Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ## Booting kernel from Legacy Image at 22000000 ...
- Image Name: linux-3.14
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 2172551 Bytes = 2.1 MiB
- Load Address: 20008000
- Entry Point: 20008000
- Verifying Checksum ... OK
- Loading Kernel Image ... OK
- OK
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 3.14.0+ (uprinz@NTGNBDE782LX) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #25 Tue Apr 8 15:51:53 CEST 2014
- [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
- [ 0.000000] CPU: VIVT data cache, VIVT instruction cache
- [ 0.000000] Machine model: Atmel at91sam9g20ek
- [ 0.000000] Memory policy: Data cache writeback
- [ 0.000000] AT91: Detected soc type: at91sam9g20
- [ 0.000000] AT91: sram at 0x2fc000 of 0x8000 mapped at 0xfef70000
- [ 0.000000] Clocks: CPU 396 MHz, master 132 MHz, main 18.432 MHz
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
- [ 0.000000] Kernel command line: console=ttyS0,115200 root=ubi0:dss11-1gb-rootfs ubi.mtd=3,4096 rw rootfstype=ubifs mtdparts=atmel_nand:4M(kernel-rescue),4M(kernel-prod),32M(rootfs-rescue),976M(rootfs-prod),-(config)
- [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
- [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Memory: 60592K/65536K available (2950K kernel code, 167K rwdata, 916K rodata, 126K init, 93K bss, 4944K reserved)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xc4800000 - 0xff000000 ( 936 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
- [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc03ceff8 (3868 kB)
- [ 0.000000] .init : 0xc03cf000 - 0xc03eea54 ( 127 kB)
- [ 0.000000] .data : 0xc03f0000 - 0xc0419c80 ( 168 kB)
- [ 0.000000] .bss : 0xc0419c80 - 0xc0431264 ( 94 kB)
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] sched_clock: 32 bits at 128 Hz, resolution 7812500ns, wraps every 16777216000000000ns
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.054687] Calibrating delay loop... 197.44 BogoMIPS (lpj=770048)
- [ 0.054687] pid_max: default: 32768 minimum: 301
- [ 0.054687] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.054687] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.062500] CPU: Testing write buffer coherency: ok
- [ 0.062500] Setting up static identity map for 0x202cb6b8 - 0x202cb6f4
- [ 0.062500] devtmpfs: initialized
- [ 0.062500] pinctrl core: initialized pinctrl subsystem
- [ 0.062500] NET: Registered protocol family 16
- [ 0.062500] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.085937] No ATAGs?
- [ 0.085937] gpio-at91 fffff400.gpio: at address fefff400
- [ 0.085937] gpio-at91 fffff600.gpio: at address fefff600
- [ 0.085937] gpio-at91 fffff800.gpio: at address fefff800
- [ 0.093750] pinctrl-at91 pinctrl.2: initialized AT91 pinctrl driver
- [ 0.125000] usbcore: registered new interface driver usbfs
- [ 0.125000] usbcore: registered new interface driver hub
- [ 0.125000] usbcore: registered new device driver usb
- [ 0.132812] i2c-gpio i2c.3: using pins 23 (SDA) and 24 (SCL)
- [ 0.132812] Switched to clocksource tcb_clksrc
- [ 0.179687] NET: Registered protocol family 2
- [ 0.179687] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.179687] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.179687] TCP: Hash tables configured (established 1024 bind 1024)
- [ 0.179687] TCP: reno registered
- [ 0.179687] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.179687] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.179687] NET: Registered protocol family 1
- [ 0.187500] futex hash table entries: 256 (order: -1, 3072 bytes)
- [ 0.187500] msgmni has been set to 118
- [ 0.187500] io scheduler noop registered (default)
- [ 0.187500] io scheduler deadline registered
- [ 0.187500] io scheduler cfq registered
- [ 0.195312] fffff200.serial: ttyS0 at MMIO 0xfffff200 (irq = 16, base_baud = 8256000) is a ATMEL_SERIAL
- [ 0.492187] console [ttyS0] enabled
- [ 0.500000] fffb4000.serial: ttyS2 at MMIO 0xfffb4000 (irq = 26, base_baud = 8256000) is a ATMEL_SERIAL
- [ 0.515625] brd: module loaded
- [ 0.531250] loop: module loaded
- [ 0.546875] atmel_nand 40000000.nand: No DMA support for NAND access.
- [ 0.554687] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x38
- [ 0.562500] nand: Micron MT29F8G08ABABAWP
- [ 0.562500] nand: 1024MiB, SLC, page size: 4096, OOB size: 224
- [ 0.578125] Scanning device for bad blocks
- [ 0.671875] 5 cmdlinepart partitions found on MTD device atmel_nand
- [ 0.679687] Creating 5 MTD partitions on "atmel_nand":
- [ 0.679687] 0x000000000000-0x000000400000 : "kernel-rescue"
- [ 0.687500] 0x000000400000-0x000000800000 : "kernel-prod"
- [ 0.695312] 0x000000800000-0x000002800000 : "rootfs-rescue"
- [ 0.710937] 0x000002800000-0x00003f800000 : "rootfs-prod"
- [ 0.718750] 0x00003f800000-0x000040000000 : "config"
- [ 0.726562] atmel_spi fffc8000.spi: version: 0x199
- [ 0.726562] atmel_spi fffc8000.spi: Atmel SPI Controller at 0xfffc8000 (irq 30)
- [ 0.742187] m25p80 spi32766.0: m25p40 (512 Kbytes)
- [ 0.757812] libphy: MACB_mii_bus: probed
- [ 0.843750] macb fffc4000.ethernet eth0: Cadence MACB at 0xfffc4000 irq 27 (a8:99:5c:00:0b:0a)
- [ 0.851562] macb fffc4000.ethernet eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fffc4000.etherne:03, irq=-1)
- [ 0.859375] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.867187] ehci-atmel: EHCI Atmel driver
- [ 0.867187] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.875000] ohci-atmel: OHCI Atmel driver
- [ 0.882812] at91_ohci 500000.ohci: OHCI Host Controller
- [ 0.890625] at91_ohci 500000.ohci: new USB bus registered, assigned bus number 1
- [ 0.890625] at91_ohci 500000.ohci: irq 32, io mem 0x00500000
- [ 0.960937] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.968750] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.976562] usb usb1: Product: OHCI Host Controller
- [ 0.976562] usb usb1: Manufacturer: Linux 3.14.0+ ohci_hcd
- [ 0.984375] usb usb1: SerialNumber: at91
- [ 0.992187] hub 1-0:1.0: USB hub found
- [ 0.992187] hub 1-0:1.0: 2 ports detected
- [ 1.000000] usbcore: registered new interface driver cdc_acm
- [ 1.007812] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 1.015625] usbcore: registered new interface driver usbserial
- [ 1.023437] usbcore: registered new interface driver usbserial_generic
- [ 1.023437] usbserial: USB Serial support registered for generic
- [ 1.156250] at91_rtc fffffd30.rtc: rtc core: registered fffffd30.rtc as rtc0
- [ 1.164062] at91_rtc fffffd30.rtc: AT91 Real Time Clock driver.
- [ 1.171875] rtc-rs5c372 0-0032: rs5c372a found, 24hr, driver version 0.6
- [ 1.179687] rtc-rs5c372 0-0032: rtc core: registered rtc-rs5c372 as rtc1
- [ 1.187500] lm75 0-0048: hwmon0: sensor 'lm75'
- [ 1.203125] usbcore: registered new interface driver usbhid
- [ 1.210937] usbhid: USB HID core driver
- [ 1.210937] TCP: cubic registered
- [ 1.218750] NET: Registered protocol family 10
- [ 1.218750] sit: IPv6 over IPv4 tunneling driver
- [ 1.234375] NET: Registered protocol family 17
- [ 1.242187] Key type encrypted registered
- [ 1.250000] UBI: attaching mtd3 to ubi0
- [ 3.562500] UBI: scanning is finished
- [ 3.585937] UBI warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 19, need 40
- [ 3.593750] UBI: attached mtd3 (name "rootfs-prod", size 976 MiB) to ubi0
- [ 3.601562] UBI: PEB size: 524288 bytes (512 KiB), LEB size: 516096 bytes
- [ 3.609375] UBI: min./max. I/O unit sizes: 4096/4096, sub-page size 1024
- [ 3.617187] UBI: VID header offset: 4096 (aligned 4096), data offset: 8192
- [ 3.625000] UBI: good PEBs: 1952, bad PEBs: 0, corrupted PEBs: 0
- [ 3.625000] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
- [ 3.632812] UBI: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 974153717
- [ 3.640625] UBI: available PEBs: 0, total reserved PEBs: 1952, PEBs reserved for bad PEB handling: 19
- [ 3.648437] UBI: background thread "ubi_bgt0d" started, PID 441
- [ 3.664062] input: gpio_keys.5 as /devices/gpio_keys.5/input/input0
- [ 3.671875] at91_rtc fffffd30.rtc: hctosys: invalid date/time
- [ 3.757812] UBIFS: background thread "ubifs_bgt0_0" started, PID 453
- [ 3.953125] UBIFS: mounted UBI device 0, volume 0, name "dss11-1gb-rootfs"
- [ 3.960937] UBIFS: LEB size: 516096 bytes (504 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
- [ 3.968750] UBIFS: FS size: 990388224 bytes (944 MiB, 1919 LEBs), journal size 10452992 bytes (9 MiB, 21 LEBs)
- [ 3.976562] UBIFS: reserved for root: 0 bytes (0 KiB)
- [ 3.984375] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 19201D95-9934-48A8-8485-EC2EF22717E0, small LPT model
- [ 4.000000] VFS: Mounted root (ubifs filesystem) on device 0:12.
- [ 4.000000] devtmpfs: mounted
- [ 4.007812] Freeing unused kernel memory: 124K (c03cf000 - c03ee000)
- INIT: version 2.88 booting
- Starting udev[ 6.742187] UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
- vm.min_free_kbytes = 4200
- Starting atd: OK
- Configuring network interfaces... [ 9.390625] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- udhcpc: option -h NAME is deprecated, use -x hostname:NAME
- udhcpc (v1.21.1) started
- Sending discover...
- [ 10.843750] macb fffc4000.ethernet eth0: link up (100/Full)
- [ 10.843750] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- Sending discover...
- Sending select for 10.0.0.120...
- Lease of 10.0.0.120 obtained, lease time 691200
- /etc/udhcpc.d/50default: Adding DNS 10.0.0.4
- /etc/udhcpc.d/50default: Adding DNS 10.0.0.3
- fail: upnpbeacon: runsv not running
- run-parts: /etc/udhcpc.d/99upnpbeacon exited with code 1
- done.
- Starting portmap daemon...
- INIT: Entering runlevel: 5
- Starting system message bus: [ 13.054687] random: dbus-daemon urandom read with 17 bits of entropy available
- dbus.
- Starting Dropbear SSH server: dropbear.
- Starting ntpd: done
- Starting syslogd/klogd: done
- * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
- ...done.
- Checking SSL availability of certificates... ok
- * starting dSS11 buttond: dss11-buttond... done.
- Stopping running services...
- Starting runit service supervisor: runsvdir.
- Starting crond: OK
- Enabling coredumps
- dSS11 WebSetup: checking old cron entries...done.
- .---O---.
- | | .-. o o
- | | |-----.-----.-----.| | .----..-----.-----.
- | | | __ | ---'| '--.| .-'| | |
- | | | | | |--- || --'| | | ' | | | |
- '---'---'--'--'--. |-----''----''--' '-----'-'-'-'
- -' |
- '---'
- The Angstrom Distribution dSS ttyS0
- Angstrom v2014.02-core - Kernel 3.14.0+
- root@dSS:~# fw_printenv
- [ 3246.328125] atmel_spi fffc8000.spi: overrun (4095/4095 remaining)
- Read error on /dev/mtd5: Success
- root@dSS:~#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement