API tools faq
paste
Advertisement
Guest User

Kernel Log

a guest
Apr 9th, 2021
57
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 25.44 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 4.14.221 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11306-c4a6851c72)) #0 Mon Feb 15 15:22:37 2021
  2. [ 0.000000] MyLoader: sysp=58af360f, boardp=753a5c27, parts=da2612b1
  3. [ 0.000000] bootconsole [early0] enabled
  4. [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
  5. [ 0.000000] SoC: Qualcomm Atheros QCA9533 ver 2 rev 0
  6. [ 0.000000] Determined physical RAM map:
  7. [ 0.000000] memory: 04000000 @ 00000000 (usable)
  8. [ 0.000000] Initrd not found or empty - disabling initrd
  9. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  10. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  11. [ 0.000000] Zone ranges:
  12. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
  13. [ 0.000000] Movable zone start for each node
  14. [ 0.000000] Early memory node ranges
  15. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
  16. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
  17. [ 0.000000] On node 0 totalpages: 16384
  18. [ 0.000000] free_area_init_node: node 0, pgdat 804ecd50, node_mem_map 81000020
  19. [ 0.000000] Normal zone: 128 pages used for memmap
  20. [ 0.000000] Normal zone: 0 pages reserved
  21. [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
  22. [ 0.000000] random: get_random_bytes called from 0x804f0740 with crng_init=0
  23. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  24. [ 0.000000] pcpu-alloc: [0] 0
  25. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256
  26. [ 0.000000] Kernel command line: board=TL-WR902AC-V1 mtdparts=spi0.0:128k(u-boot)ro,7360k(firmware),640k(tplink)ro,64k(art)ro console=ttyS0,115200 rootfstype=squashfs noinitrd
  27. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  28. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  29. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  30. [ 0.000000] Writing ErrCtl register=00000000
  31. [ 0.000000] Readback ErrCtl register=00000000
  32. [ 0.000000] Memory: 59320K/65536K available (3955K kernel code, 192K rwdata, 516K rodata, 320K init, 212K bss, 6216K reserved, 0K cma-reserved)
  33. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  34. [ 0.000000] NR_IRQS: 51
  35. [ 0.000000] Clocks: CPU:650.000MHz, DDR:392.016MHz, AHB:216.666MHz, Ref:25.000MHz
  36. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5880801374 ns
  37. [ 0.000010] sched_clock: 32 bits at 325MHz, resolution 3ns, wraps every 6607641598ns
  38. [ 0.008294] Calibrating delay loop... 432.53 BogoMIPS (lpj=2162688)
  39. [ 0.074882] pid_max: default: 32768 minimum: 301
  40. [ 0.079997] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  41. [ 0.086977] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  42. [ 0.097228] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  43. [ 0.107681] futex hash table entries: 256 (order: -1, 3072 bytes)
  44. [ 0.115689] NET: Registered protocol family 16
  45. [ 0.122237] MIPS: machine is TP-LINK TL-WR902AC v1
  46. [ 0.369095] registering PCI controller with io_map_base unset
  47. [ 0.391938] PCI host bridge to bus 0000:00
  48. [ 0.396359] pci_bus 0000:00: root bus resource [mem 0x10000000-0x11ffffff]
  49. [ 0.403601] pci_bus 0000:00: root bus resource [io 0x0000]
  50. [ 0.409483] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
  51. [ 0.416632] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  52. [ 0.425038] pci 0000:00:00.0: [168c:0050] type 00 class 0x028000
  53. [ 0.425056] pci 0000:00:00.0: invalid calibration data
  54. [ 0.430511] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
  55. [ 0.430566] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
  56. [ 0.430653] pci 0000:00:00.0: supports D1
  57. [ 0.430662] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  58. [ 0.430904] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
  59. [ 0.430939] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x101fffff 64bit]
  60. [ 0.438720] pci 0000:00:00.0: BAR 6: assigned [mem 0x10200000-0x1020ffff pref]
  61. [ 0.450913] clocksource: Switched to clocksource MIPS
  62. [ 0.457555] NET: Registered protocol family 2
  63. [ 0.463322] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  64. [ 0.470687] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  65. [ 0.477488] TCP: Hash tables configured (established 1024 bind 1024)
  66. [ 0.484411] UDP hash table entries: 256 (order: 0, 4096 bytes)
  67. [ 0.490598] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  68. [ 0.497615] NET: Registered protocol family 1
  69. [ 0.502324] PCI: CLS 0 bytes, default 32
  70. [ 0.506203] Crashlog allocated RAM at address 0x3f00000
  71. [ 0.513563] workingset: timestamp_bits=30 max_order=14 bucket_order=0
  72. [ 0.526384] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  73. [ 0.532603] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  74. [ 0.555827] io scheduler noop registered
  75. [ 0.559974] io scheduler deadline registered (default)
  76. [ 0.566029] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  77. [ 0.575215] console [ttyS0] disabled
  78. [ 0.599175] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A
  79. [ 0.608302] console [ttyS0] enabled
  80. [ 0.615878] bootconsole [early0] disabled
  81. [ 0.633604] m25p80 spi0.0: found mx25l6405d, expected m25p80
  82. [ 0.640346] m25p80 spi0.0: mx25l6405d (8192 Kbytes)
  83. [ 0.645511] 4 cmdlinepart partitions found on MTD device spi0.0
  84. [ 0.651644] Creating 4 MTD partitions on "spi0.0":
  85. [ 0.656610] 0x000000000000-0x000000020000 : "u-boot"
  86. [ 0.664029] 0x000000020000-0x000000750000 : "firmware"
  87. [ 0.686242] 2 tplink-fw partitions found on MTD device firmware
  88. [ 0.692422] 0x000000020000-0x0000001a4307 : "kernel"
  89. [ 0.698419] 0x0000001a4307-0x000000750000 : "rootfs"
  90. [ 0.704460] mtd: device 3 (rootfs) set to be root filesystem
  91. [ 0.710359] 1 squashfs-split partitions found on MTD device rootfs
  92. [ 0.716847] 0x000000460000-0x000000750000 : "rootfs_data"
  93. [ 0.726493] 0x000000750000-0x0000007f0000 : "tplink"
  94. [ 0.733494] 0x0000007f0000-0x000000800000 : "art"
  95. [ 0.742341] libphy: Fixed MDIO Bus: probed
  96. [ 0.779560] libphy: ag71xx_mdio: probed
  97. [ 1.413961] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd042, driver=Generic PHY]
  98. [ 1.424131] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: mii
  99. [ 1.432914] NET: Registered protocol family 10
  100. [ 1.444244] Segment Routing with IPv6
  101. [ 1.448146] NET: Registered protocol family 17
  102. [ 1.452900] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  103. [ 1.467065] 8021q: 802.1Q VLAN Support v1.8
  104. [ 1.473599] hctosys: unable to open rtc device (rtc0)
  105. [ 1.484904] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
  106. [ 1.495030] Freeing unused kernel memory: 320K
  107. [ 1.499620] This architecture does not have kernel memory protection.
  108. [ 2.170747] init: Console is alive
  109. [ 2.174730] init: - watchdog -
  110. [ 2.500932] random: fast init done
  111. [ 3.318487] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  112. [ 3.381794] usbcore: registered new interface driver usbfs
  113. [ 3.387543] usbcore: registered new interface driver hub
  114. [ 3.393235] usbcore: registered new device driver usb
  115. [ 3.405634] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  116. [ 3.414592] ehci-platform: EHCI generic platform driver
  117. [ 3.420112] ehci-platform ehci-platform: EHCI Host Controller
  118. [ 3.426188] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
  119. [ 3.436553] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
  120. [ 3.470948] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
  121. [ 3.478385] hub 1-0:1.0: USB hub found
  122. [ 3.482833] hub 1-0:1.0: 1 port detected
  123. [ 3.488593] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  124. [ 3.498733] init: - preinit -
  125. [ 4.739169] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  126. [ 4.773183] random: procd: uninitialized urandom read (4 bytes read)
  127. [ 8.157701] jffs2: notice: (438) jffs2_build_xattr_subsystem: complete building xattr subsystem, 7 of xdatum (3 unchecked, 4 orphan) and 71 of xref (5 dead, 0 orphan) found.
  128. [ 8.176168] mount_root: switching to jffs2 overlay
  129. [ 8.213018] overlayfs: upper fs does not support tmpfile.
  130. [ 8.226005] urandom-seed: Seeding with /etc/urandom.seed
  131. [ 8.490634] procd: - early -
  132. [ 8.493979] procd: - watchdog -
  133. [ 9.146887] procd: - watchdog -
  134. [ 9.150562] procd: - ubus -
  135. [ 9.341665] random: ubusd: uninitialized urandom read (4 bytes read)
  136. [ 9.350305] random: ubusd: uninitialized urandom read (4 bytes read)
  137. [ 9.357541] random: ubusd: uninitialized urandom read (4 bytes read)
  138. [ 9.365335] procd: - init -
  139. [ 10.627995] kmodloader: loading kernel modules from /etc/modules.d/*
  140. [ 10.712655] ip6_tables: (C) 2000-2006 Netfilter Core Team
  141. [ 10.743491] Loading modules backported from Linux version v4.19.161-0-gdaefdc9eb24b
  142. [ 10.751508] Backport generated by backports.git v4.19.161-1-0-g4bb568fe
  143. [ 10.783912] ip_tables: (C) 2000-2006 Netfilter Core Team
  144. [ 10.811349] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
  145. [ 10.974915] xt_time: kernel timezone is -0000
  146. [ 11.237123] urngd: v1.0.2 started.
  147. [ 11.257505] PPP generic driver version 2.4.2
  148. [ 11.272418] NET: Registered protocol family 24
  149. [ 11.364603] pci 0000:00:00.0: using irq 40 for pin 1
  150. [ 11.369752] ath10k 4.19 driver, optimized for CT firmware, probing pci device: 0x50.
  151. [ 11.392515] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
  152. [ 11.398567] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
  153. [ 11.557639] random: crng init done
  154. [ 11.561223] random: 6 urandom warning(s) missed due to ratelimiting
  155. [ 11.711405] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/fwcfg-pci-0000:00:00.0.txt failed with error -2
  156. [ 11.722352] ath10k_pci 0000:00:00.0: Falling back to user helper
  157. [ 12.137999] firmware ath10k!fwcfg-pci-0000:00:00.0.txt: firmware_loading_store: map pages failed
  158. [ 12.147602] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:00:00.0.bin failed with error -2
  159. [ 12.158721] ath10k_pci 0000:00:00.0: Falling back to user helper
  160. [ 12.531977] firmware ath10k!pre-cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed
  161. [ 12.543876] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA9887/hw1.0/ct-firmware-5.bin failed with error -2
  162. [ 12.555294] ath10k_pci 0000:00:00.0: Falling back to user helper
  163. [ 12.922025] firmware ath10k!QCA9887!hw1.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
  164. [ 12.932957] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA9887/hw1.0/ct-firmware-2.bin failed with error -2
  165. [ 12.944350] ath10k_pci 0000:00:00.0: Falling back to user helper
  166. [ 13.298410] firmware ath10k!QCA9887!hw1.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
  167. [ 13.308464] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA9887/hw1.0/firmware-6.bin failed with error -2
  168. [ 13.319587] ath10k_pci 0000:00:00.0: Falling back to user helper
  169. [ 13.682038] firmware ath10k!QCA9887!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
  170. [ 13.691820] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA9887/hw1.0/firmware-5.bin failed with error -2
  171. [ 13.702941] ath10k_pci 0000:00:00.0: Falling back to user helper
  172. [ 13.980684] firmware ath10k!QCA9887!hw1.0!firmware-5.bin: firmware_loading_store: map pages failed
  173. [ 13.990491] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA9887/hw1.0/firmware-4.bin failed with error -2
  174. [ 14.001615] ath10k_pci 0000:00:00.0: Falling back to user helper
  175. [ 14.201651] firmware ath10k!QCA9887!hw1.0!firmware-4.bin: firmware_loading_store: map pages failed
  176. [ 14.211427] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA9887/hw1.0/firmware-3.bin failed with error -2
  177. [ 14.222549] ath10k_pci 0000:00:00.0: Falling back to user helper
  178. [ 14.404142] firmware ath10k!QCA9887!hw1.0!firmware-3.bin: firmware_loading_store: map pages failed
  179. [ 14.420591] ath10k_pci 0000:00:00.0: qca9887 hw1.0 target 0x4100016d chip_id 0x004000ff sub 0000:0000
  180. [ 14.430212] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
  181. [ 14.444202] ath10k_pci 0000:00:00.0: firmware ver 10.1-ct-87-__fW-022-538f0906 api 2 features wmi-10.x,has-wmi-mgmt-tx,mfp,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT crc32 e27449db
  182. [ 14.565052] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA9887/hw1.0/board-2.bin failed with error -2
  183. [ 14.575897] ath10k_pci 0000:00:00.0: Falling back to user helper
  184. [ 14.692749] firmware ath10k!QCA9887!hw1.0!board-2.bin: firmware_loading_store: map pages failed
  185. [ 14.726849] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 546cca0d
  186. [ 16.112491] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
  187. [ 16.127206] ath10k_pci 0000:00:00.0: wmi print 'P 128 V 8 T 410'
  188. [ 16.133831] ath10k_pci 0000:00:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0'
  189. [ 16.142152] ath10k_pci 0000:00:00.0: wmi print 'alloc rem: 21576 iram: 11700'
  190. [ 16.216876] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 2 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
  191. [ 16.239371] ath10k_pci 0000:00:00.0: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000
  192. [ 16.375461] ath: EEPROM regdomain: 0x0
  193. [ 16.375471] ath: EEPROM indicates default country code should be used
  194. [ 16.375475] ath: doing EEPROM country->regdmn map search
  195. [ 16.375495] ath: country maps to regdmn code: 0x3a
  196. [ 16.375501] ath: Country alpha2 being used: US
  197. [ 16.375504] ath: Regpair used: 0x3a
  198. [ 16.524269] ath: EEPROM regdomain: 0x0
  199. [ 16.524283] ath: EEPROM indicates default country code should be used
  200. [ 16.524286] ath: doing EEPROM country->regdmn map search
  201. [ 16.524305] ath: country maps to regdmn code: 0x3a
  202. [ 16.524311] ath: Country alpha2 being used: US
  203. [ 16.524314] ath: Regpair used: 0x3a
  204. [ 16.539428] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
  205. [ 16.541982] ieee80211 phy1: Atheros AR9531 Rev:2 mem=0xb8100000, irq=47
  206. [ 16.571557] kmodloader: done loading kernel modules from /etc/modules.d/*
  207. [ 28.421417] br-lan: port 1(eth0) entered blocking state
  208. [ 28.426839] br-lan: port 1(eth0) entered disabled state
  209. [ 28.432724] device eth0 entered promiscuous mode
  210. [ 28.472557] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  211. [ 32.568032] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
  212. [ 32.715065] br-lan: port 2(wlan1) entered blocking state
  213. [ 32.720579] br-lan: port 2(wlan1) entered disabled state
  214. [ 32.726752] device wlan1 entered promiscuous mode
  215. [ 34.675454] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
  216. [ 34.690251] ath10k_pci 0000:00:00.0: wmi print 'P 128 V 8 T 410'
  217. [ 34.697252] ath10k_pci 0000:00:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0'
  218. [ 34.705648] ath10k_pci 0000:00:00.0: wmi print 'alloc rem: 21576 iram: 11700'
  219. [ 34.801839] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware
  220. [ 34.821602] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready
  221. [ 34.880038] br-lan: port 3(wlan0-1) entered blocking state
  222. [ 34.885822] br-lan: port 3(wlan0-1) entered disabled state
  223. [ 34.892137] device wlan0-1 entered promiscuous mode
  224. [ 37.722167] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  225. [ 40.640558] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
  226. [ 40.647490] br-lan: port 2(wlan1) entered blocking state
  227. [ 40.653069] br-lan: port 2(wlan1) entered forwarding state
  228. [ 40.677636] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  229. [ 177.901958] device wlan0-1 left promiscuous mode
  230. [ 177.907171] br-lan: port 3(wlan0-1) entered disabled state
  231. [ 181.014146] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
  232. [ 181.029078] ath10k_pci 0000:00:00.0: wmi print 'P 128 V 8 T 410'
  233. [ 181.036101] ath10k_pci 0000:00:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0'
  234. [ 181.044498] ath10k_pci 0000:00:00.0: wmi print 'alloc rem: 21576 iram: 11700'
  235. [ 181.142037] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware
  236. [ 181.161877] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready
  237. [ 181.192707] br-lan: port 3(wlan0-1) entered blocking state
  238. [ 181.198396] br-lan: port 3(wlan0-1) entered disabled state
  239. [ 181.204783] device wlan0-1 entered promiscuous mode
  240. [ 184.028507] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  241. [ 254.291176] br-lan: port 2(wlan1) entered disabled state
  242. [ 254.343451] device eth0 left promiscuous mode
  243. [ 254.348146] br-lan: port 1(eth0) entered disabled state
  244. [ 254.384419] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  245. [ 254.415330] device wlan0-1 left promiscuous mode
  246. [ 254.420493] br-lan: port 3(wlan0-1) entered disabled state
  247. [ 254.451226] device wlan1 left promiscuous mode
  248. [ 254.456217] br-lan: port 2(wlan1) entered disabled state
  249. [ 259.061406] br-lan: port 1(eth0) entered blocking state
  250. [ 259.066860] br-lan: port 1(eth0) entered disabled state
  251. [ 259.072688] device eth0 entered promiscuous mode
  252. [ 259.097171] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  253. [ 261.402110] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
  254. [ 261.515079] br-lan: port 2(wlan1) entered blocking state
  255. [ 261.520590] br-lan: port 2(wlan1) entered disabled state
  256. [ 261.526745] device wlan1 entered promiscuous mode
  257. [ 263.829984] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
  258. [ 263.844786] ath10k_pci 0000:00:00.0: wmi print 'P 128 V 8 T 410'
  259. [ 263.851106] ath10k_pci 0000:00:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0'
  260. [ 263.859786] ath10k_pci 0000:00:00.0: wmi print 'alloc rem: 21576 iram: 11700'
  261. [ 263.965700] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware
  262. [ 263.990537] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready
  263. [ 264.024049] br-lan: port 3(wlan0-1) entered blocking state
  264. [ 264.029954] br-lan: port 3(wlan0-1) entered disabled state
  265. [ 264.036130] device wlan0-1 entered promiscuous mode
  266. [ 266.883182] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  267. [ 269.805909] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
  268. [ 269.812876] br-lan: port 2(wlan1) entered blocking state
  269. [ 269.818371] br-lan: port 2(wlan1) entered forwarding state
  270. [ 269.841386] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  271. [ 316.292406] wlan0: authenticate with 0a:8b:37:e9:8f:f9
  272. [ 316.311173] wlan0: send auth to 0a:8b:37:e9:8f:f9 (try 1/3)
  273. [ 316.318422] wlan0: authenticated
  274. [ 316.331015] wlan0: associate with 0a:8b:37:e9:8f:f9 (try 1/3)
  275. [ 316.339438] wlan0: RX AssocResp from 0a:8b:37:e9:8f:f9 (capab=0x401 status=0 aid=1)
  276. [ 316.349124] wlan0: associated
  277. [ 316.371651] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  278. [ 316.396775] wlan0: Limiting TX power to 27 (30 - 3) dBm as advertised by 0a:8b:37:e9:8f:f9
  279. [ 317.187515] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
  280. [ 317.195073] br-lan: port 3(wlan0-1) entered blocking state
  281. [ 317.200841] br-lan: port 3(wlan0-1) entered forwarding state
  282. [ 334.105248] wlan0: disassociated from 0a:8b:37:e9:8f:f9 (Reason: 8=DISASSOC_STA_HAS_LEFT)
  283. [ 334.443717] wlan0: authenticate with 0a:8b:37:e9:8f:f9
  284. [ 334.466396] wlan0: send auth to 0a:8b:37:e9:8f:f9 (try 1/3)
  285. [ 334.474656] wlan0: authenticated
  286. [ 334.491143] wlan0: associate with 0a:8b:37:e9:8f:f9 (try 1/3)
  287. [ 334.501374] wlan0: RX AssocResp from 0a:8b:37:e9:8f:f9 (capab=0x401 status=0 aid=1)
  288. [ 334.511999] wlan0: associated
  289. [ 334.536221] wlan0: Limiting TX power to 27 (30 - 3) dBm as advertised by 0a:8b:37:e9:8f:f9
  290. [ 338.039326] wlan0: deauthenticated from 0a:8b:37:e9:8f:f9 (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA)
  291. [ 338.073378] wlan0: authenticate with 0a:8b:37:e9:8f:f9
  292. [ 338.091871] wlan0: send auth to 0a:8b:37:e9:8f:f9 (try 1/3)
  293. [ 338.099631] wlan0: authenticated
  294. [ 338.121036] wlan0: associate with 0a:8b:37:e9:8f:f9 (try 1/3)
  295. [ 338.139916] ------------[ cut here ]------------
  296. [ 338.145005] WARNING: CPU: 0 PID: 2946 at backports-4.19.161-1/net/mac80211/ieee80211_i.h:1429 0x83206490 [mac80211@83200000+0x6c6c0]
  297. [ 338.157812] Modules linked in: ath9k ath9k_common pppoe ppp_async ath9k_hw ath10k_pci ath10k_core ath pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat ledtrig_usbport nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
  298. [ 338.230507] CPU: 0 PID: 2946 Comm: hostapd Not tainted 4.14.221 #0
  299. [ 338.237227] Stack : 0000005c 800b4a54 804f0000 8049b4e4 00000000 00000000 00000000 00000000
  300. [ 338.246262] 00000000 00000000 00000000 00000000 00000000 00000001 81787a58 6a1b395a
  301. [ 338.255310] 81787af0 00000000 00000000 00006480 00000038 80436238 00000008 00000000
  302. [ 338.264313] 0000012a 0c23ab61 00000129 00000000 81787a38 80000000 00000000 83266868
  303. [ 338.273306] 83206490 00000595 014000c0 00000010 00000001 80270224 00000000 80540000
  304. [ 338.282327] ...
  305. [ 338.285022] Call Trace:
  306. [ 338.285041] [<800b4a54>] 0x800b4a54
  307. [ 338.291476] [<804f0000>] 0x804f0000
  308. [ 338.295367] [<80436238>] 0x80436238
  309. [ 338.299038] [<83206490>] 0x83206490 [mac80211@83200000+0x6c6c0]
  310. [ 338.305487] [<80270224>] 0x80270224
  311. [ 338.309291] [<8006c22c>] 0x8006c22c
  312. [ 338.312973] [<8006c234>] 0x8006c234
  313. [ 338.316872] [<80086a40>] 0x80086a40
  314. [ 338.320724] [<83206490>] 0x83206490 [mac80211@83200000+0x6c6c0]
  315. [ 338.326949] [<80086b28>] 0x80086b28
  316. [ 338.330944] [<83206490>] 0x83206490 [mac80211@83200000+0x6c6c0]
  317. [ 338.337265] [<83220bf4>] 0x83220bf4 [mac80211@83200000+0x6c6c0]
  318. [ 338.343800] [<801564c4>] 0x801564c4
  319. [ 338.347531] [<8315e924>] 0x8315e924 [cfg80211@83140000+0x36370]
  320. [ 338.353990] [<8033b00c>] 0x8033b00c
  321. [ 338.357647] [<8033ad20>] 0x8033ad20
  322. [ 338.361696] [<80339868>] 0x80339868
  323. [ 338.365309] [<800a72d4>] 0x800a72d4
  324. [ 338.368916] [<80339f84>] 0x80339f84
  325. [ 338.372884] [<80337708>] 0x80337708
  326. [ 338.376540] [<80338f2c>] 0x80338f2c
  327. [ 338.380138] [<80339408>] 0x80339408
  328. [ 338.383812] [<802e2540>] 0x802e2540
  329. [ 338.387869] [<80336a44>] 0x80336a44
  330. [ 338.391607] [<8033902c>] 0x8033902c
  331. [ 338.395207] [<802e27a0>] 0x802e27a0
  332. [ 338.399157] [<802e2408>] 0x802e2408
  333. [ 338.403108] [<800718f4>] 0x800718f4
  334. [ 338.406741] [<802e3264>] 0x802e3264
  335. [ 338.410578] [<802e3028>] 0x802e3028
  336. [ 338.414527] [<802e1028>] 0x802e1028
  337. [ 338.418173] [<800714ac>] 0x800714ac
  338. [ 338.421898] [<802e2dc8>] 0x802e2dc8
  339. [ 338.425651]
  340. [ 338.427210] ---[ end trace 7d770854605fa219 ]---
  341. [ 338.432344] wlan0: RX AssocResp from 0a:8b:37:e9:8f:f9 (capab=0x401 status=0 aid=1)
  342. [ 338.462585] wlan0: associated
  343. [ 338.466318] wlan0: Limiting TX power to 27 (30 - 3) dBm as advertised by 0a:8b:37:e9:8f:f9
  344. [ 392.309460] wlan0: disassociated from 0a:8b:37:e9:8f:f9 (Reason: 8=DISASSOC_STA_HAS_LEFT)
  345. [ 392.654848] wlan0: authenticate with 0a:8b:37:e9:8f:f9
  346. [ 392.677552] wlan0: send auth to 0a:8b:37:e9:8f:f9 (try 1/3)
  347. [ 392.686702] wlan0: authenticated
  348. [ 392.700989] wlan0: associate with 0a:8b:37:e9:8f:f9 (try 1/3)
  349. [ 392.810973] wlan0: associate with 0a:8b:37:e9:8f:f9 (try 2/3)
  350. [ 392.819288] wlan0: deauthenticated from 0a:8b:37:e9:8f:f9 while associating (Reason: 9=STA_REQ_ASSOC_WITHOUT_AUTH)
  351. [ 393.143051] wlan0: authenticate with 0a:8b:37:e9:8f:f9
  352. [ 393.165664] wlan0: send auth to 0a:8b:37:e9:8f:f9 (try 1/3)
  353. [ 393.280971] wlan0: send auth to 0a:8b:37:e9:8f:f9 (try 2/3)
  354. [ 393.288391] wlan0: authenticated
  355. [ 393.301014] wlan0: associate with 0a:8b:37:e9:8f:f9 (try 1/3)
  356. [ 393.391016] br-lan: port 3(wlan0-1) entered disabled state
  357. [ 393.410981] wlan0: associate with 0a:8b:37:e9:8f:f9 (try 2/3)
  358. [ 393.419213] wlan0: deauthenticated from 0a:8b:37:e9:8f:f9 while associating (Reason: 9=STA_REQ_ASSOC_WITHOUT_AUTH)
  359. [ 406.561704] wlan0: authenticate with 0a:8b:37:e9:8f:f9
  360. [ 406.584928] wlan0: send auth to 0a:8b:37:e9:8f:f9 (try 1/3)
  361. [ 406.592389] wlan0: authenticated
  362. [ 406.601228] wlan0: associate with 0a:8b:37:e9:8f:f9 (try 1/3)
  363. [ 406.609183] wlan0: RX AssocResp from 0a:8b:37:e9:8f:f9 (capab=0x401 status=0 aid=1)
  364. [ 406.619437] wlan0: associated
  365. [ 406.623037] wlan0: Limiting TX power to 27 (30 - 3) dBm as advertised by 0a:8b:37:e9:8f:f9
  366. [ 406.662070] br-lan: port 3(wlan0-1) entered blocking state
  367. [ 406.667791] br-lan: port 3(wlan0-1) entered forwarding state
  368. [ 416.642875] wlan0: authenticate with 0a:8b:37:e9:8f:f9
  369. [ 416.665654] wlan0: send auth to 0a:8b:37:e9:8f:f9 (try 1/3)
  370. [ 416.781181] wlan0: send auth to 0a:8b:37:e9:8f:f9 (try 2/3)
  371. [ 416.890980] wlan0: send auth to 0a:8b:37:e9:8f:f9 (try 3/3)
  372. [ 417.000988] wlan0: authentication with 0a:8b:37:e9:8f:f9 timed out
  373. [ 417.391047] br-lan: port 3(wlan0-1) entered disabled state
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!