API tools faq
paste
Guest User

hmm

a guest
Feb 10th, 2019
451
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 31.01 KB | None | 0 0
raw download clone embed print report
  1. [ 0.122430] print_constraints: max77696_ldo2: 800 <--> 3950 mV at 3000 mV normal idle standby
  2. [ 0.122960] print_constraints: max77696_ldo3: 800 <--> 3950 mV at 2500 mV normal idle standby
  3. [ 0.123515] print_constraints: max77696_ldo4: 800 <--> 2375 mV at 1800 mV normal idle standby
  4. [ 0.124043] print_constraints: max77696_ldo5: 800 <--> 2375 mV at 1800 mV normal idle standby
  5. [ 0.124604] print_constraints: max77696_ldo6: 800 <--> 3950 mV at 3200 mV normal idle standby
  6. [ 0.125140] print_constraints: max77696_ldo7: 800 <--> 3950 mV at 3200 mV normal idle standby
  7. [ 0.125670] print_constraints: max77696_ldo8: 800 <--> 2375 mV at 1100 mV normal idle standby
  8. [ 0.126214] print_constraints: max77696_ldo9: 800 <--> 2375 mV at 1100 mV normal idle standby
  9. [ 0.126751] print_constraints: max77696_ldo10: 2400 <--> 5550 mV at 5200 mV normal idle standby
  10. [ 0.127527] MAX77696 Linear Regulators Driver 1.0.2 Installed
  11. [ 0.128144] print_constraints: max77696_lsw1:
  12. [ 0.128864] print_constraints: max77696_lsw2:
  13. [ 0.129544] print_constraints: max77696_lsw3:
  14. [ 0.130341] print_constraints: max77696_lsw4:
  15. [ 0.130769] MAX77696 Load Switches Driver 1.0.0 Installed
  16. [ 0.131957] print_constraints: max77696-display:
  17. [ 0.132710] print_constraints: max77696-vcom:
  18. [ 0.133021] print_constraints: max77696-vee:
  19. [ 0.133348] print_constraints: max77696-vneg:
  20. [ 0.133698] print_constraints: max77696-vpos:
  21. [ 0.134012] print_constraints: max77696-vddh:
  22. [ 0.134994]
  23. [ 0.134997] EPD vreg probe complete!
  24. [ 0.135592] print_constraints: max77696_vddq: 240 <--> 984 mV at 600 mV
  25. [ 0.135645] MAX77696 LPDDR2 Termination Supply Driver 1.0.1 Installed
  26. [ 0.136916] MAX77696 I2C Driver 1.0.0 Installed
  27. [ 0.139033] Advanced Linux Sound Architecture Driver Version 1.0.24.
  28. [ 0.139622] i2c-core: driver [max17135] using legacy suspend method
  29. [ 0.139632] i2c-core: driver [max17135] using legacy resume method
  30. [ 0.139660] Switching to clocksource mxc_timer1
  31. [ 0.150713] NET: Registered protocol family 2
  32. [ 0.150803] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  33. [ 0.150981] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  34. [ 0.151194] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  35. [ 0.151334] TCP: Hash tables configured (established 16384 bind 16384)
  36. [ 0.151342] TCP reno registered
  37. [ 0.151350] UDP hash table entries: 256 (order: 0, 4096 bytes)
  38. [ 0.151365] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  39. [ 0.151614] NET: Registered protocol family 1
  40. [ 0.151809] RPC: Registered named UNIX socket transport module.
  41. [ 0.151818] RPC: Registered udp transport module.
  42. [ 0.151824] RPC: Registered tcp transport module.
  43. [ 0.151830] RPC: Registered tcp NFSv4.1 backchannel transport module.
  44. [ 0.157127] etb: probe of etb failed with error -2
  45. [ 0.157421] etm: probe of etm.0 failed with error -2
  46. [ 0.157692] Static Power Management for Freescale i.MX6
  47. [ 0.157702] wait mode is enabled for i.MX6
  48. [ 0.157852] cpaddr = 0 suspend_iram_base=f2900000
  49. [ 0.157893] PM driver module loaded
  50. [ 0.158171] IMX usb wakeup probe
  51. [ 0.158193] the wakeup pdata is 0xde0b5600
  52. [ 0.158815] IMX usb wakeup probe
  53. [ 0.158833] the wakeup pdata is 0xde0b5980
  54. [ 0.158992] cpu regulator mode:ldo_bypass
  55. [ 0.159390] i.MXC CPU frequency driver
  56. [ 0.175783] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  57. [ 0.176784] msgmni has been set to 1003
  58. [ 0.177238] io scheduler noop registered
  59. [ 0.177314] io scheduler cfq registered (default)
  60. [ 0.177767] MAX77696 Backlight Driver 1.0.0 Installed
  61. [ 0.178567] imx-sdma imx-sdma: loaded firmware 1.1
  62. [ 0.183505] imx-sdma imx-sdma: initialized
  63. [ 0.185367] Serial: IMX driver
  64. [ 0.185477] imx-uart.0: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX
  65. [ 0.185503] console [ttymxc0] enabled, bootconsole disabled
  66. [ 0.189242] loop: module loaded
  67. [ 0.189490] MAX77696 32kHz Oscillator Driver 1.0.0 Installed
  68. [ 0.190118] input: max77696-onkey as /devices/platform/imx-i2c.0/i2c-0/0-003c/max77696-onkey.0/input/input0
  69. [ 0.193245] MAX77696 ONKEY Driver 1.0.0 Installed
  70. [ 0.210394] max77696-rtc max77696-rtc.0: read time:
  71. [ 0.210410] max77696-rtc max77696-rtc.0: YEAR 13 MONTH 02 DOM 0A DOW 01 HOUR 46 MIN 16 SEC 0C
  72. [ 0.210423] max77696-rtc max77696-rtc.0: --> 2019-02-10 Sun 18:22:12
  73. [ 0.210887] max77696-rtc max77696-rtc.0: read alarm0:
  74. [ 0.210899] max77696-rtc max77696-rtc.0: YEAR 13 MONTH 02 DOM 0A HOUR 48 MIN 2D SEC 2B
  75. [ 0.210909] max77696-rtc max77696-rtc.0: --> 2019-02-10 20:45:43
  76. [ 0.211148] max77696-rtc max77696-rtc.0: rtc core: registered max77696-rtc.0 as rtc0
  77. [ 0.230300] max77696-rtc max77696-rtc.0: read time:
  78. [ 0.230313] max77696-rtc max77696-rtc.0: YEAR 13 MONTH 02 DOM 0A DOW 01 HOUR 46 MIN 16 SEC 0C
  79. [ 0.230325] max77696-rtc max77696-rtc.0: --> 2019-02-10 Sun 18:22:12
  80. [ 0.230738] max77696-rtc max77696-rtc.0: read alarm1:
  81. [ 0.230749] max77696-rtc max77696-rtc.0: YEAR 00 MONTH 01 DOM 01 HOUR 00 MIN 00 SEC 00
  82. [ 0.230759] max77696-rtc max77696-rtc.0: --> 2000-01-01 00:00:00
  83. [ 0.230934] max77696-rtc max77696-rtc.0: rtc core: registered max77696-rtc.1 as rtc1
  84. [ 0.232391] max77696-rtc max77696-rtc.0: 1 minute interrupt: off
  85. [ 0.232401] max77696-rtc max77696-rtc.0: 1 second interrupt: off
  86. [ 0.250315] max77696-rtc max77696-rtc.0: read time:
  87. [ 0.250327] max77696-rtc max77696-rtc.0: YEAR 13 MONTH 02 DOM 0A DOW 01 HOUR 46 MIN 16 SEC 0C
  88. [ 0.250338] max77696-rtc max77696-rtc.0: --> 2019-02-10 Sun 18:22:12
  89. [ 0.250348] max77696-rtc max77696-rtc.0: current time *** 2019-02-10 Sun 18:22:12
  90. [ 0.250355] MAX77696 RTC Driver 1.0.2 Installed
  91. [ 0.251067] snvs_rtc snvs_rtc.0: rtc core: registered snvs_rtc as rtc2
  92. [ 0.251248] i2c /dev entries driver
  93. [ 0.255163] max77696-battery max77696-battery.0: Voltage alert 3400mV ... 4400mV
  94. [ 0.255565] max77696-battery max77696-battery.0: SOC alert (disabled)
  95. [ 0.256442] MAX77696 Fuel Gauge Driver 1.0.0 Installed
  96. [ 0.258534] MAX77696 USB Interface Circuit Driver 1.0.0 Installed
  97. [ 0.259574] max77696_uic_isr: cancel: 0
  98. [ 0.260041] pmic_soda_connects_notify_otg_out:423
  99. [ 0.264750] max77696_uic_adc_work adcval 31 in_otg 0
  100. [ 0.266956] max77696-adc max77696-adc.0: ADC average rate: 32 sample(s)
  101. [ 0.266967] max77696-adc max77696-adc.0: ADC delay: 0 nsec
  102. [ 0.266974] max77696-adc max77696-adc.0: ADC cur src: 50 uA
  103. [ 0.266983] MAX77696 ADC Driver 1.0.1 Installed
  104. [ 0.267468] imx2-wdt imx2-wdt.0: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=1)
  105. [ 0.268317] sdhci: Secure Digital Host Controller Interface driver
  106. [ 0.268326] sdhci: Copyright(c) Pierre Ossman
  107. [ 0.268446] mmc0: no vmmc regulator found
  108. [ 0.269464] sdhci: =========== REGISTER DUMP (mmc0)===========
  109. [ 0.269472]
  110. [ 0.269474] 0xe0858000: 00000000 00010200 00000000 083a0000
  111. [ 0.269485] 0xe0858010: 00000900 fffffffd 320f5903 00000b00
  112. [ 0.269495] 0xe0858020: 00000000 ff888088 08800024 008e0118
  113. [ 0.269504] 0xe0858030: 00000000 007f0003 007f0003 00000000
  114. [ 0.269514] 0xe0858040: 07f3b407 08000880 00000011 00000000
  115. [ 0.269523] 0xe0858050: 00000000 00000000 00000000 00000000
  116. [ 0.269532] 0xe0858060: 00000000 00000200 00000000 0800ff00
  117. [ 0.269541] 0xe0858070: 00000000 00000000 00000000 00000000
  118. [ 0.269550] 0xe0858080: 00000000 00000000 00000000 00000000
  119. [ 0.269560] 0xe0858090: 00000000 00000000 00000000 00000000
  120. [ 0.269569] 0xe08580a0: 00000000 00000000 00000000 00000000
  121. [ 0.269578] 0xe08580b0: 00000000 00000000 00000000 00000000
  122. [ 0.269588] 0xe08580c0: 2000780b 00000000 00000006 00212800
  123. [ 0.269600] CCM: CSCMR1(0x00900040), CSCDR1(0x00490b40)
  124. [ 0.269607] CCM: CCOSR(0x000a000c), CCGR6(0x00000030)
  125. [ 0.269612] CCM: CMEOR(0x7fffffff)
  126. [ 0.269617] sdhci: ===========================================
  127. [ 0.270056] mmc0: SDHCI controller on platform [sdhci-esdhc-imx.1] using DMA
  128. [ 0.271147] mmc1: no vmmc regulator found
  129. [ 0.272165] sdhci: =========== REGISTER DUMP (mmc1)===========
  130. [ 0.272174]
  131. [ 0.272176] 0xe0860000: 00000000 00010000 00000000 00000000
  132. [ 0.272187] 0xe0860010: 00000000 00000000 00000000 00000000
  133. [ 0.272196] 0xe0860020: 00000000 ff888088 08800020 0080800f
  134. [ 0.272206] 0xe0860030: 00000000 007f0003 007f0003 00000000
  135. [ 0.272216] 0xe0860040: 07f3b407 08100810 80000000 00000000
  136. [ 0.272226] 0xe0860050: 00000000 00000000 00000000 00000000
  137. [ 0.272235] 0xe0860060: 00000000 00000200 00000000 0800ff00
  138. [ 0.272245] 0xe0860070: 00000000 00000000 00000000 00000000
  139. [ 0.272254] 0xe0860080: 00000000 00000000 00000000 00000000
  140. [ 0.272263] 0xe0860090: 00000000 00000000 00000000 00000000
  141. [ 0.272272] 0xe08600a0: 00000000 00000000 00000000 00000000
  142. [ 0.272281] 0xe08600b0: 00000000 00000000 00000000 00000000
  143. [ 0.272290] 0xe08600c0: 2000780b 00000000 00000006 00212800
  144. [ 0.272302] CCM: CSCMR1(0x00900040), CSCDR1(0x00490b40)
  145. [ 0.272309] CCM: CCOSR(0x000a000c), CCGR6(0x000000c0)
  146. [ 0.272314] CCM: CMEOR(0x7fffffff)
  147. [ 0.272319] sdhci: ===========================================
  148. [ 0.272398] mmc0: mmc_rescan_try_freq: trying to init card at 400000 Hz
  149. [ 0.273753] mmc1: SDHCI controller on platform [sdhci-esdhc-imx.2] using DMA
  150. [ 0.274416] Registered led device: max77696-leds.0
  151. [ 0.274425] MAX77696 LED Driver #0 1.0.0 Installed
  152. [ 0.274583] Registered led device: max77696-leds.1
  153. [ 0.274592] MAX77696 LED Driver #1 1.0.0 Installed
  154. [ 0.275080] usbcore: registered new interface driver snd-usb-audio
  155. [ 0.275089] ALSA device list:
  156. [ 0.275093] No soundcards found.
  157. [ 0.275398] nf_conntrack version 0.5.0 (8025 buckets, 32100 max)
  158. [ 0.276022] ip_tables: (C) 2000-2006 Netfilter Core Team
  159. [ 0.276080] TCP cubic registered
  160. [ 0.276090] NET: Registered protocol family 17
  161. [ 0.276108] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  162. [ 0.276244] LPDDR2 MfgId: 0x3 [Elpida]
  163. [ 0.280187]
  164. [ 0.280190] just text: vaddr c0132fdc, va 0xc0132200 pa 0x801000c3 attr 0x6
  165. [ 0.288470]
  166. [ 0.288472] nmx6sl_wfi_iram: vaddr e084e000, va 0xe084e200 pa 0x904043 attr 0x2
  167. [ 0.301525]
  168. [ 0.301527] mx6sl_ddr: vaddr e0856000, va 0xe0856200 pa 0x905043 attr 0x2
  169. [ 0.309844]
  170. [ 0.309847] mx6sl_iomux: vaddr f40e0000, va 0xf40e0200 pa 0x20110c3 attr 0x149
  171. [ 0.318569]
  172. [ 0.318571] ANATOP: vaddr f40c8000, va 0xf40c8200 pa 0x20110c3 attr 0x149
  173. [ 0.326957]
  174. [ 0.326959] CCM: vaddr f40c4000, va 0xf40c4200 pa 0x20110c3 attr 0x149
  175. [ 0.337034]
  176. [ 0.337037] MMDC_P0: vaddr f41b0000, va 0xf41b0200 pa 0x21110c3 attr 0x149
  177. [ 0.350467]
  178. [ 0.350469] L2: vaddr f2a02000, va 0xf2a02200 pa 0xa02043 attr 0x149
  179. [ 0.359405]
  180. [ 0.359407] arm perif: vaddr f2a00000, va 0xf2a00200 pa 0xa00043 attr 0x149
  181. [ 0.368567] max77696_uic_isr: cancel: 0
  182. [ 0.373160] Bus freq driver module loaded
  183. [ 0.373179] Bus freq driver Enabled
  184. [ 0.375177] mxc_dvfs_core_probe
  185. [ 0.376240] DVFS driver module loaded
  186. [ 0.389248] regulator_init_complete: max77696_ldo10: incomplete constraints, leaving on
  187. [ 0.390201] regulator_init_complete: max77696_ldo7: incomplete constraints, leaving on
  188. [ 0.390616] regulator_init_complete: max77696_ldo6: incomplete constraints, leaving on
  189. [ 0.392997] regulator_init_complete: max77696_buck6: incomplete constraints, leaving on
  190. [ 0.393315] regulator_init_complete: max77696_buck5: incomplete constraints, leaving on
  191. [ 0.393736] regulator_init_complete: max77696_buck2dvs: incomplete constraints, leaving on
  192. [ 0.393952] regulator_init_complete: max77696_buck1dvs: incomplete constraints, leaving on
  193. [ 0.410885] max77696-rtc max77696-rtc.0: read time:
  194. [ 0.410898] max77696-rtc max77696-rtc.0: YEAR 13 MONTH 02 DOM 0A DOW 01 HOUR 46 MIN 16 SEC 0C
  195. [ 0.410920] max77696-rtc max77696-rtc.0: --> 2019-02-10 Sun 18:22:12
  196. [ 0.410940] max77696-rtc max77696-rtc.0: setting system clock to 2019-02-10 18:22:12 UTC (1549822932)
  197. [ 0.411476] max77696_uic_isr: cancel: 1
  198. [ 0.428163] MAX77696 Main Charger Driver 1.0.0 Installed
  199. [ 0.431337] MAX77696 Energy Harvester Driver 1.0.0 Installed
  200. [ 0.431889] Freeing init memory: 1112K
  201. [ 0.432713] ERROR:boardid.c:48:get_string_from_file():/proc/serial:error 2(2)
  202. [ 0.460553] emmc: I def:mmcpartinfo:vendor=sandisk, host=mmc0:
  203. [ 0.495385] mmc0: new high speed DDR MMC card at address 0001
  204. [ 0.495659] mmcblk0: mmc0:0001 SEM04G 3.68 GiB
  205. [ 0.495781] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB
  206. [ 0.495899] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB
  207. [ 0.496783] mmcblk0: p1 p2 p3 p4
  208. [ 0.498899] mmcblk0boot1: unknown partition table
  209. [ 0.500751] mmcblk0boot0: unknown partition table
  210. [ 0.500934] mmc1: mmc_rescan_try_freq: trying to init card at 400000 Hz
  211. [ 0.536685] DEBUG:mount.c:331:mount_waveform_area():Mounted /mnt/wfm (/dev/loop1)
  212. [ 0.538141] INFO:update.c:118:find_file():find_file:118 Found 320_G101_AC1006_ED060TC1C1_TC.wrf.gz
  213. [ 0.538197] ERROR:recovery-util.c:1850:main():wfm_count=1DEBUG:eink.c:292:eink_init():Loading: /lib/modules/mxc_epdc_eink.ko
  214. [ 0.540018] DEBUG:eink.c:297:eink_init():Loading: /lib/modules/mxc_epdc_eink.ko
  215. [ 0.542233] DEBUG:module.c:139:insmod():/lib/modules/mxc_epdc_eink.ko:loaded 11924 bytes. (11924)
  216. [ 0.542297] mxc_epdc_eink: module license 'proprietary' taints kernel.
  217. [ 0.542305] Disabling lock debugging due to kernel taint
  218. [ 0.548858] INFO:module.c:163:insmod():Loaded module /lib/modules/mxc_epdc_eink.ko (11924 bytes)
  219. [ 0.548913] DEBUG:eink.c:292:eink_init():Loading: /lib/modules/mxc_epdc_fb.ko
  220. [ 0.548929] DEBUG:eink.c:297:eink_init():Loading: /lib/modules/mxc_epdc_fb.ko
  221. [ 0.554855] DEBUG:module.c:139:insmod():/lib/modules/mxc_epdc_fb.ko:loaded 141940 bytes. (141940)
  222. [ 0.581863] mmc1: mmc_rescan_try_freq: trying to init card at 300000 Hz
  223. [ 0.582555] imx_epdc_fb imx_epdc_fb: Found a video mode override (EBA)
  224. [ 0.609921] max77696_uic_adc_work adcval 14 in_otg 0
  225. [ 0.659440] mmc1: mmc_rescan_try_freq: trying to init card at 200000 Hz
  226. [ 0.732088] mmc1: mmc_rescan_try_freq: trying to init card at 100000 Hz
  227. [ 1.179701] add wake up source irq 104
  228. [ 1.686961] Retrieved voltage control information
  229. [ 2.249728] KERNEL: I pmic:fg battery id check::wario_battery_valid=1
  230. [ 3.715639] INFO:module.c:163:insmod():Loaded module /lib/modules/mxc_epdc_fb.ko (141940 bytes)
  231. [ 3.990977] INFO:eink.c:392:eink_init():eink initialized... (1575424 bytes)
  232. [ 3.991175] DEBUG:recovery-util.c:745:choose_boot_mode():curr_time=1549822936 end_time=1549822936
  233. [ 3.991286] DEBUG:keypad.c:105:keypad_set():keypad_set():keypad_fd=-1 biggest_fd=0xbee8293c biggest_fd=0 s=0xbee82990
  234. [ 4.993696] DEBUG:readkey.c:121:read_key():Timeout
  235. [ 4.993973] DEBUG:recovery-util.c:762:choose_boot_mode():curr_time=1549822937 end_time=1549822936 **
  236. [ 4.996836] INFO:recovery-util.c:409:battery_check():Battery ID is valid
  237. [ 4.997888] INFO:recovery-util.c:417:battery_check():Battery percentage = 99
  238. [ 4.998888] DEBUG:diskutil.c:404:device_size():device size: 921600 sectors
  239. [ 4.999376] DEBUG:diskutil.c:404:device_size():device size: 131072 sectors
  240. [ 5.000271] DEBUG:diskutil.c:404:device_size():device size: 6385664 sectors
  241. [ 5.000610] DEBUG:diskutil.c:404:device_size():device size: 7733248 sectors
  242. [ 5.000674] INFO:recovery-util.c:1127:check_mbr():!!! Checking MBR /dev/mmcblk0 !!!!
  243. [ 5.004711] DEBUG:diskutil.c:444:get_disk_info():real C:55296 H:4 S:16
  244. [ 5.004765] DEBUG:diskutil.c:456:get_disk_info():calc C:120832 H:4 S:16
  245. [ 5.004813] DEBUG:diskutil.c:587:append_partition():partition 1: requested length=921600
  246. [ 5.004872] DEBUG:diskutil.c:210:roundup_lba():lba=987136 cylsize=64 ret=987136
  247. [ 5.004927] DEBUG:diskutil.c:210:roundup_lba():lba=987136 cylsize=64 ret=987136
  248. [ 5.004967] INFO:diskutil.c:573:append_partition():partition 2, start sector is 987136
  249. [ 5.005008] DEBUG:diskutil.c:587:append_partition():partition 2: requested length=131072
  250. [ 5.005064] DEBUG:diskutil.c:210:roundup_lba():lba=1118208 cylsize=64 ret=1118208
  251. [ 5.005117] DEBUG:diskutil.c:210:roundup_lba():lba=1118208 cylsize=64 ret=1118208
  252. [ 5.005159] INFO:diskutil.c:573:append_partition():partition 3, start sector is 1118208
  253. [ 5.005199] DEBUG:diskutil.c:587:append_partition():partition 3: requested length=131072
  254. [ 5.005255] DEBUG:diskutil.c:210:roundup_lba():lba=1249280 cylsize=64 ret=1249280
  255. [ 5.005307] DEBUG:diskutil.c:210:roundup_lba():lba=1249280 cylsize=64 ret=1249280
  256. [ 5.005347] INFO:diskutil.c:573:append_partition():partition 4, start sector is 1249280
  257. [ 5.005380] DEBUG:diskutil.c:587:append_partition():partition 4: requested length=0
  258. [ 5.005425] INFO:diskutil.c:238:make_part_info():maximizing partition 6483968 sectors
  259. [ 5.005528] DEBUG:recovery-util.c:1189:check_mbr():Expected: 803D0FF 833D0FF 0100 10E00, 3D0FF83 3D0FF0 10F00 0200
  260. [ 5.005611] DEBUG:recovery-util.c:1199:check_mbr():MBR : 803D0FF 833D0FF 0100 10E00, 3D0FF83 3D0FF0 10F00 0200
  261. [ 5.005650] DEBUG:recovery-util.c:1201:check_mbr():!!! MBR checked /dev/mmcblk0 rootfs 0 varfs 0 !!!!
  262. [ 5.005686] INFO:recovery-util.c:1259:check_and_create_partitions():*** Partition table verified for /dev/mmcblk0 ***
  263. [ 5.005786] DEBUG:diskutil.c:444:get_disk_info():real C:55296 H:4 S:16
  264. [ 5.005833] DEBUG:diskutil.c:456:get_disk_info():calc C:99776 H:4 S:16
  265. [ 5.007128] INFO:diskutil.c:618:dump_part():/dev/mmcblk0p4:
  266. [ 5.007205] INFO:diskutil.c:624:dump_part():CHS=4/16/99776 size=3269459968 bytes
  267. [ 5.007237] INFO:diskutil.c:625:dump_part():flag type first last lba first lba size
  268. [ 5.007268] INFO:diskutil.c:630:dump_part():Partition p1:
  269. [ 5.007339] INFO:diskutil.c:339:print_part_info():0x00 0x0b 16 <large> 16 6385648 CHS: 0/1/1 - <large>
  270. [ 5.007376] INFO:diskutil.c:630:dump_part():Partition p2:
  271. [ 5.007402] INFO:diskutil.c:630:dump_part():Partition p3:
  272. [ 5.007427] INFO:diskutil.c:630:dump_part():Partition p4:
  273. [ 5.007792] INFO:mount.c:162:losetup_fat():Setup loop device /dev/loop0 for /dev/mmcblk0p4 + 8192
  274. [ 5.011709] DEBUG:mount.c:184:mount_dosfs():Mounted /mnt-us (/dev/loop0)
  275. [ 5.011947] INFO:recovery-util.c:1715:autopilot_update():Checking for updates... (auto-pilot mode)
  276. [ 5.012275] INFO:update.c:204:update_os():No update*.bin found; no update needed.
  277. [ 5.030059] INFO:recovery-util.c:1754:autopilot_update():no updates found.
  278. [ 6.126746] EXT3-fs (mmcblk0p1): recovery required on readonly filesystem
  279. [ 6.126772] EXT3-fs (mmcblk0p1): write access will be enabled during recovery
  280. [ 6.127318] EXT3-fs: barriers not enabled
  281. [ 6.145207] EXT3-fs (mmcblk0p1): recovery complete
  282. [ 6.145369] kjournald starting. Commit interval 5 seconds
  283. [ 6.147459] EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
  284. [ 7.253726] udevd (763): /proc/763/oom_adj is deprecated, please use /proc/763/oom_score_adj instead.
  285. [ 8.150304] max77696-rtc max77696-rtc.0: read time:
  286. [ 8.150319] max77696-rtc max77696-rtc.0: YEAR 13 MONTH 02 DOM 0A DOW 01 HOUR 46 MIN 16 SEC 14
  287. [ 8.150332] max77696-rtc max77696-rtc.0: --> 2019-02-10 Sun 18:22:20
  288. [ 9.104678] Freescale USB OTG Driver loaded, $Revision: 1.55 $
  289. [ 9.105562] add wake up source irq 75
  290. [ 9.156172] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  291. [ 9.159404] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
  292. [ 9.159430] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
  293. [ 9.179731] fsl-ehci fsl-ehci.0: irq 75, io base 0x02184000
  294. [ 9.199707] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
  295. [ 9.202279] hub 1-0:1.0: USB hub found
  296. [ 9.202304] hub 1-0:1.0: 1 port detected
  297. [ 9.202524] add wake up source irq 74
  298. [ 9.204080] fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
  299. [ 9.204104] fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
  300. [ 9.229763] fsl-ehci fsl-ehci.1: irq 74, io base 0x02184200
  301. [ 9.249719] fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
  302. [ 9.250143] hub 2-0:1.0: USB hub found
  303. [ 9.250162] hub 2-0:1.0: 1 port detected
  304. [ 9.297145] fuse init (API version 7.16)
  305. [ 9.366408] Initializing Wario Proximity Sensor
  306. [ 9.401060] Proximity Sensor Found, Firmware Rev: 0x11
  307. [ 9.401227] i2c-core: driver [wario_prox] using legacy suspend method
  308. [ 9.401235] i2c-core: driver [wario_prox] using legacy resume method
  309. [ 9.435787] EXT3-fs: barriers not enabled
  310. [ 9.521113] mwan: I mwan_init:init:wario WAN hardware driver 2.0.0
  311. [ 9.521157] mwan: I wan_init:mwan:wan_init
  312. [ 9.522209] mwan: D elmo_probe:mwan:elmo_probe::Probing elmo device
  313. [ 9.666312] kjournald starting. Commit interval 5 seconds
  314. [ 9.667356] EXT3-fs (mmcblk0p3): using internal journal
  315. [ 9.667364] EXT3-fs (mmcblk0p3): recovery complete
  316. [ 9.668405] EXT3-fs (mmcblk0p3): mounted filesystem with writeback data mode
  317. [ 9.703160] PPP generic driver version 2.4.2
  318. [ 9.787569] i2c-core: driver [max44009_als] using legacy suspend method
  319. [ 9.787581] i2c-core: driver [max44009_als] using legacy resume method
  320. [ 10.279425] cyttsp4_i2c_adapter 1-0024: cyttsp4_i2c_probe: Starting cyttsp4_i2c_adapter probe...
  321. [ 10.280523] cyttsp4_i2c_adapter 1-0024: cyttsp4_i2c_probe: Successful probe cyttsp4_i2c_adapter
  322. [ 10.281810] cyttsp4_i2c_init: Cypress TTSP I2C Touchscreen Driver (Built 20121109) rc=0
  323. [ 10.341822] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_core_probe: startup
  324. [ 10.341844] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_core_probe: Init HW
  325. [ 10.346638] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: recovery_mode=0
  326. [ 11.347980] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_startup_2: cyttsp4_exit startup r=0...
  327. [ 11.348276] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_reset_and_wait: reset hw...
  328. [ 12.313815] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_si_get_test_data: SCANNING is ENABLED codel=0E
  329. [ 12.325214] cyttsp4_core:fw:ver=0017:
  330. [ 12.369754] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_startup_: cyttsp4_exit startup r=0...
  331. [ 12.369828] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_core_probe: ok
  332. [ 12.370074] cyttsp4_core_init: Cypress TTSP v4 core driver (Built 20121109) rc=0
  333. [ 12.460148] cyttsp4_mt cyttsp4_mt.main_ttsp_core: cyttsp4_mt_probe
  334. [ 12.464504] input: cyttsp4_mt as /devices/platform/imx-i2c.1/i2c-1/1-0024/main_ttsp_core.cyttsp4_i2c_adapter/cyttsp4_mt.main_ttsp_core/input/input1
  335. [ 12.471888] cyttsp4_mt_init: Cypress TTSP MT v4 multi-touch (Built 20121109), rc=0
  336. [ 12.730498] [DRV26XX]Found matching id!
  337. [ 12.767613] [DRV26XX]Probe succeeded!
  338. [ 12.864539] input: fsr_keypad as /devices/platform/fsr_keypad.0/input/input2
  339. [ 12.939034] fsr:power on completed
  340. [ 13.064582] fsr_config: n_adc=6, adc_depth=16, app_ver=10, n_buttons=4, flash=8000
  341. [ 13.102263] Done Registering FSR platform device
  342. [ 13.104034] fsr_keypad: I fsr_keypad_proc_write::command=lock:
  343. [ 13.104964] fsr:power off completed
  344. [ 13.104975] fsr: lock done
  345. [ 13.213245] fsr_keypad: I fsr_keypad_proc_write::command=unlock:
  346. [ 13.257574] fsr:power on completed
  347. [ 13.273876] fsr: unlock done
  348. [ 13.508481] fsr:power on completed
  349. [ 16.129097] ARC USBOTG Device Controller driver (1 August 2005)
  350. [ 16.147969] fsg_bind:3588 unbind
  351. [ 16.150689] g_file_storage gadget: File-backed Storage Gadget, version: 1 September 2010
  352. [ 16.150704] g_file_storage gadget: Number of LUNs=1
  353. [ 16.150714] Suspend udc for OTG auto detect
  354. [ 16.180174] fsl-usb2-udc: bind to driver g_file_storage
  355. [ 20.954277] fsg_disconnect:764
  356. [ 20.974140] fsg_unbind:3384 unbind
  357. [ 20.974154]
  358. [ 20.974156] send_offline_uevent:641 fsg_ 0x0 unsafe 1 recovery_mode:0
  359. [ 20.974280] unregistered gadget driver 'g_file_storage'
  360. [ 21.187243] usb0: MAC ee:19:00:00:00:00
  361. [ 21.187254] usb0: HOST MAC ee:49:00:00:00:00
  362. [ 21.187264] g_ether gadget: controller 'fsl-usb2-udc' not recognized; trying CDC Ethernet (ECM)
  363. [ 21.187298] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
  364. [ 21.187317] g_ether gadget: g_ether ready
  365. [ 21.187324] Suspend udc for OTG auto detect
  366. [ 21.260630] fsl-usb2-udc: bind to driver g_ether
  367. [ 22.425291] mwan: D set_wan_on_off:pow:enable=1:setting WAN hardware power state
  368. [ 22.449739] mwan: D set_wan_rf_enable:swe:enable=1:setting WAN RF enable state
  369. [ 23.059765] mwan: D set_wan_rf_enable:swe:enable=0:setting WAN RF enable state
  370. [ 23.059780] mwan: D set_wan_power:elmo_cond:elmo_fw_ready_condition=0:Waiting for fw ready event
  371. [ 26.579771] mwan: D do_elmo_fw_ready:elmo_fw::elmo fw ready
  372. [ 26.579802] mwan: D set_wan_power:elmo_cond:elmo_fw_ready_condition=1:FW ready
  373. [ 27.801158] usbcore: registered new interface driver usbserial
  374. [ 27.801170] usbserial: USB Serial Driver core
  375. [ 27.955669] USB Serial support registered for GSM modem (1-port)
  376. [ 27.965088] usbcore: registered new interface driver option
  377. [ 27.965098] option: v0.7.2:USB Driver for GSM modems
  378. [ 27.965629] mwan: D set_wan_usb_enable:swu:enable=1:setting WAN USB enable state
  379. [ 28.229760] usb 2-1: new full speed USB device number 2 using fsl-ehci
  380. [ 28.390298] option 2-1:1.0: GSM modem (1-port) converter detected
  381. [ 28.390609] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
  382. [ 28.390960] option 2-1:1.1: GSM modem (1-port) converter detected
  383. [ 28.391162] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
  384. [ 30.595599] mwan: I init_modem_type:smt:type=4:setting modem type
  385. [ 32.928270] cfg80211: Calling CRDA to update world regulatory domain
  386. [ 32.928323] cfg80211: World regulatory domain updated:
  387. [ 33.889804] mmc1: mmc_rescan_try_freq: trying to init card at 400000 Hz
  388. [ 33.989753] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  389. [ 33.998943] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  390. [ 34.003410] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  391. [ 34.004160] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  392. [ 34.053204] mmc1: queuing unknown CIS tuple 0x80 (1 bytes)
  393. [ 34.053273] mmc1: queuing unknown CIS tuple 0x81 (1 bytes)
  394. [ 34.053343] mmc1: queuing unknown CIS tuple 0x82 (1 bytes)
  395. [ 34.053381] mmc1: new high speed SDIO card at address 0001
  396. [ 34.119840] ath6kl: ath6kl_fetch_board_file: Board calibration file fetched: /opt/ar6k/target/AR6003/hw2.1.1/bin/AR6003_wan_calfile.bin
  397. [ 34.250100] ath6kl: MAC from kernel xx:xx:xx:xx:xx:23
  398. [ 34.269150] cfg80211: wext will not work because kernel was compiled with CONFIG_WIRELESS_EXT=n. Tools using wext interface, like iwconfig will not work.
  399. [ 34.729654] ath6kl: host only supports scatter of :1 entries, need: 16
  400. [ 34.780273] ath6kl: ar6003 hw 2.1.1 sdio fw 3.4.0.225.3.SMARTPHONE api 4
  401. [ 34.780642] ath6kl: Current ath6kl driver version is: 3.4.0.158
  402. [ 35.448127] cfg80211: Calling CRDA for country: GB
  403. [ 35.448224] cfg80211: Regulatory domain changed to country: GB
  404. [ 42.088763] cvm (5001): undefined instruction: pc=40ba1c40
  405. [ 42.088773] Code: e590c004 e15c0008 0a000000 eafe380f (e7f000f0)
  406. [ 47.131205] cvm (5001): undefined instruction: pc=40b9e840
  407. [ 47.131214] Code: e590c004 e15c0008 0a000000 eafe450f (e7f000f0)
  408. [ 48.741287] ThreadPool-Proc (5468) segfault pc: 40b8e79c addr:400f1000
  409. [ 51.678816] ThreadPool-Proc (5468) segfault pc: 40b95040 addr:400f1000
  410. [ 56.503504] ThreadPool-Proc (5468) segfault pc: 40bd8f14 addr:400f1000
  411. [ 56.621723] ThreadPool-Proc (5468) segfault pc: 40ba3108 addr:400f1000
  412. [ 56.909255] cvm (5001): undefined instruction: pc=40bb90e0
  413. [ 56.909265] Code: e590c004 e15c0008 0a000000 eafddae7 (e7f000f0)
  414. [ 57.571146] ThreadPool-Proc (5468) segfault pc: 40c0ded8 addr:00000008
  415. [ 62.406767] cvm (5001): undefined instruction: pc=40c0ebe0
  416. [ 62.406777] Code: e590c004 e15c0008 0a000000 eafc8427 (e7f000f0)
  417. [ 63.227959] cvm (5001): undefined instruction: pc=40bab080
  418. [ 63.227968] Code: e590c004 e15c0008 0a000000 eafe12ff (e7f000f0)
  419. [ 63.273503] cvm (5001): undefined instruction: pc=40bdc440
  420. [ 63.273513] Code: e590c004 e15c0008 0a000000 eafd4e0f (e7f000f0)
  421. [ 63.273675] cvm (5001): undefined instruction: pc=40bdc200
  422. [ 63.273683] Code: e590c004 e15c0008 0a000000 eafd4e9f (e7f000f0)
  423. [ 70.302096] ThreadPool-Proc (5465) segfault pc: 40b8e79c addr:400f1000
  424. [ 72.449736] EXT3-fs (mmcblk0p1): using internal journal
  425. [ 72.821441] ThreadPool-Proc (5463) segfault pc: 40bac048 addr:400f1000
  426. [ 73.608164] ThreadPool-Proc (5463) segfault pc: 40bad220 addr:400f1000
  427. [ 133.149755] unregistered gadget driver 'g_ether'
  428. [ 133.153077] ARC USBOTG Device Controller driver unregistered
  429. [ 133.308133] ARC USBOTG Device Controller driver (1 August 2005)
  430. [ 133.329812] fsg_bind:3588 unbind
  431. [ 133.339330] g_file_storage gadget: File-backed Storage Gadget, version: 1 September 2010
  432. [ 133.339346] g_file_storage gadget: Number of LUNs=1
  433. [ 133.339358] Suspend udc for OTG auto detect
  434. [ 133.370961] fsl-usb2-udc: bind to driver g_file_storage
  435. [ 144.253901] Thread-32 (6458): undefined instruction: pc=40c6b0f0
  436. [ 144.253910] Code: 60026001 00016008 60096000 00000000 (e7f000f0)
  437. [ 145.220579] Thread-32 (6458): undefined instruction: pc=40c28790
  438. [ 145.220589] Code: e590c004 e15c0008 0a000000 eafc1d3b (e7f000f0)
  439. [ 145.349076] Thread-32 (6458) segfault pc: 40c535b8 addr:400f1000
  440. [ 145.816232] fsg_disconnect:764
  441. [ 145.849663] fsg_unbind:3384 unbind
  442. [ 145.850257]
  443. [ 145.850260] send_offline_uevent:641 fsg_ 0x0 unsafe 1 recovery_mode:0
  444. [ 145.850395] unregistered gadget driver 'g_file_storage'
  445. [ 145.991304] usb0: MAC ee:19:00:00:00:00
  446. [ 145.991316] usb0: HOST MAC ee:49:00:00:00:00
  447. [ 145.991327] g_ether gadget: controller 'fsl-usb2-udc' not recognized; trying CDC Ethernet (ECM)
  448. [ 145.991364] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
  449. [ 145.991383] g_ether gadget: g_ether ready
  450. [ 145.991389] Suspend udc for OTG auto detect
  451. [ 146.039134] fsl-usb2-udc: bind to driver g_ether
  452. [ 202.709761] unregistered gadget driver 'g_ether'
  453. [ 202.713011] ARC USBOTG Device Controller driver unregistered
  454. [ 202.867848] ARC USBOTG Device Controller driver (1 August 2005)
  455. [ 202.891721] fsg_bind:3588 unbind
  456. [ 202.899856] g_file_storage gadget: File-backed Storage Gadget, version: 1 September 2010
  457. [ 202.899871] g_file_storage gadget: Number of LUNs=1
  458. [ 202.899882] Suspend udc for OTG auto detect
  459. [ 202.940585] fsl-usb2-udc: bind to driver g_file_storage
  460. [ 435.221859] max77696_uic_isr: cancel: 0
  461. [ 435.420043] pmic_soda_connects_notify_otg_in:391 OTG!
  462. [ 435.490077] Unknown wakeup.(OTGSC 0x8282b20)
  463. [ 435.630136]
  464. [ 435.630143] Schedule OTG enumeration triggered recovery
  465. [ 435.630550] max77696_uic_adc_work adcval 0 in_otg 1
  466. [ 435.640700] switch to host?
  467. [ 436.179760] usb 1-1: new full speed USB device number 2 using fsl-ehci
  468. [ 436.389792] usb 1-1: device descriptor read/64, error -71
  469. [ 443.650010] otg_enum_fn not enumerated, catcha!
  470. [ 443.656682] usb 1-1: USB disconnect, device number 2
  471. [ 443.666356] fsl_otg_event ID changed to [0] during work
  472. [ 443.666377] asking for device mode and in host mode, thats okay
  473. [ 443.666404] switch to gadget
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!