>>> Messages generated by process 13279 on 2024-06-16 14:39:15 -00 for package dev-python/ssl-fetch-0.4-r1:

LOG: postinst
This is beta software.
The APIs it installs should be considered unstable
and are subject to change in these early versions.

Please file any enhancement requests, or bugs
at https://github.com/dol-sen/ssl-fetch/issues

>>> Messages generated by process 27989 on 2024-06-16 15:27:40 -00 for package sys-libs/pam-1.5.3-r1:

WARN: postinst
Some software with pre-loaded PAM libraries might experience
warnings or failures related to missing symbols and/or versions
after any update. While unfortunate this is a limit of the
implementation of PAM and the software, and it requires you to
restart the software manually after the update.

You can get a list of such software running a command like
  lsof / | grep -E -i 'del.*libpam\.so'

Alternatively, simply reboot your system.

>>> Messages generated by process 27989 on 2024-06-16 15:28:14 -00 for package app-shells/bash-5.1_p16-r11:

WARN: postinst
Files situated under /etc/bash/bashrc.d must now have a suffix of .sh or .bash.

Gentoo now defaults to defining PROMPT_COMMAND as an array. Depending on the
characteristics of the operating environment, this array may contain commands
to set the window and pane title. Users that choose to customise this variable
in ~/.bashrc are advised to append their commands, using the following syntax.

PROMPT_COMMAND+=('custom command goes here')

Alternatively, users that wish to opt out of Gentoo's window title setting
behaviour may now do so by either unsetting PROMPT_COMMAND or by re-defining it
as desired. Previously, there was no formally supported method of opting out.

>>> Messages generated by process 27989 on 2024-06-16 15:30:10 -00 for package dev-python/requests-2.32.3:

QA: install
QA Notice: setuptools warnings detected:

	Invalid dash-separated options

>>> Messages generated by process 5480 on 2024-06-16 16:38:05 BST for package app-alternatives/cpio-0:

ERROR: preinst
This package will overwrite one or more files that may belong to other
packages (see list below). You can use a command such as `portageq
owners / <filename>` to identify the installed package that owns a
file. If portageq reports that only one package owns a file then do
NOT file a bug report. A bug report is only useful if it identifies at
least two or more packages that are known to install the same file(s).
If a collision occurs and you can not explain where the file came from
then you should simply ignore the collision since there is not enough
information to determine if a real problem exists. Please do NOT file
a bug report at https://bugs.gentoo.org/ unless you report exactly
which two packages install the same file(s). See
https://wiki.gentoo.org/wiki/Knowledge_Base:Blockers for tips on how
to solve the problem. And once again, please do NOT file a bug report
unless you have completely understood the above message.

Detected file collision(s):

	/bin/cpio

Searching all installed packages for file collisions...

Press Ctrl-C to Stop

WARN: preinst
None of the installed packages claim the file(s).

Package 'app-alternatives/cpio-0' merged despite file collisions. If
necessary, refer to your elog messages for the whole content of the
above message.

>>> Messages generated by process 5480 on 2024-06-16 16:39:11 BST for package sys-kernel/gentoo-sources-6.6.30:

LOG: postinst
If you are upgrading from a previous kernel, you may be interested
in the following document:
  - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Install additional packages for optional runtime features:
  sys-kernel/installkernel for versioned kernel image installation and optionally automating tasks such as generating an initramfs or unified kernel image

>>> Messages generated by process 22367 on 2024-06-16 16:49:53 BST for package sys-kernel/linux-firmware-20240610:

LOG: install
Your configuration for sys-kernel/linux-firmware-20240610 has been saved in
"/etc/portage/savedconfig/sys-kernel/linux-firmware-20240610" for your editing pleasure.
You can edit these files by hand and remerge this package with
USE=savedconfig to customise the configuration.
You can rename this file/directory to one of the following for
its configuration to apply to multiple versions:
${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
[${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
LOG: postinst
If you are only interested in particular firmware files, edit the saved
configfile and remove those that you do not want.
QA: other
QA Notice: RESTRICT=binchecks prevented checks on these ELF files:
/lib/firmware/netronome/bpf/nic_AMDA0097-0001_2x40.nffw
/lib/firmware/netronome/bpf/nic_AMDA0097-0001_4x10_1x40.nffw
/lib/firmware/netronome/bpf/nic_AMDA0058-0012_2x40.nffw
/lib/firmware/netronome/bpf/nic_AMDA0078-0011_1x100.nffw
/lib/firmware/netronome/bpf/nic_AMDA0058-0011_2x40.nffw
/lib/firmware/netronome/bpf/nic_AMDA0081-0001_1x40.nffw
/lib/firmware/netronome/bpf/nic_AMDA0099-0001_2x10.nffw
/lib/firmware/netronome/bpf/nic_AMDA0081-0001_4x10.nffw
/lib/firmware/netronome/bpf/nic_AMDA0099-0001_1x10_1x25.nffw
/lib/firmware/netronome/bpf/nic_AMDA0099-0001_2x25.nffw
/lib/firmware/netronome/bpf/nic_AMDA0096-0001_2x10.nffw
/lib/firmware/netronome/bpf/nic_AMDA0097-0001_8x10.nffw
/lib/firmware/netronome/nic/nic_AMDA0097-0001_2x40.nffw
/lib/firmware/netronome/nic/nic_AMDA0097-0001_4x10_1x40.nffw
/lib/firmware/netronome/nic/nic_AMDA0058-0012_2x40.nffw
/lib/firmware/netronome/nic/nic_AMDA0078-0011_1x100.nffw
/lib/firmware/netronome/nic/nic_AMDA0058-0011_2x40.nffw
/lib/firmware/netronome/nic/nic_AMDA0081-0001_1x40.nffw
/lib/firmware/netronome/nic/nic_AMDA0099-0001_2x10.nffw
/lib/firmware/netronome/nic/nic_AMDA0081-0001_4x10.nffw
/lib/firmware/netronome/nic/nic_AMDA0099-0001_1x10_1x25.nffw
/lib/firmware/netronome/nic/nic_AMDA0099-0001_2x25.nffw
/lib/firmware/netronome/nic/nic_AMDA0096-0001_2x10.nffw
/lib/firmware/netronome/nic/nic_AMDA0097-0001_8x10.nffw
/lib/firmware/netronome/nic-sriov/nic_AMDA0097-0001_2x40.nffw
/lib/firmware/netronome/nic-sriov/nic_AMDA0097-0001_4x10_1x40.nffw
/lib/firmware/netronome/nic-sriov/nic_AMDA0058-0012_2x40.nffw
/lib/firmware/netronome/nic-sriov/nic_AMDA0078-0011_1x100.nffw
/lib/firmware/netronome/nic-sriov/nic_AMDA0058-0011_2x40.nffw
/lib/firmware/netronome/nic-sriov/nic_AMDA0081-0001_1x40.nffw
/lib/firmware/netronome/nic-sriov/nic_AMDA0099-0001_2x10.nffw
/lib/firmware/netronome/nic-sriov/nic_AMDA0081-0001_4x10.nffw
/lib/firmware/netronome/nic-sriov/nic_AMDA0099-0001_1x10_1x25.nffw
/lib/firmware/netronome/nic-sriov/nic_AMDA0099-0001_2x25.nffw
/lib/firmware/netronome/nic-sriov/nic_AMDA0096-0001_2x10.nffw
/lib/firmware/netronome/nic-sriov/nic_AMDA0097-0001_8x10.nffw
/lib/firmware/netronome/flower/nic_AMDA0099.nffw
/lib/firmware/netronome/flower/nic_AMDA0097.nffw
/lib/firmware/netronome/flower/nic_AMDA0058.nffw
/lib/firmware/netronome/flower/nic_AMDA0096.nffw
/lib/firmware/powervr/rogue_33.15.11.3_v1.fw
/lib/firmware/ath11k/WCN6855/hw2.0/amss.bin
/lib/firmware/ath11k/WCN6855/hw2.0/m3.bin
/lib/firmware/ath11k/IPQ8074/hw2.0/q6_fw.b00
/lib/firmware/ath11k/IPQ8074/hw2.0/m3_fw.b00
/lib/firmware/ath11k/IPQ8074/hw2.0/q6_fw.mdt
/lib/firmware/ath11k/IPQ8074/hw2.0/m3_fw.mdt
/lib/firmware/ath11k/QCN9074/hw1.0/amss.bin
/lib/firmware/ath11k/QCN9074/hw1.0/m3.bin
/lib/firmware/ath11k/QCA6390/hw2.0/amss.bin
/lib/firmware/ath11k/QCA6390/hw2.0/m3.bin
/lib/firmware/ath11k/WCN6750/hw1.0/wpss.mdt
/lib/firmware/ath11k/WCN6750/hw1.0/wpss.b00
/lib/firmware/ath11k/WCN6750/hw1.0/wpss.b05
/lib/firmware/ath11k/WCN6750/hw1.0/wpss.b06
/lib/firmware/ath11k/IPQ6018/hw1.0/q6_fw.b00
/lib/firmware/ath11k/IPQ6018/hw1.0/m3_fw.b00
/lib/firmware/ath11k/IPQ6018/hw1.0/q6_fw.mdt
/lib/firmware/ath11k/IPQ6018/hw1.0/m3_fw.mdt
/lib/firmware/ath11k/IPQ5018/hw1.0/q6_fw.b00
/lib/firmware/ath11k/IPQ5018/hw1.0/m3_fw.b00
/lib/firmware/ath11k/IPQ5018/hw1.0/q6_fw.mdt
/lib/firmware/ath11k/IPQ5018/hw1.0/m3_fw.mdt
/lib/firmware/ath12k/WCN7850/hw2.0/amss.bin
/lib/firmware/ath12k/WCN7850/hw2.0/m3.bin
/lib/firmware/qcom/vpu-1.0/venus.mbn
/lib/firmware/qcom/venus-1.8/venus.mbn
/lib/firmware/qcom/venus-5.4/venus.mbn
/lib/firmware/qcom/sc8280xp/LENOVO/21BX/qcdxkmsuc8280.mbn
/lib/firmware/qcom/sc8280xp/LENOVO/21BX/qcadsp8280.mbn
/lib/firmware/qcom/sc8280xp/LENOVO/21BX/qcslpi8280.mbn
/lib/firmware/qcom/sc8280xp/LENOVO/21BX/qccdsp8280.mbn
/lib/firmware/qcom/venus-4.2/venus.mbn
/lib/firmware/qcom/sm8250/cdsp.mbn
/lib/firmware/qcom/sm8250/Thundercomm/RB5/slpi.mbn
/lib/firmware/qcom/sm8250/a650_zap.mbn
/lib/firmware/qcom/sm8250/adsp.mbn
/lib/firmware/qcom/apq8096/mba.mbn
/lib/firmware/qcom/apq8096/a530_zap.mbn
/lib/firmware/qcom/apq8096/adsp.mbn
/lib/firmware/qcom/apq8096/modem.mbn
/lib/firmware/qcom/venus-6.0/venus.mbn
/lib/firmware/qcom/vpu-2.0/venus.mbn
/lib/firmware/qcom/apq8016/mba.mbn
/lib/firmware/qcom/apq8016/wcnss.mbn
/lib/firmware/qcom/apq8016/modem.mbn
/lib/firmware/qcom/venus-5.2/venus.mbn
/lib/firmware/qcom/sdm845/cdsp.mbn
/lib/firmware/qcom/sdm845/Thundercomm/db845c/slpi.mbn
/lib/firmware/qcom/sdm845/mba.mbn
/lib/firmware/qcom/sdm845/modem_nm.mbn
/lib/firmware/qcom/sdm845/a630_zap.mbn
/lib/firmware/qcom/sdm845/adsp.mbn
/lib/firmware/qcom/qrb4210/cdsp.mbn
/lib/firmware/qcom/qrb4210/a610_zap.mbn
/lib/firmware/qcom/qrb4210/adsp.mbn
/lib/firmware/qcom/qrb4210/modem.mbn
/lib/firmware/qcom/qcm2290/a702_zap.mbn
/lib/firmware/qcom/qcm2290/adsp.mbn
/lib/firmware/qcom/qcm2290/modem.mbn
/lib/firmware/mediatek/mt8195/scp.img
/lib/firmware/mediatek/mt8192/scp.img
/lib/firmware/mediatek/mt8186/scp.img
/lib/firmware/mediatek/mt8183/scp.img
/lib/firmware/ath10k/WCN3990/hw1.0/qcm2290/wlanmdsp.mbn
/lib/firmware/ath10k/WCN3990/hw1.0/wlanmdsp.mbn
/lib/firmware/nvidia/ga102/gsp/gsp-535.113.01.bin
/lib/firmware/nvidia/tu102/gsp/gsp-535.113.01.bin
/lib/firmware/qca/msbtfw11.mbn

>>> Messages generated by process 22870 on 2024-06-16 18:20:25 BST for package app-text/asciidoc-10.2.0:

QA: install
QA Notice: setuptools warnings detected:

	Package 'asciidoc.resources' is absent from the `packages` configuration.
	Package 'asciidoc.resources.dblatex' is absent from the `packages` configuration.
	Package 'asciidoc.resources.filters' is absent from the `packages` configuration.
	Package 'asciidoc.resources.filters.code' is absent from the `packages` configuration.
	Package 'asciidoc.resources.filters.graphviz' is absent from the `packages` configuration.
	Package 'asciidoc.resources.filters.latex' is absent from the `packages` configuration.
	Package 'asciidoc.resources.filters.music' is absent from the `packages` configuration.
	Package 'asciidoc.resources.filters.source' is absent from the `packages` configuration.
	Package 'asciidoc.resources.icons' is absent from the `packages` configuration.
	Package 'asciidoc.resources.icons.callouts' is absent from the `packages` configuration.
	Package 'asciidoc.resources.javascripts' is absent from the `packages` configuration.
	Package 'asciidoc.resources.stylesheets' is absent from the `packages` configuration.
	Package 'asciidoc.resources.themes.flask' is absent from the `packages` configuration.
	Package 'asciidoc.resources.themes.volnitsky' is absent from the `packages` configuration.
LOG: postinst
If you are going to use a2x, please also look at a2x(1) under
REQUISITES for a list of runtime dependencies.

(Note: Above message is only printed the first time package is
installed. Please look at /usr/share/doc/asciidoc-10.2.0/README.gentoo*
for future reference)
Install additional packages for optional runtime features:
  media-sound/lilypond and virtual/imagemagick-tools for music filter support
  dev-util/source-highlight and dev-python/pygments and app-text/highlight for source filter support
  dev-texlive/texlive-latex and app-text/dvipng for latex filter support
  dev-texlive/texlive-latex and app-text/dvisvgm for latex filter support
  media-gfx/graphviz for graphviz filter support

>>> Messages generated by process 22870 on 2024-06-16 18:20:35 BST for package sys-kernel/dracut-060_pre20240104-r4:

LOG: postinst
Install additional packages for optional runtime features:
  net-misc/networkmanager for Networking support
  sys-fs/btrfs-progs for Scan for Btrfs on block devices
  net-fs/cifs-utils for Support CIFS
  sys-fs/cryptsetup[-static-libs] for Decrypt devices encrypted with cryptsetup/LUKS
  app-shells/dash for Allows use of dash instead of default bash (on your own risk)
  sys-apps/busybox for Allows use of busybox instead of default bash (on your own risk)
  sys-block/open-iscsi for Support iSCSI
  sys-fs/lvm2[lvm] for Support Logical Volume Manager
  sys-fs/mdadm for Support MD devices, also known as software RAID devices
  sys-fs/dmraid for Support MD devices, also known as software RAID devices
  sys-fs/multipath-tools for Support Device Mapper multipathing
  >=sys-boot/plymouth-0.8.5-r5 for Plymouth boot splash
  sys-block/nbd for Support network block devices
  net-fs/nfs-utils for Support NFS
  net-nds/rpcbind for Support NFS
  app-admin/rsyslog for Enable logging with rsyslog
  sys-fs/squashfs-tools for Support Squashfs
  app-crypt/tpm2-tools for Support TPM 2.0 TSS
  net-wireless/bluez for Support Bluetooth (experimental)
  sys-apps/biosdevname for Support BIOS-given device names
  sys-apps/nvme-cli for Support network NVMe
  app-misc/jq for Support network NVMe
  sys-apps/rng-tools for Enable rngd service to help generating entropy early during boot
  sys-kernel/installkernel[dracut] for automatically generating an initramfs on each kernel installation

>>> Messages generated by process 9677 on 2024-06-16 18:40:30 BST for package acct-group/cron-0-r2:

LOG: preinst
Adding group cron

>>> Messages generated by process 9677 on 2024-06-16 18:40:34 BST for package acct-group/crontab-0-r2:

LOG: preinst
Adding group crontab

>>> Messages generated by process 9677 on 2024-06-16 18:40:47 BST for package acct-user/cron-0-r3:

LOG: preinst
Adding user cron

>>> Messages generated by process 9677 on 2024-06-16 18:40:51 BST for package sys-process/cronbase-0.3.7-r10:

LOG: postinst
To add a user to the cron group so it can create cron jobs, run:
usermod -a -G cron <user> For more information, visit the wiki page:
https://wiki.gentoo.org/wiki/Cron

(Note: Above message is only printed the first time package is
installed. Please look at /usr/share/doc/cronbase-0.3.7-r10/README.gentoo*
for future reference)

>>> Messages generated by process 23671 on 2024-06-16 18:43:25 BST for package acct-group/ntp-0-r3:

LOG: preinst
Adding group ntp

>>> Messages generated by process 23671 on 2024-06-16 18:43:29 BST for package acct-user/ntp-0-r3:

LOG: preinst
Adding user ntp

>>> Messages generated by process 23671 on 2024-06-16 18:43:49 BST for package net-misc/chrony-4.5:

LOG: postinst
To enable seccomp in a stricter mode, please modify:
- /etc/conf.d/chronyd for OpenRC
- systemctl edit chronyd for systemd
to use -F 1 or -F -1 instead of -F 2 (see man chronyd)
By default, we now use -F 2 which is a baseline/minimal filter.

>>> Messages generated by process 11134 on 2024-06-16 18:46:24 BST for package app-text/mandoc-1.14.6:

QA: other
QA Notice: Found the following implicit function declarations in configure logs:
  /var/tmp/portage/app-text/mandoc-1.14.6/work/mandoc-1.14.6/config.log:154 - pledge
  /var/tmp/portage/app-text/mandoc-1.14.6/work/mandoc-1.14.6/config.log:173 - getprogname
  /var/tmp/portage/app-text/mandoc-1.14.6/work/mandoc-1.14.6/config.log:191 - recallocarray
  /var/tmp/portage/app-text/mandoc-1.14.6/work/mandoc-1.14.6/config.log:202 - recallocarray
  /var/tmp/portage/app-text/mandoc-1.14.6/work/mandoc-1.14.6/config.log:258 - strptime
  /var/tmp/portage/app-text/mandoc-1.14.6/work/mandoc-1.14.6/config.log:282 - strtonum
  /var/tmp/portage/app-text/mandoc-1.14.6/work/mandoc-1.14.6/config.log:293 - strtonum
  /var/tmp/portage/app-text/mandoc-1.14.6/work/mandoc-1.14.6/config.log:337 - wcwidth
Check that no features were accidentally disabled.
See https://wiki.gentoo.org/wiki/Modern_C_porting.

>>> Messages generated by process 11134 on 2024-06-16 18:49:56 BST for package sys-boot/grub-2.12-r4:

LOG: postinst
For information on how to configure GRUB2 please refer to the guide:
    https://wiki.gentoo.org/wiki/GRUB2_Quick_Start

Install additional packages for optional runtime features:
  sys-boot/os-prober for detecting other operating systems (grub-mkconfig)
  dev-libs/libisoburn for creating rescue media (grub-mkrescue)
  sys-fs/mdadm for enabling RAID device detection
  sys-kernel/installkernel[grub] for automatically updating GRUB's configuration on each kernel installation
QA: other
QA Notice: Problems with installed bash completions were found:

	grub: does not define any completions (failed to source?).

For more details on installing bash-completions, please see:
https://wiki.gentoo.org/wiki/Bash/Installing_completion_files


>>> Messages generated by process 23872 on 2024-06-16 18:52:18 BST for package sys-boot/grub-2.12-r4:

LOG: postinst
For information on how to configure GRUB2 please refer to the guide:
    https://wiki.gentoo.org/wiki/GRUB2_Quick_Start
QA: other
QA Notice: Problems with installed bash completions were found:

	grub: does not define any completions (failed to source?).

For more details on installing bash-completions, please see:
https://wiki.gentoo.org/wiki/Bash/Installing_completion_files


>>> Messages generated by process 21499 on 2024-06-16 18:55:33 BST for package sys-boot/os-prober-1.81-r3:

LOG: postinst
If you intend for os-prober to detect versions of Windows installed
on NTFS-formatted partitions, your system must be capable of reading
the NTFS filesystem. One way to do this is by installing
sys-fs/ntfs3g. NOTE: Since sys-boot/grub-2.06-rc1, grub-mkconfig
disables os-prober by default. To enable it, add
GRUB_DISABLE_OS_PROBER=false to /etc/default/grub.

(Note: Above message is only printed the first time package is
installed. Please look at /usr/share/doc/os-prober-1.81-r3/README.gentoo*
for future reference)

>>> Messages generated by process 25554 on 2024-06-16 19:26:30 BST for package sys-kernel/gentoo-kernel-bin-6.6.32:

LOG: postinst
/usr/src/linux points at another kernel, leaving it as-is.
Please use 'eselect kernel' to update it when desired.

>>> Messages generated by process 28577 on 2024-06-16 23:29:01 BST for package acct-group/nullmail-0-r2:

LOG: preinst
Adding group nullmail

>>> Messages generated by process 28577 on 2024-06-16 23:29:05 BST for package acct-user/nullmail-0-r2:

LOG: preinst
Adding user nullmail

>>> Messages generated by process 28577 on 2024-06-16 23:29:22 BST for package mail-mta/nullmailer-2.2-r2:

LOG: postinst
To create an initial setup, please do:
emerge --config =mail-mta/nullmailer-2.2-r2
QA: other
QA Notice: system executables owned by nonzero uid:
  /usr/bin/mailq
  /usr/sbin/nullmailer-queue

>>> Messages generated by process 28577 on 2024-06-16 23:29:59 BST for package app-admin/sudo-1.9.15_p5:

LOG: postinst
To use the -A (askpass) option, you need to install a compatible
password program from the following list. Starred packages will
automatically register for the use with sudo (but will not force
the -A option):

 [*] net-misc/ssh-askpass-fullscreen
     net-misc/x11-ssh-askpass

You can override the choice by setting the SUDO_ASKPASS environmnent
variable to the program you want to use.