Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- pi@raspberrypi ~ $ dmesg
- [ 0.000000] Booting Linux on physical CPU 0xf00
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 4.1.19-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #858 SMP Tue Mar 15 15:56:00 GMT 2016
- [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine model: Raspberry Pi 2 Model B Rev 1.1
- [ 0.000000] cma: Reserved 8 MiB at 0x3a400000
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] On node 0 totalpages: 241664
- [ 0.000000] free_area_init_node: node 0, pgdat 80880fc0, node_mem_map b9bb4000
- [ 0.000000] Normal zone: 2124 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 241664 pages, LIFO batch:31
- [ 0.000000] [bcm2709_smp_init_cpus] enter (9420->f3003010)
- [ 0.000000] [bcm2709_smp_init_cpus] ncores=4
- [ 0.000000] PERCPU: Embedded 12 pages/cpu @bafb1000 s20416 r8192 d20544 u49152
- [ 0.000000] pcpu-alloc: s20416 r8192 d20544 u49152 alloc=12*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 239540
- [ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1872 bcm2708_fb.fbheight=1168 bcm2709.boardrev=0xa01041 bcm2709.serial=0x21e9c9d2 smsc95xx.macaddr=B8:27:EB:E9:C9:D2 bcm2708_fb.fbswap=1 bcm2709.uart_clock=3000000 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p6 rootfstype=ext4 elevator=deadline rootwait
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Memory: 939380K/966656K available (6064K kernel code, 534K rwdata, 1664K rodata, 444K init, 757K bss, 19084K reserved, 8192K cma-reserved)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- [ 0.000000] vmalloc : 0xbb800000 - 0xff000000 (1080 MB)
- [ 0.000000] lowmem : 0x80000000 - 0xbb000000 ( 944 MB)
- [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
- [ 0.000000] .text : 0x80008000 - 0x807945f0 (7730 kB)
- [ 0.000000] .init : 0x80795000 - 0x80804000 ( 444 kB)
- [ 0.000000] .data : 0x80804000 - 0x80889b10 ( 535 kB)
- [ 0.000000] .bss : 0x8088c000 - 0x809497dc ( 758 kB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] Additional per-CPU info printed with stalls.
- [ 0.000000] NR_IRQS:608
- [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
- [ 0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
- [ 0.000010] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
- [ 0.000033] Switching to timer-based delay loop, resolution 52ns
- [ 0.000314] Console: colour dummy device 80x30
- [ 0.001554] console [tty1] enabled
- [ 0.001613] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
- [ 0.001689] pid_max: default: 32768 minimum: 301
- [ 0.002075] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.002128] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.003416] Initializing cgroup subsys blkio
- [ 0.003488] Initializing cgroup subsys memory
- [ 0.003546] Initializing cgroup subsys devices
- [ 0.003597] Initializing cgroup subsys freezer
- [ 0.003662] Initializing cgroup subsys net_cls
- [ 0.003759] CPU: Testing write buffer coherency: ok
- [ 0.003868] ftrace: allocating 20313 entries in 60 pages
- [ 0.053047] CPU0: update cpu_capacity 1024
- [ 0.053123] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
- [ 0.053162] [bcm2709_smp_prepare_cpus] enter
- [ 0.053318] Setting up static identity map for 0x8240 - 0x8274
- [ 0.055832] [bcm2709_boot_secondary] cpu:1 started (0) 18
- [ 0.056271] [bcm2709_secondary_init] enter cpu:1
- [ 0.056328] CPU1: update cpu_capacity 1024
- [ 0.056337] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
- [ 0.056927] [bcm2709_boot_secondary] cpu:2 started (0) 18
- [ 0.057286] [bcm2709_secondary_init] enter cpu:2
- [ 0.057319] CPU2: update cpu_capacity 1024
- [ 0.057327] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
- [ 0.057874] [bcm2709_boot_secondary] cpu:3 started (0) 18
- [ 0.058131] [bcm2709_secondary_init] enter cpu:3
- [ 0.058160] CPU3: update cpu_capacity 1024
- [ 0.058168] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
- [ 0.058259] Brought up 4 CPUs
- [ 0.058370] SMP: Total of 4 processors activated (153.60 BogoMIPS).
- [ 0.058403] CPU: All CPU(s) started in HYP mode.
- [ 0.058433] CPU: Virtualization extensions available.
- [ 0.059464] devtmpfs: initialized
- [ 0.083115] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
- [ 0.083470] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.084656] pinctrl core: initialized pinctrl subsystem
- [ 0.085470] NET: Registered protocol family 16
- [ 0.091117] DMA: preallocated 4096 KiB pool for atomic coherent allocations
- [ 0.092282] bcm2709.uart_clock = 3000000
- [ 0.097680] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.097741] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.097966] Serial: AMBA PL011 UART driver
- [ 0.098170] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev2
- [ 0.597743] console [ttyAMA0] enabled
- [ 0.602009] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
- [ 0.678329] bcm2708-dmaengine 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0xf35
- [ 0.687064] bcm2708-dmaengine 3f007000.dma: Initialized 7 DMA channels (+ 1 legacy)
- [ 0.695458] bcm2708-dmaengine 3f007000.dma: Load BCM2835 DMA engine driver
- [ 0.702373] bcm2708-dmaengine 3f007000.dma: dma_debug:0
- [ 0.708330] SCSI subsystem initialized
- [ 0.712341] usbcore: registered new interface driver usbfs
- [ 0.717971] usbcore: registered new interface driver hub
- [ 0.723441] usbcore: registered new device driver usb
- [ 0.729219] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-03-15 14:47
- [ 0.764724] Switched to clocksource arch_sys_counter
- [ 0.818627] FS-Cache: Loaded
- [ 0.821896] CacheFiles: Loaded
- [ 0.836234] NET: Registered protocol family 2
- [ 0.841893] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.849136] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.855803] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.862305] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.868325] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.875178] NET: Registered protocol family 1
- [ 0.879973] RPC: Registered named UNIX socket transport module.
- [ 0.885953] RPC: Registered udp transport module.
- [ 0.890672] RPC: Registered tcp transport module.
- [ 0.895408] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.903064] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
- [ 0.912639] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.934976] VFS: Disk quotas dquot_6.6.0
- [ 0.939312] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.948813] FS-Cache: Netfs 'nfs' registered for caching
- [ 0.955323] NFS: Registering the id_resolver key type
- [ 0.960458] Key type id_resolver registered
- [ 0.964655] Key type id_legacy registered
- [ 0.971506] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 0.979174] io scheduler noop registered
- [ 0.983129] io scheduler deadline registered (default)
- [ 0.988654] io scheduler cfq registered
- [ 0.995137] BCM2708FB: allocated DMA memory fa800000
- [ 1.000156] BCM2708FB: allocated DMA channel 0 @ f3007000
- [ 1.041099] Console: switching to colour frame buffer device 234x73
- [ 1.069552] Serial: 8250/16550 driver, 0 ports, IRQ sharing disabled
- [ 1.077369] vc-cma: Videocore CMA driver
- [ 1.081376] vc-cma: vc_cma_base = 0x00000000
- [ 1.086188] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
- [ 1.091678] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
- [ 1.097434] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
- [ 1.121841] brd: module loaded
- [ 1.134010] loop: module loaded
- [ 1.138392] vchiq: vchiq_init_state: slot_zero = 0xba880000, is_master = 0
- [ 1.147398] Loading iSCSI transport class v2.0-870.
- [ 1.153369] usbcore: registered new interface driver smsc95xx
- [ 1.159364] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
- [ 1.365644] Core Release: 2.80a
- [ 1.368860] Setting default values for core params
- [ 1.373770] Finished setting default values for core params
- [ 1.579901] Using Buffer DMA mode
- [ 1.583284] Periodic Transfer Interrupt Enhancement - disabled
- [ 1.589235] Multiprocessor Interrupt Enhancement - disabled
- [ 1.594925] OTG VER PARAM: 0, OTG VER FLAG: 0
- [ 1.599364] Dedicated Tx FIFOs mode
- [ 1.603286] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xba814000 dma = 0xfa814000 len=9024
- [ 1.613340] FIQ FSM acceleration enabled for :
- [ 1.613340] Non-periodic Split Transactions
- [ 1.613340] Periodic Split Transactions
- [ 1.613340] High-Speed Isochronous Endpoints
- [ 1.630318] dwc_otg: Microframe scheduler enabled
- [ 1.630396] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x80417288
- [ 1.636425] WARN::hcd_init_fiq:413: FIQ ASM at 0x804175f8 length 36
- [ 1.642801] WARN::hcd_init_fiq:438: MPHI regs_base at 0xbb89a000
- [ 1.648942] dwc_otg 3f980000.usb: DWC OTG Controller
- [ 1.654035] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
- [ 1.661527] dwc_otg 3f980000.usb: irq 32, io mem 0x00000000
- [ 1.667264] Init: Port Power? op_state=1
- [ 1.671256] Init: Power Port (0)
- [ 1.674878] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.681788] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.689160] usb usb1: Product: DWC OTG Controller
- [ 1.693951] usb usb1: Manufacturer: Linux 4.1.19-v7+ dwc_otg_hcd
- [ 1.700083] usb usb1: SerialNumber: 3f980000.usb
- [ 1.711501] hub 1-0:1.0: USB hub found
- [ 1.721225] hub 1-0:1.0: 1 port detected
- [ 1.731499] dwc_otg: FIQ enabled
- [ 1.731512] dwc_otg: NAK holdoff enabled
- [ 1.731522] dwc_otg: FIQ split-transaction FSM enabled
- [ 1.731564] Module dwc_common_port init
- [ 1.731977] usbcore: registered new interface driver usb-storage
- [ 1.744166] mousedev: PS/2 mouse device common for all mice
- [ 1.756428] bcm2835-cpufreq: min=600000 max=900000
- [ 1.767361] sdhci: Secure Digital Host Controller Interface driver
- [ 1.779359] sdhci: Copyright(c) Pierre Ossman
- [ 1.789868] sdhost: log_buf @ ba813000 (fa813000)
- [ 1.874767] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
- [ 1.906659] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 1.918775] ledtrig-cpu: registered to indicate activity on CPUs
- [ 1.924873] Indeed it is in host mode hprt0 = 00021501
- [ 1.941940] hidraw: raw HID events driver (C) Jiri Kosina
- [ 1.953518] usbcore: registered new interface driver usbhid
- [ 1.964899] usbhid: USB HID core driver
- [ 1.975023] Initializing XFRM netlink socket
- [ 1.984168] mmc0: host does not support reading read-only switch, assuming write-enable
- [ 1.987549] mmc0: new high speed SDHC card at address e624
- [ 1.988222] mmcblk0: mmc0:e624 SL08G 7.40 GiB
- [ 1.990908] mmcblk0: p1 p2 < p5 p6 > p3
- [ 2.030007] NET: Registered protocol family 17
- [ 2.040430] Key type dns_resolver registered
- [ 2.050839] Registering SWP/SWPB emulation handler
- [ 2.062275] registered taskstats version 1
- [ 2.072332] vc-sm: Videocore shared memory driver
- [ 2.082740] [vc_sm_connected_init]: start
- [ 2.093152] [vc_sm_connected_init]: end - returning 0
- [ 2.104798] usb 1-1: new high-speed USB device number 2 using dwc_otg
- [ 2.117296] Indeed it is in host mode hprt0 = 00001101
- [ 2.119850] EXT4-fs (mmcblk0p6): INFO: recovery required on readonly filesystem
- [ 2.119858] EXT4-fs (mmcblk0p6): write access will be enabled during recovery
- [ 2.322810] EXT4-fs (mmcblk0p6): orphan cleanup on readonly fs
- [ 2.335156] EXT4-fs (mmcblk0p6): 1 orphan inode deleted
- [ 2.346279] EXT4-fs (mmcblk0p6): recovery complete
- [ 2.357081] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
- [ 2.369677] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.383573] hub 1-1:1.0: USB hub found
- [ 2.393285] hub 1-1:1.0: 5 ports detected
- [ 2.444353] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
- [ 2.458326] VFS: Mounted root (ext4 filesystem) readonly on device 179:6.
- [ 2.479459] devtmpfs: mounted
- [ 2.489051] Freeing unused kernel memory: 444K (80795000 - 80804000)
- [ 2.674822] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
- [ 2.785178] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
- [ 2.798109] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.814467] smsc95xx v1.0.4
- [ 2.889170] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:e9:c9:d2
- [ 2.984839] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
- [ 3.095665] usb 1-1.2: New USB device found, idVendor=1a40, idProduct=0101
- [ 3.108779] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 3.123915] usb 1-1.2: Product: USB 2.0 Hub
- [ 3.135745] hub 1-1.2:1.0: USB hub found
- [ 3.146185] hub 1-1.2:1.0: 4 ports detected
- [ 3.434815] usb 1-1.2.1: new high-speed USB device number 5 using dwc_otg
- [ 3.538815] udevd[173]: starting version 175
- [ 3.565791] usb 1-1.2.1: New USB device found, idVendor=1a40, idProduct=0101
- [ 3.579257] usb 1-1.2.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 3.593551] usb 1-1.2.1: Product: USB 2.0 Hub
- [ 3.606199] hub 1-1.2.1:1.0: USB hub found
- [ 3.617415] hub 1-1.2.1:1.0: 4 ports detected
- [ 3.904873] usb 1-1.2.1.1: new low-speed USB device number 6 using dwc_otg
- [ 4.044172] usb 1-1.2.1.1: New USB device found, idVendor=046d, idProduct=c31d
- [ 4.061362] usb 1-1.2.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 4.079024] usb 1-1.2.1.1: Product: USB Keyboard
- [ 4.079054] usb 1-1.2.1.1: Manufacturer: Logitech
- [ 4.792648] bcm2835-rng 3f104000.rng: hwrng registered
- [ 4.806125] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
- [ 4.806439] input: Logitech USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1.1/1-1.2.1.1:1.0/0003:046D:C31D.0001/input/input0
- [ 4.865478] hid-generic 0003:046D:C31D.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-3f980000.usb-1.2.1.1/input0
- [ 4.907026] input: Logitech USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1.1/1-1.2.1.1:1.1/0003:046D:C31D.0002/input/input1
- [ 4.985178] hid-generic 0003:046D:C31D.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-3f980000.usb-1.2.1.1/input1
- [ 5.104774] usb 1-1.2.1.2: new low-speed USB device number 7 using dwc_otg
- [ 5.250653] usb 1-1.2.1.2: New USB device found, idVendor=05ac, idProduct=0304
- [ 5.265138] usb 1-1.2.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 5.279987] usb 1-1.2.1.2: Product: Apple Optical USB Mouse
- [ 5.292715] usb 1-1.2.1.2: Manufacturer: Mitsumi Electric
- [ 5.404764] usb 1-1.2.1.3: new high-speed USB device number 8 using dwc_otg
- [ 5.537056] usb 1-1.2.1.3: New USB device found, idVendor=0bc2, idProduct=0501
- [ 5.551485] usb 1-1.2.1.3: New USB device strings: Mfr=56, Product=64, SerialNumber=81
- [ 5.566607] usb 1-1.2.1.3: Product: USB Mass Storage
- [ 5.578716] usb 1-1.2.1.3: Manufacturer: Seagate
- [ 5.590428] usb 1-1.2.1.3: SerialNumber: CBA987737327
- [ 5.605637] usb-storage 1-1.2.1.3:1.0: USB Mass Storage device detected
- [ 5.620519] scsi host0: usb-storage 1-1.2.1.3:1.0
- [ 5.724779] usb 1-1.2.1.4: new full-speed USB device number 9 using dwc_otg
- [ 5.879740] usb 1-1.2.1.4: New USB device found, idVendor=045e, idProduct=028e
- [ 5.894343] usb 1-1.2.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 5.909240] usb 1-1.2.1.4: Product: Controller
- [ 5.920890] usb 1-1.2.1.4: Manufacturer: \xffffffc2\xffffffa9\xffffffa9Microsoft Corporation
- [ 5.934120] usb 1-1.2.1.4: SerialNumber: 03B250D
- [ 6.025313] input: Microsoft X-Box 360 pad as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1.4/1-1.2.1.4:1.0/input/input2
- [ 6.046569] usbcore: registered new interface driver xpad
- [ 6.056142] input: Mitsumi Electric Apple Optical USB Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1.2/1-1.2.1.2:1.0/0003:05AC:0304.0003/input/input3
- [ 6.056957] apple 0003:05AC:0304.0003: input,hidraw2: USB HID v1.10 Mouse [Mitsumi Electric Apple Optical USB Mouse] on usb-3f980000.usb-1.2.1.2/input0
- [ 6.628394] scsi 0:0:0:0: Direct-Access ST910082 4A 0000 PQ: 0 ANSI: 0
- [ 6.650823] sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.2 GiB)
- [ 6.670943] sd 0:0:0:0: [sda] Write Protect is off
- [ 6.684837] sd 0:0:0:0: [sda] Mode Sense: 27 00 00 00
- [ 6.685970] sd 0:0:0:0: [sda] No Caching mode page found
- [ 6.699782] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 6.706921] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 6.970384] sda: sda1 sda2
- [ 6.991237] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 7.176114] random: nonblocking pool is initialized
- [ 7.720675] EXT4-fs (mmcblk0p6): re-mounted. Opts: (null)
- [ 7.971588] EXT4-fs (mmcblk0p6): re-mounted. Opts: (null)
- [ 12.917928] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
- [ 16.427390] cfg80211: Calling CRDA to update world regulatory domain
- [ 16.861986] Adding 102396k swap on /var/swap. Priority:-1 extents:1 across:102396k SSFS
- [ 17.345994] uart-pl011 3f201000.uart: no DMA platform data
- [ 19.584792] cfg80211: Calling CRDA to update world regulatory domain
- [ 22.680790] EXT4-fs (sda2): recovery complete
- [ 22.682048] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
- [ 22.744886] cfg80211: Calling CRDA to update world regulatory domain
- [ 22.813348] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
- [ 22.934145] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
- [ 25.904781] cfg80211: Calling CRDA to update world regulatory domain
- [ 29.064818] cfg80211: Calling CRDA to update world regulatory domain
- [ 32.224805] cfg80211: Calling CRDA to update world regulatory domain
- [ 35.384807] cfg80211: Calling CRDA to update world regulatory domain
- [ 38.544811] cfg80211: Calling CRDA to update world regulatory domain
- [ 41.704786] cfg80211: Calling CRDA to update world regulatory domain
- [ 44.864810] cfg80211: Calling CRDA to update world regulatory domain
- [ 48.024798] cfg80211: Calling CRDA to update world regulatory domain
- [ 51.184814] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
- [ 251.533123] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
- pi@raspberrypi ~ $
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement