Agat-Aquarius

Elbrus 401-PC boot log (serial console) - automatic

Jan 25th, 2016
1,741
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. CPU#F0: BOOT started.
  2. CPU#F0: BOOT E2S
  3. CPU#F0: VERSION: release-2.13.3.0-E2S ::::::: ( /tags/release-2.13.3.0-E2S at revision 3816 )
  4. CPU#F0: BUILT BY neo
  5. CPU#F0: TARGET: mono
  6. CPU#F0: ON Nov 2 2015
  7. CPU#F0: AT 18:05:37
  8. CPU#F0: COMPILER: lcc:1.17.12:Nov-27-2012:e2k-linux.cross:i386-linux Thread model: posix gcc version 3.4.6 compatible.
  9. CPU#F0: FLAGS: -DDEBUG_TEST_BOOTBLOCK -DALLOC_IDE_PRD_TBL_STATICALLY -DISO9660_USE_CASH -DISO9660_MANGLING_NAMES -DINITRD -DISO9660_USE_LOCAL_HEAP -DMCST_SATA -DMCST2_SATA -DNEW_AHCI_ATAPI -DDEBUG_TESTS -DRESET_REQUEST_ENABLE -DENABLE_STDP -DFAT_EFI_SUPPORT -DPCC_SIMULATE_CARD_OS_STARTED_THEN_START -DPCC_READ_CARD_FILES_BY_PARTS -DDO_NOT_INIT_MGA_IF_MGA_3D_PRESENT -DBUG52542 -DENABLE_X86EMU_VIDEO_INIT -DRELEASE
  10.  
  11. Units BIST checking:
  12. CU_HW0:
  13. Chain File OK
  14. TU IP OK
  15. IB ITAG OK
  16. IB ITLB Data OK
  17. IB IDATA nm OK
  18. IB IDATA cnt OK
  19. MU_HW0:
  20. AAU APB OK
  21. MAU STB OK
  22. Cluster 1 DTLB OK
  23. Cluster 0 DTLB OK
  24. L1 cache BIST checking.
  25. CPU#F0:
  26. CPU#F0: L2 cache
  27. CPU#F0: BANK#0: BIST_SIG1=0x0000000000000000, BIST_SIG2=0x0000000000000000
  28. CPU#F0: BANK#1: BIST_SIG1=0x0000000000000000, BIST_SIG2=0x0000000000000000
  29. CPU#F0: BANK#2: BIST_SIG1=0x0000000000000000, BIST_SIG2=0x0000000000000000
  30. CPU#F0: BANK#3: BIST_SIG1=0x0000000000000000, BIST_SIG2=0x0000000000000000
  31. CPU#F0:
  32. tmr_hz = 0x000000002FAF10DF (0800 MHz)
  33.  
  34. CPU#F0: Skipping CPU clock frequency changing.
  35. CPU#F0: E2S rev.2 IPCC hardware bug workaround
  36. CPU#F0: Configure local SIC:
  37. CPU#F0: Link 1: Idle
  38. CPU#F0: Link 2: Idle
  39. CPU#F0: Link 3: Idle
  40. CPU#F0: Change own address to 00
  41. CPU#00: SIC configuring is finished
  42. CPU#00: Enable coherence
  43. CPU#00: Configure chipset with defaults
  44. CPU#00: Warning: Software reset.
  45. Init memory controller
  46. Checking known memory modules:
  47. Channel 0:
  48. Slot 0: DDR3 SDRAM 8192Mb RDIMM 2Rx8 9965426-402.A00LF
  49. Slot 1: empty
  50. Channel 1:
  51. Slot 0: DDR3 SDRAM 8192Mb RDIMM 2Rx8 9965426-402.A00LF
  52. Slot 1: empty
  53. Channel 2:
  54. Slot 0: DDR3 SDRAM 8192Mb RDIMM 2Rx8 9965426-402.A00LF
  55. Slot 1: empty
  56. Setup SIC_HW1:
  57. SIC_HW1 = 0x00000076
  58. Changing MC/CPU frequency ratio... done.
  59. Disable channel 0
  60. Disable channel 1
  61. Disable channel 2
  62. channel 0
  63. Init DDR3 PHY
  64. DDR3 frequency: 1066MHz
  65. Wait primary init: done
  66. DDR3 PHY init error
  67. PGSR0: 0x828003FF
  68. Errors:
  69. Write leveling adjustment error
  70. Write bit deskew error1m
  71. CPU#F0: BOOT started.
  72. CPU#F0: BOOT E2S
  73. CPU#F0: VERSION: release-2.13.3.0-E2S ::::::: ( /tags/release-2.13.3.0-E2S at revision 3816 )
  74. CPU#F0: BUILT BY neo
  75. CPU#F0: TARGET: mono
  76. CPU#F0: ON Nov 2 2015
  77. CPU#F0: AT 18:05:37
  78. CPU#F0: COMPILER: lcc:1.17.12:Nov-27-2012:e2k-linux.cross:i386-linux Thread model: posix gcc version 3.4.6 compatible.
  79. CPU#F0: FLAGS: -DDEBUG_TEST_BOOTBLOCK -DALLOC_IDE_PRD_TBL_STATICALLY -DISO9660_USE_CASH -DISO9660_MANGLING_NAMES -DINITRD -DISO9660_USE_LOCAL_HEAP -DMCST_SATA -DMCST2_SATA -DNEW_AHCI_ATAPI -DDEBUG_TESTS -DRESET_REQUEST_ENABLE -DENABLE_STDP -DFAT_EFI_SUPPORT -DPCC_SIMULATE_CARD_OS_STARTED_THEN_START -DPCC_READ_CARD_FILES_BY_PARTS -DDO_NOT_INIT_MGA_IF_MGA_3D_PRESENT -DBUG52542 -DENABLE_X86EMU_VIDEO_INIT -DRELEASE
  80.  
  81. Units BIST checking:
  82. CU_HW0:
  83. Chain File OK
  84. TU IP OK
  85. IB ITAG OK
  86. IB ITLB Data OK
  87. IB IDATA nm OK
  88. IB IDATA cnt OK
  89. MU_HW0:
  90. AAU APB OK
  91. MAU STB OK
  92. Cluster 1 DTLB OK
  93. Cluster 0 DTLB OK
  94. L1 cache BIST checking.
  95. CPU#F0:
  96. CPU#F0: L2 cache
  97. CPU#F0: BANK#0: BIST_SIG1=0x0000000000000000, BIST_SIG2=0x0000000000000000
  98. CPU#F0: BANK#1: BIST_SIG1=0x0000000000000000, BIST_SIG2=0x0000000000000000
  99. CPU#F0: BANK#2: BIST_SIG1=0x0000000000000000, BIST_SIG2=0x0000000000000000
  100. CPU#F0: BANK#3: BIST_SIG1=0x0000000000000000, BIST_SIG2=0x0000000000000000
  101. CPU#F0:
  102. tmr_hz = 0x000000002FAF10DF (0800 MHz)
  103.  
  104. CPU#F0: Skipping CPU clock frequency changing.
  105. CPU#F0: E2S rev.2 IPCC hardware bug workaround
  106. CPU#F0: Configure local SIC:
  107. CPU#F0: Link 1: Idle
  108. CPU#F0: Link 2: Idle
  109. CPU#F0: Link 3: Idle
  110. CPU#F0: Change own address to 00
  111. CPU#00: SIC configuring is finished
  112. CPU#00: Enable coherence
  113. CPU#00: Configure chipset with defaults
  114. CPU#00: Warning: Software reset.
  115. Init memory controller
  116. Checking known memory modules:
  117. Channel 0:
  118. Slot 0: DDR3 SDRAM 8192Mb RDIMM 2Rx8 9965426-402.A00LF
  119. Slot 1: empty
  120. Channel 1:
  121. Slot 0: DDR3 SDRAM 8192Mb RDIMM 2Rx8 9965426-402.A00LF
  122. Slot 1: empty
  123. Channel 2:
  124. Slot 0: DDR3 SDRAM 8192Mb RDIMM 2Rx8 9965426-402.A00LF
  125. Slot 1: empty
  126. Setup SIC_HW1:
  127. SIC_HW1 = 0x00000076
  128. Changing MC/CPU frequency ratio... done.
  129. Disable channel 0
  130. Disable channel 1
  131. Disable channel 2
  132. channel 0
  133. Init DDR3 PHY
  134. DDR3 frequency: 1066MHz
  135. Wait primary init: done
  136. DXnGSR20: 0x00000088
  137. Write bit deskew warning. wdwn: 0x1
  138. Write eye centering warning. wewn: 0x1
  139. DXnGSR21: 0x00000088
  140. Write bit deskew warning. wdwn: 0x1
  141. Write eye centering warning. wewn: 0x1
  142. DXnGSR22: 0x00000088
  143. Write bit deskew warning. wdwn: 0x1
  144. Write eye centering warning. wewn: 0x1
  145. DXnGSR23: 0x00000088
  146. Write bit deskew warning. wdwn: 0x1
  147. Write eye centering warning. wewn: 0x1
  148. DXnGSR24: 0x00000088
  149. Write bit deskew warning. wdwn: 0x1
  150. Write eye centering warning. wewn: 0x1
  151. DXnGSR25: 0x00000088
  152. Write bit deskew warning. wdwn: 0x1
  153. Write eye centering warning. wewn: 0x1
  154. DXnGSR26: 0x00000088
  155. Write bit deskew warning. wdwn: 0x1
  156. Write eye centering warning. wewn: 0x1
  157. DXnGSR27: 0x00000088
  158. Write bit deskew warning. wdwn: 0x1
  159. Write eye centering warning. wewn: 0x1
  160. DXnGSR28: 0x00000088
  161. Write bit deskew warning. wdwn: 0x1
  162. Write eye centering warning. wewn: 0x1
  163. Start channel 0
  164. Value 0xFFFFFFF9 from tras.get[1] is out of range (min 0x00000000, max 0x00000007).
  165. Value 0xFFFFFFFA from trc.get[1] is out of range (min 0x00000000, max 0x0000000F).
  166. Enable channel 0
  167. channel 1
  168. Init DDR3 PHY
  169. DDR3 frequency: 1066MHz
  170. Wait primary init: done
  171. DXnGSR20: 0x00000088
  172. Write bit deskew warning. wdwn: 0x1
  173. Write eye centering warning. wewn: 0x1
  174. DXnGSR21: 0x00000088
  175. Write bit deskew warning. wdwn: 0x1
  176. Write eye centering warning. wewn: 0x1
  177. DXnGSR22: 0x00000088
  178. Write bit deskew warning. wdwn: 0x1
  179. Write eye centering warning. wewn: 0x1
  180. DXnGSR23: 0x00000088
  181. Write bit deskew warning. wdwn: 0x1
  182. Write eye centering warning. wewn: 0x1
  183. DXnGSR24: 0x00000088
  184. Write bit deskew warning. wdwn: 0x1
  185. Write eye centering warning. wewn: 0x1
  186. DXnGSR25: 0x00000088
  187. Write bit deskew warning. wdwn: 0x1
  188. Write eye centering warning. wewn: 0x1
  189. DXnGSR26: 0x00000088
  190. Write bit deskew warning. wdwn: 0x1
  191. Write eye centering warning. wewn: 0x1
  192. DXnGSR27: 0x00000088
  193. Write bit deskew warning. wdwn: 0x1
  194. Write eye centering warning. wewn: 0x1
  195. DXnGSR28: 0x00000088
  196. Write bit deskew warning. wdwn: 0x1
  197. Write eye centering warning. wewn: 0x1
  198. Start channel 1
  199. Value 0xFFFFFFF9 from tras.get[1] is out of range (min 0x00000000, max 0x00000007).
  200. Value 0xFFFFFFFA from trc.get[1] is out of range (min 0x00000000, max 0x0000000F).
  201. Enable channel 1
  202. channel 2
  203. Init DDR3 PHY
  204. DDR3 frequency: 1066MHz
  205. Wait primary init: done
  206. DXnGSR20: 0x00000088
  207. Write bit deskew warning. wdwn: 0x1
  208. Write eye centering warning. wewn: 0x1
  209. DXnGSR21: 0x00000088
  210. Write bit deskew warning. wdwn: 0x1
  211. Write eye centering warning. wewn: 0x1
  212. DXnGSR22: 0x00000088
  213. Write bit deskew warning. wdwn: 0x1
  214. Write eye centering warning. wewn: 0x1
  215. DXnGSR23: 0x00000088
  216. Write bit deskew warning. wdwn: 0x1
  217. Write eye centering warning. wewn: 0x1
  218. DXnGSR24: 0x00000088
  219. Write bit deskew warning. wdwn: 0x1
  220. Write eye centering warning. wewn: 0x1
  221. DXnGSR25: 0x00000088
  222. Write bit deskew warning. wdwn: 0x1
  223. Write eye centering warning. wewn: 0x1
  224. DXnGSR26: 0x00000088
  225. Write bit deskew warning. wdwn: 0x1
  226. Write eye centering warning. wewn: 0x1
  227. DXnGSR27: 0x00000088
  228. Write bit deskew warning. wdwn: 0x1
  229. Write eye centering warning. wewn: 0x1
  230. Start channel 2
  231. Value 0xFFFFFFF9 from tras.get[1] is out of range (min 0x00000000, max 0x00000007).
  232. Value 0xFFFFFFFA from trc.get[1] is out of range (min 0x00000000, max 0x0000000F).
  233. Enable channel 2
  234. Init memory filters
  235. CPU#00: Setting MCs interleaving:
  236. CPU#00: SIC_MIC <--- 0x00000008
  237. CPU#00: SIC_MIC ---> 0x00000008
  238. Hardware memory clean
  239. Cleaning channel 0
  240. Amount of memory in channel: 8192Mb
  241. Cleaning done
  242. Cleaning channel 1
  243. Amount of memory in channel: 8192Mb
  244. Cleaning done
  245. Cleaning channel 2
  246. Amount of memory in channel: 8192Mb
  247. Cleaning done
  248. Checking SIC directory cache BIST...
  249. CPU#00: Setting the directory:
  250. CPU#00: SIC_SCCFG ---> 0x000000B0
  251. CPU#00: SIC_SCCFG <--- 0x00000090
  252. CPU#00:
  253. Warning:test MEM start BOOT skipped
  254. CPU#00: Loading ROM DATA and BSS to RAM
  255. CPU#00: BOOT FREE MEM ADDR:0x0042F000
  256. CPU#00: Starting CPU#00 Core#01 and going to sleep
  257. Units BIST checking:
  258. CU_HW0:
  259. Chain File OK
  260. TU IP OK
  261. IB ITAG OK
  262. IB ITLB Data OK
  263. IB IDATA nm OK
  264. IB IDATA cnt OK
  265. MU_HW0:
  266. AAU APB OK
  267. MAU STB OK
  268. Cluster 1 DTLB OK
  269. Cluster 0 DTLB OK
  270. L1 cache BIST checking.
  271. CPU#01:
  272. CPU#01: L2 cache
  273. CPU#01: BANK#0: BIST_SIG1=0x0000000000000000, BIST_SIG2=0x0000000000000000
  274. CPU#01: BANK#1: BIST_SIG1=0x0000000000000000, BIST_SIG2=0x0000000000000000
  275. CPU#01: BANK#2: BIST_SIG1=0x0000000000000000, BIST_SIG2=0x0000000000000000
  276. CPU#01: BANK#3: BIST_SIG1=0x0000000000000000, BIST_SIG2=0x0000000000000000
  277. CPU#01:
  278. CPU#01: Enable coherence
  279. CPU#01: APIC_ID: 0x01
  280. CPU#01: Waking up BSP with APIC_ID=0x00
  281. CPU#00: Starting CPU#00 Core#02 and going to sleep
  282. Units BIST checking:
  283. CU_HW0:
  284. Chain File OK
  285. TU IP OK
  286. IB ITAG OK
  287. IB ITLB Data OK
  288. IB IDATA nm OK
  289. IB IDATA cnt OK
  290. MU_HW0:
  291. AAU APB OK
  292. MAU STB OK
  293. Cluster 1 DTLB OK
  294. Cluster 0 DTLB OK
  295. L1 cache BIST checking.
  296. CPU#02:
  297. CPU#02: L2 cache
  298. CPU#02: BANK#0: BIST_SIG1=0x0000000000000000, BIST_SIG2=0x0000000000000000
  299. CPU#02: BANK#1: BIST_SIG1=0x0000000000000000, BIST_SIG2=0x0000000000000000
  300. CPU#02: BANK#2: BIST_SIG1=0x0000000000000000, BIST_SIG2=0x0000000000000000
  301. CPU#02: BANK#3: BIST_SIG1=0x0000000000000000, BIST_SIG2=0x0000000000000000
  302. CPU#02:
  303. CPU#02: Enable coherence
  304. CPU#02: APIC_ID: 0x02
  305. CPU#02: Waking up BSP with APIC_ID=0x00
  306. CPU#00: Starting CPU#00 Core#03 and going to sleep
  307. Units BIST checking:
  308. CU_HW0:
  309. Chain File OK
  310. TU IP OK
  311. IB ITAG OK
  312. IB ITLB Data OK
  313. IB IDATA nm OK
  314. IB IDATA cnt OK
  315. MU_HW0:
  316. AAU APB OK
  317. MAU STB OK
  318. Cluster 1 DTLB OK
  319. Cluster 0 DTLB OK
  320. L1 cache BIST checking.
  321. CPU#03:
  322. CPU#03: L2 cache
  323. CPU#03: BANK#0: BIST_SIG1=0x0000000000000000, BIST_SIG2=0x0000000000000000
  324. CPU#03: BANK#1: BIST_SIG1=0x0000000000000000, BIST_SIG2=0x0000000000000000
  325. CPU#03: BANK#2: BIST_SIG1=0x0000000000000000, BIST_SIG2=0x0000000000000000
  326. CPU#03: BANK#3: BIST_SIG1=0x0000000000000000, BIST_SIG2=0x0000000000000000
  327. CPU#03:
  328. CPU#03: Enable coherence
  329. CPU#03: APIC_ID: 0x03
  330. CPU#03: Waking up BSP with APIC_ID=0x00
  331. CPU#00: Warning: interleaving between CPU's can be supported only in case of 2 or 4 node's (current number of CPU's: 1)
  332.  
  333. Менеджер памяти инициализирован. Доступно 8388608 байт @ 47D000
  334.  
  335. DSP program memory test:
  336. NODE#00: skipped
  337. DSP data memory test:
  338. NODE#00 DSP memtest skipped
  339. init_pci_hardware(): FILE=main.c, LINE=474
  340. CPU#00:
  341. !!! TTY2 output started, PREVIOS OUTPUT on TTY1 ONLY !!!
  342.  
  343. CPU#00: Starting IO init.
  344. CPU#00: Found IOHUB on node 0 IOLink 0:
  345.  
  346. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  347. < SCAN PCI BUS
  348. <
  349. < PCI Memory Base Reg = 0xB8008000 BGN = 0x80000000 END = 0xBFFFFFFF
  350. < PCI IO Base Reg = 0x90000000 BGN = 0x0 END = 0x9FFF
  351. < PCI Non-pref memory BGN = 0x80000000 END = 0x8FFFFFFF
  352. < PCI Pref memory BGN = 0x90000000 END = 0xBFFFFFFF
  353. < PCI IO BGN = 0x1000 END = 0x9FFF
  354. <
  355. < BUS[0] SLOT[1] [E3E38086] :
  356. < Ven = 8086, Dev = 0xE3E3, Rev = 0x1
  357. < Cmd = 7
  358. < Class code = 0x60400, Header type = 0x1
  359. < Bridge Device: PCI/PCI bridge
  360. < Parent IRQ = 0x0
  361. < Pin = 0, Line = 0x10
  362. < Сhaild IRQ = 0x0
  363. < Write Latency Timer <- 0x80 Latency Timer [0x800D] = 0x0
  364. < Reg[0x18] = 0x30200
  365. <
  366. <
  367. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  368. < Scan PCI Bus = 0x1 (Parent Bus = 0x0)
  369. <
  370. < IOHub Dev Num = 0x10
  371. < Set SCBA SCBA = 0x080000001
  372. < boot_data.node_info[pmc->core_num].sys_comm_pci_mem[pmc->link_num] = 0x80000000
  373. <
  374.  
  375. < BUS[1] SLOT[0] [80001FFF]: Master-Abort[0x0] STATUS[0x0]
  376. < Ven = 1FFF, Dev = 0x8000, Rev = 0x5
  377. < Cmd = 0
  378. < Class code = 0x60400, Header type = 0x1
  379. < Bridge Device: PCI/PCI bridge
  380. < Parent IRQ = 0x0
  381. < Pin = 1, Line = 0x10
  382. < Сhaild IRQ = 0x0
  383. < Write Latency Timer <- 0x80 Latency Timer [0x10000D] = 0x0
  384. < Reg[0x18] = 0x0
  385. <
  386. <
  387. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  388. < Scan PCI Bus = 0x2 (Parent Bus = 0x1)
  389. <
  390. Setup SC for PCI-to-PCI bridge ... done.
  391.  
  392. < BUS[2] SLOT[3] [718126F]: Master-Abort[0x0] STATUS[0x0]
  393. < Ven = 126F, Dev = 0x718, Rev = 0xA0
  394. < Cmd = 2300000
  395. < Class code = 0x30000, Header type = 0x0
  396. < Display controller: VGA compatible controller
  397. < Parent IRQ = 0x0
  398. < Pin = 1, Line = 0x13
  399. < VGA found. Bus = 0x2.
  400. < Reg[0]: Size = 0x1000000 Base = 0x81000000 Non-prefetch
  401. < Reg[1]: Size = 0x200000 Base = 0x82000000 Non-prefetch
  402. < Reg[0x30]: Size = 0x10000 Base = 0x90000000 Prefetchable
  403.  
  404. < BUS[2] SLOT[3] [718126F]: Master-Abort[0x0]
  405.  
  406. <---------------------------------------- (Bus # 0x2 done) --------------------------------------------
  407.  
  408.  
  409. < Old IO = 0x1000, Old Non-pref = 0x81000000, Old Pref = 0x90000000
  410. < New IO = 0x1000, New Non-pref = 0x83000000, New Pref = 0x91000000
  411. <
  412. < Write Reg[0x10001C] <- 0x10
  413. < Write Reg[0x100030] <- 0x0
  414. < Write Reg[0x100020] <- 0x82F08100
  415. < Write Reg[0x100024] <- 0x90F09000
  416. < Write Reg[0x100028] <- 0x0
  417. < Write Reg[0x10002C] <- 0x0
  418. < Write Reg[0x10003E] <- 0x0 Reg = 0x0
  419. Setup SC for PCI-to-PCI bridge ... done.
  420. < Host Bridge timeout on secondary bus disabled for all.
  421. < Host Bridge transaction reordering disabled for all.
  422. < Host Bridge 64b operation on sec bus on downstream transactions disabled for all.
  423. < Reg[0x100040] = 0xE000F01
  424. <
  425. < PCI Bridge configured
  426. <
  427. vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
  428.  
  429.  
  430. < BUS[1] SLOT[0] [80001FFF]: Master-Abort[0x0]
  431.  
  432. < BUS[1] SLOT[1] [4D458086]: Master-Abort[0x0] STATUS[0x0]
  433. < Ven = 8086, Dev = 0x4D45, Rev = 0x1
  434. < Cmd = 0
  435. < Class code = 0x20000, Header type = 0x0
  436. < Network controller: Ethernet controller
  437. < Parent IRQ = 0x0
  438. < Pin = 1, Line = 0x11
  439. < Reg[0]: Size = 0x20 Base = 0x83000000 Non-prefetch
  440.  
  441. < BUS[1] SLOT[1] [4D458086]: Master-Abort[0x0]
  442.  
  443. < BUS[1] SLOT[2] [4D498086]: Master-Abort[0x0] STATUS[0x0]
  444. < Ven = 8086, Dev = 0x4D49, Rev = 0x80
  445. < Cmd = 2800000
  446. < Class code = 0x1018A, Header type = 0x80
  447. < Mass storage controller: IDE controller
  448. < Parent IRQ = 0x0
  449. < Pin = 1, Line = 0x12
  450. < Reg[0]: Size = 0x8 Base = 0x1000 IO space
  451. < Reg[1]: Size = 0x4 Base = 0x1008 IO space
  452. < Reg[2]: Size = 0x8 Base = 0x1010 IO space
  453. < Reg[3]: Size = 0x4 Base = 0x1018 IO space
  454. < Reg[4]: Size = 0x10 Base = 0x1020 IO space
  455. <
  456. < Multifunction device
  457. <
  458. < FUNC[1] [2] :
  459. < Ven = 8086, Dev = 0x2, Rev = 0x5
  460. < Cmd = 0
  461. < Class code = 0x70200, Header type = 0x80
  462. < Simple communications controller: Sub Class 2
  463. < Parent IRQ = 0x0
  464. < Pin = 1, Line = 0x12
  465. < Reg[0]: Size = 0x40 Base = 0x91000000 Prefetchable
  466. < Reg[1]: Size = 0x40 Base = 0x83000040 Non-prefetch
  467. <
  468. < IOHub Revision = 0x5
  469. <
  470. < Reg[0x48]: Size = 0x100000 Base = 0x83100000 Non-prefetch
  471. < Reg[0x58]: Size = 0x40 Base = 0x83200000 Non-prefetch
  472. <
  473. < FUNC[2] [2] :
  474. < Ven = 8086, Dev = 0x8000, Rev = 0x0
  475. < Cmd = 2000003
  476. < Class code = 0x78000, Header type = 0x80
  477. < Simple communications controller: Other
  478. < Parent IRQ = 0x0
  479. < Pin = 0, Line = 0x11
  480. < Reg[0]: Size = 0x20 Base = 0x1040 IO spacedone.
  481. !!! TTY registers base address is remaped.
  482. < Reg[1]: Size = 0x10 Base = 0x83200040 Non-prefetch
  483. <
  484. < FUNC[3] [2] :
  485. < Ven = 1013, Dev = 0x6005, Rev = 0x1
  486. < Cmd = 2000000
  487. < Class code = 0x40100, Header type = 0x0
  488. < Multimedia device: Audio device
  489. < Parent IRQ = 0x0
  490. < Pin = 1, Line = 0x12
  491. < Reg[0]: Size = 0x1000 Base = 0x83201000 Non-prefetch
  492. Setup SC for AC97 ... done.
  493. < Reg[1]: Size = 0x1000 Base = 0x83202000 Non-prefetch
  494.  
  495. < BUS[1] SLOT[3] [47488086]: Master-Abort[0x0] STATUS[0x0]
  496. < Ven = 8086, Dev = 0x4748, Rev = 0x0
  497. < Cmd = 0
  498. < Class code = 0x10601, Header type = 0x0
  499. < Mass storage controller: SATA controller
  500. < Parent IRQ = 0x0
  501. < Pin = 1, Line = 0x13
  502. < Reg[5]: Size = 0x2000 Base = 0x83204000 Non-prefetch
  503.  
  504. < BUS[1] SLOT[3] [47488086]: Master-Abort[0x0]
  505.  
  506. < BUS[1] SLOT[4] [554F8086]: Master-Abort[0x0] STATUS[0x0]
  507. < Ven = 8086, Dev = 0x554F, Rev = 0x0
  508. < Cmd = 2000000
  509. < Class code = 0xC0310, Header type = 0x80
  510. < Serial bus controller: USB (Universal Serial Bus)
  511. < Parent IRQ = 0x0
  512. < Pin = 1, Line = 0x10
  513. < Reg[0]: Size = 0x1000 Base = 0x83206000 Non-prefetch
  514. <
  515. < Multifunction device
  516. <
  517. < FUNC[1] [4] :
  518. < Ven = 8086, Dev = 0x5545, Rev = 0x0
  519. < Cmd = 2000000
  520. < Class code = 0xC0320, Header type = 0x0
  521. < Serial bus controller: USB (Universal Serial Bus)
  522. < Parent IRQ = 0x0
  523. < Pin = 1, Line = 0x10
  524. < Reg[0]: Size = 0x100 Base = 0x83207000 Non-prefetch
  525.  
  526. <---------------------------------------- (Bus # 0x1 done) --------------------------------------------
  527.  
  528.  
  529. < Old IO = 0x1000, Old Non-pref = 0x80000000, Old Pref = 0x90000000
  530. < New IO = 0x2000, New Non-pref = 0x84000000, New Pref = 0x92000000
  531. <
  532. < Write Reg[0x801C] <- 0x1010
  533. < Write Reg[0x8030] <- 0x0
  534. < Write Reg[0x8020] <- 0x83F08000
  535. < Write Reg[0x8024] <- 0x91F09000
  536. < Write Reg[0x8028] <- 0x0
  537. < Write Reg[0x802C] <- 0x0
  538. < Write Reg[0x803E] <- 0x0 Reg = 0x0
  539. <
  540. < PCI Bridge configured
  541. <
  542. vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
  543.  
  544. <
  545. < BUS[0] SLOT[0] [ABCDE3E3] :
  546. < Ven = E3E3, Dev = 0xABCD, Rev = 0x1
  547. < Cmd = 100000
  548. < Class code = 0x60400, Header type = 0x1
  549. < Bridge Device: PCI/PCI bridge
  550. < Parent IRQ = 0x0
  551. < Pin = 1, Line = 0x10
  552. < Сhaild IRQ = 0x0
  553. < Reg[0]: Size = 0x01000 Base = 0x084000000 Non-pref 64 bit
  554. < Write Latency Timer <- 0x80 Latency Timer [0xD] = 0x0
  555. < Reg[0x18] = 0x0
  556. <
  557. <
  558. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  559. < Scan PCI Bus = 0x3 (Parent Bus = 0x0)
  560. <
  561. < Reset PCI-E ... done.
  562. <
  563. Setup SC for PCI-to-PCIe bridge ... done.
  564.  
  565. < BUS[3] SLOT[0] [67791002]: Master-Abort[0x1] STATUS[0x100000]
  566. < Ven = 1002, Dev = 0x6779, Rev = 0x0
  567. < Cmd = 100000
  568. < Class code = 0x30000, Header type = 0x80
  569. < Display controller: VGA compatible controller
  570. < Parent IRQ = 0x0
  571. < Pin = 1, Line = 0x10
  572. < VGA found. Bus = 0x3. ... set VGA bit.
  573. < Reg[0]: Size = 0x010000000 Base = 0x0A0000000 Prefetch 64 bit
  574. < Reg[2]: Size = 0x020000 Base = 0x085000000 Non-pref 64 bit
  575. < Reg[4]: Size = 0x100 Base = 0x2000 IO space
  576. < Reg[0x30]: Size = 0x20000 Base = 0xB0000000 Prefetchable
  577. <
  578. < Multifunction device
  579. <
  580. < FUNC[1] [0] :
  581. < Ven = 1002, Dev = 0xAA98, Rev = 0x0
  582. < Cmd = 100000
  583. < Class code = 0x40300, Header type = 0x80
  584. < Multimedia device: Sub Class 3
  585. < Parent IRQ = 0x0
  586. < Pin = 2, Line = 0x11
  587. < Reg[0]: Size = 0x04000 Base = 0x085020000 Non-pref 64 bit
  588.  
  589. <---------------------------------------- (Bus # 0x3 done) --------------------------------------------
  590.  
  591.  
  592. < Old IO = 0x2000, Old Non-pref = 0x85000000, Old Pref = 0x92000000
  593. < New IO = 0x3000, New Non-pref = 0x86000000, New Pref = 0xB1000000
  594. <
  595. < Write Reg[0x1C] <- 0x2020
  596. < Write Reg[0x30] <- 0x0
  597. < Write Reg[0x20] <- 0x85F08500
  598. < Write Reg[0x24] <- 0xB0F09200
  599. < Write Reg[0x28] <- 0x0
  600. < Write Reg[0x2C] <- 0x0
  601. < Write Reg[0x3E] <- 0x8 Reg = 0x0
  602. Setup SC for PCI-to-PCIe bridge ... done.
  603. <
  604. < PCI Bridge configured
  605. <
  606. vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
  607.  
  608. <
  609. < Min bus = 0x1 Max bus = 0x3
  610. vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
  611.  
  612.  
  613. Configure static PCI IRQs
  614. TTY ... done.
  615. IDE ... done.
  616. I2C ... done. (Fill boot parameters ... done.)
  617. AC97 ... done.
  618. ETH ... done.
  619. ADC ... not found.
  620.  
  621. Check revision ... 0x1
  622.  
  623. SATA ... done.
  624. OHCI ... done.
  625. EHCI ... done.
  626.  
  627.  
  628. ------------------------------------------------------
  629. Init System Commutator
  630.  
  631. Setup SC for PCI-to-PCI bridge ... done.
  632. Setup SC for TTY ... done.
  633. Setup SC for IDE ... done.
  634. Setup SC for I2C ... done.
  635. Init i2c spi ... done.
  636.  
  637. Setup SC for AC97 ... done.
  638. Setup SC for ETH ... done.
  639. !ADC not found.
  640. ------------------------------------------------------
  641. Check revision
  642.  
  643. Configure additional devices
  644. Setup SC for SATA ... done.
  645. Setup SC for OHCI ... done.
  646. Setup SC for EHCI ... done.
  647. ------------------------------------------------------
  648. Setup SC for PCI-to-PCIe bridge ... done.
  649. ------------------------------------------------------
  650. Init System Commutator. Chanel #1
  651. Setting the channel 1.
  652. Disabling the channel 1.
  653. SC : REG[0x80000F0E] = 0x58
  654. SC : REG[0x80000F0B] = 0x00
  655.  
  656. ------------------------------------------------------
  657.  
  658. * Looking for PCI MGA Controllers
  659. CPU#00:
  660.  
  661. Node#0 IOlink#0
  662.  
  663.  
  664. vga_pci_node_num = 1 <----> vga_pci_node_cnt = 2
  665.  
  666. Enable PCI Dev.
  667. Try to start videobios.
  668.  
  669. --------- VIDEO BIOS ------
  670.  
  671. rom reg = 0xB0000001
  672. VIDEO BIOS found at B0000000
  673. Radeon detected!
  674. SETUP INT
  675. pci_video_bios_init: dev->slot = 0x0, dev->func = 0x0, devfn = 0x300
  676.  
  677. Copy ROM Code ... DONE
  678. pci_video_bios_init: X86_AX = 0x300
  679.  
  680. PCI video bios DONE!
  681.  
  682. Loading VGA font...
  683. SEQ_PLANE_WRITE 0
  684. SEQ_MEMORY_MODE 2
  685. GDC_MODE 0
  686. SEQ_CHARACTER_MAP 0
  687. done
  688.  
  689. Configuring screen structure. screen = 0x0, dev = 0x0
  690.  
  691. VGA TEST vga_framebuffer = 0xB8000
  692.  
  693. CPU#00: get boot params
  694. CPU#00: Starting Console init:
  695. Found screen # 0x0, model = 0x3
  696. mode = 0x2
  697. dev = 0x0, num = 0x0
  698. venid = 0x8086, devid = 0x8086
  699. maxX = 0x50, maxY = 0x18
  700. depth = 0x8
  701. putchar = 0xEBE18
  702. CPU#00: VGA console: screen [0] - Ready
  703. CPU#00: Console init finished.
  704.  
  705. ************************************************************
  706. * USB
  707. *
  708. *
  709. * OHCI found: BUS[1] SLOT[4] FUNC[0]
  710. * OHCI number: 0
  711. * OHCI revision: 1.0
  712. * <<<< ROOT HUB >>>>
  713. * Maximum Port Number: 2
  714. * Device is connected: Port 1
  715. * Full-Speed Device
  716. * Device added
  717. * Device is connected: Port 2
  718. * Full-Speed Device
  719. * Device added
  720. *
  721. * <<<< HUBS >>>>
  722. *
  723. * Hub Found
  724. * Location: OHCI0 Port1
  725. * Configuration1 Interface0 Alternate Setting0
  726. * Maximum Port Number: 4
  727. *
  728. * Hub Found
  729. * Location: OHCI0 Port2
  730. * Configuration1 Interface0 Alternate Setting0
  731. * Maximum Port Number: 4
  732. ************************************************************
  733.  
  734.  
  735. ************************************************************
  736. * KEYBOARDS
  737. ************************************************************
  738.  
  739. CPU#00: Starting Unified input init:
  740. CPU#00: TTY1 - Ready
  741. CPU#00: TTY2 - Ready
  742. CPU#00: USB_KB - Ready
  743. CPU#00: Unified input init finished.
  744. CPU#00: Delay of 2 sec was enabled, before drives initialisation starts...
  745.  
  746. Continue in 2 sec
  747. Continue in 1 sec
  748. Delay completed
  749. CPU#00: Starting drives controllers init:
  750. CPU#00: Looking Node#0 IOlink#0 IO-hub:
  751. CPU#00: Found: MCST IDE
  752. CPU#00: Init MCST IDE controller: Native mode
  753. CPU#00: Drive [0]: Nothing
  754. CPU#00: Drive [1]: Nothing
  755. CPU#00: Drive [2]: ULTIMATE CF CARD, 0x0 0x1DC7FC0 sectors, DMA: Ultra 2
  756. CPU#00: Drive [3]: Nothing
  757. CPU#00: Found: MCST SATA
  758. CPU#00: Init MCST SATA controller:
  759. CPU#00: set_bios_settings: total_ports_implemented=4
  760.  
  761. CPU#00: set_bios_settings: total_ports_implemented_mask=0xF
  762.  
  763. CPU#00: set_bios_settings: SATA PI reg = 0xF
  764. CPU#00: Init generic AHCI interface: version 1.30, 4 ports, 32 cmd slots
  765. CPU#00: Drive [4]: KINGSTON SMS200S3120G, 0x0 0xDF94BB0 sectors, DMA: Ultra 6
  766. CPU#00: Drive [5]: WDC WD1003FZEX-00MK2A0, 0x0 0x74706DB0 sectors, DMA: Ultra 6
  767. CPU#00: Drive [6]: ATAPI iHAS124 F ,
  768. CPU#00: checkSstsDet: device is not attached: SSTS.DET=0x0
  769.  
  770. CPU#00: Drive [7]: Nothing
  771. CPU#00: Drives controllers init finished
  772.  
  773. ************************************************************
  774. * USB MASS STORAGE DEVICES
  775. ************************************************************
  776.  
  777.  
  778. ************************************************************
  779. * ETHERNET
  780. * Looking for Ethernet Controllers
  781. *
  782. * Ethernet Controller found: BUS[1] SLOT[1] FUNC[0]
  783. * Ethernet Controller: MCST ETH1000 Gigabit Ethernet
  784. * Interface number: 0
  785. * Physical Layer: Marvell 88E1111 rev.2
  786. * Mode: Normal
  787. * Speed setting
  788. * AUTO: 1000Mbps, Full-Duplex
  789. * MAC address: 98:A7:B0:00:00:00
  790. ************************************************************
  791.  
  792.  
  793. ************************************************************
  794. * ATA over Ethernet
  795. * Using 5000 (0x1388) (ms) as aoe timeout break.
  796. * AoE::aoe_timeout_break=5000
  797. * Interface #0: link status 1001
  798. * Server RQs:
  799. * Using FF:FF:FF:FF:FF:FF as the destination MAC address.
  800. * Using 65535 (0xFFFF) as the destination major address.
  801. * Using 255 (0xFF) as the destination minor address.
  802. * Server RQ transmitted
  803. * Server RQ transmitted
  804. * Server RQ transmitted
  805. * Server RQ transmitted
  806. * Server RQ transmitted
  807. * Server RQ transmitted
  808. * Server RQ transmitted
  809. * Server RQ transmitted
  810. * Server RQ transmitted
  811. * Server RQ transmitted
  812. * No server found
  813. ************************************************************
  814.  
  815. CPU#00: Starting file systems init: Done
  816. CPU#00: Lintel HW init disabled!
  817. CPU#00: Drive [2]: IDE - PCI BUS[1]:DEV[2]:FUNC[0], MCST IDE Secondary Master - ULTIMATE CF CARD
  818. CPU#00: Partition [0]: W95 FAT32 (LBA)
  819. CPU#00: Drive [4]: SATA - PCI BUS[1]:DEV[3]:FUNC[0], MCST SATA Port [0] - KINGSTON SMS200S3120G
  820. CPU#00: Partition [0]: Linux EXT3
  821. CPU#00: Partition [1]: Linux swap
  822. CPU#00: Partition [2]: Linux EXT3
  823. CPU#00: Partition [3]: Extended
  824. CPU#00: Partition [4]: Linux EXT3
  825. CPU#00: Partition [5]: Linux EXT3
  826. CPU#00: Partition [6]: Linux EXT3
  827. CPU#00: Drive [5]: SATA - PCI BUS[1]:DEV[3]:FUNC[0], MCST SATA Port [1] - WDC WD1003FZEX-00MK2A0
  828. CPU#00: Unknown partition table
  829. CPU#00: Drive [6]: ATAPI device
  830. CPU#00:
  831. CPU#00: Searching auto install parameters.
  832. CPU#00: Auto label was not found at all
  833. CPU#00: Can not find auto install parameters.
  834. CPU#00: Trying to load boot configuration file from Drive [4]... Success
  835. CPU#00: Using boot parameters from Drive [4]
  836.  
  837. Autoboot in 03 sec. PRESS SPACE TO DISABLE IT.
  838. Autoboot in 02 sec. PRESS SPACE TO DISABLE IT.
  839. Autoboot in 01 sec. PRESS SPACE TO DISABLE IT.
  840. Starting autoboot.
  841. CPU#00: Searching '/boot.conf' for default label 'auto'
  842. CPU#00: Label 'auto' found, loading parameters
  843.  
  844. Trying to load and start image with following parameters:
  845. drive_number: '4'
  846. partition_number: '0'
  847. command_string: 'console=tty0 console=ttyS0,115200 consoleblank=0 hardreset REBOOT root=/dev/sda3 video=DVI-D-1:1024x768-24@60 video=VGA-1:1024x768-24@60 fbcon=map:10'
  848. filename: '/boot/image-033.6.57'
  849. initrdfilename: ''
  850.  
  851. CPU#00: Reading: File - '/boot/image-033.6.57', Drive - 4, Partition - 0, Buffer - 0xFF0000
  852.  
  853. Loaded: 0%
  854. Loaded: 13%
  855. Loaded: 27%
  856. Loaded: 40%
  857. Loaded: 54%
  858. Loaded: 68%
  859. Loaded: 81%
  860. Loaded: 95%
  861. Loaded: 100%
  862. CPU#00: Reading completed. File size: 30903056 bytes
  863. CPU#00: Ethernet Interfaces stopped
  864. CPU#00: USB stopped
  865. CPU#00: SPI frequency dropped to 12.5MHz
  866. Kernel ROM loader's initialization started.
  867.  
  868. bootblock_p: 0xFF0100; boot_info: 0xFF0100
  869. bootblock_p: 0xFF0100; boot_info2: 0xFF0100
  870. Wrong romloader signature. Must be E200 is 8086.
  871. CPU#00:
  872. === boot_OS_IF: boot_info ====
  873. CPU#00:
  874. bank 0: addr=00400000 size=0087D000
  875. Before create_smp_config
  876. Bootblock: 0xFF0100; boot_info: 0xFF0100
  877. boot_info->mp_table_base = 0x0663000
  878. smp_write_floating_table: mpf = 0x663000
  879. mpf->mpf_physptr = 663018
  880.  
  881. smp_write_floating_table: mpf = 0x663000
  882. smp_write_config_table: mc = 663018
  883.  
  884. smp_write_config_table: mc->mpc_length = 2C
  885.  
  886. smp_write_config_table: mc = 663018
  887.  
  888. smp_write_processors node=0: core=0: mc = 663018
  889.  
  890. smp_write_processor 0x663044
  891. smp_write_processors node=0: core=1: mc = 663018
  892.  
  893. smp_write_processor 0x663058
  894. smp_write_processors node=0: core=2: mc = 663018
  895.  
  896. smp_write_processor 0x66306C
  897. smp_write_processors node=0: core=3: mc = 663018
  898.  
  899. smp_write_processor 0x663080
  900. CPU#00: Found IOHUB on node 0 IOLink 0:
  901. get_iolinkver_by_revision = rev = 5
  902. smp_write_iolink 0x663094
  903. before write_arch_mpspec
  904.  
  905. smp_write_config_table: mc = 663018
  906.  
  907. timer addr = 0x83200000
  908. sizeof(mpc->mpc_timeraddr) = 0x8
  909. &(mpc->mpc_timeraddr) = 0x6630C4
  910. sizeof(timer_addr) = 0x8
  911. sizeof(*mpc) = 0x10
  912. write ioapic [0x0 0x0] = 0xFEC00000
  913. deb(fil_mpct_pci): busnode = 0x480AE0
  914. deb(fil_mpct_pci): bus = 0x1
  915. deb(fil_mpct_pci_rec): busnode = 0x481300
  916. deb(fil_mpct_pci_rec): busnode->node[0]->int_pin = 0x1
  917. deb(fil_mpct_pci_rec): busnode->node[0]->irq = 0x0
  918.  
  919. deb(fil_mpct_pci_rec): bus = 0x2
  920. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  921. deb(fil_mpct_pci_rec): busnode = 0x481B20
  922. deb(fil_mpct_pci_rec): busnode->node[0]->int_pin = 0x1
  923. deb(fil_mpct_pci_rec): busnode->node[0]->irq = 0x3
  924. VvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvV
  925.  
  926. deb(fil_mpct_pci_rec): busnode->node[1]->int_pin = 0x1
  927. deb(fil_mpct_pci_rec): busnode->node[1]->irq = 0x1
  928. deb(fil_mpct_pci_rec): busnode->node[2]->int_pin = 0x1
  929. deb(fil_mpct_pci_rec): busnode->node[2]->irq = 0x2
  930. deb(fil_mpct_pci_rec): busnode->node[6]->int_pin = 0x1
  931. deb(fil_mpct_pci_rec): busnode->node[6]->irq = 0x3
  932. deb(fil_mpct_pci_rec): busnode->node[7]->int_pin = 0x1
  933. deb(fil_mpct_pci_rec): busnode->node[7]->irq = 0x0
  934. deb(fil_mpct_pci): bus = 0x3
  935. deb(fil_mpct_pci_rec): busnode = 0x482340
  936. deb(fil_mpct_pci_rec): busnode->node[0]->int_pin = 0x1
  937. deb(fil_mpct_pci_rec): busnode->node[0]->irq = 0x0
  938. write bus-hrch
  939. deb(fil_mpct_pci_hrch): busnode = 0x480AE0
  940. deb(fil_mpct_pci_hrch): bus = 0x1
  941. deb(fil_mpct_pci_hrch): busnode = 0x481300
  942. deb(fil_mpct_pci_hrch): bus = 0x2
  943. deb(fil_mpct_pci_hrch): busnode = 0x481B20
  944. deb(fil_mpct_pci_hrch): bus = 0x3
  945. deb(fil_mpct_pci_hrch): busnode = 0x482340
  946. index = 0:0 : proc_id = 0x0, apic_ver = 0x14, apic_bsp = 0x9
  947. index = 0:1 : proc_id = 0x1, apic_ver = 0x14, apic_bsp = 0x8
  948. index = 0:2 : proc_id = 0x2, apic_ver = 0x14, apic_bsp = 0x8
  949. index = 0:3 : proc_id = 0x3, apic_ver = 0x14, apic_bsp = 0x8
  950.  
  951. TEST BOOTBLOCK
  952. bootblock : FF0100
  953. bootblock->x86_marker : AA55
  954. bootblock->recovery_flag : 0
  955. TEST BOOTINFO
  956. bootblock->info.signature : 8086
  957. bootblock->info.cylinders : 0
  958. bootblock->info.heads : 0
  959. bootblock->info.sectors : 0
  960. bootblock->info.vga_mode : E2
  961. bootblock->info.num_of_banks : 2
  962. bootblock->info.kernel_base : 1000000
  963. bootblock->info.kernel_size : 1D68B10
  964. bootblock->info.ramdisk_base : 0
  965. bootblock->info.ramdisk_size : 0
  966. bootblock->info.num_of_cpus : 4
  967. bootblock->info.num_of_busy : 1
  968. bootblock->info.mach_flags : 24
  969. bootblock->info.serial_base : 0.83200040
  970. bootblock->info.mp_table_base : 0.663000
  971. bootblock->info.kernel_args_string : [KERNEL_ARGS_STRING_EX]
  972. bootblock->info.bios.kernel_args_string_ex : [console=tty0 console=ttyS0,115200 consoleblank=0 hardreset REBOOT root=/dev/sda3 video=DVI-D-1:1024x768-24@60 video=VGA-1:1024x768-24@60 fbcon=map:10]
  973. bootblock->bootblock_ver : 1
  974. bootblock->info.num_of_nodes: 1
  975. bootblock->info.nodes_map : 0.1
  976. bootblock->info.mach_serialn: 0
  977. bootblock->info.mac_addr : 98:A7:B0:00:00:00
  978. TEST BOOT_TIMES
  979. arch = 417677018 clk: 14614 ms
  980. unpack = 417818715 clk: 14615 ms
  981. pci = 1355165727 clk: 17800 ms
  982. drivers1 = 124034718 clk: 21629 ms
  983. drivers2 = 2411150694 clk: 40594 ms
  984. menu = 2618653706 clk: 40854 ms
  985. sm = 2073371125 clk: 45541 ms
  986. kernel = 2140299160 clk: 45624 ms
  987.  
  988. node[0] mem bank[0].address : 0.0
  989. node[0] mem bank[0].size : 0.20000000
  990. node[0] mem bank[1].address : 10.20000000
  991. node[0] mem bank[1].size : 5.D417C000
  992. node[0] mem bank[2].address : 0.0
  993. node[0] mem bank[2].size : 0.0
  994. node[0] mem bank[3].address : 0.0
  995. node[0] mem bank[3].size : 0.0
  996. node[0] mem bank_ex[4].address : 0.0
  997. node[0] mem bank_ex[4].size : 0.0
  998. node[1] mem bank[0].address : 0.0
  999. node[1] mem bank[0].size : 0.0
  1000. node[1] mem bank[1].address : 0.0
  1001. node[1] mem bank[1].size : 0.0
  1002. node[1] mem bank[2].address : 0.0
  1003. node[1] mem bank[2].size : 0.0
  1004. node[1] mem bank[3].address : 0.0
  1005. node[1] mem bank[3].size : 0.0
  1006. node[1] mem bank_ex[4].address : 0.0
  1007. node[1] mem bank_ex[4].size : 0.0
  1008. node[2] mem bank[0].address : 0.0
  1009. node[2] mem bank[0].size : 0.0
  1010. node[2] mem bank[1].address : 0.0
  1011. node[2] mem bank[1].size : 0.0
  1012. node[2] mem bank[2].address : 0.0
  1013. node[2] mem bank[2].size : 0.0
  1014. node[2] mem bank[3].address : 0.0
  1015. node[2] mem bank[3].size : 0.0
  1016. node[2] mem bank_ex[4].address : 0.0
  1017. node[2] mem bank_ex[4].size : 0.0
  1018. node[3] mem bank[0].address : 0.0
  1019. node[3] mem bank[0].size : 0.0
  1020. node[3] mem bank[1].address : 0.0
  1021. node[3] mem bank[1].size : 0.0
  1022. node[3] mem bank[2].address : 0.0
  1023. node[3] mem bank[2].size : 0.0
  1024. node[3] mem bank[3].address : 0.0
  1025. node[3] mem bank[3].size : 0.0
  1026. node[3] mem bank_ex[4].address : 0.0
  1027. node[3] mem bank_ex[4].size : 0.0
  1028. node[4] mem bank[0].address : 0.0
  1029. node[4] mem bank[0].size : 0.0
  1030. node[4] mem bank[1].address : 0.0
  1031. node[4] mem bank[1].size : 0.0
  1032. node[4] mem bank[2].address : 0.0
  1033. node[4] mem bank[2].size : 0.0
  1034. node[4] mem bank[3].address : 0.0
  1035. node[4] mem bank[3].size : 0.0
  1036. node[4] mem bank_ex[4].address : 0.0
  1037. node[4] mem bank_ex[4].size : 0.0
  1038. node[5] mem bank[0].address : 0.0
  1039. node[5] mem bank[0].size : 0.0
  1040. node[5] mem bank[1].address : 0.0
  1041. node[5] mem bank[1].size : 0.0
  1042. node[5] mem bank[2].address : 0.0
  1043. node[5] mem bank[2].size : 0.0
  1044. node[5] mem bank[3].address : 0.0
  1045. node[5] mem bank[3].size : 0.0
  1046. node[5] mem bank_ex[4].address : 0.0
  1047. node[5] mem bank_ex[4].size : 0.0
  1048. node[6] mem bank[0].address : 0.0
  1049. node[6] mem bank[0].size : 0.0
  1050. node[6] mem bank[1].address : 0.0
  1051. node[6] mem bank[1].size : 0.0
  1052. node[6] mem bank[2].address : 0.0
  1053. node[6] mem bank[2].size : 0.0
  1054. node[6] mem bank[3].address : 0.0
  1055. node[6] mem bank[3].size : 0.0
  1056. node[6] mem bank_ex[4].address : 0.0
  1057. node[6] mem bank_ex[4].size : 0.0
  1058. node[7] mem bank[0].address : 0.0
  1059. node[7] mem bank[0].size : 0.0
  1060. node[7] mem bank[1].address : 0.0
  1061. node[7] mem bank[1].size : 0.0
  1062. node[7] mem bank[2].address : 0.0
  1063. node[7] mem bank[2].size : 0.0
  1064. node[7] mem bank[3].address : 0.0
  1065. node[7] mem bank[3].size : 0.0
  1066. node[7] mem bank_ex[4].address : 0.0
  1067. node[7] mem bank_ex[4].size : 0.0
  1068. busy bank[0].address : 0.400000
  1069. busy bank[0].size : 0.87D000
  1070. bootblock->info.bios.signature : E2KBIOS
  1071. bootblock->info.bios.boot_ver :
  1072. release-2.13.3.0-E2S ::::::: ( /tags/release-2.13.3.0-E2S at revision 3816 )
  1073. built on Nov 2 2015 at 18:05:58
  1074. bootblock->info.bios.mb_type : 23
  1075. bootblock->info.bios.chipset_type : 2
  1076. bootblock->info.bios.cpu_type : 3
  1077. bootblock->info.bios.cache_lines_damaged : 0
  1078. TEST MP_FPS_TABLE
  1079. FPS_SIGNATURE : 5F504D5F [must be 5f504d5f ]
  1080. FPS_ADDRESS : 663018
  1081. FPS_LENGTH : 1 * 16 bytes
  1082. FPS_VERSION : 4
  1083. FPS_CHECKSUM : F2
  1084. FPS_FEATURE1 : 0
  1085. FPS_FEATURE2 : 0
  1086. FPS_FEATURE3 : 0
  1087. FPS_FEATURE4 : 0
  1088. FPS_FEATURE5 : 0
  1089. FPS_ADDRESS : 663018
  1090.  
  1091. TEST MP_CONF_TABLE
  1092. CONF_SIGNATURE : 504D4350 [must be 504d4350 ]
  1093. CONF_BASE_TABLE_LENGTH : 274 bytes
  1094. CONF_VERSION : 4
  1095. CONF_CHECKSUM : 6F
  1096. CONF_OEMID : 49584E4C
  1097. CONF_PRODUCTID : 4730343420202058202020
  1098. CONF_OEMPTR : 0
  1099. CONF_OEMTBLSIZE : 0
  1100. CONF_ENTRYCOUNT : 3B
  1101. CONF_APIC_ADDR : FEE00000
  1102. CONF_EXTTBL_LENGTH : 18
  1103. CONF_EXTTBL_CHECKSUM : 5E
  1104. CONF_RESERVED : 0
  1105. !!! mptbl = 0x663044
  1106. PROCESSOR : 0
  1107. LOCAL APIC ID : 0
  1108. LOCAL APIC VER : 14
  1109. CPU FLAGS : 3
  1110. CPU SIGNATURE : F
  1111. Feature flags : 200
  1112. Reserved : 0
  1113. Reserved : 0
  1114. PROCESSOR : 0
  1115. LOCAL APIC ID : 1
  1116. LOCAL APIC VER : 14
  1117. CPU FLAGS : 1
  1118. CPU SIGNATURE : F
  1119. Feature flags : 200
  1120. Reserved : 0
  1121. Reserved : 0
  1122. PROCESSOR : 0
  1123. LOCAL APIC ID : 2
  1124. LOCAL APIC VER : 14
  1125. CPU FLAGS : 1
  1126. CPU SIGNATURE : F
  1127. Feature flags : 200
  1128. Reserved : 0
  1129. Reserved : 0
  1130. PROCESSOR : 0
  1131. LOCAL APIC ID : 3
  1132. LOCAL APIC VER : 14
  1133. CPU FLAGS : 1
  1134. CPU SIGNATURE : F
  1135. Feature flags : 200
  1136. Reserved : 0
  1137. Reserved : 0
  1138. IOLINK : 7
  1139. IOLINK TYPE : 1
  1140. IOLINK VER : 15
  1141. Node : 0
  1142. Link : 0
  1143. Bus min : 1
  1144. Bus max : 3
  1145. APIC id : 10
  1146. Timer : 5
  1147. Timer type : 1
  1148. Timer ver : 1
  1149. Timer flags : 0
  1150. Timer addr : 83200000
  1151. Timer addr : 0
  1152. I2C addr : 6
  1153. I2C addr max chanel : 1
  1154. I2C irq : 17
  1155. I2C revision : 5
  1156. I2C 0 addr : 91000000
  1157. I2C 0 addr : 0
  1158. I2C 1 addr : 83000040
  1159. I2C 1 addr : 0
  1160. BUS : 1
  1161. BUS ID : 0
  1162. BUS TYPE : 435020492020
  1163. BUS : 1
  1164. BUS ID : 20
  1165. BUS TYPE : 534920412020
  1166. I/O APIC : 2
  1167. I/O APIC ID : 10
  1168. I/O APIC VER : 11
  1169. I/O APIC FLAGS : 1
  1170. I/O APIC ADDR : FEC00000
  1171. I/O APIC ADDR : 0
  1172. I/O Interrupt : 3
  1173. I/O Interrupt type : 3
  1174. I/O Interrupt flags : 5
  1175. Source bus id : 20
  1176. Source bus irq : 0
  1177. Dest i/o apic id : 10
  1178. Dest i/o apic intin# : 0
  1179. I/O Interrupt : 3
  1180. I/O Interrupt type : 0
  1181. I/O Interrupt flags : 5
  1182. Source bus id : 20
  1183. Source bus irq : 0
  1184. Dest i/o apic id : 10
  1185. Dest i/o apic intin# : 2
  1186. I/O Interrupt : 3
  1187. I/O Interrupt type : 4
  1188. I/O Interrupt flags : D
  1189. Source bus id : 1
  1190. Source bus irq : 8
  1191. Dest i/o apic id : 10
  1192. Dest i/o apic intin# : A
  1193. I/O Interrupt : 3
  1194. I/O Interrupt type : 4
  1195. I/O Interrupt flags : D
  1196. Source bus id : 1
  1197. Source bus irq : 10
  1198. Dest i/o apic id : 10
  1199. Dest i/o apic intin# : B
  1200. I/O Interrupt : 3
  1201. I/O Interrupt type : 4
  1202. I/O Interrupt flags : D
  1203. Source bus id : 1
  1204. Source bus irq : 10
  1205. Dest i/o apic id : 10
  1206. Dest i/o apic intin# : D
  1207. I/O Interrupt : 3
  1208. I/O Interrupt type : 4
  1209. I/O Interrupt flags : D
  1210. Source bus id : 1
  1211. Source bus irq : 10
  1212. Dest i/o apic id : 10
  1213. Dest i/o apic intin# : E
  1214. I/O Interrupt : 3
  1215. I/O Interrupt type : 4
  1216. I/O Interrupt flags : D
  1217. Source bus id : 1
  1218. Source bus irq : 10
  1219. Dest i/o apic id : 10
  1220. Dest i/o apic intin# : F
  1221. I/O Interrupt : 3
  1222. I/O Interrupt type : 4
  1223. I/O Interrupt flags : D
  1224. Source bus id : 1
  1225. Source bus irq : 11
  1226. Dest i/o apic id : 10
  1227. Dest i/o apic intin# : 8
  1228. I/O Interrupt : 3
  1229. I/O Interrupt type : 4
  1230. I/O Interrupt flags : D
  1231. Source bus id : 1
  1232. Source bus irq : 11
  1233. Dest i/o apic id : 10
  1234. Dest i/o apic intin# : 17
  1235. I/O Interrupt : 3
  1236. I/O Interrupt type : 4
  1237. I/O Interrupt flags : D
  1238. Source bus id : 1
  1239. Source bus irq : 12
  1240. Dest i/o apic id : 10
  1241. Dest i/o apic intin# : 3
  1242. I/O Interrupt : 3
  1243. I/O Interrupt type : 4
  1244. I/O Interrupt flags : D
  1245. Source bus id : 1
  1246. Source bus irq : 12
  1247. Dest i/o apic id : 10
  1248. Dest i/o apic intin# : 4
  1249. I/O Interrupt : 3
  1250. I/O Interrupt type : 4
  1251. I/O Interrupt flags : D
  1252. Source bus id : 1
  1253. Source bus irq : 12
  1254. Dest i/o apic id : 10
  1255. Dest i/o apic intin# : 7
  1256. I/O Interrupt : 3
  1257. I/O Interrupt type : 4
  1258. I/O Interrupt flags : D
  1259. Source bus id : 1
  1260. Source bus irq : 13
  1261. Dest i/o apic id : 10
  1262. Dest i/o apic intin# : 5
  1263. I/O Interrupt : 3
  1264. I/O Interrupt type : 4
  1265. I/O Interrupt flags : D
  1266. Source bus id : 1
  1267. Source bus irq : 13
  1268. Dest i/o apic id : 10
  1269. Dest i/o apic intin# : 8
  1270. I/O Interrupt : 3
  1271. I/O Interrupt type : 4
  1272. I/O Interrupt flags : D
  1273. Source bus id : 1
  1274. Source bus irq : 13
  1275. Dest i/o apic id : 10
  1276. Dest i/o apic intin# : 9
  1277. I/O Interrupt : 3
  1278. I/O Interrupt type : 4
  1279. I/O Interrupt flags : D
  1280. Source bus id : 1
  1281. Source bus irq : 18
  1282. Dest i/o apic id : 10
  1283. Dest i/o apic intin# : 15
  1284. I/O Interrupt : 3
  1285. I/O Interrupt type : 4
  1286. I/O Interrupt flags : D
  1287. Source bus id : 1
  1288. Source bus irq : 20
  1289. Dest i/o apic id : 10
  1290. Dest i/o apic intin# : 14
  1291. I/O Interrupt : 3
  1292. I/O Interrupt type : 4
  1293. I/O Interrupt flags : D
  1294. Source bus id : 1
  1295. Source bus irq : 21
  1296. Dest i/o apic id : 10
  1297. Dest i/o apic intin# : 14
  1298. BUS : 1
  1299. BUS ID : 1
  1300. BUS TYPE : 435020492020
  1301. I/O Interrupt : 3
  1302. I/O Interrupt type : 0
  1303. I/O Interrupt flags : F
  1304. Source bus id : 1
  1305. Source bus irq : 0
  1306. Dest i/o apic id : 10
  1307. Dest i/o apic intin# : 10
  1308. I/O Interrupt : 3
  1309. I/O Interrupt type : 0
  1310. I/O Interrupt flags : F
  1311. Source bus id : 1
  1312. Source bus irq : 1
  1313. Dest i/o apic id : 10
  1314. Dest i/o apic intin# : 11
  1315. I/O Interrupt : 3
  1316. I/O Interrupt type : 0
  1317. I/O Interrupt flags : F
  1318. Source bus id : 1
  1319. Source bus irq : 2
  1320. Dest i/o apic id : 10
  1321. Dest i/o apic intin# : 12
  1322. I/O Interrupt : 3
  1323. I/O Interrupt type : 0
  1324. I/O Interrupt flags : F
  1325. Source bus id : 1
  1326. Source bus irq : 3
  1327. Dest i/o apic id : 10
  1328. Dest i/o apic intin# : 13
  1329. BUS : 1
  1330. BUS ID : 2
  1331. BUS TYPE : 435020492020
  1332. I/O Interrupt : 3
  1333. I/O Interrupt type : 0
  1334. I/O Interrupt flags : F
  1335. Source bus id : 2
  1336. Source bus irq : C
  1337. Dest i/o apic id : 10
  1338. Dest i/o apic intin# : 13
  1339. I/O Interrupt : 3
  1340. I/O Interrupt type : 0
  1341. I/O Interrupt flags : F
  1342. Source bus id : 2
  1343. Source bus irq : D
  1344. Dest i/o apic id : 10
  1345. Dest i/o apic intin# : 10
  1346. I/O Interrupt : 3
  1347. I/O Interrupt type : 0
  1348. I/O Interrupt flags : F
  1349. Source bus id : 2
  1350. Source bus irq : E
  1351. Dest i/o apic id : 10
  1352. Dest i/o apic intin# : 11
  1353. I/O Interrupt : 3
  1354. I/O Interrupt type : 0
  1355. I/O Interrupt flags : F
  1356. Source bus id : 2
  1357. Source bus irq : F
  1358. Dest i/o apic id : 10
  1359. Dest i/o apic intin# : 12
  1360. I/O Interrupt : 3
  1361. I/O Interrupt type : 0
  1362. I/O Interrupt flags : F
  1363. Source bus id : 1
  1364. Source bus irq : 4
  1365. Dest i/o apic id : 10
  1366. Dest i/o apic intin# : 11
  1367. I/O Interrupt : 3
  1368. I/O Interrupt type : 0
  1369. I/O Interrupt flags : F
  1370. Source bus id : 1
  1371. Source bus irq : 5
  1372. Dest i/o apic id : 10
  1373. Dest i/o apic intin# : 12
  1374. I/O Interrupt : 3
  1375. I/O Interrupt type : 0
  1376. I/O Interrupt flags : F
  1377. Source bus id : 1
  1378. Source bus irq : 6
  1379. Dest i/o apic id : 10
  1380. Dest i/o apic intin# : 13
  1381. I/O Interrupt : 3
  1382. I/O Interrupt type : 0
  1383. I/O Interrupt flags : F
  1384. Source bus id : 1
  1385. Source bus irq : 7
  1386. Dest i/o apic id : 10
  1387. Dest i/o apic intin# : 10
  1388. I/O Interrupt : 3
  1389. I/O Interrupt type : 0
  1390. I/O Interrupt flags : F
  1391. Source bus id : 1
  1392. Source bus irq : 8
  1393. Dest i/o apic id : 10
  1394. Dest i/o apic intin# : 12
  1395. I/O Interrupt : 3
  1396. I/O Interrupt type : 0
  1397. I/O Interrupt flags : F
  1398. Source bus id : 1
  1399. Source bus irq : 9
  1400. Dest i/o apic id : 10
  1401. Dest i/o apic intin# : 13
  1402. I/O Interrupt : 3
  1403. I/O Interrupt type : 0
  1404. I/O Interrupt flags : F
  1405. Source bus id : 1
  1406. Source bus irq : A
  1407. Dest i/o apic id : 10
  1408. Dest i/o apic intin# : 10
  1409. I/O Interrupt : 3
  1410. I/O Interrupt type : 0
  1411. I/O Interrupt flags : F
  1412. Source bus id : 1
  1413. Source bus irq : B
  1414. Dest i/o apic id : 10
  1415. Dest i/o apic intin# : 11
  1416. I/O Interrupt : 3
  1417. I/O Interrupt type : 0
  1418. I/O Interrupt flags : F
  1419. Source bus id : 1
  1420. Source bus irq : C
  1421. Dest i/o apic id : 10
  1422. Dest i/o apic intin# : 13
  1423. I/O Interrupt : 3
  1424. I/O Interrupt type : 0
  1425. I/O Interrupt flags : F
  1426. Source bus id : 1
  1427. Source bus irq : D
  1428. Dest i/o apic id : 10
  1429. Dest i/o apic intin# : 10
  1430. I/O Interrupt : 3
  1431. I/O Interrupt type : 0
  1432. I/O Interrupt flags : F
  1433. Source bus id : 1
  1434. Source bus irq : E
  1435. Dest i/o apic id : 10
  1436. Dest i/o apic intin# : 11
  1437. I/O Interrupt : 3
  1438. I/O Interrupt type : 0
  1439. I/O Interrupt flags : F
  1440. Source bus id : 1
  1441. Source bus irq : F
  1442. Dest i/o apic id : 10
  1443. Dest i/o apic intin# : 12
  1444. I/O Interrupt : 3
  1445. I/O Interrupt type : 0
  1446. I/O Interrupt flags : F
  1447. Source bus id : 1
  1448. Source bus irq : 10
  1449. Dest i/o apic id : 10
  1450. Dest i/o apic intin# : 10
  1451. I/O Interrupt : 3
  1452. I/O Interrupt type : 0
  1453. I/O Interrupt flags : F
  1454. Source bus id : 1
  1455. Source bus irq : 11
  1456. Dest i/o apic id : 10
  1457. Dest i/o apic intin# : 11
  1458. I/O Interrupt : 3
  1459. I/O Interrupt type : 0
  1460. I/O Interrupt flags : F
  1461. Source bus id : 1
  1462. Source bus irq : 12
  1463. Dest i/o apic id : 10
  1464. Dest i/o apic intin# : 12
  1465. I/O Interrupt : 3
  1466. I/O Interrupt type : 0
  1467. I/O Interrupt flags : F
  1468. Source bus id : 1
  1469. Source bus irq : 13
  1470. Dest i/o apic id : 10
  1471. Dest i/o apic intin# : 13
  1472. BUS : 1
  1473. BUS ID : 3
  1474. BUS TYPE : 435020492020
  1475. I/O Interrupt : 3
  1476. I/O Interrupt type : 0
  1477. I/O Interrupt flags : F
  1478. Source bus id : 3
  1479. Source bus irq : 0
  1480. Dest i/o apic id : 10
  1481. Dest i/o apic intin# : 10
  1482. I/O Interrupt : 3
  1483. I/O Interrupt type : 0
  1484. I/O Interrupt flags : F
  1485. Source bus id : 3
  1486. Source bus irq : 1
  1487. Dest i/o apic id : 10
  1488. Dest i/o apic intin# : 11
  1489. I/O Interrupt : 3
  1490. I/O Interrupt type : 0
  1491. I/O Interrupt flags : F
  1492. Source bus id : 3
  1493. Source bus irq : 2
  1494. Dest i/o apic id : 10
  1495. Dest i/o apic intin# : 12
  1496. I/O Interrupt : 3
  1497. I/O Interrupt type : 0
  1498. I/O Interrupt flags : F
  1499. Source bus id : 3
  1500. Source bus irq : 3
  1501. Dest i/o apic id : 10
  1502. Dest i/o apic intin# : 13
  1503. EXTENDED ENTRY : 81 size = 0x8
  1504. EXTENDED ENTRY : 81 size = 0x8
  1505. EXTENDED ENTRY : 81 size = 0x8
  1506.  
  1507. !!! FINISH TEST BOOTBLOCK !!!
  1508.  
  1509. Start all processors!!!
  1510. smp starter
  1511. CPU#00: CUD.hi 0000000001D68B10
  1512. CPU#00: CUD.lo 0C00000001000000
  1513. CPU#00: OSCUD.hi 0000000001D68B10
  1514. CPU#00: OSCUD.lo 0C00000001000000
  1515. CPU#00: GD.hi 0000000001D68B10
  1516. CPU#00: GD.lo 1800000001000000
  1517. CPU#00: OSGD.hi 0000000001D68B10
  1518. CPU#00: OSGD.lo 1800000001000000
  1519. CPU#00: input_reg0 0000000001000000
  1520. CPU#00: input_reg1 0000000001D68B10
  1521. CPU#00: input_reg2 0000000000FF0100
  1522. CPU#00: output_reg0 0000000000000000
  1523. CPU#00: output_reg1 0000000000FF0100
  1524.  
  1525. Linux version 2.6.33-elbrus.033.6.57 (gavrilova_tg@e2k13) (gcc version 4.4.0 compatible.) #1 SMP Sun Oct 11 00:10:58 MSK 2015
  1526. MSI supported
  1527. bootconsole [early_dump0] enabled
  1528. ARCH: E2K MACHINE TYPE: e2s IOHUB , ID 00e3, REVISION: 001 SERIAL # UNKNOWN
  1529. Kernel image check sum: 1269370122
  1530. DMA zone: 231168 pages exceeds realsize 131072
  1531. ACPI Error: A valid RSDP was not found (20091214/tbxfroot-219)
  1532. found SMP MP-table at 0x0000d00000663000
  1533. MultiProcessor Specification v1.4
  1534. Virtual Wire compatibility mode.
  1535. OEM ID: LNXI Product ID: 440GX APIC at: 0xFEE00000
  1536. Processor APIC ID #0 version 20
  1537. Processor APIC ID #1 version 20
  1538. Processor APIC ID #2 version 20
  1539. Processor APIC ID #3 version 20
  1540. IO link #0 on node 0, version 0x15, connected to IOHUB: min bus #1 max bus #3 IO APIC ID 16
  1541. System timer type 1 Version 1 at 0x83200000.
  1542. i2c_spi_info: control base addr = 0000000091000000, data base addr = 0000000083000040, IRQ 23 IOHUB revision 05
  1543. I/O APIC #16 Version 17 at 0xFEC00000.
  1544. Processors: 4
  1545. Setting jiffies clock source multiplier to -1734967296
  1546. PERCPU: Embedded 12 pages/cpu @0000d01034e0c000 s18720 r8192 d22240 u65536
  1547. pcpu-alloc: s18720 r8192 d22240 u65536 alloc=16*4096
  1548. pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  1549. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 6159126
  1550. Policy zone: Normal
  1551. Kernel command line: console=tty0 console=ttyS0,115200 consoleblank=0 hardreset REBOOT root=/dev/sda3 video=DVI-D-1:1024x768-24@60 video=VGA-1:1024x768-24@60 fbcon=map:10
  1552. PID hash table entries: 4096 (order: 3, 32768 bytes)
  1553. No need to allocate secondary space: machine is E3S, UPT is on.
  1554. Memory: 24581828k available 388908k reserved (28676k kernel code, 1440k data, 1436k init) [0000d00000000000,00000015f417c000]
  1555. Memory total mapped pages number 0x15f417c : valid 0x5f417c, invalid 0x1000000
  1556. Node 0 DMA per-cpu:
  1557. CPU 0: hi: 0, btch: 1 usd: 0
  1558. Node 0 Normal per-cpu:
  1559. CPU 0: hi: 0, btch: 1 usd: 0
  1560. active_anon:0 inactive_anon:0 isolated_anon:0
  1561. active_file:0 inactive_file:0 isolated_file:0
  1562. unevictable:0 dirty:0 writeback:0 unstable:0
  1563. free:6145457 slab_reclaimable:0 slab_unreclaimable:0
  1564. mapped:0 shmem:0 pagetables:0 bounce:0
  1565. Node 0 DMA free:477672kB min:0kB low:0kB high:0kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:524288kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
  1566. lowmem_reserve[]: 0 0 0
  1567. Node 0 Normal free:24104156kB min:0kB low:0kB high:0kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:24112216kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
  1568. lowmem_reserve[]: 0 0 0
  1569. Node 0 DMA: 2*4kB 4*8kB 2*16kB 3*32kB 3*64kB 3*128kB 1*256kB 3*512kB 4*1024kB 0*2048kB 1*4096kB 1*8192kB 0*16384kB 14*32768kB = 477672kB
  1570. Node 0 Normal: 1*4kB 1*8kB 3*16kB 1*32kB 2*64kB 2*128kB 1*256kB 1*512kB 2*1024kB 0*2048kB 0*4096kB 0*8192kB 1*16384kB 735*32768kB = 24104156kB
  1571. 0 total pagecache pages
  1572. 0 pages in swap cache
  1573. Swap cache stats: add 0, delete 0, find 0/0
  1574. Free swap = 0kB
  1575. Total swap = 0kB
  1576. Hierarchical RCU implementation.
  1577. NR_IRQS:1024 nr_irqs:666
  1578. Setting APIC routing to physical flat
  1579. RDMA lvt2 enabled on NODE#0 CPU#0.
  1580. Console: colour dummy device 80x25
  1581.  
  1582. Linux version 2.6.33-elbrus.033.6.57 (gavrilova_tg@e2k13) (gcc version 4.4.0 compatible.) #1 SMP Sun Oct 11 00:10:58 MSK 2015
  1583. MSI supported
  1584. bootconsole [early_dump0] enabled
  1585. ARCH: E2K MACHINE TYPE: e2s IOHUB , ID 00e3, REVISION: 001 SERIAL # UNKNOWN
  1586. Kernel image check sum: 1269370122
  1587. DMA zone: 231168 pages exceeds realsize 131072
  1588. ACPI Error: A valid RSDP was not found (20091214/tbxfroot-219)
  1589. found SMP MP-table at 0x0000d00000663000
  1590. MultiProcessor Specification v1.4
  1591. Virtual Wire compatibility mode.
  1592. OEM ID: LNXI Product ID: 440GX APIC at: 0xFEE00000
  1593. Processor APIC ID #0 version 20
  1594. Processor APIC ID #1 version 20
  1595. Processor APIC ID #2 version 20
  1596. Processor APIC ID #3 version 20
  1597. IO link #0 on node 0, version 0x15, connected to IOHUB: min bus #1 max bus #3 IO APIC ID 16
  1598. System timer type 1 Version 1 at 0x83200000.
  1599. i2c_spi_info: control base addr = 0000000091000000, data base addr = 0000000083000040, IRQ 23 IOHUB revision 05
  1600. I/O APIC #16 Version 17 at 0xFEC00000.
  1601. Processors: 4
  1602. Setting jiffies clock source multiplier to -1734967296
  1603. PERCPU: Embedded 12 pages/cpu @0000d01034e0c000 s18720 r8192 d22240 u65536
  1604. pcpu-alloc: s18720 r8192 d22240 u65536 alloc=16*4096
  1605. pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  1606. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 6159126
  1607. Policy zone: Normal
  1608. Kernel command line: console=tty0 console=ttyS0,115200 consoleblank=0 hardreset REBOOT root=/dev/sda3 video=DVI-D-1:1024x768-24@60 video=VGA-1:1024x768-24@60 fbcon=map:10
  1609. PID hash table entries: 4096 (order: 3, 32768 bytes)
  1610. No need to allocate secondary space: machine is E3S, UPT is on.
  1611. Memory: 24581828k available 388908k reserved (28676k kernel code, 1440k data, 1436k init) [0000d00000000000,00000015f417c000]
  1612. Memory total mapped pages number 0x15f417c : valid 0x5f417c, invalid 0x1000000
  1613. Node 0 DMA per-cpu:
  1614. CPU 0: hi: 0, btch: 1 usd: 0
  1615. Node 0 Normal per-cpu:
  1616. CPU 0: hi: 0, btch: 1 usd: 0
  1617. active_anon:0 inactive_anon:0 isolated_anon:0
  1618. active_file:0 inactive_file:0 isolated_file:0
  1619. unevictable:0 dirty:0 writeback:0 unstable:0
  1620. free:6145457 slab_reclaimable:0 slab_unreclaimable:0
  1621. mapped:0 shmem:0 pagetables:0 bounce:0
  1622. Node 0 DMA free:477672kB min:0kB low:0kB high:0kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:524288kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
  1623. lowmem_reserve[]: 0 0 0
  1624. Node 0 Normal free:24104156kB min:0kB low:0kB high:0kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:24112216kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
  1625. lowmem_reserve[]: 0 0 0
  1626. Node 0 DMA: 2*4kB 4*8kB 2*16kB 3*32kB 3*64kB 3*128kB 1*256kB 3*512kB 4*1024kB 0*2048kB 1*4096kB 1*8192kB 0*16384kB 14*32768kB = 477672kB
  1627. Node 0 Normal: 1*4kB 1*8kB 3*16kB 1*32kB 2*64kB 2*128kB 1*256kB 1*512kB 2*1024kB 0*2048kB 0*4096kB 0*8192kB 1*16384kB 735*32768kB = 24104156kB
  1628. 0 total pagecache pages
  1629. 0 pages in swap cache
  1630. Swap cache stats: add 0, delete 0, find 0/0
  1631. Free swap = 0kB
  1632. Total swap = 0kB
  1633. Hierarchical RCU implementation.
  1634. NR_IRQS:1024 nr_irqs:666
  1635. Setting APIC routing to physical flat
  1636. RDMA lvt2 enabled on NODE#0 CPU#0.
  1637. Console: colour dummy device 80x25
  1638.  
  1639. console [tty0] enabled
  1640. Serial 8250/16550: console probe ... is not detected
  1641. Zilog: console probe ...Zilog: console init port 0, control_reg = 0xe40000004040
  1642. Zilog: console init port 1, control_reg = 0xe40000004042
  1643. found console [ttyS0] enabled, bootconsole disabled
  1644. console [ttyS0] enabled, bootconsole disabled
  1645.  
  1646. Node #0 IO LINK #0 is IO HUB controller ON connected to IO HUB controller
  1647. Calibrating delay using timer specific routine.. 1600.82 BogoMIPS (lpj=8004101)
  1648. Security Framework initialized
  1649. Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
  1650. Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
  1651. Mount-cache hash table entries: 256
  1652. CPU0: APIC ID 0
  1653. cpu_data[0]:
  1654. proc_freq 800000685
  1655. loops_per_jiffy == 8004101
  1656. MACHINE TYPE: e2s IOHUB , ID 00e3, REVISION: 001
  1657. copy_thread(): idle clone : return
  1658. Secondary virtual space translations is enabled on CPU #1
  1659. e2k_do_start_secondary, before setup_local_APIC().
  1660. RDMA lvt2 masked on NODE#0 CPU#1.
  1661. cpu_data[1]:
  1662. proc_freq 800000685
  1663. loops_per_jiffy == 8004101
  1664. copy_thread(): idle clone : return
  1665. Secondary virtual space translations is enabled on CPU #2
  1666. e2k_do_start_secondary, before setup_local_APIC().
  1667. RDMA lvt2 masked on NODE#0 CPU#2.
  1668. cpu_data[2]:
  1669. proc_freq 800000685
  1670. loops_per_jiffy == 8004101
  1671. copy_thread(): idle clone : return
  1672. Secondary virtual space translations is enabled on CPU #3
  1673. e2k_do_start_secondary, before setup_local_APIC().
  1674. RDMA lvt2 masked on NODE#0 CPU#3.
  1675. cpu_data[3]:
  1676. proc_freq 800000685
  1677. loops_per_jiffy == 11261138
  1678. Brought up 4 CPUs
  1679. Total of 4 processors activated (8029.69 BogoMIPS).
  1680. NET: Registered protocol family 16
  1681. IOMMU:0:0: enabled; window size 4096 MiB
  1682. External signal is used for SCLKR.
  1683. PCI: Using Elbrus configuration type
  1684. bio: create slab <bio-0> at 0
  1685. ACPI: Interpreter disabled.
  1686. vgaarb: loaded
  1687. SCSI subsystem initialized
  1688. usbcore: registered new interface driver usbfs
  1689. usbcore: registered new interface driver hub
  1690. usbcore: registered new device driver usb
  1691. LinuxPPS API ver. 1 registered
  1692. Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  1693. PCI: Probing PCI hardware (bus 00)
  1694. pci 0000:00:00.0: PCI bridge to [bus 03-03]
  1695. pci 0000:00:01.0: PCI bridge to [bus 01-02]
  1696. pci 0000:01:00.0: PCI bridge to [bus 02-02]
  1697. vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=none,locks=none
  1698. vgaarb: device added: PCI:0000:02:03.0,decodes=io+mem,owns=none,locks=none
  1699. PCI->APIC IRQ transform: (D0, B3,S0,F0, P0) -> 16
  1700. PCI->APIC IRQ transform: (D0, B3,S0,F1, P1) -> 17
  1701. PCI->APIC IRQ transform: (D0, B1,S0,F0, P0) -> 16
  1702. PCI->APIC IRQ transform: (D0, B2,S3,F0, P0) -> 19
  1703. pci 0000:03:00.0: BAR 6: assigned [mem 0x92000000-0x9201ffff pref]
  1704. pci 0000:00:00.0: PCI bridge to [bus 03-03]
  1705. pci 0000:00:00.0: bridge window [io 0x2000-0x2fff]
  1706. pci 0000:00:00.0: bridge window [mem 0x85000000-0x85ffffff]
  1707. pci 0000:00:00.0: bridge window [mem 0x92000000-0xb0ffffff pref]
  1708. pci 0000:02:03.0: BAR 6: assigned [mem 0x90000000-0x9000ffff pref]
  1709. pci 0000:01:00.0: PCI bridge to [bus 02-02]
  1710. pci 0000:01:00.0: bridge window [io disabled]
  1711. pci 0000:01:00.0: bridge window [mem 0x81000000-0x82ffffff]
  1712. pci 0000:01:00.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
  1713. pci 0000:00:01.0: PCI bridge to [bus 01-02]
  1714. pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
  1715. pci 0000:00:01.0: bridge window [mem 0x80000000-0x83ffffff]
  1716. pci 0000:00:01.0: bridge window [mem 0x90000000-0x91ffffff 64bit pref]
  1717. Switching to clocksource lt
  1718. pnp: PnP ACPI: disabled
  1719. NET: Registered protocol family 2
  1720. IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
  1721. TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
  1722. TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  1723. TCP: Hash tables configured (established 524288 bind 65536)
  1724. TCP reno registered
  1725. UDP hash table entries: 16384 (order: 7, 524288 bytes)
  1726. UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
  1727. NET: Registered protocol family 1
  1728. RPC: Registered udp transport module.
  1729. RPC: Registered tcp transport module.
  1730. RPC: Registered tcp NFSv4.1 backchannel transport module.
  1731. pci 0000:01:04.1: EHCI: unrecognized capability 00
  1732. platform rtc: registered platform RTC device (no PNP device found)
  1733. RESTART daemon started
  1734. pci 0000:01:02.3: allocated PCI BAR #1: base 0x83202000
  1735. pci 0000:01:02.3: mcst-gpio: MCST-GPIO support successfully loaded.
  1736. i2c_spi 0000:01:02.1: probed
  1737. l_i2c l_i2c.0: i2c_cbase = 0000e40000024014, i2c_dbase = 0000e40000028040
  1738. l_i2c l_i2c.0: I2C adapter 0 registered
  1739. l_i2c l_i2c.0: I2C adapter 1 registered
  1740. l_i2c l_i2c.0: I2C adapter 2 registered
  1741. l_i2c l_i2c.0: I2C adapter 3 registered
  1742. l_spi l_spi.0: probed
  1743. audit: initializing netlink socket (disabled)
  1744. type=2000 audit(1.150:1): initialized
  1745. HugeTLB registered 2 MB page size, pre-allocated 0 pages
  1746. VFS: Disk quotas dquot_6.5.2
  1747. Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  1748. Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  1749. msgmni has been set to 32768
  1750. alg: No test for stdrng (krng)
  1751. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  1752. io scheduler noop registered
  1753. io scheduler deadline registered
  1754. io scheduler cfq registered (default)
  1755. LTT : ltt-relay init
  1756. pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  1757. lynxfb: no options.
  1758. lynxfb: share->revid = a0
  1759. lynxfb: enable 2d acceleration
  1760. lynxfb: no specific g_option.
  1761. lynxfb: video memory size = 16 mb
  1762. lynxfb: video memory vaddr = 0000e40004280000
  1763. lynxfb: sm718 mmio address = 0000e40004000000
  1764. lynxfb: framebuffer #0 alloc okay
  1765. lynxfb: use simul primary mode
  1766. lynxfb: crtc->cursor.mmio = 0000e400040800f0
  1767. lynxfb: ret = 5, fb_find_mode failed, with driver prepared modes
  1768. lynxfb: success! use specified mode:800x600-8@60 in kernel prepared default modedb
  1769. lynxfb: Member of info->var is :
  1770. xres=800
  1771. yres=600
  1772. xres_virtual=800
  1773. yres_virtual=600
  1774. xoffset=0
  1775. yoffset=0
  1776. bits_per_pixel=8
  1777. ...
  1778. lynxfb: fix->smem_start = 81000000
  1779. lynxfb: fix->smem_len = 1000000
  1780. lynxfb: fix->mmio_start = 82000000
  1781. lynxfb: fix->mmio_len = 200000
  1782. lynxfb: Ready to register framebuffer #0.
  1783. lynxfb: primary channel
  1784. Set Panel Plane enbit:after tried 1 times
  1785. lynxfb: ddk setlogicdispout done
  1786. Console: switching to colour frame buffer device 100x37
  1787. lynxfb: Accomplished register framebuffer #0.
  1788. [drm] Initialized drm 1.1.0 20060810
  1789. [drm] radeon kernel modesetting enabled.
  1790. [drm] initializing kernel modesetting (CAICOS 0x1002:0x6779 0x1458:0x22A3).
  1791. [drm] register mmio base: 0x85000000
  1792. [drm] register mmio size: 131072
  1793. ATOM BIOS: GV
  1794. radeon 0000:03:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
  1795. radeon 0000:03:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
  1796. [drm] Detected VRAM RAM=1024M, BAR=256M
  1797. [drm] RAM width 64bits DDR
  1798. [TTM] Zone kernel: Available graphics memory: 12290914 kiB
  1799. [TTM] Zone dma32: Available graphics memory: 2097152 kiB
  1800. [TTM] Initializing pool allocator
  1801. [TTM] Initializing DMA pool allocator
  1802. [drm] radeon: 1024M of VRAM memory ready
  1803. [drm] radeon: 512M of GTT memory ready.
  1804. platform radeon_uvd.0: firmware: using built-in firmware radeon/SUMO_uvd.bin
  1805. [drm] GART: num cpu pages 131072, num gpu pages 131072
  1806. [drm] probing gen 2 caps for device e3e3:abcd = 323c81/0
  1807. [drm] Loading CAICOS Microcode
  1808. platform radeon_cp.0: firmware: using built-in firmware radeon/CAICOS_pfp.bin
  1809. platform radeon_cp.0: firmware: using built-in firmware radeon/CAICOS_me.bin
  1810. platform radeon_cp.0: firmware: using built-in firmware radeon/BTC_rlc.bin
  1811. platform radeon_cp.0: firmware: using built-in firmware radeon/CAICOS_mc.bin
  1812. [drm] PCIE GART of 512M enabled (table at 0x0000000000273000).
  1813. radeon 0000:03:00.0: WB enabled
  1814. radeon 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x0000d015e5a7dc00
  1815. radeon 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0000d015e5a7dc0c
  1816. [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  1817. [drm] Driver supports precise vblank timestamp query.
  1818. radeon 0000:03:00.0: radeon: using MSI.
  1819. [drm] radeon: irq initialized.
  1820. [drm] ring test on 0 succeeded in 1 usecs
  1821. [drm] ring test on 3 succeeded in 0 usecs
  1822. [drm] ib test on ring 0 succeeded in 0 usecs
  1823. [drm] ib test on ring 3 succeeded in 0 usecs
  1824. [drm] Radeon Display Connectors
  1825. [drm] Connector 0:
  1826. [drm] HDMI-A-1
  1827. [drm] HPD2
  1828. [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
  1829. [drm] Encoders:
  1830. [drm] DFP1: INTERNAL_UNIPHY1
  1831. [drm] Connector 1:
  1832. [drm] DVI-D-1
  1833. [drm] HPD4
  1834. [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
  1835. [drm] Encoders:
  1836. [drm] DFP2: INTERNAL_UNIPHY
  1837. [drm] Connector 2:
  1838. [drm] VGA-1
  1839. [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
  1840. [drm] Encoders:
  1841. [drm] CRT1: INTERNAL_KLDSCP_DAC1
  1842. [drm] Internal thermal controller with fan control
  1843. [drm] radeon: power management initialized
  1844. radeon 0000:03:00.0: No connectors reported connected with modes
  1845. [drm] Cannot find any crtc or sizes - going 1024x768
  1846. [drm] fb mappable at 0xA0375000
  1847. [drm] vram apper at 0xA0000000
  1848. [drm] size 3145728
  1849. [drm] fb depth is 24
  1850. [drm] pitch is 4096
  1851. radeon 0000:03:00.0: fb1: radeondrmfb frame buffer device
  1852. radeon 0000:03:00.0: registered panic notifier
  1853. [drm] Initialized radeon 2.33.0 20080528 for 0000:03:00.0 on minor 0
  1854. Serial 8250/16550: console probe ... is not detected
  1855. Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  1856. Serial: 85c30 driver $ 2 ports, IRQ sharing enabled
  1857. 0000:01:02.2: ttyS0 at MMIO 0x83200040 (irq = 3) is a Z85c30 ESCC - Serial port
  1858. 0000:01:02.2: ttyS1 at MMIO 0x83200042 (irq = 3) is a Z85c30 ESCC - Serial port
  1859. serial_zilog_probe: register IRQ #3 and set interrupt handler.
  1860. brd: module loaded
  1861. Uniform Multi-Platform E-IDE driver
  1862. ELBRUS 0000:01:02.0: IDE controller (0x8086:0x4d49 rev 0x80)
  1863. 0000:01:02.0: Unmask interrupts
  1864. ELBRUS 0000:01:02.0: 100% native mode on irq 11
  1865. ide0: BM-DMA at 0x1020-0x1027
  1866. ide1: BM-DMA at 0x1028-0x102f
  1867. hdc: ULTIMATE CF CARD, CFA DISK drive
  1868. hdc: UDMA/100 mode selected
  1869. ide0 at 0x1000-0x1007,0x100a on irq 11
  1870. ide1 at 0x1010-0x1017,0x101a on irq 11
  1871. ide-gd driver 1.18
  1872. hdc: max request size: 512KiB
  1873. hdc: 31227840 sectors (15988 MB) w/1KiB Cache, CHS=1943/255/63
  1874. hdc: cache flushes supported
  1875. hdc: hdc1
  1876. ide-cd driver 5.00
  1877. ahci 0000:01:03.0: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0xf impl SATA mode
  1878. ahci 0000:01:03.0: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
  1879. scsi0 : ahci
  1880. scsi1 : ahci
  1881. scsi2 : ahci
  1882. scsi3 : ahci
  1883. ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 21
  1884. ata2: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed irq 21
  1885. ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 21
  1886. ata4: SATA max UDMA/133 abar m8192@0x83204000 port 0x83204280 irq 21
  1887. l_e1000.c:v1.00 08.07.2008 alexmipt@mcst.ru
  1888. assigned IRQ 10.
  1889. eth0: registered as L-E1000
  1890. eth0 : L-E1000 (rev. 1) 0000:01:01.0
  1891. e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
  1892. e100: Copyright(c) 1999-2006 Intel Corporation
  1893. PCC: drv_mode=DMA
  1894. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  1895. ehci_hcd 0000:01:04.1: EHCI Host Controller
  1896. ehci_hcd 0000:01:04.1: new USB bus registered, assigned bus number 1
  1897. ehci_hcd 0000:01:04.1: irq 20, io mem 0x83207000
  1898. ehci_hcd 0000:01:04.1: USB 2.0 started, EHCI 1.00
  1899. usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  1900. usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1901. usb usb1: Product: EHCI Host Controller
  1902. usb usb1: Manufacturer: Linux 2.6.33-elbrus.033.6.57 ehci_hcd
  1903. usb usb1: SerialNumber: 0000:01:04.1
  1904. hub 1-0:1.0: USB hub found
  1905. hub 1-0:1.0: 2 ports detected
  1906. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  1907. ohci_hcd 0000:01:04.0: OHCI Host Controller
  1908. ohci_hcd 0000:01:04.0: new USB bus registered, assigned bus number 2
  1909. ohci_hcd 0000:01:04.0: irq 20, io mem 0x83206000
  1910. usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  1911. usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1912. usb usb2: Product: OHCI Host Controller
  1913. usb usb2: Manufacturer: Linux 2.6.33-elbrus.033.6.57 ohci_hcd
  1914. usb usb2: SerialNumber: 0000:01:04.0
  1915. ata4: SATA link down (SStatus 0 SControl 300)
  1916. hub 2-0:1.0: USB hub found
  1917. hub 2-0:1.0: 2 ports detected
  1918. uhci_hcd: USB Universal Host Controller Interface driver
  1919. Initializing USB Mass Storage driver...
  1920. usbcore: registered new interface driver usb-storage
  1921. USB Mass Storage support registered.
  1922. usbcore: registered new interface driver libusual
  1923. i8042.c: No controller found.
  1924. mice: PS/2 mouse device common for all mice
  1925. usbcore: registered new interface driver usbtouchscreen
  1926. rtc-cy14b101p spi0.1: rtc core: registered cy14b101p as rtc0
  1927. RTC is used for SCLKR. Alarm functionality is disabled
  1928. wd: set I2C-SPI watchdog timer
  1929. usb 1-1: new high speed USB device using ehci_hcd and address 2
  1930. cpuidle: using governor ladder
  1931. cpuidle: using governor menu
  1932. cpuidle: using governor rt
  1933. sdhci: Secure Digital Host Controller Interface driver
  1934. sdhci: Copyright(c) Pierre Ossman
  1935. usbcore: registered new interface driver hiddev
  1936. usbcore: registered new interface driver usbhid
  1937. usbhid: USB HID core driver
  1938. dmp_assist driver installed. Major:0xf2(242)
  1939. TCP cubic registered
  1940. NET: Registered protocol family 17
  1941. Measuring thread context switch cost...
  1942. 12500 iterations in 20000000 nanoseconds
  1943. Thread context switch cost is 3660 cycles (CPU at 800000 kHz).
  1944. rtc-cy14b101p spi0.1: setting system clock to 2015-12-10 13:21:17 UTC (1449753677)
  1945. usb 1-1: New USB device found, idVendor=04b4, idProduct=6560
  1946. usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  1947. hub 1-1:1.0: USB hub found
  1948. hub 1-1:1.0: 4 ports detected
  1949. usb 1-2: new high speed USB device using ehci_hcd and address 3
  1950. ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  1951. ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  1952. ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  1953. ata2.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133
  1954. ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
  1955. ata3.00: ATAPI: ATAPI iHAS124 F, CL05, max UDMA/133
  1956. ata1.00: ATA-8: KINGSTON SMS200S3120G, 603ABBF0, max UDMA/133
  1957. ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
  1958. ata2.00: configured for UDMA/133
  1959. ata3.00: configured for UDMA/133
  1960. ata1.00: configured for UDMA/133
  1961. scsi 0:0:0:0: Direct-Access ATA KINGSTON SMS200S 603A PQ: 0 ANSI: 5
  1962. usb 1-2: New USB device found, idVendor=04b4, idProduct=6560
  1963. usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  1964. hub 1-2:1.0: USB hub found
  1965. scsi 1:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 01.0 PQ: 0 ANSI: 5
  1966. hub 1-2:1.0: 4 ports detected
  1967. sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
  1968. scsi 2:0:0:0: CD-ROM ATAPI iHAS124 F CL05 PQ: 0 ANSI: 5
  1969. sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
  1970. sd 1:0:0:0: [sdb] 4096-byte physical blocks
  1971. sd 0:0:0:0: [sda] Write Protect is off
  1972. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  1973. sd 1:0:0:0: [sdb] Write Protect is off
  1974. sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  1975. sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
  1976. Uniform CD-ROM driver Revision: 3.20
  1977. sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
  1978. sdb: unknown partition table
  1979. sd 0:0:0:0: [sda] Attached SCSI disk
  1980. sd 1:0:0:0: [sdb] Attached SCSI disk
  1981. md: Waiting for all devices to be available before autodetect
  1982. md: If you don't use raid, use raid=noautodetect
  1983. md: Autodetecting RAID arrays.
  1984. md: Scanned 0 and added 0 devices.
  1985. md: autorun ...
  1986. md: ... autorun DONE.
  1987. EXT4-fs (sda3): mounted filesystem with ordered data mode
  1988. VFS: Mounted root (ext2 filesystem) readonly on device 8:3.
  1989. Freeing unused kernel init text: from 0xd0000287d000 to 0xd000029cc1c8 1340k freed
  1990. Freeing unused kernel init data: from 0xd00002c4b000 to 0xd00002c62000 92k freed
  1991. CFS CPU scheduler.
  1992. Start Init: REBOOT
  1993.  
  1994. init ignored
  1995.  
  1996. Исполнение /sbin/init REBOOT
  1997.  
  1998. INIT: version 2.88 booting
  1999.  
  2000.  
  2001. Mounting kernel-based file systems: /proc /sys [ OK ]
  2002. Setting unicode mode: unicode_stop_global...
  2003. Couldn't open /dev/console [ OK ]
  2004. Loading keymap:
  2005. /usr/share/keymaps/i386/qwerty/ruwin_ct_sh-KOI8-R.map.gz... [ OK ]
  2006. Setting screen font to /usr/share/consolefonts/UniCyr_8x16.psf.gz -m
  2007. /usr/share/consoletrans/koi8-r_to_uni.trans... [ FAIL ]
  2008. Activating all swap files/partitions...
  2009. Adding 4194296k swap on /dev/sda2.
  2010. Priority:42 extents:1 across:4194296k SSD [ OK ]
  2011. Mounting root file system in read-only mode... [ OK ]
  2012. Checking file systems...
  2013. /dev/sda3: clean, 565897/1310720 files, 3153980/5242880 blocks
  2014. /dev/sda1: clean, 33/65536 files, 82364/262144 blocks
  2015. /dev/sda5: clean, 274/655360 files, 80873/2621440 blocks
  2016. /dev/sda6: clean, 1666/655360 files, 91412/2621440 blocks
  2017. /dev/sda7: clean, 11/4382720 files, 321122/17507702 blocks [ OK ]
  2018. Remounting root file system in read-write mode... [ OK ]
  2019. Recording existing mounts in /etc/mtab... [ OK ]
  2020. Mounting remaining file systems...
  2021. EXT4-fs (sda1): mounted filesystem with ordered data mode
  2022. EXT4-fs (sda5): mounted filesystem with ordered data mode
  2023. EXT4-fs (sda6): mounted filesystem with ordered data mode
  2024. EXT4-fs (sda7): mounted filesystem with ordered data mode [ OK ]
  2025. Mounting hugetlbfs in /mnt/huge... [ OK ]
  2026. Calculating module dependencies... [ OK ]
  2027. Loading modules: lp parport_povozka snd-mixer-oss snd-pcm-oss snd-cs4281[ OK ]
  2028. Starting system message bus
  2029. Starting udev daemon... [ OK ]
  2030. loop: module loaded [ OK ]
  2031. Starting udisks-daemon
  2032. Cleaning file systems: /tmp /var/lock /var/run [ OK ]
  2033. Setting core file name pattern...
  2034. Initializing random number generator [ OK ]
  2035. Bringing up the loopback interface... [ OK ]
  2036. Setting hostname to MONOCUB-10-XX... [ OK ]
  2037. Setting kernel runtime parameters... [ OK ]
  2038. Starting ntpwr...
  2039. i2c /dev entries driver
  2040. Battery is not present
  2041. Starting atx...
  2042. input: ltc2954 as /devices/platform/ltc2954/input/input0
  2043. ATX button: path to input /sys/class/input/input0
  2044. /etc/rc.d/rcsysinit.d/S98atx:
  2045. line 45: /sys/class/input/input0/poll:
  2046. No such file or directory ATX
  2047. button: input device /dev/input/event0 starting atxd... [ OK ]
  2048. INIT: Entering runlevel: 5
  2049. Starting system log daemon... [ OK ]
  2050. Starting kernel log daemon... [ OK ]
  2051. Bringing up the eth0 interface...
  2052. eth0: link up, 1000Mbps, full-duplex, lpa 0xC5E1
  2053. PREFIX переменная отсутствует в
  2054. /etc/sysconfig/network-devices/ifconfig.eth0/ipv4, использую 24. [ WARN ]
  2055. Добавление IPv4 адреса 192.168.21.86 к eth0 интерфейсу... [ OK ]
  2056. Установка шлюза по умолчанию : 192.168.21.1 [ OK ]
  2057. Starting ercd... [ OK ]
  2058. Starting RPC Portmap
  2059. NET: Registered protocol family 10 [ OK ]
  2060. Starting xinetd... [ OK ]
  2061. Starting sshd: [ OK ]
  2062. Starting cron... [ OK ]
  2063. Starting atd... [ OK ]
  2064. Starting gpm... [ OK ]
  2065. Starting SMP IRQ Balancer: irqbalance
  2066. success
  2067. cups: started scheduler.
  2068. vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=none
  2069.  
  2070.  
  2071.  
  2072. MONOCUB-10-XX login:
  2073.  
  2074.  
  2075.  
  2076.  
  2077.  
  2078.  
  2079.  
  2080.  
  2081. MONOCUB-10-XX login: root
  2082.  
  2083.  
  2084. Password:
  2085.  
  2086. MONOCUB-10-XX ~> halt -p
  2087.  
  2088.  
  2089.  
  2090.  
  2091. Broadcast message from root@MONOCUB-10-XX (ttyS0) (Thu Dec 10 16:23:35 2015):
  2092. The system is going down for system halt NOW!
  2093.  
  2094.  
  2095. INIT
  2096. INIT: Sending processes the TERM signal
  2097. success
  2098. cups: stopped scheduler.
  2099. Stopping cron... [ OK ]
  2100. Stopping atd... [ OK ]
  2101. PREFIX переменная отсутствует в
  2102. /etc/sysconfig/network-devices/ifconfig.eth0/ipv4, использую 24. [ WARN ]
  2103. Удаление шлюза по умолчанию [ OK ]
  2104. Удаление IPv4 адреса 192.168.21.86/24 из интерфейса eth0 [ OK ]
  2105. Bringing down the eth0 interface... [ OK ]
  2106. Stopping kernel log daemon... [ OK ]
  2107. Stopping system log daemon... [ OK ]
  2108. Saving random seed [ OK ]
  2109. Sending all processes the TERM signal... [ OK ]
  2110. Sending all processes the KILL signal... [ OK ]
  2111. Unmounting all other currently mounted file systems... [ OK ]
  2112. Deactivating all swap files/partitions... [ OK ]
  2113. Bringing down the loopback interface... [ OK ]
  2114. md: stopping all md devices.
  2115. sd 1:0:0:0: [sdb] Synchronizing SCSI cache
  2116. sd 1:0:0:0: [sdb] Stopping disk
  2117. sd 0:0:0:0: [sda] Synchronizing SCSI cache
  2118. sd 0:0:0:0: [sda] Stopping disk
  2119. Shutdown: hdc
  2120. Disabling non-boot CPUs ...
  2121. Broke affinity for irq 5
  2122. CPU 1 is now offline
  2123. Broke affinity for irq 11
  2124. Broke affinity for irq 21
  2125. Broke affinity for irq 40
  2126. CPU 2 is now offline
  2127. Broke affinity for irq 20
  2128. CPU 3 is now offline
  2129. Power down.
  2130. System power off...
  2131. Hardware power off is not until implemented by boot/kernel, so use manual mode
RAW Paste Data