API tools faq
paste
Guest User

Untitled

a guest
Jun 30th, 2023
187
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 119.44 KB | None | 0 0
raw download clone embed print report
  1. DDR Version V1.13 20220218
  2. In
  3. ddrconfig:0
  4. LP4 MR14:0x4d
  5. LPDDR4, 324MHz
  6. BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB
  7. tdqss: cs0 dqs0: 385ps, dqs1: 313ps, dqs2: 409ps, dqs3: 289ps,
  8.  
  9. change to: 324MHz
  10. PHY drv:clk:38,ca:38,DQ:30,odt:0
  11. vrefinner:41%, vrefout:41%
  12. dram drv:40,odt:0
  13. clk skew:0x58
  14.  
  15. change to: 528MHz
  16. PHY drv:clk:38,ca:38,DQ:30,odt:0
  17. vrefinner:41%, vrefout:41%
  18. dram drv:40,odt:0
  19. clk skew:0x75
  20.  
  21. change to: 780MHz
  22. PHY drv:clk:38,ca:38,DQ:30,odt:0
  23. vrefinner:41%, vrefout:41%
  24. dram drv:40,odt:0
  25. clk skew:0x58
  26.  
  27. change to: 1560MHz(final freq)
  28. PHY drv:clk:38,ca:38,DQ:30,odt:60
  29. vrefinner:16%, vrefout:29%
  30. dram drv:40,odt:80
  31. vref_ca:00000068
  32. clk skew:0x13
  33. cs 0:
  34. the read training result:
  35. DQS0:0x38, DQS1:0x37, DQS2:0x3a, DQS3:0x34,
  36. min :0x13 0x15 0x14 0x10 0x2 0x7 0xf 0x5 , 0xb 0xc 0x2 0x2 0xb 0x7 0xd 0xa ,
  37. 0x16 0x16 0xf 0xd 0x3 0x2 0x4 0x7 , 0xe 0xa 0xa 0x2 0xd 0xe 0xd 0x12 ,
  38. mid :0x2f 0x2f 0x2f 0x2c 0x1f 0x23 0x2a 0x21 ,0x28 0x28 0x1e 0x1f 0x28 0x25 0x29 0x26 ,
  39. 0x31 0x31 0x2a 0x29 0x20 0x1e 0x1f 0x21 ,0x29 0x25 0x25 0x1c 0x28 0x2a 0x27 0x2e ,
  40. max :0x4b 0x4a 0x4b 0x49 0x3d 0x3f 0x45 0x3d ,0x45 0x44 0x3b 0x3c 0x45 0x43 0x46 0x42 ,
  41. 0x4d 0x4d 0x46 0x45 0x3d 0x3a 0x3b 0x3c ,0x44 0x41 0x40 0x37 0x44 0x46 0x42 0x4a ,
  42. range:0x38 0x35 0x37 0x39 0x3b 0x38 0x36 0x38 ,0x3a 0x38 0x39 0x3a 0x3a 0x3c 0x39 0x38 ,
  43. 0x37 0x37 0x37 0x38 0x3a 0x38 0x37 0x35 ,0x36 0x37 0x36 0x35 0x37 0x38 0x35 0x38 ,
  44. the write training result:
  45. DQS0:0x5f, DQS1:0x51, DQS2:0x64, DQS3:0x4c,
  46. min :0xa8 0xac 0xad 0xaa 0x9a 0x9f 0xa5 0xa1 0xa0 ,0x99 0x98 0x93 0x93 0x9a 0x97 0x9a 0x9c 0x95 ,
  47. 0xac 0xab 0xa4 0xa3 0x9e 0x99 0x9c 0xa0 0xa0 ,0x95 0x95 0x93 0x8e 0x97 0x9a 0x95 0xa0 0x8e ,
  48. mid :0xc5 0xc8 0xc9 0xc5 0xb4 0xb9 0xc1 0xbb 0xba ,0xb5 0xb3 0xab 0xab 0xb4 0xb1 0xb5 0xb4 0xaf ,
  49. 0xc8 0xc7 0xbf 0xbe 0xb8 0xb4 0xb6 0xbb 0xbb ,0xb1 0xb0 0xad 0xa7 0xb1 0xb4 0xb0 0xba 0xa9 ,
  50. max :0xe3 0xe4 0xe6 0xe1 0xcf 0xd3 0xdd 0xd5 0xd5 ,0xd2 0xcf 0xc4 0xc3 0xce 0xcb 0xd0 0xcc 0xc9 ,
  51. 0xe5 0xe4 0xdb 0xda 0xd3 0xcf 0xd1 0xd6 0xd7 ,0xcd 0xcb 0xc8 0xc1 0xcc 0xcf 0xcc 0xd4 0xc4 ,
  52. range:0x3b 0x38 0x39 0x37 0x35 0x34 0x38 0x34 0x35 ,0x39 0x37 0x31 0x30 0x34 0x34 0x36 0x30 0x34 ,
  53. 0x39 0x39 0x37 0x37 0x35 0x36 0x35 0x36 0x37 ,0x38 0x36 0x35 0x33 0x35 0x35 0x37 0x34 0x36 ,
  54. CA Training result:
  55. cs:0 min :0x48 0x3c 0x39 0x30 0x3e 0x2d 0x3d ,0x4d 0x40 0x43 0x33 0x43 0x36 0x47 ,
  56. cs:0 mid :0x81 0x7d 0x72 0x71 0x74 0x6d 0x63 ,0x86 0x83 0x7b 0x71 0x7a 0x76 0x6c ,
  57. cs:0 max :0xba 0xbf 0xab 0xb2 0xaa 0xae 0x8a ,0xc0 0xc6 0xb4 0xb0 0xb1 0xb6 0x92 ,
  58. cs:0 range:0x72 0x83 0x72 0x82 0x6c 0x81 0x4d ,0x73 0x86 0x71 0x7d 0x6e 0x80 0x4b ,
  59. out
  60.  
  61. U-Boot SPL 2023.07-rc4-bpi (Jun 30 2023 - 12:25:49 +0000)
  62. Trying to boot from MMC1
  63. ## Checking hash(es) for config config-1 ... OK
  64. ## Checking hash(es) for Image atf-1 ... sha256+ OK
  65. ## Checking hash(es) for Image u-boot ... sha256+ OK
  66. ## Checking hash(es) for Image fdt-1 ... sha256+ OK
  67. ## Checking hash(es) for Image atf-2 ... sha256+ OK
  68. ## Checking hash(es) for Image atf-3 ... sha256+ OK
  69. ## Checking hash(es) for Image atf-4 ... sha256+ OK
  70. ## Checking hash(es) for Image atf-5 ... sha256+ OK
  71. ## Checking hash(es) for Image atf-6 ... sha256+ OK
  72. INFO: Preloader serial: 2
  73. NOTICE: BL31: v2.3():v2.3-389-g4613ae965:cl
  74. NOTICE: BL31: Built : 11:21:14, Jul 7 2022
  75. INFO: GICv3 without legacy support detected.
  76. INFO: ARM GICv3 driver initialized in EL3
  77. INFO: pmu v1 is valid 220114
  78. INFO: dfs DDR fsp_param[0].freq_mhz= 1560MHz
  79. INFO: dfs DDR fsp_param[1].freq_mhz= 324MHz
  80. INFO: dfs DDR fsp_param[2].freq_mhz= 528MHz
  81. INFO: dfs DDR fsp_param[3].freq_mhz= 780MHz
  82. INFO: Using opteed sec cpu_context!
  83. INFO: boot cpu mask: 0
  84. INFO: BL31: Initializing runtime services
  85. WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPK
  86. ERROR: Error initializing runtime service opteed_fast
  87. INFO: BL31: Preparing for EL3 exit to normal world
  88. INFO: Entry point address = 0xa00000
  89. INFO: SPSR = 0x3c9
  90.  
  91.  
  92. U-Boot 2023.07-rc4-bpi (Jun 30 2023 - 12:25:49 +0000)
  93.  
  94. Model: Rockchip RK3568 EVB1 DDR4 V10 Board
  95. DRAM: 2 GiB
  96. PMIC: RK8090 (on=0x40, off=0x00)
  97. Core: 301 devices, 22 uclasses, devicetree: separate
  98. MMC: mmc@fe2b0000: 1, mmc@fe310000: 0
  99. Loading Environment from nowhere... OK
  100. In: serial@fe660000
  101. Out: serial@fe660000
  102. Err: serial@fe660000
  103. Model: Rockchip RK3568 EVB1 DDR4 V10 Board
  104. Hit any key to stop autoboot: 0
  105. Interface: mmc
  106. Device 1: Vendor: Man 000028 Snr 0340d600 Rev: 11.10 Prod: LEXAR
  107. Type: Removable Hard Disk
  108. Capacity: 15271.0 MB = 14.9 GB (31275008 x 512)
  109. Filesystem: FAT16 "BPI-BOOT "
  110. Boot from SD
  111. file not found
  112.  
  113.  
  114. *** U-Boot Boot Menu ***
  115.  
  116. 1. Boot from SD/EMMC.
  117. mmc 1:2
  118. mmc 1:3
  119. U-Boot consoleHit any key to stop autoboot: 2 Hit any key to stop autoboot: 1
  120.  
  121.  
  122. Press UP/DOWN to move, ENTER to select, ESC to quit
  123.  
  124.  
  125.  
  126.  
  127.  
  128.  
  129.  
  130.  
  131.  
  132.  
  133.  
  134.  
  135.  
  136.  
  137. ## Error: "initrd" not defined
  138. fit=bpi-r2pro.itb
  139. 10370249 bytes read in 863 ms (11.5 MiB/s)
  140. ## Loading kernel from FIT Image at 00c00800 ...
  141. Using 'conf' configuration
  142. Verifying Hash Integrity ... OK
  143. Trying 'kernel' kernel subimage
  144. Description: Linux Kernel 6.1.34-main
  145. Type: Kernel Image
  146. Compression: gzip compressed
  147. Data Start: 0x00c008d8
  148. Data Size: 10308450 Bytes = 9.8 MiB
  149. Architecture: AArch64
  150. OS: Linux
  151. Load Address: 0x02080000
  152. Entry Point: 0x02080000
  153. Hash algo: sha256
  154. Hash value: e79bba31f3405d66fb88dbe0b16c8cf6e4711902c08e6944c886081a14957c64
  155. Verifying Hash Integrity ... sha256+ OK
  156. ## Loading fdt from FIT Image at 00c00800 ...
  157. Using 'conf' configuration
  158. Verifying Hash Integrity ... OK
  159. Trying 'fdt' fdt subimage
  160. Description: Flattened Device Tree blob
  161. Type: Flat Device Tree
  162. Compression: uncompressed
  163. Data Start: 0x015d553c
  164. Data Size: 60074 Bytes = 58.7 KiB
  165. Architecture: AArch64
  166. Hash algo: sha256
  167. Hash value: 486fcb9976c6253e4d7a04e0c539ed82f8e08c067536f9f3dae977ead80a8b41
  168. Verifying Hash Integrity ... sha256+ OK
  169. Booting using the fdt blob at 0x15d553c
  170. Working FDT set to 15d553c
  171. Uncompressing Kernel Image
  172. Loading Device Tree to 000000007ced9000, end 000000007ceeaaa9 ... OK
  173. Working FDT set to 7ced9000
  174.  
  175. Starting kernel ...
  176.  
  177. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
  178. [ 0.000000] Linux version 6.1.34-bpi-r2pro-main (runner@fv-az563-283) (aarch64-linux-gnu-gcc (Ubuntu 11.3.0-1u3
  179. [ 0.000000] Machine model: Bananapi-R2 Pro (RK3568) DDR4 Board
  180. [ 0.000000] efi: UEFI not found.
  181. [ 0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader!
  182. [ 0.000000] NUMA: No NUMA configuration found
  183. [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x000000007fffffff]
  184. [ 0.000000] NUMA: NODE_DATA [mem 0x7fb9ea00-0x7fba0fff]
  185. [ 0.000000] Zone ranges:
  186. [ 0.000000] DMA [mem 0x0000000000200000-0x000000007fffffff]
  187. [ 0.000000] DMA32 empty
  188. [ 0.000000] Normal empty
  189. [ 0.000000] Movable zone start for each node
  190. [ 0.000000] Early memory node ranges
  191. [ 0.000000] node 0: [mem 0x0000000000200000-0x000000007fffffff]
  192. [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
  193. [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
  194. [ 0.000000] cma: Reserved 32 MiB at 0x000000007ae00000
  195. [ 0.000000] psci: probing for conduit method from DT.
  196. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  197. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  198. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  199. [ 0.000000] psci: SMC Calling Convention v1.2
  200. [ 0.000000] percpu: Embedded 28 pages/cpu s75432 r8192 d31064 u114688
  201. [ 0.000000] pcpu-alloc: s75432 r8192 d31064 u114688 alloc=28*4096
  202. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  203. [ 0.000000] Detected VIPT I-cache on CPU0
  204. [ 0.000000] CPU features: detected: GIC system register CPU interface
  205. [ 0.000000] CPU features: detected: Virtualization Host Extensions
  206. [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
  207. [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
  208. [ 0.000000] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009
  209. [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
  210. [ 0.000000] alternatives: applying boot alternatives
  211. [ 0.000000] Fallback order for Node 0: 0
  212. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515592
  213. [ 0.000000] Policy zone: DMA
  214. [ 0.000000] Kernel command line: board=bpi-r2pro root=/dev/mmcblk0p3 rootfstype=ext4 rootwait net.ifnames=0
  215. [ 0.000000] Unknown kernel command line parameters "board=bpi-r2pro", will be passed to user space.
  216. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  217. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  218. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  219. [ 0.000000] Memory: 1992700K/2095104K available (14848K kernel code, 2870K rwdata, 4900K rodata, 5312K init, 6)
  220. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  221. [ 0.000000] ftrace: allocating 48981 entries in 192 pages
  222. [ 0.000000] ftrace: allocated 192 pages with 2 groups
  223. [ 0.000000] trace event string verifier disabled
  224. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  225. [ 0.000000] rcu: RCU event tracing is enabled.
  226. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
  227. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  228. [ 0.000000] Rude variant of Tasks RCU enabled.
  229. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  230. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  231. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  232. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  233. [ 0.000000] GICv3: 320 SPIs implemented
  234. [ 0.000000] GICv3: 0 Extended SPIs implemented
  235. [ 0.000000] GICv3: MBI range [296:319]
  236. [ 0.000000] GICv3: Using MBI frame 0x00000000fd410000
  237. [ 0.000000] Root IRQ handler: gic_handle_irq
  238. [ 0.000000] GICv3: GICv3 features: 16 PPIs
  239. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
  240. [ 0.000000] ITS: No ITS available, not enabling LPIs
  241. [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  242. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  243. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795s
  244. [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  245. [ 0.000862] Console: colour dummy device 80x25
  246. [ 0.001615] printk: console [tty0] enabled
  247. [ 0.001745] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=960)
  248. [ 0.001787] pid_max: default: 32768 minimum: 301
  249. [ 0.001911] LSM: Security Framework initializing
  250. [ 0.002078] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
  251. [ 0.002124] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
  252. [ 0.003589] cacheinfo: Unable to detect cache hierarchy for CPU 0
  253. [ 0.005002] cblist_init_generic: Setting adjustable number of callback queues.
  254. [ 0.005040] cblist_init_generic: Setting shift to 2 and lim to 1.
  255. [ 0.005220] cblist_init_generic: Setting shift to 2 and lim to 1.
  256. [ 0.005620] rcu: Hierarchical SRCU implementation.
  257. [ 0.005645] rcu: Max phase no-delay instances is 1000.
  258. [ 0.006686] EFI services will not be available.
  259. [ 0.007418] smp: Bringing up secondary CPUs ...
  260. [ 0.008544] Detected VIPT I-cache on CPU1
  261. [ 0.008658] cacheinfo: Unable to detect cache hierarchy for CPU 1
  262. [ 0.008679] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000
  263. [ 0.008741] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
  264. [ 0.009894] Detected VIPT I-cache on CPU2
  265. [ 0.010001] cacheinfo: Unable to detect cache hierarchy for CPU 2
  266. [ 0.010021] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000
  267. [ 0.010068] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
  268. [ 0.011192] Detected VIPT I-cache on CPU3
  269. [ 0.011293] cacheinfo: Unable to detect cache hierarchy for CPU 3
  270. [ 0.011314] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000
  271. [ 0.011359] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
  272. [ 0.011528] smp: Brought up 1 node, 4 CPUs
  273. [ 0.011695] SMP: Total of 4 processors activated.
  274. [ 0.011715] CPU features: detected: 32-bit EL0 Support
  275. [ 0.011733] CPU features: detected: 32-bit EL1 Support
  276. [ 0.011840] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
  277. [ 0.011875] CPU features: detected: Common not Private translations
  278. [ 0.011896] CPU features: detected: CRC32 instructions
  279. [ 0.011918] CPU features: detected: RCpc load-acquire (LDAPR)
  280. [ 0.011935] CPU features: detected: LSE atomic instructions
  281. [ 0.011953] CPU features: detected: Privileged Access Never
  282. [ 0.011969] CPU features: detected: RAS Extension Support
  283. [ 0.011989] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
  284. [ 0.012116] CPU: All CPU(s) started at EL2
  285. [ 0.012140] alternatives: applying system-wide alternatives
  286. [ 0.017701] devtmpfs: initialized
  287. [ 0.036128] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  288. [ 0.036240] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  289. [ 0.037362] pinctrl core: initialized pinctrl subsystem
  290. [ 0.037965] regulator-dummy: no parameters, enabled
  291. [ 0.038558] DMI not present or invalid.
  292. [ 0.039382] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  293. [ 0.041094] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
  294. [ 0.041332] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  295. [ 0.041610] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  296. [ 0.041755] audit: initializing netlink subsys (disabled)
  297. [ 0.042108] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
  298. [ 0.044286] thermal_sys: Registered thermal governor 'fair_share'
  299. [ 0.044300] thermal_sys: Registered thermal governor 'bang_bang'
  300. [ 0.044328] thermal_sys: Registered thermal governor 'step_wise'
  301. [ 0.044347] thermal_sys: Registered thermal governor 'user_space'
  302. [ 0.044365] thermal_sys: Registered thermal governor 'power_allocator'
  303. [ 0.044468] cpuidle: using governor menu
  304. [ 0.044729] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  305. [ 0.044946] ASID allocator initialised with 32768 entries
  306. [ 0.062680] platform fe040000.vop: Fixed dependency cycle(s) with /hdmi@fe0a0000
  307. [ 0.085362] rockchip-gpio fdd60000.gpio: probed /pinctrl/gpio@fdd60000
  308. [ 0.086266] rockchip-gpio fe740000.gpio: probed /pinctrl/gpio@fe740000
  309. [ 0.087076] rockchip-gpio fe750000.gpio: probed /pinctrl/gpio@fe750000
  310. [ 0.087970] rockchip-gpio fe760000.gpio: probed /pinctrl/gpio@fe760000
  311. [ 0.088833] rockchip-gpio fe770000.gpio: probed /pinctrl/gpio@fe770000
  312. [ 0.095950] platform fe0a0000.hdmi: Fixed dependency cycle(s) with /hdmi-con
  313. [ 0.102536] KASLR enabled
  314. [ 0.120994] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
  315. [ 0.121039] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
  316. [ 0.121062] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
  317. [ 0.121081] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
  318. [ 0.121101] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
  319. [ 0.121119] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
  320. [ 0.121139] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
  321. [ 0.121157] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
  322. [ 0.122515] cryptd: max_cpu_qlen set to 1000
  323. [ 0.123916] ACPI: Interpreter disabled.
  324. [ 0.124686] dc_12v: 12000 mV, enabled
  325. [ 0.124922] reg-fixed-voltage dc-12v-regulator: dc_12v supplying 12000000uV
  326. [ 0.125205] reg-fixed-voltage vcc3v3-sys-regulator: Looking up vin-supply from device tree
  327. [ 0.125251] vcc3v3_sys: supplied by dc_12v
  328. [ 0.125276] dc_12v: could not add device link regulator.2: -ENOENT
  329. [ 0.125363] vcc3v3_sys: 3300 mV, enabled
  330. [ 0.125575] reg-fixed-voltage vcc3v3-sys-regulator: vcc3v3_sys supplying 3300000uV
  331. [ 0.125829] reg-fixed-voltage vcc5v0-sys-regulator: Looking up vin-supply from device tree
  332. [ 0.125872] vcc5v0_sys: supplied by dc_12v
  333. [ 0.125896] dc_12v: could not add device link regulator.3: -ENOENT
  334. [ 0.125979] vcc5v0_sys: 5000 mV, enabled
  335. [ 0.126196] reg-fixed-voltage vcc5v0-sys-regulator: vcc5v0_sys supplying 5000000uV
  336. [ 0.126450] reg-fixed-voltage pcie30-avdd0v9-regulator: Looking up vin-supply from device tree
  337. [ 0.126494] pcie30_avdd0v9: supplied by vcc3v3_sys
  338. [ 0.126526] vcc3v3_sys: could not add device link regulator.4: -ENOENT
  339. [ 0.126634] pcie30_avdd0v9: 900 mV, enabled
  340. [ 0.126845] reg-fixed-voltage pcie30-avdd0v9-regulator: pcie30_avdd0v9 supplying 900000uV
  341. [ 0.127086] reg-fixed-voltage pcie30-avdd1v8-regulator: Looking up vin-supply from device tree
  342. [ 0.127129] pcie30_avdd1v8: supplied by vcc3v3_sys
  343. [ 0.127154] vcc3v3_sys: could not add device link regulator.5: -ENOENT
  344. [ 0.127238] pcie30_avdd1v8: 1800 mV, enabled
  345. [ 0.127441] reg-fixed-voltage pcie30-avdd1v8-regulator: pcie30_avdd1v8 supplying 1800000uV
  346. [ 0.127732] vcc3v3_pcie: 3300 mV, disabled
  347. [ 0.127951] reg-fixed-voltage vcc3v3-pi6c-05-regulator: Looking up vin-supply from device tree
  348. [ 0.127998] vcc3v3_pcie: supplied by vcc5v0_sys
  349. [ 0.128087] reg-fixed-voltage vcc3v3-pi6c-05-regulator: vcc3v3_pcie supplying 3300000uV
  350. [ 0.128525] vcc3v3_minipcie: 3300 mV, disabled
  351. [ 0.128763] reg-fixed-voltage vcc3v3-minipcie-regulator: Looking up vin-supply from device tree
  352. [ 0.128809] vcc3v3_minipcie: supplied by vcc3v3_pcie
  353. [ 0.128902] reg-fixed-voltage vcc3v3-minipcie-regulator: vcc3v3_minipcie supplying 3300000uV
  354. [ 0.129280] vcc3v3_ngff: 3300 mV, disabled
  355. [ 0.129508] reg-fixed-voltage vcc3v3-ngff-regulator: Looking up vin-supply from device tree
  356. [ 0.129554] vcc3v3_ngff: supplied by vcc3v3_pcie
  357. [ 0.129642] reg-fixed-voltage vcc3v3-ngff-regulator: vcc3v3_ngff supplying 3300000uV
  358. [ 0.129887] reg-fixed-voltage vcc5v0-usb-regulator: Looking up vin-supply from device tree
  359. [ 0.129931] vcc5v0_usb: supplied by dc_12v
  360. [ 0.129954] dc_12v: could not add device link regulator.9: -ENOENT
  361. [ 0.130038] vcc5v0_usb: 5000 mV, enabled
  362. [ 0.130257] reg-fixed-voltage vcc5v0-usb-regulator: vcc5v0_usb supplying 5000000uV
  363. [ 0.130612] vcc5v0_usb_host: 5000 mV, disabled
  364. [ 0.130841] reg-fixed-voltage vcc5v0-usb-host-regulator: Looking up vin-supply from device tree
  365. [ 0.130890] vcc5v0_usb_host: supplied by vcc5v0_usb
  366. [ 0.130992] reg-fixed-voltage vcc5v0-usb-host-regulator: vcc5v0_usb_host supplying 5000000uV
  367. [ 0.131350] vcc5v0_usb_otg: 5000 mV, disabled
  368. [ 0.131567] reg-fixed-voltage vcc5v0-usb-otg-regulator: Looking up vin-supply from device tree
  369. [ 0.131617] vcc5v0_usb_otg: supplied by vcc5v0_usb
  370. [ 0.131704] reg-fixed-voltage vcc5v0-usb-otg-regulator: vcc5v0_usb_otg supplying 5000000uV
  371. [ 0.132290] iommu: Default domain type: Passthrough
  372. [ 0.132748] SCSI subsystem initialized
  373. [ 0.133127] libata version 3.00 loaded.
  374. [ 0.133466] usbcore: registered new interface driver usbfs
  375. [ 0.133560] usbcore: registered new interface driver hub
  376. [ 0.133632] usbcore: registered new device driver usb
  377. [ 0.134969] pps_core: LinuxPPS API ver. 1 registered
  378. [ 0.134993] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  379. [ 0.135039] PTP clock support registered
  380. [ 0.135110] EDAC MC: Ver: 3.0.0
  381. [ 0.136260] arm-scmi firmware:scmi: Enabled polling mode TX channel - prot_id:16
  382. [ 0.136547] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
  383. [ 0.136649] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
  384. [ 0.137722] Advanced Linux Sound Architecture Driver Initialized.
  385. [ 0.139233] vgaarb: loaded
  386. [ 0.139822] clocksource: Switched to clocksource arch_sys_counter
  387. [ 0.140727] pnp: PnP ACPI: disabled
  388. [ 0.156141] NET: Registered PF_INET protocol family
  389. [ 0.156634] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
  390. [ 0.159002] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
  391. [ 0.159069] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  392. [ 0.159112] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
  393. [ 0.159278] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
  394. [ 0.159947] TCP: Hash tables configured (established 16384 bind 16384)
  395. [ 0.160123] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
  396. [ 0.160196] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
  397. [ 0.160469] NET: Registered PF_UNIX/PF_LOCAL protocol family
  398. [ 0.161171] RPC: Registered named UNIX socket transport module.
  399. [ 0.161201] RPC: Registered udp transport module.
  400. [ 0.161219] RPC: Registered tcp transport module.
  401. [ 0.161236] RPC: Registered tcp NFSv4.1 backchannel transport module.
  402. [ 0.162258] PCI: CLS 0 bytes, default 64
  403. [ 0.163772] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available
  404. [ 0.164998] kvm [1]: IPA Size Limit: 40 bits
  405. [ 0.165058] kvm [1]: GICv3: no GICV resource entry
  406. [ 0.165081] kvm [1]: disabling GICv2 emulation
  407. [ 0.165121] kvm [1]: GIC system register CPU interface enabled
  408. e[ 0.165343] kvm [1]: vgic interrupt IRQ9
  409. [ 0.165608] kvm [1]: VHE mode initialized successfully
  410. [ 0.168699] Initialise system trusted keyrings
  411. [ 0.169095] workingset: timestamp_bits=42 max_order=19 bucket_order=0
  412. [ 0.182090] NFS: Registering the id_resolver key type
  413. [ 0.182170] Key type id_resolver registered
  414. [ 0.182193] Key type id_legacy registered
  415. [ 0.182347] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  416. [ 0.182377] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  417. [ 0.182791] ksmbd: The ksmbd server is experimental
  418. [ 0.234872] Key type asymmetric registered
  419. [ 0.234901] Asymmetric key parser 'x509' registered
  420. e[ 0.235002] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
  421. [ 0.235037] io scheduler mq-deadline registered
  422. [ 0.235059] io scheduler kyber registered
  423. [ 0.238607] phy phy-fe8a0000.usb2phy.0: Looking up phy-supply from device tree
  424. [ 0.238681] vcc5v0_usb_host: could not add device link phy-fe8a0000.usb2phy.0: -ENOENT
  425. [ 0.238979] phy phy-fe8a0000.usb2phy.1: Looking up phy-supply from device tree
  426. [ 0.239035] vcc5v0_usb_otg: could not add device link phy-fe8a0000.usb2phy.1: -ENOENT
  427. [ 0.241422] phy phy-fe8b0000.usb2phy.2: Looking up phy-supply from device tree
  428. [ 0.241470] phy phy-fe8b0000.usb2phy.2: Looking up phy-supply property in node /usb2phy@fe8b0000/host-port faid
  429. [ 0.241656] phy phy-fe8b0000.usb2phy.3: Looking up phy-supply from device tree
  430. [ 0.241694] phy phy-fe8b0000.usb2phy.3: Looking up phy-supply property in node /usb2phy@fe8b0000/otg-port faild
  431. [ 0.243530] phy phy-fe830000.phy.4: Looking up phy-supply from device tree
  432. [ 0.243571] phy phy-fe830000.phy.4: Looking up phy-supply property in node /phy@fe830000 failed
  433. [ 0.244299] phy phy-fe840000.phy.5: Looking up phy-supply from device tree
  434. [ 0.244337] phy phy-fe840000.phy.5: Looking up phy-supply property in node /phy@fe840000 failed
  435. [ 0.245193] phy phy-fe820000.phy.6: Looking up phy-supply from device tree
  436. [ 0.245229] phy phy-fe820000.phy.6: Looking up phy-supply property in node /phy@fe820000 failed
  437. [ 0.246570] phy phy-fe8c0000.phy.7: Looking up phy-supply from device tree
  438. [ 0.246625] vcc3v3_pcie: could not add device link phy-fe8c0000.phy.7: -ENOENT
  439. [ 0.251444] rockchip-dw-pcie 3c0400000.pcie: Looking up vpcie3v3-supply from device tree
  440. [ 0.516049] phy phy-fe8c0000.phy.7: lane number 0, val 1
  441. [ 0.516089] phy phy-fe8c0000.phy.7: lane number 1, val 2
  442. [ 0.516112] phy phy-fe8c0000.phy.7: bifurcation enabled
  443. [ 0.516297] rockchip-dw-pcie 3c0400000.pcie: host bridge /pcie@fe270000 ranges:
  444. [ 0.516361] rockchip-dw-pcie 3c0400000.pcie: Parsing ranges property...
  445. [ 0.516409] rockchip-dw-pcie 3c0400000.pcie: IO 0x037ef00000..0x037effffff -> 0x003ef00000
  446. [ 0.516464] rockchip-dw-pcie 3c0400000.pcie: MEM 0x0340000000..0x037eefffff -> 0x0000000000
  447. [ 0.528277] rockchip-dw-pcie 3c0400000.pcie: iATU unroll: enabled
  448. [ 0.528308] rockchip-dw-pcie 3c0400000.pcie: iATU regions: 8 ob, 8 ib, align 64K, limit 8G
  449. 8[ 1.636171] rockchip-dw-pcie 3c0400000.pcie: Phy link never came up
  450. [ 1.636482] rockchip-dw-pcie 3c0400000.pcie: PCI host bridge to bus 0001:00
  451. [ 1.636519] pci_bus 0001:00: root bus resource [bus 00-0f]
  452. [ 1.636548] pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] (bus address [0x3ef00000-0x3effffff])
  453. [ 1.636580] pci_bus 0001:00: root bus resource [mem 0x340000000-0x37eefffff] (bus address [0x00000000-0x3eefff)
  454. [ 1.636611] pci_bus 0001:00: scanning bus
  455. [ 1.636678] pci 0001:00:00.0: [1d87:3566] type 01 class 0x060400
  456. [ 1.636742] pci 0001:00:00.0: reg 0x38: [mem 0x340000000-0x34000ffff pref]
  457. [ 1.636893] pci 0001:00:00.0: supports D1 D2
  458. [ 1.636917] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
  459. [ 1.636945] pci 0001:00:00.0: PME# disabled
  460. [ 1.637251] pci 0001:00:00.0: vgaarb: pci_notify
  461. [ 1.642235] pci_bus 0001:00: fixups for bus
  462. [ 1.642273] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
  463. [ 1.642451] pci_bus 0001:01: busn_res: can not insert [bus 01-ff] under [bus 00-0f] (conflicts with (null) [bu)
  464. [ 1.642496] pci_bus 0001:01: scanning bus
  465. [ 1.642671] pci_bus 0001:01: fixups for bus
  466. [ 1.642695] pci_bus 0001:01: bus scan returning with max=01
  467. [ 1.642725] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
  468. [ 1.642759] pci_bus 0001:00: bus scan returning with max=ff
  469. [ 1.642803] pci 0001:00:00.0: BAR 6: assigned [mem 0x340000000-0x34000ffff pref]
  470. [ 1.642838] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
  471. [ 1.643516] rockchip-dw-pcie 3c0800000.pcie: Looking up vpcie3v3-supply from device tree
  472. [ 1.700152] rockchip-dw-pcie 3c0800000.pcie: host bridge /pcie@fe280000 ranges:
  473. [ 1.700216] rockchip-dw-pcie 3c0800000.pcie: Parsing ranges property...
  474. [ 1.700262] rockchip-dw-pcie 3c0800000.pcie: IO 0x03bef00000..0x03beffffff -> 0x003ef00000
  475. [ 1.700318] rockchip-dw-pcie 3c0800000.pcie: MEM 0x0380000000..0x03beefffff -> 0x0000000000
  476. [ 1.711847] rockchip-dw-pcie 3c0800000.pcie: iATU unroll: enabled
  477. [ 1.711878] rockchip-dw-pcie 3c0800000.pcie: iATU regions: 8 ob, 8 ib, align 64K, limit 8G
  478. [ 2.820148] rockchip-dw-pcie 3c0800000.pcie: Phy link never came up
  479. [ 2.820372] rockchip-dw-pcie 3c0800000.pcie: PCI host bridge to bus 0002:00
  480. [ 2.820407] pci_bus 0002:00: root bus resource [bus 00-0f]
  481. [ 2.820437] pci_bus 0002:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3ef00000-0x3effffff])
  482. [ 2.820468] pci_bus 0002:00: root bus resource [mem 0x380000000-0x3beefffff] (bus address [0x00000000-0x3eefff)
  483. [ 2.820499] pci_bus 0002:00: scanning bus
  484. [ 2.820563] pci 0002:00:00.0: [1d87:3566] type 01 class 0x060400
  485. [ 2.820612] pci 0002:00:00.0: reg 0x10: [mem 0x00000000-0x3fffffff]
  486. [ 2.820649] pci 0002:00:00.0: reg 0x14: [mem 0x00000000-0x3fffffff]
  487. [ 2.820683] pci 0002:00:00.0: reg 0x38: [mem 0x380000000-0x38000ffff pref]
  488. [ 2.820833] pci 0002:00:00.0: supports D1 D2
  489. [ 2.820856] pci 0002:00:00.0: PME# supported from D0 D1 D3hot
  490. [ 2.820884] pci 0002:00:00.0: PME# disabled
  491. [ 2.821183] pci 0002:00:00.0: vgaarb: pci_notify
  492. [ 2.826005] pci_bus 0002:00: fixups for bus
  493. [ 2.826045] pci 0002:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
  494. [ 2.826245] pci_bus 0002:01: busn_res: can not insert [bus 01-ff] under [bus 00-0f] (conflicts with (null) [bu)
  495. [ 2.826289] pci_bus 0002:01: scanning bus
  496. [ 2.826464] pci_bus 0002:01: fixups for bus
  497. [ 2.826486] pci_bus 0002:01: bus scan returning with max=01
  498. [ 2.826515] pci 0002:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
  499. [ 2.826547] pci_bus 0002:00: bus scan returning with max=ff
  500. [ 2.826590] pci 0002:00:00.0: BAR 0: no space for [mem size 0x40000000]
  501. [ 2.826618] pci 0002:00:00.0: BAR 0: failed to assign [mem size 0x40000000]
  502. [ 2.826647] pci 0002:00:00.0: BAR 1: no space for [mem size 0x40000000]
  503. [ 2.826671] pci 0002:00:00.0: BAR 1: failed to assign [mem size 0x40000000]
  504. [ 2.826698] pci 0002:00:00.0: BAR 6: assigned [mem 0x380000000-0x38000ffff pref]
  505. [ 2.826730] pci 0002:00:00.0: PCI bridge to [bus 01-ff]
  506. [ 2.828214] EINJ: ACPI disabled.
  507. [ 2.835695] dma-pl330 fe530000.dma-controller: Loaded driver for PL330 DMAC-241330
  508. [ 2.835750] dma-pl330 fe530000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
  509. [ 2.839138] dma-pl330 fe550000.dma-controller: Loaded driver for PL330 DMAC-241330
  510. [ 2.839179] dma-pl330 fe550000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
  511. [ 2.841946] arm-scmi firmware:scmi: Failed. SCMI protocol 22 not active.
  512. [ 2.848278] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  513. [ 2.852080] fe660000.serial: ttyS2 at MMIO 0xfe660000 (irq = 31, base_baud = 1500000) is a 16550A
  514. [ 3.035250] printk: console [ttyS2] enabled
  515. [ 3.042455] rockchip-vop2 fe040000.vop: Adding to iommu group 2
  516. [ 3.043053] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_A
  517. [ 3.049605] cacheinfo: Unable to detect cache hierarchy for CPU 0
  518. [ 3.063393] brd: module loaded
  519. [ 3.072946] loop: module loaded
  520. [ 3.074057] zram: Added device: zram0
  521. [ 3.076628] ahci-dwc fc800000.sata: Looking up ahci-supply from device tree
  522. [ 3.077288] ahci-dwc fc800000.sata: Looking up ahci-supply property in node /sata@fc800000 failed
  523. [ 3.078133] ahci-dwc fc800000.sata: supply ahci not found, using dummy regulator
  524. [ 3.079026] ahci-dwc fc800000.sata: Looking up phy-supply from device tree
  525. [ 3.079664] ahci-dwc fc800000.sata: Looking up phy-supply property in node /sata@fc800000 failed
  526. [ 3.080523] ahci-dwc fc800000.sata: supply phy not found, using dummy regulator
  527. [ 3.081399] ahci-dwc fc800000.sata: Looking up target-supply from device tree
  528. [ 3.082057] ahci-dwc fc800000.sata: Looking up target-supply property in node /sata@fc800000 failed
  529. [ 3.082901] ahci-dwc fc800000.sata: supply target not found, using dummy regulator
  530. [ 3.083745] ahci-dwc fc800000.sata: PMPn is limited up to 5 ports
  531. [ 3.084476] ahci-dwc fc800000.sata: forcing port_map 0x0 -> 0x1
  532. [ 3.085069] ahci-dwc fc800000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
  533. [ 3.085879] ahci-dwc fc800000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc apst
  534. [ 3.086718] ahci-dwc fc800000.sata: port 0 is not capable of FBS
  535. [ 3.088955] scsi host0: ahci-dwc
  536. [ 3.089706] ata1: SATA max UDMA/133 mmio [mem 0xfc800000-0xfc800fff] port 0x100 irq 35
  537. [ 3.094267] tun: Universal TUN/TAP device driver, 1.6
  538. [ 3.096528] rk_gmac-dwmac fe010000.ethernet: IRQ eth_lpi not found
  539. [ 3.097374] rk_gmac-dwmac fe010000.ethernet: Looking up phy-supply from device tree
  540. [ 3.098099] rk_gmac-dwmac fe010000.ethernet: Looking up phy-supply property in node /ethernet@fe010000 failed
  541. [ 3.099036] rk_gmac-dwmac fe010000.ethernet: supply phy not found, using dummy regulator
  542. [ 3.100026] rk_gmac-dwmac fe010000.ethernet: clock input or output? (output).
  543. [ 3.100684] rk_gmac-dwmac fe010000.ethernet: TX delay(0x3c).
  544. [ 3.101205] rk_gmac-dwmac fe010000.ethernet: RX delay(0x2f).
  545. [ 3.101734] rk_gmac-dwmac fe010000.ethernet: integrated PHY? (no).
  546. [ 3.107392] rk_gmac-dwmac fe010000.ethernet: init for RGMII
  547. [ 3.108273] rk_gmac-dwmac fe010000.ethernet: User ID: 0x30, Synopsys ID: 0x51
  548. [ 3.108934] rk_gmac-dwmac fe010000.ethernet: DWMAC4/5
  549. [ 3.109409] rk_gmac-dwmac fe010000.ethernet: DMA HW capability register supported
  550. [ 3.110088] rk_gmac-dwmac fe010000.ethernet: RX Checksum Offload Engine supported
  551. [ 3.110763] rk_gmac-dwmac fe010000.ethernet: TX Checksum insertion supported
  552. [ 3.111397] rk_gmac-dwmac fe010000.ethernet: Wake-Up On Lan supported
  553. [ 3.112100] rk_gmac-dwmac fe010000.ethernet: TSO supported
  554. [ 3.112608] rk_gmac-dwmac fe010000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  555. [ 3.113336] rk_gmac-dwmac fe010000.ethernet: Enabled RFS Flow TC (entries=10)
  556. [ 3.113983] rk_gmac-dwmac fe010000.ethernet: TSO feature enabled
  557. [ 3.114530] rk_gmac-dwmac fe010000.ethernet: Using 32/32 bits DMA host/device width
  558. [ 3.255853] rk_gmac-dwmac fe2a0000.ethernet: IRQ eth_lpi not found
  559. [ 3.256889] rk_gmac-dwmac fe2a0000.ethernet: Looking up phy-supply from device tree
  560. [ 3.257637] rk_gmac-dwmac fe2a0000.ethernet: Looking up phy-supply property in node /ethernet@fe2a0000 failed
  561. [ 3.258570] rk_gmac-dwmac fe2a0000.ethernet: supply phy not found, using dummy regulator
  562. [ 3.259491] rk_gmac-dwmac fe2a0000.ethernet: clock input or output? (input).
  563. [ 3.260180] rk_gmac-dwmac fe2a0000.ethernet: TX delay(0x4f).
  564. [ 3.260704] rk_gmac-dwmac fe2a0000.ethernet: RX delay(0xf).
  565. [ 3.261225] rk_gmac-dwmac fe2a0000.ethernet: integrated PHY? (no).
  566. [ 3.261860] rk_gmac-dwmac fe2a0000.ethernet: clock input from PHY
  567. [ 3.267431] rk_gmac-dwmac fe2a0000.ethernet: init for RGMII
  568. [ 3.268306] rk_gmac-dwmac fe2a0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
  569. [ 3.268967] rk_gmac-dwmac fe2a0000.ethernet: DWMAC4/5
  570. [ 3.269443] rk_gmac-dwmac fe2a0000.ethernet: DMA HW capability register supported
  571. [ 3.270122] rk_gmac-dwmac fe2a0000.ethernet: RX Checksum Offload Engine supported
  572. [ 3.270798] rk_gmac-dwmac fe2a0000.ethernet: TX Checksum insertion supported
  573. [ 3.271433] rk_gmac-dwmac fe2a0000.ethernet: Wake-Up On Lan supported
  574. [ 3.272140] rk_gmac-dwmac fe2a0000.ethernet: TSO supported
  575. [ 3.272650] rk_gmac-dwmac fe2a0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  576. [ 3.273376] rk_gmac-dwmac fe2a0000.ethernet: Enabled RFS Flow TC (entries=10)
  577. [ 3.274024] rk_gmac-dwmac fe2a0000.ethernet: TSO feature enabled
  578. [ 3.274570] rk_gmac-dwmac fe2a0000.ethernet: Using 32/32 bits DMA host/device width
  579. [ 3.402466] ata1: SATA link down (SStatus 0 SControl 300)
  580. [ 3.415198] VFIO - User Level meta-driver version: 0.3
  581. [ 3.427475] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  582. [ 3.428076] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  583. [ 3.428280] ehci-platform fd800000.usb: EHCI Host Controller
  584. [ 3.428302] ohci-platform fd840000.usb: Generic Platform OHCI controller
  585. [ 3.428335] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 2
  586. [ 3.428439] ehci-platform fd880000.usb: EHCI Host Controller
  587. [ 3.428471] ehci-platform fd880000.usb: new USB bus registered, assigned bus number 3
  588. [ 3.428553] ohci-platform fd840000.usb: irq 44, io mem 0xfd840000
  589. [ 3.428618] ohci-platform fd8c0000.usb: Generic Platform OHCI controller
  590. [ 3.428618] ehci-platform fd880000.usb: irq 43, io mem 0xfd880000
  591. [ 3.428648] ohci-platform fd8c0000.usb: new USB bus registered, assigned bus number 4
  592. [ 3.428795] ohci-platform fd8c0000.usb: irq 45, io mem 0xfd8c0000
  593. [ 3.428930] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
  594. [ 3.429012] xhci-hcd xhci-hcd.0.auto: irq 40, io mem 0xfcc00000
  595. [ 3.429286] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 5
  596. [ 3.429306] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  597. [ 3.429328] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
  598. [ 3.429350] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
  599. [ 3.430450] hub 1-0:1.0: USB hub found
  600. [ 3.430665] ehci-platform fd800000.usb: irq 42, io mem 0xfd800000
  601. [ 3.431077] hub 1-0:1.0: 1 port detected
  602. [ 3.440480] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
  603. [ 3.442110] hub 6-0:1.0: USB hub found
  604. n[ 3.442511] hub 6-0:1.0: 1 port detected
  605. [ 3.443684] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  606. [ 3.443866] ehci-platform fd880000.usb: USB 2.0 started, EHCI 1.00
  607. [ 3.444247] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
  608. [ 3.445615] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
  609. [ 3.445944] hub 3-0:1.0: USB hub found
  610. [ 3.446521] xhci-hcd xhci-hcd.1.auto: irq 41, io mem 0xfd000000
  611. [ 3.446864] hub 3-0:1.0: 1 port detected
  612. [ 3.447573] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  613. [ 3.448239] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
  614. [ 3.448949] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
  615. [ 3.450466] hub 7-0:1.0: USB hub found
  616. [ 3.450879] hub 7-0:1.0: 1 port detected
  617. [ 3.451884] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
  618. [ 3.453520] hub 8-0:1.0: USB hub found
  619. [ 3.453920] hub 8-0:1.0: 1 port detected
  620. [ 3.455012] usbcore: registered new interface driver usb-storage
  621. [ 3.456501] i2c_dev: i2c /dev entries driver
  622. [ 3.459867] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00
  623. [ 3.460841] rk808 0-0020: chip id: 0x8090
  624. [ 3.461477] hub 5-0:1.0: USB hub found
  625. [ 3.461891] hub 5-0:1.0: 1 port detected
  626. [ 3.492906] hub 4-0:1.0: USB hub found
  627. [ 3.493339] hub 4-0:1.0: 1 port detected
  628. [ 3.495200] hub 2-0:1.0: USB hub found
  629. [ 3.495607] hub 2-0:1.0: 1 port detected
  630. [ 3.539774] rk808-regulator rk808-regulator: there is no dvs0 gpio
  631. [ 3.540430] rk808-regulator rk808-regulator: there is no dvs1 gpio
  632. [ 3.541114] rk808 0-0020: Looking up vcc1-supply from device tree
  633. [ 3.541695] vdd_logic: supplied by vcc3v3_sys
  634. [ 3.542103] vcc3v3_sys: could not add device link regulator.12: -ENOENT
  635. [ 3.546554] vdd_logic: 500 <--> 1350 mV at 900 mV, enabled
  636. [ 3.547946] rk808 0-0020: Looking up vcc2-supply from device tree
  637. [ 3.548523] vdd_gpu: supplied by vcc3v3_sys
  638. [ 3.548914] vcc3v3_sys: could not add device link regulator.13: -ENOENT
  639. [ 3.553317] vdd_gpu: 500 <--> 1350 mV at 900 mV, enabled
  640. [ 3.554642] rk808 0-0020: Looking up vcc3-supply from device tree
  641. [ 3.555218] vcc_ddr: supplied by vcc3v3_sys
  642. [ 3.555610] vcc3v3_sys: could not add device link regulator.14: -ENOENT
  643. [ 3.559138] vcc_ddr: at 500 mV, enabled
  644. [ 3.563246] vdd_npu: 500 <--> 1350 mV at 500 mV, disabled
  645. [ 3.564503] rk808 0-0020: Looking up vcc4-supply from device tree
  646. [ 3.565078] vdd_npu: supplied by vcc3v3_sys
  647. [ 3.565638] rk808 0-0020: Looking up vcc9-supply from device tree
  648. [ 3.566211] vcc_1v8: supplied by vcc3v3_sys
  649. [ 3.566604] vcc3v3_sys: could not add device link regulator.16: -ENOENT
  650. [ 3.569571] vcc_1v8: 1800 mV, enabled
  651. [ 3.570723] rk808 0-0020: Looking up vcc5-supply from device tree
  652. [ 3.571298] vdda0v9_image: supplied by vcc3v3_sys
  653. [ 3.571735] vcc3v3_sys: could not add device link regulator.17: -ENOENT
  654. [ 3.572944] vdda0v9_image: Bringing 600000uV into 900000-900000uV
  655. [ 3.578165] vdda0v9_image: 900 mV, enabled
  656. [ 3.579342] rk808 0-0020: Looking up vcc5-supply from device tree
  657. [ 3.579955] vdda_0v9: supplied by vcc3v3_sys
  658. [ 3.580355] vcc3v3_sys: could not add device link regulator.18: -ENOENT
  659. [ 3.583874] vdda_0v9: 900 mV, enabled
  660. [ 3.585042] rk808 0-0020: Looking up vcc5-supply from device tree
  661. [ 3.585619] vdda0v9_pmu: supplied by vcc3v3_sys
  662. y[ 3.586041] vcc3v3_sys: could not add device link regulator.19: -ENOENT
  663. [ 3.590009] vdda0v9_pmu: 900 mV, enabled
  664. [ 3.591200] rk808 0-0020: Looking up vcc6-supply from device tree
  665. [ 3.591776] vccio_acodec: supplied by vcc3v3_sys
  666. [ 3.592244] vcc3v3_sys: could not add device link regulator.20: -ENOENT
  667. [ 3.595751] vccio_acodec: 3300 mV, enabled
  668. [ 3.598930] vccio_sd: 1800 <--> 3300 mV at 3300 mV, enabled
  669. [ 3.600160] rk808 0-0020: Looking up vcc6-supply from device tree
  670. [ 3.600735] vccio_sd: supplied by vcc3v3_sys
  671. [ 3.601310] rk808 0-0020: Looking up vcc6-supply from device tree
  672. [ 3.601883] vcc3v3_pmu: supplied by vcc3v3_sys
  673. [ 3.602297] vcc3v3_sys: could not add device link regulator.22: -ENOENT
  674. [ 3.606269] vcc3v3_pmu: 3300 mV, enabled
  675. [ 3.607480] rk808 0-0020: Looking up vcc7-supply from device tree
  676. [ 3.608091] vcca_1v8: supplied by vcc3v3_sys
  677. [ 3.608490] vcc3v3_sys: could not add device link regulator.23: -ENOENT
  678. [ 3.611985] vcca_1v8: 1800 mV, enabled
  679. [ 3.613160] rk808 0-0020: Looking up vcc7-supply from device tree
  680. [ 3.613733] vcca1v8_pmu: supplied by vcc3v3_sys
  681. [ 3.614156] vcc3v3_sys: could not add device link regulator.24: -ENOENT
  682. [ 3.618132] vcca1v8_pmu: 1800 mV, enabled
  683. [ 3.619332] rk808 0-0020: Looking up vcc7-supply from device tree
  684. [ 3.619940] vcca1v8_image: supplied by vcc3v3_sys
  685. [ 3.620380] vcc3v3_sys: could not add device link regulator.25: -ENOENT
  686. [ 3.621536] vcca1v8_image: Bringing 600000uV into 1800000-1800000uV
  687. [ 3.626738] vcca1v8_image: 1800 mV, enabled
  688. [ 3.628035] rk808 0-0020: Looking up vcc9-supply from device tree
  689. [ 3.628610] vcc_3v3: supplied by vcc3v3_sys
  690. [ 3.629002] vcc3v3_sys: could not add device link regulator.26: -ENOENT
  691. [ 3.631480] vcc_3v3: at 3300 mV, enabled
  692. [ 3.632220] rk808 0-0020: Looking up vcc8-supply from device tree
  693. [ 3.632795] vcc3v3_sd: supplied by vcc3v3_sys
  694. [ 3.633203] vcc3v3_sys: could not add device link regulator.27: -ENOENT
  695. [ 3.635690] vcc3v3_sd: at 3300 mV, enabled
  696. [ 3.642751] input: rk805 pwrkey as /devices/platform/fdd40000.i2c/i2c-0/0-0020/rk805-pwrkey/input/input0
  697. [ 3.656196] rk808-rtc rk808-rtc: registered as rtc0
  698. [ 3.659403] rk808-rtc rk808-rtc: setting system clock to 2017-08-05T09:00:10 UTC (1501923610)
  699. [ 3.668249] rtc-hym8563 3-0051: no valid clock/calendar values available
  700. [ 3.669143] rtc-hym8563 3-0051: registered as rtc1
  701. [ 3.670459] ir_imon_decoder: IR iMON protocol handler initialized
  702. [ 3.671025] IR JVC protocol handler initialized
  703. [ 3.671446] IR MCE Keyboard/mouse protocol handler initialized
  704. [ 3.672020] IR NEC protocol handler initialized
  705. [ 3.672437] IR RC5(x/sz) protocol handler initialized
  706. [ 3.672897] IR RC6 protocol handler initialized
  707. [ 3.673311] IR RCMM protocol handler initialized
  708. [ 3.673733] IR SANYO protocol handler initialized
  709. [ 3.674161] IR Sharp protocol handler initialized
  710. [ 3.674591] IR Sony protocol handler initialized
  711. [ 3.675015] IR XMP protocol handler initialized
  712. [ 3.676238] Registered IR keymap rc-empty
  713. [ 3.676718] rc rc0: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0
  714. [ 3.677575] rc rc0: lirc_dev: driver gpio_ir_recv registered at minor = 0, raw IR receiver, no transmitter
  715. [ 3.678632] input: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0/input1
  716. [ 3.681219] arm-scmi firmware:scmi: Failed. SCMI protocol 21 not active.
  717. [ 3.690913] arm-scmi firmware:scmi: Failed. SCMI protocol 19 not active.
  718. [ 3.692723] sdhci: Secure Digital Host Controller Interface driver
  719. [ 3.693283] sdhci: Copyright(c) Pierre Ossman
  720. [ 3.693974] Synopsys Designware Multimedia Card Interface Driver
  721. [ 3.694840] sdhci-pltfm: SDHCI platform and OF driver helper
  722. [ 3.695606] dwmmc_rockchip fe2b0000.mmc: IDMAC supports 32-bit address mode.
  723. [ 3.696291] sdhci-dwcmshc fe310000.mmc: Looking up vmmc-supply from device tree
  724. [ 3.696301] dwmmc_rockchip fe2b0000.mmc: Using internal DMA controller.
  725. [ 3.696942] sdhci-dwcmshc fe310000.mmc: Looking up vmmc-supply property in node /mmc@fe310000 failed
  726. [ 3.697150] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
  727. [ 3.697213] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
  728. [ 3.697505] usbcore: registered new interface driver usbhid
  729. [ 3.697509] usbhid: USB HID core driver
  730. [ 3.697517] dwmmc_rockchip fe2b0000.mmc: Version ID is 270a
  731. [ 3.697965] SPI driver st-accel-spi has no spi_device_id for st,lis302dl-spi
  732. [ 3.697969] SPI driver st-accel-spi has no spi_device_id for st,lis3lv02dl-accel
  733. [ 3.697973] SPI driver st-accel-spi has no spi_device_id for st,lis3dh-accel
  734. [ 3.697976] SPI driver st-accel-spi has no spi_device_id for st,lsm330d-accel
  735. [ 3.697979] SPI driver st-accel-spi has no spi_device_id for st,lsm330dl-accel
  736. [ 3.697982] SPI driver st-accel-spi has no spi_device_id for st,lsm330dlc-accel
  737. [ 3.697985] SPI driver st-accel-spi has no spi_device_id for st,lis331dlh-accel
  738. [ 3.697987] SPI driver st-accel-spi has no spi_device_id for st,lsm330-accel
  739. [ 3.697990] SPI driver st-accel-spi has no spi_device_id for st,lsm303agr-accel
  740. [ 3.697993] SPI driver st-accel-spi has no spi_device_id for st,lis2dh12-accel
  741. [ 3.697996] SPI driver st-accel-spi has no spi_device_id for st,lng2dm-accel
  742. [ 3.697998] SPI driver st-accel-spi has no spi_device_id for st,h3lis331dl-accel
  743. [ 3.698001] SPI driver st-accel-spi has no spi_device_id for st,lis331dl-accel
  744. [ 3.698344] sdhci-dwcmshc fe310000.mmc: Looking up vqmmc-supply from device tree
  745. [ 3.698378] rockchip-saradc fe720000.saradc: Looking up vref-supply from device tree
  746. [ 3.698922] dwmmc_rockchip fe2b0000.mmc: DW MMC controller at irq 77,32 bit host data width,256 deep fifo
  747. [ 3.699455] sdhci-dwcmshc fe310000.mmc: Looking up vqmmc-supply property in node /mmc@fe310000 failed
  748. [ 3.700023] dwmmc_rockchip fe2b0000.mmc: Looking up vmmc-supply from device tree
  749. [ 3.700369] sdhci-dwcmshc fe310000.mmc: Disabling HS200/HS400, frequency too low (50000000)
  750. [ 3.701422] dwmmc_rockchip fe2b0000.mmc: Looking up vqmmc-supply from device tree
  751. [ 3.705703] NET: Registered PF_INET6 protocol family
  752. [ 3.706153] dwmmc_rockchip fe2b0000.mmc: Got CD GPIO
  753. [ 3.707500] Segment Routing with IPv6
  754. [ 3.715474] In-situ OAM (IOAM) with IPv6
  755. [ 3.715882] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  756. [ 3.716783] NET: Registered PF_PACKET protocol family
  757. [ 3.717509] Key type dns_resolver registered
  758. [ 3.718228] registered taskstats version 1
  759. [ 3.718602] Loading compiled-in X.509 certificates
  760. [ 3.721437] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
  761. [ 3.723677] zswap: loaded using pool zstd/zsmalloc
  762. [ 3.731895] mmc1: SDHCI controller on fe310000.mmc [fe310000.mmc] using ADMA
  763. [ 3.758074] rockchip-iodomain fdc20000.syscon:io-domains: Looking up pmuio1-supply from device tree
  764. [ 3.760001] rockchip-iodomain fdc20000.syscon:io-domains: Looking up pmuio2-supply from device tree
  765. [ 3.761783] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio1-supply from device tree
  766. [ 3.763633] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio2-supply from device tree
  767. [ 3.764571] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio2-supply property in node /syscon@fdd
  768. [ 3.765681] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio3-supply from device tree
  769. [ 3.767063] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio4-supply from device tree
  770. [ 3.768497] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio5-supply from device tree
  771. [ 3.769811] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio6-supply from device tree
  772. [ 3.771629] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio7-supply from device tree
  773. [ 3.773147] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
  774. [ 3.773999] rockchip-drm display-subsystem: bound fe040000.vop (ops vop2_component_ops)
  775. [ 3.774114] dwhdmi-rockchip fe0a0000.hdmi: Looking up avdd-0v9-supply from device tree
  776. [ 3.774783] mmc0: new high speed SDHC card at address b368
  777. [ 3.776397] dwhdmi-rockchip fe0a0000.hdmi: Looking up avdd-1v8-supply from device tree
  778. [ 3.776900] mmcblk0: mmc0:b368 LEXAR 14.9 GiB
  779. [ 3.778210] dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
  780. [ 3.779831] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bus driver
  781. [ 3.781896] rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops dw_hdmi_rockchip_ops)
  782. [ 3.783192] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
  783. [ 3.784115] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
  784. [ 3.784937] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
  785. [ 3.786598] panfrost fde60000.gpu: clock rate = 594000000
  786. [ 3.787145] GPT:Primary header thinks Alt. header is not at the end of the disk.
  787. [ 3.787824] GPT:14335999 != 31275007
  788. [ 3.787891] panfrost fde60000.gpu: bus_clock rate = 500000000
  789. [ 3.788141] GPT:Alternate GPT header not at the end of the disk.
  790. [ 3.788686] panfrost fde60000.gpu: Looking up mali-supply from device tree
  791. [ 3.789165] GPT:14335999 != 31275007
  792. [ 3.790109] GPT: Use GNU Parted to correct GPT errors.
  793. [ 3.790595] mmcblk0: p1 p2 p3
  794. [ 3.794482] panfrost fde60000.gpu: mali-g52 id 0x7402 major 0x1 minor 0x0 status 0x0
  795. [ 3.795189] panfrost fde60000.gpu: features: 00000000,00000cf7, issues: 00000000,00000400
  796. [ 3.795966] panfrost fde60000.gpu: Features: L2:0x07110206 Shader:0x00000002 Tiler:0x00000209 Mem:0x1 MMU:0x007
  797. [ 3.797009] panfrost fde60000.gpu: shader_present=0x1 l2_present=0x1
  798. [ 3.798874] [drm] Initialized panfrost 1.2.0 20180908 for fde60000.gpu on minor 1
  799. [ 3.808457] mmc1: new high speed MMC card at address 0001
  800. [ 3.809552] mmcblk1: mmc1:0001 SPeMMC 14.6 GiB
  801. [ 3.811797] mmcblk1boot0: mmc1:0001 SPeMMC 4.00 MiB
  802. [ 3.813446] mmcblk1boot1: mmc1:0001 SPeMMC 4.00 MiB
  803. [ 3.814872] mmcblk1rpmb: mmc1:0001 SPeMMC 4.00 MiB, chardev (241:0)
  804. [ 3.857489] mt7530 stmmac-0:00: no interrupt support
  805. [ 3.879965] mt7530 stmmac-0:00: configuring for fixed/rgmii link mode
  806. [ 3.883193] mt7530 stmmac-0:00: Link is Up - 1Gbps/Full - flow control rx/tx
  807. [ 3.926366] mt7530 stmmac-0:00 lan0 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7531 PHY] (irq=POLL)
  808. [ 3.976989] mt7530 stmmac-0:00 lan1 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7531 PHY] (irq=POLL)
  809. [ 4.027515] mt7530 stmmac-0:00 lan2 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7531 PHY] (irq=POLL)
  810. [ 4.078308] mt7530 stmmac-0:00 lan3 (uninitialized): PHY [mt7530-0:04] driver [MediaTek MT7531 PHY] (irq=POLL)
  811. [ 4.083982] DSA: tree 0 setup
  812. [ 4.130821] input: Analog Headphones as /devices/platform/rk809-sound/sound/card1/input2
  813. [ 4.133571] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  814. [ 4.135739] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  815. [ 4.137064] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  816. [ 4.137848] cfg80211: failed to load regulatory.db
  817. [ 4.139637] ALSA device list:
  818. [ 4.139929] #0: HDMI
  819. [ 4.140144] #1: Analog
  820. [ 4.140584] dw-apb-uart fe660000.serial: forbid DMA for kernel console
  821. [ 4.154336] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: disabled.
  822. [ 4.155202] VFS: Mounted root (ext4 filesystem) readonly on device 179:3.
  823. [ 4.156774] devtmpfs: mounted
  824. [ 4.162821] Freeing unused kernel memory: 5312K
  825. [ 4.171907] Run /sbin/init as init process
  826. [ 4.172284] with arguments:
  827. [ 4.172553] /sbin/init
  828. [ 4.172799] with environment:
  829. [ 4.173082] HOME=/
  830. [ 4.173297] TERM=linux
  831. [ 4.173540] board=bpi-r2pro
  832. [ 4.873677] systemd[1]: System time before build time, advancing clock.
  833. [ 4.961106] systemd[1]: systemd 252.6-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SE)
  834. [ 4.964181] systemd[1]: Detected architecture arm64.
  835.  
  836. Welcome to Debian GNU/Linux 12 (bookworm)!
  837.  
  838. [ 4.986344] systemd[1]: Hostname set to <bpi-r2pro>.
  839. [ 5.667653] systemd[1]: Queued start job for default target graphical.target.
  840. [ 5.695532] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
  841. [ OK ] Created slice system-getty.slice - Slice /system/getty.
  842. [ 5.709885] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
  843. [ OK ] Created slice system-modpr…lice - Slice /system/modprobe.
  844. [ 5.722931] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
  845. [ OK ] Created slice system-seria… - Slice /system/serial-getty.
  846. [ 5.737620] systemd[1]: Created slice user.slice - User and Session Slice.
  847. [ OK ] Created slice user.slice - User and Session Slice.
  848. [ 5.748612] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Dire.
  849. [ OK ] Started systemd-ask-passwo…quests to Console Directory Watch.
  850. [ 5.760582] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory W.
  851. [ OK ] Started systemd-ask-passwo… Requests to Wall Directory Watch.
  852. [ 5.772437] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Auto.
  853. [ 5.774601] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
  854. [ OK ] Reached target cryptsetup.…get - Local Encrypted Volumes.
  855. [ 5.788467] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
  856. [ OK ] Reached target integrityse…Local Integrity Protected Volumes.
  857. [ 5.800426] systemd[1]: Reached target paths.target - Path Units.
  858. [ OK ] Reached target paths.target - Path Units.
  859. [ 5.812387] systemd[1]: Reached target remote-fs.target - Remote File Systems.
  860. [ OK ] Reached target remote-fs.target - Remote File Systems.
  861. [ 5.824377] systemd[1]: Reached target slices.target - Slice Units.
  862. [ OK ] Reached target slices.target - Slice Units.
  863. [ 5.836488] systemd[1]: Reached target swap.target - Swaps.
  864. [ OK ] Reached target swap.target - Swaps.
  865. [ 5.838541] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
  866. [ OK ] Reached target veritysetup… - Local Verity Protected Volumes.
  867. [ 5.853345] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
  868. [ OK ] Listening on systemd-initc… initctl Compatibility Named Pipe.
  869. [ 5.866689] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
  870. [ OK ] Listening on systemd-journ…socket - Journal Audit Socket.
  871. [ 5.882385] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
  872. [ OK ] Listening on systemd-journ…t - Journal Socket (/dev/log).
  873. [ 5.898466] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
  874. [ OK ] Listening on systemd-journald.socket - Journal Socket.
  875. [ 5.914544] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
  876. [ OK ] Listening on systemd-netwo… - Network Service Netlink Socket.
  877. [ 5.932378] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
  878. [ OK ] Listening on systemd-udevd….socket - udev Control Socket.
  879. [ 5.946069] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
  880. [ OK ] Listening on systemd-udevd…l.socket - udev Kernel Socket.
  881. [ 5.996418] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
  882. Mounting dev-hugepages.mount - Huge Pages File System...
  883. [ 6.013046] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
  884. Mounting dev-mqueue.mountPOSIX Message Queue File System...
  885. [ 6.028163] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
  886. Mounting sys-kernel-debug.… - Kernel Debug File System...
  887. [ 6.044239] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
  888. Mounting sys-kernel-tracin… - Kernel Trace File System...
  889. [ 6.056323] systemd[1]: kmod-static-nodes.service - Create List of Static Device Nodes was skipped because of .
  890. [ 6.062148] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
  891. Starting modprobe@configfs…m - Load Kernel Module configfs...
  892. [ 6.077030] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
  893. Starting modprobe@dm_mod.s…[0m - Load Kernel Module dm_mod...
  894. [ 6.096309] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
  895. Starting modprobe@drm.service - Load Kernel Module drm...
  896. [ 6.112685] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
  897. Starting modprobe@efi_psto…- Load Kernel Module efi_pstore...
  898. [ 6.129063] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
  899. Starting modprobe@fuse.ser…e - Load Kernel Module fuse...
  900. [ 6.144187] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
  901. Starting modprobe@loop.ser…e - Load Kernel Module loop...
  902. [ 6.156840] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does no.
  903. [ 6.158009] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
  904. [ 6.162985] systemd[1]: Starting systemd-journald.service - Journal Service...
  905. Starting systemd-journald.service - Journal Service...
  906. [ 6.183359] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
  907. Starting systemd-modules-l…rvice - Load Kernel Modules...
  908. [ 6.200803] systemd[1]: Starting systemd-network-generator.service - Generate network units from Kernel comman.
  909. Starting systemd-network-g… units from Kernel command line...
  910. [ 6.216863] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
  911. Starting systemd-remount-f…nt Root and Kernel File Systems...
  912. [ 6.232678] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
  913. Starting systemd-udev-trig…[0m - Coldplug All udev Devices...
  914. [ 6.252386] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
  915. [ OK ] Mounted dev-hugepages.mount - Huge Pages File System.
  916. [ 6.264669] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
  917. [ OK ] Mounted dev-mqueue.mount- POSIX Message Queue File System.
  918. [ 6.267200] EXT4-fs (mmcblk0p3): re-mounted. Quota mode: disabled.
  919. [ 6.278963] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
  920. [ OK ] Mounted sys-kernel-debug.m…nt - Kernel Debug File System.
  921. [ 6.292665] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
  922. [ OK ] Mounted sys-kernel-tracing…nt - Kernel Trace File System.
  923. [ 6.309189] systemd[1]: modprobe@configfs.service: Deactivated successfully.
  924. [ 6.310661] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
  925. [ OK ] Finished modprobe@configfs…[0m - Load Kernel Module configfs.
  926. [ 6.325865] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
  927. [ 6.327161] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
  928. [ OK ] Finished modprobe@dm_mod.s…e - Load Kernel Module dm_mod.
  929. [ 6.345680] systemd[1]: modprobe@drm.service: Deactivated successfully.
  930. [ 6.347000] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
  931. [ OK ] Finished modprobe@drm.service - Load Kernel Module drm.
  932. [ 6.365402] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
  933. [ 6.366769] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
  934. [ OK ] Finished modprobe@efi_psto…m - Load Kernel Module efi_pstore.
  935. [ 6.381404] systemd[1]: modprobe@fuse.service: Deactivated successfully.
  936. [ 6.382720] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
  937. [ OK ] Finished modprobe@fuse.service - Load Kernel Module fuse.
  938. [ 6.397423] systemd[1]: modprobe@loop.service: Deactivated successfully.
  939. [ 6.398748] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
  940. [ OK ] Finished modprobe@loop.service - Load Kernel Module loop.
  941. [ 6.413452] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
  942. [ OK ] Finished systemd-modules-l…service - Load Kernel Modules.
  943. [ 6.425334] systemd[1]: Finished systemd-network-generator.service - Generate network units from Kernel comman.
  944. [ OK ] Finished systemd-network-g…rk units from Kernel command line.
  945. [ 6.437254] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
  946. [ OK ] Finished systemd-remount-f…ount Root and Kernel File Systems.
  947. [ 6.449631] systemd[1]: Reached target network-pre.target - Preparation for Network.
  948. [ OK ] Reached target network-pre…get - Preparation for Network.
  949. [ 6.460560] systemd[1]: sys-fs-fuse-connections.mount - FUSE Control File System was skipped because of an unm.
  950. [ 6.462336] systemd[1]: sys-kernel-config.mount - Kernel Configuration File System was skipped because of an u.
  951. [ 6.464132] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet conditio.
  952. [ 6.465533] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of a.
  953. [ 6.500525] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed...
  954. Starting systemd-random-se…ice - Load/Save Random Seed...
  955. [ 6.512342] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger conditio.
  956. [ 6.517778] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
  957. Starting systemd-sysctl.se…ce - Apply Kernel Variables...
  958. [ 6.525066] systemd[1]: Starting systemd-sysusers.service - Create System Users...
  959. Starting systemd-sysusers.…rvice - Create System Users...
  960. [ 6.542052] systemd[1]: Started systemd-journald.service - Journal Service.
  961. [ OK ] Started systemd-journald.service - Journal Service.
  962. Starting systemd-journal-f…h Journal to Persistent Storage...
  963. [ OK ] Finished systemd-sysctl.service - Apply Kernel Variables.
  964. [ OK ] Finished systemd-sysusers.service - Create System Users.
  965. [ 6.590216] systemd-journald[203]: Received client request to flush runtime journal.
  966. Starting systemd-tmpfiles-…ate Static Device Nodes in /dev...
  967. [ OK ] Finished systemd-udev-trig…e - Coldplug All udev Devices.
  968. Starting ifupdown-pre.serv…ynchronize boot up for ifupdown...
  969. [ OK ] Finished ifupdown-pre.serv… synchronize boot up for ifupdown.
  970. [ OK ] Finished systemd-tmpfiles-…reate Static Device Nodes in /dev.
  971. [ OK ] Reached target local-fs-pr…reparation for Local File Systems.
  972. Starting systemd-udevd.ser…ger for Device Events and Files...
  973. [ OK ] Finished systemd-journal-f…ush Journal to Persistent Storage.
  974. [ OK ] Started systemd-udevd.serv…nager for Device Events and Files.
  975. Starting systemd-networkd.…ice - Network Configuration...
  976. [ OK ] Found device dev-ttyS2.device - /dev/ttyS2.
  977. [ 8.644479] rk_gmac-dwmac fe010000.ethernet wan: renamed from eth0
  978. [ OK ] Found device dev-mmcblk0p2.device - /dev/mmcblk0p2.
  979. [ 8.939741] lanbr0: port 1(lan3) entered blocking state
  980. [ 8.940261] lanbr0: port 1(lan3) entered disabled state
  981. [ 8.947722] device lan3 entered promiscuous mode
  982. [ 8.948199] device eth1 entered promiscuous mode
  983. [ 8.950857] lanbr0: port 2(lan2) entered blocking state
  984. [ 8.951358] lanbr0: port 2(lan2) entered disabled state
  985. [ 8.956730] device lan2 entered promiscuous mode
  986. [ 8.962165] lanbr0: port 3(lan1) entered blocking state
  987. [ 8.962667] lanbr0: port 3(lan1) entered disabled state
  988. Mounting boot.mount - /boot...
  989. [ 8.969501] device lan1 entered promiscuous mode
  990. [ 8.974410] lanbr0: port 4(lan0) entered blocking state
  991. [ 8.974914] lanbr0: port 4(lan0) entered disabled state
  992. [ OK ] Started systemd-networkd.service - Network Configuration.
  993. [ OK ] Mounted boot.mount - /boot.
  994. [ 9.014298] device lan0 entered promiscuous mode
  995. [ OK ] Reached target local-fs.target - Local File Systems.
  996. [ 9.033046] rk_gmac-dwmac fe2a0000.ethernet eth1: Register MEM_TYPE_PAGE_POOL RxQ-0
  997. [ 9.034246] dwmac4: Master AXI performs any burst length
  998. [ 9.034754] rk_gmac-dwmac fe2a0000.ethernet eth1: No Safety Features support found
  999. [ 9.035457] rk_gmac-dwmac fe2a0000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
  1000. [ 9.039595] rk_gmac-dwmac fe2a0000.ethernet eth1: registered PTP clock
  1001. Starting networking.service - Raise network interfaces...
  1002. [ 9.075932] rk_gmac-dwmac fe2a0000.ethernet eth1: configuring for fixed/rgmii link mode
  1003. [ 9.077079] rk_gmac-dwmac fe2a0000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx
  1004. [ 9.078702] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
  1005. Starting systemd-tmpfiles-… Volatile Files and Directories...
  1006. [ 9.085930] mt7530 stmmac-0:00 lan3: configuring for phy/gmii link mode
  1007. [ 9.093239] mt7530 stmmac-0:00 lan2: configuring for phy/gmii link mode
  1008. [ 9.103249] mt7530 stmmac-0:00 lan1: configuring for phy/gmii link mode
  1009. [ 9.113716] mt7530 stmmac-0:00 lan0: configuring for phy/gmii link mode
  1010. [ OK ] Finished systemd-tmpfiles-…te Volatile Files and Directories.
  1011. Starting systemd-resolved.…e - Network Name Resolution...
  1012. Starting systemd-update-ut…rd System Boot/Shutdown in UTMP...
  1013. [ OK ] Reached target sound.target - Sound Card.
  1014. [ OK ] Finished systemd-update-ut…cord System Boot/Shutdown in UTMP.
  1015. [ OK ] Finished networking.service - Raise network interfaces.
  1016. [ OK ] Listening on systemd-rfkil…l Switch Status /dev/rfkill Watch.
  1017. [ 9.492604] rk_gmac-dwmac fe010000.ethernet wan: Register MEM_TYPE_PAGE_POOL RxQ-0
  1018. [ 9.494330] rk_gmac-dwmac fe010000.ethernet wan: PHY [stmmac-1:00] driver [Generic PHY] (irq=POLL)
  1019. [ 9.495156] dwmac4: Master AXI performs any burst length
  1020. [ 9.495641] rk_gmac-dwmac fe010000.ethernet wan: No Safety Features support found
  1021. [ 9.496365] rk_gmac-dwmac fe010000.ethernet wan: IEEE 1588-2008 Advanced Timestamp supported
  1022. [ 9.500066] rk_gmac-dwmac fe010000.ethernet wan: registered PTP clock
  1023. [ 9.501428] rk_gmac-dwmac fe010000.ethernet wan: configuring for phy/rgmii link mode
  1024. [ 10.367824] random: crng init done
  1025. [ OK ] Finished systemd-random-se…rvice - Load/Save Random Seed.
  1026. [ OK ] Started systemd-resolved.s…ice - Network Name Resolution.
  1027. [ OK ] Reached target network.target - Network.
  1028. [ OK ] Reached target nss-lookup.…m - Host and Network Name Lookups.
  1029. [ OK ] Reached target sysinit.target - System Initialization.
  1030. [ OK ] Started apt-daily.timer - Daily apt download activities.
  1031. [ OK ] Started apt-daily-upgrade.… apt upgrade and clean activities.
  1032. [ OK ] Started dpkg-db-backup.tim… Daily dpkg database backup timer.
  1033. [ OK ] Started e2scrub_all.timeretadata Check for All Filesystems.
  1034. [ OK ] Started fstrim.timer - Discard unused blocks once a week.
  1035. [ OK ] Started logrotate.timer - Daily rotation of log files.
  1036. [ OK ] Started systemd-tmpfiles-c… Cleanup of Temporary Directories.
  1037. [ OK ] Reached target timers.target - Timer Units.
  1038. [ OK ] Listening on dbus.socket- D-Bus System Message Bus Socket.
  1039. [ OK ] Reached target sockets.target - Socket Units.
  1040. [ OK ] Reached target basic.target - Basic System.
  1041. [ OK ] Started cron.service -…kground program processing daemon.
  1042. Starting dbus.service - D-Bus System Message Bus...
  1043. Starting e2scrub_reap.serv…e ext4 Metadata Check Snapshots...
  1044. Starting rc-local.service - /etc/rc.local...
  1045. Starting ssh.service - OpenBSD Secure Shell server...
  1046. Starting systemd-logind.se…ice - User Login Management...
  1047. Starting systemd-user-sess…vice - Permit User Sessions...
  1048. [ OK ] Started rc-local.service - /etc/rc.local.
  1049. [ OK ] Finished systemd-user-sess…ervice - Permit User Sessions.
  1050. [ OK ] Started getty@tty1.service - Getty on tty1.
  1051. [ OK ] Started serial-getty@ttyS2…rvice - Serial Getty on ttyS2.
  1052. [ OK ] Reached target getty.target - Login Prompts.
  1053. [ OK ] Started dbus.service - D-Bus System Message Bus.
  1054. [ OK ] Started systemd-logind.service - User Login Management.
  1055. [ OK ] Started ssh.service - OpenBSD Secure Shell server.
  1056. [ 13.605100] rk_gmac-dwmac fe010000.ethernet wan: Link is Up - 1Gbps/Full - flow control rx/tx
  1057. [ 13.606028] IPv6: ADDRCONF(NETDEV_CHANGE): wan: link becomes ready
  1058.  
  1059. Debian GNU/Linux 12 bpi-r2pro ttyS2
  1060.  
  1061. bpi-r2pro login: root
  1062. Password:
  1063. Linux bpi-r2pro 6.1.34-bpi-r2pro-main #5 SMP PREEMPT Thu Jun 29 15:35:08 UTC 2023 aarch64
  1064.  
  1065. The programs included with the Debian GNU/Linux system are free software;
  1066. the exact distribution terms for each program are described in the
  1067. individual files in /usr/share/doc/*/copyright.
  1068.  
  1069. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
  1070. permitted by applicable law.
  1071. root@bpi-r2pro:~# ip a
  1072. 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
  1073. link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
  1074. inet 127.0.0.1/8 scope host lo
  1075. valid_lft forever preferred_lft forever
  1076. inet6 ::1/128 scope host
  1077. valid_lft forever preferred_lft forever
  1078. 2: wan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
  1079. link/ether 76:95:00:96:b3:89 brd ff:ff:ff:ff:ff:ff
  1080. altname end1
  1081. inet 192.168.0.104/24 metric 1024 brd 192.168.0.255 scope global dynamic wan
  1082. valid_lft 172775sec preferred_lft 172775sec
  1083. inet6 fe80::7495:ff:fe96:b389/64 scope link
  1084. valid_lft forever preferred_lft forever
  1085. 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1504 qdisc mq state UP group default qlen 1000
  1086. link/ether 76:95:00:96:b3:88 brd ff:ff:ff:ff:ff:ff
  1087. altname end0
  1088. 4: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1000
  1089. link/sit 0.0.0.0 brd 0.0.0.0
  1090. 5: lan0@eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue master lanbr0 state LOWERLAYERDOWN group0
  1091. link/ether 76:95:00:96:b3:88 brd ff:ff:ff:ff:ff:ff
  1092. 6: lan1@eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue master lanbr0 state LOWERLAYERDOWN group0
  1093. link/ether 76:95:00:96:b3:88 brd ff:ff:ff:ff:ff:ff
  1094. 7: lan2@eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue master lanbr0 state LOWERLAYERDOWN group0
  1095. link/ether 76:95:00:96:b3:88 brd ff:ff:ff:ff:ff:ff
  1096. 8: lan3@eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue master lanbr0 state LOWERLAYERDOWN group0
  1097. link/ether 76:95:00:96:b3:88 brd ff:ff:ff:ff:ff:ff
  1098. 9: lanbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
  1099. link/ether ba:5a:10:d0:0d:fe brd ff:ff:ff:ff:ff:ff
  1100. inet 192.168.1.1/24 brd 192.168.1.255 scope global lanbr0
  1101. valid_lft forever preferred_lft forever
  1102. root@bpi-r2pro:~# ping 192.168.0.10
  1103. PING 192.168.0.10 (192.168.0.10) 56(84) bytes of data.
  1104. 64 bytes from 192.168.0.10: icmp_seq=1 ttl=64 time=0.892 ms
  1105. 64 bytes from 192.168.0.10: icmp_seq=2 ttl=64 time=0.771 ms
  1106. 64 bytes from 192.168.0.10: icmp_seq=3 ttl=64 time=0.824 ms
  1107. ^C
  1108. --- 192.168.0.10 ping statistics ---
  1109. 3 packets transmitted, 3 received, 0% packet loss, time 2034ms
  1110. rtt min/avg/max/mdev = 0.771/0.829/0.892/0.049 ms
  1111. root@bpi-r2pro:~#
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!