Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ------------------------- LIBDEBUG LOG -------------------------
- [1;35m<warn> [0m[app] SmartctlParser::parse_section_info_property(): Unknown property "Form Factor"
- [1;35m<warn> [0m[hz] Warning: exit: Device open failed, or device did not return an IDENTIFY DEVICE structure.
- [1;35m<warn> [0m[hz] Warning: exit: Command line did not parse.
- [1;35m<warn> [0m[app] execute_smartctl(): Smartctl binary did not execute cleanly.
- [1;35m<warn> [0m[app] StorageDevice::execute_device_smartctl(): Smartctl binary did not execute cleanly.
- [1;35m<warn> [0m[hz] Warning: exit: Device open failed, or device did not return an IDENTIFY DEVICE structure.
- [1;35m<warn> [0m[hz] Warning: exit: Device open failed, or device did not return an IDENTIFY DEVICE structure.
- [1;35m<warn> [0m[app] SmartctlParser::parse_full(): No ATA sections could be parsed. Returning.
- [1;35m<warn> [0m[app] SmartctlParser::parse_section_info_property(): Unknown property "Form Factor"
- [1;35m<warn> [0m[app] SmartctlParser::parse_section_info_property(): Unknown property "Form Factor"
- [1;35m<warn> [0m[app] SmartctlParser::parse_section_info_property(): Unknown property "Form Factor"
- ------------------------- EXECUTION LOG -------------------------
- ------------------------- EXECUTED COMMAND 1 -------------------------
- ---------------Command---------------
- 'smartctl'
- ---------------Parameters---------------
- -V
- ---------------STDOUT---------------
- smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.34-1-MANJARO] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- smartctl comes with ABSOLUTELY NO WARRANTY. This is free
- software, and you are welcome to redistribute it under
- the terms of the GNU General Public License; either
- version 2, or (at your option) any later version.
- See http://www.gnu.org for further details.
- smartmontools release 6.5 dated 2016-05-07 at 11:17:46 UTC
- smartmontools SVN rev 4318 dated 2016-05-07 at 11:18:20
- smartmontools build host: x86_64-unknown-linux-gnu
- smartmontools build with: C++14, GCC 6.1.1 20160501
- smartmontools configure arguments: '--prefix=/usr' '--sbindir=/usr/bin' '--sysconfdir=/etc' '--with-drivedbdir' '--with-libcap-ng=yes' '--with-systemdsystemunitdir=/usr/lib/systemd/system' '--with-smartdscriptdir=/usr/share/smartmontools' '--with-smartdplugindir=/usr/share/smartmontools/smartd_warning.d' 'CXXFLAGS=-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong' 'LDFLAGS=-Wl,-O1,--sort-common,--as-needed,-z,relro' 'CPPFLAGS=-D_FORTIFY_SOURCE=2' 'CFLAGS=-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong'
- ---------------STDERR---------------
- ---------------Error Message---------------
- ------------------------- EXECUTED COMMAND 2 -------------------------
- ---------------Command---------------
- 'smartctl'
- ---------------Parameters---------------
- -i -H -c '/dev/sda'
- ---------------STDOUT---------------
- smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.34-1-MANJARO] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Hitachi/HGST Travelstar Z5K500
- Device Model: HGST HTS545050A7E680
- Serial Number: RBF50AM52USXDP
- LU WWN Device Id: 5 000cca 7a3e7e610
- Firmware Version: GR2OA350
- User Capacity: 500,107,862,016 bytes [500 GB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5400 rpm
- Form Factor: 2.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Fri Jul 21 19:42:26 2017 UTC
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 45) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 117) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- ---------------STDERR---------------
- ---------------Error Message---------------
- ------------------------- EXECUTED COMMAND 3 -------------------------
- ---------------Command---------------
- 'smartctl'
- ---------------Parameters---------------
- -i -H -c '/dev/sr0'
- ---------------STDOUT---------------
- smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.34-1-MANJARO] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Vendor: hp
- Product: DVDRW GUB0N
- Revision: UB00
- >> Terminate command early due to bad response to IEC mode page
- A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
- ---------------STDERR---------------
- ---------------Error Message---------------
- ------------------------- EXECUTED COMMAND 4 -------------------------
- ---------------Command---------------
- 'smartctl'
- ---------------Parameters---------------
- -i -H -c '/dev/sdb'
- ---------------STDOUT---------------
- smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.34-1-MANJARO] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- /dev/sdb: Unknown USB bridge [0x0951:0x1653 (0x100)]
- Please specify device type with the -d option.
- Use smartctl -h to get a usage summary
- ---------------STDERR---------------
- ---------------Error Message---------------
- Command line did not parse.
- ------------------------- EXECUTED COMMAND 5 -------------------------
- ---------------Command---------------
- 'smartctl'
- ---------------Parameters---------------
- -d scsi -i -H -c '/dev/sdb'
- ---------------STDOUT---------------
- smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.34-1-MANJARO] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Vendor: Kingston
- Product: DT 100 G2
- Revision: PMAP
- User Capacity: 31,440,961,536 bytes [31.4 GB]
- Logical block size: 512 bytes
- scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0
- scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0
- >> Terminate command early due to bad response to IEC mode page
- A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
- ---------------STDERR---------------
- ---------------Error Message---------------
- ------------------------- EXECUTED COMMAND 6 -------------------------
- ---------------Command---------------
- 'smartctl'
- ---------------Parameters---------------
- -d cciss,0 -i -H -c '/dev/sg1'
- ---------------STDOUT---------------
- smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.34-1-MANJARO] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- Smartctl open device: /dev/sg1 [cciss_disk_00] [SCSI/SAT] failed: INQUIRY [SAT]: No such device or address
- ---------------STDERR---------------
- CCISS ioctl error 3 (fd -1 CDBLen 12 buf_size 16392)
- ---------------Error Message---------------
- ------------------------- EXECUTED COMMAND 7 -------------------------
- ---------------Command---------------
- 'smartctl'
- ---------------Parameters---------------
- -o on '/dev/sda'
- ---------------STDOUT---------------
- smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.34-1-MANJARO] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF ENABLE/DISABLE COMMANDS SECTION ===
- SMART Automatic Offline Testing Enabled every four hours.
- ---------------STDERR---------------
- ---------------Error Message---------------
- ------------------------- EXECUTED COMMAND 8 -------------------------
- ---------------Command---------------
- 'smartctl'
- ---------------Parameters---------------
- -i -H -c '/dev/sda'
- ---------------STDOUT---------------
- smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.34-1-MANJARO] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Hitachi/HGST Travelstar Z5K500
- Device Model: HGST HTS545050A7E680
- Serial Number: RBF50AM52USXDP
- LU WWN Device Id: 5 000cca 7a3e7e610
- Firmware Version: GR2OA350
- User Capacity: 500,107,862,016 bytes [500 GB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5400 rpm
- Form Factor: 2.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Fri Jul 21 19:42:51 2017 UTC
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x80) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 45) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 117) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- ---------------STDERR---------------
- ---------------Error Message---------------
- ------------------------- EXECUTED COMMAND 9 -------------------------
- ---------------Command---------------
- 'smartctl'
- ---------------Parameters---------------
- -o off '/dev/sda'
- ---------------STDOUT---------------
- smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.34-1-MANJARO] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF ENABLE/DISABLE COMMANDS SECTION ===
- SMART Automatic Offline Testing Disabled.
- ---------------STDERR---------------
- ---------------Error Message---------------
- ------------------------- EXECUTED COMMAND 10 -------------------------
- ---------------Command---------------
- 'smartctl'
- ---------------Parameters---------------
- -i -H -c '/dev/sda'
- ---------------STDOUT---------------
- smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.34-1-MANJARO] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Hitachi/HGST Travelstar Z5K500
- Device Model: HGST HTS545050A7E680
- Serial Number: RBF50AM52USXDP
- LU WWN Device Id: 5 000cca 7a3e7e610
- Firmware Version: GR2OA350
- User Capacity: 500,107,862,016 bytes [500 GB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5400 rpm
- Form Factor: 2.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Fri Jul 21 19:42:52 2017 UTC
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 45) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 117) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- ---------------STDERR---------------
- ---------------Error Message---------------
- ------------------------- EXECUTED COMMAND 11 -------------------------
- ---------------Command---------------
- 'smartctl'
- ---------------Parameters---------------
- -H -i -c -A -l error -l selftest -l selective '/dev/sda'
- ---------------STDOUT---------------
- smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.34-1-MANJARO] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Hitachi/HGST Travelstar Z5K500
- Device Model: HGST HTS545050A7E680
- Serial Number: RBF50AM52USXDP
- LU WWN Device Id: 5 000cca 7a3e7e610
- Firmware Version: GR2OA350
- User Capacity: 500,107,862,016 bytes [500 GB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5400 rpm
- Form Factor: 2.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Fri Jul 21 19:42:55 2017 UTC
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 45) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 117) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x002f 100 100 062 Pre-fail Always - 0
- 2 Throughput_Performance 0x0025 100 100 040 Pre-fail Offline - 0
- 3 Spin_Up_Time 0x0023 214 100 033 Pre-fail Always - 1
- 4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 3885
- 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x002f 100 100 067 Pre-fail Always - 0
- 8 Seek_Time_Performance 0x0025 100 100 040 Pre-fail Offline - 0
- 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 1974
- 10 Spin_Retry_Count 0x0033 100 100 060 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 2325
- 183 Runtime_Bad_Block 0x0032 100 100 001 Old_age Always - 0
- 184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
- 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 2752512
- 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
- 190 Airflow_Temperature_Cel 0x0022 067 055 045 Old_age Always - 33 (Min/Max 27/33)
- 191 G-Sense_Error_Rate 0x0032 097 097 000 Old_age Always - 949
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 9437328
- 193 Load_Cycle_Count 0x0032 091 091 000 Old_age Always - 91317
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 0
- 223 Load_Retry_Count 0x002a 100 100 000 Old_age Always - 0
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 1283 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- ---------------STDERR---------------
- ---------------Error Message---------------
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement