kfvik

Linux version 4.19.10-tinycore (tc@box) (gcc version 8.2.0 (GCC)) #1999 SMP Tue Dec 18 13:36:47 UTC 2018
x86/fpu: x87 FPU will use FXSAVE
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009b7ff] usable
BIOS-e820: [mem 0x000000000009b800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000d2000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000037e9ffff] usable
BIOS-e820: [mem 0x0000000037ea0000-0x0000000037eacfff] ACPI data
BIOS-e820: [mem 0x0000000037ead000-0x0000000037efffff] ACPI NVS
BIOS-e820: [mem 0x0000000037f00000-0x000000003fffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
SMBIOS 2.3 present.
DMI: Acer Aspire 5040/Aspire 5040, BIOS V1.05      04/21/2006
tsc: Fast TSC calibration using PIT
tsc: Detected 1800.090 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x37ea0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-D3FFF write-protect
  D4000-DBFFF uncachable
  DC000-DFFFF write-protect
  E0000-E3FFF uncachable
  E4000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask FFC0000000 write-back
  1 base 0038000000 mask FFF8000000 uncachable
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
found SMP MP-table at [mem 0x000f6d40-0x000f6d4f] mapped at [(ptrval)]
initial memory mapped: [mem 0x00000000-0x00bfffff]
Base memory trampoline at [(ptrval)] 97000 size 16384
BRK [0x00937000, 0x00937fff] PGTABLE
RAMDISK: [mem 0x375ea000-0x37e9ffff]
Allocated new RAMDISK: [mem 0x36748000-0x36ffd607]
Move RAMDISK from [mem 0x375ea000-0x37e9f607] to [mem 0x36748000-0x36ffd607]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F6D00 000014 (v00 PTLTD )
ACPI: RSDT 0x0000000037EA7350 000034 (v01 PTLTD    RSDT   06040000  LTP 00000000)
ACPI: FACP 0x0000000037EACE20 000074 (v01 ATI    Piranha  06040000 ATI  000F4240)
ACPI: DSDT 0x0000000037EA7384 005A9C (v01 ATI    SB400    06040000 MSFT 0100000E)
ACPI: FACS 0x0000000037EADFC0 000040
ACPI: SSDT 0x0000000037EACE94 0000D6 (v01 PTLTD  POWERNOW 06040000  LTP 00000001)
ACPI: APIC 0x0000000037EACF6A 00005A (v01 PTLTD  ? APIC   06040000  LTP 00000000)
ACPI: MCFG 0x0000000037EACFC4 00003C (v01 PTLTD    MCFG   06040000  LTP 00000000)
ACPI: Local APIC address 0xfee00000
14MB HIGHMEM available.
879MB LOWMEM available.
  mapped low ram: 0 - 36ffe000
  low ram: 0 - 36ffe000
BRK [0x00938000, 0x00938fff] PGTABLE
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  Normal   [mem 0x0000000001000000-0x0000000036ffdfff]
  HighMem  [mem 0x0000000036ffe000-0x0000000037e9ffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009afff]
  node   0: [mem 0x0000000000100000-0x0000000037e9ffff]
Initmem setup node 0 [mem 0x0000000000001000-0x0000000037e9ffff]
On node 0 totalpages: 228922
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3994 pages, LIFO batch:0
  Normal zone: 1728 pages used for memmap
  Normal zone: 221182 pages, LIFO batch:63
  HighMem zone: 3746 pages, LIFO batch:0
Using APIC driver default
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 1 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff]
PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
PM: Registered nosave memory: [mem 0x000d2000-0x000fffff]
[mem 0x40000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
percpu: Embedded 28 pages/cpu @(ptrval) s84812 r0 d29876 u114688
pcpu-alloc: s84812 r0 d29876 u114688 alloc=28*4096
pcpu-alloc: [0] 0
Built 1 zonelists, mobility grouping on.  Total pages: 227162
Kernel command line: BOOT_IMAGE=/tce/boot/vmlinuz quiet  waitusb=5:UUID="5491ee6c-34e0-4092-8678-0e81b837c297" tce=UUID="5491ee6c-34e0-4092-8678-0e81b837c297"  initrd=/tce/boot/core.gz
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
BRK [0x00939000, 0x00939fff] PGTABLE
Initializing CPU#0
Initializing HighMem for node 0 (00036ffe:00037ea0)
Initializing Movable for node 0 (00000000:00000000)
Memory: 890200K/915688K available (5401K kernel code, 419K rwdata, 1380K rodata, 656K init, 464K bss, 25488K reserved, 0K cma-reserved, 14984K highmem)
virtual kernel memory layout:
    fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
  cpu_entry : 0xff800000 - 0xff939000   (1252 kB)
    pkmap   : 0xff000000 - 0xff400000   (4096 kB)
    vmalloc : 0xf77fe000 - 0xfeffe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf6ffe000   ( 879 MB)
      .init : 0xc0816000 - 0xc08ba000   ( 656 kB)
      .data : 0xc0646490 - 0xc080bf80   (1814 kB)
      .text : 0xc0100000 - 0xc0646490   (5401 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
rcu: Hierarchical RCU implementation.
rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
NR_IRQS: 2304, nr_irqs: 256, preallocated irqs: 16
CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
Console: colour VGA+ 80x25
console [tty0] enabled
ACPI: Core revision 20180810
APIC: Switch to symmetric I/O mode setup
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f27e7774c, max_idle_ns: 440795211701 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 3601.18 BogoMIPS (lpj=6000300)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
mce: CPU supports 5 MCE banks
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
Spectre V2 : Spectre mitigation: LFENCE not serializing, switching to generic retpoline
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Freeing SMP alternatives memory: 20K
smpboot: CPU0: AMD Turion(tm) 64 Mobile Technology ML-34 (family: 0xf, model: 0x24, stepping: 0x2)
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
rcu: Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
smp: Brought up 1 node, 1 CPU
smpboot: Max logical packages: 1
smpboot: Total of 1 processors activated (3601.18 BogoMIPS)
random: get_random_u32 called from 0xc033b4cd with crng_init=0
PM: Registering ACPI NVS region [mem 0x37ead000-0x37efffff] (339968 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 256 (order: 2, 16384 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [1000, fffff]
TOM: 0000000040000000 aka 1024M
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [c8000000, cfffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [f0000000, ffffffff]
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [40000000, c7ffffff]
bus: [bus 00-ff] on node 0 link 0
bus: 00 [io  0x0000-0xffff]
bus: 00 [mem 0x40000000-0xefffffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xf0000000-0xffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-00] at [mem 0xe0000000-0xe00fffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: PCI BIOS revision 2.10 entry at 0xfd61c, last bus=6
PCI: Using configuration type 1 for base access
cryptd: max_cpu_qlen set to 1000
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.LPC0.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-00] at [mem 0xe0000000-0xe00fffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe00fffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-00] only partially covers this bridge
acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000d4000-0x000d5fff window] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000d6000-0x000d7fff window] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000d8000-0x000d9fff window] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000da000-0x000dbfff window] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000e0000-0x000e1fff window] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000e2000-0x000e3fff window] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x40000000-0xffffffff window] (ignored)
acpi PNP0A03:00: host bridge window [io  0x0cf8-0x0cff] (ignored)
acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7 window] (ignored)
acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff window] (ignored)
PCI: root bus 00: hardware-probed resources
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x40000000-0xefffffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff]
pci_bus 0000:00: busn_res: can not insert [bus 00-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1002:5950] type 00 class 0x060000
pci 0000:00:01.0: [1002:5a3f] type 01 class 0x060400
pci 0000:00:13.0: [1002:4374] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xc0004000-0xc0004fff]
pci 0000:00:13.1: [1002:4375] type 00 class 0x0c0310
pci 0000:00:13.1: reg 0x10: [mem 0xc0005000-0xc0005fff]
pci 0000:00:13.2: [1002:4373] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xc0006000-0xc0006fff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4372] type 00 class 0x0c0500
pci 0000:00:14.0: reg 0x10: [io  0x8400-0x840f]
pci 0000:00:14.0: reg 0x14: [mem 0xc0007000-0xc00073ff]
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:14.1: [1002:4376] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io  0x8428-0x842f]
pci 0000:00:14.1: reg 0x14: [io  0x8434-0x8437]
pci 0000:00:14.1: reg 0x18: [io  0x8420-0x8427]
pci 0000:00:14.1: reg 0x1c: [io  0x8430-0x8433]
pci 0000:00:14.1: reg 0x20: [io  0x8410-0x841f]
pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
pci 0000:00:14.2: [1002:437b] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xc0000000-0xc0003fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1002:4377] type 00 class 0x060100
pci 0000:00:14.4: [1002:4371] type 01 class 0x060401
pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
pci_bus 0000:01: extended config space not accessible
pci 0000:01:05.0: [1002:5975] type 00 class 0x030000
pci 0000:01:05.0: reg 0x10: [mem 0xc8000000-0xcfffffff pref]
pci 0000:01:05.0: reg 0x14: [io  0x9000-0x90ff]
pci 0000:01:05.0: reg 0x18: [mem 0xc0100000-0xc010ffff]
pci 0000:01:05.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:05.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
pci 0000:00:01.0:   bridge window [mem 0xc0100000-0xc01fffff]
pci 0000:00:01.0:   bridge window [mem 0xc8000000-0xcfffffff 64bit pref]
pci_bus 0000:06: extended config space not accessible
pci 0000:06:05.0: [168c:001a] type 00 class 0x020000
pci 0000:06:05.0: reg 0x10: [mem 0xc0200000-0xc020ffff]
pci 0000:06:06.0: [1524:1410] type 02 class 0x060700
pci 0000:06:06.0: reg 0x10: [mem 0x00000000-0x00000fff]
pci 0000:06:06.0: supports D1 D2
pci 0000:06:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:07.0: [10ec:8169] type 00 class 0x020000
pci 0000:06:07.0: reg 0x10: [io  0xa000-0xa0ff]
pci 0000:06:07.0: reg 0x14: [mem 0xc0210000-0xc02100ff]
pci 0000:06:07.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:06:07.0: supports D1 D2
pci 0000:06:07.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:14.4: PCI bridge to [bus 06-07] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]
pci 0000:00:14.4:   bridge window [mem 0xc0200000-0xc02fffff]
pci 0000:00:14.4:   bridge window [io  0x0000-0xffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x40000000-0xefffffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
pci 0000:06:06.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci_bus 0000:07: extended config space not accessible
pci_bus 0000:07: busn_res: [bus 07] end can not be updated to 0a
pci 0000:00:14.4: bridge has subordinate 07 but max busn 0a
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions and events
pci 0000:01:05.0: vgaarb: setting as boot VGA device
pci 0000:01:05.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:05.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
videodev: Linux video capture interface: v2.00
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009b800-0x0009ffff]
e820: reserve RAM buffer [mem 0x37ea0000-0x37ffffff]
clocksource: Switched to clocksource tsc-early
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: Plug and Play ACPI device, IDs SYN0302 SYN0300 PNP0f13 (active)
system 00:04: [io  0x1080] has been reserved
system 00:04: [io  0x1200-0x120f] has been reserved
system 00:04: [io  0x0500-0x051f] has been reserved
system 00:04: [io  0x040b] has been reserved
system 00:04: [io  0x04d0-0x04d1] has been reserved
system 00:04: [io  0x04d6] has been reserved
system 00:04: [io  0x0c00-0x0c01] has been reserved
system 00:04: [io  0x0c14] has been reserved
system 00:04: [io  0x0c50-0x0c52] has been reserved
system 00:04: [io  0x0c6c] has been reserved
system 00:04: [io  0x0c6f] has been reserved
system 00:04: [io  0x0cd4-0x0cd5] has been reserved
system 00:04: [io  0x0cd6-0x0cd7] has been reserved
system 00:04: [io  0x0cd8-0x0cdf] has been reserved
system 00:04: [io  0x8000-0x805f] has been reserved
system 00:04: [io  0x8100-0x81ff window] has been reserved
system 00:04: [io  0x8200-0x82ff window] has been reserved
system 00:04: [io  0x0f40-0x0f47] has been reserved
system 00:04: [io  0x087f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:01:05.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
pnp 00:05: disabling [mem 0x00000000-0x00000fff disabled] because it overlaps 0000:06:07.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:05: [mem 0xb0007400-0xb00083ff] has been reserved
system 00:05: [mem 0xfff80000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 6 devices
PnPBIOS: Disabled
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:14.4: bridge window [mem 0x02000000-0x07ffffff pref] to [bus 06-07] add_size 6000000 add_align 4000000
pci 0000:00:14.4: BAR 15: assigned [mem 0x40000000-0x4bffffff pref]
pci 0000:01:05.0: BAR 6: assigned [mem 0xc0120000-0xc013ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
pci 0000:00:01.0:   bridge window [mem 0xc0100000-0xc01fffff]
pci 0000:00:01.0:   bridge window [mem 0xc8000000-0xcfffffff 64bit pref]
pci 0000:06:06.0: BAR 0: assigned [mem 0x4c000000-0x4c000fff]
pci 0000:06:06.0: BAR 15: assigned [mem 0x40000000-0x43ffffff pref]
pci 0000:06:06.0: BAR 16: assigned [mem 0x50000000-0x53ffffff]
pci 0000:06:07.0: BAR 6: assigned [mem 0x44000000-0x4401ffff pref]
pci 0000:06:06.0: BAR 13: assigned [io  0xa400-0xa4ff]
pci 0000:06:06.0: BAR 14: assigned [io  0xa800-0xa8ff]
pci 0000:06:06.0: CardBus bridge to [bus 07]
pci 0000:06:06.0:   bridge window [io  0xa400-0xa4ff]
pci 0000:06:06.0:   bridge window [io  0xa800-0xa8ff]
pci 0000:06:06.0:   bridge window [mem 0x40000000-0x43ffffff pref]
pci 0000:06:06.0:   bridge window [mem 0x50000000-0x53ffffff]
pci 0000:00:14.4: PCI bridge to [bus 06-07]
pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]
pci 0000:00:14.4:   bridge window [mem 0xc0200000-0xc02fffff]
pci 0000:00:14.4:   bridge window [mem 0x40000000-0x4bffffff pref]
pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x40000000-0xefffffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xf0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io  0x9000-0x9fff]
pci_bus 0000:01: resource 1 [mem 0xc0100000-0xc01fffff]
pci_bus 0000:01: resource 2 [mem 0xc8000000-0xcfffffff 64bit pref]
pci_bus 0000:06: resource 0 [io  0xa000-0xafff]
pci_bus 0000:06: resource 1 [mem 0xc0200000-0xc02fffff]
pci_bus 0000:06: resource 2 [mem 0x40000000-0x4bffffff pref]
pci_bus 0000:06: resource 4 [io  0x0000-0xffff]
pci_bus 0000:06: resource 5 [mem 0x40000000-0xefffffff]
pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 7 [mem 0xf0000000-0xffffffff]
pci_bus 0000:07: resource 0 [io  0xa400-0xa4ff]
pci_bus 0000:07: resource 1 [io  0xa800-0xa8ff]
pci_bus 0000:07: resource 2 [mem 0x40000000-0x43ffffff pref]
pci_bus 0000:07: resource 3 [mem 0x50000000-0x53ffffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:00.0: MSI quirk detected; MSI disabled
pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
pci 0000:00:13.0: 0xc04973ea took 266850 usecs
pci 0000:00:13.1: 0xc04973ea took 266882 usecs
pci 0000:01:05.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS mismatch (32 != 64), using 64 bytes
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 8920K
apm: BIOS not found.
workingset: timestamp_bits=30 max_order=18 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
fuse init (API version 7.27)
pstore: using deflate compression
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler mq-deadline registered (default)
io scheduler kyber registered
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
tsc: Marking TSC unstable due to TSC halts in idle
clocksource: Switched to clocksource acpi_pm
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZS0] (50 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZS1] (50 C)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Non-volatile memory driver v1.3
Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
brd: module loaded
mtip32xx Version 1.3.1
zram: Added device: zram0
VMware PVSCSI driver - version 1.0.7.0-k
isapnp: Scanning for PnP cards...
scsi host0: pata_atiixp
scsi host1: pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8410 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8418 irq 15
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
NET: Registered protocol family 24
yenta_cardbus 0000:06:06.0: CardBus bridge found [1025:0080]
yenta_cardbus 0000:06:06.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:06:06.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:06:06.0: TI: mfunc 0x01001002, devctl 0x44
ata2.00: ATAPI: Slimtype DVDRW SSW-8015S, HRS2, max UDMA/66
ata2.00: limited to UDMA/33 due to 40-wire cable
ata1.00: ATA-7: HTS421212H9AT00, HA4OA70S, max UDMA/100
ata1.00: 234441648 sectors, multi 16: LBA48
isapnp: No Plug & Play device found
scsi 0:0:0:0: Direct-Access     ATA      HTS421212H9AT00  A70S PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: CD-ROM            Slimtype DVDRW SSW-8015S  HRS2 PQ: 0 ANSI: 5
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
yenta_cardbus 0000:06:06.0: ISA IRQ mask 0x0cf8, PCI irq 20
yenta_cardbus 0000:06:06.0: Socket status: 30000006
yenta_cardbus 0000:06:06.0: pcmcia: parent PCI bridge window: [io  0xa000-0xafff]
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xafff:
 excluding 0xa000-0xa0ff 0xa400-0xa4ff 0xa800-0xa8ff
yenta_cardbus 0000:06:06.0: pcmcia: parent PCI bridge window: [mem 0xc0200000-0xc02fffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0200000-0xc02fffff:
 excluding 0xc0200000-0xc021ffff
yenta_cardbus 0000:06:06.0: pcmcia: parent PCI bridge window: [mem 0x40000000-0x4bffffff pref]
pcmcia_socket pcmcia_socket0: cs: memory probe 0x40000000-0x4bffffff:
 excluding 0x40000000-0x4bffffff
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:13.2: irq 19, io mem 0xc0006000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:13.0: irq 19, io mem 0xc0004000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ohci-pci 0000:00:13.1: OHCI PCI host controller
ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:13.1: irq 19, io mem 0xc0005000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums_eneub6250
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver appletouch
usbcore: registered new interface driver bcm5974
usbcore: registered new interface driver synaptics_usb
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: alarms up to one month, 114 bytes nvram
intel_powerclamp: CPU does not support MWAIT
softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
ledtrig-cpu: registered to indicate activity on CPUs
Driver for HIFN 795x crypto accelerator chip has been successfully registered.
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ipip: IPv4 and MPLS over IPv4 tunneling driver
IPv4 over IPsec tunneling driver
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Key type dns_resolver registered
Using IPI No-Shortcut mode
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Key type encrypted registered
rtc_cmos 00:01: setting system clock to 2019-12-23 01:51:26 UTC (1577065886)
Freeing unused kernel image memory: 656K
Write protecting the kernel text: 5404k
Write protecting the kernel read-only data: 1392k
Run /init as init process
random: fast init done
loop: module loaded
usb 2-1: new low-speed USB device number 2 using ohci-pci
input: PC Speaker as /devices/platform/pcspkr/input/input12
zram0: detected capacity change from 0 to 221048832
random: mkswap: uninitialized urandom read (16 bytes read)
Adding 215864k swap on /dev/zram0.  Priority:-2 extents:1 across:215864k SSFS
squashfs: version 4.0 (2009/01/31) Phillip Lougher
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000/0x0/0x0, board id: 0, fw id: 41763
 excluding 0x170-0x177 0x1f0-0x1f7
r8169 0000:06:07.0: not PCI Express
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
 0x370-0x377
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
 excluding 0x3f0-0x3f7 0x408-0x40f 0x4d0-0x4d7
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
 excluding 0x878-0x87f
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
libphy: r8169: probed
r8169 0000:06:07.0 eth0: RTL8169sb/8110sb, 00:16:d3:46:2a:d3, XID 10000000, IRQ 23
r8169 0000:06:07.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/0003:046D:C018.0001/input/input13
hid-generic 0003:046D:C018.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.0-1/input0
 excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
 excluding 0xc0000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
 clean
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
 clean
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
 clean
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:10/LNXVIDEO:00/input/input14
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
battery: ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
battery: ACPI: Battery Slot [BAT0] (battery present)
acer_wmi: Acer Laptop ACPI-WMI Extras
acer_wmi: Function bitmap for Communication Device: 0x20
random: crng init done
platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
platform regulatory.0: Falling back to syfs fallback for: regulatory.db
ath5k 0000:06:05.0: registered as 'phy0'
cfg80211: failed to load regulatory.db
ath: EEPROM regdomain: 0x63
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x63
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ath5k: phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
powernow_k8: fid 0xa (1800 MHz), vid 0x4
powernow_k8: fid 0x8 (1600 MHz), vid 0x6
powernow_k8: fid 0x0 (800 MHz), vid 0x16
powernow_k8: Found 1 AMD Turion(tm) 64 Mobile Technology ML-34 (1 cpu cores) (version 2.20.00)
RTL8211C Gigabit Ethernet r8169-638:00: attached PHY driver [RTL8211C Gigabit Ethernet] (mii_bus:phy_addr=r8169-638:00, irq=IGNORE)
r8169 0000:06:07.0 eth0: Link is Down
r8169 0000:06:07.0 eth0: Link is Up - 1Gbps/Full - flow control off