Enter disk devices separated by spaces (e.g. sda sdb): sde

Selected disks: sde
PNY_CS900_2TB_SSD           1.8T disk sde
Is this correct? (y/N): y

You can select one-pass for the traditional once-thru mode, or
burn-in mode to keep looping forever.

One-pass or Burn-in mode? (o/B): o
Performing initial serial array read (baseline speeds)
Sun Jun 25 01:52:51 CEST 2023

Sun Jun 25 01:55:06 CEST 2023
Completed: initial serial array read (baseline speeds)

This test checks to see how fast one device at a time is.  If all
your disks are the same type and attached in the same manner. they
should be of similar speeds.  Each individual disk will now be
compared to the average speed.  Results that are unusually slow or
unusually fast may be tagged as such.  It is up to you to decide if
there is something wrong.

Array's average speed is 389.96 MB/sec per disk

Disk    Disk Size  MB/sec %ofAvg
------- ---------- ------ ------
sde      2000398MB    390    100

This next test attempts to read all devices in parallel.  This is
primarily a stress test of your disk controller, but may also find
limits in your PCIe bus, SAS expander topology, etc.  Ideally, if
all of your disks are of the same type and connected the same way,
then all of your disks should be able to read their contents in
about the same amount of time.  Results that are unusually slow or
unusually fast may be tagged as such.  It is up to you to decide if
there is something wrong.

Performing initial parallel array read
Sun Jun 25 01:55:06 CEST 2023
The disk sde appears to be 2000398 MB.
Disk is reading at about 378 MB/sec
This suggests that this pass may take around 88 minutes

                   Serial Parall % of
Disk    Disk Size  MB/sec MB/sec Serial
------- ---------- ------ ------ ------
sde      2000398MB    390    389    100

Awaiting completion: initial parallel array read

Sun Jun 25 03:17:40 CEST 2023
Completed: initial parallel array read

Disk's average time is 4954 seconds per disk

Disk    Bytes Transferred Seconds %ofAvg
------- ----------------- ------- ------
sde         2000398934016    4954    100

This next test attempts to read all devices while forcing seeks.
This is primarily a stress test of your hard disks.  It does thhis
by running several simultaneous dd sessions on each disk.

Performing initial parallel seek-stress array read
Sun Jun 25 03:17:40 CEST 2023
The disk sde appears to be 2000398 MB.
Disk is reading at about 475 MB/sec
This suggests that this pass may take around 70 minutes

                   Serial Parall % of
Disk    Disk Size  MB/sec MB/sec Serial
------- ---------- ------ ------ ------
sde      2000398MB    390    456    117

Awaiting completion: initial parallel seek-stress array read


Sun Jun 25 11:17:19 CEST 2023
Completed: initial parallel seek-stress array read

Disk's average time is 27515 seconds per disk

Disk    Bytes Transferred Seconds %ofAvg
------- ----------------- ------- ------
sde         2000398934016   27515    100