API tools faq
paste
Guest User

Untitled

a guest
Oct 5th, 2026
61
0
Never
2
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 61.66 KB | Software | 0 0
raw download clone embed print report
  1.  
  2. [ 432.382564] watchdog: watchdog0: watchdog did not stop!
  3. [ 432.389525] systemd-shutdown[1]: Syncing filesystems and block devices.
  4. [ 432.396245] systemd-shutdown[1]: Rebooting.
  5. [ 432.475430] kvm: exiting hardware virtualization
  6. [ 432.480339] reboot: Restarting system
  7. ......
  8.  
  9.  
  10. [68]HELLO! BOOT0 is starting!
  11. [71]BOOT0 commit : {1d640659}
  12. [74]board gpio withstand voltage auto mode
  13. [90]dram_para_total:0xf
  14. [92]vaild para:6 select dram para0
  15. [95]fdt returned -9
  16. [mmc]: mmc driver ver 2025-10-16 17:10
  17. [mmc]: Wrong media type 0x0
  18. [mmc]: ***Try SD card 0***
  19. [mmc]: HSSDR52/SDR25 4 bit
  20. [mmc]: 50000000 Hz
  21. [mmc]: 15271 MB
  22. [mmc]: ***SD/MMC 0 init OK!!!***
  23. [129]boot param - magic error
  24. [132]DRAM BOOT DRIVE INFO: V0.6034
  25. [136]DRAM_VCC set to 560 mv
  26. [139]DRAM CLK =2400 MHZ
  27. [142]DRAM Type =9 (8:LPDDR4,9:LPDDR5)
  28. [279]Training result is = 7
  29. [281]DRAM Pstate 1 training, frequency is 1200 Mhz
  30. [455]Training result is = 7
  31. [458]DRAM Pstate 2 training, frequency is 800 Mhz
  32. [797]Training result is = 7
  33. [799]DRAM Pstate 3 training, frequency is 400 Mhz
  34. [4530]Training result is = 7
  35. [4533]DRAM Pstate 0 training, frequency is 2400 Mhz
  36. [4541]Actual DRAM SIZE =4096 M
  37. [4544]DRAM SIZE =4096 MBytes, para1 = a0fa, para2 = 10001001, dram_tpr13 = 65
  38. [4553]DRAM simple test OK.
  39. [4559]error:bad magic.
  40. gpt magic error, 1073741824 != 0
  41. gpt data not valid
  42. inbuf:40800010
  43. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  44. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  45. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  46. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  47. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  48. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  49. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  50. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  51. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  52. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  53. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  54. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  55. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  56. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  57. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  58. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  59. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  60. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  61. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  62. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  63. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  64. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  65. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  66. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  67. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  68. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  69. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  70. 00 00 00 00 00 00 00 00 01 00 53 a7 00 00 00 0a
  71. 09 02 83 fe ff ff 00 80 00 00 00 b8 dc 01 00 00
  72. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  73. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  74. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa
  75. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  76. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  77. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  78. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  79. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  80. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  81. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  82. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  83. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  84. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  85. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  86. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  87. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  88. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  89. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  90. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  91. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  92. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  93. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  94. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  95. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  96. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  97. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  98. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  99. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  100. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  101. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  102. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  103. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  104. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  105. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  106. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  107. gpt init is error
  108. gpt magic error, 1073741824 != 0
  109. gpt data not valid
  110. inbuf:40800010
  111. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  112. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  113. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  114. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  115. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  116. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  117. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  118. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  119. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  120. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  121. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  122. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  123. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  124. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  125. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  126. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  127. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  128. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  129. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  130. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  131. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  132. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  133. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  134. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  135. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  136. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  137. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  138. 00 00 00 00 00 00 00 00 01 00 53 a7 00 00 00 0a
  139. 09 02 83 fe ff ff 00 80 00 00 00 b8 dc 01 00 00
  140. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  141. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  142. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa
  143. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  144. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  145. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  146. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  147. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  148. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  149. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  150. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  151. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  152. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  153. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  154. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  155. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  156. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  157. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  158. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  159. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  160. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  161. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  162. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  163. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  164. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  165. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  166. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  167. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  168. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  169. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  170. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  171. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  172. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  173. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  174. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  175. gpt init is error
  176. [5299]mmc not para
  177. [5301]Jump to U-Boot: uboot_base = 0x47800000
  178.  
  179. U-Boot SPL 2026.04-2-boot-dlan17-g6a998fbcf809-dirty (Jun 30 2026 - 09:53:23 +0000)
  180. DRAM: 4096 MiB
  181. Trying to boot from RAM
  182. NOTICE: BL31: v2.15.0(release):3d425f4f4-dirty
  183. NOTICE: BL31: Built : 09:53:23, Jun 30 2026
  184. NOTICE: BL31: Detected Allwinner A733 SoC (1903)
  185. NOTICE: BL31: Found U-Boot DTB at 0xa0cc598, model: Radxa A7S
  186. NOTICE: BL31: CPU_BACK_PLL 0x40104a00 -> 0xf8104a00, enabled at reset factors
  187. NOTICE: BL31: ACTLR_EL3 0x1000, CLUSTERPMUEN 1 (EL2 access to the DSU PMU)
  188. NOTICE: PSCI: native CPU_SUSPEND armed 0xff, core 0 PWPR 00000108->00000100, reset to BL31 0xff
  189. NOTICE: DSU: cpu0 cluster power required, CLUSTERPWRSTAT f0->f1
  190. NOTICE: DSU: PPU PWPR 01040108 PWSR 01040108 DISR 0f000100 IMR 0000003a ISR 00000000, PLL_GATING 00000001, DSU_STATUS 00000000, CLUSTERPWRDN 0, CLUSTERPWRSTAT f0->f1
  191. NOTICE: DSU: PPU PWPR 01040108 -> 01040100, cluster OFF state offered
  192.  
  193.  
  194. U-Boot 2026.04-2-boot-dlan17-g6a998fbcf809-dirty (Jun 30 2026 - 09:53:23 +0000) Allwinner Technology
  195.  
  196. CPU: Allwinner A733 (SUN60I)
  197. Model: Radxa A7S
  198. DRAM: 4 GiB
  199. Core: 88 devices, 27 uclasses, devicetree: separate
  200. WDT: Started watchdog@7021000 with servicing every 1000ms (16s timeout)
  201. MMC: mmc@4020000: 0, mmc@4022000: 1
  202. Loading Environment from FAT... Unable to use mmc 0:1...
  203. In: serial@2500000
  204. Out: serial@2500000
  205. Err: serial@2500000
  206. sunxi_set_gate: (CLK#133) unhandled
  207. sunxi_set_reset: (RST#55) unhandled
  208. Allwinner mUSB OTG (Peripheral)
  209. Override default fdtfile to allwinner/sun60i-a733-cubie-a7s.dtb
  210. Net: Checking device: eeprom@50
  211. Found compatible device: eeprom@50
  212. !!!! i2c_bus_num: 0
  213. !!!! i2c_get_chip_for_busnum device: eeprom@50
  214. ROCK EEPROM format v1
  215.  
  216. --------EEPROM INFO--------
  217. Vendor: Radxa Computer
  218. Product full SN: RS504-D4
  219. Data version: 0x1
  220. BOM revision: V1.105
  221. Ethernet0 MAC address: 40:fe:0d:00:0a:99
  222. Ethernet1 MAC address: 00:00:00:00:00:00
  223. Ethernet2 MAC address: 00:00:00:00:00:00
  224. Ethernet3 MAC address: 00:00:00:00:00:00
  225. Ethernet4 MAC address: 00:00:00:00:00:00
  226. Ethernet5 MAC address: 00:00:00:00:00:00
  227. Ethernet6 MAC address: 00:00:00:00:00:00
  228. Ethernet7 MAC address: 00:00:00:00:00:00
  229. Ethernet8 MAC address: 00:00:00:00:00:00
  230. Ethernet9 MAC address: 00:00:00:00:00:00
  231. --------EEPROM INFO--------
  232.  
  233. eth0: ethernet@4500000using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
  234. MAC de:ad:be:ef:00:01
  235. HOST MAC de:ad:be:ef:00:00
  236. , eth1: usb_ether
  237. starting USB...
  238. USB EHCI 1.00
  239. USB OHCI 1.0
  240. USB EHCI 1.00
  241. USB OHCI 1.0
  242. Bus usb@4101000: 1 USB Device(s) found
  243. Bus usb@4101400: 1 USB Device(s) found
  244. Bus usb@4200000: 2 USB Device(s) found
  245. Bus usb@4200400: 1 USB Device(s) found
  246. scanning usb for storage devices... 0 Storage Device(s) found
  247. 
  248. Hit any key to stop autoboot: 3
  249. Hit any key to stop autoboot: 2
  250. Hit any key to stop autoboot: 1
  251. Hit any key to stop autoboot: 0
  252. Card did not respond to voltage select! : -110
  253. switch to partitions #0, OK
  254. mmc0 is current device
  255. Scanning mmc 0:1...
  256. Found /boot/extlinux/extlinux.conf
  257. Retrieving file: /boot/extlinux/extlinux.conf
  258. 1: a7s
  259. Retrieving file: /boot/Image
  260. append: root=PARTUUID=a7530001-01 rootwait rw console=ttyS0,115200 earlycon consoleblank=0 watchdog.open_timeout=60
  261. Retrieving file: /boot/sun60i-a733-cubie-a7s-minimal.dtb
  262. Starting ARISC with fdt_addr_r=0x4FA00000 ...
  263. [SCP] INFO: starting arisc cpu...
  264. [SCP] INFO: fdt_addr_r = 0x4fa00000
  265. [SCP] INFO: dtb magic verified at 0x4fa00000
  266. Moving Image from 0x40080000 to 0x40200000, end=0x416b0000
  267. ## Flattened Device Tree blob at 4fa00000
  268. Booting using the fdt blob at 0x4fa00000
  269. Working FDT set to 4fa00000
  270. Loading Device Tree to 0000000049ff3000, end 0000000049ffffbb ... OK
  271. Working FDT set to 49ff3000
  272.  
  273. Starting kernel ...
  274.  
  275. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
  276. [ 0.000000] Linux version 6.18.54 (root@a7s-build) (aarch64-linux-gnu-gcc (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP PREEMPT Sun, 04 Oct 2026 19:50:35 +0000
  277. [ 0.000000] KASLR disabled due to lack of seed
  278. [ 0.000000] Machine model: Radxa Cubie A7S (A733 minimal M1)
  279. [ 0.000000] earlycon: uart0 at MMIO32 0x0000000002500000 (options '115200n8')
  280. [ 0.000000] printk: legacy bootconsole [uart0] enabled
  281. [ 0.000000] OF: reserved mem: 0x0000000048100000..0x00000000481fffff (1024 KiB) map non-reusable scp@48100000
  282. [ 0.000000] OF: reserved mem: 0x0000000060000000..0x00000000600fffff (1024 KiB) map non-reusable ramoops@60000000
  283. [ 0.000000] Zone ranges:
  284. [ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff]
  285. [ 0.000000] DMA32 empty
  286. [ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff]
  287. [ 0.000000] Movable zone start for each node
  288. [ 0.000000] Early memory node ranges
  289. [ 0.000000] node 0: [mem 0x0000000040000000-0x000000013fffffff]
  290. [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000013fffffff]
  291. [ 0.000000] cma: Reserved 256 MiB at 0x00000000f0000000
  292. [ 0.000000] psci: probing for conduit method from DT.
  293. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  294. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  295. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  296. [ 0.000000] psci: SMC Calling Convention v1.5
  297. [ 0.000000] percpu: Embedded 33 pages/cpu s96856 r8192 d30120 u135168
  298. [ 0.000000] Detected VIPT I-cache on CPU0
  299. [ 0.000000] CPU features: detected: GICv3 CPU interface
  300. [ 0.000000] CPU features: detected: Virtualization Host Extensions
  301. [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
  302. [ 0.000000] alternatives: applying boot alternatives
  303. [ 0.000000] Kernel command line: root=PARTUUID=a7530001-01 rootwait rw console=ttyS0,115200 earlycon consoleblank=0 watchdog.open_timeout=60
  304. [ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
  305. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  306. [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  307. [ 0.000000] software IO TLB: area num 8.
  308. [ 0.000000] software IO TLB: mapped [mem 0x00000000ec000000-0x00000000f0000000] (64MB)
  309. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1048576
  310. [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
  311. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  312. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  313. [ 0.000000] rcu: RCU event tracing is enabled.
  314. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
  315. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  316. [ 0.000000] Tracing variant of Tasks RCU enabled.
  317. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  318. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
  319. [ 0.000000] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
  320. [ 0.000000] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
  321. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  322. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  323. [ 0.000000] GICv3: 256 SPIs implemented
  324. [ 0.000000] GICv3: 0 Extended SPIs implemented
  325. [ 0.000000] Root IRQ handler: gic_handle_irq
  326. [ 0.000000] GICv3: GICv3 features: 16 PPIs
  327. [ 0.000000] GICv3: GICD_CTLR.DS=0, SCR_EL3.FIQ=0
  328. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000003460000
  329. [ 0.000000] ITS: No ITS available, not enabling LPIs
  330. [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  331. [ 0.000000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  332. [ 0.000000] arch_timer: cp15 timer running at 24.00MHz (phys).
  333. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  334. [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  335. [ 0.008146] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 73510017198 ns
  336. [ 0.017781] Console: colour dummy device 80x25
  337. [ 0.022331] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  338. [ 0.032600] pid_max: default: 32768 minimum: 301
  339. [ 0.037350] LSM: initializing lsm=capability
  340. [ 0.041759] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  341. [ 0.049168] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  342. [ 0.059558] rcu: Hierarchical SRCU implementation.
  343. [ 0.064395] rcu: Max phase no-delay instances is 1000.
  344. [ 0.069874] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
  345. [ 0.079208] smp: Bringing up secondary CPUs ...
  346. [ 0.084439] Detected VIPT I-cache on CPU1
  347. [ 0.084658] GICv3: CPU1: found redistributor 100 region 0:0x0000000003480000
  348. [ 0.084703] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
  349. [ 0.085521] Detected VIPT I-cache on CPU2
  350. [ 0.085733] GICv3: CPU2: found redistributor 200 region 0:0x00000000034a0000
  351. [ 0.085773] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
  352. [ 0.086560] Detected VIPT I-cache on CPU3
  353. [ 0.086764] GICv3: CPU3: found redistributor 300 region 0:0x00000000034c0000
  354. [ 0.086798] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
  355. [ 0.087572] Detected VIPT I-cache on CPU4
  356. [ 0.087775] GICv3: CPU4: found redistributor 400 region 0:0x00000000034e0000
  357. [ 0.087809] CPU4: Booted secondary processor 0x0000000400 [0x412fd050]
  358. [ 0.088564] Detected VIPT I-cache on CPU5
  359. [ 0.088765] GICv3: CPU5: found redistributor 500 region 0:0x0000000003500000
  360. [ 0.088797] CPU5: Booted secondary processor 0x0000000500 [0x412fd050]
  361. [ 0.089722] CPU features: detected: Spectre-v4
  362. [ 0.089728] CPU features: detected: Spectre-BHB
  363. [ 0.089734] CPU features: detected: Broken broadcast TLBI completion
  364. [ 0.089736] CPU features: detected: SSBS not fully self-synchronizing
  365. [ 0.089738] Detected PIPT I-cache on CPU6
  366. [ 0.089836] GICv3: CPU6: found redistributor 600 region 0:0x0000000003520000
  367. [ 0.089854] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b1]
  368. [ 0.090573] Detected PIPT I-cache on CPU7
  369. [ 0.090677] GICv3: CPU7: found redistributor 700 region 0:0x0000000003540000
  370. [ 0.090697] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b1]
  371. [ 0.090790] smp: Brought up 1 node, 8 CPUs
  372. [ 0.239868] SMP: Total of 8 processors activated.
  373. [ 0.244577] CPU: All CPU(s) started at EL2
  374. [ 0.248700] CPU features: detected: 32-bit EL0 Support
  375. [ 0.253841] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
  376. [ 0.262480] CPU features: detected: Common not Private translations
  377. [ 0.268765] CPU features: detected: CRC32 instructions
  378. [ 0.273916] CPU features: detected: RCpc load-acquire (LDAPR)
  379. [ 0.279660] CPU features: detected: LSE atomic instructions
  380. [ 0.285247] CPU features: detected: Privileged Access Never
  381. [ 0.290816] CPU features: detected: PMUv3
  382. [ 0.294851] CPU features: detected: RAS Extension Support
  383. [ 0.300251] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
  384. [ 0.307271] alternatives: applying system-wide alternatives
  385. [ 0.315643] CPU features: detected: Hardware dirty bit management on CPU6-7
  386. [ 0.323148] Memory: 3752820K/4194304K available (12224K kernel code, 2046K rwdata, 4672K rodata, 1472K init, 508K bss, 170816K reserved, 262144K cma-reserved)
  387. [ 0.338676] devtmpfs: initialized
  388. [ 0.345401] posixtimers hash table entries: 4096 (order: 4, 65536 bytes, linear)
  389. [ 0.353099] futex hash table entries: 2048 (131072 bytes on 1 NUMA nodes, total 128 KiB, linear).
  390. [ 0.363678] 27472 pages in range for non-PLT usage
  391. [ 0.363684] 518992 pages in range for PLT usage
  392. [ 0.368944] pinctrl core: initialized pinctrl subsystem
  393. [ 0.381213] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  394. [ 0.387867] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
  395. [ 0.395323] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  396. [ 0.403651] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  397. [ 0.411720] thermal_sys: Registered thermal governor 'step_wise'
  398. [ 0.411724] thermal_sys: Registered thermal governor 'power_allocator'
  399. [ 0.418045] cpuidle: using governor menu
  400. [ 0.428647] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  401. [ 0.435929] ASID allocator initialised with 65536 entries
  402. [ 0.441434] Serial: AMBA PL011 UART driver
  403. [ 0.446022] ramoops: uncorrectable error in header
  404. [ 0.463196] pstore: Using crash dump compression: deflate
  405. [ 0.468849] printk: legacy console [ramoops-1] enabled
  406. [ 0.482041] pstore: Registered ramoops as persistent store backend
  407. [ 0.488562] ramoops: using 0x100000@0x60000000, ecc: 16
  408. [ 0.496530] /soc/interrupt-controller@3400000: Fixed dependency cycle(s) with /soc/interrupt-controller@3400000
  409. [ 0.507534] /soc/mixer@5100000: Fixed dependency cycle(s) with /soc/lcd-controller@5731000
  410. [ 0.516266] /soc/lcd-controller@5731000: Fixed dependency cycle(s) with /soc/displayport@5740000
  411. [ 0.525546] /soc/lcd-controller@5731000: Fixed dependency cycle(s) with /soc/mixer@5100000
  412. [ 0.534300] /soc/displayport@5740000: Fixed dependency cycle(s) with /soc/i2c@7084000/usb-pd@4e/connector
  413. [ 0.544400] /soc/displayport@5740000: Fixed dependency cycle(s) with /soc/lcd-controller@5731000
  414. [ 0.553363] /soc/displayport@5740000: Fixed dependency cycle(s) with /soc/phy@6c01000
  415. [ 0.561361] /soc/usb@6a00000: Fixed dependency cycle(s) with /soc/i2c@7084000/usb-pd@4e/connector
  416. [ 0.570862] /soc/usb@6a00000: Fixed dependency cycle(s) with /soc/phy@6c01000
  417. [ 0.578109] /soc/phy@6c01000: Fixed dependency cycle(s) with /soc/i2c@7084000/usb-pd@4e/connector
  418. [ 0.587555] /soc/i2c@7084000/usb-pd@4e/connector: Fixed dependency cycle(s) with /soc/displayport@5740000
  419. [ 0.598132] /soc/i2c@7084000/usb-pd@4e/connector: Fixed dependency cycle(s) with /soc/phy@6c01000
  420. [ 0.607528] /soc/i2c@7084000/usb-pd@4e/connector: Fixed dependency cycle(s) with /soc/usb@6a00000
  421. [ 0.617599] /soc/mixer@5100000: Fixed dependency cycle(s) with /soc/lcd-controller@5731000
  422. [ 0.626798] /soc/mixer@5100000: Fixed dependency cycle(s) with /soc/lcd-controller@5731000
  423. [ 0.635214] /soc/lcd-controller@5731000: Fixed dependency cycle(s) with /soc/displayport@5740000
  424. [ 0.644887] /soc/lcd-controller@5731000: Fixed dependency cycle(s) with /soc/mixer@5100000
  425. [ 0.653361] /soc/lcd-controller@5731000: Fixed dependency cycle(s) with /soc/displayport@5740000
  426. [ 0.662783] /soc/displayport@5740000: Fixed dependency cycle(s) with /soc/i2c@7084000/usb-pd@4e/connector
  427. [ 0.672880] /soc/displayport@5740000: Fixed dependency cycle(s) with /soc/lcd-controller@5731000
  428. [ 0.681774] /soc/displayport@5740000: Fixed dependency cycle(s) with /soc/phy@6c01000
  429. [ 0.690357] /soc/usb@6a00000: Fixed dependency cycle(s) with /soc/i2c@7084000/usb-pd@4e/connector
  430. [ 0.699376] /soc/usb@6a00000: Fixed dependency cycle(s) with /soc/phy@6c01000
  431. [ 0.706789] /soc/usb@6a00000: Fixed dependency cycle(s) with /soc/phy@6c01000
  432. [ 0.714377] /soc/displayport@5740000: Fixed dependency cycle(s) with /soc/phy@6c01000
  433. [ 0.722703] /soc/phy@6c01000: Fixed dependency cycle(s) with /soc/i2c@7084000/usb-pd@4e/connector
  434. [ 0.732856] /soc/i2c@7084000/usb-pd@4e/connector: Fixed dependency cycle(s) with /soc/displayport@5740000
  435. [ 0.742969] /soc/i2c@7084000/usb-pd@4e/connector: Fixed dependency cycle(s) with /soc/phy@6c01000
  436. [ 0.752372] /soc/i2c@7084000/usb-pd@4e/connector: Fixed dependency cycle(s) with /soc/usb@6a00000
  437. [ 0.763496] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
  438. [ 0.770647] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
  439. [ 0.777360] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
  440. [ 0.784599] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
  441. [ 0.791302] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
  442. [ 0.798375] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
  443. [ 0.804785] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
  444. [ 0.811998] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
  445. [ 0.819508] iommu: Default domain type: Translated
  446. [ 0.824485] iommu: DMA domain TLB invalidation policy: strict mode
  447. [ 0.831294] SCSI subsystem initialized
  448. [ 0.835402] usbcore: registered new interface driver usbfs
  449. [ 0.841192] usbcore: registered new interface driver hub
  450. [ 0.846851] usbcore: registered new device driver usb
  451. [ 0.852341] pps_core: LinuxPPS API ver. 1 registered
  452. [ 0.857788] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  453. [ 0.867415] PTP clock support registered
  454. [ 0.872426] vgaarb: loaded
  455. [ 0.875390] clocksource: Switched to clocksource arch_sys_counter
  456. [ 0.882025] VFS: Disk quotas dquot_6.6.0
  457. [ 0.886057] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  458. [ 0.897752] NET: Registered PF_INET protocol family
  459. [ 0.902880] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
  460. [ 0.912237] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
  461. [ 0.921177] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  462. [ 0.929354] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
  463. [ 0.938140] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
  464. [ 0.946704] TCP: Hash tables configured (established 32768 bind 32768)
  465. [ 0.953673] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
  466. [ 0.960647] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
  467. [ 0.968486] NET: Registered PF_UNIX/PF_LOCAL protocol family
  468. [ 0.974303] PCI: CLS 0 bytes, default 64
  469. [ 0.980237] kvm [1]: nv: 568 coarse grained trap handlers
  470. [ 0.986201] kvm [1]: IPA Size Limit: 40 bits
  471. [ 0.990615] kvm [1]: GICv3: no GICV resource entry
  472. [ 0.995444] kvm [1]: disabling GICv2 emulation
  473. [ 1.000018] kvm [1]: GIC system register CPU interface enabled
  474. [ 1.006170] kvm [1]: vgic interrupt IRQ9
  475. [ 1.010335] kvm [1]: VHE mode initialized successfully
  476. [ 1.016444] Initialise system trusted keyrings
  477. [ 1.021389] workingset: timestamp_bits=46 max_order=20 bucket_order=0
  478. [ 1.028381] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  479. [ 1.065707] Key type asymmetric registered
  480. [ 1.070155] Asymmetric key parser 'x509' registered
  481. [ 1.075334] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  482. [ 1.083141] io scheduler mq-deadline registered
  483. [ 1.087922] io scheduler kyber registered
  484. [ 1.092204] io scheduler bfq registered
  485. [ 1.097936] ledtrig-cpu: registered to indicate activity on CPUs
  486. [ 1.105560] sunxi-pck-600 7060000.power-controller: domain "GPU_CORE" is not powered at boot (PWSR reads off)
  487. [ 1.118426] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  488. [ 1.130362] loop: module loaded
  489. [ 1.134793] tun: Universal TUN/TAP device driver, 1.6
  490. [ 1.140814] usbcore: registered new interface driver uas
  491. [ 1.146446] usbcore: registered new interface driver usb-storage
  492. [ 1.153243] sun6i-rtc 7090000.rtc: LOSC from the external 32768 Hz crystal (LOSC_CTRL 0x0000401d, STA 0x00000001)
  493. [ 1.164023] sun6i-rtc 7090000.rtc: registered as rtc0
  494. [ 1.169473] sun6i-rtc 7090000.rtc: setting system clock to 2026-10-05T05:28:00 UTC (1791178080)
  495. [ 1.178356] i2c_dev: i2c /dev entries driver
  496. [ 1.184031] SMCCC: SOC_ID: ID = jep106:091e:1903 Revision = 0x00000001
  497. [ 1.191208] usbcore: registered new interface driver usbhid
  498. [ 1.197170] usbhid: USB HID core driver
  499. [ 1.202636] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 (0,8000003f) counters available
  500. [ 1.212920] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 (0,8000003f) counters available
  501. [ 1.223612] NET: Registered PF_INET6 protocol family
  502. [ 1.229980] Segment Routing with IPv6
  503. [ 1.233841] In-situ OAM (IOAM) with IPv6
  504. [ 1.237909] NET: Registered PF_PACKET protocol family
  505. [ 1.246303] registered taskstats version 1
  506. [ 1.250570] Loading compiled-in X.509 certificates
  507. [ 1.269000] sun60i-a733-cpu-ccu 8870000.clock-controller: DSU parks on PERI0_600M during a relock
  508. [ 1.277969] sun60i-a733-cpu-ccu 8870000.clock-controller: core clusters park on CPU_BACK_PLL (975000000 Hz) during a relock
  509. [ 1.289274] sun60i-a733-cpu-ccu 8870000.clock-controller: A733 CPU PLLs on a 26000000 Hz reference, N 25..86
  510. [ 1.307646] platform display-engine: Adding to iommu group 0
  511. [ 1.313620] platform 5100000.mixer: Adding to iommu group 0
  512. [ 1.319935] sun60i-a733-tcon-tv 5731000.lcd-controller: A733 TCON_TV1 on 5731000.lcd-controller, idle until a KMS master binds
  513. [ 1.331924] sun60i-a733-de-mixer 5100000.mixer: A733 display engine on 5100000.mixer, idle until a KMS master binds
  514. [ 1.343190] sun60i-a733-kms display-engine: bound 5100000.mixer (ops sun60i_de_component_ops)
  515. [ 1.352254] sun60i-a733-kms display-engine: bound 5731000.lcd-controller (ops sun60i_tcon_tv_component_ops)
  516. [ 1.366143] sunxi-wdt 7021000.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  517. [ 1.374615] sun50i_cpufreq_nvmem: A733: speed bin 4 (fuse word 0x00000498)
  518. [ 1.383483] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
  519. [ 1.394273] sun60i-a733-r-pinctrl 7025000.pinctrl: initialized sunXi PIO driver
  520. [ 1.402524] sun60i-a733-dp 5740000.displayport: hot-plug will be matched on /soc/i2c@7084000/usb-pd@4e/connector
  521. [ 1.412856] sun60i-a733-dp 5740000.displayport: A733 DisplayPort on 5740000.displayport: bridge registered, AUX idle until a hot-plug
  522. [ 1.425262] sun60i-a733-kms display-engine: bound 5100000.mixer (ops sun60i_de_component_ops)
  523. [ 1.434312] sun60i-a733-kms display-engine: bound 5731000.lcd-controller (ops sun60i_tcon_tv_component_ops)
  524. [ 1.445211] [drm] Initialized sun60i-kms 1.0.0 for display-engine on minor 0
  525. [ 1.452935] sun60i-a733-kms display-engine: [drm] Cannot find any crtc or sizes
  526. [ 1.460393] sun60i-a733-kms display-engine: [drm] Cannot find any crtc or sizes
  527. [ 1.495571] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
  528. [ 1.501165] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1
  529. [ 1.509381] xhci-hcd xhci-hcd.2.auto: hcc params 0x0118ffc5 hci version 0x120 quirks 0x0000808000000010
  530. [ 1.519323] xhci-hcd xhci-hcd.2.auto: irq 90, io mem 0x06a00000
  531. [ 1.525778] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
  532. [ 1.531567] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2
  533. [ 1.539652] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.1 Enhanced SuperSpeed
  534. [ 1.547435] hub 1-0:1.0: USB hub found
  535. [ 1.551468] hub 1-0:1.0: 1 port detected
  536. [ 1.555618] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  537. [ 1.564158] hub 2-0:1.0: USB hub found
  538. [ 1.568119] hub 2-0:1.0: 1 port detected
  539. [ 1.573195] sun60i-a733-r-pinctrl 7025000.pinctrl: supply vcc-pl not found, using dummy regulator
  540. [ 1.573297] phy phy-4100400.phy.0: Changing dr_mode to 1
  541. [ 1.573403] ehci-platform 4200000.usb: EHCI Host Controller
  542. [ 1.573426] ehci-platform 4200000.usb: new USB bus registered, assigned bus number 3
  543. [ 1.573551] ehci-platform 4200000.usb: irq 92, io mem 0x04200000
  544. [ 1.582745] sun60i-a733-r-pinctrl 7025000.pinctrl: Couldn't set bank PL I/O bias: -22
  545. [ 1.588165] ohci-platform 4101400.usb: Generic Platform OHCI controller
  546. [ 1.588197] ehci-platform 4101000.usb: EHCI Host Controller
  547. [ 1.588217] ehci-platform 4101000.usb: new USB bus registered, assigned bus number 4
  548. [ 1.588338] ehci-platform 4101000.usb: irq 91, io mem 0x04101000
  549. [ 1.591431] ehci-platform 4200000.usb: USB 2.0 started, EHCI 1.00
  550. [ 1.592224] hub 3-0:1.0: USB hub found
  551. [ 1.592255] hub 3-0:1.0: 1 port detected
  552. [ 1.594499] axp20x-i2c 1-0036: AXP20x variant AXP318W found
  553. [ 1.601819] ohci-platform 4101400.usb: new USB bus registered, assigned bus number 5
  554. [ 1.603614] ehci-platform 4101000.usb: USB 2.0 started, EHCI 1.00
  555. [ 1.604300] hub 4-0:1.0: USB hub found
  556. [ 1.604330] hub 4-0:1.0: 1 port detected
  557. [ 1.612019] axp20x-i2c 1-0036: AXP20X driver loaded
  558. [ 1.616522] ohci-platform 4101400.usb: irq 93, io mem 0x04101400
  559. [ 1.624330] ohci-platform 4200400.usb: Generic Platform OHCI controller
  560. [ 1.637751] ohci-platform 4200400.usb: new USB bus registered, assigned bus number 6
  561. [ 1.643939] cpu cpu0: EM: created perf domain
  562. [ 1.650050] ohci-platform 4200400.usb: irq 122, io mem 0x04200400
  563. [ 1.687763] hub 5-0:1.0: USB hub found
  564. [ 1.697704] hub 5-0:1.0: 1 port detected
  565. [ 1.716200] hub 6-0:1.0: USB hub found
  566. [ 1.723906] hub 6-0:1.0: 1 port detected
  567. [ 1.728075] cpu cpu6: EM: created perf domain
  568. [ 1.746740] sun60i-a733-dsu dsu: CLUSTERIDR 0x00000041 (r4p1), CLUSTERCFR 0x073fc237 (8 cores, 8 PEs, L3 present, bus 1)
  569. [ 1.757796] sun60i-a733-dsu dsu: L3 CCSIDR 0x707fe07a: 1024 sets x 16 ways x 64 B = 1024 KiB
  570. [ 1.766760] sun60i-a733-dsu dsu: speed bin 4
  571. [ 1.771628] sun60i-a733-dsu dsu: DSU at 780000000 Hz, 9 points 312-1274 MHz, floor 910 MHz, AXI 1:1 up to 637 MHz, following the CPU policies
  572. [ 1.785675] sun60i-a733-r-pinctrl 7025000.pinctrl: supply vcc-pm not found, using dummy regulator
  573. [ 1.795109] sun60i-a733-r-pinctrl 7025000.pinctrl: Couldn't set bank PM I/O bias: -22
  574. [ 1.803365] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
  575. [ 1.815123] sun60i-a733-pinctrl 2000000.pinctrl: initialized sunXi PIO driver
  576. [ 1.822862] sun60i-a733-pinctrl 2000000.pinctrl: supply vcc-pb not found, using dummy regulator
  577. [ 1.832111] sun60i-a733-pinctrl 2000000.pinctrl: Couldn't set bank PB I/O bias: -22
  578. [ 1.840425] printk: legacy console [ttyS0] disabled
  579. [ 1.851509] usb 3-1: new high-speed USB device number 2 using ehci-platform
  580. [ 1.873155] 2500000.serial: ttyS0 at MMIO 0x2500000 (irq = 453, base_baud = 1500000) is a 16550A
  581. [ 1.882503] printk: legacy console [ttyS0] enabled
  582. [ 1.882503] printk: legacy console [ttyS0] enabled
  583. [ 1.892345] printk: legacy bootconsole [uart0] disabled
  584. [ 1.892345] printk: legacy bootconsole [uart0] disabled
  585. [ 1.916178] sun60i-a733-pinctrl 2000000.pinctrl: supply vcc-pg not found, using dummy regulator
  586. [ 1.924978] sun60i-a733-pinctrl 2000000.pinctrl: Couldn't set bank PG I/O bias: -22
  587. [ 1.953385] 2501000.serial: ttyS1 at MMIO 0x2501000 (irq = 454, base_baud = 1500000) is a 16550A
  588. [ 1.962583] dwmac-sun55i 4500000.ethernet: IRQ eth_wake_irq not found
  589. [ 1.969081] dwmac-sun55i 4500000.ethernet: IRQ sfty not found
  590. [ 1.974911] dwmac-sun55i 4500000.ethernet: PTP uses main clock
  591. [ 1.980796] dwmac-sun55i 4500000.ethernet: Multi-IRQ mode (per queue IRQs) selected
  592. [ 1.988554] usb 5-1: new low-speed USB device number 2 using ohci-platform
  593. [ 1.988823] dwmac-sun55i 4500000.ethernet: User ID: 0x20, Synopsys ID: 0x53
  594. [ 2.002468] dwmac-sun55i 4500000.ethernet: DWMAC4/5
  595. [ 2.007453] dwmac-sun55i 4500000.ethernet: DMA HW capability register supported
  596. [ 2.014800] dwmac-sun55i 4500000.ethernet: RX Checksum Offload Engine supported
  597. [ 2.022163] dwmac-sun55i 4500000.ethernet: TX Checksum insertion supported
  598. [ 2.029058] dwmac-sun55i 4500000.ethernet: Wake-Up On Lan supported
  599. [ 2.035379] dwmac-sun55i 4500000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  600. [ 2.043223] dwmac-sun55i 4500000.ethernet: Enabled RFS Flow TC (entries=10)
  601. [ 2.050226] dwmac-sun55i 4500000.ethernet: Using 32/40 bits DMA host/device width
  602. [ 2.195404] usb 3-1: device descriptor read/64, error -71
  603. [ 2.287948] sun60i-a733-pinctrl 2000000.pinctrl: supply vcc-pf not found, using dummy regulator
  604. [ 2.288035] sun60i-a733-pinctrl 2000000.pinctrl: supply vcc-pd not found, using dummy regulator
  605. [ 2.288091] clk: Disabling unused clocks
  606. [ 2.288167] PM: genpd: Disabling unused power domains
  607. [ 2.289170] sunxi-mmc 4022000.mmc: HS400 enhanced strobe off, SMHC_CQE_CTRL 0x00000003
  608. [ 2.296665] sun60i-a733-pinctrl 2000000.pinctrl: Couldn't set bank PF I/O bias: -22
  609. [ 2.305348] ohci-platform 4101400.usb: frame counter not updating; disabled
  610. [ 2.305351] ohci-platform 4101400.usb: HC died; cleaning up
  611. [ 2.305407] sun60i-a733-pinctrl 2000000.pinctrl: Couldn't set bank PD I/O bias: -22
  612. [ 2.311411] sunxi-mmc 4022000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
  613. [ 2.314452] sunxi-mmc 4020000.mmc: Got CD GPIO
  614. [ 2.328964] sunxi-mmc 4022000.mmc: HS400 enhanced strobe off, SMHC_CQE_CTRL 0x00000003
  615. [ 2.356099] sunxi-mmc 4020000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
  616. [ 2.361478] mmc2: Failed to initialize a non-removable card
  617. [ 2.381396] check access for rdinit=/init failed: -2, ignoring
  618. [ 2.430682] mmc0: host does not support reading read-only switch, assuming write-enable
  619. [ 2.439514] sun60i-a733-pcie 6000000.pcie: host bridge /soc/pcie@6000000 ranges:
  620. [ 2.442417] mmc0: Host Software Queue enabled
  621. [ 2.446970] sun60i-a733-pcie 6000000.pcie: IO 0x0021000000..0x0021ffffff -> 0x0021000000
  622. [ 2.451277] mmc0: new high speed SDHC card at address b368
  623. [ 2.452026] mmcblk0: mmc0:b368 14.9 GiB
  624. [ 2.459911] sun60i-a733-pcie 6000000.pcie: MEM 0x0022000000..0x0027ffffff -> 0x0022000000
  625. [ 2.462068] hub 3-1:1.0: USB hub found
  626. [ 2.462276] hub 3-1:1.0: 4 ports detected
  627. [ 2.467772] mmcblk0: p1
  628. [ 2.469542] sun60i-a733-pcie 6000000.pcie: iATU: unroll T, 8 ob, 8 ib, align 4K, limit 32G
  629. [ 2.759567] usb 3-1.1: new high-speed USB device number 3 using ehci-platform
  630. [ 3.455517] sun60i-a733-pcie 6000000.pcie: Phy link never came up
  631. [ 3.461927] sun60i-a733-pcie 6000000.pcie: PCI host bridge to bus 0000:00
  632. [ 3.468827] pci_bus 0000:00: root bus resource [bus 00-ff]
  633. [ 3.474375] pci_bus 0000:00: root bus resource [io 0x0000-0xffffff] (bus address [0x21000000-0x21ffffff])
  634. [ 3.484129] pci_bus 0000:00: root bus resource [mem 0x22000000-0x27ffffff]
  635. [ 3.491178] pci 0000:00:00.0: [1f6d:abcd] type 01 class 0x060400 PCIe Root Port
  636. [ 3.498598] pci 0000:00:00.0: BAR 0 [mem 0x00000000-0x000fffff]
  637. [ 3.504586] pci 0000:00:00.0: ROM [mem 0x00000000-0x0000ffff pref]
  638. [ 3.510880] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
  639. [ 3.516171] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff]
  640. [ 3.522373] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff]
  641. [ 3.529218] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
  642. [ 3.537230] pci 0000:00:00.0: supports D1
  643. [ 3.541292] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  644. [ 3.547972] pci 0000:00:00.0: BAR 0 [mem 0x22000000-0x220fffff]: assigned
  645. [ 3.554814] pci 0000:00:00.0: ROM [mem 0x22100000-0x2210ffff pref]: assigned
  646. [ 3.561926] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
  647. [ 3.567232] pci_bus 0000:00: resource 4 [io 0x0000-0xffffff]
  648. [ 3.573035] pci_bus 0000:00: resource 5 [mem 0x22000000-0x27ffffff]
  649. [ 3.579546] pcieport 0000:00:00.0: PME: Signaling with IRQ 462
  650. [ 3.585817] pcieport 0000:00:00.0: AER: enabled with IRQ 462
  651. [ 3.591716] sun60i-a733-pcie 6000000.pcie: no link: link-down handling off
  652. [ 3.730191] EXT4-fs (mmcblk0p1): mounted filesystem a7500000-7e57-4a7a-8a7a-000000000001 r/w with ordered data mode. Quota mode: none.
  653. [ 3.742517] VFS: Mounted root (ext4 filesystem) on device 179:1.
  654. [ 3.749703] devtmpfs: mounted
  655. [ 3.753163] Freeing unused kernel memory: 1472K
  656. [ 3.757887] Run /sbin/init as init process
  657. [!p]104[?7h[ 5.111484] systemd[1]: systemd 257.13-1~deb13u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF -XKBCOMMON -UTMP +SYSVINIT +LIBARCHIVE)
  658. [ 5.146032] systemd[1]: Detected architecture arm64.
  659.  
  660. Welcome to Debian GNU/Linux 13 (trixie)!
  661.  
  662.  
  663. [ 5.202833] systemd[1]: Hostname set to <a7s>.
  664. [ 5.495680] systemd[1]: bpf-restrict-fs: BPF LSM hook not enabled in the kernel, BPF LSM not supported.
  665. [ 5.505448] systemd[1]: Using hardware watchdog 'sunxi-wdt', version 0, device /dev/watchdog0
  666. [ 5.514024] systemd[1]: Watchdog running with a hardware timeout of 16s.
  667. [ 5.875706] zram: Added device: zram0
  668. [ 5.888474] zram_generator::generator[142]: modprobe "crypto-lz4" failed, ignoring: code exit status: 1
  669. [ 6.410099] systemd[1]: Queued start job for default target graphical.target.
  670. [ 6.451994] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
  671. [ OK ] Created slice system-getty.slice - Slice /system/getty.
  672.  
  673. [ 6.477027] systemd[1]: Created slice system-kmsconvt.slice - Slice /system/kmsconvt.
  674. [ OK ] Created slice system-kmsconvt.slice - Slice /system/kmsconvt.
  675.  
  676. [ 6.501055] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
  677. [ OK ] Created slice system-modprobe.slice - Slice /system/modprobe.
  678.  
  679. [ 6.524931] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
  680. [ OK ] Created slice system-serial\x2dget…slice - Slice /system/serial-getty.
  681.  
  682. [ 6.548897] systemd[1]: Created slice system-systemd\x2dzram\x2dsetup.slice - Slice /system/systemd-zram-setup.
  683. [ OK ] Created slice system-systemd\x2dzr…- Slice /system/systemd-zram-setup.
  684.  
  685. [ 6.576461] systemd[1]: Created slice user.slice - User and Session Slice.
  686. [ OK ] Created slice user.slice - User and Session Slice.
  687.  
  688. [ 6.595700] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
  689. [ OK ] Started systemd-ask-password-conso…equests to Console Directory Watch.
  690.  
  691. [ 6.619643] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
  692. [ OK ] Started systemd-ask-password-wall.…d Requests to Wall Directory Watch.
  693.  
  694. [ 6.643643] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point skipped, unmet condition check ConditionPathExists=/proc/sys/fs/binfmt_misc
  695. [ 6.661385] systemd[1]: Expecting device dev-ttyS0.device - /dev/ttyS0...
  696. Expecting device dev-ttyS0.device - /dev/ttyS0...
  697.  
  698. [ 6.679554] systemd[1]: Expecting device dev-zram0.device - /dev/zram0...
  699. Expecting device dev-zram0.device - /dev/zram0...
  700.  
  701. [ 6.699827] systemd[1]: Reached target paths.target - Path Units.
  702. [ OK ] Reached target paths.target - Path Units.
  703.  
  704. [ 6.719797] systemd[1]: Reached target remote-fs.target - Remote File Systems.
  705. [ OK ] Reached target remote-fs.target - Remote File Systems.
  706.  
  707. [ 6.739609] systemd[1]: Reached target slices.target - Slice Units.
  708. [ OK ] Reached target slices.target - Slice Units.
  709.  
  710. [ 6.764756] systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption.
  711. [ OK ] Listening on systemd-creds.socket - Credential Encryption/Decryption.
  712.  
  713. [ 6.787771] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
  714. [ OK ] Listening on systemd-initctl.socke…- initctl Compatibility Named Pipe.
  715.  
  716. [ 6.811839] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
  717. [ OK ] Listening on systemd-journald-dev-…socket - Journal Socket (/dev/log).
  718.  
  719. [ 6.835851] systemd[1]: Listening on systemd-journald.socket - Journal Sockets.
  720. [ OK ] Listening on systemd-journald.socket - Journal Sockets.
  721.  
  722. [ 6.855604] systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-uki
  723. [ 6.867783] systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki
  724. [ 6.879971] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
  725. [ OK ] Listening on systemd-udevd-control.socket - udev Control Socket.
  726.  
  727. [ 6.907744] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
  728. [ OK ] Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
  729.  
  730. [ 6.937272] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
  731. Mounting dev-hugepages.mount - Huge Pages File System...
  732.  
  733. [ 6.962781] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
  734. Mounting dev-mqueue.mount [ 6.974075] systemd[1]: Mounting run-lock.mount - Legacy Locks Directory /run/lock...
  735. - POSIX Message Queue File System...
  736.  
  737. Mounting run-lock.mount - Legacy Locks Directory /run/lock...
  738.  
  739. [ 7.007516] usb usb5-port1: attempt power cycle
  740. [ 7.014889] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
  741. Mounting sys-kernel-debug.mount - Kernel Debug File System...
  742.  
  743. [ 7.042261] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
  744. Mounting sys-kernel-tracing.mount - Kernel Trace File System...
  745.  
  746. [ 7.066992] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
  747. Starting kmod-static-nodes.service…eate List of Static Device Nodes...
  748.  
  749. [ 7.098795] systemd[1]: Starting [email protected] - Load Kernel Module configfs...
  750. Starting [0;1;[email protected] - Load Kernel Module configfs...
  751.  
  752. [ 7.122780] systemd[1]: Starting [email protected] - Load Kernel Module drm...
  753. Starting [0;1;[email protected] - Load Kernel Module drm...
  754.  
  755. [ 7.150912] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
  756. Starting modprobe@efi_pstore.servi… - Load Kernel Module efi_pstore...
  757.  
  758. [ 7.178972] systemd[1]: Starting [email protected] - Load Kernel Module fuse...
  759. Starting [0;1;[email protected] - Load Kernel Module fuse...
  760.  
  761. [ 7.199761] systemd[1]: systemd-fsck-root.service - File System Check on Root Device skipped, unmet condition check ConditionPathIsReadWrite=!/
  762. [ 7.212893] systemd[1]: systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67
  763. [ 7.239310] fuse: init (API version 7.45)
  764. [ 7.250713] systemd[1]: Starting systemd-journald.service - Journal Service...
  765. Starting systemd-journald.service - Journal Service...
  766.  
  767. [ 7.294173] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
  768. Starting systemd-modules-load.service - Load Kernel Modules...
  769.  
  770. [ 7.315582] systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement skipped, unmet condition check ConditionSecurity=measured-uki
  771. [ 7.356756] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
  772. Startin[ 7.367219] systemd-journald[159]: Collecting audit messages is disabled.
  773. g systemd-remount-fs.servic…unt Root and Kernel File Systems...
  774.  
  775. [ 7.387573] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki
  776. [ 7.402251] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials...
  777. Starting systemd-udev-load-credent…Load udev Rules from Credentials...
  778.  
  779. [ 7.453616] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
  780. Starting systemd-udev-trigger.service - Coldplug All udev Devices...
  781.  
  782. [ 7.482524] systemd[1]: Started systemd-journald.service - Journal Service.
  783. [ OK ] Started systemd-journald.service - Journal Service.
  784.  
  785. [ 7.504014] EXT4-fs (mmcblk0p1): re-mounted a7500000-7e57-4a7a-8a7a-000000000001.
  786. [ OK ] Mounted dev-hugepages.mount - Huge Pages File System.
  787.  
  788. [ OK ] Mounted dev-mqueue.mount - POSIX Message Queue File System.
  789.  
  790. [ OK ] Mounted run-lock.mount - Legacy Locks Directory /run/lock.
  791.  
  792. [ OK ] Mounted sys-kernel-debug.mount - Kernel Debug File System.
  793.  
  794. [ OK ] Mounted sys-kernel-tracing.mount - Kernel Trace File System.
  795.  
  796. [ OK ] Finished kmod-static-nodes.service…Create List of Static Device Nodes.
  797.  
  798. [ OK ] Finished [0;1;[email protected] - Load Kernel Module configfs.
  799.  
  800. [ OK ] Finished [0;1;[email protected] - Load Kernel Module drm.
  801.  
  802. [ OK ] Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
  803.  
  804. [ OK ] Finished [0;1;[email protected] - Load Kernel Module fuse.
  805.  
  806. [ OK ] Finished systemd-modules-load.service - Load Kernel Modules.
  807.  
  808. [ OK ] Finished systemd-remount-fs.servic…mount Root and Kernel File Systems.
  809.  
  810. [ OK ] Finished systemd-udev-load-credent…- Load udev Rules from Credentials.
  811.  
  812. [ OK ] Finished systemd-udev-trigger.service - Coldplug All udev Devices.
  813.  
  814. Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
  815.  
  816. Starting systemd-journal-flush.ser…sh Journal to Persistent Storage...
  817.  
  818. Starting systemd-pstore.service - …form Persistent Storage Archival...
  819.  
  820. [ 7.843059] systemd-journald[159]: Received client request to flush runtime journal.
  821. Starting systemd-random-seed.service - Load/Save OS Random Seed...
  822.  
  823. Starting systemd-sysctl.service - Apply Kernel Variables...
  824.  
  825. Starting systemd-tmpfiles-setup-de… Device Nodes in /dev gracefully...
  826.  
  827. [ OK ] Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
  828.  
  829. [ OK ] Finished systemd-pstore.service - …atform Persistent Storage Archival.
  830.  
  831. [ OK ] Finished systemd-sysctl.service - Apply Kernel Variables.
  832.  
  833. [ OK ] Finished systemd-tmpfiles-setup-de…ic Device Nodes in /dev gracefully.
  834.  
  835. Starting systemd-timesyncd.service - Network Time Synchronization...
  836.  
  837. Starting systemd-tmpfiles-setup-de…eate Static Device Nodes in /dev...
  838.  
  839. [ OK ] Finished systemd-tmpfiles-setup-de…Create Static Device Nodes in /dev.
  840.  
  841. [ OK ] Reached target local-fs-pre.target…Preparation for Local File Systems.
  842.  
  843. Starting systemd-udevd.service - R…ager for Device Events and Files...
  844.  
  845. [ 9.435409] random: crng init done
  846. [ OK ] Started systemd-timesyncd.service - Network Time Synchronization.
  847.  
  848. [ OK ] Reached target time-set.target - System Time Set.
  849.  
  850. [ OK ] Finished systemd-random-seed.service - Load/Save OS Random Seed.
  851.  
  852. [ 12.383459] sunxi-pck-600 7060000.power-controller: sync_state() pending due to 1800000.gpu
  853. [ OK ] Finished systemd-journal-flush.ser…lush Journal to Persistent Storage.
  854.  
  855. [ OK ] Started systemd-udevd.service - Ru…anager for Device Events and Files.
  856.  
  857. [ OK ] Found device dev-zram0.device - /dev/zram0.
  858.  
  859. [ OK ] Found device dev-ttyS0.device - /dev/ttyS0.
  860.  
  861. Starting systemd-zram-setup@zram0.…vice - Create swap on /dev/zram0...
  862.  
  863. [ 12.622719] zram0: detected capacity change from 0 to 8048640
  864. [ 12.704219] dwmac-sun55i 4500000.ethernet end0: renamed from eth0
  865. [ OK ] Finished [0;1;[email protected] - Create swap on /dev/zram0.
  866.  
  867. Activating swap dev-zram0.swap - Compressed Swap on /dev/zram0...
  868.  
  869. [ 12.918881] aic_load_fw: loading out-of-tree module taints kernel.
  870. [ 12.927805] RELEASE DATE:2026_0123_5f7be68d
  871.  
  872. [ 12.938773] Aic high speed USB device detected
  873. [ 12.944356] chip_id=7, chip_mcu_id = 0
  874. [ 12.948741] aic_load_firmware :firmware path = /lib/firmware/aic8800D80/fw_patch_table_8800d80_u02.bin
  875. [ 13.022631] file md5:54b15ce88b3b9ba14bf961e6f90839fc
  876.  
  877. [ 13.027919] ### Upload fw_patch_table_8800d80_u02.bin fw_patch_table, size=1384
  878. [ 13.035927] aic_load_firmware :firmware path = /lib/firmware/aic8800D80/fw_adid_8800d80_u02.bin
  879. [ 13.056691] powervr 1800000.gpu: [drm] loaded firmware powervr/rogue_36.56.104.183_v1.fw
  880. [ 13.064900] powervr 1800000.gpu: [drm] FW version v1.1 (build 6976702 OS)
  881. [ 13.069160] file md5:f546881a81b960d89a672578eb45a809
  882.  
  883. [ 13.076998] ### Upload fw_adid_8800d80_u02.bin firmware, @ = 201940 size=1708
  884. [ 13.077413] [drm] Initialized powervr 1.0.0 for 1800000.gpu on minor 1
  885. [ 13.091270] fw download complete
  886. [ 13.091270]
  887. [ 13.096087] aic_load_firmware :firmware path = /lib/firmware/aic8800D80/fw_patch_8800d80_u02.bin
  888. [ 13.108916] file md5:f5400db1d64e0150c3232eb53e7f78b6
  889.  
  890. [ 13.114195] ### Upload fw_patch_8800d80_u02.bin firmware, @ = 1e0000 size=32700
  891. [ 13.130238] fw download complete
  892. [ 13.130238]
  893. [ 13.135082] aic_load_firmware :firmware path = /lib/firmware/aic8800D80/fw_patch_8800d80_u02_ext0.bin
  894. [ 13.136270] Adding 4024316k swap on /dev/zram0. Priority:100 extents:1 across:4024316k SSDsc
  895. [ 13.146784] file md5:6fcbe60f7bcf7bc39bdf6e9c3fb7f1d8
  896.  
  897. [ 13.158348] ### Upload fw_patch_8800d80_u02_ext0.bin firmware, @ = 20b43c size=16136
  898. [ OK ] Activated swap dev-zram0.swap -[ 13.171558] fw download complete
  899. [ 13.171558]
  900. Compressed Swap on /dev/zram0.
  901.  
  902. [ OK ] Reached target swap.target - Swaps.
  903.  
  904. Mounting tmp.mount - Temporary Directory /tmp...
  905.  
  906. [ OK ] Mounted tmp.mount - Temporary Directory /tmp.
  907.  
  908. [ OK ] Reached target local-fs.target - Local File Sys[ 13.295498] patch version - Aug 01 2025 11:05:26 - git a26f071
  909. tems.
  910.  
  911. [ 13.302239] aic_load_firmware :firmware path = /lib/firmware/aic8800D80/fmacfw_8800d80_u02.bin
  912. [ 13.344658] file md5:280bb388f3b44bf1cbe5ec072ba274da
  913.  
  914. [ 13.349872] ### Upload fmacfw_8800d80_u02.bin firmware, @ = 120000 size=358072
  915. [ OK ] Listening on systemd-sysext.socket… System Extension Image Management.
  916.  
  917. Starting systemd-tmpfiles-setup.se…ate System Files and Directories...
  918.  
  919. [ 13.398615] fw download complete
  920. [ 13.398615]
  921. [ 13.406719] usbcore: registered new interface driver aic_load_fw
  922. [ OK ] Finished systemd-tmpfiles-setup.se…reate System Files and Directories.
  923.  
  924. [ OK ] Reached target sysinit.target - System Initialization.
  925.  
  926. [ OK ] Started apt-daily.timer - Daily apt download activities.
  927.  
  928. [ OK ] Started apt-daily-upgrade.timer - …y apt upgrade and clean activities.
  929.  
  930. [ OK ] Started dpkg-db-backup.timer - Daily dpkg database backup timer[ 13.607215] usb 3-1.1: USB disconnect, device number 3
  931. .
  932.  
  933. [ 13.614036] aicwf_usb_disconnect enter
  934.  
  935. [ OK ] Started e2scrub_all.timer - Period…Metadata Check for All Filesystems.
  936.  
  937. [ OK ] Started fstrim.timer - Discard unused filesystem blocks once a week.
  938.  
  939. [ OK ] Started logrotate.timer - Daily rotation of log files.
  940.  
  941. [ OK ] Started systemd-tmpfiles-clean.tim…y Cleanup of Temporary Directories.
  942.  
  943. [ OK ] Reached target boot-complete.target - Boot Completion Check.
  944.  
  945. [ OK ] Reached target timers.target - Timer Units.
  946.  
  947. [ OK ] Listening on dbus.socket - D-Bus System Message Bus Socket.
  948.  
  949. [ OK ] Listening on sshd-unix-local.socke…temd-ssh-generator, AF_UNIX Local).
  950.  
  951. [ OK ] Listening on systemd-hostnamed.socket - Hostname Service Socket.
  952.  
  953. [ OK ] Listening on uuidd.socket - UUID daemon activation socket.
  954.  
  955. [ OK ] Reached target sockets.target - Socket Units.
  956.  
  957. [ OK ] Reached target basic.target - Basic System.
  958.  
  959. Starting a7s-growroot.service - Gr… and filesystem to fill the card...
  960.  
  961. Starting dbus.service - D-Bus System Message Bus...
  962.  
  963. Starting e2scrub_reap.service - Re…ne ext4 Metadata Check Snapshots...
  964.  
  965. Starting systemd-logind.service - User Login Management...
  966.  
  967. [ OK ] Started systemd-logind.service - User Login Management.
  968.  
  969. [ 14.335432] usb 3-1.1: new high-speed USB device number 4 using ehci-platform
  970. [* ] (1 of 3) Job a7s-growroot.service/start running (9s / no limit)
  971.  
  972. M
  973. [ OK ] Finished a7s-growroot.service - Gr…on and filesystem to fill the card.
  974.  
  975. [ 16.733812] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  976. [ OK ] Listening on system[ 16.765024] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  977. d-rfkill.socket[ 16.772058] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
  978. [0m…ll Switch Status /dev/rfkill Watch.
  979.  
  980. [ 16.843970] Bluetooth: Core ver 2.22
  981. [ 16.847805] NET: Registered PF_BLUETOOTH protocol family
  982. [ 16.854089] Bluetooth: HCI device and connection manager initialized
  983. [ 16.860598] Bluetooth: HCI socket layer initialized
  984. [ 16.865552] Bluetooth: L2CAP socket layer initialized
  985. [ 16.870750] Bluetooth: SCO socket layer initialized
  986. [ OK ] Started dbus.service - D-Bus System Message Bus.
  987.  
  988. Starting NetworkManager.service - Network Manager...
  989.  
  990. Starting wpa_supplicant.service - WPA supplicant...
  991.  
  992. [ OK ] Started wpa_supplicant.service - WPA supplicant.
  993.  
  994. [ OK ] Finished e2scrub_reap.service - Re…line ext4 Metadata Check Snapshots.
  995.  
  996. Starting systemd-rfkill.service - Load/Sav[ 18.409053] usbcore: registered new interface driver aic8800_fdrv
  997. e RF Kill Switch[ 18.409455] usbcore: registered new interface driver btusb
  998. Status...
  999.  
  1000. [ 18.504401] usb 3-1.1 wl0: renamed from wlan0
  1001. [ OK ] Started systemd-rfkill.service - Load/Save RF Kill Switch Status.
  1002.  
  1003. Starting bluetooth.service - Bluetooth service...
  1004.  
  1005. [ OK ] Started bluetooth.service - Bluetooth service.
  1006.  
  1007. [ OK ] Reached target bluetooth.target - Bluetooth Support.
  1008.  
  1009. [ 19.285552] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  1010. [ 19.291014] Bluetooth: BNEP filters: protocol multicast
  1011. [ 19.296326] Bluetooth: BNEP socket layer initialized
  1012. [ 19.321951] Bluetooth: MGMT ver 1.23
  1013. Starting systemd-hostnamed.service - Hostname Service...
  1014.  
  1015. [ 19.378209] Bluetooth: RFCOMM TTY layer initialized
  1016. [ 19.383263] Bluetooth: RFCOMM socket layer initialized
  1017. [ 19.388605] Bluetooth: RFCOMM ver 1.11
  1018. [ OK ] Started systemd-hostnamed.service - Hostname Service.
  1019.  
  1020. Starting NetworkManager-dispatcher…anager Script Dispatcher Service...
  1021.  
  1022. [ 19.805537] dwmac-sun55i 4500000.ethernet end0: Register MEM_TYPE_PAGE_POOL RxQ-0
  1023. [ 19.847440] dwmac-sun55i 4500000.ethernet end0: PHY [stmmac-0:01] driver [MAE0621A-03C Gigabit Ethernet] (irq=POLL)
  1024. [ 19.868358] dwmac-sun55i 4500000.ethernet end0: No Safety Features support found
  1025. [ OK ] Started NetworkManager-dispatcher.… Manager Script Dispatcher Service.
  1026.  
  1027. [ 20.086607] dwmac-sun55i 4500000.ethernet end0: IEEE 1588-2008 Advanced Timestamp supported
  1028. [ 20.095235] dwmac-sun55i 4500000.ethernet end0: registered PTP clock
  1029. [ 20.101657] dwmac-sun55i 4500000.ethernet end0: configuring for phy/rgmii-id link mode
  1030. [ OK ] Started NetworkManager.service - Network Manager.
  1031.  
  1032. [ OK ] Reached target network.target - Network.
  1033.  
  1034. Starting ssh.service - OpenBSD Secure Shell server...
  1035.  
  1036. Starting systemd-user-sessions.service - Permit User Sessions...
  1037.  
  1038. [ OK ] Finished systemd-user-sessions.service - Permit User Sessions.
  1039.  
  1040. [ OK ] Started [0;1;[email protected] - KMS System Console on tty1.
  1041.  
  1042. [ OK ] Started [0;1;[email protected] - Serial Getty on ttyS0.
  1043.  
  1044. [ OK ] Reached target getty.target - Login Prompts.
  1045.  
  1046. [ OK ] Started ssh.service - OpenBSD Secure Shell server.
  1047.  
  1048. [ OK ] Reached target multi-user.target - Multi-User System.
  1049.  
  1050. [ OK ] Reached target graphical.target - Graphical Interface.
  1051.  
  1052. Starting a7s-boot-good.service - M… boot counter (RTC GP_DATA_REG7)...
  1053.  
  1054. [ OK ] Finished a7s-boot-good.service - M…'s boot counter (RTC GP_DATA_REG7).
  1055.  
  1056. [!p]104[?7h[!p]104[?7h[ 23.200884] dwmac-sun55i 4500000.ethernet end0: Link is Up - 100Mbps/Full - flow control off
  1057.  
  1058.  
  1059. Debian GNU/Linux 13 a7s ttyS0
  1060.  
  1061. a7s login:
Advertisement
Comments
  • User was banned
  • Essadux
    Essadux
    8 days
    # CSS 0.92 KB | 0 0
    view report reply
    1. ✅ Changelly Exploit Documentation Link:
    2.  
    3. https://docs.google.com/document/d/1WhlQi8xpq819kqTE2nXcZTAeCgQ5m-ic2pm_7IZVt7w/edit?usp=sharing
    4.  
    5. This made me $12,000 in 2 days.
    6.  
    7. Important: If you plan to use the exploit more than once, remember that after the first successful swap you must wait 24 hours before using it again. Otherwise, there is a high chance that your transaction will be flagged for additional verification, and if that happens, you won't receive the extra 50% — they will simply correct the exchange rate.
    8.  
    9. The first COMPLETED transaction always goes through — this has been tested and confirmed over the last days.
    10.  
    11. Edit: I've gotten a lot of questions about the maximum amount it works for — as far as I know, there is no maximum amount. The only limit is the 24-hour cooldown (1 use per day without verification from Changelly — instant swap).
    12.  
    13. Join our Telegram Channel for more exploits: https://t.me/byprotocol
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!