1c1
< [    0.000000] Linux version 3.10.49 (jyeom@sw2) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 14.07_ltq) ) #1 Wed Jun 27 11:14:59 KST 2018
---
> [    0.000000] Linux version 3.10.49 (jack@GPON-DEV) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 14.07_ltq) ) #1 Tue Oct 25 17:24:32 CST 2016
11c11
< [    0.000000] e=ethaddr=ac:9a:96:00:00:00
---
> [    0.000000] e=ethaddr=40:ee:dd:b5:be:ef
25c25
< [    0.000000] free_area_init_node: node 0, pgdat 80314610, node_mem_map 81003ec0
---
> [    0.000000] free_area_init_node: node 0, pgdat 80312610, node_mem_map 81003ec0
34c34
< [    0.000000] Kernel command line: rootfstype=squashfs,jffs2 ip=::::::off ethaddr=ac:9a:96:00:00:00 machtype=SFP ignore_loglevel vpe1_load_addr=0x83f00000 vpe1_mem=1M mem=63M mtdparts=sflash:256k(uboot)ro,512k(uboot_env),7424k(linux),8192k(image1) console=ttyLTQ0,115200 init=/etc/preinit
---
> [    0.000000] Kernel command line: rootfstype=squashfs,jffs2 ip=192.168.1.10:192.168.1.100:192.168.2.0:255.255.255.0:::off ethaddr=40:ee:dd:b5:be:ef machtype=SFP ignore_loglevel vpe1_load_addr=0x83f00000 vpe1_mem=1M mem=63M mtdparts=sflash:256k(uboot)ro,512k(uboot_env),7424k(linux),8192k(image1) console=ttyLTQ0,115200 init=/etc/preinit
40c40
< [    0.000000] Memory: 60204k/64512k available (2596k kernel code, 4308k reserved, 663k data, 184k init, 0k highmem)
---
> [    0.000000] Memory: 60204k/64512k available (2587k kernel code, 4308k reserved, 664k data, 192k init, 0k highmem)
67,69c67,69
< [    0.192000] config3 0x2425 MT 1
< [    0.192000] MVPControl 0x2, STLB 0 VPC 1 EVP 0
< [    0.192000] mvpconf0 0xb8008403, PVPE 1 PTC 3 M 1
---
> [    0.196000] config3 0x2425 MT 1
> [    0.196000] MVPControl 0x2, STLB 0 VPC 1 EVP 0
> [    0.196000] mvpconf0 0xb8008403, PVPE 1 PTC 3 M 1
73c73
< [    0.228000] io scheduler noop registered
---
> [    0.232000] io scheduler noop registered
77c77
< [    0.264000] m25p80 spi0.0: found w25q128, expected s25fl129p0
---
> [    0.268000] m25p80 spi0.0: found w25q128, expected s25fl129p0
84c84
< [    0.304000] 0x0000001e7cde-0x000000800000 : "rootfs"
---
> [    0.304000] 0x0000001e6e28-0x000000800000 : "rootfs"
87,88c87,88
< [    0.328000] mtd: partition "rootfs_data" created automatically, ofs=0x3e0000, len=0x420000
< [    0.336000] 0x0000003e0000-0x000000800000 : "rootfs_data"
---
> [    0.328000] mtd: partition "rootfs_data" created automatically, ofs=0x400000, len=0x400000
> [    0.336000] 0x000000400000-0x000000800000 : "rootfs_data"
90c90
< [    0.348000] wdt 1f8803f0.watchdog: Init done
---
> [    0.352000] wdt 1f8803f0.watchdog: Init done
94,114c94,125
< [    0.376000] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
< [    0.380000] Freeing unused kernel memory: 184K (80332000 - 80360000)
< [    7.200000] jffs2: notice: (273) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 32 of xref (0 dead, 11 orphan) found.
< [    9.664000] IFXOS, Version 1.6.6 (c) Copyright 2009, Lantiq Deutschland GmbH
< [    9.740000] NET: Registered protocol family 10
< [    9.752000] GPON SFP I2C Slave Driver, Version 2.2.1 (c) Copyright 2015, Lantiq Beteiligungs-GmbH & Co. KG
< [    9.768000] [sfp_i2c] vpe code <sfp_i2c_vpe.bin> with size <3240 bytes> loaded!
< [    9.772000] VPE loader: VPE1 running successfully
< [    9.856000] FALC(tm) ON Optic Driver, version 7.5.1.0 (c) Copyright 2015, Lantiq Beteiligungs-GmbH & Co. KG
< [   10.240000] FALC(tm) ON Base Driver, Version 7.5.1.0 (c) Copyright 2015, Lantiq Beteiligungs-GmbH & Co. KG
< [   10.256000] [onu] GPIO5 stuck detected : PPS/LOS/NTR8K features are not available
< [   10.280000] FALC(tm) ON Ethernet Driver, Version 7.5.1.0 (c) Copyright 2015, Lantiq Beteiligungs-GmbH & Co. KG
< [   22.880000] [onu] GPHY Firmware loaded into RAM (phy11g.bin)
< [   23.148000] [onu] PE[255] firmware loaded v9.90.6.1
< [   56.300000] libphy: Falcon MDIO: probed
< [   56.332000] IPv6: ADDRCONF(NETDEV_UP): host: link is not ready
< [   56.376000] IPv6: ADDRCONF(NETDEV_UP): lct0: link is not ready
< [   57.520000] IPv6: ADDRCONF(NETDEV_UP): lct0: link is not ready
< [   65.896000] IPv6: ADDRCONF(NETDEV_UP): host: link is not ready
< [   67.212000] device exc entered promiscuous mode
< [   67.612000] IPv6: ADDRCONF(NETDEV_CHANGE): lct0: link becomes ready
---
> [   12.424000] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
> [   12.428000] Freeing unused kernel memory: 192K (80330000 - 80360000)
> [   15.280000] pps_core: LinuxPPS API ver. 1 registered
> [   15.284000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
> [   15.296000] PTP clock support registered
> [   19.612000] jffs2: notice: (273) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 27 of xref (0 dead, 6 orphan) found.
> [   22.072000] IFXOS, Version 1.6.6 (c) Copyright 2009, Lantiq Deutschland GmbH
> [   22.148000] NET: Registered protocol family 10
> [   22.168000] GPON SFP I2C Slave Driver, Version 2.2.1 (c) Copyright 2015, Lantiq Beteiligungs-GmbH & Co. KG
> [   22.188000] [sfp_i2c] vpe code <sfp_i2c_vpe.bin> with size <4108 bytes> loaded!
> [   22.192000] VPE loader: VPE1 running successfully
> [   22.288000] FALC(tm) ON Optic Driver, version 7.5.1.0 (c) Copyright 2015, Lantiq Beteiligungs-GmbH & Co. KG
> [   22.708000] FALC(tm) ON Base Driver, Version 7.5.1.0 (c) Copyright 2015, Lantiq Beteiligungs-GmbH & Co. KG
> [   22.728000] [onu] GPIO5 stuck detected : PPS/LOS/NTR8K features are not available
> [   22.744000] FALC(tm) ON Ethernet Driver, Version 7.5.1.0 (c) Copyright 2015, Lantiq Beteiligungs-GmbH & Co. KG
> [   22.768000] mod_f24s: Unknown symbol skb_complete_tx_timestamp (err 0)
> [   22.784000] mod_f24s: Unknown symbol skb_complete_tx_timestamp (err 0)
> [   29.980000] i2c /dev entries driver
> [   30.004000] Custom GPIO-based I2C driver version 0.1.1
> [   30.016000] i2c-gpio i2c-gpio.0: using pins 37 (SDA) and 38 (SCL)
> [   35.728000] [onu] serial number: HWTC8765432d
> [   36.052000] [onu] password:
> [   36.096000] [onu] GPHY Firmware loaded into RAM (phy11g.bin)
> [   36.344000] [onu] PE[255] firmware loaded v9.90.6.0
> [   38.916000] libphy: Falcon MDIO: probed
> [   38.948000] IPv6: ADDRCONF(NETDEV_UP): host: link is not ready
> [   38.996000] IPv6: ADDRCONF(NETDEV_UP): lct0: link is not ready
> [   40.784000] IPv6: ADDRCONF(NETDEV_UP): lct0: link is not ready
> [   46.436000] IPv6: ADDRCONF(NETDEV_UP): host: link is not ready
> [   47.416000] device exc entered promiscuous mode
> [   52.524000] IPv6: ADDRCONF(NETDEV_CHANGE): lct0: link becomes ready
> [ 1061.344000] IPv6: ADDRCONF(NETDEV_CHANGE): host: link becomes ready