Boost WiFi on OpenWRT

Boost WiFi on OpenWRT


First there is no iwconfig you need to install it:
opkg update
opkg install wireless-tools

iwconfig command shows current wireless power outpu:
# iwconfig
wlan0 IEEE 802.11bgn Mode:Master Tx-Power=20 dBm

Maximal power is defined by multiple capability of your hardware and by laws in your country (regulatory domain).


Check your current regulatory domain via / etc/config/wireless file or just use this command:
# iw reg get
country US:
(2402 - 2472 @ 40), (3, 27)
(5170 - 5250 @ 40), (3, 17)
(5250 - 5330 @ 40), (3, 20), DFS
(5490 - 5600 @ 40), (3, 20), DFS
(5650 - 5710 @ 40), (3, 20), DFS
(5735 - 5835 @ 40), (3, 30)


I don’t live in USA so I’ll change this to my country:
# iw reg set HR

# iw reg get
country HR:
(2402 - 2482 @ 40), (N/A, 20)
(5170 - 5250 @ 40), (N/A, 20)
(5250 - 5330 @ 40), (N/A, 20), DFS
(5490 - 5710 @ 40), (N/A, 27), DFS

You need to be careful because some countries like BO allow setting upto 1000 mW (30 dBm)! But still if your hardware is not capable of such high power that you can’t push it over the limit.

Check wireless capability of your hardware via iw command:
iw phy0 info

Manualy set output power to 50mW (17dBm):
iw phy phy0 set txpower fixed 17000
or
iwconfig wlan0 txpower 17