API tools faq
paste
Advertisement
Guest User

Untitled

a guest
May 22nd, 2017
59
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 8.50 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 2.6.34-rc3-08871-g3b1a1a4 (nokia@ravenclaw) (gcc version 4.3.2 (Sourcery G++ Lite 2008q3-72) ) #3 Sat May 1 22:21:34 CEST 2010
  2. [ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f
  3. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  4. [ 0.000000] Machine: Nokia RX-51 board
  5. [ 0.000000] Ignoring unrecognised tag 0x414f4d50
  6. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  7. [ 0.000000] OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp )
  8. [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
  9. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
  10. [ 0.000000] Kernel command line: ip=192.168.2.15:192.168.2.1 root=/dev/nfs nfsroot=192.168.2.1:/home/nokia/netboot rootdelay=5 rw console=tty0 console=8
  11. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  12. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  13. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  14. [ 0.000000] Memory: 128MB 128MB = 256MB total
  15. [ 0.000000] Memory: 249120k/249120k available, 13024k reserved, 0K highmem
  16. [ 0.000000] Virtual kernel memory layout:
  17. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  18. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  19. [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  20. [ 0.000000] vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB)
  21. [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
  22. [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  23. [ 0.000000] .init : 0xc0008000 - 0xc002b000 ( 140 kB)
  24. [ 0.000000] .text : 0xc002b000 - 0xc0354000 (3236 kB)
  25. [ 0.000000] .data : 0xc0370000 - 0xc050f680 (1662 kB)
  26. [ 0.000000] Hierarchical RCU implementation.
  27. [ 0.000000] NR_IRQS:402
  28. [ 0.000000] Clocking rate (Crystal/Core/MPU): 19.2/332/500 MHz
  29. [ 0.000000] Reprogramming SDRC clock to 332000000 Hz
  30. [ 0.000000] GPMC revision 5.0
  31. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
  32. [ 0.000000] Total of 96 interrupts on 1 active controller
  33. [ 0.000000] OMAP GPIO hardware version 2.5
  34. [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
  35. [ 0.000000] Console: colour dummy device 80x30
  36. [ 0.000000] console [tty0] enabled
  37. [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
  38. [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
  39. [ 0.000000] ... MAX_LOCK_DEPTH: 48
  40. [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
  41. [ 0.000000] ... CLASSHASH_SIZE: 4096
  42. [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
  43. [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
  44. [ 0.000000] ... CHAINHASH_SIZE: 16384
  45. [ 0.000000] memory used by lock dependency info: 3951 kB
  46. [ 0.000000] per task-struct memory footprint: 2304 bytes
  47. [ 0.000000] Calibrating delay loop... 498.87 BogoMIPS (lpj=1945600)
  48. [ 0.000000] Security Framework initialized
  49. [ 0.000000] Mount-cache hash table entries: 512
  50. [ 0.000000] CPU: Testing write buffer coherency: ok
  51. [ 0.000000] regulator: core version 0.5
  52. [ 0.000000] NET: Registered protocol family 16
  53. [ 3.465362] OMAP DMA hardware revision 4.0
  54. [ 3.465545] Reserving DMA channels 0 and 1 for HS ROM code
  55. [ 3.509216] bio: create slab <bio-0> at 0
  56. [ 3.524841] usbcore: registered new interface driver usbfs
  57. [ 3.526763] usbcore: registered new interface driver hub
  58. [ 3.527923] usbcore: registered new device driver usb
  59. [ 3.529144] i2c_omap i2c_omap.1: bus 1 rev3.12 at 2200 kHz
  60. [ 3.542114] twl4030: PIH (irq 7) chaining IRQs 368..375
  61. [ 3.542358] twl4030: power (irq 373) chaining IRQs 376..383
  62. [ 3.544860] twl4030: gpio (irq 368) chaining IRQs 384..401
  63. [ 3.553649] regulator: VUSB1V5: 1500 mV normal standby
  64. [ 3.555938] regulator: VUSB1V8: 1800 mV normal standby
  65. [ 3.558532] regulator: VUSB3V1: 3100 mV normal standby
  66. [ 3.570831] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
  67. [ 3.574615] regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
  68. [ 3.576904] regulator: VDAC: 1800 mV normal standby
  69. [ 3.579345] regulator: VCSI: 1800 mV normal standby
  70. [ 3.581970] regulator: VMMC2_IO_18: 1800 mV normal standby
  71. [ 3.584289] regulator: V28: 2800 mV normal standby
  72. [ 3.586730] regulator: VMMC2_30: 2800 <--> 3000 mV at 2800 mV normal standby
  73. [ 3.589508] regulator: VCAM_ANA_28: 2800 mV normal standby
  74. [ 3.590270] i2c_omap i2c_omap.2: bus 2 rev3.12 at 100 kHz
  75. [ 3.591644] i2c_omap i2c_omap.3: bus 3 rev3.12 at 400 kHz
  76. [ 3.595336] Advanced Linux Sound Architecture Driver Version 1.0.22.1.
  77. [ 3.603057] cfg80211: Calling CRDA to update world regulatory domain
  78. [ 3.604858] Switching to clocksource 32k_counter
  79. [ 3.615264] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
  80. [ 3.616149] musb_hdrc musb_hdrc: USB Peripheral mode controller at fa0ab000 using DMA, IRQ 92
  81. [ 3.617645] NET: Registered protocol family 2
  82. [ 3.618621] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
  83. [ 3.621276] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  84. [ 3.621917] TCP bind hash table entries: 8192 (order: 6, 327680 bytes)
  85. [ 3.627685] TCP: Hash tables configured (established 8192 bind 8192)
  86. [ 3.627838] TCP reno registered
  87. [ 3.627899] UDP hash table entries: 128 (order: 1, 12288 bytes)
  88. [ 3.628356] UDP-Lite hash table entries: 128 (order: 1, 12288 bytes)
  89. [ 3.629608] NET: Registered protocol family 1
  90. [ 3.756072] VFS: Disk quotas dquot_6.5.2
  91. [ 3.756286] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  92. [ 3.757720] msgmni has been set to 486
  93. [ 3.768249] alg: No test for stdrng (krng)
  94. [ 3.768798] io scheduler noop registered
  95. [ 3.769042] io scheduler cfq registered (default)
  96. [ 3.834381] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  97. [ 3.865997] serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
  98. [ 3.889282] serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
  99. [ 3.912170] serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
  100. [ 4.487884] console [ttyS2] enabled
  101. [ 4.535003] brd: module loaded
  102. [ 4.558807] loop: module loaded
  103. [ 4.563842] mtdoops: mtd device (mtddev=name/number) must be supplied
  104. [ 4.570770] OneNAND driver initializing
  105. [ 4.575653] omap2-onenand omap2-onenand: initializing on CS0, phys base 0x04000000, virtual base d0880000
  106. [ 4.585449] Muxed OneNAND 256MB 1.8V 16-bit (0x40)
  107. [ 4.590362] OneNAND version = 0x0121
  108. [ 4.595733] Scanning device for bad blocks
  109. [ 4.809173] onenand_bbt_wait: ecc error = 0x2222, controller error 0x2400
  110. [ 4.816131] Bad eraseblock 1870 at 0x0e9c0000
  111. [ 4.840362] Creating 6 MTD partitions on "omap2-onenand":
  112. [ 4.845886] 0x000000000000-0x000000020000 : "bootloader"
  113. [ 4.858856] 0x000000020000-0x000000080000 : "config"
  114. [ 4.868133] 0x000000080000-0x0000000c0000 : "log"
  115. [ 4.877197] 0x0000000c0000-0x0000002c0000 : "kernel"
  116. [ 4.886779] 0x0000002c0000-0x0000004c0000 : "initfs"
  117. [ 4.896118] 0x0000004c0000-0x000010000000 : "rootfs"
  118. [ 4.938934] usbcore: registered new interface driver libusual
  119. [ 4.945037] i2c /dev entries driver
  120. [ 4.958465] ALSA device list:
  121. [ 4.961517] No soundcards found.
  122. [ 4.965759] TCP cubic registered
  123. [ 4.969055] NET: Registered protocol family 17
  124. [ 4.974060] NET: Registered protocol family 15
  125. [ 4.994873] Power Management for TI OMAP3.
  126. [ 5.068542] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
  127. [ 5.084106] regulator_init_complete: incomplete constraints, leaving V28 on
  128. [ 5.091796] regulator_init_complete: incomplete constraints, leaving VCSI on
  129. [ 5.099426] regulator_init_complete: incomplete constraints, leaving VMMC1 on
  130. [ 17.722717] Waiting 5sec before mounting root device...
  131. [ 22.733947] VFS: Cannot open root device "nfs" or unknown-block(0,255)
  132. [ 22.740692] Please append a correct "root=" boot option; here are the available partitions:
  133. [ 22.749359] 1f00 128 mtdblock0 (driver?)
  134. [ 22.754516] 1f01 384 mtdblock1 (driver?)
  135. [ 22.759582] 1f02 256 mtdblock2 (driver?)
  136. [ 22.764709] 1f03 2048 mtdblock3 (driver?)
  137. [ 22.769805] 1f04 2048 mtdblock4 (driver?)
  138. [ 22.774871] 1f05 257280 mtdblock5 (driver?)
  139. [ 22.779998] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,255)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!