From 908fd51a94a5ea481f5b5089db4da2a89d401a28 Mon Sep 17 00:00:00 2001
From: luca020400 <[email protected]>
Date: Mon, 13 Jul 2015 14:44:09 +0200
Subject: [PATCH] msm8226-common: cleanup performance profiles

Change-Id: Ib649878fcbbc13966d63228d2096c03507bf9958
---
 rootdir/etc/init.qcom.rc | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/rootdir/etc/init.qcom.rc b/rootdir/etc/init.qcom.rc
index 3a38a1e..6467f9b 100644
--- a/rootdir/etc/init.qcom.rc
+++ b/rootdir/etc/init.qcom.rc
@@ -792,9 +792,6 @@ on charger
     write /sys/module/msm_pm/modes/cpu2/standalone_power_collapse/suspend_enabled 1
     write /sys/module/msm_pm/modes/cpu3/standalone_power_collapse/suspend_enabled 1
     write /sys/module/msm_show_resume_irq/parameters/debug_mask 1
-    write /sys/devices/system/cpu/cpu1/online 0
-    write /sys/devices/system/cpu/cpu2/online 0
-    write /sys/devices/system/cpu/cpu3/online 0
     write /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor "interactive"
     write /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq 300000
     chown system /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
@@ -816,9 +813,17 @@ on charger
     write /sys/devices/system/cpu/cpu3/online 1
     start charge_only_mode

-# CM Performance Profiles
-on property:sys.boot_completed=1
+on property:init.svc.bootanim=running
+    # Switch to NOOP and performance mode while booting
+    setprop sys.perf.profile 2
+    write /sys/block/mmcblk0/queue/scheduler noop
+
+on property:init.svc.bootanim=stopped
+    # Switch to fipos and balanced mode after boot for better UX
+    setprop sys.perf.profile 1
     write /sys/block/mmcblk0/queue/scheduler fiops
+
+on property:service.bootanim.exit=1
     write /sys/module/lpm_levels/enable_low_power/l2 4
     write /sys/module/msm_pm/modes/cpu0/power_collapse/suspend_enabled 1
     write /sys/module/msm_pm/modes/cpu1/power_collapse/suspend_enabled 1
@@ -866,6 +871,7 @@ on property:sys.boot_completed=1
     chmod 0664 /sys/devices/system/cpu/cpu3/online
     start mpdecision

+# CM Performance Profiles
 # Powersave
 on property:sys.perf.profile=0
     start mpdecision
--
2.1.4