29962
Receive: 69 81.754654 80.824211 14: seq: 1c, analog_in_state oid=23 next_clock=2430120000 value=7423
Receive: 70 81.784607 80.824211 15: seq: 1c, analog_in_state oid=26 next_clock=2432640000 value=24533
Receive: 71 81.809880 81.809144 11: seq: 1d, clock clock=2410146675
Receive: 72 81.974647 81.809144 15: seq: 1d, analog_in_state oid=15 next_clock=2448600000 value=29963
Receive: 73 82.054643 81.809144 14: seq: 1d, analog_in_state oid=23 next_clock=2455320000 value=7421
Receive: 74 82.084673 81.809144 15: seq: 1d, analog_in_state oid=26 next_clock=2457840000 value=24547
Receive: 75 82.274707 81.809144 15: seq: 1d, analog_in_state oid=15 next_clock=2473800000 value=29967
Receive: 76 82.354700 81.809144 14: seq: 1d, analog_in_state oid=23 next_clock=2480520000 value=7421
Receive: 77 82.384799 81.809144 15: seq: 1d, analog_in_state oid=26 next_clock=2483040000 value=24558
Receive: 78 82.574669 81.809144 15: seq: 1d, analog_in_state oid=15 next_clock=2499000000 value=29968
Receive: 79 82.654653 81.809144 14: seq: 1d, analog_in_state oid=23 next_clock=2505720000 value=7421
Receive: 80 82.684658 81.809144 15: seq: 1d, analog_in_state oid=26 next_clock=2508240000 value=24569
Receive: 81 82.794382 82.793638 11: seq: 1e, clock clock=2492848343
Receive: 82 82.874713 82.793638 15: seq: 1e, analog_in_state oid=15 next_clock=2524200000 value=29966
Receive: 83 82.954651 82.793638 14: seq: 1e, analog_in_state oid=23 next_clock=2530920000 value=7423
Receive: 84 82.984642 82.793638 15: seq: 1e, analog_in_state oid=26 next_clock=2533440000 value=24589
Receive: 85 83.174600 82.793638 15: seq: 1e, analog_in_state oid=15 next_clock=2549400000 value=29972
Receive: 86 83.217429 82.793638 14: seq: 1e, stats count=105 sum=97565 sumsq=515868
Receive: 87 83.254608 82.793638 14: seq: 1e, analog_in_state oid=23 next_clock=2556120000 value=7418
Receive: 88 83.284738 82.793638 15: seq: 1e, analog_in_state oid=26 next_clock=2558640000 value=24599
Receive: 89 83.474645 82.793638 15: seq: 1e, analog_in_state oid=15 next_clock=2574600000 value=29969
Receive: 90 83.554683 82.793638 14: seq: 1e, analog_in_state oid=23 next_clock=2581320000 value=7417
Receive: 91 83.584592 82.793638 15: seq: 1e, analog_in_state oid=26 next_clock=2583840000 value=24614
Receive: 92 83.774635 82.793638 15: seq: 1e, analog_in_state oid=15 next_clock=2599800000 value=29971
Receive: 93 83.778893 83.778065 11: seq: 1f, clock clock=2575546947
Receive: 94 83.854581 83.778065 14: seq: 1f, analog_in_state oid=23 next_clock=2606520000 value=7421
Receive: 95 84.284367 83.778065 15: seq: 1f, analog_in_state oid=26 next_clock=2609040000 value=24624
Receive: 96 84.284382 83.778065 15: seq: 1f, analog_in_state oid=15 next_clock=2625000000 value=29973
Receive: 97 84.284423 83.778065 14: seq: 1f, analog_in_state oid=23 next_clock=2631720000 value=7421
Receive: 98 84.284384 83.778065 15: seq: 1f, analog_in_state oid=26 next_clock=2634240000 value=24638
Receive: 99 84.287674 84.286804 12: seq: 10, shutdown clock=2618279007 static_string_id=Timer too close
MCU 'mcu' shutdown: Timer too close
This often indicates the host computer is overloaded. Check
for other processes consuming excessive CPU time, high swap
usage, disk errors, overheating, unstable voltage, or
similar system problems on the host computer.
Once the underlying issue is corrected, use the
"FIRMWARE_RESTART" command to reset the firmware, reload the
config, and restart the host software.
Printer is shutdown

Reactor garbage collection: (84.281708289, 0.0, 0.0)
MCU 'rpi' shutdown:
clocksync state: mcu_freq=50000000 last_clock=5814648519 clock_est=(66.132 4951602207 50004235.053) min_half_rtt=0.000084 min_rtt_time=56.808 time_avg=66.132(96.278) clock_avg=4951602207.501(4814292903.067) pred_variance=788308701.603 clock_adj=(-86.015 50001757.250)
Dumping serial stats: bytes_write=1152 bytes_read=5880 bytes_retransmit=0 bytes_invalid=0 send_seq=152 receive_seq=152 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=1
Dumping send queue 100 messages
Sent 0 56.249257 56.249257 9: seq: 14, identify offset=1440 count=40
Sent 1 56.250411 56.250411 9: seq: 15, identify offset=1480 count=40
Sent 2 56.251437 56.251437 9: seq: 16, identify offset=1520 count=40
Sent 3 56.252583 56.252583 9: seq: 17, identify offset=1560 count=40
Sent 4 56.253722 56.253722 9: seq: 18, identify offset=1600 count=40
Sent 5 56.254829 56.254829 9: seq: 19, identify offset=1640 count=40
Sent 6 56.255937 56.255937 9: seq: 1a, identify offset=1680 count=40
Sent 7 56.257064 56.257064 9: seq: 1b, identify offset=1720 count=40
Sent 8 56.258142 56.258142 9: seq: 1c, identify offset=1760 count=40
Sent 9 56.259214 56.259214 9: seq: 1d, identify offset=1800 count=40
Sent 10 56.260413 56.260413 9: seq: 1e, identify offset=1840 count=40
Sent 11 56.261539 56.261539 9: seq: 1f, identify offset=1880 count=40
Sent 12 56.262590 56.262590 9: seq: 10, identify offset=1920 count=40
Sent 13 56.263544 56.263544 9: seq: 11, identify offset=1960 count=40
Sent 14 56.264673 56.264673 9: seq: 12, identify offset=2000 count=40
Sent 15 56.265812 56.265812 9: seq: 13, identify offset=2040 count=40
Sent 16 56.266944 56.266944 9: seq: 14, identify offset=2080 count=40
Sent 17 56.268065 56.268065 9: seq: 15, identify offset=2120 count=40
Sent 18 56.269214 56.269214 9: seq: 16, identify offset=2160 count=40
Sent 19 56.270328 56.270328 9: seq: 17, identify offset=2200 count=40
Sent 20 56.271403 56.271403 9: seq: 18, identify offset=2240 count=40
Sent 21 56.272589 56.272589 9: seq: 19, identify offset=2280 count=40
Sent 22 56.273725 56.273725 9: seq: 1a, identify offset=2320 count=40
Sent 23 56.274805 56.274805 9: seq: 1b, identify offset=2360 count=40
Sent 24 56.275878 56.275878 9: seq: 1c, identify offset=2400 count=40
Sent 25 56.277056 56.277056 9: seq: 1d, identify offset=2440 count=40
Sent 26 56.278201 56.278201 9: seq: 1e, identify offset=2480 count=40
Sent 27 56.279257 56.279257 9: seq: 1f, identify offset=2520 count=40
Sent 28 56.280361 56.280361 9: seq: 10, identify offset=2560 count=40
Sent 29 56.281401 56.281401 9: seq: 11, identify offset=2600 count=40
Sent 30 56.282421 56.282421 9: seq: 12, identify offset=2640 count=40
Sent 31 56.283437 56.283437 9: seq: 13, identify offset=2680 count=40
Sent 32 56.284598 56.284598 9: seq: 14, identify offset=2720 count=40
Sent 33 56.285619 56.285619 9: seq: 15, identify offset=2760 count=40
Sent 34 56.286641 56.286641 9: seq: 16, identify offset=2800 count=40
Sent 35 56.287655 56.287655 9: seq: 17, identify offset=2840 count=40
Sent 36 56.288785 56.288785 9: seq: 18, identify offset=2880 count=40
Sent 37 56.289878 56.289878 9: seq: 19, identify offset=2920 count=40
Sent 38 56.290916 56.290916 9: seq: 1a, identify offset=2960 count=40
Sent 39 56.291952 56.291952 9: seq: 1b, identify offset=3000 count=40
Sent 40 56.293074 56.293074 9: seq: 1c, identify offset=3040 count=40
Sent 41 56.294132 56.294132 9: seq: 1d, identify offset=3080 count=40
Sent 42 56.295149 56.295149 9: seq: 1e, identify offset=3120 count=40
Sent 43 56.296249 56.296249 9: seq: 1f, identify offset=3160 count=40
Sent 44 56.297328 56.297328 9: seq: 10, identify offset=3200 count=40
Sent 45 56.298448 56.298448 9: seq: 11, identify offset=3240 count=40
Sent 46 56.299442 56.299442 9: seq: 12, identify offset=3280 count=40
Sent 47 56.300524 56.300524 9: seq: 13, identify offset=3320 count=40
Sent 48 56.301637 56.301637 9: seq: 14, identify offset=3360 count=40
Sent 49 56.302758 56.302758 9: seq: 15, identify offset=3400 count=40
Sent 50 56.303835 56.303835 9: seq: 16, identify offset=3440 count=40
Sent 51 56.305008 56.305008 9: seq: 17, identify offset=3480 count=40
Sent 52 56.306161 56.306161 9: seq: 18, identify offset=3520 count=40
Sent 53 56.307284 56.307284 9: seq: 19, identify offset=3560 count=40
Sent 54 56.308415 56.308415 9: seq: 1a, identify offset=3600 count=40
Sent 55 56.309503 56.309503 9: seq: 1b, identify offset=3640 count=40
Sent 56 56.310574 56.310574 9: seq: 1c, identify offset=3680 count=40
Sent 57 56.311543 56.311543 9: seq: 1d, identify offset=3720 count=40
Sent 58 56.312574 56.312574 9: seq: 1e, identify offset=3760 count=40
Sent 59 56.313558 56.313558 9: seq: 1f, identify offset=3800 count=40
Sent 60 56.314515 56.314515 9: seq: 10, identify offset=3811 count=40
Sent 61 56.392779 56.392779 6: seq: 11, get_uptime
Sent 62 56.444197 56.444197 6: seq: 12, get_clock
Sent 63 56.495600 56.495600 6: seq: 13, get_clock
Sent 64 56.547064 56.547064 6: seq: 14, get_clock
Sent 65 56.598517 56.598517 6: seq: 15, get_clock
Sent 66 56.650768 56.650768 6: seq: 16, get_clock
Sent 67 56.702174 56.702174 6: seq: 17, get_clock
Sent 68 56.753704 56.753704 6: seq: 18, get_clock
Sent 69 56.805152 56.805152 6: seq: 19, get_clock
Sent 70 56.807698 56.807698 6: seq: 1a, get_clock
Sent 71 56.842662 56.842662 6: seq: 1b, get_config
Sent 72 56.845595 56.845595 54: seq: 1c, allocate_oids count=6, config_spi_without_cs oid=0, config_adxl345 oid=1 spi_oid=0, config_spi_without_cs oid=2, config_adxl345 oid=3 spi_oid=2, config_digital_out oid=4 pin=gpiochip2/gpio2 value=0 default_value=0 max_duration=0, config_digital_out oid=5 pin=gpiochip2/gpio15 value=0 default_value=0 max_duration=0, spi_set_bus oid=0 spi_bus=spidev0.0 mode=3 rate=5000000, spi_set_bus oid=2 spi_bus=spidev0.1 mode=3 rate=5000000, finalize_config crc=1708225885, get_config
Sent 73 57.791592 57.791592 6: seq: 1d, get_clock
Sent 74 58.775764 58.775764 6: seq: 1e, get_clock
Sent 75 59.759821 59.759821 6: seq: 1f, get_clock
Sent 76 60.743924 60.743924 6: seq: 10, get_clock
Sent 77 61.728624 61.728624 6: seq: 11, get_clock
Sent 78 62.713458 62.713458 6: seq: 12, get_clock
Sent 79 63.698278 63.698278 6: seq: 13, get_clock
Sent 80 64.683255 64.683255 6: seq: 14, get_clock
Sent 81 65.668014 65.668014 6: seq: 15, get_clock
Sent 82 66.652527 66.652527 6: seq: 16, get_clock
Sent 83 67.637120 67.637120 6: seq: 17, get_clock
Sent 84 68.621643 68.621643 6: seq: 18, get_clock
Sent 85 69.606456 69.606456 6: seq: 19, get_clock
Sent 86 70.590848 70.590848 6: seq: 1a, get_clock
Sent 87 71.575561 71.575561 6: seq: 1b, get_clock
Sent 88 72.560427 72.560427 6: seq: 1c, get_clock
Sent 89 73.544995 73.544995 6: seq: 1d, get_clock
Sent 90 74.529972 74.529972 6: seq: 1e, get_clock
Sent 91 75.514909 75.514909 6: seq: 1f, get_clock
Sent 92 76.499446 76.499446 6: seq: 10, get_clock
Sent 93 77.483690 77.483690 6: seq: 11, get_clock
Sent 94 78.467969 78.467969 6: seq: 12, get_clock
Sent 95 79.452368 79.452368 6: seq: 13, get_clock
Sent 96 80.436879 80.436879 6: seq: 14, get_clock
Sent 97 81.421906 81.421906 6: seq: 15, get_clock
Sent 98 82.406825 82.406825 6: seq: 16, get_clock
Sent 99 83.391384 83.391384 6: seq: 17, get_clock
Dumping receive queue 100 messages
Receive: 0 56.256225 56.255937 49: seq: 1b, identify_response offset=1680 data=b'\x92\x99n\x9a\xba$\x9a\xcd\xe77\x12\x81\x19R2\xf6RL\xbbX\x8d\xb1\x0e\x87\xb4\x8b%b\xa9\xb4+\xc5\xb8\x19\xae\x7f\xe1\x1d-\xe8'
Receive: 1 56.257319 56.257064 49: seq: 1c, identify_response offset=1720 data=b'\xf7\xda!\xa8h\x1d=\x02\x85\x1f\x07\x03-\xa0\x80\x85u\xd24\x92\xb5\x8a%m\xacKq\x08\x9c\xbf\xa6F!\xeaP\xeb\x80\xf9\xae\x1c'
Receive: 2 56.258391 56.258142 49: seq: 1d, identify_response offset=1760 data=b"^\xef'c\xbcm:\x9d\t\x90GT\xef\xd6\x10\xf8c+ p\xf2\xf3\x8e\xb5\x9di\xb2\x0b\x1f\t\x84BQ\xd1!\xdf\xe89\x8c\xf8"
Receive: 3 56.259443 56.259214 49: seq: 1e, identify_response offset=1800 data=b'\xabI\xf0\xb0\xbc{z~\x96~8\xfd\x15\xc3cL\xca\xcf\xde\x7f:\xfb)\xfd\xe1\xfa\xe2g\xdc(\xfd\x1d\xcd>\x9c}\x9e\x9d\xccJ'
Receive: 4 56.260677 56.260413 49: seq: 1f, identify_response offset=1840 data=b'Q\x0f\x8f\xb3\xa3\xd9\xd5\xd9\xa9r\x08\x86\x0c4\xea\xea\x97\x0f\xf4\x1a\x85K\x8c\x84nnOoo\xd2\x9b\xcf\x1fn~N\xdf\x9e\xde\\'
Receive: 5 56.261773 56.261539 49: seq: 10, identify_response offset=1880 data=b'`\xee\x94\xe0\xf0\xc5\xd5\xd5\xc5u\x8a\xbf\xe9\xdbO\xb7?\xa6\x17\xe7\xef\x00\x18|\xc5\xc4j\x80TO\x953T\xdd\xd9\xaf7\xe1;D'
Receive: 6 56.262742 56.262590 49: seq: 11, identify_response offset=1920 data=b'\xf6*D\x075\x9b\x9d\xcc\xbfR\xa8\x0fH\x1a\xf6z>;\xf9\xcf\xfc(X\xfc\xf6\xd5\x85\xf1*Z>A\x8c\xcb\xf0,=?\xbd='
Receive: 7 56.263738 56.263544 49: seq: 12, identify_response offset=1960 data=b'M/\xae\xaf?]\xab:.\x0e!\x9f\x9fo\xcc \xcc~\xf9\xf1\xdf\xa7\xef/\xcf\xd3\xeb\x8b\xd3sE\xa02\xce\x9b\x8b\x8f7\x9f\xae'
Receive: 8 56.264947 56.264673 49: seq: 13, identify_response offset=2000 data=b'a\xf0\xea\xd3\xf5\xadEG&FU0\\\xe8\xfd\xe5Mx\xfe\x0b\x00\x8f\xf01:\xff\x91v\x07\xf6\xa3\x8a\xe9*\xf4CV\x95\xdcV'
Receive: 9 56.266096 56.265812 49: seq: 14, identify_response offset=2040 data=b'\xbfA\xe2\xd7\x8a\x86x\x0fW\xe6\x1dg\x9c\x7f\xff\x1c$\xb0\x10\x18\x9f\xc0B\x0b[@<3\x86E\x16\xb6\x82Ti\x0c\x8b-,\x08'
Receive: 10 56.267197 56.266944 49: seq: 15, identify_response offset=2080 data=b' \xd0\x1e\x03\x17\x0e\x18\xc7Sn\x12\x07\\\x86Sv\x96\x8e\xd5y0\xe5g\xe5\x80\xd1\xdc0\x04\x97\x04\xed\x1e\x1e\x10\x94,\x16\xe0\xb2'
Receive: 11 56.268337 56.268065 49: seq: 16, identify_response offset=2120 data=b'\x82\xc4\x81\x02\x0f\x04\xac\xfa\xa0\xd0\x03\x81\x1a\xfa\xa0\xc8\x03A\xd0\xef\x83b\x07J@\xdb}\xd0\xc2\x03\x05c6\x12\x0f\x14\x8d\xd9Xz'
Receive: 12 56.269468 56.269214 49: seq: 17, identify_response offset=2160 data=b'\xa0X\xb1\xf1u\xe4\xed\xb5\xaadA\x14EJS2\xb9\x98\xc7\xcbBi`\xd5\'\xab Qj\x87\x8fa"UA\xa0/\xf9b\x1e'
Receive: 13 56.270577 56.270328 49: seq: 18, identify_response offset=2200 data=b'\x84w\xa0\xbaz2\xad\xfb\xf0X\xf0\xfb\xb9\xd1\x7fd\x83\x86\x025\x84v\xe7\r\x86jp\x11\x84\xfe`\xa4\x06\x97Fb4\x18\xab\xc1'
Receive: 14 56.271652 56.271403 49: seq: 19, identify_response offset=2240 data=b'`\x1e\xc6\xfe\xe8\x82F\xc3\xd5h\xa9\x84F\xedI\xd1\xe8\x92F\xc1\x9b\x1b\x11\xc0\x05(\xd0\x1bv\xa2\x86\xfc\xa7\xd0\xfe\x87)?\xb5\xa1'
Receive: 15 56.272854 56.272589 49: seq: 1a, identify_response offset=2280 data=b'\x9c\x85J\xfa\xa7e\xc9\xb4\x9b1A\x86d\xd5 {\xb6\xcb \x0c\x80\x08\x13s\x13\xee\xc7\x10t\t\x9d\x96\xaa\xf1\xc2L\x19\xa6\xa0\x08'
Receive: 16 56.273976 56.273725 49: seq: 1b, identify_response offset=2320 data=b'\xe9,\xabY\xdd\xf4p7\xc3\x7f\xb3\x81\x18\xe4\xa1"b\xa6\x88\xd9\xc3N\xc03\xf9O\xc9Z\xb8\x01\x80E\n\xc1\x80\xf6\x9b\x1eC\x1e'
Receive: 17 56.275052 56.274805 49: seq: 1c, identify_response offset=2360 data=b'&\xc5\x16f\x85\xd5\xb3\x9e\t\xc92\xbd\x16\xc5&T\x1e\xd2\xc8\x12Q\xd1\xf7R\x11\x8bFU\xc4\xa7\xe2jX\x8e\xd7\xccT\x0e-='
Receive: 18 56.276185 56.275878 49: seq: 1d, identify_response offset=2400 data=b'8\xa53\xea\xbc\xb16\xeb$\x80\x94\x03S\xf5!\x03\xe88D\x9b\xb2W\xdd\xb3\xb3f(\x0b\xda\x97\xba`\xceo\x82\xd5[\xc8\xc9\x90'
Receive: 19 56.277343 56.277056 49: seq: 1e, identify_response offset=2440 data=b'- \xc6JEVP\x8e\xfb\x97P\xd9\xb7p/\x14\x10\xbc\x8a\xfe;j\xdd\xfdE\xb2j\xe8\xf9\xa3\xa5\x83\xf33x\xe3\x93\xc5R\x92'
Receive: 20 56.278433 56.278201 49: seq: 1f, identify_response offset=2480 data=b'\x81\xc0%+\x9b\x0e\x82\xcdB\x8b\xa6\xa5\xa5\x19\x95\xc00\xed\xbb\xc0\xcd3\xb8\xe0{,0V\r\xb0\xd1\xd4B_\xb1\x06/2xp'
Receive: 21 56.279472 56.279257 49: seq: 10, identify_response offset=2520 data=b'\xfd\x93we\xb4k\xecF\x10\x04\xdfq\x86\xf1\xd2\xd4\x95\xf9\x81J\xe2&6\x14u\x01\x1b)\xb3n\xabv\x07Z\xe3W\xc9\xa9\xa5\xf6'
Receive: 22 56.280574 56.280361 49: seq: 11, identify_response offset=2560 data=b"C\xd3\xe5\xdc\xd6\xa5\x99\xee\x95R\x07\xed\xdd\xd5\xe5'\x86.\x80\x81\xfe\x0b@C\xd1m \x01((U\xfd\xf1W\xcct\xb1o\xf4\xbd"
Receive: 23 56.281608 56.281401 49: seq: 12, identify_response offset=2600 data=b"V\xeb\x91\x88Xp\x1cS\xdf\x13.'\xf6\xf1\xf4\xec'\xca\xd9\xf1\r\xae\xaa\xeb[36\xf7\xc7\xf0\xae\xd2\x00\x8c\x14\x10pKA\t"
Receive: 24 56.282631 56.282421 49: seq: 13, identify_response offset=2640 data=b'\x05!\x97\x94Fy\xfb\xc7\x06\x1c\x13\xc5\x11\xe6&\xfa|\x1b\xd0y\xd5\n\xd6\xd2\xa2\x84\xee\x05Re\x8dH\t:\xd3\xc3\x86\xd87\xdf'
Receive: 25 56.283646 56.283437 49: seq: 14, identify_response offset=2680 data=b'\x7fC\xc9\xb1!2\xfdI\xd7f\xa5\\\x88\xe2V\x83\xe5\xe4\xe7\x8f\x01\x1a\xda\x00\xd88\x1c\x0f\x95\xc6\r\xb0j\xc0\x03h3`\xd8\xf0'
Receive: 26 56.284761 56.284598 49: seq: 15, identify_response offset=2720 data=b'\xc1\x98\xc6\x81m{\xc86\x84\xa84\xb9\x07\xd7%$\xbb~\xe4\xb1\x0e\x96\xcb\xc8Mc\xb1\xda\x8c\x9a&\x91=\xba\x8e\xe2*\x8aH\xa7'
Receive: 27 56.285834 56.285619 49: seq: 16, identify_response offset=2760 data=b'X\x06\xe4\xad\x8d]\x15\x13z\x85\xcb\xd1\xb8\xce\xc9\x95\xee\xd0\xca\xb1\xc7\xcf(\xa5\xf6q@9>d\x8f\xa8@+#o\x8a\xf1?p'
Receive: 28 56.286847 56.286641 49: seq: 17, identify_response offset=2800 data=b')3\xd0(^\xe7\x10\xb3\x1bG\x82\x00!%\x87%\xf3\x1d/\x86\x12\xed\x02\x881\x11d:lT\x1a\xc9\xef9\x1e\x14\xe6\x80\xcf\x13'
Receive: 29 56.287862 56.287655 49: seq: 18, identify_response offset=2840 data=b"\xec\xb2\xaeP\x9eTccg\xe6yl#\x17\x8d\x8cu\xe9\x0fx\x94*{f\xf0\xd4m\xca\xe6\x81\x12\xf6k\xae'\x80\xa9\xd0\xd0;"
Receive: 30 56.289016 56.288785 49: seq: 19, identify_response offset=2880 data=b'\xe5\x19\xc0\xeb\xb7\x19\xfa>,C\xdd\xa8\x92\xa3\xb6\x9b\x8e\xe3w\x10\xe8\xed\xb1\xa7wci\xf7\xb6\xc4\x1e\x04\\-\xfc1\xe7\x00\xf5['
Receive: 31 56.290103 56.289878 49: seq: 1a, identify_response offset=2920 data=b'h\x9448\xca\x11\xb7/Pa\xc6\xe2Q\x19a\xbc@\x81\xa9\xe9\r\xef\xf5q\xa9\x1d!\x86\xa8\x86\xca\x8c\x193\xc1mZ?\x83_'
Receive: 32 56.291134 56.290916 49: seq: 1b, identify_response offset=2960 data=b'"\xc0d\xea\xeaP\x1e\xd9\xff(\xe1F\xdf%}\xd3\xb0M\xa6\xc4E\xa2\xc2\x9e\xc4\xad\xaf=\xdau\xabv"\x15\xc5o\x95\x80\x91\x12'
Receive: 33 56.292210 56.291952 49: seq: 1c, identify_response offset=3000 data=b"<\xab\xe4*\xf4\xb8\x8570\x8b',\xdfk_&\xa9\x11n!\xa8\xcc\x16\x82\x85\xac\xcfuv\x87\x17j\xa3u\\I\x830\xa8B"
Receive: 34 56.293286 56.293074 49: seq: 1d, identify_response offset=3040 data=b'\xe5\x10@I\xe0\xccq\x06\x08\x05\xfb\x92zW\x0e\xac\x9c\xd1\xd4\x97R#|\x82\x94\x15\xb9\x03G\xfb`}\x9d\xd9`\xc2\xe0&\xc1\x1e'
Receive: 35 56.294335 56.294132 49: seq: 1e, identify_response offset=3080 data=b'\xae\xdb)\xb5\x9b\xa7`\x9f#PlN\x15\xc3\t\x16*\xda\x1e\xdar\x0f\xcd\xc9\x8ej|\x0e\x8c!\xc2\xcd\xd5\xa5\xca\xb4\xa9h\xbc\x0f'
Receive: 36 56.295355 56.295149 49: seq: 1f, identify_response offset=3120 data=b'\x93-GUOVS`\xdd\xd4\xc7wx;*\xbb\x1b/\x83\x1f\x978l\xed\xfc\x8cX\xb4\xafJF\x87D}\x14\x9c\x1aS\xae\xc4'
Receive: 37 56.296465 56.296249 49: seq: 10, identify_response offset=3160 data=b'|\xc9\x03\xf9\xceP\x7f\x01\x05\x82\x88\xa9\xa0\x0f=\xbcq\xe9\x00 \x1drj\xfa\xaeG\x9f\r\x99\xadd\xb9d*\x1f\xc2\x0fl0\xcd'
Receive: 38 56.297601 56.297328 49: seq: 11, identify_response offset=3200 data=b'C_\xa6\xc4?\xd4rh1\x1bFz\xac\xac9(9B\xaa\r\xd9Q\xdc\xdf\x98f\xd2\x03\x07!\x94\x10\xa0\xdd\x03KjW\x14w'
Receive: 39 56.298627 56.298448 49: seq: 12, identify_response offset=3240 data=b"Y\xc3Yc\xbf\xee\x91\x17i5\x94'\x9e\x0b\xc2\x1e\xe8\xa4;\x81\x01\x9fe\x02[\x11x@%\x9b0\x07\xe3\xea#'\x1b\x1a\xeaO"
Receive: 40 56.299606 56.299442 49: seq: 13, identify_response offset=3280 data=b'\x9f\nj\x8bJ\xec>\xe1\xcdA>-\x07\xb0\xe2\xda/()\xdbn;P\x93\x0e\xdc\x1b*\xaf0\x91\xac\xaa<\xe8\xce\xae\xaa\x8c\xa0'
Receive: 41 56.300760 56.300524 49: seq: 14, identify_response offset=3320 data=b'\xcd\xaa`\x85z\xde\xa3\x0e\x8b\x0f\xc4n\xc8\x81\xda\x00\xaeD\xf7\x0b6\xd1u\x1cJ\xfe\x18+"\x10\xb1\xef5\x9a1d\x87D?\n'
Receive: 42 56.301890 56.301637 49: seq: 15, identify_response offset=3360 data=b'V\x8b\x85J]\xf4K\xa2r\x17zI\x16\xca%\xc1K\x92,\xe19\xfa\xaa\x12\xe5\x1c\xb4\x00\xe8g\xf8\xf1\xd9\xbb\xab\xf7\xf7\xd1L\x15'
Receive: 43 56.303008 56.302758 49: seq: 16, identify_response offset=3400 data=b'A!\xee\x93\\\xba\xe48\x15\xf5\xb8\x9e\xa6\x8a\x94\x07\x0b\xb5\xde\xf7a#\x8a\xcckzP\xd5\x8d\xeaF\xc7\xd8`W\xc1\xa3\xab\xd2\x1c'
Receive: 44 56.304103 56.303835 49: seq: 17, identify_response offset=3440 data=b'\x07\xb6\xeb\xce0\x97WO\xaa\x90\xa3\x1a\xb78f\xf4E\x15\xc9@IR[\xd1Er\xf5\xd1\x8bj\xa6\xbc\xc4\xb6&\xd1\x0f\xa9[?'
Receive: 45 56.305299 56.305008 49: seq: 18, identify_response offset=3480 data=b'\xc0\x08\xcd\xb4\xcb%\xf8d\xdb\xfd>V\x8dtj\xb3\x18\xd8K"\x11\xe4\xd3i\xd6\xc8kU\x8f\xd8\xda5\x158\x87\xfdI\xfcN8'
Receive: 46 56.306458 56.306161 49: seq: 19, identify_response offset=3520 data=b"\xac\xbdrM\xdf\xd4\x1c\x92\xd7{P\xefZ\xa8\xb1k\xabz\xa8\xb6\xbfJe\xbb\xd7\x88\x8a\rX'N6M\x07\x8dD\x97\xae\x80\xb3"
Receive: 47 56.307506 56.307284 49: seq: 1a, identify_response offset=3560 data=b'\xd7Y\xf1\xf87\xda\xee\xc92:\xd0]\x1dQ\xc3\xf24\x81)\xa4\xf9\x13y\xf5q\x0cPm\xafq,{9\xe4\xb9\xea8\xabo\xd5'
Receive: 48 56.308640 56.308415 49: seq: 1b, identify_response offset=3600 data=b' \xe7oF_?\x1c\x07\xaal\x8e\x0e\x0f2\xf4\xf2\xcb\xa8\x84)1j\xads>iV\x06Q4\xa6\x195o\\\xdbA\xb7WL'
Receive: 49 56.309754 56.309503 49: seq: 1c, identify_response offset=3640 data=b'\xa1\x90\xaa\xf7\xfe\x94w\xc3f\xc3!H\xa0N\x1e$\xa1\xe0\xf3R\xe3\xd6$\xc97P\xa5q\x17U\x98\xd6\xe33\x87\x91\x1c\xaaS\xef'
Receive: 50 56.310738 56.310574 49: seq: 1d, identify_response offset=3680 data=b"\xa9\x84\xdf\xde\xf1t#0e\xeeg\t'\xba\xa4\x8a\xc4\xe0\xdeT\x02r\x1c\xac\xa8f \x9d\xf9\xc8\xa1\xd2?\xf2wm%\x0bW\xeb"
Receive: 51 56.311694 56.311543 49: seq: 1e, identify_response offset=3720 data=b'\x9d\x14\x82\xa9/\x8c\xe5\xf6\xf5\xc4\x95\xfd\x05s\x1a\x8c9a\xd9QU`uyx\x7f\x0bX\x18V\xec\x87~\xc5\xd7i]\x9e\xd5\x87'
Receive: 52 56.312738 56.312574 49: seq: 1f, identify_response offset=3760 data=b'\xf4m\xbf\x8b\x0fS\xa8*\xae\xaa\x11\xd0gV\xc3\xc8Wa\xedV\x7f\xf1\x0b\x9e\xf4~\xfe:\x88^\xcf\x8f\xe3$>\xde\xc6\xab\xcd\xfc'
Receive: 53 56.313706 56.313558 20: seq: 10, identify_response offset=3800 data=b'.\xca\xb3\xd9\xd7\xff\x01\xc3\x92\xb7\xc4'
Receive: 54 56.314784 56.314515 9: seq: 11, identify_response offset=3811 data=b''
Receive: 55 56.393086 56.392779 11: seq: 12, uptime high=1 clock=169649728
Receive: 56 56.444489 56.444197 10: seq: 13, clock clock=172221061
Receive: 57 56.495862 56.495600 10: seq: 14, clock clock=174789463
Receive: 58 56.547382 56.547064 10: seq: 15, clock clock=177362809
Receive: 59 56.598780 56.598517 10: seq: 16, clock clock=179932334
Receive: 60 56.651065 56.650768 10: seq: 17, clock clock=182547519
Receive: 61 56.702498 56.702174 10: seq: 18, clock clock=185118517
Receive: 62 56.754013 56.753704 10: seq: 19, clock clock=187694269
Receive: 63 56.805520 56.805152 10: seq: 1a, clock clock=190267207
Receive: 64 56.807866 56.807698 10: seq: 1b, clock clock=190390232
Receive: 65 56.842908 56.842662 10: seq: 1c, config is_config=0 crc=0 is_shutdown=0 move_count=0
Receive: 66 56.846239 56.845595 15: seq: 1d, config is_config=1 crc=1708225885 is_shutdown=0 move_count=1024
Receive: 67 57.791964 57.791592 11: seq: 1e, clock clock=239589163
Receive: 68 57.900360 57.791592 15: seq: 1e, stats count=160 sum=262503 sumsq=3728898
Receive: 69 58.776131 58.775764 11: seq: 1f, clock clock=288797676
Receive: 70 59.760264 59.759821 11: seq: 10, clock clock=337999713
Receive: 71 60.744260 60.743924 11: seq: 11, clock clock=387210198
Receive: 72 61.729167 61.728624 11: seq: 12, clock clock=436457323
Receive: 73 62.713707 62.713458 11: seq: 13, clock clock=485700959
Receive: 74 62.900053 62.713458 13: seq: 13, stats count=55 sum=24698 sumsq=222707
Receive: 75 63.698686 63.698278 11: seq: 14, clock clock=534951942
Receive: 76 64.683524 64.683255 11: seq: 15, clock clock=584205374
Receive: 77 65.668416 65.668014 11: seq: 16, clock clock=633451450
Receive: 78 66.652904 66.652527 11: seq: 17, clock clock=682682873
Receive: 79 67.637497 67.637120 11: seq: 18, clock clock=731918616
Receive: 80 67.899445 67.637120 13: seq: 18, stats count=55 sum=22154 sumsq=151688
Receive: 81 68.622065 68.621643 11: seq: 19, clock clock=781150387
Receive: 82 69.606852 69.606456 11: seq: 1a, clock clock=830394744
Receive: 83 70.591133 70.590848 11: seq: 1b, clock clock=879616398
Receive: 84 71.576305 71.575561 11: seq: 1c, clock clock=928875252
Receive: 85 72.560867 72.560427 11: seq: 1d, clock clock=978109207
Receive: 86 72.998924 72.560427 13: seq: 1d, stats count=56 sum=22242 sumsq=148341
Receive: 87 73.545305 73.544995 11: seq: 1e, clock clock=1027336410
Receive: 88 74.530446 74.529972 11: seq: 1f, clock clock=1076594255
Receive: 89 75.515205 75.514909 11: seq: 10, clock clock=1125835867
Receive: 90 76.499849 76.499446 11: seq: 11, clock clock=1175071104
Receive: 91 77.484007 77.483690 11: seq: 12, clock clock=1224284345
Receive: 92 77.998634 77.483690 13: seq: 12, stats count=55 sum=22415 sumsq=160180
Receive: 93 78.468326 78.467969 11: seq: 13, clock clock=1273503619
Receive: 94 79.452732 79.452368 11: seq: 14, clock clock=1322725277
Receive: 95 80.437174 80.436879 11: seq: 15, clock clock=1371950988
Receive: 96 81.422262 81.421906 11: seq: 16, clock clock=1421207527
Receive: 97 82.407175 82.406825 11: seq: 17, clock clock=1470453833
Receive: 98 82.998497 82.406825 13: seq: 17, stats count=55 sum=23072 sumsq=167165
Receive: 99 83.391741 83.391384 11: seq: 18, clock clock=1519681223
gcode state: absolute_coord=True absolute_extrude=True base_position=[0.0, 0.0, 0.0, 0.0] last_position=[0.0, 0.0, 0.0, 0.0] homing_position=[0.0, 0.0, 0.0, 0.0] speed_factor=0.016666666666666666 extrude_factor=1.0 speed=25.0
Virtual sdcard (115074): '.993,202.807],[221.993,202.301],[221.993,201.99],[221.992,201.523],[221.992,200.901],[221.991,200.435],[221.991,199.969],[221.991,199.669],[221.99,199.036],[221.99,198.725],[221.989,198.259],[221.989,197.948],[221.989,197.482],[221.988,197.171],[221.988,196.91],[221.988,196.565],[221.988,196.239],[221.987,195.875],[221.987,195.531],[221.987,194.997],[221.986,194.687],[221.986,194.324],[221.986,193.806],[221.985,193.445],[221.985,193.134],[221.985,192.772],[221.985,192.514],[221.985,192.427],[221.984,192.203],[221.984,191.91],[221.984,191.738],[221.984,191.393],[221.983,191.118],[221.983,190.653],[221.983,190.498],[221.982,189.878],[221.982,189.723],[221.982,189.505],[221.982,189.258],[221.982,188.948],[221.981,188.462],[221.981,188.329],[221.981,187.864],[221.981,187.599],[221.98,187.4],[221.98,187.255],[221.98,187.082],[221.98,186.737],[221.98,186.73]]\nM73 P0 R64\nM73 C33\nM106 S0\nM106 P2 S0\n;TYPE:Custom\n;ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\n'
Upcoming (116098): 'M190 S70\nG90\nG28 ;home\n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n'
Stats 84.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=3040 bytes_read=11560 bytes_retransmit=9 bytes_invalid=0 send_seq=256 receive_seq=256 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=84002344 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=1164 bytes_read=5908 bytes_retransmit=0 bytes_invalid=0 send_seq=154 receive_seq=154 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50004182 adj=50001757 sd_pos=116098 heater_bed: target=70 temp=40.6 pwm=1.000 RockchipHost: temp=35.0 STM32MCU: temp=22.8 print_time=31.413 buffer_time=0.070 print_stall=0 extruder: target=140 temp=74.2 pwm=1.000 sysload=2.31 cputime=8.148 memavail=698580
Exiting SD card print (position 116107)
Stats 85.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=3082 bytes_read=11739 bytes_retransmit=9 bytes_invalid=0 send_seq=259 receive_seq=259 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=84002309 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=1170 bytes_read=5924 bytes_retransmit=0 bytes_invalid=0 send_seq=155 receive_seq=155 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50004109 adj=50001635 heater_bed: target=70 temp=40.6 pwm=0.000 RockchipHost: temp=33.2 STM32MCU: temp=22.7 print_time=31.413 buffer_time=0.000 print_stall=0 extruder: target=140 temp=74.0 pwm=0.000 sysload=2.13 cputime=8.167 memavail=699368
Stats 86.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=3088 bytes_read=11887 bytes_retransmit=9 bytes_invalid=0 send_seq=260 receive_seq=260 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=84002296 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=1176 bytes_read=5940 bytes_retransmit=0 bytes_invalid=0 send_seq=156 receive_seq=156 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50004050 adj=50001493 heater_bed: target=70 temp=40.5 pwm=0.000 RockchipHost: temp=32.3 STM32MCU: temp=22.8 print_time=31.413 buffer_time=0.000 print_stall=0 extruder: target=140 temp=73.8 pwm=0.000 sysload=2.13 cputime=8.182 memavail=702020