Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.6-200.fc39.x86_64] (local build)
- Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Red Pro
- Device Model: WDC WD8003FFBX-68B9AN0
- Serial Number: VRH7904K
- LU WWN Device Id: 5 000cca 0c2d167e7
- Firmware Version: 83.00A83
- User Capacity: 8,001,563,222,016 bytes [8.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database 7.3/5528
- ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Mon Dec 25 23:08:38 2023 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART Status not supported: Incomplete response, ATA output registers missing
- SMART overall-health self-assessment test result: PASSED
- Warning: This result is based on an Attribute check.
- General SMART Values:
- Offline data collection status: (0x80) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 87) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 910) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
- 2 Throughput_Performance 0x0004 132 132 054 Old_age Offline - 96
- 3 Spin_Up_Time 0x0007 172 172 024 Pre-fail Always - 506 (Average 437)
- 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 1645
- 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000a 100 100 067 Old_age Always - 0
- 8 Seek_Time_Performance 0x0004 128 128 020 Old_age Offline - 18
- 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 18549
- 10 Spin_Retry_Count 0x0012 100 100 060 Old_age Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 56
- 192 Power-Off_Retract_Count 0x0032 093 093 000 Old_age Always - 8758
- 193 Load_Cycle_Count 0x0012 093 093 000 Old_age Always - 8758
- 194 Temperature_Celsius 0x0002 150 150 000 Old_age Always - 40 (Min/Max 19/44)
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 18549 -
- # 2 Short offline Completed without error 00% 18522 -
- # 3 Short offline Completed without error 00% 18343 -
- # 4 Short offline Completed without error 00% 18175 -
- # 5 Short offline Completed without error 00% 18007 -
- # 6 Extended offline Completed without error 00% 17974 -
- # 7 Short offline Completed without error 00% 17839 -
- # 8 Short offline Completed without error 00% 17682 -
- # 9 Short offline Completed without error 00% 17505 -
- #10 Short offline Completed without error 00% 17335 -
- #11 Extended offline Completed without error 00% 17258 -
- #12 Short offline Completed without error 00% 17167 -
- #13 Short offline Completed without error 00% 17003 -
- #14 Short offline Completed without error 00% 16840 -
- #15 Short offline Completed without error 00% 16665 -
- #16 Short offline Completed without error 00% 16495 -
- #17 Short offline Completed without error 00% 16331 -
- #18 Short offline Completed without error 00% 16163 -
- #19 Short offline Completed without error 00% 16000 -
- #20 Short offline Completed without error 00% 15826 -
- #21 Extended offline Completed without error 00% 15808 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
