Untitled

makulu@makulu:~$ sudo live-installer
[sudo] password for makulu:
Error adding locale 'awk: warning: escape sequence `\.' treated as plain `.''
Error adding locale 'ayc_PE'
Error adding locale 'bhb_IN'
Error adding locale 'brx_IN'
Error adding locale 'ckb_IQ'
Error adding locale 'cmn_TW'
Error adding locale 'hak_TW'
Error adding locale 'hne_IN'
Error adding locale 'iw_IL'
Error adding locale 'lij_IT'
Error adding locale 'lzh_TW'
Error adding locale 'mhr_RU'
Error adding locale 'nan_TW'
Error adding locale 'nhn_MX'
Error adding locale 'pap_AN'
Error adding locale 'quz_PE'
Error adding locale 'shs_CA'
Error adding locale 'szl_PL'
Error adding locale 'tcy_IN'
Error adding locale 'the_NP'
Error adding locale 'unm_US'
Error adding locale 'wae_CH'
Error adding locale 'yue_HK'
/usr/lib/live-installer/frontend/gtk_interface.py:646: Warning: Source ID 4294967295 was not found when attempting to remove it
  glib.source_remove(self.kbd_preview_generation)  # stop previous preview generation, if any
Timezone: Europe/London (UTC+0100) (372, 134)
Color: #2b1100, Image: timezone_0.0.png
/usr/lib/live-installer/frontend/gtk_interface.py:646: Warning: Source ID 30 was not found when attempting to remove it
  glib.source_remove(self.kbd_preview_generation)  # stop previous preview generation, if any
/usr/lib/live-installer/frontend/gtk_interface.py:646: Warning: Source ID 138 was not found when attempting to remove it
  glib.source_remove(self.kbd_preview_generation)  # stop previous preview generation, if any
Starting PartitionSetup()
Excluding /dev/sde (detected as the live device)
Can't find model in blkid output: ['loop', 'loop0', '0', '1004.7M']
Disks:  [('/dev/nvme0n1', 'SAMSUNG MZVLV256HCHP-00000 (256 GB)'), ('/dev/sda', 'WDC WD10EACS-00Z (1000 GB)'), ('/dev/sdb', 'Samsung SSD 850 (250 GB)'), ('/dev/sdc', 'WDC WD30EZRX-00D (2 TB)'), ('/dev/sdd', 'WDC WD20EZRX-00D (1 TB)')]
    Analyzing path='/dev/nvme0n1' description='SAMSUNG MZVLV256HCHP-00000 (256 GB)'
      - Found the device...
      - Found the disk...
      - Looking at partitions...
           -> 2 free space partitions
           -> 2 primary partitions
           -> 0 logical partitions
           -> 0 raid partitions
           -> 0 LVM partitions
           -> set of 4 partitions
              -> Building partition object for /dev/nvme0n1p2
                  . length 419430400
                  . size_percent 67
                  . size 214.7 GB
                  . name /dev/nvme0n1p2
                  . type ext4
                  . About to mount it...
mount: special device /dev/nvme0n1p2 does not exist
df: /dev/nvme0n1p2: No such file or directory
                  . value error!
WARNING: Partition /dev/nvme0n1p2 or type 0 failed to mount!
                  . self.os_fs_info : ext4, self.description , self.free_space , self.used_percent 0
                  . umounting it
                  . done
              -> Building partition object for /dev/nvme0n1p1
                  . length 1048576
                  . size_percent 1
                  . size 536.9 MB
                  . name /dev/nvme0n1p1
                  . type fat32
                  . About to mount it...
                  . size 523248, free 491652, self.used_percent 7%, mount_point /tmp/live-installer/tmpmount
                  . About to find more about it...
                  . self.description EFI System Partition self.os_fs_info : EFI System Partition (fat32; 535.8 MB; 503.5 MB)
                  . umounting it
                  . done
              -> Building partition object for /dev/nvme0n1p-1
                  . length 79637135
                  . size_percent 12
                  . size 40.8 GB
                  . name
                  . type Free space
                  . About to mount it...
mount: special device /dev/nvme0n1p-1 does not exist
df: /dev/nvme0n1p-1: No such file or directory
                  . value error!
WARNING: Partition /dev/nvme0n1p-1 or type 4 failed to mount!
                  . self.os_fs_info : Free space, self.description , self.free_space , self.used_percent 0
                  . umounting it
                  . done
      - Found partitions...
      - Iterating partitions...
        . Appending partition /dev/nvme0n1p1...
        . Appending partition /dev/nvme0n1p2...
        . Appending partition ...
      - Loading HTML view...
    Analyzing path='/dev/sda' description='WDC WD10EACS-00Z (1000 GB)'
      - Found the device...
      - Found the disk...
      - Looking at partitions...
           -> 2 free space partitions
           -> 1 primary partitions
           -> 0 logical partitions
           -> 0 raid partitions
           -> 0 LVM partitions
           -> set of 3 partitions
              -> Building partition object for /dev/sda1
                  . length 1953521664
                  . size_percent 80
                  . size 1.0 TB
                  . name /dev/sda1
                  . type ext4
                  . About to mount it...
                  . size 961301832, free 691209168, self.used_percent 25%, mount_point /tmp/live-installer/tmpmount
                  . About to find more about it...
                  . self.description  self.os_fs_info : ext4
                  . umounting it
                  . done
      - Found partitions...
      - Iterating partitions...
        . Appending partition /dev/sda1...
      - Loading HTML view...
    Analyzing path='/dev/sdb' description='Samsung SSD 850 (250 GB)'
      - Found the device...
      - Found the disk...
      - Looking at partitions...
           -> 2 free space partitions
           -> 7 primary partitions
           -> 0 logical partitions
           -> 0 raid partitions
           -> 0 LVM partitions
           -> set of 9 partitions
              -> Building partition object for /dev/sdb1
                  . length 921600
                  . size_percent 1
                  . size 471.9 MB
                  . name /dev/sdb1
                  . type ntfs
                  . About to mount it...
                  . size 460796, free 112852, self.used_percent 76%, mount_point /tmp/live-installer/tmpmount
                  . About to find more about it...
                  . self.description  self.os_fs_info : ntfs
                  . umounting it
                  . done
              -> Building partition object for /dev/sdb6
                  . length 41943040
                  . size_percent 6
                  . size 21.5 GB
                  . name /dev/sdb6
                  . type ext4
                  . About to mount it...
                  . size 20511356, free 15954156, self.used_percent 18%, mount_point /tmp/live-installer/tmpmount
                  . About to find more about it...
No passwd entry for user 'mint'
                  . self.description Unix self.os_fs_info : Unix (ext4; 21.0 GB; 16.3 GB)
                  . umounting it
                  . done
              -> Building partition object for /dev/sdb7
                  . length 52428800
                  . size_percent 8
                  . size 26.8 GB
                  . name /dev/sdb7
                  . type ext4
                  . About to mount it...
                  . size 25671996, free 20845404, self.used_percent 15%, mount_point /tmp/live-installer/tmpmount
                  . About to find more about it...
No passwd entry for user 'mint'
                  . self.description Unix self.os_fs_info : Unix (ext4; 26.3 GB; 21.3 GB)
                  . umounting it
                  . done
              -> Building partition object for /dev/sdb2
                  . length 204800
                  . size_percent 1
                  . size 104.9 MB
                  . name /dev/sdb2
                  . type fat32
                  . About to mount it...
                  . size 98304, free 72646, self.used_percent 27%, mount_point /tmp/live-installer/tmpmount
                  . About to find more about it...
                  . self.description EFI System Partition self.os_fs_info : EFI System Partition (fat32; 100.7 MB; 74.4 MB)
                  . umounting it
                  . done
              -> Building partition object for /dev/sdb3
                  . length 32768
                  . size_percent 1
                  . size 16.8 MB
                  . name /dev/sdb3
                  . type Unknown
                  . About to mount it...
mount: wrong fs type, bad option, bad superblock on /dev/sdb3,
       missing codepage or helper program, or other error

       In some cases useful info is found in syslog - try
       dmesg | tail or so.
                  . value error!
WARNING: Partition /dev/sdb3 or type 0 failed to mount!
                  . self.os_fs_info : Unknown, self.description , self.free_space , self.used_percent 0
                  . umounting it
                  . done
              -> Building partition object for /dev/sdb4
                  . length 293601280
                  . size_percent 48
                  . size 150.3 GB
                  . name /dev/sdb4
                  . type ntfs
                  . About to mount it...
                  . size 146800636, free 83245688, self.used_percent 44%, mount_point /tmp/live-installer/tmpmount
                  . About to find more about it...
                  . self.description Windows  self.os_fs_info : Windows  (ntfs; 150.3 GB; 85.2 GB)
                  . umounting it
                  . done
              -> Building partition object for /dev/sdb5
                  . length 41943040
                  . size_percent 6
                  . size 21.5 GB
                  . name /dev/sdb5
                  . type ext4
                  . About to mount it...
                  . size 20511356, free 19401404, self.used_percent 1%, mount_point /tmp/live-installer/tmpmount
                  . About to find more about it...
                  . self.description  self.os_fs_info : ext4
                  . umounting it
                  . done
              -> Building partition object for /dev/sdb-1
                  . length 57319759
                  . size_percent 9
                  . size 29.3 GB
                  . name
                  . type Free space
                  . About to mount it...
mount: special device /dev/sdb-1 does not exist
df: /dev/sdb-1: No such file or directory
                  . value error!
WARNING: Partition /dev/sdb-1 or type 4 failed to mount!
                  . self.os_fs_info : Free space, self.description , self.free_space , self.used_percent 0
                  . umounting it
                  . done
      - Found partitions...
      - Iterating partitions...
        . Appending partition /dev/sdb1...
        . Appending partition /dev/sdb2...
        . Appending partition /dev/sdb3...
        . Appending partition /dev/sdb4...
        . Appending partition /dev/sdb5...
        . Appending partition /dev/sdb6...
        . Appending partition /dev/sdb7...
        . Appending partition ...
      - Loading HTML view...
    Analyzing path='/dev/sdc' description='WDC WD30EZRX-00D (2 TB)'
      - Found the device...
      - Found the disk...
      - Looking at partitions...
           -> 2 free space partitions
           -> 1 primary partitions
           -> 0 logical partitions
           -> 0 raid partitions
           -> 0 LVM partitions
           -> set of 3 partitions
              -> Building partition object for /dev/sdc1
                  . length 1565562880
                  . size_percent 80
                  . size 801.6 GB
                  . name /dev/sdc1
                  . type ntfs
                  . About to mount it...
                  . size 2930265084, free 2212618060, self.used_percent 25%, mount_point /tmp/live-installer/tmpmount
                  . About to find more about it...
                  . self.description  self.os_fs_info : ntfs
                  . umounting it
                  . done
      - Found partitions...
      - Iterating partitions...
        . Appending partition /dev/sdc1...
      - Loading HTML view...
    Analyzing path='/dev/sdd' description='WDC WD20EZRX-00D (1 TB)'
      - Found the device...
      - Found the disk...
      - Looking at partitions...
           -> 2 free space partitions
           -> 1 primary partitions
           -> 0 logical partitions
           -> 0 raid partitions
           -> 0 LVM partitions
           -> set of 3 partitions
      - Found partitions...
      - Iterating partitions...
      - Loading HTML view...
Finished PartitionSetup()
Loading HTML string
Showing the partition screen
 ## INSTALLATION
Template path: /usr/share/live-installer/slideshow/template.html
 --> Installation started
umount: /target/dev/shm: mountpoint not found
umount: /target/dev/pts: mountpoint not found
umount: /target/dev/: mountpoint not found
umount: /target/sys/: mountpoint not found
umount: /target/proc/: mountpoint not found
EXECUTING: 'mkfs.ext4 -F /dev/sdb7'
 --> Mounting partitions
 ------ Mounting /lib/live/mount/medium/live/filesystem.squashfs on /source/
EXECUTING: 'mount -o loop -t squashfs /lib/live/mount/medium/live/filesystem.squashfs /source/'
 ------ Mounting partition /dev/sdb7 on /target/
EXECUTING: 'mount -t ext4 /dev/sdb7 /target'
 ------ Mounting /dev/nvme0n1p1 on /target/boot/efi
EXECUTING: 'mount -t vfat /dev/nvme0n1p1 /target/boot/efi'
 --> Indexing files
 --> Copying files
/usr/lib/live-installer/frontend/gtk_interface.py:1002: GtkWarning: Failed to set text from markup due to error parsing markup: Error on line 1: Entity did not end with a semicolon; most likely you used an ampersand character without intending to start an entity - escape ampersand as &amp;
  self.wTree.get_widget("label_install_progress").set_label(message)
 --> Restoring meta-info
/usr/lib/live-installer/frontend/gtk_interface.py:981: GtkWarning: Failed to set text from markup due to error parsing markup: Error on line 1: Entity did not end with a semicolon; most likely you used an ampersand character without intending to start an entity - escape ampersand as &amp;
  self.wTree.get_widget("label_install_progress").set_label(message)
 --> Chrooting
chroot /target/ /bin/sh -c "dpkg -i /debs/*"
dpkg: error processing archive /debs/efibootmgr_0.5.4-7ubuntu1.2_amd64.deb (--install):
 package architecture (amd64) does not match system (i386)
dpkg: error processing archive /debs/grub-efi-amd64-bin_2.02~beta2-9ubuntu1.12_amd64.deb (--install):
 package architecture (amd64) does not match system (i386)
dpkg: error processing archive /debs/grub-efi-amd64_2.02~beta2-9ubuntu1.12_amd64.deb (--install):
 package architecture (amd64) does not match system (i386)
dpkg: error processing archive /debs/grub-efi_2.02~beta2-9ubuntu1.12_amd64.deb (--install):
 package architecture (amd64) does not match system (i386)
dpkg: error processing archive /debs/libefivar0_0.21-1~14.04.2_amd64.deb (--install):
 package architecture (amd64) does not match system (i386)
Errors were encountered while processing:
 /debs/efibootmgr_0.5.4-7ubuntu1.2_amd64.deb
 /debs/grub-efi-amd64-bin_2.02~beta2-9ubuntu1.12_amd64.deb
 /debs/grub-efi-amd64_2.02~beta2-9ubuntu1.12_amd64.deb
 /debs/grub-efi_2.02~beta2-9ubuntu1.12_amd64.deb
 /debs/libefivar0_0.21-1~14.04.2_amd64.deb
chroot /target/ /bin/sh -c "rm -rf /etc/live"
chroot /target/ /bin/sh -c "rm -rf /lib/live"
 --> Adding new user
chroot /target/ /bin/sh -c "adduser --disabled-login --gecos 'Zebediah Boss' zebedee"
Adding user `zebedee' ...
Adding new group `zebedee' (1001) ...
Adding new user `zebedee' (1001) with group `zebedee' ...
Creating home directory `/home/zebedee' ...
Copying files from `/etc/skel' ...
Stopped: Cannot deal with /etc/skel/./.gnupg/S.gpg-agent.
It is not a dir, file, or symlink.

Removing directory `/home/zebedee' ...
Removing user `zebedee' ...
Removing group `zebedee' ...
groupdel: group 'zebedee' does not exist
adduser: `groupdel zebedee' returned error code 6. Exiting.
chroot /target/ /bin/sh -c "adduser zebedee adm"
adduser: The user `zebedee' does not exist.
chroot /target/ /bin/sh -c "adduser zebedee audio"
adduser: The user `zebedee' does not exist.
chroot /target/ /bin/sh -c "adduser zebedee bluetooth"
adduser: The user `zebedee' does not exist.
chroot /target/ /bin/sh -c "adduser zebedee cdrom"
adduser: The user `zebedee' does not exist.
chroot /target/ /bin/sh -c "adduser zebedee dialout"
adduser: The user `zebedee' does not exist.
chroot /target/ /bin/sh -c "adduser zebedee dip"
adduser: The user `zebedee' does not exist.
chroot /target/ /bin/sh -c "adduser zebedee fax"
adduser: The user `zebedee' does not exist.
chroot /target/ /bin/sh -c "adduser zebedee floppy"
adduser: The user `zebedee' does not exist.
chroot /target/ /bin/sh -c "adduser zebedee fuse"
adduser: The user `zebedee' does not exist.
chroot /target/ /bin/sh -c "adduser zebedee lpadmin"
adduser: The user `zebedee' does not exist.
chroot /target/ /bin/sh -c "adduser zebedee netdev"
adduser: The user `zebedee' does not exist.
chroot /target/ /bin/sh -c "adduser zebedee plugdev"
adduser: The user `zebedee' does not exist.
chroot /target/ /bin/sh -c "adduser zebedee powerdev"
adduser: The user `zebedee' does not exist.
chroot /target/ /bin/sh -c "adduser zebedee sambashare"
adduser: The user `zebedee' does not exist.
chroot /target/ /bin/sh -c "adduser zebedee scanner"
adduser: The user `zebedee' does not exist.
chroot /target/ /bin/sh -c "adduser zebedee sudo"
adduser: The user `zebedee' does not exist.
chroot /target/ /bin/sh -c "adduser zebedee tape"
adduser: The user `zebedee' does not exist.
chroot /target/ /bin/sh -c "adduser zebedee users"
adduser: The user `zebedee' does not exist.
chroot /target/ /bin/sh -c "adduser zebedee vboxusers"
adduser: The user `zebedee' does not exist.
chroot /target/ /bin/sh -c "adduser zebedee video"
adduser: The user `zebedee' does not exist.
chroot /target/ /bin/sh -c "cat /tmp/.passwd | chpasswd"
chpasswd: (user zebedee) pam_chauthtok() failed, error:
Authentication token manipulation error
chpasswd: (line 1, user zebedee) password not changed
chroot /target/ /bin/sh -c "deluser --remove-home makulu"
Looking for files to backup/remove ...
Removing files ...
Removing user `makulu' ...
Warning: group `makulu' has no more members.
Done.
cp: cannot create regular file '/target/home/zebedee/.face': No such file or directory
chroot /target/ /bin/sh -c "chown zebedee:zebedee /home/zebedee/.face"
chown: invalid user: ‘zebedee:zebedee’
 --> Writing fstab
 --> Writing hostname
 --> Setting the locale
chroot /target/ /bin/sh -c "locale-gen"
Generating locales (this might take a while)...
  en_AG.UTF-8... done
  en_AU.UTF-8... done
  en_BW.UTF-8... done
  en_CA.UTF-8... done
  en_DK.UTF-8... done
  en_GB.UTF-8... done
  en_HK.UTF-8... done
  en_IE.UTF-8... done
  en_IN.UTF-8... done
  en_NG.UTF-8... done
  en_NZ.UTF-8... done
  en_PH.UTF-8... done
  en_SG.UTF-8... done
  en_US.UTF-8... done
  en_ZA.UTF-8... done
  en_ZM.UTF-8... done
  en_ZW.UTF-8... done
Generation complete.
chroot /target/ /bin/sh -c "update-locale LANG='en_GB.UTF-8'"
chroot /target/ /bin/sh -c "update-locale LANG=en_GB.UTF-8"
 --> Setting the timezone
 --> Localizing packages
cp: missing destination file operand after '/target/debs/'
Try 'cp --help' for more information.
chroot /target/ /bin/sh -c "dpkg -i /debs/*"
dpkg: error processing archive /debs/* (--install):
 cannot access archive: No such file or directory
Errors were encountered while processing:
 /debs/*
 --> Setting the keyboard
chroot /target/ /bin/sh -c "rm /etc/default/console-setup"
chroot /target/ /bin/sh -c "mv /etc/default/console-setup.new /etc/default/console-setup"
chroot /target/ /bin/sh -c "rm /etc/default/keyboard"
chroot /target/ /bin/sh -c "mv /etc/default/keyboard.new /etc/default/keyboard"
 --> Configuring Grub
 --> Running grub-install
chroot /target/ /bin/sh -c "grub-install --force /dev/sdb"
Installing for x86_64-efi platform.
efibootmgr: EFI variables are not supported on this system.
efibootmgr: EFI variables are not supported on this system.
Installation finished. No error reported.
chroot /target/ /bin/sh -c "update-grub"
Generating grub configuration file ...
using custom appearance settings
Found background image: /usr/share/splash.png
Found linux image: /boot/vmlinuz-4.4.0-71-generic
Found initrd image: /boot/initrd.img-4.4.0-71-generic
ERROR: mkdir /var/lock/dmraid
ERROR: mkdir /var/lock/dmraid
ERROR: mkdir /var/lock/dmraid
ERROR: mkdir /var/lock/dmraid
ERROR: mkdir /var/lock/dmraid
ERROR: mkdir /var/lock/dmraid
ERROR: mkdir /var/lock/dmraid
ERROR: mkdir /var/lock/dmraid
ERROR: mkdir /var/lock/dmraid
ERROR: mkdir /var/lock/dmraid
ERROR: mkdir /var/lock/dmraid
ERROR: mkdir /var/lock/dmraid
ERROR: mkdir /var/lock/dmraid
ERROR: mkdir /var/lock/dmraid
grub-probe: error: cannot find a GRUB drive for /dev/sde1.  Check your device.map.
Found Peppermint 7 Seven (7) on /dev/nvme0n1p2
Found Solus (2017.01.01.0) on /dev/sdb6
done
 --> Running grub-mkconfig
chroot /target/ /bin/sh -c "grub-mkconfig -o /boot/grub/grub.cfg"
Generating grub configuration file ...
using custom appearance settings
Found background image: /usr/share/splash.png
Found linux image: /boot/vmlinuz-4.4.0-71-generic
Found initrd image: /boot/initrd.img-4.4.0-71-generic
grub-probe: error: cannot find a GRUB drive for /dev/sde1.  Check your device.map.
Found Peppermint 7 Seven (7) on /dev/nvme0n1p2
Found Solus (2017.01.01.0) on /dev/sdb6
done
 --> Configuring Initramfs
chroot /target/ /bin/sh -c "/usr/sbin/update-initramfs -t -u -k all"
I: update-initramfs is disabled (live system is running without media mounted on /lib/live/mount/medium).
chroot /target/ /bin/sh -c "/usr/bin/sha1sum /boot/initrd.img-4.4.0-71-generic > /var/lib/initramfs-tools/4.4.0-71-generic"
 --> Cleaning APT
chroot /target/ /bin/sh -c "sed -i 's/^deb cdrom/#deb cdrom/' /etc/apt/sources.list"
chroot /target/ /bin/sh -c "apt-get -y --force-yes autoremove"
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages will be REMOVED:
  apport-symptoms casper genisoimage gir1.2-wnck-3.0
  gnome-accessibility-themes gnome-icon-theme-symbolic gnome-themes-standard
  gnome-themes-standard-data grub-pc-bin gstreamer0.10-plugins-base
  gstreamer0.10-pulseaudio hddtemp inxi ladspa-sdk libglib2.0-bin
  libgstreamer-plugins-base0.10-0 libgstreamer0.10-0 liblightdm-gobject-1-0
  libunique-1.0-0 localechooser-data memtest86+ mint-kernel-info mint-mirrors
  python-geoip python3-apport python3-problem-report python3-pycurl
  python3-software-properties python3-systemd software-properties-common
  swh-plugins unattended-upgrades user-setup xfce4-mixer xresprobe
0 upgraded, 0 newly installed, 35 to remove and 0 not upgraded.
After this operation, 30.5 MB disk space will be freed.
(Reading database ... 149228 files and directories currently installed.)
Removing apport-symptoms (0.20) ...
Removing casper (1.376.2) ...
Removing genisoimage (9:1.1.11-3ubuntu1) ...
Removing gir1.2-wnck-3.0:i386 (3.14.1-2) ...
Removing gnome-accessibility-themes (3.18.0-2ubuntu1) ...
Removing gnome-icon-theme-symbolic (3.12.0-1) ...
Removing gnome-themes-standard:i386 (3.18.0-2ubuntu1) ...
Removing gnome-themes-standard-data (3.18.0-2ubuntu1) ...
Removing grub-pc-bin (2.02~beta2-36ubuntu3.8) ...
Removing xfce4-mixer (1:4.11.0-1ubuntu2~14.04) ...
Removing gstreamer0.10-plugins-base:i386 (0.10.36-2ubuntu0.1) ...
Removing gstreamer0.10-pulseaudio:i386 (0.10.31-3+nmu4ubuntu2.16.04.3) ...
Removing hddtemp (0.3-beta15-52) ...
Running in chroot, ignoring request.
Removing inxi (2.2.35-0ubuntu1) ...
Removing ladspa-sdk (1.13-2) ...
Removing libglib2.0-bin (2.48.2-0ubuntu1) ...
Removing libgstreamer-plugins-base0.10-0:i386 (0.10.36-2ubuntu0.1) ...
Removing libgstreamer0.10-0:i386 (0.10.36-1.5ubuntu1) ...
Removing liblightdm-gobject-1-0:i386 (1.18.3-0ubuntu1) ...
Removing libunique-1.0-0 (1.1.6-5) ...
Removing localechooser-data (2.65ubuntu4) ...
Removing memtest86+ (5.01-3ubuntu2) ...
Generating grub configuration file ...
using custom appearance settings
Found background image: /usr/share/splash.png
Found linux image: /boot/vmlinuz-4.4.0-71-generic
Found initrd image: /boot/initrd.img-4.4.0-71-generic
grub-probe: error: cannot find a GRUB drive for /dev/sde1.  Check your device.map.
Found Peppermint 7 Seven (7) on /dev/nvme0n1p2
Found Solus (2017.01.01.0) on /dev/sdb6
done
Removing mint-kernel-info (1.0.1) ...
Removing mint-mirrors (1.1.5) ...
Removing python-geoip (1.3.2-1build2) ...
Removing python3-apport (2.20.1-0ubuntu2.5) ...
Removing python3-problem-report (2.20.1-0ubuntu2.5) ...
Removing python3-pycurl (7.43.0-1ubuntu1) ...
Removing python3-software-properties (1.6.0) ...
Removing python3-systemd (231-2build1) ...
Removing software-properties-common (1.6.0) ...
Removing swh-plugins (0.4.15+1-8) ...
Removing unattended-upgrades (0.90ubuntu0.3) ...
Removing user-setup (1.63ubuntu4) ...
Removing xresprobe (0.4.24ubuntu9) ...
Processing triggers for man-db (2.7.5-1) ...
Processing triggers for gnome-icon-theme (3.12.0-1ubuntu3) ...
Processing triggers for menu (2.1.47ubuntu1) ...
Processing triggers for gnome-menus (3.13.3-6ubuntu3.1) ...
Processing triggers for desktop-file-utils (0.22-1ubuntu5.1) ...
Processing triggers for mime-support (3.59ubuntu1) ...
Warning: mailcap line not starting with a media type in emerald
Problematic line:  application/x-emerald-theme; nametemplate=%s.emerald
Processing triggers for libc-bin (2.23-0ubuntu7) ...
W: --force-yes is deprecated, use one of the options starting with --allow instead.
 --> Unmounting partitions
umount: /target/media/cdrom: mountpoint not found
EXECUTING: 'umount /target/boot/efi'
EXECUTING: 'umount /target'
EXECUTING: 'umount /source'
 --> All done
Showing QuestionDialog (The installation is now comple ...)
 ## INSTALLATION COMPLETE
makulu@makulu:~$