API tools faq
paste
Advertisement
SunIight

quantena boot log

SunIight
Sep 28th, 2014
2,710
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 30.74 KB | None | 0 0
raw download clone embed print report
  1. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.09.28 17:29:02 =~=~=~=~=~=~=~=~=~=~=~=
  2. Quantenna Mini U-Boot
  3. Version: v36.5.0.7 Built: 4жњ€ 21 2014 at 15:19:42
  4. Boot reached stage 64
  5. Boot reached stage 65
  6. QTN-EMAC
  7. Boot reached stage 80
  8. 1G-FD
  9. Using QTN-EMAC device
  10. TFTP from server 1.1.1.1; our IP address is 1.1.1.2
  11. Filename 'u-boot.bin'.
  12. Load address: 0x88000000
  13. Loading: *T T T T
  14. Retry count exceeded; starting again
  15. Boot reached stage -81
  16. Boot reached stage 80
  17. 1G-FD
  18. BOOTP broadcast 1
  19. BOOTP broadcast 2
  20.  
  21. Retry count exceeded; starting again
  22. Boot reached stage -81
  23. Boot reached stage 80
  24. 1G-FD
  25. Using QTN-EMAC device
  26. TFTP from server 1.1.1.1; our IP address is 1.1.1.2
  27. Filename 'u-boot.bin'.
  28. Load address: 0x88000000
  29. Loading: *Quantenna Mini U-Boot
  30. Version: v36.5.0.7 Built: 4жњ€ 21 2014 at 15:19:42
  31. Boot reached stage 64
  32. Boot reached stage 65
  33. QTN-EMAC
  34. Boot reached stage 80
  35. LTЙ5
  36. Using QTN-EMAC device
  37. TFTP from server 1.1.1.1; our IP address is 1.1.1.2
  38. Filename 'u-boot.bin'.
  39. Load address: 0x88000000
  40. Loading: *##########д###
  41. done
  42. Bytes transferred = 68848 (0x10cf0)
  43. Boot reached stage 81
  44. Boot reached stage 84
  45. Boot reached stage 13
  46. Boot reached stage 12
  47. Valid CRC found in flash restoring env...
  48. Boot reached stage 11
  49. Reset status: 0x00000002
  50. hw_config_id 65535: 'QHS840_5S1'
  51. Cold boot
  52.  
  53. Info: data uncached: addr=0xc0000000 size=1024MB
  54. Info: text at 0x88014000, stack at 0x88013ffc(8192), heap at 0x88000000(73728), uboot size 173140
  55. Info: i-cache is enabled
  56. Info: d-cache is enabled
  57. Info: CPU freq is 500000000, dev freq is 125000000
  58.  
  59. Info: Quantenna U-Boot version:v36.6.0.7
  60. Info: build date ' 8жњ€ 21 2014', time '23:23:40'
  61.  
  62. SPI flash info:
  63. name : w25x05
  64. jedec_id : 0xef3010
  65. sector size : 4096
  66. number of sector : 16
  67. frequency : 104000000
  68. flags : 0x2
  69. lock :
  70. DDR_INIT: type = 16 speed = 500MHz
  71. BDA at 0x80002000
  72. In: serial
  73. Out: serial
  74. Err: serial
  75. Coot reached stage 64
  76. PHY 0x1cc915 found on MDIO addr:1
  77. Enable phy SSC
  78. Boot reached stage 65
  79. QTN-EMAC
  80. Hit any key to stop autoboot: 2  1  0
  81. Boot reached stage 80
  82. 1G-FD
  83. Using QTN-EMAC device
  84. TFTP from server 1.1.1.1; our IP address is 1.1.1.2
  85. Filename 'topaz-linux.lzma.img'.
  86. Load address: 0x83000000
  87. Loading: *#################дд#д#############ж################д#############
  88. ###д#ж###ц############ж###########д#дд####д#ц#################ж##
  89. #######д####д#################д#########д#######д################CЎюд##жж##д####жц##########дд############д######жжд####ж#д#########ц
  90. ###########ж####ц##############ж##д#####ж#######д#########д####ж#
  91. #######ж#######ж#####дд#######ж####д####д########д#######д######ц
  92. ####дд#######д##########ж######жддддд############################
  93. ##########д######дд##################д#########ж#########ж###д###CЎю#################д##############цж##дд################ж##д####жцж
  94. ###ж###жж##д#############ж###########ц##ц####ж##########д###д####
  95. #дд##############д###############д#цд###д############ж##ж###д####
  96. ##ж#######ж##д####ж#####################д####ц###################
  97. ##д#########д########ц##д#####ц##д##д#####ж###д###########ж##ж#ж#
  98. #######
  99. done
  100. Bytes transferred = 4358750 (0x42825e)
  101. Boot reached stage 81
  102. Boot reached stage 84
  103. Boot reached stage 1
  104. ## Booting kernel from Legacy Image at 83000000 ...
  105. Boot reached stage 2
  106. Boot reached stage 3
  107. Image Name: topaz-linux
  108. Image Type: arc Linux Kernel Image (lzma compressed)
  109. Data Size: 4350558 Bytes = 4.1 MB
  110. Load Address: 846da000
  111. Entry Point: 846da000
  112. Verifying Checksum ... OK
  113. Boot reached stage 4
  114. Boot reached stage 5
  115. Boot reached stage 6
  116. Boot reached stage 14
  117. Uncompressing Kernel Image ... OK
  118. Boot reached stage 7
  119. Boot reached stage 8
  120. Command line TAG setup
  121. Params->u.cmdline.cmdline console=ttyS0,115200n8 earlyprintk=1 hw_config_id=65535
  122. p console=ttyS0,115200n8 earlyprintk=1 hw_config_id=65535
  123. ## Transferring control to Linux (at address 846da000) ATAG parameters 8803bb50 - 8803bba8...
  124. [ 0.000000] Linux version 2.6.35.12 (raymonddev@raymonddev-vm1210) (gcc version 4.2.1 (ARC_2.3)) #2 Thu Aug 21 23:35:41 CST 2014
  125. [ 0.000000] Parsing ATAG parameters from bootloader
  126. [ 0.000000] ATAG_CORE: successful parsing
  127. [ 0.000000] ATAG_CMDLINE: command line = console=ttyS0,115200n8 earlyprintk=1 hw_config_id=65535
  128. [ 0.000000] Board id: 65535
  129. [ 0.000000] ATAG_HW_CONFIG_ID: hw_config_id = 65535
  130. [ 0.000000]
  131. [ 0.000000] Processor Family: ARC 700 [0x33]
  132. [ 0.000000] CPU speed : 500.00 Mhz
  133. [ 0.000000] Timers: TIMER1 TIMER0
  134. [ 0.000000] Interrupt Vect Base: 0x88026800
  135. [ 0.000000] Peripheral Base: NOT present; assuming 0xCOFC0000
  136. [ 0.000000] Data UNCACHED Base (I/O): start 0xc0 Sz, 1024 MB
  137. [ 0.000000] ARC700 MMU Ver [2]
  138. [ 0.000000] PAGE SIZE 8k
  139. [ 0.000000] JTLB 128 x 2 = 256 entries
  140. [ 0.000000] uDTLB 8 entr, uITLB 4 entr
  141. [ 0.000000] TLB Refill "will NOT" Flush uTLBs
  142. [ 0.000000] Detected I-cache :
  143. [ 0.000000] Type=2 way set-assoc, Line length=32, Size=16K (enabled)
  144. [ 0.000000] Detected D-cache :
  145. [ 0.000000] Type=4 way set-assoc, Line length=32, Size=16K (enabled)
  146. [ 0.000000] Extensions:
  147. [ 0.000000] MPY: 32x32 with ANY Result Reg MAC MPY: Dual 16 x 16 and 32 x 16
  148. [ 0.000000] DCCM: N/A ICCM: N/A
  149. [ 0.000000] CRC: N/A, SWAP: Present NORM: Present
  150. [ 0.000000] Min-Max: Present, Barrel Shifter: Present
  151. [ 0.000000] Ext Arith Insn: Present
  152. [ 0.000000] Floating Point Extension: N/A
  153. [ 0.000000] On node 0 totalpages: 16383
  154. [ 0.000000] free_area_init_node: node 0, pgdat 8543d9ac, node_mem_map 854e0024
  155. [ 0.000000] Normal zone: 72 pages used for memmap
  156. [ 0.000000] Normal zone: 0 pages reserved
  157. [ 0.000000] Normal zone: 16311 pages, LIFO batch:3
  158. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16311
  159. [ 0.000000] Kernel command line: console=ttyS0,115200n8 earlyprintk=1 hw_config_id=65535
  160. [ 0.000000] bootconsole [ruby_early0] enabled
  161. [ 0.000000] PID hash table entries: 512 (order: -2, 2048 bytes)
  162. [ 0.000000] Dentry cache hash table entries: 16384 (order: 3, 65536 bytes)
  163. [ 0.000000] Inode-cache hash table entries: 8192 (order: 2, 32768 bytes)
  164. ‚r‚‚‚‚‚ѓкЃMemory: 43408KB available (2134K code,1137K data, 11080K init)
  165. [ 0.000000] Hierarchical RCU implementation.
  166. [ 0.000000] RCU debugfs-based tracing is enabled.
  167. [ 0.000000] Verbose stalled-CPUs detection is disabled.
  168. [ 0.000000] clockevent mode switch to [1]
  169. [ 0.000000] clockevent mode switch to [2]
  170. ‚{‚‚‚‚‚ѓкЃCalibrating delay loop... 248.21 BogoMIPS (lpj=620544)
  171. [ 0.105000] pid_max: default: 4096 minimum: 301
  172. [ 0.110000] Mount-cache hash table entries: 1024
  173. +‚sЉЉЄ‚‚‚кЃStarting run_ksoftirqd, stack (thread_info) at 88010000 cpu 0
  174. [ 0.120000] NET: Registered protocol family 16
  175. [ 0.125000] Topaz heap in SRAM 880164a0<->88020000
  176. ‚{Љљ‚‚‚ѓкЃQuantenna I2C device register
  177. [ 0.140000] bio: create slab <bio-0> at 0
  178. [ 0.145000] Switching to clocksource ARC Timer1
  179. [ 0.155000] NET: Registered protocol family 2
  180. [ 0.160000] IP route cache hash table entries: 2048 (order: 0, 8192 bytes)
  181. [ 0.165000] TCP established hash table entries: 4096 (order: 2, 32768 bytes)
  182. [ 0.170000] TCP bind hash table entries: 4096 (order: 1, 16384 bytes)
  183. ‚{ЉєЄ‚‚ѓкЃTCP: Hash tables configured (established 4096 bind 4096)
  184. [ 0.180000] TCP reno registered
  185. [ 0.185000] NET: Registered protocol family 1
  186. [ 0.650000] JFFS2 version 2.2. (NAND) Вj’‚‚Љk’‚‚І’•‘ЃHat, Inc.
  187. [ 0.655000] msgmni has been set to 84
  188. [ 0.655000] io scheduler noop registered (default)
  189. [ 1.085000] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
  190. [ 1.095000] serial8250.0: ttyS0 at MMIO 0xf0000000 (irq = 48) is a 16550A
  191. [ 1.100000] console [ttyS0] enabled, bootconsole disabled
  192. [ 1.100000] console [ttyS0] enabled, bootconsole disabled
  193. [ 1.105000] brd: module loaded
  194. [ 1.115000] loop: module loaded
  195. [ 1.120000] Creating 3 MTD partitions on "spi_flash":
  196. [ 1.125000] 0x000000000000-0x000000005000 : "uboot"
  197. [ 1.135000] 0x000000005000-0x00000000b000 : "uboot_env"
  198. [ 1.140000] 0x00000000b000-0x000000010000 : "data"
  199. [ 1.150000] spi_flash: SPI flash driver initialized successfully!
  200. [ 1.155000] ruby_health loading
  201. [ 1.650000] topaz_hbm_init_pool_list pool 0 pool_list 0x88000000 bus_range 0x4ac000 to 0x24ac000 sz 4096 count 8192
  202. [ 1.650000] topaz_hbm_init_pool_list pool 1 pool_list 0x88008000 bus_range 0x24ac000 to 0x46ac000 sz 17408 count 2048
  203. [ 1.650000] topaz_hbm_init_pool_list pool 3 pool_list 0x8800a000 bus_range 0x0 to 0x0 sz 0 count 4096
  204. [ 1.655000] topaz_busmon_init success
  205. [ 1.660000] topaz_temp_sens_init success
  206. [ 1.665000] u32 classifier
  207. +ЉsІє‚‚‚‚кЃ input device check on
  208. [ 1.670000] Actions configured
  209. [ 1.675000] Netfilter messages via NETLINK v0.30.
  210. [ 1.680000] nf_conntrack version 0.5.0 (678 buckets, 2712 max)
  211. +ЉsІВЄ‚‚‚кЃip_tables: (C) 2000-2006 Netfilter Core Team
  212. [ 1.690000] TCP cubic registered
  213. [ 1.690000] NET: Registered protocol family 10
  214. [ 1.700000] NET: Registered protocol family 17
  215. [ 1.705000] 802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
  216. [ 1.710000] All bugs added by David S. Miller <[email protected]>
  217. [ 1.720000] Freeing unused kernel memory: 11080k freed [846da000] TO [851ac000]
  218. [ 1.725000] Common mmap addr-space starts 2b0f0000
  219.  
  220. init started: BusyBox v1.10.3 (2014-08-21 23:24:37 CST)
  221.  
  222. starting pid 36, tty '': '/etc/init.d/rcS'
  223. Starting portmap: done
  224. Initializing random number generator... done.
  225. [ 2.080000] load_module: 'bootcfg' using DRAM (offset:0x861f0000, size:0x8f08)
  226. current qtn_hw_config name: QHS840_5S1
  227. current qtn_hw_config wifi_hw: 8
  228. Starting network...
  229. [ 2.730000] load_module: 'rtl8367b' using DRAM (offset:0x86240000, size:0x32435)
  230. [ 2.735000] rtl8367b: module license 'unspecified' taints kernel.
  231. ’{єў‚‚‚ѓкЃDisabling lock debugging due to kernel taint
  232. XuTTY+’sВ‚‚‚‚‚кЃload_module: 'emaclib' using DRAM (offset:0x86280000, size:0x509e)
  233. [ 2.905000] load_module: 'dpi' using DRAM (offset:0x86194000, size:0x1bb9)
  234. [ 2.935000] load_module: 'fwt_if' using DRAM (offset:0x8788e640, size:0x1168)
  235. [ 2.965000] load_module: 'switch_tqe' using DRAM (offset:0x86218000, size:0x36ef)Cб[ 2.990000] tqe_descs_alloc: 512 tqe_rx_descriptors at kern uncached 0x550e04a8 bus 0x800164a8
  236. [ 3.030000] load_module: 'fwt_ctrl' using DRAM (offset:0x862a0000, size:0x1f091)
  237. [ 3.085000] load_module: 'switch_emac' using DRAM (offset:0x86198000, size:0x179d)Cб[ 3.120000] topaz_emac_init, emac0
  238. [ 3.125000] Random stuff 96
  239. [ 3.785000] emac_eth_mii: probed
  240. [ 3.785000] emac_lib eth1_emac0: index 0 id 0x1cc915 addr 0
  241. [ 3.790000] emac_lib eth1_emac0: index 1 id 0x1cc915 addr 1
  242. [ 3.795000] emac_lib eth1_emac0: phy_id 0x1cc915 addr 1
  243. [ 3.835000] emac_lib eth1_emac0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mdio_bus, irq=-1)
  244. [ 3.845000] topaz_dpi_init initialized for emac0
  245. [ 3.850000] topaz_emac_init, emac1
  246. љ{ВєЄ‚‚ѓкЃtopaz_dpi_init initialized for emac1
  247. PuTTYemac0 is eth1_1, emac1 is eth1_0
  248. Stateless mode. Using temporary ip address:
  249. cat: can't open '/mnt/jffs2/nvram.txt': No such file or directory
  250. ------------------------------
  251. ------------------------------
  252. Using IP address 169.254.39.2
  253. Using netmask 255.255.255.0
  254. +ўs’’Є‚‚‚кЃemac_lib eth1_0: force link (1000/Full)
  255. +ўsЄ‚‚‚‚‚кЃdevice eth1_0 entered promiscuous mode
  256. [ 4.520000] br0: port 1(eth1_0) entering forwarding state
  257. [ 4.525000] br0: port 1(eth1_0) entering forwarding state
  258. sed: mnt/jffs2/wireless_conf.txt: No such file or directory
  259. [ 4.600000] device eth1_1 entered promiscuous mode
  260. [ 4.605000] br0: port 2(eth1_1) entering forwarding state
  261. [ 4.610000] br0: port 2(eth1_1) entering forwarding state
  262. [ 4.615000] FWT: [d4:ca:6d:33:41:a3] add entry, port:emac1 node:0 entries:1
  263. /sbin/ifup -a
  264. [ 4.740000] FWT: [78:24:af:93:af:f0] add entry, port:emac1 node:0 entries:2
  265. ifconfig: SIOCSIFNETMASK: Cannot assign requested address
  266. ZЦЅ№™ig: SIOCSIFNETMASK: Cannot assign requested address
  267. [ 4.905000] eth1_1: link up (1000/Full)
  268. [ 4.905000] FWT: [90:2b:34:5e:70:42] add entry, port:emac0 node:0 entries:3
  269. Telnet disabled
  270. Starting wireless...
  271. [ 5.215000] FWT: [3c:4a:92:74:35:e8] add entry, port:emac0 node:0 entries:4
  272. [ 5.220000] FWT: [ac:f2:c5:35:37:2a] add entry, port:emac0 node:0 entries:5
  273. -----------------------------------------------------------------
  274. -----------------------------------------------------------------
  275. Creating wireless_conf.txt from default_config.txt
  276. [restore] change pwr from 19 to 23
  277. [ 5.900000] FWT: [d8:50:e6:f3:36:64] add entry, port:emac0 node:0 entries:6
  278. [5G] ccode_5g us found, set wireless driver and update to wireless_conf
  279. complete
  280. rm: cannot remove '/scripts/router_command.sh': No such file or directory
  281. === Waiting for stateless slave to boot
  282. [ 9.875000] FWT: [00:0c:29:00:2b:eb] add entry, port:emac0 node:0 entries:7
  283. [ 10.450000] FWT: [a8:20:66:12:17:ef] add entry, port:emac0 node:0 entries:8
  284. [ 10.455000] FWT: [84:34:97:b5:84:38] add entry, port:emac1 node:0 entries:9
  285. OOOљСarting stateless slave configuration
  286. === Setting bf to 1
  287. complete
  288. [ 11.705000] FWT: [60:51:2c:42:77:20] add entry, port:emac1 node:0 entries:10
  289. === Setting bw to 80
  290. ¬« ±•te
  291. === Setting channel to 149
  292. complete
  293. === Setting mode to ap
  294. complete
  295. === Setting pwr to 23
  296. complete
  297. === Setting region to us
  298. Jan 1 00:00:12 qcsapi_regulatory_database[477]: database /proc/bootcfg/qtn_regulatory_db.bin is loaded.
  299.  
  300.  
  301. complete
  302. === Setting staticip to 1
  303. ¬« ±•te
  304. === Setting vht to 1
  305. complete
  306. OOO’Хnning start-prod
  307. complete
  308. cat: can't open '/mnt/jffs2/nvram.txt': No such file or directory
  309. === waiting start-prod
  310. ------------------------------
  311. ------------------------------
  312. Using IP address 169.254.39.2
  313. Using netmask 255.255.255.0
  314. Noading modules
  315. [ 13.980000] load_module: 'qtn_debug' using DRAM (offset:0x86216000, size:0x403)
  316. [ 14.040000] load_module: 'i2cbus' using DRAM (offset:0x862f9000, size:0xbb2)
  317. [ 14.065000] se95-i2c : I2C driver register code = 0
  318. [ 14.130000] load_module: 'qtsens' using DRAM (offset:0x86216800, size:0x7bf)
  319. [ 14.150000] temp_sensor: (SE95) has not been detected
  320. [ 14.225000] load_module: 'pm_interval' using DRAM (offset:0x86384000, size:0x13b2)
  321. [ 14.325000] load_module: 'wlan' using DRAM (offset:0x86400000, size:0x5deb1)
  322. [ 14.535000] wlan: 0.8.4.2 (0.9.3.3)
  323. [ 14.685000] load_module: 'radar' using DRAM (offset:0x863c0000, size:0x19ded)
  324. [ 14.735000] load_module: 'qvspmod' using DRAM (offset:0x863a0000, size:0x10503)
  325. [ 14.820000] load_module: 'qdrv' using DRAM (offset:0x86500000, size:0x7cc58)
  326. [ 15.050000] load_module: 'wlan_xauth' using DRAM (offset:0x862ea800, size:0x32f)
  327. ЉЄ{Љ’‚‚‚ѓкЃload_module: 'wlan_ccmp' using DRAM (offset:0x8639e000, size:0x17b6)
  328. PuTTY+ЉЄs’‚‚‚‚‚кЃload_module: 'wlan_tkip' using DRAM (offset:0x863f4000, size:0x265e)
  329. [RT-AC87U] start syslogd
  330. Noading MuC driver (qtn_driver.qtn_ruby.0.bin)
  331. Waiting for Wireless Events from interfaces...
  332. MYROUTER: wifi_mode=[ap]
  333. [ 16.125000] MuC: uc_print_initialise_shared_data linux buf 557c1a80
  334. [ 16.130000] MuC: build date=Wed Aug 13 18:40:49 PDT 2014
  335. [ 16.135000] MuC: slow heap begin=0x001d3a20 end=0x0032fa20
  336. [ 16.140000] MuC: fast heap begin=0x800307a0 end=0x800387a0
  337. [ 16.145000] MuC: stack start=0x8003efc0 sp=0x8003f724
  338. ЉІ{ЉЄ‚‚‚ѓкЃMuC: calstate is 3 (prod), dcache on
  339. [ 16.155000] MuC: scancnt=4
  340. [ 16.155000] MuC: 4x4 11ac FO RGMII/PCIe QV840
  341. PuTTY[ 16.225000] MuC: RFIC version = 1
  342. [ 16.240000] MuC: os_uc, after bb_rf_complete_attach.
  343. [ 16.245000] MuC: fd start=0xe5040300 count=48 size=108 end=0xe5041740
  344. ЉІ{’Є‚‚‚ѓкЃMuC: TX QoS schedule=0
  345. [ 16.255000] MuC: dynamic one-bit autocorrelation enabled
  346. [ 16.260000] MuC: bbrf_get_RFIC_freqID 1 g_proj_ID 1
  347. [ 16.265000] MuC: enable IRQs
  348. [ 16.270000] MuC: Wait for AuC ready
  349. [ 16.270000] MuC: Sync with AuC
  350. [ 16.275000] MuC: AuC is booted: 0xe5100ba4:0x6005e918 auc ilink addr: 0xe510025c:0xe5100260
  351. [ 16.280000] MuC: node stats - 0x6005d258
  352. [ 16.280000] MuC: vap stats - 0x6005e5d8
  353. [ 16.285000] AuC: uc_print_initialise_shared_data linux buf 55fc01f8
  354. [ 16.290000] qdrv_wlan_80211_init rf_chipid 1
  355. [ 16.295000] QDRV: power adjust scancnt=0
  356. [ 16.300000] QDRV: using default temperature profile
  357. [ 16.305000] QDRV: could not read temperature sensor
  358. Pu[ 16.310000] MuC boot succeeded 0.095 seconds
  359. TTY[ 16.395000] load_module: 'wlan_scan_ap' using DRAM (offset:0x864ea000, size:0x1f66)
  360. [ 16.515000] MuC: bbrf_get_RFIC_freqID 1 g_proj_ID 1
  361. [ 16.545000] VAP create succeeded 0.020 seconds
  362. Ѓ 16.815000] set_cap_bw: ic_phymode = 13
  363. [ 16.860000] MuC: g_calibration_algo_ver_to_report_dciq == 0x801
  364. copy /scripts/sysdeps/RT-AC87U/tx_power to /etc/
  365. U:uЃccode_5g us found, set wireless driver and update to wireless_conf
  366. radar in 80MHZ mode
  367. version of /proc/bootcfg/qtn_regulatory_db.bin is v36.5.0.4
  368. wersion of /etc/qtn_regulatory_db.bin is v36.6.0.3
  369. Select database version: v36.6.0.3
  370. Configuring to load /etc/qtn_regulatory_db.bin
  371. [ 17.725000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (52)
  372. [ 17.730000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (56)
  373. [ 17.735000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (60)
  374. [ 17.740000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (64)
  375. [ 17.745000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (100)
  376. [ 17.750000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (104)
  377. Љє{єЄЄ‚‚ѓкЃieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (108)
  378. [ 17.760000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (112)
  379. Ѓ 17.765000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (116)
  380. [ 17.770000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (120)
  381. [ 17.775000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (124)
  382. [ 17.780000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (128)
  383. [ 17.785000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (132)
  384. [ 17.790000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (136)
  385. [ 17.795000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (140)
  386. [ 17.800000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (144)
  387. PuTTYradar start with regulatory us
  388. [ 18.825000] OCAC: parameters updated, country_code: 840
  389. +ЉКs‚ў‚‚‚‚кЃdevice wifi0 entered promiscuous mode
  390. [ 19.150000] Enabling SSDP flooding
  391. Enabling beamforming
  392. 802.11ac Enabled
  393. [ 19.675000] qdrv_sch_red: available tokens (8) is not enough
  394. ЉК{ІВ‚‚‚ѓкЃqdrv_sch_red: attached to eth1_0
  395. PuTTYSCS disabled
  396. SP: load profile off
  397. +’‚s‚Є‚‚‚‚кЃqvsp_ioctl_rule_del_index: rule delete done
  398. [ 20.055000] qvsp_strm_reset: stream reset
  399. VSP enabled: 0
  400. .K’бsts: unknown operand
  401. [ 20.360000] start ba_setup detect timer
  402. [ 20.745000] [2]Comparing register set Global control
  403. [ 20.765000] [6]Comparing register set BB Global regs
  404. RT-AC87U: monitor led
  405. ­‹‹+±±й monitor_wifi: no process killed
  406. ЁЙЙҐ•r ID 0, uboot update flag 0
  407. complete
  408. complete
  409. [ 21.985000] FWT: [01:00:5e:00:01:01] add entry, port:emac1 node:0 entries:11
  410. === Setting security parameters
  411. OOOљ•tting AP parameters
  412. === Setting SSID to ******
  413. ¬« ±•С•5
  414. === Setting Authentication protocol to 11i
  415. complete
  416. === Setting WPA encryption mode to AESEncryption
  417. complete
  418. === Setting WPA authentication mode to PSKAuthentication
  419. complete
  420. === Setting passphrase to ******
  421. complete
  422. === Starting wireless
  423. [ 24.120000] MuC: Soft TQE ring init. emac0 size = 1024, emac1 size = 1024
  424. [ 24.125000] MuC: RALG: Error 11ac 4ss table index 22 rate 22 has incorrect higher rate 13
  425. [ 24.130000] MuC: RALG: Error 11ac 4ss table index 33 rate 34 has incorrect higher rate 24
  426. Ѓ 24.135000] AuC: triple: free 0 rxq 8 8 64 descriptors: addr 0x80040100 size 1280 rx status: addr 0x80040600 size 2560
  427.  
  428. [ 24.140000] AuC: last_ilink1 addr=0xe510025c, last_ilink2 addr=0xe5100260
  429.  
  430. [ 24.145000] AuC: AuC rx watchdog started
  431.  
  432. [ 24.155000] WPS: push button is not configured
  433. [ 24.160000] MuC: WMM AC 0:3,4,6,0 1:7,4,10,0 2:1,3,4,188 3:1,2,3,188
  434. [ 24.165000] br0: port 3(wifi0) entering forwarding state
  435. [ 24.170000] br0: port 3(wifi0) entering forwarding state
  436. start-prod: adding default "manufacturer=ASUS" to /mnt/jffs2/hostapd.conf
  437. /WЙСµprod: adding default "device_name=Router" to /mnt/jffs2/hostapd.conf
  438. start-prod: adding default "model_name=Router" to /mnt/jffs2/hostapd.conf
  439. .WЙСµprod: adding default "model_number=QV860.00" to /mnt/jffs2/hostapd.conf
  440. start-prod: adding default "serial_number=7824AF93AFF4" to /mnt/jffs2/hostapd.conf
  441. start-prod: adding default "friendly_name=UPnP Access Point" to /mnt/jffs2/hostapd.conf
  442. /WЙСµprod: adding default "device_type=6-0050F204-1" to /mnt/jffs2/hostapd.conf
  443. [ 24.830000] br0: port 3(wifi0) entering forwarding state
  444. +’Є{Іє‚‚‚ѓкЃbr0: port 3(wifi0) entering forwarding state
  445. [ 25.675000] br0: port 3(wifi0) entering forwarding state
  446. complete
  447. === Applying security configuration
  448. Wait 20 seconds to start stateless
  449. S55rpc startup
  450.  
  451. starting pid 1061, tty '/dev/console': '/bin/sh -l'
  452. љЌЙҐБСНЅcmdloop starting /sbin/call_qcsapi_rpcd, at 00:00:26 up 0 min, load average: 0.40, 0.09, 0.03
  453. /scripts/cmdloop starting /sbin/qcsapi_rpcd, at 00:00:26 up 0 min, load average: 0.40, 0.09, 0.03
  454.  
  455.  
  456. BusyBox v1.10.3 (2014-08-21 23:24:37 CST) built-in shell (ash)
  457. Enter 'help' for a list of built-in commands.
  458.  
  459. /scripts/cmdloop starting /sbin/rmt_qcsapi_server, at 00:00:26 up 0 min, load average: 0.40, 0.09, 0.03
  460. quantenna # PuTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTYcomplete
  461. === Apply some hardware wireless setting
  462. OOOљ•tting IP address and netmask to 169.254.39.75
  463. === skip get tweak_qcomm
  464. === Done setting up stateless slave
  465. [ 28.060000] (RF,BB) = (12, 3), (12, 3), (12, 0), (12, 10)
  466. [ 28.065000] Voltage = 106, 130, 195, 296
  467. [ 28.070000] TEMPERATURE_RFIC_EXTERAL= 0.0
  468. [ 28.070000] TEMPERATURE_RFIC_INTERAL = 44.1
  469. [ 28.090000] set_cap_bw: ic_phymode = 13
  470. [ 28.165000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (52)
  471. ’В{Љє‚‚‚ѓкЃieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (56)
  472. [ 28.180000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (60)
  473. [ 28.185000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (64)
  474. [ 28.190000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (100)
  475. [ 28.195000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (104)
  476. [ 28.200000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (108)
  477. [ 28.205000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (112)
  478. [ 28.210000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (116)
  479. [ 28.215000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (120)
  480. [ 28.220000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (124)
  481. [ 28.225000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (128)
  482. [ 28.230000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (132)
  483. [ 28.235000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (136)
  484. [ 28.240000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (140)
  485. [ 28.245000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (144)
  486. PuTTYradar start with[ 29.250000] qdrv_radar_enable: ERROR - radar already enabled
  487. regulatory us
  488. [ 29.260000] OCAC: parameters updated, country_code: 840
  489. [ 31.875000] wifi0: station 10:08:c1:05:b8:ec associated, tot=1/1
  490. [ 31.930000] wifi0: station 10:08:c1:05:b8:ec disassociated, tot=0/0
  491. [ 31.955000] (RF,BB) = (12, 3), (12, 3), (12, 0), (12, 10)
  492. [ 31.960000] Voltage = 107, 130, 194, 474
  493. [ 31.965000] TEMPERATURE_RFIC_EXTERAL= 0.0
  494. [ 31.965000] TEMPERATURE_RFIC_INTERAL = 44.1
  495. [ 32.350000] FWT: [00:0c:29:2f:56:c3] add entry, port:emac0 node:0 entries:12
  496. [ 32.355000] FWT: [00:0c:29:f2:58:b9] add0entry, port:emac0 node:0 entries:13
  497. [ 32.360000] FWT: [00:0c:29:1f:d0:5f] add entry, port:emac0 node:0 entries:14
  498. [ 32.395000] FWT: [00:0c:29:c2:74:02] add entry, port:emac0 node:0 entries:15
  499. [ 32.585000] wifi0: station 10:08:c1:05:b8:ec associated, tot=1/1
  500. [ 32.625000] FWT: [10:08:c1:05:b8:ec] add entry, port:wmac node:6 entries:16
  501. [ 35.890000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
  502. [ 35.895000] Voltage = 477, 469, 506, 475
  503. [ 35.895000] TEMPERATURE_RFIC_EXTERAL= 0.0
  504. [ 35.900000] TEMPERATURE_RFIC_INTERAL = 44.1
  505. [ 36.300000] wifi0: [10:08:c1:05:b8:ec] block ack allowed by peer tid: 0 size 16
  506. +љІ{љ‚Є‚‚ѓкЃwifi0: [10:08:c1:05:b8:ec] block ack allowed by peer tid: 6 size 16
  507. [ 36.380000] FWT: [01:00:5e:00:00:fa] add entry, port:wmac node:6 entries:17
  508. [ 39.830000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
  509. [ 39.835000] Voltage = 477, 470, 506, 470
  510. [ 39.835000] TEMPERATURE_RFIC_EXTERAL= 0.0
  511. [ 39.840000] TEMPERATURE_RFIC_INTERAL = 44.1
  512. +ўљsВ’Є‚‚‚кЃ(RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
  513. [ 43.830000] Voltage = 477, 467, 506, 472
  514. [ 43.830000] TEMPERATURE_RFIC_EXTERAL= 0.0
  515. [ 43.835000] TEMPERATURE_RFIC_INTERAL = 44.1
  516. [ 47.400000] wifi0: station 38:aa:3c:0f:45:c7 associated, tot=2/2
  517. [ 47.460000] FWT: [38:aa:3c:0f:45:c7] add entry, port:wmac node:7 entries:18
  518. [ 47.825000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
  519. [ 47.830000] Voltage = 475, 465, 506, 468
  520. [ 47.830000] TEMPERATURE_RFIC_EXTERAL= 0.0
  521. [ 47.835000] TEMPERATURE_RFIC_INTERAL = 44.1
  522. ўВ{‚љ‚‚‚ѓкЃwifi0: [38:aa:3c:0f:45:c7] block ack allowed by peer tid: 0 size 8
  523. PuTTYЃ 49.440000] wifi0: [38:aa:3c:0f:45:c7] block ack allowed by peer tid: 6 size 8
  524. [ 51.820000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
  525. [ 51.825000] Voltage = 460, 444, 494, 472
  526. [ 51.825000] TEMPERATURE_RFIC_EXTERAL= 0.0
  527. [ 51.830000] TEMPERATURE_RFIC_INTERAL = 44.1
  528. [ 55.820000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
  529. [ 55.825000] Voltage = 452, 453, 494, 470
  530. [ 55.825000] TEMPERATURE_RFIC_EXTERAL= 0.0
  531. [ 55.830000] TEMPERATURE_RFIC_INTERAL = 44.1
  532. [ 59.900000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
  533. [ 59.905000] Voltage = 452, 468, 505, 467
  534. ЄКsК‚Є‚‚‚кЃTEMPERATURE_RFIC_EXTERAL= 0.0
  535. [ 59.910000] TEMPERATURE_RFIC_INTERAL = 44.1
  536. P]Uэ[ 63.835000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
  537. [ 63.840000] Voltage = 503, 442, 506, 470
  538. [ 63.840000] TEMPERATURE_RFIC_EXTERAL= 0.0
  539. [ 63.845000] TEMPERATURE_RFIC_INTERAL = 44.1
  540. [ 67.830000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
  541. [ 67.835000] Voltage = 502, 466, 505, 465
  542. [ 67.835000] TEMPERATURE_RFIC_EXTERAL= 0.0
  543. [ 67.840000] TEMPERATURE_RFIC_INTERAL = 44.1
  544. [ 71.830000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
  545. [ 71.835000] Voltage = 472, 465, 504, 469
  546. [ 71.835000] TEMPERATURE_RFIC_EXTERAL= 0.0
  547. [ 71.840000] TEMPERATURE_RFIC_INTERAL = 44.1
  548. [ 75.830000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
  549. [ 75.835000] Voltage = 473, 464, 505, 468
  550. [ 75.835000] TEMPERATURE_RFIC_EXTERAL= 0.0
  551. [ 75.840000] TEMPERATURE_RFIC_INTERAL = 44.1
  552. +єКsВљ‚‚‚‚кЃ(RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
  553. [ 79.835000] Voltage = 472, 466, 505, 466
  554. [ 79.835000] TEMPERATURE_RFIC_EXTERAL= 0.0
  555. [ 79.840000] TEMPERATURE_RFIC_INTERAL = 44.1
  556. [ 81.640000] wifi0: [38:aa:3c:0f:45:c7] block ack allowed by peer tid: 1 size 8
  557. [ 83.830000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
  558. +ВљsВљЄ‚‚‚кЃ Voltage = 451, 465, 492, 469
  559. [ 83.835000] TEMPERATURE_RFIC_EXTERAL= 0.0
  560. +ВљsВў‚‚‚‚кЃTEMPERATURE_RFIC_INTERAL = 44.1
  561. [ 87.830000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
  562. [ 87.835000] Voltage = 473, 462, 504, 468
  563. [ 87.835000] TEMPERATURE_RFIC_EXTERAL= 0.0
  564. [ 87.840000] TEMPERATURE_RFIC_INTERAL = 44.1
  565. [ 90.590000] FWT: [01:00:5e:00:00:fa] add IPv4: 239.0.0.2500port:emac0 node:0
  566. [ 91.810000] FWT: [01:00:5e:00:01:3c] add entry, port:emac1 node:0 entries:19
  567. [ 91.840000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
  568. КЉ{ВўЄ‚‚ѓкЃ Voltage = 469, 465, 498, 469
  569. КЉ{ВўЄ‚‚ѓкЃTEMPERATURE_RFIC_EXTERAL= 0.0
  570. [ 91.850000] TEMPERATURE_RFIC_INTERAL = 44.1
  571. PuTTYPuTTY[ 91.990000] FWT: [01:00:5e:40:98:8f] add entry, port:emac0 node:0 entries:20
  572. [ 94.960000] FWT: [01:00:5e:28:a8:a8] add entry, port:emac0 node:0 entries:21
  573. [ 95.830000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
  574. [ 95.835000] Voltage = 450, 464, 505, 467
  575. [ 95.835000] TEMPERATURE_RFIC_EXTERAL= 0.0
  576. [ 95.840000] TEMPERATURE_RFIC_INTERAL = 45.3
  577. Ѓ 99.830000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
  578. [ 99.835000] Voltage = 471, 464, 504, 467
  579. [ 99.835000] TEMPERATURE_RFIC_EXTERAL= 0.0
  580. [ 99.840000] TEMPERATURE_RFIC_INTERAL = 44.1
  581. [ 103.825000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
  582. [ 103.830000] Voltage = 470, 463, 504, 467
  583. [ 103.835000] TEMPERATURE_RFIC_EXTERAL= 0.0
  584. [ 103.835000] TEMPERATURE_RFIC_INTERAL = 44.1
  585. [ 107.835000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
  586. Љ‚є{Вў‚‚‚ѓкЃ Voltage = 470, 463, 505, 465
  587. [ 107.840000] TEMPERATURE_RFIC_EXTERAL= 0.0
  588. [ 107.845000] TEMPERATURE_RFIC_INTERAL = 45.3
  589. PuTTY[ 111.830000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
  590. [ 111.835000] Voltage = 470, 462, 504, 468
  591. [ 111.835000] TEMPERATURE_RFIC_EXTERAL= 0.0
  592. [ 111.840000] TEMPERATURE_RFIC_INTERAL = 44.1
  593. [ 115.830000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
  594. [ 115.835000] Voltage = 468, 463, 505, 468
  595. [ 115.835000] TEMPERATURE_RFIC_EXTERAL= 0.0
  596. [ 115.840000] TEMPERATURE_RFIC_INTERAL = 45.3
  597. [ 119.060000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
  598. [ 119.065000] Voltage = 438, 464, 504, 462
  599. [ 119.065000] TEMPERATURE_RFIC_EXTERAL= 0.0
  600. [ 119.070000] TEMPERATURE_RFIC_INTERAL = 45.3
  601. [ 121.445000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
  602. [ 121.450000] Voltage = 469, 463, 505, 466
  603. [ 121.450000] TEMPERATURE_RFIC_EXTERAL= 0.0
  604. [ 121.455000] TEMPERATURE_RFIC_INTERAL = 45.3
  605. [ 124.815000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
  606. [ 124.820000] Voltage = 470, 464, 492, 466
  607. [ 124.820000] TEMPERATURE_RFIC_EXTERAL= 0.0
  608. [ 124.825000] TEMPERATURE_RFIC_INTERAL = 45.3
  609. [ 128.815000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
  610. [ 128.820000] Voltage = 470, 463, 504, 462
  611. [ 128.820000] TEMPERATURE_RFIC_EXTERAL= 0.0
  612. [ 128.825000] TEMPERATURE_RFIC_INTERAL = 45.3
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!