API tools faq
paste
Advertisement
Guest User

breed r647 + 官方固件 (Archer C7 v2 150304) TTL输出

a guest
Jul 27th, 2015
521
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 28.98 KB | None | 0 0
raw download clone embed print report
  1. Boot and Recovery Environment for Embedded Devices
  2. Copyright (C) 2015 HackPascal <hackpascal@gmail.com>
  3. Build date 2015-07-19 [git-6be20b6]
  4. Version 1.0 (r647)
  5.  
  6. DRAM: 128MB
  7. Platform: Qualcomm Atheros QCA9558 rev 0
  8. Board: Atheros AP152 reference board
  9. Clocks: CPU: 720MHz, DDR: 600MHz, AHB: 200MHz, Ref: 40MHz
  10. Flash: Winbond W25Q128 (16MB) on ath79-spi
  11. ag71xx-eth: Using MAC address ea:37:cb:f1:0f:e8
  12. eth0: Atheros AR8327/AR8328 rev 4
  13.  
  14. Network started on eth0, inet addr 192.168.1.1, netmask 255.255.255.0
  15.  
  16. Press any key to interrupt autoboot ... 0
  17.  
  18. Trying to boot firmware from 0x9f020000 ...
  19. TP-LINK firmware image header detected.
  20. Image Name: 75000003
  21. Data Size: 1034180 Bytes
  22. Load Address: 80060000
  23. Entry Point: 80060000
  24. Uncompressing data (LZMA) ... done.
  25. Flushing cache ... done.
  26.  
  27. Starting kernel at 0x80060000...
  28.  
  29. [ 0.000000] Linux version 3.10.36 (compile@tc_128_166) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r41355) ) #5 Sun Jun 29 11:35:20 CST 2014
  30. [ 0.000000] bootconsole [early0] enabled
  31. [ 0.000000] CPU revision is: 00019750 (MIPS 74Kc)
  32. [ 0.000000] SoC: Qualcomm Atheros QCA9558 rev 0
  33. [ 0.000000] Clocks: CPU:720.000MHz, DDR:600.000MHz, AHB:200.000MHz, Ref:40.000MHz
  34. [ 0.000000] Determined physical RAM map:
  35. [ 0.000000] memory: 08000000 @ 00000000 (usable)
  36. [ 0.000000] Initrd not found or empty - disabling initrd
  37. [ 0.000000] Zone ranges:
  38. [ 0.000000] Normal [mem 0x00000000-0x07ffffff]
  39. [ 0.000000] Movable zone start for each node
  40. [ 0.000000] Early memory node ranges
  41. [ 0.000000] node 0: [mem 0x00000000-0x07ffffff]
  42. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  43. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  44. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
  45. [ 0.000000] Kernel command line: board=ARCHER-C7 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
  46. [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  47. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  48. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  49. [ 0.000000] Writing ErrCtl register=00000000
  50. [ 0.000000] Readback ErrCtl register=00000000
  51. [ 0.000000] Memory: 126248k/131072k available (2217k kernel code, 4824k reserved, 592k data, 260k init, 0k highmem)
  52. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  53. [ 0.000000] NR_IRQS:51
  54. [ 0.000000] Calibrating delay loop... 358.80 BogoMIPS (lpj=1794048)
  55. [ 0.060000] pid_max: default: 32768 minimum: 301
  56. [ 0.060000] Mount-cache hash table entries: 512
  57. [ 0.070000] NET: Registered protocol family 16
  58. [ 0.070000] MIPS: machine is TP-LINK Archer C7
  59. [ 0.080000] ar724x-pci ar724x-pci.0: PCIe link is down
  60. [ 0.080000] registering PCI controller with io_map_base unset
  61. [ 0.090000] ar724x-pci ar724x-pci.1: PCIe link is down
  62. [ 0.090000] registering PCI controller with io_map_base unset
  63. [ 0.500000] bio: create slab <bio-0> at 0
  64. [ 0.510000] PCI host bridge to bus 0000:00
  65. [ 0.510000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x11ffffff]
  66. [ 0.520000] pci_bus 0000:00: root bus resource [io 0x0000]
  67. [ 0.520000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  68. [ 0.530000] PCI host bridge to bus 0000:01
  69. [ 0.530000] pci_bus 0000:01: root bus resource [mem 0x12000000-0x13ffffff]
  70. [ 0.540000] pci_bus 0000:01: root bus resource [io 0x0001]
  71. [ 0.540000] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
  72. [ 0.550000] Switching to clocksource MIPS
  73. [ 0.550000] NET: Registered protocol family 2
  74. [ 0.560000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  75. [ 0.560000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  76. [ 0.570000] TCP: Hash tables configured (established 1024 bind 1024)
  77. [ 0.570000] TCP: reno registered
  78. [ 0.580000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  79. [ 0.580000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  80. [ 0.590000] NET: Registered protocol family 1
  81. [ 0.600000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  82. [ 0.610000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  83. [ 0.620000] msgmni has been set to 246
  84. [ 0.620000] io scheduler noop registered
  85. [ 0.630000] io scheduler deadline registered (default)
  86. [ 0.630000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  87. [ 0.660000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
  88. [ 0.670000] console [ttyS0] enabled, bootconsole disabled
  89. [ 0.670000] console [ttyS0] enabled, bootconsole disabled
  90. [ 0.680000] ath79-spi ath79-spi: master is unqueued, this is deprecated
  91. [ 0.690000] m25p80 spi0.0: found w25q128, expected m25p80
  92. [ 0.690000] m25p80 spi0.0: w25q128 (16384 Kbytes)
  93. [ 0.700000] 5 tp-link partitions found on MTD device spi0.0
  94. [ 0.700000] Creating 5 MTD partitions on "spi0.0":
  95. [ 0.710000] 0x000000000000-0x000000020000 : "u-boot"
  96. [ 0.710000] 0x000000020000-0x00000011c9c4 : "kernel"
  97. [ 0.720000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  98. [ 0.730000] 0x00000011c9c4-0x000000ff0000 : "rootfs"
  99. [ 0.740000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  100. [ 0.750000] mtd: device 2 (rootfs) set to be root filesystem
  101. [ 0.760000] 1 squashfs-split partitions found on MTD device rootfs
  102. [ 0.760000] 0x000000380000-0x000000ff0000 : "rootfs_data"
  103. [ 0.770000] 0x000000ff0000-0x000001000000 : "art"
  104. [ 0.780000] 0x000000020000-0x000000ff0000 : "firmware"
  105. [ 0.810000] switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-mdio.0
  106. [ 2.060000] libphy: ag71xx_mdio: probed
  107. [ 2.610000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316]
  108. [ 2.620000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
  109. [ 3.180000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:SGMII
  110. [ 3.190000] TCP: cubic registered
  111. [ 3.190000] NET: Registered protocol family 17
  112. [ 3.190000] 8021q: 802.1Q VLAN Support v1.8
  113. [ 3.200000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  114. [ 3.210000] Freeing unused kernel memory: 260K (8031f000 - 80360000)
  115. procd: Console is alive
  116. procd: - watchdog -
  117. procd: - preinit -
  118. [ 5.850000] eth1: link up (1000Mbps/Full duplex)
  119. [ 5.960000] usbcore: registered new interface driver usbfs
  120. [ 5.960000] usbcore: registered new interface driver hub
  121. [ 5.980000] usbcore: registered new device driver usb
  122. [ 5.980000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  123. [ 6.000000] ehci-platform: EHCI generic platform driver
  124. [ 6.000000] ehci-platform ehci-platform.0: EHCI Host Controller
  125. [ 6.010000] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
  126. [ 6.020000] ehci-platform ehci-platform.0: TX-TX IDP fix enabled
  127. [ 6.020000] ehci-platform ehci-platform.0: irq 48, io mem 0x1b000000
  128. Press the [f] key and hit [enter] to enter failsafe mode
  129. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  130. [ 6.050000] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
  131. [ 6.060000] hub 1-0:1.0: USB hub found
  132. [ 6.060000] hub 1-0:1.0: 1 port detected
  133. [ 6.060000] ehci-platform ehci-platform.1: EHCI Host Controller
  134. [ 6.070000] ehci-platform ehci-platform.1: new USB bus registered, assigned bus number 2
  135. [ 6.080000] ehci-platform ehci-platform.1: TX-TX IDP fix enabled
  136. [ 6.090000] ehci-platform ehci-platform.1: irq 49, io mem 0x1b400000
  137. [ 6.110000] ehci-platform ehci-platform.1: USB 2.0 started, EHCI 1.00
  138. [ 6.110000] hub 2-0:1.0: USB hub found
  139. [ 6.120000] hub 2-0:1.0: 1 port detected
  140. jffs2 is ready
  141. [ 9.270000] jffs2: notice: (338) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 18 of xref (0 dead, 2 orphan) found.
  142. switching to jffs2
  143. [ 9.290000] eth1: link down
  144. procd: - early -
  145. procd: - watchdog -
  146. procd: - ubus -
  147. procd: - init -
  148. Please press Enter to activate this console.
  149. [ 10.560000] NET: Registered protocol family 10
  150. [ 10.570000] nf_conntrack version 0.5.0 (1976 buckets, 7904 max)
  151. [ 10.580000] ip6_tables: (C) 2000-2006 Netfilter Core Team
  152. [ 10.600000] Loading modules backported from Linux version master-2014-03-31-1-0-g5c109d2
  153. [ 10.610000] Backport generated by backports.git backports-20140221-0-g8e94650
  154. [ 10.640000] cfg80211: Calling CRDA to update world regulatory domain
  155. [ 10.660000] cfg80211: World regulatory domain updated:
  156. [ 10.660000] cfg80211: DFS Master region: unset
  157. [ 10.660000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  158. [ 10.670000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  159. [ 10.680000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  160. [ 10.690000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  161. [ 10.700000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  162. [ 10.710000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  163. [ 10.720000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  164. [ 10.760000] ip_tables: (C) 2000-2006 Netfilter Core Team
  165. [ 10.800000] xt_time: kernel timezone is -0000
  166. [ 10.810000] PPP generic driver version 2.4.2
  167. [ 10.820000] NET: Registered protocol family 24
  168. [ 10.850000] ieee80211 phy0: Atheros AR9550 Rev:0 mem=0xb8100000, irq=47
  169. [ 10.880000] cfg80211: Calling CRDA for country: US
  170. [ 10.880000] cfg80211: Regulatory domain changed to country: US
  171. [ 10.890000] cfg80211: DFS Master region: FCC
  172. [ 10.890000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  173. [ 10.900000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
  174. [ 10.910000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
  175. [ 10.920000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
  176. [ 10.930000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
  177. [ 10.930000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
  178. procd: - init complete -
  179. [ 17.380000] eth1: link up (1000Mbps/Full duplex)
  180. [ 17.380000] device eth1 entered promiscuous mode
  181. [ 17.390000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  182. [ 17.400000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  183. [ 18.380000] br-lan: port 1(eth1) entered forwarding state
  184. [ 18.380000] br-lan: port 1(eth1) entered forwarding state
  185. [ 18.390000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  186. [ 18.760000] eth0: link up (1000Mbps/Full duplex)
  187. [ 18.780000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  188. [ 20.380000] br-lan: port 1(eth1) entered forwarding state
  189. procd: - shutdown -
  190. [ 479.620000] br-lan: port 1(eth1) entered disabled state
  191. [ 479.620000] device eth1 left promiscuous mode
  192. [ 479.630000] br-lan: port 1(eth1) entered disabled state
  193. [ 479.630000] eth1: link down
  194. [ 479.650000] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
  195. procd: - reboot -
  196. [ 479.910000] Removing MTD device #3 (rootfs_data) with use count 1
  197. [ 479.920000] Restarting system.
  198.  
  199. Boot and Recovery Environment for Embedded Devices
  200. Copyright (C) 2015 HackPascal <hackpascal@gmail.com>
  201. Build date 2015-07-19 [git-6be20b6]
  202. Version 1.0 (r647)
  203.  
  204. DRAM: 128MB
  205. Platform: Qualcomm Atheros QCA9558 rev 0
  206. Board: Atheros AP152 reference board
  207. Clocks: CPU: 720MHz, DDR: 600MHz, AHB: 200MHz, Ref: 40MHz
  208. Flash: Winbond W25Q128 (16MB) on ath79-spi
  209. ag71xx-eth: Using MAC address ea:37:cb:f1:0f:e8
  210. eth0: Atheros AR8327/AR8328 rev 4
  211.  
  212. Network started on eth0, inet addr 192.168.1.1, netmask 255.255.255.0
  213.  
  214. Press any key to interrupt autoboot ... 4x
  215. Auto boot aborted.
  216.  
  217. Starting breed built-in shell
  218.  
  219. breed> xxxxxxx@sFaOd^@qGwD4?4??^OsFd^S
  220. Upgrade completed.
  221. Rebooting in 2 seconds ...
  222. Resetting ...
  223. Boot and Recovery Environment for Embedded Devices
  224. Copyright (C) 2015 HackPascal <hackpascal@gmail.com>
  225. Build date 2015-07-19 [git-6be20b6]
  226. Version 1.0 (r647)
  227.  
  228. DRAM: 128MB
  229. Platform: Qualcomm Atheros QCA9558 rev 0
  230. Board: Atheros AP152 reference board
  231. Clocks: CPU: 720MHz, DDR: 600MHz, AHB: 200MHz, Ref: 40MHz
  232. Flash: Winbond W25Q128 (16MB) on ath79-spi
  233. ag71xx-eth: Using MAC address ea:37:cb:f1:0f:e8
  234. eth0: Atheros AR8327/AR8328 rev 4
  235.  
  236. Network started on eth0, inet addr 192.168.1.1, netmask 255.255.255.0
  237.  
  238. Press any key to interrupt autoboot ... 0
  239.  
  240. Trying to boot firmware from 0x9f020000 ...
  241. TP-LINK firmware image header detected.
  242. Image Name: c7000002
  243. Data Size: 855048 Bytes
  244. Load Address: 80002000
  245. Entry Point: 801c7b50
  246. Uncompressing data (LZMA) ... done.
  247. Flushing cache ... done.
  248.  
  249. Starting kernel at 0x801c7b50...
  250.  
  251. Booting QCA955x
  252. [ 0.000000] Linux version 2.6.31--LSDK-9.2.0_U6.616 (root@liaozhiming) (gcc version 4.3.3 (GCC) ) #1 Wed Mar 4 16:03:08 CST 2015
  253. [ 0.000000] Ram size passed from bootloader =128M
  254. [ 0.000000] flash_size passed from bootloader = 16
  255. [ 0.000000] CPU revision is: 00019750 (MIPS 74Kc)
  256. [ 0.000000] cpu apb ddr apb ath_sys_frequency: cpu 720 ddr 600 ahb 200
  257. [ 0.000000] Determined physical RAM map:
  258. [ 0.000000] memory: 08000000 @ 00000000 (usable)
  259. [ 0.000000] Zone PFN ranges:
  260. [ 0.000000] Normal 0x00000000 -> 0x00008000
  261. [ 0.000000] Movable zone start PFN for each node
  262. [ 0.000000] early_node_map[1] active PFN ranges
  263. [ 0.000000] 0: 0x00000000 -> 0x00008000
  264. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
  265. [ 0.000000] Kernel command line: console=ttyS0,115200 root=31:02 rootfstype=squashfs init=/sbin/init mtdparts=ath-nor0:128k(u-boot),1024k(kernel),14848k(rootfs),320k(config),64k(ART) mem=128M
  266. [ 0.000000] PID hash table entries: 512 (order: 9, 2048 bytes)
  267. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  268. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  269. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  270. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  271. [ 0.000000] Writing ErrCtl register=00000000
  272. [ 0.000000] Readback ErrCtl register=00000000
  273. [ 0.000000] Memory: 112924k/131072k available (1843k kernel code, 17980k reserved, 430k data, 120k init, 0k highmem)
  274. [ 0.000000] NR_IRQS:128
  275. [ 0.000000] plat_time_init: plat time init done
  276. [ 0.000000] Calibrating delay loop... 359.42 BogoMIPS (lpj=718848)
  277. [ 0.080000] Mount-cache hash table entries: 512
  278. [ 0.080000]
  279. [ 0.080000] ****************ALLOC***********************
  280. [ 0.080000] Packet mem: 8026a4e0 (0xe00000 bytes)
  281. [ 0.080000] ********************************************
  282. [ 0.080000]
  283. [ 0.080000] NET: Registered protocol family 16
  284. [ 0.080000] ath_pcibios_init: bus 0
  285. [ 0.080000] ***** Warning PCIe 0 H/W not found !!!
  286. [ 0.080000] registering PCI controller with io_map_base unset
  287. [ 0.080000] ath_pcibios_init: bus 1
  288. [ 0.080000] ***** Warning PCIe 1 H/W not found !!!
  289. [ 0.080000] registering PCI controller with io_map_base unset
  290. [ 0.080000] ===@@@@@@@@@@@=>use GPIO13 as wifi button control!
  291. [ 0.080000] bio: create slab <bio-0> at 0
  292. [ 0.080000] NET: Registered protocol family 2
  293. [ 0.080000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  294. [ 0.080000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  295. [ 0.084000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
  296. [ 0.084000] TCP: Hash tables configured (established 4096 bind 4096)
  297. [ 0.084000] TCP reno registered
  298. [ 0.084000] NET: Registered protocol family 1
  299. [ 0.084000] ATH GPIOC major 0
  300. [ 0.084000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  301. [ 0.084000] msgmni has been set to 220
  302. [ 0.084000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
  303. [ 0.084000] io scheduler noop registered
  304. [ 0.084000] io scheduler deadline registered (default)
  305. [ 0.084000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  306. [ 0.084000] serial8250.0: ttyS0 at MMIO 0xb8020000 (irq = 19) is a 16550A
  307. [ 0.084000] console [ttyS0] enabled
  308. [ 0.392000] PPP generic driver version 2.4.2
  309. [ 0.396000] NET: Registered protocol family 24
  310. [ 0.400000] 5 cmdlinepart partitions found on MTD device ath-nor0
  311. [ 0.404000] Creating 5 MTD partitions on "ath-nor0":
  312. [ 0.412000] 0x000000000000-0x000000020000 : "u-boot"
  313. [ 0.416000] 0x000000020000-0x000000120000 : "kernel"
  314. [ 0.420000] 0x000000120000-0x000000fa0000 : "rootfs"
  315. [ 0.428000] 0x000000fa0000-0x000000ff0000 : "config"
  316. [ 0.432000] 0x000000ff0000-0x000001000000 : "ART"
  317. [ 0.436000] ->Oops: flash id 0xef4018 .
  318. [ 0.440000] Ooops, why the devices couldn't been initialed?
  319. [ 0.448000] TCP cubic registered
  320. [ 0.452000] NET: Registered protocol family 10
  321. [ 0.456000] NET: Registered protocol family 17
  322. [ 0.460000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
  323. [ 0.468000] All bugs added by David S. Miller <davem@redhat.com>
  324. [ 0.472000] athwdt_init: Registering WDT success
  325. [ 0.476000] ath_otp_init: Registering OTP success
  326. [ 0.484000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  327. [ 0.492000] Freeing unused kernel memory: 120k freed
  328. init started: BusyBox v1.01 (2014.12.08-06:50+0000) multi-call binary
  329. This Board use 2.6.31
  330. [ 1.588000] xt_time: kernel timezone is -0000
  331. [ 1.756000] nf_conntrack version 0.5.0 (2048 buckets, 81920 max)
  332. [ 1.760000] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
  333. [ 1.768000] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
  334. [ 1.776000] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
  335. [ 2.132000] ip_tables: (C) 2000-2006 Netfilter Core Team
  336. insmod: cannot open module `/lib/modules/2.6.31/kernel/iptable_raw.ko': No such file or directory
  337. insmod: cannot open module `/lib/modules/2.6.31/kernel/igmp_agent.ko': No such file or directory
  338. insmod: cannot open module `/lib/modules/2.6.31/kernel/flashid.ko': No such file or directory
  339. [ 2.404000] PPPoL2TP kernel driver, V1.0
  340. [ 2.420000] PPTP driver version 0.8.3
  341. insmod: cannot open module `/lib/modules/2.6.31/kernel/harmony.ko': No such file or directory
  342.  
  343. (none) mips #1 Wed Mar 4 16:03:08 CST 2015 (none)
  344. (none) login: [ 6.120000] Read from 0X20000 to 0X20120: OK
  345. [ 6.208000] Read from 0XFA0000 to 0XFB1CA8: OK
  346. [ 6.240000] Read from 0X1FC00 to 0X1FC06: OK
  347. [ 6.408000] Read from 0X1FE00 to 0X1FE08: OK
  348. [ 6.412000] Erase from 0XFA0000 to 0XFB1CA8:.
  349. [ 6.660000] Program from 0XFA0000 to 0XFB1CA8:.
  350. [ 7.108000] write successfully
  351. [ 7.112000] Read from 0X1FE00 to 0X1FE08: OK
  352. [ 7.116000] Erase from 0XFA0000 to 0XFB1CA8:.
  353. [ 7.376000] Program from 0XFA0000 to 0XFB1CA8:.
  354. [ 7.840000] write successfully
  355. [ 7.844000] Erase from 0XFA0000 to 0XFB1CA8:.
  356. [ 8.100000] Program from 0XFA0000 to 0XFB1CA8:.
  357. [ 8.540000] write successfully
  358. [ucVlanCfg_init, 92]Prepare paramter:vlanEntry_0=0x00000000
  359.  
  360. [ucVlanCfg_init, 92]Prepare paramter:vlanEntry_1=0x00000000
  361.  
  362. [ucVlanCfg_init, 92]Prepare paramter:vlanEntry_2=0x00000000
  363.  
  364. [ucVlanCfg_init, 92]Prepare paramter:vlanEntry_3=0x00000000
  365.  
  366. [ucVlanCfg_init, 95]VLAN CFG PARAM STR:vlanEnable=0 vlanEntry_0=0 vlanEntry_1=0 vlanEntry_2=0 vlanEntry_3=0
  367.  
  368. [ 8.936000] qca955x_GMAC: Length per segment 1536
  369. [ 8.944000] 955x_GMAC: qca955x_gmac_attach
  370. [ 8.948000] 955x_GMAC: qca955x_set_gmac_caps
  371. [ 8.952000] Currently in polling mode unit1
  372. [ 8.956000] mac:1 Registering S17....
  373. [ 8.960000] qca955x_GMAC: RX TASKLET - Pkts per Intr:200
  374. [ 8.964000] qca955x_GMAC: Max segments per packet : 1
  375. [ 8.972000] qca955x_GMAC: Max tx descriptor count : 220
  376. [ 8.976000] qca955x_GMAC: Max rx descriptor count : 220
  377. [ 8.980000] qca955x_GMAC: Mac capability flags : 12002200
  378. [ 8.988000] 955x_GMAC: qca955x_gmac_attach
  379. [ 8.992000] 955x_GMAC: qca955x_set_gmac_caps
  380. [ 8.996000] Currently in polling mode unit0
  381. [ 9.000000] mac:0 Registering S17....
  382. [ 9.004000] qca955x_GMAC: RX TASKLET - Pkts per Intr:200
  383. [ 9.008000] qca955x_GMAC: Max segments per packet : 1
  384. [ 9.016000] qca955x_GMAC: Max tx descriptor count : 220
  385. [ 9.020000] qca955x_GMAC: Max rx descriptor count : 220
  386. [ 9.024000] qca955x_GMAC: Mac capability flags : 10002A00
  387. [ 9.032000] 955x_GMAC: Serdes PLL is locked value 0x1f038116
  388. [ 9.644000] athr_gmac_ring_alloc Allocated 3520 at 0x8794f000
  389. [ 9.652000] athr_gmac_ring_alloc Allocated 3520 at 0x87aa1000
  390. [ 9.956000] 955x_GMAC: eth1 in SGMII MODE
  391. [ 9.960000] Scorpion -----> S17 PHY
  392. [ 9.992000] Hello, nat helper module for 1.08!
  393. [ 9.996000] netlink_kernel_create succeeded at tp_rule_nl_prot: [29]
  394. [ 10.000000]
  395. [ 10.000000] ######## S17 SSDK init succeeded! ########
  396. [ 10.008000] _athrs17_mac0_intf SGMII done
  397. [ 10.016000] [VLAN_CONFIG] vlanEnable:Disable
  398. [ 10.020000] [VLAN_CONFIG] Aborting VLAN CONFIG!
  399. [ 10.028000] athrs17_reg_init:done
  400. [ 10.032000] 955x_SGMII::athr_gmac_sgmii_setup Done
  401. [ 10.036000] Setting Drop CRC Errors, Pause Frames and Length Error frames
  402. [ 10.044000] Setting PHY...
  403. [ 11.048000] Phy setup Complete
  404. [ 11.052000] ADDRCONF(NETDEV_UP): eth0: link is not ready
  405. [ 11.116000] device eth0.1 entered promiscuous mode
  406. [ 11.120000] device eth0 entered promiscuous mode
  407. [ 11.132000] Read from 0X1FC00 to 0X1FC06: OK
  408. [ 11.136000] SET INTF MAC 0:ec-26-ca-f0-0e-c8
  409. [ 11.144000] Lan UDP checksum 0 adding rule #3
  410. [ 11.148000] ACL is not yet enabled. Enabling...
  411. [ 11.156000] SET INTF MAC 1:ec-26-ca-f0-0e-c9
  412. [ 11.160000] ttl adding rule #0
  413. [ 11.164000] Wan UDP checksum 0 adding rule #2
  414. [ 11.232000] br0: port 1(eth0.1) entering forwarding state
  415. [ 12.412000] Adding ACL rules #1 - wan to lan, dst ip is lan net
  416. [ 12.880000] nf_conntrack_rtsp v0.6.21 loading
  417. [ 12.896000] nf_nat_rtsp v0.6.21 loading
  418. [ 12.936000] insmod nat_sip over !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  419. [ 13.088000] adf: module license 'Proprietary' taints kernel.
  420. [ 13.092000] Disabling lock debugging due to kernel taint
  421. [ 13.720000] ath_hal: 0.9.17.1 (AR5416, AR9380, REGOPS_FUNC, WRITE_EEPROM, TX_DATA_SWAP, RX_DATA_SWAP, 11D)
  422. [ 13.784000] ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
  423. usrconf_allocate_memory 212 shmget success id:43511 32769
  424. [ 13.876000] ath_dfs: Version 2.0.0
  425. [ 13.876000] Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
  426. [ 14.204000] ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
  427. [ 14.804000] Read from 0X20000 to 0X20120: OK
  428. [ 16.112000] ath_ahb: 10.2-00082-4 (Atheros/multi-bss)
  429. [ 16.120000] __ath_attach: Set global_scn[0]
  430. [ 16.132000] Enterprise mode: 0x43fc0000
  431. [ 16.136000] Restoring Cal data from Flash
  432. [ 16.140000] Green-AP : Green-AP : Attached
  433. [ 16.140000]
  434. [ 16.152000] ath_get_caps[6148] rx chainmask mismatch actual 7 sc_chainmak 0
  435. [ 16.160000] ath_get_caps[6123] tx chainmask mismatch actual 7 sc_chainmak 0
  436. [ 16.172000] ath_attach_dfs[12558] dfsdomain 1
  437. [ 16.196000] SC Callback Registration for wifi0
  438. [ 16.200000] wifi0: Atheros ???: mem=0xb8100000, irq=2
  439. [ 16.204000] ath_pci: 10.2-00082-4 (Atheros/multi-bss)
  440. [ 16.336000] ath_attach_dfs[12558] dfsdomain 1
  441. [ 16.396000] VAP device ath0 created
  442. [ 16.456000]
  443. [ 16.456000] DES SSID SET=TP-LINK_0EC8
  444. [ 16.468000] ieee80211_ioctl_siwmode: imr.ifm_active=131712, new mode=3, valid=1
  445. [ 16.476000] Set freq vap stop send + 86f74000
  446. [ 16.480000] Set freq vap stop send -86f74000
  447. [ 16.512000] Set wait done --86f74000
  448. [ 16.632000] Set freq vap stop send + 86f74000
  449. [ 16.636000] Set freq vap stop send -86f74000
  450. [ 16.668000] Set wait done --86f74000
  451. [ 21.972000] Scan in progress.. Cancelling it
  452. [ 22.592000] athr_gmac_ring_alloc Allocated 3520 at 0x87bcf000
  453. [ 22.596000] athr_gmac_ring_alloc Allocated 3520 at 0x87bf9000
  454. [ 22.904000] 955x_GMAC: eth0 in RGMII MODE
  455. [ 22.908000] Scorpion -----> S17 PHY
  456. [ 22.912000] athrs17_reg_init_wan done
  457. [ 22.916000] Setting Drop CRC Errors, Pause Frames and Length Error frames
  458. [ 22.924000] Setting PHY...
  459. [ 22.928000] ADDRCONF(NETDEV_UP): eth1: link is not ready
  460. [ 22.948000] device eth1 entered promiscuous mode
  461. [ 23.124000]
  462. [ 23.124000] Enet:1 port1 up
  463. [ 23.128000] 955x_GMAC: enet unit:1 is up...
  464. [ 23.132000] eth1 SGMII 1000Mbps full duplex
  465. [ 23.136000] 955x_GMAC: qca955x_soc_gmac_set_mac_duplex
  466. [ 23.140000] 955x_GMAC: qca955x_soc_gmac_set_link Done
  467. [ 23.144000] 955x_GMAC: done cfg2 0x7215 ifctl 0x0 miictrl
  468. [ 23.152000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  469. [ 24.448000] device ath0 entered promiscuous mode
  470. [ 24.452000] br1: port 2(ath0) entering forwarding state
  471. [ 24.924000] 955x_GMAC: qca955x_soc_gmac_set_mac_duplex
  472. [ 24.928000] 955x_GMAC: qca955x_soc_gmac_set_link Done
  473. [ 24.932000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
  474. [ 24.940000] br1: port 1(eth1) entering forwarding state
  475. [ 25.068000] ieee80211_ioctl_siwmode: imr.ifm_active=393856, new mode=3, valid=1
  476. [ 25.080000] Scan in progress.. Cancelling it
  477. [ 25.144000] br1: port 2(ath0) entering disabled state
  478. [ 25.148000] DEVICE IS DOWN ifname=ath0
  479. [ 25.152000] DEVICE IS DOWN ifname=ath0
  480. [ 25.364000] br1: port 2(ath0) entering forwarding state
  481. [ 26.620000] Scan in progress.. Cancelling it
  482. [ 26.684000] br1: port 2(ath0) entering disabled state
  483. [ 26.712000] br1: starting userspace STP failed, starting kernel STP
  484. [ 26.788000] br1: topology change detected, propagating
  485. [ 26.792000] br1: port 2(ath0) entering forwarding state
  486. [ 29.084000] mlme_create_infra_bss : Overriding HT40 channel with HT20 channel
  487. [ 39.340000] fuse init (API version 7.12)
  488. [ 39.504000] usbcore: registered new interface driver usbfs
  489. [ 39.508000] usbcore: registered new interface driver hub
  490. [ 39.516000] usbcore: registered new device driver usb
  491. [ 39.540000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  492. [ 39.548000] Port Status 1c000004
  493. [ 39.552000] ath-ehci ath-ehci.0: ATH EHCI
  494. [ 39.556000] ath-ehci ath-ehci.0: new USB bus registered, assigned bus number 1
  495. [ 39.564000] ehci_reset Intialize USB CONTROLLER in host mode: 13
  496. [ 39.572000] ehci_reset Port Status 1c000000
  497. [ 39.576000] ath-ehci ath-ehci.0: irq 3, io mem 0x1b000000
  498. [ 39.580000] ehci_reset Intialize USB CONTROLLER in host mode: 13
  499. [ 39.588000] ehci_reset Port Status 1c000000
  500. [ 39.604000] ath-ehci ath-ehci.0: USB 2.0 started, EHCI 1.00
  501. [ 39.608000] usb usb1: configuration #1 chosen from 1 choice
  502. [ 39.612000] hub 1-0:1.0: USB hub found
  503. [ 39.616000] hub 1-0:1.0: 1 port detected
  504. [ 39.624000] Port Status 1c000000
  505. [ 39.624000] ath-ehci1 ath-ehci1.1: ATH EHCI
  506. [ 39.628000] ath-ehci1 ath-ehci1.1: new USB bus registered, assigned bus number 2
  507. [ 39.640000] ehci_reset Intialize USB CONTROLLER in host mode: 13
  508. [ 39.644000] ehci_reset Port Status 1c000000
  509. [ 39.648000] ath-ehci1 ath-ehci1.1: irq 3, io mem 0x1b400000
  510. [ 39.656000] ehci_reset Intialize USB CONTROLLER in host mode: 13
  511. [ 39.664000] ehci_reset Port Status 1c000000
  512. [ 39.680000] ath-ehci1 ath-ehci1.1: USB 2.0 started, EHCI 1.00
  513. [ 39.684000] usb usb2: configuration #1 chosen from 1 choice
  514. [ 39.692000] hub 2-0:1.0: USB hub found
  515. [ 39.692000] hub 2-0:1.0: 1 port detected
  516. [ 39.872000] SCSI subsystem initialized
  517. [ 40.116000] Initializing USB Mass Storage driver...
  518. [ 40.120000] usbcore: registered new interface driver usb-storage
  519. [ 40.124000] USB Mass Storage support registered.
  520. [ 40.184000] GPL NetUSB up!
  521. [ 40.372000] kc 86 : run_telnetDBGDServer start
  522. [ 40.376000] kc 223 : init_DebugD end
  523. [ 40.380000] INFO1758: NetUSB 1.184, 0002061F : May 7 2012 10:35:23
  524. [ 40.388000] INFO175A: AUTH ISOC
  525. [ 40.392000] INFO175B:
  526. [ 40.392000] usbcore: registered new interface driver KC NetUSB General Driver
  527. [ 40.400000] INFO0076: init proc : PAGE_SIZE 4096
  528. [ 40.408000] INFO17B4: Check mac address
  529. [ 40.412000] INFO162C: infomap 86ecc220
  530. [ 40.416000] INFO162F: sleep to wait br0 to wake up
  531. [ 40.420000] INFO02D0: use dev Name br0
  532. [ 40.424000] INFO1638: sleep to wait br0 end.
  533. [ 40.428000] INFO1651: UDP_BROAD 7437 tcpPort:625868800
  534. [ 40.432000] INFO02D0: use dev Name br0
  535. [ 40.440000] INFO1538: tcpConnector() started...
  536. [ 40.784000] IPv6 over IPv4 tunneling driver
  537. [ 43.464000] INFO1415: Bind to br0
  538. check success
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!