API tools faq
paste
Advertisement
Guest User

cAP AX startup

a guest
Dec 24th, 2023
100
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 121.43 KB | None | 0 0
raw download clone embed print report
  1. RouterOS supout.rif reader
  2. Select file: No file chosen Read file »
  3. .debug
  4. .proc
  5. .startup
  6. @syslog@
  7. 08.57@1: [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x51af8014]
  8. 08.57@1: [ 0.000000] Linux version 5.6.3 (agent@cicd-a06.mt.lv) (gcc version 11.1.0 (GCC)) #2 SMP Thu Dec 14 09:48:15 UTC 2023
  9. 08.57@1: [ 0.000000] Machine model: cAP ax
  10. 08.57@1: [ 0.000000] efi: Getting EFI parameters from FDT:
  11. 08.57@1: [ 0.000000] efi: UEFI not found.
  12. 08.57@1: [ 0.000000] On node 0 totalpages: 14639
  13. 08.57@1: [ 0.000000] DMA zone: 15 pages used for memmap
  14. 08.57@1: [ 0.000000] DMA zone: 0 pages reserved
  15. 08.57@1: [ 0.000000] DMA zone: 14639 pages, LIFO batch:3
  16. 08.57@1: [ 0.000000] psci: probing for conduit method from DT.
  17. 08.57@1: [ 0.000000] psci: PSCIv1.0 detected in firmware.
  18. 08.57@1: [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  19. 08.57@1: [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  20. 08.57@1: [ 0.000000] psci: SMC Calling Convention v1.0
  21. 08.57@1: [ 0.000000] WARNING: x1-x3 nonzero in violation of boot protocol:
  22. 08.57@1: [ 0.000000] x1: 0000000000000000
  23. 08.57@1: [ 0.000000] x2: 0000000000000006
  24. 08.57@1: [ 0.000000] x3: 000000000000000f
  25. 08.57@1: [ 0.000000] This indicates a broken bootloader or old kernel
  26. 08.57@1: [ 0.000000] percpu: Embedded 2 pages/cpu s40664 r32768 d57640 u131072
  27. 08.57@1: [ 0.000000] pcpu-alloc: s40664 r32768 d57640 u131072 alloc=2*65536
  28. 08.57@1: [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  29. 08.57@1: [ 0.000000] Detected VIPT I-cache on CPU0
  30. 08.57@1: [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration
  31. 08.57@1: [ 0.000000] spectrev2 mitigation disabled by kernel configuration
  32. 08.57@1: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 14624
  33. 08.57@1: [ 0.000000] Kernel command line: root=/dev/ram0 no-uart no-buzzer benand_no_swecc=2 yaffs.inband_tags=1 parts=1 boot_part_size=8388608 clk_ignore_unused arm64=Y board=cap-cp ver=7.13 bver=7.8 hw_opt=08290001 boot=1 mlc=11
  34. 08.57@1: [ 0.000000] Dentry cache hash table entries: 131072 (order: 4, 1048576 bytes, linear)
  35. 08.57@1: [ 0.000000] Inode-cache hash table entries: 65536 (order: 3, 524288 bytes, linear)
  36. 08.57@1: [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  37. 08.57@1: [ 0.000000] Memory: 923008K/936896K available (5628K kernel code, 1094K rwdata, 1536K rodata, 576K init, 808K bss, 13888K reserved, 0K cma-reserved)
  38. 08.57@1: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  39. 08.57@1: [ 0.000000] rcu: Hierarchical RCU implementation.
  40. 08.57@1: [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
  41. 08.57@1: [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  42. 08.57@1: [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  43. 08.57@1: [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  44. 08.57@1: [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt).
  45. 08.57@1: [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  46. 08.57@1: [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  47. 08.57@1: [ 0.000352] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  48. 08.57@1: [ 0.000366] pid_max: default: 32768 minimum: 301
  49. 08.57@1: [ 0.000568] Mount-cache hash table entries: 8192 (order: 0, 65536 bytes, linear)
  50. 08.57@1: [ 0.000587] Mountpoint-cache hash table entries: 8192 (order: 0, 65536 bytes, linear)
  51. 08.57@1: [ 0.002420] rcu: Hierarchical SRCU implementation.
  52. 08.57@1: [ 0.003113] MSM Memory Dump base table set up
  53. 08.57@1: [ 0.003130] MSM Memory Dump apps data table set up
  54. 08.57@1: [ 0.003136] EFI services will not be available.
  55. 08.57@1: [ 0.003501] smp: Bringing up secondary CPUs ...
  56. 08.57@1: [ 0.004095] Detected VIPT I-cache on CPU1
  57. 08.57@1: [ 0.004163] CPU1: Booted secondary processor 0x0000000001 [0x51af8014]
  58. 08.57@1: [ 0.004798] Detected VIPT I-cache on CPU2
  59. 08.57@1: [ 0.004841] CPU2: Booted secondary processor 0x0000000002 [0x51af8014]
  60. 08.57@1: [ 0.005437] Detected VIPT I-cache on CPU3
  61. 08.57@1: [ 0.005477] CPU3: Booted secondary processor 0x0000000003 [0x51af8014]
  62. 08.57@1: [ 0.005555] smp: Brought up 1 node, 4 CPUs
  63. 08.57@1: [ 0.005566] SMP: Total of 4 processors activated.
  64. 08.57@1: [ 0.005573] CPU features: detected: 32-bit EL0 Support
  65. 08.57@1: [ 0.005579] CPU features: detected: CRC32 instructions
  66. 08.57@1: [ 0.006903] CPU: All CPU(s) started at EL1
  67. 08.57@1: [ 0.006994] alternatives: patching kernel code
  68. 08.57@1: [ 0.007712] devtmpfs: initialized
  69. 08.57@1: [ 0.016588] random: get_random_u32 called from _stext+0x214d04/0x56dd34 with crng_init=0
  70. 08.57@1: [ 0.017127] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  71. 08.57@1: [ 0.017145] futex hash table entries: 1024 (order: 0, 65536 bytes, linear)
  72. 08.57@1: [ 0.017357] pinctrl core: initialized pinctrl subsystem
  73. 08.57@1: [ 0.017721] thermal_sys: Registered thermal governor 'step_wise'
  74. 08.57@1: [ 0.018390] NET: Registered protocol family 16
  75. 08.57@1: [ 0.018893] DMA: preallocated 256 KiB pool for atomic allocations
  76. 08.57@1: [ 0.019289] NET: Registered protocol family 42
  77. 08.57@1: [ 0.020129] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  78. 08.57@1: [ 0.020218] ASID allocator initialised with 65536 entries
  79. 08.57@1: [ 0.020421] Read of property:cpu_type from node failed
  80. 08.57@1: [ 0.020429] CPU: unavail, SoC Version: 16.0
  81. 08.57@1: [ 0.020539] Initializing Peripheral Bus System - PBS
  82. 08.57@1: [ 0.020670] pbs entry was not found in device-tree
  83. 08.57@1: [ 0.020773] Serial: AMBA PL011 UART driver
  84. 08.57@1: [ 0.066964] gpio gpiochip0: (1000000.pinctrl): added GPIO chardev (254:0)
  85. 08.57@1: [ 0.067028] gpiochip_setup_dev: registered GPIOs 0 to 79 on device: gpiochip0 (1000000.pinctrl)
  86. 08.57@1: [ 0.067045] gpio gpiochip0: (1000000.pinctrl): created GPIO range 0->79 ==> 1000000.pinctrl PIN 0->79
  87. 08.57@1: [ 0.071831] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
  88. 08.57@1: [ 0.080251] cryptd: max_cpu_qlen set to 1000
  89. 08.57@1: [ 0.081990] ACPI: Interpreter disabled.
  90. 08.57@1: [ 0.082839] SCSI subsystem initialized
  91. 08.57@1: [ 0.083110] libata version 3.00 loaded.
  92. 08.57@1: [ 0.083474] pps_core: LinuxPPS API ver. 1 registered
  93. 08.57@1: [ 0.083480] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
  94. 08.57@1: [ 0.083499] PTP clock support registered
  95. 08.57@1: [ 0.085945] clocksource: Switched to clocksource arch_sys_counter
  96. 08.57@1: [ 0.086531] pnp: PnP ACPI: disabled
  97. 08.57@1: [ 0.087386] NET: Registered protocol family 2
  98. 08.57@1: [ 0.087926] tcp_listen_portaddr_hash hash table entries: 4096 (order: 0, 65536 bytes, linear)
  99. 08.57@1: [ 0.088042] TCP established hash table entries: 8192 (order: 0, 65536 bytes, linear)
  100. 08.57@1: [ 0.088126] TCP bind hash table entries: 8192 (order: 1, 131072 bytes, linear)
  101. 08.57@1: [ 0.088270] TCP: Hash tables configured (established 8192 bind 8192)
  102. 08.57@1: [ 0.088351] UDP hash table entries: 2048 (order: 0, 65536 bytes, linear)
  103. 08.57@1: [ 0.088462] UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes, linear)
  104. 08.57@1: [ 0.088729] PCI: CLS 0 bytes, default 64
  105. 08.57@1: [ 0.088897] Trying to unpack rootfs image as initramfs...
  106. 08.57@1: [ 0.120052] Freeing initrd memory: 64K
  107. 08.57@1: [ 0.121204] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  108. 08.57@1: [ 0.125017] workingset: timestamp_bits=46 max_order=14 bucket_order=0
  109. 08.57@1: [ 0.133474] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  110. 08.57@1: [ 0.133487] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  111. 08.57@1: [ 0.133950] yaffs: yaffs Installing.
  112. 08.57@1: [ 0.152619] NET: Registered protocol family 38
  113. 08.57@1: [ 0.152662] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  114. 08.57@1: [ 0.152670] io scheduler mq-deadline registered
  115. 08.57@1: [ 0.156194] switchtec: loaded.
  116. 08.57@1: [ 0.159983] NET: Registered protocol family 27
  117. 08.57@1: [ 0.159992] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled
  118. 08.57@1: [ 0.159998] qmi_log_init: IPC Logging disabled
  119. 08.57@1: [ 0.160003] qmi_log_init: IPC Logging disabled
  120. 08.57@1: [ 0.161753] msm_serial: driver initialized
  121. 08.57@1: [ 0.163454] loop: module loaded
  122. 08.57@1: [ 0.276942] nand: device found, Manufacturer ID: 0x98, Chip ID: 0xa1
  123. 08.57@1: [ 0.276952] nand: Toshiba NAND 128MiB 1,8V 8-bit
  124. 08.57@1: [ 0.276961] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  125. 08.57@1: [ 0.277024] 0x000000000000-0x000000800000 : "RouterBoard NAND 1 Boot"
  126. 08.57@1: [ 0.290995] 0x000000800000-0x000008000000 : "RouterBoard NAND 1 Main"
  127. 08.57@1: [ 0.303129] random: fast init done
  128. 08.57@1: [ 0.489680] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
  129. 08.57@1: [ 0.490348] spi-nor spi0.0: found gd25lq32, expected m25p80
  130. 08.57@1: [ 0.490992] spi-nor spi0.0: gd25lq32 (4096 Kbytes)
  131. 08.57@1: [ 0.491015] 1 fixed-partitions partitions found on MTD device spi0.0
  132. 08.57@1: [ 0.491021] Creating 1 MTD partitions on "spi0.0":
  133. 08.57@1: [ 0.491031] 0x0000002c0000-0x000000340000 : "RouterBoot"
  134. 08.57@1: [ 0.492281] spi_qup 78b6000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
  135. 08.57@1: [ 0.493837] mdio_bus fixed-0: GPIO lookup for consumer reset
  136. 08.57@1: [ 0.493847] mdio_bus fixed-0: using lookup tables for GPIO lookup
  137. 08.57@1: [ 0.493857] mdio_bus fixed-0: No GPIO consumer reset found
  138. 08.57@1: [ 0.493891] libphy: Fixed MDIO Bus: probed
  139. 08.57@1: [ 0.496746] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/button[0]' - status (0)
  140. 08.57@1: [ 0.496922] Registered gpio 16 as button
  141. 08.57@1: [ 0.496955] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/mode-button[0]' - status (0)
  142. 08.57@1: [ 0.497050] Registered gpio 9 as mode-button
  143. 08.57@1: [ 0.497078] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/usb-power-off[0]' - status (0)
  144. 08.57@1: [ 0.497172] Registered gpio 37 as usb-power-off
  145. 08.57@1: [ 0.497300] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/system-led/red[0]' - status (0)
  146. 08.57@1: [ 0.497397] Registered gpio 19 as system-led:red
  147. 08.57@1: [ 0.497470] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/system-led/green[0]' - status (0)
  148. 08.57@1: [ 0.497566] Registered gpio 20 as system-led:green
  149. 08.57@1: [ 0.497639] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/system-led/blue[0]' - status (0)
  150. 08.57@1: [ 0.497735] Registered gpio 18 as system-led:blue
  151. 08.57@1: [ 0.497811] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/poe-led[0]' - status (0)
  152. 08.57@1: [ 0.497902] Registered gpio 29 as poe-led
  153. 08.57@1: [ 0.497976] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/lte-reset[0]' - status (0)
  154. 08.57@1: [ 0.498068] Registered gpio 60 as lte-reset
  155. 08.57@1: [ 0.498142] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/mpcie-power-off[0]' - status (0)
  156. 08.57@1: [ 0.498234] Registered gpio 35 as mpcie-power-off
  157. 08.57@1: [ 0.498928] NET: Registered protocol family 17
  158. 08.57@1: [ 0.498948] mpls_gso: MPLS GSO support
  159. 08.57@1: [ 0.499739] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
  160. 08.57@1: [ 0.500339] ipq6018_s2: Bringing 1uV into 587500-587500uV
  161. 08.57@1: [ 0.501640] ipq6018_l2: Bringing 1uV into 1104000-1104000uV
  162. 08.57@1: [ 0.502849] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
  163. 08.57@1: [ 0.502967] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0
  164. 08.57@1: [ 0.502975] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 2
  165. 08.57@1: [ 0.502983] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
  166. 08.57@1: [ 0.503012] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
  167. 08.57@1: [ 0.503085] cpr3_mem_acc_init: apc: not using memory accelerator regulator
  168. 08.57@1: [ 0.503095] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 675000 uV
  169. 08.57@1: [ 0.503102] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 787500 uV
  170. 08.57@1: [ 0.503109] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 850000 uV
  171. 08.57@1: [ 0.503116] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop= 900000 uV
  172. 08.57@1: [ 0.503155] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 635, quot_offset[ 7]= 0
  173. 08.57@1: [ 0.503163] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 826, quot_offset[ 7]= 190
  174. 08.57@1: [ 0.503172] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]= 924, quot_offset[ 7]= 95
  175. 08.57@1: [ 0.503180] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]= 994, quot_offset[ 7]= 70
  176. 08.57@1: [ 0.503431] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop
  177. 08.57@1: [ 0.503692] cpr3_regulator_debugfs_ctrl_add: apc: cpr3-regulator debugfs base directory creation failed
  178. 08.57@1: [ 0.504057] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  179. 08.57@1: [ 0.504068] cpu cpu0: _opp_add: OPP not supported by regulators (0)
  180. 08.57@1: [ 0.504197] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 799999 KHz
  181. 08.57@1: [ 0.504872] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 864000 KHz
  182. 08.57@1: [ 0.505408] clk: Not disabling unused clocks
  183. 08.57@1: [ 0.505460] Warning: unable to open an initial console.
  184. 08.57@1: [ 0.505578] Freeing unused kernel memory: 576K
  185. 08.57@1: [ 0.535960] Run /init as init process
  186. 08.57@1: [ 0.535964] with arguments:
  187. 08.57@1: [ 0.535969] /init
  188. 08.57@1: [ 0.535973] no-uart
  189. 08.57@1: [ 0.535977] no-buzzer
  190. 08.57@1: [ 0.535981] with environment:
  191. 08.57@1: [ 0.535985] HOME=/
  192. 08.57@1: [ 0.535989] TERM=linux
  193. 08.57@1: [ 0.535993] parts=1
  194. 08.57@1: [ 0.535997] arm64=Y
  195. 08.57@1: [ 0.536001] board=cap-cp
  196. 08.57@1: [ 0.536005] ver=7.13
  197. 08.57@1: [ 0.536009] bver=7.8
  198. 08.57@1: [ 0.536012] hw_opt=08290001
  199. 08.57@1: [ 0.536016] boot=1
  200. 08.57@1: [ 0.536283] process '/init' started with executable stack
  201. 08.57@1: [ 0.537336] yaffs: dev is 32505857 name is "mtdblock1" rw
  202. 08.57@1: [ 0.537342] yaffs: passed flags ""
  203. 08.57@1: [ 0.537349] yaffs: yaffs: Attempting MTD mount of 31.1,"mtdblock1"
  204. 08.57@1: [ 0.537354] yaffs: auto selecting yaffs2
  205. 08.57@1: [ 0.567744] yaffs: yaffs_read_super: is_checkpointed 1
  206. 08.57@1: [ 0.569578] yaffs: dev is 32505856 name is "mtdblock0" rw
  207. 08.57@1: [ 0.569583] yaffs: passed flags ""
  208. 08.57@1: [ 0.569590] yaffs: yaffs: Attempting MTD mount of 31.0,"mtdblock0"
  209. 08.57@1: [ 0.569595] yaffs: auto selecting yaffs2
  210. 08.57@1: [ 0.578072] yaffs: yaffs_read_super: is_checkpointed 1
  211. 08.57@1: [ 2.041649] random: crng init done
  212. 08.57@1: [ 8.394977] new-flash: starting...
  213. 08.57@1: [ 8.394993] using MTD device
  214. 08.57@1: [ 8.409963] HW_OPT[08290001]
  215. 08.57@1: [ 8.409969] board name = cAPGi-5HaxD2HaxD
  216. 08.57@1: [ 8.409973] market name = cAP ax
  217. 08.57@1: [ 8.409978] alloc spi_page_buf size = 4096
  218. 08.57@1: [ 8.411218] radio data lz77 decompressed from 5204 to 12200
  219. 08.57@1: [ 8.470311] NET: Registered protocol family 1
  220. 08.57@1: [ 8.564489] logring: default buf size:65536, console_loglevel:1
  221. 08.57@1: [ 8.581719] printk: console [logring0] enabled
  222. 08.69@3: [ 8.702737] NET: Registered protocol family 10
  223. 08.69@3: [ 8.703550] Segment Routing with IPv6
  224.  
  225. @sstore@
  226. 09.11@0: run
  227.  
  228. @syslog@
  229. 09.24@3: [ 9.255224] stm8-fan bradcrumb read no dev
  230. 09.24@3: [ 9.255252] fan-i2c bradcrumb read no dev
  231. 09.24@3: [ 9.255262] last_reason = 0xffffffff
  232. 09.24@3: [ 9.255271] fan-i2c bradcrumb write no dev
  233. 09.37@3: [ 9.377109] get_al_cause: last_reason = 0xffffffff
  234. 09.37@3: [ 9.383502] nand id 1580a198 00000000
  235. 09.37@3: [ 9.383657] uid->nand_id c81660c8
  236. 09.37@3: [ 9.383776] spi unique id 1e450e3833375548
  237. 09.41@3: [ 9.422066] nf_conntrack: table size 917504 (4 * 229376)
  238. 09.46@1: [ 9.474848] skb_bin_update_max_len: 0->1664
  239. 09.46@1: [ 9.475160] gre: register ipv4
  240. 09.46@1: [ 9.475176] gre: register ipv6
  241. 09.49@1: [ 9.503351] sizeof(struct phy):768
  242. 09.54@3: [ 9.553452] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  243.  
  244. @loader@
  245. 09.59@0: forked
  246. 09.59@0: reading configuration
  247. 09.59@0: loaded 1 entries from [bserv]
  248. 09.59@0: loaded 1 entries from [cerm]
  249. 09.59@0: loaded 1 entries from [cloud]
  250. 09.59@0: loaded 1 entries from [dhcp/client6]
  251. 09.59@0: loaded 1 entries from [dhcp/client_options6]
  252. 09.59@0: loaded 3 entries from [dhcp/client_options]
  253. 09.59@0: loaded 1 entries from [dhcp/client]
  254. 09.59@0: loaded 1 entries from [dhcp/server/subnet]
  255. 09.59@0: loaded 1 entries from [dot1x/mka-profile]
  256. 09.59@0: loaded 3 entries from [group]
  257. 09.59@0: loaded 1 entries from [hotspot/profile]
  258. 09.60@0: loaded 1 entries from [hotspot/srvprof]
  259. 09.60@0: loaded 1 entries from [hotspot/user]
  260. 09.60@0: loaded 1 entries from [hotspot/wgip]
  261. 09.60@0: loaded 1 entries from [ipsec/identity]
  262. 09.60@0: loaded 1 entries from [ipsec/modecfg]
  263. 09.60@0: loaded 1 entries from [ipsec/peer_proposal]
  264. 09.60@0: loaded 1 entries from [ipsec/peer]
  265. 09.60@0: loaded 1 entries from [ipsec/policy_group]
  266. 09.60@0: loaded 2 entries from [ipsec/policy]
  267. 09.60@0: loaded 1 entries from [ipsec/sainfo]
  268. 09.60@0: loaded 1 entries from [lcdtouch]
  269. 09.60@0: loaded 1 entries from [leds]
  270. 09.60@0: loaded 2 entries from [led_triggers]
  271. 09.60@0: loaded 1 entries from [net/apn]
  272. 09.60@0: loaded 4 entries from [net/devices]
  273. 09.60@0: loaded 1 entries from [net/ebt-filter]
  274. 09.60@0: loaded 1 entries from [net/ebt-nat]
  275. 09.60@0: loaded 1 entries from [net/ipt6-filter]
  276. 09.60@0: loaded 1 entries from [net/ipt6-mangle]
  277. 09.60@0: loaded 1 entries from [net/ipt6-nat]
  278. 09.60@0: loaded 1 entries from [net/ipt6-raw]
  279. 09.60@0: loaded 1 entries from [net/ipt-filter]
  280. 09.60@0: loaded 1 entries from [net/ipt-mangle]
  281. 09.60@0: loaded 1 entries from [net/ipt-nat]
  282. 09.60@0: loaded 1 entries from [net/ipt-raw]
  283. 09.60@0: loaded 1 entries from [net/raw]
  284. 09.60@0: loaded 10 entries from [net/queuetypes]
  285. 09.60@0: loaded 1 entries from [net/simplequeues]
  286. 09.60@0: loaded 1 entries from [net/switch-acl-entries]
  287. 09.60@0: loaded 2 entries from [net/vrf]
  288. 09.60@0: loaded 1 entries from [net/wireguard]
  289. 09.60@0: loaded 1 entries from [ntp]
  290. 09.60@0: loaded 1 entries from [ovpn/server]
  291. 09.60@0: loaded 2 entries from [ppp/profile]
  292. 09.60@0: loaded 1 entries from [r5/routing/filter/srule]
  293. 09.60@0: loaded 1 entries from [r5/routing/ospf/iface]
  294. 09.60@0: loaded 1 entries from [radvd/iface]
  295. 09.60@0: loaded 1 entries from [resolver/static]
  296. 09.60@0: loaded 2 entries from [rps]
  297. 09.60@0: loaded 1 entries from [snmpd]
  298. 09.60@0: loaded 1 entries from [snmp-communities]
  299. 09.60@0: loaded 1 entries from [unicl/client]
  300. 09.60@0: loaded 1 entries from [unicl/module]
  301. 09.61@0: loaded 1 entries from [upgrader]
  302. 09.61@0: loaded 1 entries from [user]
  303. 09.61@0: creating loader
  304. 09.61@0: sigusr1
  305. 09.61@0: scheduling service startup...
  306. 09.61@0: init multiplepeer 89, cpu count 4 percpu 80 maxproc 30 resulting n 3
  307. 09.61@0: init multiplepeer 61, cpu count 4 percpu 50 maxproc 12 resulting n 2
  308. 09.61@0: init multiplepeer 75, cpu count 4 percpu 50 maxproc 12 resulting n 2
  309. 09.61@0: init multiplepeer 12, cpu count 4 percpu 400 maxproc 1 resulting n 16
  310. 09.61@0: entering run...
  311. 09.61@0: checkForFreeMemory
  312. 09.61@0: ( static( pname=mproxy ) local( DEAD) peer(2,ffffffff,,BADID) ) run! started, pid 134
  313. 09.61@0: ( static( pname=mproxy pid=134 ) local( DEAD) peer(2,ffffffff,,BADID) ) entering state WAITING
  314. 09.61@0: checkForFreeMemory
  315. 09.62@0: ( static( pname=log ) local( DEAD) peer(3,ffffffff,,BADID) ) run! started, pid 135
  316. 09.62@0: ( static( pname=log pid=135 ) local( DEAD) peer(3,ffffffff,,BADID) ) entering state WAITING
  317. 09.62@0: checkForFreeMemory
  318. 09.62@0: ( static( pname=moduler ) local( DEAD) peer(6,ffffffff,,BADID) ) run! started, pid 136
  319. 09.62@0: ( static( pname=moduler pid=136 ) local( DEAD) peer(6,ffffffff,,BADID) ) entering state WAITING
  320. 09.62@0: checkForFreeMemory
  321. 09.62@0: ( static( pname=discover ) local( DEAD) peer(10,ffffffff,,BADID) ) run! started, pid 137
  322. 09.62@0: ( static( pname=discover pid=137 ) local( DEAD) peer(10,ffffffff,,BADID) ) entering state WAITING
  323. 09.62@0: checkForFreeMemory
  324. 09.62@0: ( static( pname=mactel ) local( DEAD) peer(15,ffffffff,,BADID) ) run! started, pid 138
  325. 09.62@0: ( static( pname=mactel pid=138 ) local( DEAD) peer(15,ffffffff,,BADID) ) entering state WAITING
  326. 09.62@0: checkForFreeMemory
  327. 09.62@0: ( static( pname=bridge2 ) local( DEAD) peer(16,ffffffff,,BADID) ) run! started, pid 139
  328. 09.62@0: ( static( pname=bridge2 pid=139 ) local( DEAD) peer(16,ffffffff,,BADID) ) entering state WAITING
  329. 09.62@0: checkForFreeMemory
  330. 09.62@0: ( static( pname=macping ) local( DEAD) peer(18,ffffffff,,BADID) ) run! started, pid 140
  331. 09.62@0: ( static( pname=macping pid=140 ) local( DEAD) peer(18,ffffffff,,BADID) ) entering state WAITING
  332. 09.62@0: checkForFreeMemory
  333. 09.62@0: ( static( pname=net ) local( DEAD) peer(20,ffffffff,,BADID) ) run! started, pid 141
  334. 09.62@0: ( static( pname=net pid=141 ) local( DEAD) peer(20,ffffffff,,BADID) ) entering state WAITING
  335. 09.62@0: checkForFreeMemory
  336. 09.62@0: ( static( pname=sys2 ) local( DEAD) peer(24,ffffffff,,BADID) ) run! started, pid 142
  337. 09.62@0: ( static( pname=sys2 pid=142 ) local( DEAD) peer(24,ffffffff,,BADID) ) entering state WAITING
  338. 09.62@0: checkForFreeMemory
  339. 09.62@0: ( static( pname=btest ) local( DEAD) peer(29,ffffffff,,BADID) ) run! started, pid 143
  340. 09.62@0: ( static( pname=btest pid=143 ) local( DEAD) peer(29,ffffffff,,BADID) ) entering state WAITING
  341. 09.62@0: checkForFreeMemory
  342. 09.62@0: ( static( pname=radvd ) local( DEAD) peer(31,ffffffff,,BADID) ) run! started, pid 144
  343. 09.62@0: ( static( pname=radvd pid=144 ) local( DEAD) peer(31,ffffffff,,BADID) ) entering state WAITING
  344. 09.63@0: checkForFreeMemory
  345. 09.63@0: ( static( pname=dhcpclient ) local( DEAD) peer(43,ffffffff,,BADID) ) run! started, pid 145
  346. 09.63@0: ( static( pname=dhcpclient pid=145 ) local( DEAD) peer(43,ffffffff,,BADID) ) entering state WAITING
  347. 09.63@0: checkForFreeMemory
  348. 09.63@0: ( static( pname=route ) local( DEAD) peer(44,ffffffff,,BADID) ) run! started, pid 146
  349. 09.63@0: ( static( pname=route pid=146 ) local( DEAD) peer(44,ffffffff,,BADID) ) entering state WAITING
  350. 09.63@0: checkForFreeMemory
  351. 09.63@0: ( static( pname=ntp ) local( DEAD) peer(47,ffffffff,,BADID) ) run! started, pid 147
  352. 09.63@0: ( static( pname=ntp pid=147 ) local( DEAD) peer(47,ffffffff,,BADID) ) entering state WAITING
  353. 09.63@0: checkForFreeMemory
  354. 09.63@0: ( static( pname=sermgr ) local( DEAD) peer(68,ffffffff,,BADID) ) run! started, pid 148
  355. 09.63@0: ( static( pname=sermgr pid=148 ) local( DEAD) peer(68,ffffffff,,BADID) ) entering state WAITING
  356. 09.63@0: checkForFreeMemory
  357. 09.63@0: ( static( pname=diskd ) local( DEAD) peer(79,ffffffff,,BADID) ) run! started, pid 149
  358. 09.63@0: ( static( pname=diskd pid=149 ) local( DEAD) peer(79,ffffffff,,BADID) ) entering state WAITING
  359. 09.63@0: checkForFreeMemory
  360. 09.63@0: ( static( pname=ipsec ) local( DEAD) peer(85,ffffffff,,BADID) ) run! started, pid 150
  361. 09.63@0: ( static( pname=ipsec pid=150 ) local( DEAD) peer(85,ffffffff,,BADID) ) entering state WAITING
  362. 09.63@0: checkForFreeMemory
  363. 09.63@0: ( static( pname=led ) local( DEAD) peer(118,ffffffff,,BADID) ) run! started, pid 151
  364. 09.63@0: ( static( pname=led pid=151 ) local( DEAD) peer(118,ffffffff,,BADID) ) entering state WAITING
  365. 09.63@0: checkForFreeMemory
  366. 09.63@0: ( static( pname=quickset ) local( DEAD) peer(120,ffffffff,,BADID) ) run! started, pid 152
  367. 09.63@0: ( static( pname=quickset pid=152 ) local( DEAD) peer(120,ffffffff,,BADID) ) entering state WAITING
  368. 09.63@0: checkForFreeMemory
  369. 09.63@0: ( static( pname=cloud ) local( DEAD) peer(123,ffffffff,,BADID) ) run! started, pid 153
  370. 09.63@0: ( static( pname=cloud pid=153 ) local( DEAD) peer(123,ffffffff,,BADID) ) entering state WAITING
  371. 09.63@0: checkForFreeMemory
  372. 09.66@0: ( static( pname=watchdog ) local( DEAD) peer(129,ffffffff,,BADID) ) run! started, pid 154
  373. 09.66@0: ( static( pname=watchdog pid=154 ) local( DEAD) peer(129,ffffffff,,BADID) ) entering state WAITING
  374. 09.66@0: checkForFreeMemory
  375. 09.66@0: ( static( pname=cloudpingd ) local( DEAD) peer(133,ffffffff,,BADID) ) run! started, pid 155
  376. 09.66@0: ( static( pname=cloudpingd pid=155 ) local( DEAD) peer(133,ffffffff,,BADID) ) entering state WAITING
  377. 09.66@0: checkForFreeMemory
  378.  
  379. @diskd@
  380. 09.65@0: main in
  381.  
  382. @mactel@
  383. 09.67@3: main() in
  384.  
  385. @ntp@
  386. 09.71@3: starting NTP
  387.  
  388. @loader@
  389. 09.75@0: ( static( pname=ww2 ) local( DEAD) peer(138,ffffffff,,BADID) ) run! started, pid 156
  390. 09.75@0: ( static( pname=ww2 pid=156 ) local( DEAD) peer(138,ffffffff,,BADID) ) entering state WAITING
  391. 09.79@0: read failed (EOF)
  392. 09.79@0: ( static( pname=cloudpingd pid=155 ) local( WAITING) peer(133,ffffffff,,BADID) ) entering state WAITSIG
  393. 09.79@0: ( static( pname=cloudpingd pid=155 ) local( WAITING) peer(133,ffffffff,,BADID) ) becoming ZOMBIE, draining queue
  394. 09.79@0: request to reply with error to NON-REQUEST message
  395. 09.79@0: ( static( pname=diskd pid=149 ) local( WAITING) peer(79,ffffffff,,BADID) ) entering state READY
  396. 09.79@0: ( static( pname=diskd pid=149 ) local( READY) peer(79,ffffffff,,BADID) ) sending READY_CONFIRM message
  397. 09.79@0: ( static( pname=diskd pid=149 ) local( READY) peer(79,ffffffff,,BADID) ) flusing queue
  398. 09.79@0: ( static( pname=ntp pid=147 ) local( WAITING) peer(47,ffffffff,,BADID) ) entering state READY
  399. 09.79@0: ( static( pname=ntp pid=147 ) local( READY) peer(47,ffffffff,,BADID) ) sending READY_CONFIRM message
  400. 09.79@0: ( static( pname=ntp pid=147 ) local( READY) peer(47,ffffffff,,BADID) ) flusing queue
  401. 09.79@0: ( static( pname=macping pid=140 ) local( WAITING) peer(18,ffffffff,,BADID) ) entering state READY
  402. 09.79@0: ( static( pname=macping pid=140 ) local( READY) peer(18,ffffffff,,BADID) ) sending READY_CONFIRM message
  403. 09.79@0: ( static( pname=macping pid=140 ) local( READY) peer(18,ffffffff,,BADID) ) flusing queue
  404. 09.79@0: ( static( pname=mactel pid=138 ) local( WAITING) peer(15,ffffffff,,BADID) ) entering state READY
  405. 09.79@0: ( static( pname=mactel pid=138 ) local( READY) peer(15,ffffffff,,BADID) ) sending READY_CONFIRM message
  406. 09.79@0: ( static( pname=mactel pid=138 ) local( READY) peer(15,ffffffff,,BADID) ) flusing queue
  407. 09.79@0: ( static( pname=discover pid=137 ) local( WAITING) peer(10,ffffffff,,BADID) ) entering state READY
  408. 09.79@0: ( static( pname=discover pid=137 ) local( READY) peer(10,ffffffff,,BADID) ) sending READY_CONFIRM message
  409. 09.79@0: ( static( pname=discover pid=137 ) local( READY) peer(10,ffffffff,,BADID) ) flusing queue
  410. 09.79@0: ( static( pname=moduler pid=136 ) local( WAITING) peer(6,ffffffff,,BADID) ) entering state READY
  411. 09.79@0: ( static( pname=moduler pid=136 ) local( READY) peer(6,ffffffff,,BADID) ) sending READY_CONFIRM message
  412. 09.79@0: ( static( pname=moduler pid=136 ) local( READY) peer(6,ffffffff,,BADID) ) flusing queue
  413. 09.79@0: ( static( pname=log pid=135 ) local( WAITING) peer(3,ffffffff,,BADID) ) entering state READY
  414. 09.79@0: ( static( pname=log pid=135 ) local( READY) peer(3,ffffffff,,BADID) ) sending READY_CONFIRM message
  415. 09.79@0: ( static( pname=log pid=135 ) local( READY) peer(3,ffffffff,,BADID) ) flusing queue
  416. 09.79@0: ( static( pname=cloudpingd pid=155 ) local( ZOMBIE) peer(133,ffffffff,,BADID) ) died in state 10 with status 0x100
  417. 09.79@0: ( static( pname=cloudpingd pid=155 ) local( ZOMBIE) peer(133,ffffffff,,BADID) ) entering state FINISHING
  418. 09.79@0: ( static( pname=cloudpingd pid=155 ) local( ZOMBIE) peer(133,ffffffff,,BADID) ) will stay in ZOMBIE (BITCH)
  419. 09.79@0: ( static( pname=macping pid=140 ) local( READY) peer(18,ffffffff,,BADID) ) entering state RUNNING
  420. 09.80@0: ( static( pname=sermgr pid=148 ) local( WAITING) peer(68,ffffffff,,BADID) ) entering state READY
  421. 09.80@0: ( static( pname=sermgr pid=148 ) local( READY) peer(68,ffffffff,,BADID) ) sending READY_CONFIRM message
  422. 09.80@0: ( static( pname=sermgr pid=148 ) local( READY) peer(68,ffffffff,,BADID) ) flusing queue
  423. 09.81@0: ( static( pname=led pid=151 ) local( WAITING) peer(118,ffffffff,,BADID) ) entering state READY
  424. 09.81@0: ( static( pname=led pid=151 ) local( READY) peer(118,ffffffff,,BADID) ) sending READY_CONFIRM message
  425. 09.81@0: ( static( pname=led pid=151 ) local( READY) peer(118,ffffffff,,BADID) ) flusing queue
  426.  
  427. @sermgr@
  428. 09.79@0: SMG: started
  429.  
  430. @loader@
  431. 09.84@2: ( static( pname=dhcpclient pid=145 ) local( WAITING) peer(43,ffffffff,,BADID) ) entering state READY
  432. 09.84@2: ( static( pname=dhcpclient pid=145 ) local( READY) peer(43,ffffffff,,BADID) ) sending READY_CONFIRM message
  433. 09.84@2: ( static( pname=dhcpclient pid=145 ) local( READY) peer(43,ffffffff,,BADID) ) flusing queue
  434. 09.84@2: ( static( pname=discover pid=137 ) local( READY) peer(10,ffffffff,,BADID) ) entering state RUNNING
  435. 09.84@2: checkForFreeMemory
  436. 09.84@2: ( static( pname=keyman ) local( DEAD) peer(65,ffffffff,,BADID) ) run! started, pid 157
  437. 09.84@2: ( static( pname=keyman pid=157 ) local( DEAD) peer(65,ffffffff,,BADID) ) entering state WAITING
  438. 09.84@2: ( static( pname=ntp pid=147 ) local( READY) peer(47,ffffffff,,BADID) ) entering state RUNNING
  439. 09.84@2: ( static( pname=mactel pid=138 ) local( READY) peer(15,ffffffff,,BADID) ) entering state RUNNING
  440.  
  441. @mactel@
  442. 09.84@2: doSet: 33554432
  443.  
  444. @ntp@
  445. 09.84@2: System precision in usec: 1 (0.000001)
  446. 09.84@2: s.precision: -20
  447. 09.84@2: Old settings were already imported
  448.  
  449. @loader@
  450. 09.87@2: ( static( pname=btest pid=143 ) local( WAITING) peer(29,ffffffff,,BADID) ) entering state READY
  451. 09.88@1: ( static( pname=btest pid=143 ) local( READY) peer(29,ffffffff,,BADID) ) sending READY_CONFIRM message
  452. 09.88@1: ( static( pname=btest pid=143 ) local( READY) peer(29,ffffffff,,BADID) ) flusing queue
  453. 09.88@1: ( static( pname=quickset pid=152 ) local( WAITING) peer(120,ffffffff,,BADID) ) entering state READY
  454. 09.88@1: ( static( pname=quickset pid=152 ) local( READY) peer(120,ffffffff,,BADID) ) sending READY_CONFIRM message
  455. 09.88@1: ( static( pname=quickset pid=152 ) local( READY) peer(120,ffffffff,,BADID) ) flusing queue
  456. 09.89@2: ( static( pname=radvd pid=144 ) local( WAITING) peer(31,ffffffff,,BADID) ) entering state READY
  457.  
  458. @btest@
  459. 09.90@2: SocketHelper-1: listen 2000
  460.  
  461. @log@
  462. 09.90@2: APP: rebuild actions
  463. 09.90@2: APP: rebuild actions
  464. 09.90@2: APP: rebuild actions
  465. 09.90@2: APP: rebuild actions
  466. 09.90@2: memory buffers get buf:memory refs:1, max:1000, stop:0
  467. 09.90@2: APP: rebuild actions
  468. 09.90@2: memory buffers get buf:memory refs:2, max:1000, stop:0
  469.  
  470. @moduler@
  471. 09.90@3: old RCBUF: 212992
  472. 09.90@3: new RCBUF: 4259840
  473.  
  474. @loader@
  475. 09.90@2: ( static( pname=radvd pid=144 ) local( READY) peer(31,ffffffff,,BADID) ) sending READY_CONFIRM message
  476.  
  477. @log@
  478. 09.90@2: APP: rebuild actions
  479. 09.90@2: memory buffers get buf:memory refs:3, max:1000, stop:0
  480.  
  481. @moduler@
  482. 09.90@3: add@/devices/platform/soc/7804000.sdhci_sd
  483. 09.90@3: SYNTH_UUID=0
  484. 09.90@3: MODALIAS=of:Nsdhci_sdT(null)Cqcom,sdhci-msm-v5
  485.  
  486. @loader@
  487. 09.90@2: ( static( pname=radvd pid=144 ) local( READY) peer(31,ffffffff,,BADID) ) flusing queue
  488.  
  489. @log@
  490. 09.90@2: APP: rebuild actions
  491. 09.90@2: APP: rebuild actions
  492.  
  493. @moduler@
  494. 09.90@3: add@/devices/platform/soc/soc:qca,scm_restart_reason
  495. 09.90@3: SYNTH_UUID=0
  496. 09.90@3: MODALIAS=of:Nqca,scm_restart_reasonT(null)Cqca,scm_restart_reason
  497.  
  498. @log@
  499. 09.90@2: memory buffers get buf:memory refs:4, max:1000, stop:0
  500.  
  501. @moduler@
  502. 09.90@3: add@/devices/platform/soc/soc:qcom,rpmsg-rpm@60000/soc:qcom,rpmsg-rpm@60000.rpm_requests.-1.-1/soc:qcom,rpm-glink:rpm-regulator-smpa2/soc:qcom,rpm-glink:rpm-regulator-smpa2:regulator-s2
  503. 09.90@3: SYNTH_UUID=0
  504. 09.90@3: DRIVER=qcom,rpm-glink-regulator
  505. 09.90@3: MODALIAS=of:Nregulator-s2T(null)Cqcom,rpm-glink-regulator
  506.  
  507. @loader@
  508. 09.90@2: ( static( pname=btest pid=143 ) local( READY) peer(29,ffffffff,,BADID) ) entering state RUNNING
  509.  
  510. @moduler@
  511. 09.90@3: add@/devices/platform/soc/b111000.apm
  512. 09.90@3: SYNTH_UUID=0
  513. 09.90@3: DRIVER=qcom,msm-apm
  514. 09.90@3: MODALIAS=of:NapmT(null)Cqcom,ipq807x-apm
  515.  
  516. @log@
  517. 09.90@2: APP: rebuild actions
  518.  
  519. @moduler@
  520. 09.90@3: add@/devices/platform/soc/78b5000.spi
  521. 09.90@3: SYNTH_UUID=0
  522. 09.90@3: DRIVER=spi_qup
  523. 09.90@3: MODALIAS=of:NspiT(null)Cqcom,spi-qup-v2.2.1
  524. 09.90@3: add@/devices/platform/reg-dummy
  525. 09.90@3: SYNTH_UUID=0
  526. 09.90@3: DRIVER=reg-dummy
  527. 09.90@3: MODALIAS=platform:reg-dummy
  528.  
  529. @log@
  530. 09.90@2: memory buffers get buf:memory refs:5, max:1000, stop:0
  531.  
  532. @moduler@
  533. 09.90@3: add@/devices/platform/soc/soc:qca,tzlog
  534. 09.90@3: SYNTH_UUID=0
  535. 09.90@3: MODALIAS=of:Nqca,tzlogT(null)Cqca,tzlog_ipq6018
  536. 09.90@3: add@/devices/platform/soc/e3000.qrng
  537. 09.90@3: SYNTH_UUID=0
  538. 09.90@3: MODALIAS=of:NqrngT(null)Cqcom,prng-ipq807x
  539.  
  540. @log@
  541. 09.90@2: APP: rebuild actions
  542.  
  543. @moduler@
  544. 09.90@3: add@/devices/platform/soc/soc:qcom,rpmsg-rpm@60000/soc:qcom,rpmsg-rpm@60000.rpm_requests.-1.-1/soc:qcom,rpm-glink:rpm-regulator-smpa2
  545. 09.90@3: SYNTH_UUID=0
  546. 09.90@3: DRIVER=qcom,rpm-glink-regulator-resource
  547. 09.90@3: MODALIAS=of:Nrpm-regulator-smpa2T(null)Cqcom,rpm-glink-regulator-resource
  548.  
  549. @log@
  550. 09.90@2: APP: rebuild actions
  551.  
  552. @moduler@
  553. 09.90@3: add@/devices/platform/soc/78b6000.spi
  554. 09.90@3: SYNTH_UUID=0
  555. 09.90@3: DRIVER=spi_qup
  556. 09.90@3: MODALIAS=of:NspiT(null)Cqcom,spi-qup-v2.2.1
  557. 09.90@3: add@/devices/platform/soc/soc:qcom,rpm-glink
  558. 09.90@3: SYNTH_UUID=0
  559. 09.90@3: MODALIAS=of:Nqcom,rpm-glinkT(null)Cqcom,rpm-glink
  560. 09.90@3: add@/devices/platform/soc/79b0000.qpic-nand
  561. 09.90@3: SYNTH_UUID=0
  562. 09.90@3: DRIVER=qcom-nandc
  563. 09.90@3: MODALIAS=of:Nqpic-nandT(null)Cqcom,ebi2-nandc-bam-v1.5.0
  564. 09.90@3: add@/devices/platform/soc/soc:qcom,smem@4AA00000
  565. 09.90@3: SYNTH_UUID=0
  566. 09.90@3: DRIVER=qcom-smem
  567. 09.90@3: MODALIAS=of:Nqcom,smemT(null)Cqcom,smem
  568. 09.90@3: add@/devices/platform/soc/soc:qcom,nss_crypto
  569. 09.90@3: SYNTH_UUID=0
  570. 09.90@3: MODALIAS=of:Nqcom,nss_cryptoT(null)Cqcom,nss-crypto
  571. 09.90@3: add@/devices/platform/soc/20000000.pci
  572. 09.90@3: SYNTH_UUID=0
  573. 09.90@3: MODALIAS=of:NpciTpciCqcom,pcie-ipq6018
  574. 09.90@3: add@/devices/platform/soc/4a8000.thermal-sensor
  575. 09.90@3: SYNTH_UUID=0
  576. 09.90@3: MODALIAS=of:Nthermal-sensorT(null)Cqcom,ipq807x-tsens
  577.  
  578. @loader@
  579. 09.91@2: ( static( pname=log pid=135 ) local( READY) peer(3,ffffffff,,BADID) ) entering state RUNNING
  580.  
  581. @moduler@
  582. 09.91@3: add@/devices/platform/soc/b111000.syscon
  583. 09.91@3: SYNTH_UUID=0
  584. 09.91@3: MODALIAS=of:NsysconT(null)Csyscon
  585. 09.91@3: add@/devices/platform/soc/1905000.syscon
  586. 09.91@3: SYNTH_UUID=0
  587. 09.91@3: MODALIAS=of:NsysconT(null)Csyscon
  588. 09.91@3: add@/devices/platform/soc/soc:extcon_usb
  589. 09.91@3: SYNTH_UUID=0
  590. 09.91@3: MODALIAS=of:Nextcon_usbT(null)Clinux,extcon-usb-gpio
  591. 09.91@3: add@/devices/platform/soc/b1b8000.clock-controller
  592. 09.91@3: SYNTH_UUID=0
  593. 09.91@3: MODALIAS=of:Nclock-controllerT(null)Cqcom,arm-cortex-acc
  594.  
  595. @sermgr@
  596. 09.91@3: SMG: enable
  597. 09.91@3: SMG: enabling
  598.  
  599. @moduler@
  600. 09.91@3: add@/devices/platform/soc/8af8800.usb30
  601. 09.91@3: SYNTH_UUID=0
  602. 09.91@3: MODALIAS=of:Nusb30T(null)Cqcom,dwc3
  603.  
  604. @loader@
  605. 09.91@2: checkForFreeMemory
  606.  
  607. @moduler@
  608. 09.91@3: add@/devices/platform/soc/soc:mailbox@b111000
  609. 09.91@3: SYNTH_UUID=0
  610. 09.91@3: DRIVER=qcom_apcs_ipc
  611. 09.91@3: MODALIAS=of:NmailboxT(null)Cqcom,msm8996-apcs-hmss-global
  612. 09.91@3: add@/devices/platform/soc/3a000000.ess-switch
  613. 09.91@3: SYNTH_UUID=0
  614. 09.91@3: MODALIAS=of:Ness-switchT(null)Cqcom,ess-switch-ipq60xx
  615. 09.91@3: add@/devices/platform/soc/soc:qcom,glink-ssr-rpm
  616. 09.91@3: SYNTH_UUID=0
  617. 09.91@3: MODALIAS=of:Nqcom,glink-ssr-rpmT(null)Cqcom,glink_ssr
  618. 09.91@3: add@/devices/platform/soc/7a00000.ess-uniphy
  619. 09.91@3: SYNTH_UUID=0
  620. 09.91@3: MODALIAS=of:Ness-uniphyT(null)Cqcom,ess-uniphy
  621. 09.91@3: add@/devices/platform/soc/b198000.clock-controller
  622. 09.91@3: SYNTH_UUID=0
  623. 09.91@3: MODALIAS=of:Nclock-controllerT(null)Cqcom,arm-cortex-acc
  624. 09.91@3: add@/devices/platform/soc/soc:qcom,ipc_router_modem_xprt
  625. 09.91@3: SYNTH_UUID=0
  626. 09.91@3: MODALIAS=of:Nqcom,ipc_router_modem_xprtT(null)Cqcom,ipc_router_glink_xprt
  627. 09.91@3: add@/devices/platform/soc/soc:hwlock@1905000
  628. 09.91@3: SYNTH_UUID=0
  629. 09.91@3: DRIVER=qcom_hwspinlock
  630. 09.91@3: MODALIAS=of:NhwlockT(null)Cqcom,tcsr-mutex
  631. 09.91@3: add@/devices/platform/soc/b111000.qcom,apss_clk
  632. 09.91@3: SYNTH_UUID=0
  633. 09.91@3: DRIVER=qcom,apss-ipq6018
  634. 09.91@3: MODALIAS=of:Nqcom,apss_clkT(null)Cqcom,apss-ipq6018
  635. 09.91@3: add@/devices/platform/Fixed MDIO bus.0
  636. 09.91@3: SYNTH_UUID=0
  637. 09.91@3: MODALIAS=platform:Fixed MDIO bus
  638. 09.91@3: add@/devices/platform/soc
  639. 09.91@3: SYNTH_UUID=0
  640. 09.91@3: MODALIAS=of:NsocT(null)Csimple-bus
  641. 09.91@3: add@/devices/platform/soc/soc:qcom,sps
  642. 09.91@3: SYNTH_UUID=0
  643. 09.91@3: MODALIAS=of:Nqcom,spsT(null)Cqcom,msm_sps_4k
  644. 09.91@3: add@/devices/platform/soc/73a000.crypto
  645. 09.91@3: SYNTH_UUID=0
  646. 09.91@3: MODALIAS=of:NcryptoT(null)Cqcom,crypto-v5.1
  647. 09.91@3: add@/devices/platform/leds
  648. 09.91@3: SYNTH_UUID=0
  649. 09.91@3: DRIVER=leds-rb
  650. 09.91@3: MODALIAS=of:NledsT(null)Cleds-rb
  651. 09.91@3: add@/devices/platform/psci
  652. 09.91@3: SYNTH_UUID=0
  653. 09.91@3: MODALIAS=of:NpsciT(null)Carm,psci-1.0
  654. 09.91@3: add@/devices/platform/soc/b1a8000.clock-controller
  655. 09.91@3: SYNTH_UUID=0
  656. 09.91@3: MODALIAS=of:Nclock-controllerT(null)Cqcom,arm-cortex-acc
  657. 09.91@3: add@/devices/platform/soc/b018000.cpr4-ctrl
  658. 09.91@3: SYNTH_UUID=0
  659. 09.91@3: DRIVER=qcom,cpr4-apss-regulator
  660. 09.91@3: MODALIAS=of:Ncpr4-ctrlT(null)Cqcom,cpr4-ipq6018-apss-regulator
  661. 09.91@3: add@/devices/platform/soc/7884000.dma
  662. 09.91@3: SYNTH_UUID=0
  663. 09.91@3: DRIVER=bam-dma-engine
  664. 09.91@3: MODALIAS=of:NdmaT(null)Cqcom,bam-v1.7.0
  665. 09.91@3: add@/devices/platform/soc/4aa00000.qcom,glink-smem-native-xprt-modem
  666. 09.91@3: SYNTH_UUID=0
  667. 09.91@3: MODALIAS=of:Nqcom,glink-smem-native-xprt-modemT(null)Cqcom,glink-smem-native-xprt
  668. 09.91@3: add@/devices/platform/soc/b188000.clock-controller
  669. 09.91@3: SYNTH_UUID=0
  670. 09.91@3: MODALIAS=of:Nclock-controllerT(null)Cqcom,arm-cortex-acc
  671. 09.91@3: add@/devices/platform/soc/soc:gpio_keys
  672. 09.91@3: SYNTH_UUID=0
  673. 09.91@3: MODALIAS=of:Ngpio_keysT(null)Cgpio-keys
  674. 09.91@3: add@/devices/platform/soc/b017000.watchdog
  675. 09.91@3: SYNTH_UUID=0
  676. 09.91@3: DRIVER=qcom_wdt
  677. 09.91@3: MODALIAS=of:NwatchdogT(null)Cqcom,kpss-wdt-ipq6018
  678. 09.91@3: add@/devices/platform/soc/3a001400.dp2
  679. 09.91@3: SYNTH_UUID=0
  680. 09.91@3: MODALIAS=of:Ndp2TnetworkCqcom,nss-dp
  681. 09.91@3: add@/devices/platform/firmware:qfprom
  682. 09.91@3: SYNTH_UUID=0
  683. 09.91@3: MODALIAS=of:NqfpromT(null)Cqcom,qfprom-sec
  684. 09.91@3: add@/devices/platform/soc/1800000.gcc
  685. 09.91@3: SYNTH_UUID=0
  686. 09.91@3: DRIVER=qcom,gcc-ipq6018
  687. 09.91@3: MODALIAS=of:NgccT(null)Cqcom,gcc-ipq6018
  688. 09.91@3: add@/devices/platform/soc/soc:q6v5_m3
  689. 09.91@3: SYNTH_UUID=0
  690. 09.91@3: MODALIAS=of:Nq6v5_m3T(null)Cqca,q6v5-m3-rproc
  691. 09.91@3: add@/devices/platform/soc/60000.qcom,glink-rpm-native-xprt
  692. 09.91@3: SYNTH_UUID=0
  693. 09.91@3: MODALIAS=of:Nqcom,glink-rpm-native-xprtT(null)Cqcom,glink-rpm-native-xprt
  694.  
  695. @loader@
  696. 09.91@2: ( static( pname=modprobed ) local( DEAD) peer(128,ffffffff,,BADID) ) run! started, pid 159
  697.  
  698. @moduler@
  699. 09.91@3: add@/devices/platform/soc/3a001600.dp1
  700. 09.91@3: SYNTH_UUID=0
  701. 09.91@3: MODALIAS=of:Ndp1TnetworkCqcom,nss-dp
  702. 09.91@3: add@/devices/platform/soc/78b7000.i2c
  703. 09.91@3: SYNTH_UUID=0
  704. 09.91@3: DRIVER=i2c_qup
  705. 09.91@3: MODALIAS=of:Ni2cT(null)Cqcom,i2c-qup-v2.2.1
  706.  
  707. @loader@
  708. 09.91@2: ( static( pname=modprobed pid=159 ) local( DEAD) peer(128,ffffffff,,BADID) ) entering state WAITING
  709.  
  710. @moduler@
  711. 09.91@3: add@/devices/platform/soc/7984000.dma
  712. 09.91@3: SYNTH_UUID=0
  713. 09.91@3: DRIVER=bam-dma-engine
  714. 09.91@3: MODALIAS=of:NdmaT(null)Cqcom,bam-v1.7.0
  715. 09.91@3: add@/devices/platform/soc/c000000.wifiCP
  716. 09.91@3: SYNTH_UUID=0
  717. 09.91@3: MODALIAS=of:NwifiCPT(null)Cqcom,cnss-qca6018Cqcom,ipq6018-wifi
  718.  
  719. @loader@
  720. 09.92@2: ( static( pname=radvd pid=144 ) local( READY) peer(31,ffffffff,,BADID) ) entering state RUNNING
  721. 09.92@2: checkForFreeMemory
  722. 09.92@2: ( static( pname=resolver ) local( DEAD) peer(14,ffffffff,,BADID) ) run! started, pid 161
  723.  
  724. @moduler@
  725. 09.92@3: Memory total: 945815552(902M)
  726. 09.92@3: detected CPU: "ipq6018"
  727. 09.92@3: Succesfully created directory /ram/lib/
  728. 09.92@3: Succesfully created directory /ram/lib/firmware/
  729. 09.92@3: Succesfully created directory /ram/lib/firmware//internal/
  730.  
  731. @loader@
  732. 09.92@2: ( static( pname=resolver pid=161 ) local( DEAD) peer(14,ffffffff,,BADID) ) entering state WAITING
  733. 09.93@2: ( static( pname=modprobed pid=159 ) local( WAITING) peer(128,ffffffff,,BADID) ) entering state READY
  734. 09.93@2: ( static( pname=modprobed pid=159 ) local( READY) peer(128,ffffffff,,BADID) ) sending READY_CONFIRM message
  735. 09.93@2: ( static( pname=modprobed pid=159 ) local( READY) peer(128,ffffffff,,BADID) ) flusing queue
  736.  
  737. @diskd@
  738. 09.93@0: run
  739.  
  740. @loader@
  741. 09.93@2: ( static( pname=diskd pid=149 ) local( READY) peer(79,ffffffff,,BADID) ) entering state RUNNING
  742.  
  743. @cloud@
  744. 09.94@2: =============
  745. 09.94@2: Starting cloud...
  746.  
  747. @loader@
  748. 09.94@2: ( static( pname=cloud pid=153 ) local( WAITING) peer(123,ffffffff,,BADID) ) entering state READY
  749. 09.94@2: ( static( pname=cloud pid=153 ) local( READY) peer(123,ffffffff,,BADID) ) sending READY_CONFIRM message
  750. 09.94@2: ( static( pname=cloud pid=153 ) local( READY) peer(123,ffffffff,,BADID) ) flusing queue
  751. 09.96@1: ( static( pname=mproxy pid=134 ) local( WAITING) peer(2,ffffffff,,BADID) ) entering state READY
  752. 09.96@1: ( static( pname=mproxy pid=134 ) local( READY) peer(2,ffffffff,,BADID) ) sending READY_CONFIRM message
  753. 09.96@1: ( static( pname=mproxy pid=134 ) local( READY) peer(2,ffffffff,,BADID) ) flusing queue
  754. 09.97@1: ( static( pname=bridge2 pid=139 ) local( WAITING) peer(16,ffffffff,,BADID) ) entering state READY
  755. 09.97@1: ( static( pname=bridge2 pid=139 ) local( READY) peer(16,ffffffff,,BADID) ) sending READY_CONFIRM message
  756. 09.97@1: ( static( pname=bridge2 pid=139 ) local( READY) peer(16,ffffffff,,BADID) ) flusing queue
  757.  
  758. @moduler@
  759. 09.97@1: add@/devices/platform/soc/79b0000.qpic-nand/mtd/mtd0/mtdblock0
  760. 09.97@1: SYNTH_UUID=0
  761. 09.97@1: MAJOR=31
  762. 09.97@1: MINOR=0
  763. 09.97@1: DEVNAME=mtdblock0
  764. 09.97@1: DEVTYPE=disk
  765. 09.97@1: notify 79
  766. 09.97@1: add@/devices/platform/soc/79b0000.qpic-nand/mtd/mtd1/mtdblock1
  767. 09.97@1: SYNTH_UUID=0
  768. 09.97@1: MAJOR=31
  769. 09.97@1: MINOR=1
  770. 09.97@1: DEVNAME=mtdblock1
  771. 09.97@1: DEVTYPE=disk
  772. 09.97@1: notify 79
  773. 09.97@1: add@/devices/platform/soc/78b5000.spi/spi_master/spi0/spi0.0/mtd/mtd2/mtdblock2
  774. 09.97@1: SYNTH_UUID=0
  775.  
  776. @cloud@
  777. 09.98@2: (AUTOTIME) start enabled
  778.  
  779. @moduler@
  780. 09.98@1: MAJOR=31
  781. 09.98@1: MINOR=2
  782. 09.98@1: DEVNAME=mtdblock2
  783. 09.98@1: DEVTYPE=disk
  784. 09.98@1: notify 79
  785. 09.98@1: add@/devices/virtual/block/loop0
  786. 09.98@1: notify 79
  787. 09.98@1: add@/devices/virtual/block/loop1
  788. 09.98@1: notify 79
  789. 09.98@1: add@/devices/platform/soc/soc:qcom,diag@0
  790. 09.98@1: SYNTH_UUID=0
  791. 09.98@1: MODALIAS=of:Nqcom,diagT(null)Cqcom,diag
  792. 09.98@1: add@/devices/platform/soc/soc:mailboxrpm@b111000
  793. 09.98@1: SYNTH_UUID=0
  794. 09.98@1: DRIVER=qcom_apcs_ipc
  795. 09.98@1: MODALIAS=of:NmailboxrpmT(null)Cqcom,msm8996-apcs-hmss-global
  796.  
  797. @loader@
  798. 09.98@0: ( static( pname=watchdog pid=154 ) local( WAITING) peer(129,ffffffff,,BADID) ) entering state READY
  799. 09.98@0: ( static( pname=watchdog pid=154 ) local( READY) peer(129,ffffffff,,BADID) ) sending READY_CONFIRM message
  800. 09.98@0: ( static( pname=watchdog pid=154 ) local( READY) peer(129,ffffffff,,BADID) ) flusing queue
  801.  
  802. @moduler@
  803. 09.98@1: add@/devices/platform/poe_out_simple
  804. 09.98@1: SYNTH_UUID=0
  805. 09.98@1: MODALIAS=of:Npoe_out_simpleT(null)Crb,poe-out-simple
  806.  
  807. @sermgr@
  808. 09.98@0: SMG: enable
  809. 09.98@0: SMG: enabling
  810. 09.98@0: SMG: enable
  811. 09.98@0: SMG: enabling
  812. 09.98@0: SMG: enable
  813. 09.98@0: SMG: enabling remote
  814.  
  815. @loader@
  816. 09.98@0: checkForFreeMemory
  817.  
  818. @moduler@
  819. 09.98@1: add@/devices/platform/soc/84000.phy
  820. 09.98@1: SYNTH_UUID=0
  821.  
  822. @loader@
  823. 09.98@0: ( static( pname=www ) local( DEAD) peer(70,ffffffff,,BADID) ) run! started, pid 162
  824. 09.98@0: ( static( pname=www pid=162 ) local( DEAD) peer(70,ffffffff,,BADID) ) entering state WAITING
  825.  
  826. @moduler@
  827. 09.98@1: DRIVER=pcie-phy
  828. 09.98@1: MODALIAS=of:NphyT(null)Cqca,pcie-qmp-phy-gen3
  829. 09.98@1: add@/devices/platform/soc/soc:timer
  830. 09.98@1: SYNTH_UUID=0
  831. 09.98@1: MODALIAS=of:NtimerT(null)Carm,armv8-timer
  832. 09.98@1: add@/devices/platform/soc/8b04000.qcom,usbbam
  833. 09.98@1: SYNTH_UUID=0
  834. 09.98@1: MODALIAS=of:Nqcom,usbbamT(null)Cqcom,usb-bam-msm
  835. 09.98@1: add@/devices/platform/soc/cd00000.q6v5_wcss
  836. 09.98@1: SYNTH_UUID=0
  837. 09.98@1: MODALIAS=of:Nq6v5_wcssT(null)Cqca,q6v5-wcss-rproc-ipq60xx
  838. 09.99@1: add@/devices/platform/soc/1868010.nss-common
  839. 09.99@1: SYNTH_UUID=0
  840. 09.99@1: MODALIAS=of:Nnss-commonT(null)Cqcom,nss-common
  841. 09.99@1: add@/devices/platform/soc/1945000.syscon
  842. 09.99@1: SYNTH_UUID=0
  843. 09.99@1: MODALIAS=of:NsysconT(null)Csyscon
  844. 09.99@1: add@/devices/platform/soc/cd00000.qcom_q6v5_wcss
  845. 09.99@1: SYNTH_UUID=0
  846. 09.99@1: MODALIAS=of:Nqcom_q6v5_wcssT(null)Cqcom,ipq60xx-wcss-pil
  847. 09.99@1: add@/devices/platform/soc/7808000.sdcc1ice
  848. 09.99@1: SYNTH_UUID=0
  849. 09.99@1: MODALIAS=of:Nsdcc1iceT(null)Cqcom,ice
  850. 09.99@1: add@/devices/platform/soc/soc:qcom,rpmsg-rpm@60000/soc:qcom,rpmsg-rpm@60000.rpm_requests.-1.-1/soc:qcom,rpm-glink:rpm-regulator-ldoa2
  851. 09.99@1: SYNTH_UUID=0
  852. 09.99@1: DRIVER=qcom,rpm-glink-regulator-resource
  853. 09.99@1: MODALIAS=of:Nrpm-regulator-ldoa2T(null)Cqcom,rpm-glink-regulator-resource
  854. 09.99@1: add@/devices/platform/soc/3ab00000.edma
  855. 09.99@1: SYNTH_UUID=0
  856. 09.99@1: MODALIAS=of:NedmaT(null)Cqcom,edma
  857. 09.99@1: add@/devices/platform/cpufreq-dt
  858. 09.99@1: SYNTH_UUID=0
  859. 09.99@1: DRIVER=cpufreq-dt
  860. 09.99@1: MODALIAS=platform:cpufreq-dt
  861. 09.99@1: add@/devices/platform/pmu
  862. 09.99@1: SYNTH_UUID=0
  863. 09.99@1: DRIVER=armv8-pmu
  864. 09.99@1: MODALIAS=of:NpmuT(null)Carm,armv8-pmuv3
  865. 09.99@1: add@/devices/platform/soc/79000.qusb
  866. 09.99@1: SYNTH_UUID=0
  867. 09.99@1: MODALIAS=of:NqusbT(null)Cqcom,qusb2phy
  868. 09.99@1: add@/devices/platform/soc/8600000.qcom,msm-imem
  869. 09.99@1: SYNTH_UUID=0
  870. 09.99@1: MODALIAS=of:Nqcom,msm-imemT(null)Cqcom,msm-imem
  871. 09.99@1: add@/devices/platform/soc/39000000.nss
  872. 09.99@1: SYNTH_UUID=0
  873. 09.99@1: MODALIAS=of:NnssT(null)Cqcom,nss
  874. 09.99@1: add@/devices/platform/soc/soc:smp2p-wcss
  875. 09.99@1: SYNTH_UUID=0
  876. 09.99@1: DRIVER=qcom_smp2p
  877. 09.99@1: MODALIAS=of:Nsmp2p-wcssT(null)Cqcom,smp2p
  878. 09.99@1: add@/devices/platform/soc/1000000.pinctrl
  879. 09.99@1: SYNTH_UUID=0
  880. 09.99@1: DRIVER=ipq6018-pinctrl
  881. 09.99@1: MODALIAS=of:NpinctrlT(null)Cqcom,ipq6018-pinctrl
  882. 10.00@1: add@/devices/platform/firmware:scm
  883. 10.00@1: SYNTH_UUID=0
  884. 10.00@1: DRIVER=qcom_scm
  885. 10.00@1: MODALIAS=of:NscmT(null)Cqcom,scm-ipq6018
  886. 10.00@1: add@/devices/platform/soc/soc:qcom,rpmsg-rpm@60000/soc:qcom,rpmsg-rpm@60000.rpm_requests.-1.-1/soc:qcom,rpm-glink:rpm-regulator-ldoa2/soc:qcom,rpm-glink:rpm-regulator-ldoa2:regulator-l2
  887. 10.00@1: SYNTH_UUID=0
  888. 10.00@1: DRIVER=qcom,rpm-glink-regulator
  889. 10.00@1: MODALIAS=of:Nregulator-l2T(null)Cqcom,rpm-glink-regulator
  890. 10.00@1: add@/devices/platform/soc/78000.ssphy
  891. 10.00@1: SYNTH_UUID=0
  892. 10.00@1: MODALIAS=of:NssphyT(null)Cqcom,usb-ssphy-qmp
  893. 10.00@1: add@/devices/platform/soc/90000.mdio
  894. 10.00@1: SYNTH_UUID=0
  895. 10.00@1: MODALIAS=of:NmdioT(null)Cqcom,qca-mdioCqcom,ipq40xx-mdio
  896. 10.00@1: add@/devices/platform/soc/soc:qcom,ipc_router
  897. 10.00@1: SYNTH_UUID=0
  898. 10.00@1: DRIVER=ipc_router
  899. 10.00@1: MODALIAS=of:Nqcom,ipc_routerT(null)Cqcom,ipc_router
  900. 10.00@1: add@/devices/platform/soc/soc:qcom,glink-ssr-modem
  901. 10.00@1: SYNTH_UUID=0
  902. 10.00@1: MODALIAS=of:Nqcom,glink-ssr-modemT(null)Cqcom,glink_ssr
  903. 10.00@1: add@/devices/platform/soc/8af8000.dbm
  904. 10.00@1: SYNTH_UUID=0
  905. 10.00@1: MODALIAS=of:NdbmT(null)Cqcom,usb-dbm-1p5
  906. 10.00@1: add@/devices/platform/soc/soc:qcom,rpmsg-rpm@60000
  907. 10.00@1: SYNTH_UUID=0
  908. 10.00@1: DRIVER=qcom_glink_rpm
  909. 10.00@1: MODALIAS=of:Nqcom,rpmsg-rpmT(null)Cqcom,glink-rpm
  910. 10.00@1: add@/devices/platform/soc/78b5000.spi/spi_master/spi0/spi0.0
  911. 10.00@1: SYNTH_UUID=0
  912. 10.00@1: DRIVER=spi-nor
  913. 10.00@1: MODALIAS=spi:m25p80
  914. 10.00@1: add@/devices/platform/soc/78b6000.spi/spi_master/spi1/spi1.0
  915. 10.00@1: SYNTH_UUID=0
  916. 10.00@1: MODALIAS=spi:spi-nRF52832
  917. 10.00@1: add@/devices/platform/soc/soc:qcom,rpmsg-rpm@60000/soc:qcom,rpmsg-rpm@60000.rpm_requests.-1.-1
  918. 10.00@1: SYNTH_UUID=0
  919. 10.00@1: DRIVER=rpm-rpmsg
  920. 10.01@1: MODALIAS=of:Nglink_edgeT(null)
  921. 10.01@1: add@/devices/platform/soc/soc:qcom,rpmsg-rpm@60000/soc:qcom,rpmsg-rpm@60000.glink_ssr.-1.-1
  922. 10.01@1: SYNTH_UUID=0
  923. 10.01@1: MODALIAS=rpmsg:glink_ssr
  924. 10.01@1: add@/devices/platform/soc/1000000.pinctrl/gpiochip0/gpio/mpcie-power-off
  925. 10.01@1: SYNTH_UUID=0
  926. 10.01@1: add@/devices/platform/soc/1000000.pinctrl/gpiochip0/gpio/lte-reset
  927. 10.01@1: SYNTH_UUID=0
  928. 10.01@1: add@/devices/platform/soc/1000000.pinctrl/gpiochip0/gpio/poe-led
  929. 10.01@1: SYNTH_UUID=0
  930. 10.01@1: add@/devices/platform/soc/1000000.pinctrl/gpiochip0/gpio/system-led:blue
  931. 10.01@1: SYNTH_UUID=0
  932. 10.01@1: add@/devices/platform/soc/1000000.pinctrl/gpiochip0/gpio/system-led:green
  933. 10.01@1: SYNTH_UUID=0
  934.  
  935. @loader@
  936. 10.01@0: could not find destination 144
  937. 10.01@0: request to reply with error to NON-REQUEST message
  938. 10.01@0: could not find destination 144
  939. 10.01@0: request to reply with error to NON-REQUEST message
  940. 10.01@0: could not find destination 144
  941. 10.01@0: request to reply with error to NON-REQUEST message
  942. 10.01@0: could not find destination 144
  943. 10.01@0: request to reply with error to NON-REQUEST message
  944. 10.01@0: could not find destination 144
  945. 10.01@0: request to reply with error to NON-REQUEST message
  946.  
  947. @moduler@
  948. 10.01@1: add@/devices/platform/soc/1000000.pinctrl/gpiochip0/gpio/system-led:red
  949. 10.01@1: SYNTH_UUID=0
  950. 10.01@1: add@/devices/platform/soc/1000000.pinctrl/gpio/gpiochip0
  951. 10.01@1: SYNTH_UUID=0
  952. 10.01@1: add@/devices/platform/soc/1000000.pinctrl/gpiochip0/gpio/button
  953. 10.01@1: SYNTH_UUID=0
  954. 10.01@1: add@/devices/platform/soc/1000000.pinctrl/gpiochip0/gpio/usb-power-off
  955. 10.01@1: SYNTH_UUID=0
  956. 10.01@1: add@/devices/platform/soc/1000000.pinctrl/gpiochip0/gpio/mode-button
  957. 10.01@1: SYNTH_UUID=0
  958.  
  959. @loader@
  960. 10.01@0: ( static( pname=moduler pid=136 ) local( READY) peer(6,ffffffff,,BADID) ) entering state RUNNING
  961. 10.01@0: could not find destination 144
  962. 10.01@0: request to reply with error to NON-REQUEST message
  963. 10.01@0: could not find destination 144
  964. 10.01@0: request to reply with error to NON-REQUEST message
  965. 10.01@0: could not find destination 144
  966. 10.01@0: request to reply with error to NON-REQUEST message
  967. 10.01@0: could not find destination 144
  968. 10.01@0: request to reply with error to NON-REQUEST message
  969. 10.01@0: could not find destination 144
  970. 10.01@0: request to reply with error to NON-REQUEST message
  971. 10.02@2: ( static( pname=keyman pid=157 ) local( WAITING) peer(65,ffffffff,,BADID) ) entering state READY
  972. 10.02@2: ( static( pname=keyman pid=157 ) local( READY) peer(65,ffffffff,,BADID) ) sending READY_CONFIRM message
  973. 10.02@2: ( static( pname=keyman pid=157 ) local( READY) peer(65,ffffffff,,BADID) ) flusing queue
  974. 10.02@2: ( static( pname=cloud pid=153 ) local( READY) peer(123,ffffffff,,BADID) ) entering state RUNNING
  975. 10.02@2: ( static( pname=keyman pid=157 ) local( READY) peer(65,ffffffff,,BADID) ) entering state RUNNING
  976. 10.02@2: ( static( pname=keyman pid=157 ) local( RUNNING) peer(65,ffffffff,,BADID) )SETUP timeout to:1000
  977. 10.02@2: checkForFreeMemory
  978.  
  979. @bridge2@
  980. 10.02@2: about to init
  981. 10.02@2: CC: start
  982. 10.02@2: ASecMap[2]: store does not have ORDER_ID
  983.  
  984. @cloud@
  985. 10.02@2: (AUTOTIME)[WARN] NTP/SNTP enabled overrides
  986.  
  987. @loader@
  988. 10.02@2: ( static( pname=watchdog pid=154 ) local( READY) peer(129,ffffffff,,BADID) ) entering state RUNNING
  989.  
  990. @dhcpclient@
  991. 10.03@2: loaded DUID: 0003000148a98ac1ac58
  992. 10.03@2: ClientHandler::init()
  993. 10.03@2: link setup 1
  994. 10.03@2: client added
  995. 10.03@2: --active--
  996. 10.03@2: ClientHandler::init() done, 1 clients
  997. 10.03@2: AlertHandler::init()
  998. 10.03@2: AlertHandler::init() done, 0 entries
  999. 10.03@2: Client6Handler::init()
  1000.  
  1001. @log@
  1002. 10.03@2: REC 9: ready
  1003. 10.04@2: REC 9: 1 subscribe system,info
  1004.  
  1005. @led@
  1006. 10.04@0: cAPGi-5HaxD2HaxD, cAP ax, cap-cp
  1007. 10.04@0: board config found: 40c178ff5b1376cfa83c1e763ab74643e759e992
  1008. 10.04@0: trigger: 10 poe-led
  1009. 10.04@0: system triggers: [none] dark-mode-trigger timer default-on group0.0 group0.1 group0.2 group0.3 group0.4 group0.5 group0.6 group0.7 group1.0 group1.1 group1.2 group1.3 group1.4 group1.5 group1.6 group1.7 group2.0 group2.1 group2.2 group2.3 group2.4 group2.5 group2.6 group2.7 group3.0 group3.1 group3.2 group3.3 group3.4 group3.5 group3.6 group3.7
  1010. 10.04@0: +poe-led 255
  1011. 10.04@0: trigger: poe-out for led: poe-led not ready
  1012.  
  1013. @loader@
  1014. 10.05@0: ( static( pname=led pid=151 ) local( READY) peer(118,ffffffff,,BADID) ) entering state RUNNING
  1015. 10.05@0: could not find destination 58
  1016. 10.05@0: request to reply with error to NON-REQUEST message
  1017. 10.14@0: ( static( pname=resolver pid=161 ) local( WAITING) peer(14,ffffffff,,BADID) ) entering state READY
  1018. 10.14@0: ( static( pname=resolver pid=161 ) local( READY) peer(14,ffffffff,,BADID) ) sending READY_CONFIRM message
  1019. 10.14@0: ( static( pname=resolver pid=161 ) local( READY) peer(14,ffffffff,,BADID) ) flusing queue
  1020. 10.14@0: ( static( pname=www pid=162 ) local( WAITING) peer(70,ffffffff,,BADID) ) entering state READY
  1021. 10.14@0: ( static( pname=www pid=162 ) local( READY) peer(70,ffffffff,,BADID) ) sending READY_CONFIRM message
  1022. 10.14@0: ( static( pname=www pid=162 ) local( READY) peer(70,ffffffff,,BADID) ) flusing queue
  1023. 10.14@0: ( static( pname=modprobed pid=159 ) local( READY) peer(128,ffffffff,,BADID) ) entering state RUNNING
  1024.  
  1025. @syslog@
  1026. 10.17@0: [ 10.178575] qcom-pcie 20000000.pci: GPIO lookup for consumer booster
  1027. 10.17@0: [ 10.178610] qcom-pcie 20000000.pci: using device tree for GPIO lookup
  1028. 10.17@0: [ 10.178643] of_get_named_gpiod_flags: can't parse 'booster-gpios' property of node '/soc/pci@20000000[0]'
  1029. 10.17@0: [ 10.178669] of_get_named_gpiod_flags: can't parse 'booster-gpio' property of node '/soc/pci@20000000[0]'
  1030. 10.17@0: [ 10.178686] qcom-pcie 20000000.pci: using lookup tables for GPIO lookup
  1031. 10.17@0: [ 10.178699] qcom-pcie 20000000.pci: No GPIO consumer booster found
  1032. 10.17@0: [ 10.178713] qcom-pcie 20000000.pci: GPIO lookup for consumer pwr
  1033. 10.17@0: [ 10.178724] qcom-pcie 20000000.pci: using device tree for GPIO lookup
  1034. 10.17@0: [ 10.178760] of_get_named_gpiod_flags: parsed 'pwr-gpios' property of node '/soc/pci@20000000[0]' - status (0)
  1035. 10.17@0: [ 10.178775] gpio-35 (mpcie-power-off): gpiod_request: status -16
  1036. 10.17@0: [ 10.178873] qcom-pcie 20000000.pci: 20000000.pci supply vdda not found, using dummy regulator
  1037. 10.17@0: [ 10.178910] qcom-pcie 20000000.pci: 20000000.pci supply vdda_phy not found, using dummy regulator
  1038. 10.17@0: [ 10.178940] qcom-pcie 20000000.pci: 20000000.pci supply vdda_refclk not found, using dummy regulator
  1039. 10.17@0: [ 10.179098] qcom-pcie 20000000.pci: host bridge /soc/pci@20000000 ranges:
  1040. 10.17@0: [ 10.179143] qcom-pcie 20000000.pci: IO 0x0020200000..0x00202fffff -> 0x0020200000
  1041. 10.17@0: [ 10.179171] qcom-pcie 20000000.pci: MEM 0x0020300000..0x00302fffff -> 0x0020300000
  1042.  
  1043. @resolver@
  1044. 10.17@0: udpate servers 0 [] []
  1045.  
  1046. @www@
  1047. 10.17@1: adding server www-ssl, ssl=1
  1048. 10.17@1: Server-0xf7ee2190-port:0-fd:-1-secure:1: adding servlet jsproxy, path=/jsproxy
  1049. 10.17@1: Server-0xf7ee2190-port:0-fd:-1-secure:1: adding servlet remote, path=/graphs
  1050. 10.17@1: Server-0xf7ee2190-port:0-fd:-1-secure:1: adding servlet index, path=/
  1051. 10.17@1: Server-0xf7ee2190-port:0-fd:-1-secure:1: adding servlet dir, path=/
  1052. 10.17@1: Server-0xf7ee2190-port:0-fd:-1-secure:1: adding servlet dir, path=/img/
  1053. 10.17@1: Server-0xf7ee2190-port:0-fd:-1-secure:1: adding servlet dir, path=/webfig/list
  1054. 10.17@1: Server-0xf7ee2190-port:0-fd:-1-secure:1: adding servlet dir, path=/webfig/
  1055. 10.17@1: Server-0xf7ee2190-port:0-fd:-1-secure:1: adding servlet rest, path=/rest
  1056. 10.17@1: adding server www, ssl=0
  1057. 10.17@1: Server-0xf7ee2710-port:0-fd:-1-secure:0: adding servlet index, path=/
  1058. 10.17@1: Server-0xf7ee2710-port:0-fd:-1-secure:0: adding servlet jsproxy, path=/jsproxy
  1059. 10.17@1: Server-0xf7ee2710-port:0-fd:-1-secure:0: adding servlet dir, path=/img/
  1060. 10.17@1: Server-0xf7ee2710-port:0-fd:-1-secure:0: adding servlet dir, path=/doc/
  1061. 10.17@1: Server-0xf7ee2710-port:0-fd:-1-secure:0: adding servlet dir, path=/help/
  1062. 10.17@1: Server-0xf7ee2710-port:0-fd:-1-secure:0: adding servlet dir, path=/webfig/list
  1063. 10.17@1: Server-0xf7ee2710-port:0-fd:-1-secure:0: adding servlet dir, path=/webfig/
  1064. 10.17@1: Server-0xf7ee2710-port:0-fd:-1-secure:0: adding servlet rest, path=/rest
  1065. 10.17@1: Server-0xf7ee2710-port:0-fd:-1-secure:0: adding servlet winbox, path=/winbox
  1066. 10.17@1: Server-0xf7ee2710-port:0-fd:-1-secure:0: adding servlet remote, path=/graphs
  1067. 10.17@1: Server-0xf7ee2710-port:0-fd:-1-secure:0: adding servlet dir, path=/winbox/
  1068. 10.17@1: Server-0xf7ee2710-port:0-fd:-1-secure:0: adding servlet dir, path=/
  1069. 10.17@1: Server-0xf7ee2710-port:0-fd:-1-secure:0: adding servlet dir, path=/crl
  1070. 10.17@1: Server-0xf7ee2710-port:0-fd:-1-secure:0: adding servlet remote, path=/scep
  1071. 10.17@1: Server-0xf7ee2710-port:0-fd:-1-secure:0: adding servlet pubdir, path=/files
  1072. 10.17@1: Server-0xf7ee2710-port:0-fd:-1-secure:0: adding servlet remote, path=/.well-known/acme-challenge
  1073. 10.17@1: set www enabled=1 port=80
  1074. 10.17@1: Server-0xf7ee2710-port:80-fd:-1-secure:0: rebind enabled:1 allowedFrom:[]
  1075. 10.17@1: Server-0xf7ee2710-port:80-fd:-1-secure:0: creating tcp socket on port 80
  1076. 10.17@1: Server-0xf7ee2710-port:80-fd:4-secure:0: using inet6
  1077.  
  1078. @ww2@
  1079. 10.18@0: ww2
  1080.  
  1081. @resolver@
  1082. 10.18@0: run
  1083.  
  1084. @loader@
  1085. 10.18@0: ( static( pname=sys2 pid=142 ) local( WAITING) peer(24,ffffffff,,BADID) ) entering state READY
  1086. 10.18@0: ( static( pname=sys2 pid=142 ) local( READY) peer(24,ffffffff,,BADID) ) sending READY_CONFIRM message
  1087. 10.18@0: ( static( pname=sys2 pid=142 ) local( READY) peer(24,ffffffff,,BADID) ) flusing queue
  1088. 10.18@0: ( static( pname=www pid=162 ) local( READY) peer(70,ffffffff,,BADID) ) entering state RUNNING
  1089. 10.18@0: ( static( pname=resolver pid=161 ) local( READY) peer(14,ffffffff,,BADID) ) entering state RUNNING
  1090. 10.18@0: ( static( pname=ww2 pid=156 ) local( WAITING) peer(138,ffffffff,,BADID) ) entering state READY
  1091. 10.18@0: ( static( pname=ww2 pid=156 ) local( READY) peer(138,ffffffff,,BADID) ) sending READY_CONFIRM message
  1092. 10.18@0: ( static( pname=ww2 pid=156 ) local( READY) peer(138,ffffffff,,BADID) ) flusing queue
  1093.  
  1094. @sermgr@
  1095. 1970.01.02-00:00:10.00@0: SMG: enable
  1096. 1970.01.02-00:00:10.00@0: SMG: enabling
  1097. 1970.01.02-00:00:10.00@0: SMG: enable
  1098. 1970.01.02-00:00:10.00@0: SMG: enabling remote
  1099.  
  1100. @ww2@
  1101. 1970.01.02-00:00:10.00@0: 1st stat("/ram/ww2.dflags") = -1, errno = 2, No such file or directory
  1102.  
  1103. @syslog@
  1104. 2023.12.24-19:15:49.00@3: [ 10.201596] Initializing XFRM netlink socket
  1105. 2023.12.24-19:15:49.00@3: [ 10.203203] NET: Registered protocol family 15
  1106.  
  1107. @loader@
  1108. 2023.12.24-19:15:49.01@0: ( static( pname=ipsec pid=150 ) local( WAITING) peer(85,ffffffff,,BADID) ) entering state READY
  1109. 2023.12.24-19:15:49.01@0: ( static( pname=ipsec pid=150 ) local( READY) peer(85,ffffffff,,BADID) ) sending READY_CONFIRM message
  1110. 2023.12.24-19:15:49.01@0: ( static( pname=ipsec pid=150 ) local( READY) peer(85,ffffffff,,BADID) ) flusing queue
  1111.  
  1112. @syslog@
  1113. 2023.12.24-19:15:49.01@0: [ 10.204825] of_get_named_gpiod_flags: can't parse 'perst-gpio' property of node '/soc/pci@20000000[0]'
  1114.  
  1115. @ww2@
  1116. 2023.12.24-19:15:49.01@0: wps:wpsInit
  1117.  
  1118. @loader@
  1119. 2023.12.24-19:15:49.01@0: ( static( pname=ww2 pid=156 ) local( READY) peer(138,ffffffff,,BADID) ) entering state RUNNING
  1120.  
  1121. @ipsec@
  1122. 2023.12.24-19:15:49.02@0: call pfkey_send_register for AH
  1123. 2023.12.24-19:15:49.02@0: call pfkey_send_register for ESP
  1124. 2023.12.24-19:15:49.02@0: spd flush
  1125.  
  1126. @sys2@
  1127. 2023.12.24-19:15:49.03@3: open file descriptor
  1128. 2023.12.24-19:15:49.03@3: descriptor opened fd=7
  1129. 2023.12.24-19:15:49.03@3: open /dev/fancon failed
  1130.  
  1131. @loader@
  1132. 2023.12.24-19:15:49.03@0: ( static( pname=net pid=141 ) local( WAITING) peer(20,ffffffff,,BADID) ) entering state READY
  1133. 2023.12.24-19:15:49.03@0: ( static( pname=net pid=141 ) local( READY) peer(20,ffffffff,,BADID) ) sending READY_CONFIRM message
  1134. 2023.12.24-19:15:49.03@0: ( static( pname=net pid=141 ) local( READY) peer(20,ffffffff,,BADID) ) flusing queue
  1135.  
  1136. @net@
  1137. 2023.12.24-19:15:49.03@2: sizeof(nv::Handler): 132
  1138. 2023.12.24-19:15:49.03@2: sizeof(nv::Looper): 1400
  1139. 2023.12.24-19:15:49.03@2: sizeof(Iface): 76
  1140. 2023.12.24-19:15:49.03@2: sizeof(Arp): 60
  1141. 2023.12.24-19:15:49.03@2: sizeof(Device): 440
  1142. 2023.12.24-19:15:49.03@2: sizeof(LinuxDevice): 36
  1143. 2023.12.24-19:15:49.03@2: sizeof(EtherDev): 1352
  1144. 2023.12.24-19:15:49.03@2: sizeof(struct ifreq): 32
  1145. 2023.12.24-19:15:49.03@2: offsetof(struct ifreq, ifr_ifru): 16
  1146. 2023.12.24-19:15:49.03@2: sizeof(AddrListEntry): 104
  1147. 2023.12.24-19:15:49.03@2: sizeof(AddrListEntry::Key): 28
  1148. 2023.12.24-19:15:49.04@2: NETLINK: bind family 0 groups 0
  1149. 2023.12.24-19:15:49.04@2: NETLINK: bind family 0 groups 260
  1150.  
  1151. @syslog@
  1152. 2023.12.24-19:15:49.06@3: [ 10.254808] spi-poe-pse poe_v4 init
  1153.  
  1154. @modem@
  1155. 2023.12.24-19:15:49.08@2: modem slot info: 0,/,/
  1156.  
  1157. @net@
  1158. 2023.12.24-19:15:49.12@2: registering remote provider: type:68 ustring:wifi lnameprefix: defqueue:3 addable:0 status:1
  1159.  
  1160. @route@
  1161. 2023.12.24-19:15:49.12@0: no okfile
  1162. 2023.12.24-19:15:49.12@0: Initialize shmem
  1163. 2023.12.24-19:15:49.12@0: Map private 3072-3104 0x30000000-0x307fffff (expected 30000000-307fffff)
  1164. 2023.12.24-19:15:49.12@0: mapImpl(0, 64, 0xfffee36c, 0xfffedb70, 8)
  1165. 2023.12.24-19:15:49.12@0: Map shared 2048-2080 0x20000000-0x207fffff (expected 20000000-207fffff)
  1166. 2023.12.24-19:15:49.12@0: [146 146] Initialize main looper
  1167.  
  1168. @loader@
  1169. 2023.12.24-19:15:49.12@0: ( static( pname=route pid=146 ) local( WAITING) peer(44,ffffffff,,BADID) ) entering state READY
  1170. 2023.12.24-19:15:49.12@0: ( static( pname=route pid=146 ) local( READY) peer(44,ffffffff,,BADID) ) sending READY_CONFIRM message
  1171. 2023.12.24-19:15:49.12@0: ( static( pname=route pid=146 ) local( READY) peer(44,ffffffff,,BADID) ) flusing queue
  1172.  
  1173. @net@
  1174. 2023.12.24-19:15:49.14@2: registering remote provider: type:19 ustring:ppp-in lnameprefix: defqueue:0 addable:1 status:0
  1175. 2023.12.24-19:15:49.14@2: registering remote provider: type:20 ustring:ppp-out lnameprefix: defqueue:0 addable:1 status:0
  1176. 2023.12.24-19:15:49.14@2: registering remote provider: type:10 ustring:pptp-in lnameprefix: defqueue:0 addable:1 status:0
  1177. 2023.12.24-19:15:49.14@2: registering remote provider: type:11 ustring:pptp-out lnameprefix: defqueue:0 addable:1 status:0
  1178. 2023.12.24-19:15:49.14@2: registering remote provider: type:33 ustring:l2tp-in lnameprefix: defqueue:0 addable:1 status:0
  1179. 2023.12.24-19:15:49.14@2: registering remote provider: type:34 ustring:l2tp-out lnameprefix: defqueue:0 addable:1 status:0
  1180. 2023.12.24-19:15:49.14@2: registering remote provider: type:16 ustring:pppoe-in lnameprefix: defqueue:0 addable:1 status:0
  1181. 2023.12.24-19:15:49.14@2: registering remote provider: type:18 ustring:pppoe-out lnameprefix: defqueue:0 addable:1 status:0
  1182. 2023.12.24-19:15:49.14@2: registering remote provider: type:45 ustring:ovpn-in lnameprefix: defqueue:4294967292 addable:1 status:0
  1183. 2023.12.24-19:15:49.14@2: registering remote provider: type:44 ustring:ovpn-out lnameprefix: defqueue:4294967292 addable:1 status:0
  1184. 2023.12.24-19:15:49.14@2: registering remote provider: type:51 ustring:sstp-in lnameprefix: defqueue:0 addable:1 status:0
  1185. 2023.12.24-19:15:49.14@2: registering remote provider: type:52 ustring:sstp-out lnameprefix: defqueue:0 addable:1 status:0
  1186. 2023.12.24-19:15:49.14@2: registering remote provider: type:73 ustring:l2tp-ether lnameprefix: defqueue:0 addable:1 status:0
  1187. 2023.12.24-19:15:49.15@2: registering remote provider: type:12 ustring:bridge lnameprefix: defqueue:0 addable:1 status:1
  1188. 2023.12.24-19:15:49.15@2: registering remote provider: type:46 ustring:mesh lnameprefix: defqueue:0 addable:1 status:1
  1189. 2023.12.24-19:15:49.15@2: registering remote provider: type:3 ustring:vrrp lnameprefix: defqueue:0 addable:1 status:0
  1190. 2023.12.24-19:15:49.15@2: registering remote provider: type:50 ustring:vif lnameprefix: defqueue:0 addable:1 status:0
  1191. 2023.12.24-19:15:49.15@2: registering remote provider: type:65 ustring:macsec lnameprefix: defqueue:0 addable:1 status:1
  1192. 2023.12.24-19:15:49.15@2: registering remote provider: type:47 ustring:vpls lnameprefix: defqueue:0 addable:1 status:1
  1193. 2023.12.24-19:15:49.15@2: registering remote provider: type:69 ustring:extport lnameprefix: defqueue:0 addable:1 status:1
  1194. 2023.12.24-19:15:49.15@2: registering remote provider: type:47 ustring:vpls lnameprefix: defqueue:0 addable:1 status:1
  1195. 2023.12.24-19:15:49.15@2: ADDRLIST netlink: enable
  1196. 2023.12.24-19:15:49.15@2: ADDRLIST netlink: RCBUF: 212992
  1197. 2023.12.24-19:15:49.15@2: ADDRLIST netlink: RCBUF: 524288
  1198. 2023.12.24-19:15:49.15@2: NETLINK: bind family 0 groups 0
  1199. 2023.12.24-19:15:49.15@2: sizeof(QueueNode): 272
  1200. 2023.12.24-19:15:49.15@2: sizeof(HTBNode): 168
  1201. 2023.12.24-19:15:49.15@2: sizeof(SimpleQueue): 704
  1202.  
  1203. @route@
  1204. 2023.12.24-19:15:49.17@0: handler remap :fd1000 as fffe0000
  1205. 2023.12.24-19:15:49.17@0: handler remap :fd1001 as fffe0001
  1206. 2023.12.24-19:15:49.17@0: handler remap :fd1002 as fffe0002
  1207. 2023.12.24-19:15:49.17@0: handler remap :fd1003 as fffe0003
  1208. 2023.12.24-19:15:49.17@0: Created Task #1: routing tables
  1209. 2023.12.24-19:15:49.17@0: routing policy publish ON
  1210. 2023.12.24-19:15:49.17@0: routing policy wipe ON
  1211. 2023.12.24-19:15:49.17@0: mark default dsts ON
  1212. 2023.12.24-19:15:49.17@0: handler remap :fd1004 as fffe0004
  1213. 2023.12.24-19:15:49.17@0: update connected route information ON
  1214. 2023.12.24-19:15:49.17@0: CREATE CALC TASK
  1215. 2023.12.24-19:15:49.17@0: Created Task #2: rib
  1216. 2023.12.24-19:15:49.17@0: main route calculation ON
  1217. 2023.12.24-19:15:49.17@0: mark used origins ON
  1218. 2023.12.24-19:15:49.17@0: ON
  1219. 2023.12.24-19:15:49.17@0: ON
  1220. 2023.12.24-19:15:49.17@0: CREATE HOLD TASK
  1221. 2023.12.24-19:15:49.17@0: ON
  1222. 2023.12.24-19:15:49.17@0: starting endpoint NETLINK with rpc: { to=NETLINK from= ds=1 sz1=92 sz2=0 } auxfd -1 senditem 0xf7f06c60
  1223. 2023.12.24-19:15:49.17@0: starting endpoint POLICY with rpc: { to=POLICY from= ds=1 sz1=92 sz2=0 } auxfd -1 senditem 0xf7f06d20
  1224. 2023.12.24-19:15:49.18@0: starting endpoint STATIC with rpc: { to=STATIC from= ds=1 sz1=92 sz2=0 } auxfd -1 senditem 0xf7f06c60
  1225. 2023.12.24-19:15:49.18@0: starting endpoint BFD with rpc: { to=BFD from= ds=1 sz1=92 sz2=0 } auxfd -1 senditem 0xf7f06d20
  1226. 2023.12.24-19:15:49.18@0: starting endpoint OSPF with rpc: { to=OSPF from= ds=1 sz1=92 sz2=0 } auxfd -1 senditem 0xf7f06c60
  1227. 2023.12.24-19:15:49.18@0: starting endpoint ISIS with rpc: { to=ISIS from= ds=1 sz1=92 sz2=0 } auxfd -1 senditem 0xf7f06d20
  1228.  
  1229. @net@
  1230. 2023.12.24-19:15:49.18@2: music config set 0
  1231.  
  1232. @route@
  1233. 2023.12.24-19:15:49.18@0: starting endpoint PIMSM with rpc: { to=PIMSM from= ds=1 sz1=92 sz2=0 } auxfd -1 senditem 0xf7f06c60
  1234.  
  1235. @net@
  1236. 2023.12.24-19:15:49.18@2: ASecMap[69]: store does not have ORDER_ID
  1237. 2023.12.24-19:15:49.18@2: ASecMap[70]: store does not have ORDER_ID
  1238. 2023.12.24-19:15:49.18@2: ASecMap[78]: store does not have ORDER_ID
  1239. 2023.12.24-19:15:49.18@2: ASecMap[79]: store does not have ORDER_ID
  1240. 2023.12.24-19:15:49.18@2: ASecMap[80]: store does not have ORDER_ID
  1241. 2023.12.24-19:15:49.18@2: QoS init
  1242. 2023.12.24-19:15:49.18@2: QoS TxMan default init queues
  1243. 2023.12.24-19:15:49.18@2: - TxMan 0 queue match TC 0
  1244. 2023.12.24-19:15:49.18@2: - TxMan 0 queue match TC 1
  1245. 2023.12.24-19:15:49.18@2: - TxMan 0 queue match TC 2
  1246. 2023.12.24-19:15:49.18@2: - TxMan 0 queue match TC 3
  1247. 2023.12.24-19:15:49.18@2: - TxMan 0 queue match TC 4
  1248. 2023.12.24-19:15:49.18@2: - TxMan 0 queue match TC 5
  1249. 2023.12.24-19:15:49.18@2: - TxMan 0 queue match TC 6
  1250. 2023.12.24-19:15:49.18@2: - TxMan 0 queue match TC 7
  1251.  
  1252. @route@
  1253. 2023.12.24-19:15:49.18@0: starting endpoint LDP with rpc: { to=LDP from= ds=1 sz1=92 sz2=0 } auxfd -1 senditem 0xf7f06d20
  1254. 2023.12.24-19:15:49.18@0: starting endpoint RIP with rpc: { to=RIP from= ds=1 sz1=92 sz2=0 } auxfd -1 senditem 0xf7f06c60
  1255. 2023.12.24-19:15:49.19@0: starting endpoint BGP with rpc: { to=BGP from= ds=1 sz1=92 sz2=0 } auxfd -1 senditem 0xf7f06d20
  1256.  
  1257. @net@
  1258. 2023.12.24-19:15:49.19@2: conntrack: conntrackRulesAllowed[0] = 1
  1259. 2023.12.24-19:15:49.19@2: conntrack: conntrackRulesAllowed[1] = 1
  1260.  
  1261. @route@
  1262. 2023.12.24-19:15:49.19@0: CREATE ROUTING TABLE TASK
  1263. 2023.12.24-19:15:49.19@0: CREATE NET MIRROR TASK
  1264. 2023.12.24-19:15:49.19@0: wipe ON
  1265. 2023.12.24-19:15:49.19@0: mark ON
  1266. 2023.12.24-19:15:49.19@1: no okfile
  1267. 2023.12.24-19:15:49.19@1: Map shared 2048-2049 0x20000000-0x2003ffff (expected 20000000-2003ffff)
  1268. 2023.12.24-19:15:49.19@1: Map private 3072-3104 0x30000000-0x307fffff (expected 30000000-307fffff)
  1269. 2023.12.24-19:15:49.19@1: Join shmem
  1270. 2023.12.24-19:15:49.19@1: mapImpl(1, 64, 0x20000000, 0x20000a0c, 8)
  1271. 2023.12.24-19:15:49.19@1: Map shared 2048-2080 0x20000000-0x207fffff (expected 20000000-207fffff)
  1272. 2023.12.24-19:15:49.19@1: [191 146] Initialize remote looper
  1273. 2023.12.24-19:15:49.19@1: NETLINK rtable proxy getdir ON
  1274. 2023.12.24-19:15:49.19@1: NETLINK rtable proxy cleanup ON
  1275. 2023.12.24-19:15:49.19@1: CREATE NETLINK TASK
  1276. 2023.12.24-19:15:49.19@1: NETLINK route/fib/publish/sync ON
  1277. 2023.12.24-19:15:49.19@1: NETLINK route/fib/publish/mark ON
  1278.  
  1279. @net@
  1280. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 1, offs 96
  1281. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 2, offs 248
  1282. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 3, offs 400
  1283. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 4294967295, offs 552
  1284. 2023.12.24-19:15:49.20@2: ipt filter: rebuild general 0->0
  1285. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 1, offs 96
  1286. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 2, offs 304
  1287. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 3, offs 512
  1288. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 4294967295, offs 720
  1289. 2023.12.24-19:15:49.20@2: ipt6 filter: rebuild general 0->0
  1290. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 1, offs 96
  1291. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 2, offs 248
  1292. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 3, offs 400
  1293. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 4, offs 552
  1294. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 5, offs 704
  1295. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 4294967295, offs 856
  1296. 2023.12.24-19:15:49.20@2: ipt mangle: rebuild general 0->0
  1297. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 1, offs 96
  1298. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 2, offs 304
  1299. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 3, offs 512
  1300. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 4, offs 720
  1301. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 5, offs 928
  1302. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 4294967295, offs 1136
  1303. 2023.12.24-19:15:49.20@2: ipt6 mangle: rebuild general 0->0
  1304. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 1, offs 96
  1305. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 2, offs 248
  1306. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 3, offs 400
  1307. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 4, offs 552
  1308. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 4294967295, offs 704
  1309. 2023.12.24-19:15:49.20@2: ipt nat: rebuild general 0->0
  1310. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 1, offs 96
  1311. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 2, offs 304
  1312. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 3, offs 512
  1313. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 4, offs 720
  1314. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 4294967295, offs 928
  1315. 2023.12.24-19:15:49.20@2: ipt6 nat: rebuild general 0->0
  1316. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 1, offs 96
  1317. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 2, offs 248
  1318. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 4294967295, offs 400
  1319. 2023.12.24-19:15:49.20@2: ipt raw: rebuild general 0->0
  1320. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 1, offs 96
  1321. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 2, offs 304
  1322. 2023.12.24-19:15:49.20@2: XTREPLACE: startChain, id 4294967295, offs 512
  1323. 2023.12.24-19:15:49.20@2: ipt6 raw: rebuild general 0->0
  1324. 2023.12.24-19:15:49.20@2: ebt filter: rebuild general 0->0
  1325. 2023.12.24-19:15:49.20@2: ebt nat: rebuild general 0->0
  1326. 2023.12.24-19:15:49.20@2: run
  1327.  
  1328. @loader@
  1329. 2023.12.24-19:15:49.20@0: ( static( pname=net pid=141 ) local( READY) peer(20,ffffffff,,BADID) ) entering state RUNNING
  1330. 2023.12.24-19:15:49.20@0: checkForFreeMemory
  1331. 2023.12.24-19:15:49.20@0: ( static( pname=ippool6 ) local( DEAD) peer(30,ffffffff,,BADID) ) run! started, pid 201
  1332. 2023.12.24-19:15:49.20@0: ( static( pname=ippool6 pid=201 ) local( DEAD) peer(30,ffffffff,,BADID) ) entering state WAITING
  1333.  
  1334. @net@
  1335. 2023.12.24-19:15:49.20@2: ifaces: reopen netlink with notifs
  1336.  
  1337. @mactel@
  1338. 2023.12.24-19:15:49.20@2: AsyncReget done
  1339.  
  1340. @macping@
  1341. 2023.12.24-19:15:49.20@0: AsyncReget done
  1342.  
  1343. @discover@
  1344. 2023.12.24-19:15:49.20@2: platform: MikroTik
  1345. 2023.12.24-19:15:49.20@2: osvers:7.13 (stable) Dec/14/2023 09:24:08
  1346. 2023.12.24-19:15:49.21@2: [ND] subscribe to netdev
  1347.  
  1348. @net@
  1349. 2023.12.24-19:15:49.21@2: NETLINK: bind family 0 groups 1
  1350. 2023.12.24-19:15:49.21@2: ifaces: increase netlink recv buffer
  1351. 2023.12.24-19:15:49.21@2: netlink sk:6 old RCBUF: 212992
  1352. 2023.12.24-19:15:49.21@2: netlink sk:6 new RCBUF: 425984
  1353.  
  1354. @route@
  1355. 2023.12.24-19:15:49.22@1: Created Task #1: fib
  1356. 2023.12.24-19:15:49.22@3: no okfile
  1357. 2023.12.24-19:15:49.23@0: starting endpoint FANTASY with rpc: { to=FANTASY from= ds=1 sz1=92 sz2=0 } auxfd -1 senditem 0xf7f06c60
  1358. 2023.12.24-19:15:49.23@1: no okfile
  1359. 2023.12.24-19:15:49.23@3: no okfile
  1360. 2023.12.24-19:15:49.23@1: no okfile
  1361. 2023.12.24-19:15:49.23@1: NETLINK publish ON
  1362.  
  1363. @loader@
  1364. 2023.12.24-19:15:49.22@1: ( static( pname=quickset pid=152 ) local( READY) peer(120,ffffffff,,BADID) ) entering state RUNNING
  1365. 2023.12.24-19:15:49.22@1: ( static( pname=mproxy pid=134 ) local( READY) peer(2,ffffffff,,BADID) ) entering state RUNNING
  1366. 2023.12.24-19:15:49.22@1: ( static( pname=bridge2 pid=139 ) local( READY) peer(16,ffffffff,,BADID) ) entering state RUNNING
  1367. 2023.12.24-19:15:49.22@1: ( static( pname=bridge2 pid=139 ) local( RUNNING) peer(16,ffffffff,,BADID) )SETUP timeout to:1000
  1368. 2023.12.24-19:15:49.22@1: checkForFreeMemory
  1369. 2023.12.24-19:15:49.23@1: checkForFreeMemory
  1370. 2023.12.24-19:15:49.23@1: ( static( pname=cerm ) local( DEAD) peer(19,ffffffff,,BADID) ) run! started, pid 203
  1371. 2023.12.24-19:15:49.23@1: ( static( pname=cerm pid=203 ) local( DEAD) peer(19,ffffffff,,BADID) ) entering state WAITING
  1372. 2023.12.24-19:15:49.23@1: ( static( pname=sermgr pid=148 ) local( READY) peer(68,ffffffff,,BADID) ) entering state RUNNING
  1373.  
  1374. @mproxy@
  1375. 2023.12.24-19:15:49.22@3: sermgr::CMD_SET
  1376.  
  1377. @bridge2@
  1378. 2023.12.24-19:15:49.22@2: do run
  1379. 2023.12.24-19:15:49.22@2: AsyncReget done
  1380.  
  1381. @sermgr@
  1382. 2023.12.24-19:15:49.23@0: SMG: enable
  1383. 2023.12.24-19:15:49.23@0: SMG: enabling
  1384. 2023.12.24-19:15:49.23@0: SMG: running
  1385.  
  1386. @ipsec@
  1387. 2023.12.24-19:15:49.22@0: ---cert---
  1388.  
  1389. @quickset@
  1390. 2023.12.24-19:15:49.22@2: caps=0
  1391.  
  1392. @ww2@
  1393. 2023.12.24-19:15:49.22@1: IfaceHandler::setConfig: i=<0xf7da2de0||*3|wifi1||> init 1 fresh 1
  1394. 2023.12.24-19:15:49.22@1: IfaceHandler::setConfig: phymac change, relink 00:00:00:00:00:00->48:A9:8A:C1:AC:5A
  1395. 2023.12.24-19:15:49.22@1: IfaceHandler::setConfig: applied, i=<0xf7da2de0|48:A9:8A:C1:AC:5A|*3|wifi1||> oldmasterid=4294967295 oldphymac=00:00:00:00:00:00 oldmaster=(null)
  1396. 2023.12.24-19:15:49.22@1: IfaceHandler::setConfig: look for slaves in mastermissing
  1397. 2023.12.24-19:15:49.22@1: IfaceHandler::setConfig: i=<0xf7da2cc0||*4|wifi2||> init 1 fresh 1
  1398. 2023.12.24-19:15:49.22@1: IfaceHandler::setConfig: phymac change, relink 00:00:00:00:00:00->48:A9:8A:C1:AC:5B
  1399. 2023.12.24-19:15:49.22@1: IfaceHandler::setConfig: applied, i=<0xf7da2cc0|48:A9:8A:C1:AC:5B|*4|wifi2||> oldmasterid=4294967295 oldphymac=00:00:00:00:00:00 oldmaster=(null)
  1400. 2023.12.24-19:15:49.22@1: IfaceHandler::setConfig: look for slaves in mastermissing
  1401. 2023.12.24-19:15:49.22@1: main: start localphy-qcom
  1402. 2023.12.24-19:15:49.22@1: getBaseMac: from flash 48:A9:8A:C1:AC:58
  1403.  
  1404. @route@
  1405. 2023.12.24-19:15:49.23@3: Map shared 2048-2049 0x20000000-0x2003ffff (expected 20000000-2003ffff)
  1406. 2023.12.24-19:15:49.23@1: no okfile
  1407. 2023.12.24-19:15:49.23@1: no okfile
  1408. 2023.12.24-19:15:49.23@1: no okfile
  1409. 2023.12.24-19:15:49.23@1: no okfile
  1410. 2023.12.24-19:15:49.24@1: Map shared 2048-2049 0x20000000-0x2003ffff (expected 20000000-2003ffff)
  1411. 2023.12.24-19:15:49.24@0: handler remap NETLINK:fd1000 as fffe0005
  1412. 2023.12.24-19:15:49.24@1: Map shared 2048-2049 0x20000000-0x2003ffff (expected 20000000-2003ffff)
  1413. 2023.12.24-19:15:49.24@1: Map shared 2048-2049 0x20000000-0x2003ffff (expected 20000000-2003ffff)
  1414. 2023.12.24-19:15:49.24@1: Map private 3072-3104 0x30000000-0x307fffff (expected 30000000-307fffff)
  1415.  
  1416. @loader@
  1417. 2023.12.24-19:15:49.23@1: ( static( pname=ippool6 pid=201 ) local( WAITING) peer(30,ffffffff,,BADID) ) entering state READY
  1418. 2023.12.24-19:15:49.23@1: ( static( pname=ippool6 pid=201 ) local( READY) peer(30,ffffffff,,BADID) ) sending READY_CONFIRM message
  1419. 2023.12.24-19:15:49.23@1: ( static( pname=ippool6 pid=201 ) local( READY) peer(30,ffffffff,,BADID) ) flusing queue
  1420. 2023.12.24-19:15:49.23@1: ( static( pname=ippool6 pid=201 ) local( READY) peer(30,ffffffff,,BADID) ) entering state RUNNING
  1421. 2023.12.24-19:15:49.23@1: ( static( pname=ippool6 pid=201 ) local( RUNNING) peer(30,ffffffff,,BADID) )SETUP timeout to:1000
  1422. 2023.12.24-19:15:49.23@1: checkForFreeMemory
  1423.  
  1424. @ww2@
  1425. 2023.12.24-19:15:49.23@3: lphy-qcom: init
  1426.  
  1427. @route@
  1428. 2023.12.24-19:15:49.24@1: Map shared 2048-2049 0x20000000-0x2003ffff (expected 20000000-2003ffff)
  1429. 2023.12.24-19:15:49.24@0: no okfile
  1430. 2023.12.24-19:15:49.24@1: Map shared 2048-2049 0x20000000-0x2003ffff (expected 20000000-2003ffff)
  1431. 2023.12.24-19:15:49.24@1: Map shared 2048-2049 0x20000000-0x2003ffff (expected 20000000-2003ffff)
  1432. 2023.12.24-19:15:49.24@1: Map shared 2048-2049 0x20000000-0x2003ffff (expected 20000000-2003ffff)
  1433. 2023.12.24-19:15:49.24@1: Map private 3072-3104 0x30000000-0x307fffff (expected 30000000-307fffff)
  1434. 2023.12.24-19:15:49.24@1: Map private 3072-3104 0x30000000-0x307fffff (expected 30000000-307fffff)
  1435. 2023.12.24-19:15:49.24@1: Map private 3072-3104 0x30000000-0x307fffff (expected 30000000-307fffff)
  1436. 2023.12.24-19:15:49.24@0: handler remap NETLINK:fd1001 as fffe0006
  1437. 2023.12.24-19:15:49.24@1: Join shmem
  1438. 2023.12.24-19:15:49.24@1: Map private 3072-3104 0x30000000-0x307fffff (expected 30000000-307fffff)
  1439. 2023.12.24-19:15:49.24@1: Map private 3072-3104 0x30000000-0x307fffff (expected 30000000-307fffff)
  1440. 2023.12.24-19:15:49.24@1: Map private 3072-3104 0x30000000-0x307fffff (expected 30000000-307fffff)
  1441. 2023.12.24-19:15:49.24@0: Map shared 2048-2049 0x20000000-0x2003ffff (expected 20000000-2003ffff)
  1442. 2023.12.24-19:15:49.24@1: Map private 3072-3104 0x30000000-0x307fffff (expected 30000000-307fffff)
  1443. 2023.12.24-19:15:49.24@1: Join shmem
  1444. 2023.12.24-19:15:49.24@1: Join shmem
  1445. 2023.12.24-19:15:49.24@0: handler remap NETLINK:fd1002 as fffe0007
  1446. 2023.12.24-19:15:49.24@1: Join shmem
  1447. 2023.12.24-19:15:49.24@1: mapImpl(1, 64, 0x20000000, 0x20000a0c, 8)
  1448. 2023.12.24-19:15:49.24@1: Join shmem
  1449. 2023.12.24-19:15:49.24@1: Join shmem
  1450. 2023.12.24-19:15:49.24@0: Map private 3072-3104 0x30000000-0x307fffff (expected 30000000-307fffff)
  1451. 2023.12.24-19:15:49.24@1: Join shmem
  1452. 2023.12.24-19:15:49.24@1: Join shmem
  1453. 2023.12.24-19:15:49.24@1: mapImpl(1, 64, 0x20000000, 0x20000a0c, 8)
  1454. 2023.12.24-19:15:49.24@1: mapImpl(1, 64, 0x20000000, 0x20000a0c, 8)
  1455. 2023.12.24-19:15:49.24@1: mapImpl(1, 64, 0x20000000, 0x20000a0c, 8)
  1456. 2023.12.24-19:15:49.24@0: handler remap NETLINK:fd1003 as fffe0008
  1457. 2023.12.24-19:15:49.24@1: Map shared 2048-2080 0x20000000-0x207fffff (expected 20000000-207fffff)
  1458. 2023.12.24-19:15:49.24@1: mapImpl(1, 64, 0x20000000, 0x20000a0c, 8)
  1459. 2023.12.24-19:15:49.24@1: mapImpl(1, 64, 0x20000000, 0x20000a0c, 8)
  1460. 2023.12.24-19:15:49.24@1: mapImpl(1, 64, 0x20000000, 0x20000a0c, 8)
  1461. 2023.12.24-19:15:49.24@1: mapImpl(1, 64, 0x20000000, 0x20000a0c, 8)
  1462. 2023.12.24-19:15:49.24@1: Map shared 2048-2080 0x20000000-0x207fffff (expected 20000000-207fffff)
  1463. 2023.12.24-19:15:49.24@1: Map shared 2048-2080 0x20000000-0x207fffff (expected 20000000-207fffff)
  1464. 2023.12.24-19:15:49.25@1: Map shared 2048-2080 0x20000000-0x207fffff (expected 20000000-207fffff)
  1465. 2023.12.24-19:15:49.25@0: Join shmem
  1466. 2023.12.24-19:15:49.25@0: handler remap NETLINK:fd1004 as fffe0009
  1467. 2023.12.24-19:15:49.25@1: [192 146] Initialize remote looper
  1468. 2023.12.24-19:15:49.25@0: Map shared 2048-2080 0x20000000-0x207fffff (expected 20000000-207fffff)
  1469. 2023.12.24-19:15:49.25@1: Map shared 2048-2080 0x20000000-0x207fffff (expected 20000000-207fffff)
  1470. 2023.12.24-19:15:49.25@1: Map shared 2048-2080 0x20000000-0x207fffff (expected 20000000-207fffff)
  1471. 2023.12.24-19:15:49.25@1: Map shared 2048-2080 0x20000000-0x207fffff (expected 20000000-207fffff)
  1472. 2023.12.24-19:15:49.25@1: [195 146] Initialize remote looper
  1473. 2023.12.24-19:15:49.25@0: no okfile
  1474. 2023.12.24-19:15:49.25@0: [197 146] Initialize remote looper
  1475. 2023.12.24-19:15:49.25@0: mapImpl(1, 64, 0x20000000, 0x20000a0c, 8)
  1476. 2023.12.24-19:15:49.25@0: handler map :14
  1477. 2023.12.24-19:15:49.25@1: [199 146] Initialize remote looper
  1478. 2023.12.24-19:15:49.25@0: [194 146] Initialize remote looper
  1479. 2023.12.24-19:15:49.25@1: [196 146] Initialize remote looper
  1480. 2023.12.24-19:15:49.25@0: [200 146] Initialize remote looper
  1481. 2023.12.24-19:15:49.26@1: [198 146] Initialize remote looper
  1482. 2023.12.24-19:15:49.26@0: Map shared 2048-2049 0x20000000-0x2003ffff (expected 20000000-2003ffff)
  1483. 2023.12.24-19:15:49.26@0: OSPF rtable proxy getdir ON
  1484. 2023.12.24-19:15:49.26@0: PIMSM rtable proxy getdir ON
  1485. 2023.12.24-19:15:49.26@0: Map shared 2048-2080 0x20000000-0x207fffff (expected 20000000-207fffff)
  1486. 2023.12.24-19:15:49.26@0: handler remap NETLINK:fd1005 as fffe000a
  1487. 2023.12.24-19:15:49.26@0: BFD rtable proxy getdir ON
  1488. 2023.12.24-19:15:49.26@1: RIP rtable proxy getdir ON
  1489. 2023.12.24-19:15:49.26@0: POLICY rtable proxy getdir ON
  1490. 2023.12.24-19:15:49.26@1: ISIS rtable proxy getdir ON
  1491. 2023.12.24-19:15:49.26@0: BGP rtable proxy getdir ON
  1492. 2023.12.24-19:15:49.26@0: Map private 3072-3104 0x30000000-0x307fffff (expected 30000000-307fffff)
  1493. 2023.12.24-19:15:49.26@0: OSPF rtable proxy cleanup ON
  1494. 2023.12.24-19:15:49.26@0: PIMSM rtable proxy cleanup ON
  1495. 2023.12.24-19:15:49.26@1: LDP rtable proxy getdir ON
  1496. 2023.12.24-19:15:49.26@0: [193 146] Initialize remote looper
  1497. 2023.12.24-19:15:49.26@0: handler remap NETLINK:fd1006 as fffe000b
  1498. 2023.12.24-19:15:49.26@0: BFD rtable proxy cleanup ON
  1499. 2023.12.24-19:15:49.26@1: RIP rtable proxy cleanup ON
  1500. 2023.12.24-19:15:49.26@0: POLICY rtable proxy cleanup ON
  1501. 2023.12.24-19:15:49.26@1: ISIS rtable proxy cleanup ON
  1502. 2023.12.24-19:15:49.26@0: BGP rtable proxy cleanup ON
  1503. 2023.12.24-19:15:49.26@0: CREATE OSPF TASK
  1504. 2023.12.24-19:15:49.26@1: LDP rtable proxy cleanup ON
  1505. 2023.12.24-19:15:49.26@0: PIMSM update connected route information ON
  1506. 2023.12.24-19:15:49.26@0: STATIC rtable proxy getdir ON
  1507. 2023.12.24-19:15:49.26@0: handler remap NETLINK:fd1007 as fffe000c
  1508. 2023.12.24-19:15:49.26@0: BFD update connected route information ON
  1509. 2023.12.24-19:15:49.26@1: RIP update connected route information ON
  1510. 2023.12.24-19:15:49.26@0: Created Task #1: routing policy configuration
  1511. 2023.12.24-19:15:49.26@1: Created Task #1: isis
  1512. 2023.12.24-19:15:49.26@0: Created Task #1: BGP service
  1513. 2023.12.24-19:15:49.26@0: Created Task #1: ospf
  1514. 2023.12.24-19:15:49.26@0: Created Task #1: pimsm
  1515. 2023.12.24-19:15:49.26@1: LDP ON
  1516. 2023.12.24-19:15:49.26@0: STATIC rtable proxy cleanup ON
  1517. 2023.12.24-19:15:49.26@0: inhibit sleep, publish requested
  1518. 2023.12.24-19:15:49.26@0: Created Task #1: BFD service
  1519. 2023.12.24-19:15:49.26@0: Join shmem
  1520. 2023.12.24-19:15:49.26@1: Created Task #1: rip
  1521. 2023.12.24-19:15:49.26@0: BGP update connected route information ON
  1522. 2023.12.24-19:15:49.26@0: OSPF update connected route information ON
  1523. 2023.12.24-19:15:49.26@1: ISIS link update ON
  1524. 2023.12.24-19:15:49.26@0: PIMSM cfg update ON
  1525. 2023.12.24-19:15:49.26@0: CREATE STATIC TASK
  1526. 2023.12.24-19:15:49.26@0: handler remap POLICY:fd1000 as fffe000d
  1527. 2023.12.24-19:15:49.26@1: LDP route/ldp/publish/sync ON
  1528. 2023.12.24-19:15:49.26@0: POLICY publish ON
  1529. 2023.12.24-19:15:49.26@0: mapImpl(1, 64, 0x20000000, 0x20000a0c, 8)
  1530. 2023.12.24-19:15:49.26@0: BFD BFD cfg apply schedule after 50 jiffies
  1531. 2023.12.24-19:15:49.26@0: BGP origin update ON
  1532. 2023.12.24-19:15:49.26@1: RIP cfg update ON
  1533. 2023.12.24-19:15:49.26@0: Created Task #1: configuration and reporting
  1534. 2023.12.24-19:15:49.26@0: handler remap POLICY:fd1001 as fffe000e
  1535. 2023.12.24-19:15:49.27@0: OSPF policy merge ON
  1536. 2023.12.24-19:15:49.27@1: LDP route/ldp/publish/mark ON
  1537. 2023.12.24-19:15:49.27@0: POLICY mark ON
  1538. 2023.12.24-19:15:49.27@0: Map shared 2048-2080 0x20000000-0x207fffff (expected 20000000-207fffff)
  1539. 2023.12.24-19:15:49.27@0: STATIC route/static/dst/mark ON
  1540. 2023.12.24-19:15:49.27@0: handler remap POLICY:fd1002 as fffe000f
  1541. 2023.12.24-19:15:49.27@0: BGP apply configuration schedule because template cfg change after 5 jiffies
  1542. 2023.12.24-19:15:49.27@0: POLICY wipe ON
  1543. 2023.12.24-19:15:49.27@1: Created Task #1: ldp
  1544. 2023.12.24-19:15:49.27@0: STATIC route/static/dst/publish ON
  1545. 2023.12.24-19:15:49.27@0: handler remap POLICY:fd1003 as fffe0010
  1546. 2023.12.24-19:15:49.27@1: LDP ON
  1547. 2023.12.24-19:15:49.27@0: STATIC wipe ON
  1548. 2023.12.24-19:15:49.27@0: handler remap OSPF:fd1000 as fffe0011
  1549. 2023.12.24-19:15:49.27@0: STATIC mark ON
  1550. 2023.12.24-19:15:49.27@0: handler remap OSPF:fd1001 as fffe0012
  1551. 2023.12.24-19:15:49.27@1: LDP ON
  1552. 2023.12.24-19:15:49.27@0: STATIC update static routes ON
  1553. 2023.12.24-19:15:49.27@0: handler remap OSPF:fd1002 as fffe0013
  1554. 2023.12.24-19:15:49.27@0: STATIC notifications ON
  1555. 2023.12.24-19:15:49.27@0: handler remap PIMSM:fd1000 as fffe0014
  1556. 2023.12.24-19:15:49.27@0: STATIC process api queue ON
  1557. 2023.12.24-19:15:49.27@0: handler remap OSPF:fd1003 as fffe0015
  1558. 2023.12.24-19:15:49.27@0: handler remap PIMSM:fd1001 as fffe0016
  1559. 2023.12.24-19:15:49.27@0: handler remap PIMSM:fd1002 as fffe0017
  1560. 2023.12.24-19:15:49.27@0: handler remap OSPF:fd1004 as fffe0018
  1561. 2023.12.24-19:15:49.27@0: handler remap PIMSM:fd1003 as fffe0019
  1562. 2023.12.24-19:15:49.27@0: handler remap OSPF:fd1005 as fffe001a
  1563. 2023.12.24-19:15:49.27@0: handler remap PIMSM:fd1004 as fffe001b
  1564. 2023.12.24-19:15:49.27@0: handler remap OSPF:fd1006 as fffe001c
  1565. 2023.12.24-19:15:49.27@0: handler remap PIMSM:fd1005 as fffe001d
  1566. 2023.12.24-19:15:49.27@0: handler remap OSPF:fd1007 as fffe001e
  1567. 2023.12.24-19:15:49.27@0: handler remap PIMSM:fd1006 as fffe001f
  1568. 2023.12.24-19:15:49.27@0: handler remap PIMSM:fd1007 as fffe0020
  1569. 2023.12.24-19:15:49.27@0: handler remap BFD:fd1000 as fffe0021
  1570. 2023.12.24-19:15:49.27@0: handler remap BFD:fd1001 as fffe0022
  1571. 2023.12.24-19:15:49.27@0: handler remap RIP:fd1000 as fffe0023
  1572. 2023.12.24-19:15:49.27@0: handler remap BFD:fd1002 as fffe0024
  1573. 2023.12.24-19:15:49.27@0: handler remap RIP:fd1001 as fffe0025
  1574. 2023.12.24-19:15:49.27@0: handler remap BFD:fd1003 as fffe0026
  1575. 2023.12.24-19:15:49.27@0: handler remap RIP:fd1002 as fffe0027
  1576. 2023.12.24-19:15:49.27@0: handler remap BFD:fd1004 as fffe0028
  1577. 2023.12.24-19:15:49.27@0: handler remap RIP:fd1003 as fffe0029
  1578. 2023.12.24-19:15:49.27@0: handler remap BFD:fd1005 as fffe002a
  1579. 2023.12.24-19:15:49.27@0: handler remap RIP:fd1004 as fffe002b
  1580. 2023.12.24-19:15:49.27@0: handler remap BFD:fd1006 as fffe002c
  1581. 2023.12.24-19:15:49.27@0: handler remap RIP:fd1005 as fffe002d
  1582. 2023.12.24-19:15:49.27@0: handler remap BFD:fd1007 as fffe002e
  1583. 2023.12.24-19:15:49.27@0: handler remap RIP:fd1006 as fffe002f
  1584. 2023.12.24-19:15:49.27@0: handler remap POLICY:fd1004 as fffe0030
  1585. 2023.12.24-19:15:49.27@0: handler remap RIP:fd1007 as fffe0031
  1586. 2023.12.24-19:15:49.27@0: handler remap POLICY:fd1005 as fffe0032
  1587. 2023.12.24-19:15:49.27@0: handler remap POLICY:fd1006 as fffe0033
  1588. 2023.12.24-19:15:49.27@0: handler remap ISIS:fd1000 as fffe0034
  1589. 2023.12.24-19:15:49.27@0: handler remap ISIS:fd1001 as fffe0035
  1590. 2023.12.24-19:15:49.27@0: handler remap POLICY:fd1007 as fffe0036
  1591. 2023.12.24-19:15:49.27@0: handler remap ISIS:fd1002 as fffe0037
  1592. 2023.12.24-19:15:49.27@0: handler remap ISIS:fd1003 as fffe0038
  1593. 2023.12.24-19:15:49.27@0: handler remap BGP:fd1000 as fffe0039
  1594. 2023.12.24-19:15:49.27@0: handler remap ISIS:fd1004 as fffe003a
  1595. 2023.12.24-19:15:49.27@0: handler remap BGP:fd1001 as fffe003b
  1596. 2023.12.24-19:15:49.27@0: handler remap BGP:fd1002 as fffe003c
  1597. 2023.12.24-19:15:49.27@0: handler remap ISIS:fd1005 as fffe003d
  1598. 2023.12.24-19:15:49.27@0: handler remap ISIS:fd1006 as fffe003e
  1599. 2023.12.24-19:15:49.27@0: handler remap BGP:fd1003 as fffe003f
  1600. 2023.12.24-19:15:49.27@0: handler remap BGP:fd1004 as fffe0040
  1601. 2023.12.24-19:15:49.27@0: handler remap ISIS:fd1007 as fffe0041
  1602. 2023.12.24-19:15:49.27@0: handler remap BGP:fd1005 as fffe0042
  1603. 2023.12.24-19:15:49.27@0: handler remap LDP:fd1000 as fffe0043
  1604. 2023.12.24-19:15:49.27@0: handler remap BGP:fd1006 as fffe0044
  1605. 2023.12.24-19:15:49.27@0: handler remap LDP:fd1001 as fffe0045
  1606. 2023.12.24-19:15:49.27@0: handler remap BGP:fd1007 as fffe0046
  1607. 2023.12.24-19:15:49.27@0: handler remap LDP:fd1002 as fffe0047
  1608. 2023.12.24-19:15:49.27@0: handler remap LDP:fd1003 as fffe0048
  1609. 2023.12.24-19:15:49.27@0: handler remap LDP:fd1004 as fffe0049
  1610. 2023.12.24-19:15:49.27@0: handler remap LDP:fd1005 as fffe004a
  1611. 2023.12.24-19:15:49.27@0: handler remap LDP:fd1006 as fffe004b
  1612. 2023.12.24-19:15:49.27@0: handler remap LDP:fd1007 as fffe004c
  1613. 2023.12.24-19:15:49.27@0: handler remap STATIC:fd1000 as fffe004d
  1614. 2023.12.24-19:15:49.27@0: handler remap STATIC:fd1001 as fffe004e
  1615. 2023.12.24-19:15:49.27@0: handler remap STATIC:fd1002 as fffe004f
  1616. 2023.12.24-19:15:49.27@0: handler remap STATIC:fd1003 as fffe0050
  1617. 2023.12.24-19:15:49.27@0: handler remap STATIC:fd1004 as fffe0051
  1618. 2023.12.24-19:15:49.27@0: handler remap STATIC:fd1005 as fffe0052
  1619. 2023.12.24-19:15:49.27@0: handler remap STATIC:fd1006 as fffe0053
  1620. 2023.12.24-19:15:49.27@0: handler remap STATIC:fd1007 as fffe0054
  1621. 2023.12.24-19:15:49.27@0: inhibit sleep, publish requested
  1622. 2023.12.24-19:15:49.27@0: handler remap POLICY:fd1008 as fffe0055
  1623. 2023.12.24-19:15:49.27@0: handler remap POLICY:fd1009 as fffe0056
  1624. 2023.12.24-19:15:49.27@0: handler map :12
  1625. 2023.12.24-19:15:49.27@0: handler map :19
  1626. 2023.12.24-19:15:49.27@0: apply routing policy rule changes schedule after 50 jiffies
  1627. 2023.12.24-19:15:49.28@1: LDP update connected route information ON
  1628. 2023.12.24-19:15:49.28@1: LDP wipe ON
  1629. 2023.12.24-19:15:49.28@1: LDP mark ON
  1630. 2023.12.24-19:15:49.28@0: [204 146] Initialize remote looper
  1631.  
  1632. @loader@
  1633. 2023.12.24-19:15:49.28@1: ( static( pname=cerm pid=203 ) local( WAITING) peer(19,ffffffff,,BADID) ) entering state READY
  1634. 2023.12.24-19:15:49.28@1: ( static( pname=cerm pid=203 ) local( READY) peer(19,ffffffff,,BADID) ) sending READY_CONFIRM message
  1635. 2023.12.24-19:15:49.28@1: ( static( pname=cerm pid=203 ) local( READY) peer(19,ffffffff,,BADID) ) flusing queue
  1636.  
  1637. @route@
  1638. 2023.12.24-19:15:49.28@0: FANTASY rtable proxy getdir ON
  1639. 2023.12.24-19:15:49.28@0: FANTASY rtable proxy cleanup ON
  1640. 2023.12.24-19:15:49.28@0: CREATE FANTASY TASK
  1641. 2023.12.24-19:15:49.28@0: Created Task #1: fantasy
  1642. 2023.12.24-19:15:49.28@1: LDP route/mpls/pw/publish/sync ON
  1643. 2023.12.24-19:15:49.28@1: LDP route/mpls/pw/publish/mark ON
  1644. 2023.12.24-19:15:49.28@1: LDP ON
  1645. 2023.12.24-19:15:49.28@1: LDP inital nexthop rsvp info ON
  1646. 2023.12.24-19:15:49.28@1: LDP route/vpls/publish/sync ON
  1647. 2023.12.24-19:15:49.28@0: handler remap FANTASY:fd1000 as fffe0057
  1648. 2023.12.24-19:15:49.28@0: handler remap FANTASY:fd1001 as fffe0058
  1649. 2023.12.24-19:15:49.28@0: handler remap FANTASY:fd1002 as fffe0059
  1650. 2023.12.24-19:15:49.28@0: handler remap FANTASY:fd1003 as fffe005a
  1651. 2023.12.24-19:15:49.28@0: handler remap FANTASY:fd1004 as fffe005b
  1652. 2023.12.24-19:15:49.28@0: handler remap FANTASY:fd1005 as fffe005c
  1653. 2023.12.24-19:15:49.28@0: handler remap FANTASY:fd1006 as fffe005d
  1654. 2023.12.24-19:15:49.28@0: handler remap FANTASY:fd1007 as fffe005e
  1655. 2023.12.24-19:15:49.28@0: inhibit sleep, publish requested
  1656. 2023.12.24-19:15:49.28@0: handler map LDP:9a
  1657. 2023.12.24-19:15:49.28@1: LDP route/vpls/publish/mark ON
  1658. 2023.12.24-19:15:49.29@1: CREATE COPY TASK
  1659. 2023.12.24-19:15:49.29@1: LDP bgp mpls prepare cleanup ON
  1660. 2023.12.24-19:15:49.29@1: LDP bgp mpls wipe ON
  1661. 2023.12.24-19:15:49.29@1: LDP bgp mpls publish ON
  1662. 2023.12.24-19:15:49.29@0: inhibit sleep, publish requested
  1663.  
  1664. @moduler@
  1665. 2023.12.24-19:15:49.32@1: add@/devices/platform/regulatory.0
  1666.  
  1667. @ww2@
  1668. 2023.12.24-19:15:49.32@0: Genl::init: nl80211 family 22
  1669.  
  1670. @syslog@
  1671. 2023.12.24-19:15:49.32@3: [ 10.517992] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  1672. 2023.12.24-19:15:49.32@3: [ 10.518016] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db
  1673.  
  1674. @ww2@
  1675. 2023.12.24-19:15:49.32@0: Genl::init: nl80211 family 22
  1676. 2023.12.24-19:15:49.32@0: lphy-qcom: genl.pid 202 genllp.pid 4013617792
  1677.  
  1678. @moduler@
  1679. 2023.12.24-19:15:49.32@1: MODALIAS=platform:regulatory
  1680. 2023.12.24-19:15:49.32@1: add@/devices/platform/regulatory.0/firmware/regulatory.db
  1681. 2023.12.24-19:15:49.32@1: loading firmware regulatory.db
  1682. 2023.12.24-19:15:49.32@1: ERROR: could not find regulatory.db
  1683.  
  1684. @syslog@
  1685. 2023.12.24-19:15:49.32@3: [ 10.519718] cfg80211: failed to load regulatory.db
  1686.  
  1687. @moduler@
  1688. 2023.12.24-19:15:49.32@1: remove@/devices/platform/regulatory.0/firmware/regulatory.db
  1689.  
  1690. @route@
  1691. 2023.12.24-19:15:49.32@0: Update BGP configuration
  1692.  
  1693. @quickset@
  1694. 2023.12.24-19:15:49.42@2: caps=0
  1695.  
  1696. @sys2@
  1697. 2023.12.24-19:15:49.57@3: HwmonVoltage: let's do auto-detect.
  1698. 2023.12.24-19:15:49.57@3: Voltage::calculateCorrection()
  1699. 2023.12.24-19:15:49.57@3: open /dev/fancon failed
  1700. 2023.12.24-19:15:49.57@3: Health store is empty
  1701.  
  1702. @loader@
  1703. 2023.12.24-19:15:49.57@1: checkForFreeMemory
  1704. 2023.12.24-19:15:49.57@1: ( static( pname=portman ) local( DEAD) peer(52,ffffffff,,BADID) ) run! started, pid 206
  1705. 2023.12.24-19:15:49.57@1: ( static( pname=portman pid=206 ) local( DEAD) peer(52,ffffffff,,BADID) ) entering state WAITING
  1706.  
  1707. @cloud@
  1708. 2023.12.24-19:15:49.57@1: (TZ) rcvd CMD req:
  1709. 2023.12.24-19:15:49.57@1: --- nv::message --------
  1710. 2023.12.24-19:15:49.57@1: bool [SYS_REPLYEXP]=true
  1711. 2023.12.24-19:15:49.57@1: bool [STD_DISABLED]=false
  1712. 2023.12.24-19:15:49.57@1: u32 [SYS_TYPE]=TYPE_REQUEST
  1713. 2023.12.24-19:15:49.57@1: u32 [SYS_REQID]=0 0x0 0.0.0.0
  1714. 2023.12.24-19:15:49.57@1: u32 [SYS_CMD]=2 0x2 2.0.0.0
  1715. 2023.12.24-19:15:49.57@1: u32[0] [SYS_TO]=
  1716. 2023.12.24-19:15:49.57@1: u32[2] [SYS_FROM]=24, 0,
  1717. 2023.12.24-19:15:49.57@1: (TZ) wants to send
  1718. 2023.12.24-19:15:49.57@1: [CTUN-4]Start resolving: cloud2.mikrotik.com
  1719.  
  1720. @resolver@
  1721. 2023.12.24-19:15:49.57@0: cmd_resolve: cloud2.mikrotik.com
  1722. 2023.12.24-19:15:49.57@0: xxx: 0000: 00 09 63 6c 6f 75 64 32 00 09 0b 6d 69 6b 72 6f ..cloud2 ...mikro
  1723. 2023.12.24-19:15:49.57@0: 0010: 74 69 6b 00 0b 06 63 6f 6d 00 06 00 tik...co m...
  1724. 2023.12.24-19:15:49.57@0: q cloud2.mikrotik.com.:A:1: done reqs:0 dur:0 server failure
  1725.  
  1726. @cloud@
  1727. 2023.12.24-19:15:49.57@1: [CTUN-4][WARN] couldn't resolve. Scheduling next retry...
  1728. 2023.12.24-19:15:49.57@1: [CTUN-4]all unsubscribed
  1729. 2023.12.24-19:15:49.57@1: [CTUN-6]Start resolving: cloud2.mikrotik.com
  1730. 2023.12.24-19:15:49.57@1: [CTUN-4] next startConnection scheduled after secs: 30
  1731.  
  1732. @resolver@
  1733. 2023.12.24-19:15:49.57@0: cmd_resolve6: cloud2.mikrotik.com
  1734. 2023.12.24-19:15:49.57@0: q cloud2.mikrotik.com.:AAAA:2: done reqs:0 dur:0 server failure
  1735.  
  1736. @cloud@
  1737. 2023.12.24-19:15:49.57@1: [CTUN-6][WARN] couldn't resolve. Scheduling next retry...
  1738. 2023.12.24-19:15:49.57@1: [CTUN-6]all unsubscribed
  1739. 2023.12.24-19:15:49.57@1: [CTUN-6] next startConnection scheduled after secs: 30
  1740.  
  1741. @portman@
  1742. 2023.12.24-19:15:49.64@3: init
  1743.  
  1744. @loader@
  1745. 2023.12.24-19:15:49.64@1: ( static( pname=portman pid=206 ) local( WAITING) peer(52,ffffffff,,BADID) ) entering state READY
  1746. 2023.12.24-19:15:49.64@1: ( static( pname=portman pid=206 ) local( READY) peer(52,ffffffff,,BADID) ) sending READY_CONFIRM message
  1747. 2023.12.24-19:15:49.64@1: ( static( pname=portman pid=206 ) local( READY) peer(52,ffffffff,,BADID) ) flusing queue
  1748.  
  1749. @portman@
  1750. 2023.12.24-19:15:49.65@3: perm store empty
  1751. 2023.12.24-19:15:49.68@3: checkPorts
  1752.  
  1753. @loader@
  1754. 2023.12.24-19:15:49.68@1: ( static( pname=portman pid=206 ) local( READY) peer(52,ffffffff,,BADID) ) entering state RUNNING
  1755. 2023.12.24-19:15:49.68@1: ( static( pname=portman pid=206 ) local( RUNNING) peer(52,ffffffff,,BADID) )SETUP timeout to:2000
  1756. 2023.12.24-19:15:49.68@1: checkForFreeMemory
  1757.  
  1758. @sys2@
  1759. 2023.12.24-19:15:49.68@3: init booter
  1760.  
  1761. @syslog@
  1762. 2023.12.24-19:15:49.70@3: [ 10.900221] rb: starting...
  1763. 2023.12.24-19:15:49.70@3: [ 10.900407] rb: started
  1764. 2023.12.24-19:15:49.70@3: [ 10.900555] rb_ioctl, cmd: 0x520f, arg: 0x0
  1765. 2023.12.24-19:15:49.70@3: [ 10.900565] rb: RB_GET_TYPE
  1766.  
  1767. @sys2@
  1768. 2023.12.24-19:15:49.70@3: BooterCfg::start()
  1769. 2023.12.24-19:15:49.70@3: Holder init - done
  1770. 2023.12.24-19:15:49.70@3: cfgSize = 4096
  1771.  
  1772. @syslog@
  1773. 2023.12.24-19:15:49.70@3: [ 10.900742] rb_ioctl, cmd: 0x5201, arg: 0x0
  1774. 2023.12.24-19:15:49.70@3: [ 10.900751] rb: RB_CFG_SIZE
  1775. 2023.12.24-19:15:49.70@3: [ 10.900773] rb_ioctl, cmd: 0x5203, arg: 0xf7fec4c0
  1776. 2023.12.24-19:15:49.70@3: [ 10.900781] rb: RB_READ_CFG
  1777.  
  1778. @sys2@
  1779. 2023.12.24-19:15:49.70@3: baudrate = 0
  1780. 2023.12.24-19:15:49.70@3: s_version = 7.13
  1781. 2023.12.24-19:15:49.70@3: s_ver_build = 7.13 built by agent at Dec/14/2023 09:29:04
  1782. 2023.12.24-19:15:49.70@3: nfoSize = 65536
  1783.  
  1784. @syslog@
  1785. 2023.12.24-19:15:49.70@3: [ 10.902190] rb_ioctl, cmd: 0x5202, arg: 0x0
  1786. 2023.12.24-19:15:49.70@3: [ 10.902201] rb: RB_INFO_SIZE
  1787. 2023.12.24-19:15:49.70@3: [ 10.902300] rb_ioctl, cmd: 0x5204, arg: 0xe0010
  1788. 2023.12.24-19:15:49.70@3: [ 10.902310] rb: RB_READ_INFO
  1789.  
  1790. @sys2@
  1791. 2023.12.24-19:15:49.72@3: ID_BOARD_NAME = cAPGi-5HaxD2HaxD
  1792. 2023.12.24-19:15:49.72@3: cfg->marketName = cAP ax
  1793. 2023.12.24-19:15:49.72@3: p_version = 7.8
  1794.  
  1795. @syslog@
  1796. 2023.12.24-19:15:49.72@3: [ 10.917506] probe_er_radio_data chunkid 3 caldataid 3
  1797.  
  1798. @route@
  1799. 2023.12.24-19:15:49.77@3: BFD BFD cfg apply schedule after 50 jiffies
  1800.  
  1801. @sys2@
  1802. 2023.12.24-19:15:49.82@0: found valid firmware /etc/ipq6000-7.13.fwf
  1803. 2023.12.24-19:15:49.82@0: start PoE handler.
  1804. 2023.12.24-19:15:49.82@0: PoEOutHandler::PoEOutHandler()
  1805. 2023.12.24-19:15:49.82@0: PoeParm::PoeParm()
  1806. 2023.12.24-19:15:49.82@0: read from [/sys/devices/virtual/misc/hwmon_poe/rb_max_self_power] failed
  1807. 2023.12.24-19:15:49.82@0: read from [/sys/devices/virtual/misc/hwmon_poe/power0_max] failed
  1808. 2023.12.24-19:15:49.82@0: read from [/sys/devices/virtual/misc/hwmon_poe/psu1_poe_out_power] failed
  1809. 2023.12.24-19:15:49.82@0: read from [/sys/devices/virtual/misc/hwmon_poe/psu1_def_power] failed
  1810. 2023.12.24-19:15:49.82@0: read from [/sys/devices/virtual/misc/hwmon_poe/psu2_poe_out_power] failed
  1811. 2023.12.24-19:15:49.82@0: read from [/sys/devices/virtual/misc/hwmon_poe/psu2_def_power] failed
  1812. 2023.12.24-19:15:49.82@0: PoeParm::PoeParm()
  1813. 2023.12.24-19:15:49.82@0: read from [/sys/devices/virtual/misc/hwmon_poe/rb_max_self_power] failed
  1814. 2023.12.24-19:15:49.82@0: read from [/sys/devices/virtual/misc/hwmon_poe/power0_max] failed
  1815. 2023.12.24-19:15:49.82@0: read from [/sys/devices/virtual/misc/hwmon_poe/psu1_poe_out_power] failed
  1816. 2023.12.24-19:15:49.82@0: read from [/sys/devices/virtual/misc/hwmon_poe/psu1_def_power] failed
  1817. 2023.12.24-19:15:49.82@0: read from [/sys/devices/virtual/misc/hwmon_poe/psu2_poe_out_power] failed
  1818. 2023.12.24-19:15:49.82@0: read from [/sys/devices/virtual/misc/hwmon_poe/psu2_def_power] failed
  1819. 2023.12.24-19:15:49.82@0: PoEOutHandler::doSet()
  1820. 2023.12.24-19:15:49.82@0: PoEOutHandler::setShortCurrProtection()
  1821. 2023.12.24-19:15:49.82@0: write to [/sys/devices/virtual/misc/hwmon_poe/psu1_poe_out_power] failed
  1822. 2023.12.24-19:15:49.82@0: write to [/sys/devices/virtual/misc/hwmon_poe/psu2_poe_out_power] failed
  1823. 2023.12.24-19:15:49.84@0: Failed to open usbler dev: No such file or directory
  1824. 2023.12.24-19:15:49.84@0: init pacman
  1825. 2023.12.24-19:15:49.84@0: init upgrader
  1826. 2023.12.24-19:15:49.84@0: swos: unknown board cAPGi-5HaxD2HaxD
  1827. 2023.12.24-19:15:49.84@0: init pci
  1828. 2023.12.24-19:15:49.84@0: init usb
  1829. 2023.12.24-19:15:49.84@0: init panicsaver
  1830.  
  1831. @led@
  1832. 2023.12.24-19:15:49.85@0: system triggers: [none] dark-mode-trigger timer default-on group0.0 group0.1 group0.2 group0.3 group0.4 group0.5 group0.6 group0.7 group1.0 group1.1 group1.2 group1.3 group1.4 group1.5 group1.6 group1.7 group2.0 group2.1 group2.2 group2.3 group2.4 group2.5 group2.6 group2.7 group3.0 group3.1 group3.2 group3.3 group3.4 group3.5 group3.6 group3.7 rfkill-any rfkill-none
  1833.  
  1834. @sys2@
  1835. 2023.12.24-19:15:49.86@0: init done
  1836.  
  1837. @loader@
  1838. 2023.12.24-19:15:49.86@1: ( static( pname=sys2 pid=142 ) local( READY) peer(24,ffffffff,,BADID) ) entering state RUNNING
  1839.  
  1840. @syslog@
  1841. 2023.12.24-19:15:49.86@0: [ 11.059570] flash: writing cfg id = 23, size = 4
  1842.  
  1843. @discover@
  1844. 2023.12.24-19:15:49.86@2: board name: cAPGi-5HaxD2HaxD neighbours->max: 14848
  1845. 2023.12.24-19:15:49.86@2: rosIdentity: MikroTik
  1846.  
  1847. @cerm@
  1848. 2023.12.24-19:15:49.86@0: free hdd 97280
  1849.  
  1850. @log@
  1851. 2023.12.24-19:15:49.86@2: REC 10: ready
  1852. 2023.12.24-19:15:49.86@2: REC 10: 1 subscribe dns
  1853. 2023.12.24-19:15:49.86@2: REC 10: 1 notify off
  1854.  
  1855. @dhcpclient@
  1856. 2023.12.24-19:15:49.86@2: adding comm6 for 1 0xf7feef98
  1857. 2023.12.24-19:15:49.86@2: Client6Handler::init() done, 1 clients
  1858.  
  1859. @cerm@
  1860. 2023.12.24-19:15:49.86@0: reading store
  1861.  
  1862. @dhcpclient@
  1863. 2023.12.24-19:15:49.86@2: wifi1//3/0/0 0x0 down -----------------
  1864. 2023.12.24-19:15:49.86@2: wifi2//4/0/0 0x0 down -----------------
  1865. 2023.12.24-19:15:49.86@2: unseen ifaces: 1
  1866.  
  1867. @loader@
  1868. 2023.12.24-19:15:49.86@1: ( static( pname=dhcpclient pid=145 ) local( READY) peer(43,ffffffff,,BADID) ) entering state RUNNING
  1869. 2023.12.24-19:15:49.86@1: ( static( pname=cerm pid=203 ) local( READY) peer(19,ffffffff,,BADID) ) entering state RUNNING
  1870. 2023.12.24-19:15:49.86@1: ( static( pname=cerm pid=203 ) local( RUNNING) peer(19,ffffffff,,BADID) )SETUP timeout to:1000
  1871. 2023.12.24-19:15:49.86@1: checkForFreeMemory
  1872.  
  1873. @dhcpclient@
  1874. 2023.12.24-19:15:49.86@2: ether1//1/0/0 0x2 down -H---------------
  1875. 2023.12.24-19:15:49.86@2: MAC changed ether1 48:A9:8A:C1:AC:58
  1876. 2023.12.24-19:15:49.86@2: change iface ether1
  1877.  
  1878. @ipsec@
  1879. 2023.12.24-19:15:49.86@0: NETLINK: bind family 6 groups 3
  1880. 2023.12.24-19:15:49.86@0: ---peers---
  1881. 2023.12.24-19:15:49.86@0: ---identities---
  1882.  
  1883. @syslog@
  1884. 2023.12.24-19:15:49.86@1: [ 11.062221] flash_ioctl: programming injected settings id 23
  1885.  
  1886. @ipsec@
  1887. 2023.12.24-19:15:49.86@0: ---policies---
  1888. 2023.12.24-19:15:49.86@0: policy rebuild 1
  1889. 2023.12.24-19:15:49.86@0: policy insertions: 0
  1890. 2023.12.24-19:15:49.86@0: ---transport init---
  1891. 2023.12.24-19:15:49.86@0: ---check start---
  1892. 2023.12.24-19:15:49.86@0: ---ok---
  1893.  
  1894. @loader@
  1895. 2023.12.24-19:15:49.86@1: ( static( pname=ipsec pid=150 ) local( READY) peer(85,ffffffff,,BADID) ) entering state RUNNING
  1896. 2023.12.24-19:15:49.86@1: ( static( pname=ipsec pid=150 ) local( RUNNING) peer(85,ffffffff,,BADID) )SETUP timeout to:1000
  1897. 2023.12.24-19:15:49.86@1: checkForFreeMemory
  1898.  
  1899. @ipsec@
  1900. 2023.12.24-19:15:49.87@0: got pfkey 0 X_SPDFLUSH
  1901. 2023.12.24-19:15:49.87@0: got pfkey 0 FLUSH
  1902.  
  1903. @sys2@
  1904. 2023.12.24-19:15:49.87@1: cmd tick
  1905. 2023.12.24-19:15:49.87@1: ctl 20 5000000 2 10
  1906. 2023.12.24-19:15:49.87@1: add tickTimer
  1907.  
  1908. @syslog@
  1909. 2023.12.24-19:15:50.13@1: [ 11.325957] qcom-pcie 20000000.pci: Phy link never came up
  1910.  
  1911. @mproxy@
  1912. 2023.12.24-19:15:50.22@3: set mac listen [] []
  1913.  
  1914. @sys2@
  1915. 2023.12.24-19:15:50.24@1: tickTimer
  1916.  
  1917. @syslog@
  1918. 2023.12.24-19:15:50.26@1: [ 11.457115] qcom-pcie 20000000.pci: cannot initialize host
  1919. 2023.12.24-19:15:50.26@1: [ 11.457254] qcom-pcie: probe of 20000000.pci failed with error -110
  1920.  
  1921. @modprobed@
  1922. 2023.12.24-19:15:50.26@1: +pcie-qcom.ko
  1923.  
  1924. @route@
  1925. 2023.12.24-19:15:50.28@0: POLICY recompile later
  1926. 2023.12.24-19:15:50.28@0: PolicyTask recompile
  1927. 2023.12.24-19:15:50.28@3: BFD BFD cfg apply schedule after 50 jiffies
  1928. 2023.12.24-19:15:50.28@0: rpki:
  1929. 2023.12.24-19:15:50.28@0: address-lists:
  1930. 2023.12.24-19:15:50.28@0: num-sets:
  1931. 2023.12.24-19:15:50.28@0: community-sets:
  1932. 2023.12.24-19:15:50.28@0: ext-community-sets:
  1933. 2023.12.24-19:15:50.28@0: large-community-sets:
  1934. 2023.12.24-19:15:50.28@0: fchains:
  1935. 2023.12.24-19:15:50.28@0: schains:
  1936. 2023.12.24-19:15:50.28@0: PolicyTask recompile done
  1937.  
  1938. @log@
  1939. 2023.12.24-19:15:50.28@2: REC 11: ready
  1940. 2023.12.24-19:15:50.28@2: REC 11: 1 subscribe route,rpki,debug
  1941. 2023.12.24-19:15:50.28@2: REC 11: 1 notify off
  1942.  
  1943. @route@
  1944. 2023.12.24-19:15:50.28@3: inhibit sleep, policy update
  1945.  
  1946. @log@
  1947. 2023.12.24-19:15:50.28@2: REC 12: ready
  1948. 2023.12.24-19:15:50.28@2: REC 12: 1 subscribe route,debug,calc
  1949. 2023.12.24-19:15:50.28@2: REC 12: 1 notify off
  1950.  
  1951. @syslog@
  1952. 2023.12.24-19:15:50.29@1: [ 11.484848] qcom-ipq-hwmon 4a8000.thermal-sensor: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
  1953.  
  1954. @modprobed@
  1955. 2023.12.24-19:15:50.29@1: +ipqhwmon.ko
  1956.  
  1957. @moduler@
  1958. 2023.12.24-19:15:50.29@3: add@/devices/platform/soc/4a8000.thermal-sensor/hwmon/hwmon0
  1959.  
  1960. @modprobed@
  1961. 2023.12.24-19:15:50.30@1: +dwc3-of-simple.ko
  1962. 2023.12.24-19:15:50.30@1: +usb-common.ko
  1963.  
  1964. @syslog@
  1965. 2023.12.24-19:15:50.32@1: [ 11.515413] dwc3-qcom 8af8800.usb30: GPIO lookup for consumer device-power
  1966. 2023.12.24-19:15:50.32@1: [ 11.515432] dwc3-qcom 8af8800.usb30: using device tree for GPIO lookup
  1967. 2023.12.24-19:15:50.32@1: [ 11.515452] of_get_named_gpiod_flags: can't parse 'device-power-gpios' property of node '/soc/usb30@8A00000[0]'
  1968. 2023.12.24-19:15:50.32@1: [ 11.515465] of_get_named_gpiod_flags: can't parse 'device-power-gpio' property of node '/soc/usb30@8A00000[0]'
  1969. 2023.12.24-19:15:50.32@1: [ 11.515475] dwc3-qcom 8af8800.usb30: using lookup tables for GPIO lookup
  1970. 2023.12.24-19:15:50.32@1: [ 11.515483] dwc3-qcom 8af8800.usb30: No GPIO consumer device-power found
  1971.  
  1972. @moduler@
  1973. 2023.12.24-19:15:50.32@3: add@/devices/platform/soc/8af8800.usb30/8a00000.dwc3
  1974. 2023.12.24-19:15:50.32@3: MODALIAS=of:Ndwc3T(null)Csnps,dwc3
  1975.  
  1976. @modprobed@
  1977. 2023.12.24-19:15:50.32@1: +dwc3-qcom.ko
  1978.  
  1979. @radvd@
  1980. 2023.12.24-19:15:50.41@3: accept RA: 1
  1981.  
  1982. @modprobed@
  1983. 2023.12.24-19:15:50.41@1: +prestera_dx_mac.ko
  1984. 2023.12.24-19:15:50.43@1: +prestera_pci.ko
  1985.  
  1986. @syslog@
  1987. 2023.12.24-19:15:50.46@1: [ 11.659530] Found mdio device 004dd0b2 on addrerss 00
  1988. 2023.12.24-19:15:50.46@1: [ 11.659547] MDIO sucessfully initialised
  1989.  
  1990. @sys2@
  1991. 2023.12.24-19:15:50.57@2: found /sys/class/hwmon/hwmon0
  1992.  
  1993. @route@
  1994. 2023.12.24-19:15:50.77@3: Evicting 0x20180000..0x201c0000
  1995. 2023.12.24-19:15:50.77@3: Reclaimed 1 blocks
  1996. 2023.12.24-19:15:50.78@3: BFD BFD cfg apply schedule after 50 jiffies
  1997. 2023.12.24-19:15:51.28@3: BFD BFD cfg apply schedule after 50 jiffies
  1998. 2023.12.24-19:15:51.78@3: BFD BFD cfg apply schedule after 50 jiffies
  1999. 2023.12.24-19:15:52.28@0: BFD BFD cfg apply schedule after 50 jiffies
  2000. 2023.12.24-19:15:52.78@0: BFD BFD cfg apply schedule after 50 jiffies
  2001. 2023.12.24-19:15:53.28@0: BFD BFD cfg apply schedule after 50 jiffies
  2002. 2023.12.24-19:15:53.78@0: BFD BFD cfg apply schedule after 50 jiffies
  2003. 2023.12.24-19:15:54.28@0: BFD BFD cfg apply schedule after 50 jiffies
  2004.  
  2005. @syslog@
  2006. 2023.12.24-19:15:54.67@0: [ 15.866224] port scheduler num= 50
  2007. 2023.12.24-19:15:54.67@0: [ 15.866268] tdm setup num=96
  2008.  
  2009. @route@
  2010. 2023.12.24-19:15:54.78@0: BFD BFD cfg apply schedule after 50 jiffies
  2011. 2023.12.24-19:15:55.28@0: BFD BFD cfg apply schedule after 50 jiffies
  2012. 2023.12.24-19:15:55.78@0: BFD BFD cfg apply schedule after 50 jiffies
  2013.  
  2014. @syslog@
  2015. 2023.12.24-19:15:56.12@1: [ 17.315927] sw_hk_ppe_init
  2016.  
  2017. @moduler@
  2018. 2023.12.24-19:15:56.12@3: add@/devices/platform/soc/3a000000.ess-switch/net/switch0
  2019. 2023.12.24-19:15:56.12@3: INTERFACE=switch0
  2020. 2023.12.24-19:15:56.12@3: IFINDEX=4
  2021. 2023.12.24-19:15:56.12@3: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-0
  2022. 2023.12.24-19:15:56.12@3: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-1
  2023. 2023.12.24-19:15:56.12@3: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-2
  2024. 2023.12.24-19:15:56.12@3: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-3
  2025. 2023.12.24-19:15:56.12@3: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-4
  2026. 2023.12.24-19:15:56.12@3: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-5
  2027. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-6
  2028. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-7
  2029. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-8
  2030. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-9
  2031. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-10
  2032. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-11
  2033. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-12
  2034. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-13
  2035. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-14
  2036. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-15
  2037. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-16
  2038. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-17
  2039. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-18
  2040. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-19
  2041. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-20
  2042. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-21
  2043. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-22
  2044. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-23
  2045. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-24
  2046. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-25
  2047. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-26
  2048. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-27
  2049. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-28
  2050. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-29
  2051. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-30
  2052. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-31
  2053. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-32
  2054. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-33
  2055. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-34
  2056. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-35
  2057. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-36
  2058. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-37
  2059. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-38
  2060. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-39
  2061. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-40
  2062. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-41
  2063. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-42
  2064. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-43
  2065. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-44
  2066. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-45
  2067. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-46
  2068. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-47
  2069. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-48
  2070. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-49
  2071. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-50
  2072. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-51
  2073. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-52
  2074. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-53
  2075. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-54
  2076. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-55
  2077. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-56
  2078. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-57
  2079. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-58
  2080. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-59
  2081. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-60
  2082. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-61
  2083. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-62
  2084. 2023.12.24-19:15:56.13@1: add@/devices/platform/soc/3a000000.ess-switch/net/switch0/queues/tx-63
  2085.  
  2086. @route@
  2087. 2023.12.24-19:15:56.28@0: BFD BFD cfg apply schedule after 50 jiffies
  2088. 2023.12.24-19:15:56.78@0: BFD BFD cfg apply schedule after 50 jiffies
  2089.  
  2090. @syslog@
  2091. 2023.12.24-19:15:56.86@1: [ 18.060733] switch0: max_tx_buffers_per_port=255, tx_buffer_count=512, cpu_port_count=1, stat_count=1, port_count=2, max_tx_buffers_per_pack=1, num_tx_queues:64
  2092.  
  2093. @net@
  2094. 2023.12.24-19:15:56.86@3: SWITCHES: add switch0 id:0 type:22
  2095.  
  2096. @modprobed@
  2097. 2023.12.24-19:15:56.86@1: +hk_eth.ko
  2098.  
  2099. @net@
  2100. 2023.12.24-19:15:56.86@3: switch1 config: vlanLookup:00ff0006 one2one:00000001 l2:0e00012c analyzerSel:00000000 protFltr:00000000 00000000 00000000 00000000 00000000 mirrFmt:0000fc00 mirrRatio:00000000 egSampling:00000000: init
  2101. 2023.12.24-19:15:56.87@3: (eth0#5): phy id 4dd0b2
  2102.  
  2103. @modprobed@
  2104. 2023.12.24-19:15:56.87@1: +rpmsg_char.ko
  2105.  
  2106. @syslog@
  2107. 2023.12.24-19:15:56.87@3: [ 18.067820] PoE-out simple
  2108. 2023.12.24-19:15:56.87@3: [ 18.067860] of_get_named_gpiod_flags: can't parse 'gpi_status_valid' property of node '/poe_out_simple[0]'
  2109. 2023.12.24-19:15:56.87@3: [ 18.067894] of_get_named_gpiod_flags: parsed 'gpi_status' property of node '/poe_out_simple[0]' - status (0)
  2110. 2023.12.24-19:15:56.87@3: [ 18.067923] of_get_named_gpiod_flags: parsed 'gpo_on' property of node '/poe_out_simple[0]' - status (0)
  2111.  
  2112. @net@
  2113. 2023.12.24-19:15:56.87@3: (eth0#5): addDevFile poe found @/dev/poe fd=12
  2114.  
  2115. @modprobed@
  2116. 2023.12.24-19:15:56.87@1: +qcom_sysmon.ko
  2117. 2023.12.24-19:15:56.89@1: +qcom_common.ko
  2118. 2023.12.24-19:15:56.89@3: +qcom_q6v5.ko
  2119. 2023.12.24-19:15:56.89@3: +mdt_loader.ko
  2120.  
  2121. @syslog@
  2122. 2023.12.24-19:15:56.89@3: [ 18.091702] remoteproc remoteproc0: cd00000.qcom_q6v5_wcss is available
  2123.  
  2124. @moduler@
  2125. 2023.12.24-19:15:56.89@3: add@/devices/platform/soc/cd00000.qcom_q6v5_wcss/remoteproc/remoteproc0
  2126. 2023.12.24-19:15:56.89@3: DEVTYPE=remoteproc
  2127.  
  2128. @modprobed@
  2129. 2023.12.24-19:15:56.89@3: +qcom_q6v5_wcss.ko
  2130. 2023.12.24-19:15:56.89@3: +qcom_q6v5_mpd.ko
  2131. 2023.12.24-19:15:56.90@3: +qrtr-smd.ko
  2132.  
  2133. @syslog@
  2134. 2023.12.24-19:15:56.91@3: [ 18.110307] qdf: loading out-of-tree module taints kernel.
  2135.  
  2136. @modprobed@
  2137. 2023.12.24-19:15:56.92@3: +qdf.ko
  2138. 2023.12.24-19:15:56.92@3: +mem_manager.ko
  2139.  
  2140. @syslog@
  2141. 2023.12.24-19:15:57.00@1: [ 18.202895] eth0: phy reg access: 1024458ns
  2142.  
  2143. @net@
  2144. 2023.12.24-19:15:57.02@1: VRF: ether1 cur: main
  2145. 2023.12.24-19:15:57.03@1: (eth1#6): phy id 4dd0b2
  2146.  
  2147. @syslog@
  2148. 2023.12.24-19:15:57.06@1: [ 18.255121] poe_simple set_mode 2
  2149.  
  2150. @net@
  2151. 2023.12.24-19:15:57.06@1: VRF: ether2 cur: main
  2152.  
  2153. @dhcpclient@
  2154. 2023.12.24-19:15:57.06@2: ether1/eth0/1/5/0 0x4041 down --LE----------p--
  2155. 2023.12.24-19:15:57.06@2: link change eth0
  2156. 2023.12.24-19:15:57.06@2: link setup eth0 0
  2157. 2023.12.24-19:15:57.06@2: link setup eth0 1
  2158. 2023.12.24-19:15:57.06@2: change iface ether1
  2159. 2023.12.24-19:15:57.06@2: ether2/eth1/2/6/0 0x4041 down --LE----------p--
  2160. 2023.12.24-19:15:57.06@2: ether1/eth0/1/5/0 0x4441 down --LE-U--------p--
  2161. 2023.12.24-19:15:57.06@2: change iface ether1
  2162. 2023.12.24-19:15:57.07@2: ether2/eth1/2/6/0 0x4441 down --LE-U--------p--
  2163.  
  2164. @syslog@
  2165. 2023.12.24-19:15:57.17@1: [ 18.368152] eth0: Caught tx_queue_len zero misconfig
  2166. 2023.12.24-19:15:57.17@1: [ 18.368623] eth1: Caught tx_queue_len zero misconfig
  2167.  
  2168. @quickset@
  2169. 2023.12.24-19:15:57.22@2: caps=32768
  2170.  
  2171. @route@
  2172. 2023.12.24-19:15:57.28@0: BFD BFD cfg apply schedule after 50 jiffies
  2173.  
  2174. @led@
  2175. 2023.12.24-19:15:57.36@0: system triggers: [none] dark-mode-trigger timer default-on group0.0 group0.1 group0.2 group0.3 group0.4 group0.5 group0.6 group0.7 group1.0 group1.1 group1.2 group1.3 group1.4 group1.5 group1.6 group1.7 group2.0 group2.1 group2.2 group2.3 group2.4 group2.5 group2.6 group2.7 group3.0 group3.1 group3.2 group3.3 group3.4 group3.5 group3.6 group3.7 rfkill-any rfkill-none poe-out
  2176.  
  2177. @syslog@
  2178. 2023.12.24-19:15:57.42@2: [ 18.617245] wlan: [159:I:RPTR] qca_multi_link_init_module:
  2179. 2023.12.24-19:15:57.42@2: [ 18.617245] ******QCA Repeater Initialization Done***********
  2180. 2023.12.24-19:15:57.42@2: [ 18.617245]
  2181. 2023.12.24-19:15:57.42@2: [ 18.621810] wlan: [159:I:ANY] qdf_ini_parse: INI values read: 81
  2182. 2023.12.24-19:15:57.42@2: [ 18.621822] wlan: [159:I:ANY] qdf_ini_parse: INI file parse successful
  2183. 2023.12.24-19:15:57.43@2: [ 18.624871] wlan: [159:I:ANY] qdf_ini_parse: INI values read: 56
  2184. 2023.12.24-19:15:57.43@2: [ 18.624881] wlan: [159:I:ANY] qdf_ini_parse: INI file parse successful
  2185. 2023.12.24-19:15:57.43@2: [ 18.624892] wlan: [159:I:ANY] wlan_sawf_init: SAWF: SAWF ctx is initialized
  2186.  
  2187. @modprobed@
  2188. 2023.12.24-19:15:57.43@2: +umac.ko
  2189.  
  2190. @syslog@
  2191. 2023.12.24-19:15:57.46@2: [ 18.655739] wifi-iface-skip-bmap=6
  2192. 2023.12.24-19:15:57.46@2: [ 18.655762] cnss[2]: INFO: No board_id entry in device tree
  2193. 2023.12.24-19:15:57.46@2: [ 18.655768] cnss[2]: DBG: cnss_probe: board_id_override 0x0 for device QCA6018
  2194. 2023.12.24-19:15:57.46@2: [ 18.655775] Looking for "IPQ6018/bdwlan.bin"
  2195. 2023.12.24-19:15:57.46@2: [ 18.656027] cnss2 c000000.wifiCP: Direct firmware load for IPQ6018/bdwlan.bin failed with error -2
  2196. 2023.12.24-19:15:57.46@2: [ 18.656037] cnss2 c000000.wifiCP: Falling back to sysfs fallback for: IPQ6018/bdwlan.bin
  2197.  
  2198.  
  2199. package
  2200. .profile
  2201. .livetrace
  2202. oops
  2203. backtrace
  2204. log
  2205. resource
  2206. instchk
  2207. history
  2208. export
  2209. pci
  2210. usb
  2211. interface
  2212. ethernet
  2213. switch
  2214. dot1x
  2215. address
  2216. port
  2217. arp
  2218. ip
  2219. routing
  2220. user
  2221. firewall
  2222. firewall-stats
  2223. bridge
  2224. bridge-controller
  2225. mesh
  2226. queue
  2227. queue-packets
  2228. queue-bytes
  2229. queue-stats
  2230. ippool
  2231. certificate
  2232. profile
  2233. neighbor
  2234. license
  2235. cloud
  2236. store
  2237. partitions
  2238. file
  2239. routerboard
  2240. webproxy
  2241. ntp-client
  2242. kid-control
  2243. health
  2244. poe-out
  2245. lcdtouch
  2246. hotspot
  2247. kvm
  2248. ups
  2249. ipsec
  2250. address6
  2251. pool6
  2252. neighbor6
  2253. firewall6
  2254. firewall6-stats
  2255. dhcp
  2256. dhcp6
  2257. ppp
  2258. bfd
  2259. bgp
  2260. ospf
  2261. rip
  2262. mpls
  2263. pimsm
  2264. igmp-proxy
  2265. wireless
  2266. w60g
  2267. dude
  2268. gps
  2269. lora
  2270. container
  2271. wireguard
  2272. tr069
  2273. (c) 2005 - 2022 k3dt
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!