API tools faq
paste
Advertisement
Astralix

Untitled

Astralix
Jan 8th, 2012
396
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 22.78 KB | None | 0 0
raw download clone embed print report
  1. In
  2. cap=512MB
  3. OUT
  4. BUILD[0006]=====374723
  5. GetRemapTbl flag = 0
  6. OK!
  7. Boot ver: 2011-04-22#1.61
  8. Unknow param: FIRMWARE_VER:0.2.3!
  9. Unknow param: MACHINE_MODEL:Odys-Loox!
  10. Unknow param: MACHINE_ID:007!
  11. Unknow param: MANUFACTURER:RK29SDK!
  12. ORG CMDLINE: console=ttyS1,115200n8n androidboot.console=ttyS1 init=/init initrd=0x62000000,0x500000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x00004000@0x00004000(kernel),0x00002000@0x00008000(boot),0x00004000@0x0000A000(recovery),0x00080000@0x0000E000(system),0x00082000@0x0008E000(backup),0x0003a000@0x00110000(cache),0x00100000@0x0014a000(userdata),0x00002000@0x0024a000(kpanic),-@0x0024c000(user)
  13. get command in misc
  14. no command
  15. Normal boot
  16. Loading boot ...
  17. Check image...
  18. Check OK!
  19. Load ok!
  20. Loading kernel ...
  21. Check image...
  22. Check OK!
  23. Load ok!
  24. END ===== 384662
  25. CMDLINE: console=ttyS1,115200n8n androidboot.console=ttyS1 init=/init initrd=0x62000000,0x140000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x00004000@0x00004000(kernel),0x00002000@0x00008000(boot),0x00004000@0x0000A000(recovery),0x00080000@0x0000E000(system),0x00082000@0x0008E000(backup),0x0003a000@0x00110000(cache),0x00100000@0x0014a000(userdata),0x00002000@0x0024a000(kpanic),-@0x0024c000(user) bootver=2011-04-22#1.61 firmware_ver=
  26. Starting kernel...@0x60408000
  27.  
  28. [ 0.000000] Initializing cgroup subsys cpu
  29. [ 0.000000] Linux version 2.6.32.27 (root@rkfae-ty) (gcc version 4.4.0 (GCC) ) #90 PREEMPT Thu Nov 24 10:13:48 CST 2011
  30. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
  31. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  32. [ 0.000000] Machine: RK29board
  33. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  34. [ 0.000000] bootconsole [earlycon0] enabled
  35. [ 0.000000] CPU SRAM: copied sram code from c0937000 to ff400000 - ff401b40
  36. [ 0.000000] CPU SRAM: copied sram data from c0938b40 to ff402000 - ff4021c8
  37. [ 0.000000] Clocking rate (apll/dpll/cpll/gpll/core/aclk_cpu/hclk_cpu/pclk_cpu/aclk_periph/hclk_periph/pclk_periph): 300/402/552/288/300/150/75/37/144/144/36 MHz
  38. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 92202
  39. [ 0.000000] Kernel command line: console=ttyS1,115200n8n androidboot.console=ttyS1 init=/init initrd=0x62000000,0x140000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x00004000@0x00004000(kernel),0x00002000@0x00008000(boot),0x00004000@0x0000A000(recovery),0x00080000@0x0000E000(system),0x00082000@0x0008E000(backup),0x0003a000@0x00110000(cache),0x00100000@0x0014a000(userdata),0x00002000@0x0024a000(kpanic),-@0x0024c000(user) bootver=2011-04-22#1.61 firmware_ver=
  40. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  41. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  42. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  43. [ 0.000000] Memory: 363MB = 363MB total
  44. [ 0.000000] Memory: 352512KB available (4272K code, 9290K data, 592K init, 0K highmem)
  45. [ 0.000000] Hierarchical RCU implementation.
  46. [ 0.000000] NR_IRQS:324
  47. [ 0.000000] rk29_gpio_irq_setup: 324 gpio irqs in 7 banks
  48. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  49. [ 0.000000] Console: colour dummy device 80x30
  50. [ 0.005371] Calibrating delay loop... 299.00 BogoMIPS (lpj=1495040)
  51. [ 0.225275] Mount-cache hash table entries: 512
  52. [ 0.231089] Initializing cgroup subsys debug
  53. [ 0.235924] Initializing cgroup subsys cpuacct
  54. [ 0.240908] Initializing cgroup subsys freezer
  55. [ 0.245936] CPU: Testing write buffer coherency: ok
  56. [ 0.252456] devtmpfs: initialized
  57. [ 0.265907] regulator: core version 0.5
  58. [ 0.270509] NET: Registered protocol family 16
  59. [ 0.275589] DDR DEBUG: version 1.01 20110422
  60. [ 0.280482] DDR DEBUG: DDR3 Device
  61. [ 0.284346] DDR DEBUG: 1 CS, ROW=14, Bank=8, COL=10, Total Capability=512MB
  62. [ 0.302068] DDR DEBUG: init success!!! freq=456MHz
  63. [ 0.307451] DDR DEBUG: CSR:0x0, RSLR0:0x249, RSLR1:0x0, RDGR0:0x55, RDGR1:0xff
  64. [ 0.319051] rk29sdk_wifi_bt_gpio_control_init: init finished
  65. [ 0.326076] rk29_serial: detected port 1
  66. [ 0.330581] rk29_serial.1: ttyS1 at MMIO 0x20060000 (irq = 67) is a RK29_SERIAL
  67. [ 0.338767] rk29_serial: console setup on port 1
  68. [ 0.343977] rk29_serial_set_termios:fcr=0xa1,irq=67
  69. [ 0.349440] console [ttyS1] enabled, bootconsole disabled
  70. 0.349440] console [ttyS1] enabled, bootconsole disabled
  71. [ 0.361030] rk29_serial: detected port 0
  72. [ 0.362184] rk29_serial.0: ttyS0 at MMIO 0x20030000 (irq = 66) is a RK29_SERIAL
  73. [ 0.369574] rk29_serial: detected port 2
  74. [ 0.373363] rk29_serial.2: ttyS2 at MMIO 0x20064000 (irq = 68) is a RK29_SERIAL
  75. [ 0.380815] rk29_serial: driver initialized
  76. [ 0.417357] bio: create slab <bio-0> at 0
  77. [ 0.419307] regulator: pwm-regulator: 950 <--> 1400 mV
  78. [ 0.423811] pwm_regulator: driver initialized
  79. [ 0.429140] SCSI subsystem initialized
  80. [ 0.431810] usb_init, usbcore,everest
  81. [ 0.435765] usbcore: registered new interface driver usbfs
  82. [ 0.441035] usbcore: registered new interface driver hub
  83. [ 0.446408] usbcore: registered new device driver usb
  84. [ 0.452088] rk29_i2c rk29_i2c.0: i2c-0: RK29 I2C adapter
  85. [ 0.456752] rk29_i2c rk29_i2c.1: i2c-1: RK29 I2C adapter
  86. [ 0.462259] rk29_i2c rk29_i2c.2: i2c-2: RK29 I2C adapter
  87. [ 0.467337] rk29_i2c rk29_i2c.3: i2c-3: RK29 I2C adapter
  88. [ 0.472581] rk29-adc rk29-adc: rk29 adc: driver initialized
  89. [ 0.479446] Switching to clocksource timer3
  90. [ 0.674105] rk29fb_probe ok
  91. [ 0.676358] NET: Registered protocol family 2
  92. [ 0.678777] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  93. [ 0.686344] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  94. [ 0.693339] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  95. [ 0.699503] TCP: Hash tables configured (established 16384 bind 16384)
  96. [ 0.705641] TCP reno registered
  97. [ 0.709045] NET: Registered protocol family 1
  98. [ 0.713475] Unpacking initramfs...
  99. [ 0.916908] Freeing initrd memory: 1280K
  100. [ 0.918650] Loaded driver for PL330 DMAC-0 rk29-pl330
  101. [ 0.923106] DBUFF-32x8bytes Num_Chans-6 Num_Peri-8 Num_Events-3
  102. [ 0.929288] Loaded driver for PL330 DMAC-1 rk29-pl330
  103. [ 0.934072] DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-4
  104. [ 0.984936] VPU: HW ID = 0x67311148
  105. [ 0.985571] VPU: Compatible HW found at 0x10104200
  106. [ 0.990344] VPU: HW ID = 0x82701110
  107. [ 0.993837] VPU: Compatible HW found at 0x10104000
  108. [ 1.019048] VPU: init success
  109. [ 1.021983] vpu_mem: 61 initialized
  110. [ 1.034469] ashmem: initialized
  111. [ 1.035931] fuse init (API version 7.13)
  112. [ 1.038967] yaffs Nov 22 2011 15:25:06 Installing.
  113. [ 1.045911] alg: No test for stdrng (krng)
  114. [ 1.047652] io scheduler noop registered
  115. [ 1.051645] io scheduler cfq registered (default)
  116. [ 1.070007] loop: module loaded
  117. [ 1.070387] pmem_cam: 1 init
  118. [ 1.075167] pmem: 1 init
  119. [ 1.077320] Android kernel panic handler initialized (bind=kpanic)
  120. [ 1.095176] PPP generic driver version 2.4.2
  121. [ 1.096718] PPP Deflate Compression module registered
  122. [ 1.101609] PPP BSD Compression module registered
  123. [ 1.106981] PPP MPPE Compression module registered
  124. [ 1.111057] NET: Registered protocol family 24
  125. [ 1.115539] PPPoL2TP kernel driver, V1.0
  126. [ 1.119435] usbcore: registered new interface driver asix
  127. [ 1.124798] usbcore: registered new interface driver dm9620
  128. [ 1.130326] usbcore: registered new interface driver SR9700_android
  129. [ 1.136568] Initializing USB Mass Storage driver...
  130. [ 1.141440] usbcore: registered new interface driver usb-storage
  131. [ 1.147385] USB Mass Storage support registered.
  132. [ 1.152074] usbcore: registered new interface driver usbserial
  133. [ 1.157820] USB Serial support registered for generic
  134. [ 1.162854] usbcore: registered new interface driver usbserial_generic
  135. [ 1.169294] usbserial: USB Serial Driver core
  136. [ 1.173674] USB Serial support registered for GSM modem (1-port)
  137. [ 1.179650] usbcore: registered new interface driver option
  138. [ 1.185168] option: v0.7.2:USB Driver for GSM modems
  139. [ 1.190128] DWC_OTG: dwc_otg_driver_probe,everest
  140. [ 1.194846] DWC_OTG: dwc_otg_driver_probe otg2.0 reg addr: 0x10180000 remap:0xd7080000
  141. [ 1.402318] DWC_OTG: ^^^^^^^^^^^^^^^^^Device Mode
  142. [ 1.404157] DWC_OTG: dwc_otg_pcd_init,everest
  143. [ 1.408543] DWC_OTG: dwc_otg_driver_probe end, everest
  144. [ 1.413731] DWC_OTG: host11_driver_probe host1.1 reg addr: 0x10140000 remap:0xd7100000
  145. [ 1.621125] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
  146. [ 1.622888] DWC_OTG: host11_hcd_init everest
  147. [ 1.627131] usb11_host usb11_host: DWC OTG Controller
  148. [ 1.632179] usb11_host usb11_host: new USB bus registered, assigned bus number 1
  149. [ 1.639539] usb11_host usb11_host: irq 50, io mem 0x00000000
  150. [ 1.645162] DWC_OTG: dwc_otg_hcd_start! everest
  151. [ 1.649671] DWC_OTG: Init: Port Power? op_state=1
  152. [ 1.654336] DWC_OTG: Init: Power Port (0)
  153. [ 1.658400] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  154. [ 1.665099] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  155. [ 1.672290] usb usb1: Product: DWC OTG Controller
  156. [ 1.676957] usb usb1: Manufacturer: Linux 2.6.32.27 host11_hcd
  157. [ 1.682775] usb usb1: SerialNumber: usb11_host
  158. [ 1.687415] usb usb1: configuration #1 chosen from 1 choice
  159. [ 1.692857] hub 1-0:1.0: USB hub found
  160. [ 1.696520] hub 1-0:1.0: 1 port detected
  161. [ 1.700550] DWC_OTG: host11_hcd_init end,everest
  162. [ 1.704968] DWC_OTG: host11_driver_probe end, everest
  163. [ 1.710083] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xd7180000
  164. [ 1.917538] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
  165. [ 1.919291] DWC_OTG: host20_hcd_init everest
  166. [ 1.923553] usb20_host usb20_host: DWC OTG Controller
  167. [ 1.928578] usb20_host usb20_host: new USB bus registered, assigned bus number 2
  168. [ 1.935964] usb20_host usb20_host: irq 49, io mem 0x00000000
  169. [ 1.941562] DWC_OTG: dwc_otg_hcd_start! everest
  170. [ 1.946079] DWC_OTG: Init: Port Power? op_state=1
  171. [ 1.950749] DWC_OTG: Init: Power Port (0)
  172. [ 1.954792] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  173. [ 1.961498] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  174. [ 1.968705] usb usb2: Product: DWC OTG Controller
  175. [ 1.973381] usb usb2: Manufacturer: Linux 2.6.32.27 host20_hcd
  176. [ 1.979178] usb usb2: SerialNumber: usb20_host
  177. [ 1.983812] usb usb2: configuration #1 chosen from 1 choice
  178. [ 1.989235] hub 2-0:1.0: USB hub found
  179. [ 1.992931] hub 2-0:1.0: 1 port detected
  180. [ 1.996953] DWC_OTG: host20_hcd_init end,everest
  181. [ 2.001363] DWC_OTG: host20_driver_probe end, everest
  182. [ 2.006439] android init
  183. [ 2.008937] android_probe pdata: c08ed984
  184. [ 2.012938] android_bind
  185. [ 2.015404] usb_add_config, add and bind,everest
  186. [ 2.019998] android_bind_config
  187. [ 2.023212] android_usb <NULL>: android_usb ready
  188. [ 2.027829] f_adb init
  189. [ 2.030137] android_register_function adb
  190. [ 2.034140] f_mass_storage init
  191. [ 2.037243] android_register_function usb_mass_storage
  192. [ 2.042368] mass_storage_bind_config
  193. [ 2.045988] fsg_probe pdata: c08ed2f0
  194. [ 2.050013] android_usb <NULL>: Number of LUNs=2
  195. [ 2.054190] adb_bind_config
  196. [ 2.057466] input: rk29-keypad as /devices/platform/rk29-keypad/input/input0
  197. [ 2.064129] lz300msf_init
  198. [ 2.066563] ---lz300msf start probe---
  199. [ 2.070411] input: lz300msf Touchscreen as /devices/virtual/input/input1
  200. [ 2.077042] threshold value:(0, 0)
  201. [ 2.090559] ( 50, 50) => ( 50, 51)
  202. [ 2.091617] ( 750, 50) => ( 750, 49)
  203. [ 2.095538] ( 50, 550) => ( 50, 549)
  204. [ 2.099417] ( 750, 550) => ( 750, 551)
  205. [ 2.103334] v_CalcParam.a1=24142
  206. [ 2.103338] v_CalcParam.b1=39
  207. [ 2.103341] v_CalcParam.c1= -2416677
  208. [ 2.103344] v_CalcParam.a2 = 31
  209. [ 2.103348] v_CalcParam.b2 = -17325
  210. [ 2.103351] v_CalcParam.c2 = 69376681
  211. [ 2.103355] v_CalcParam.delta = 115314
  212. [ 2.127946] tp_calib_iface_init---335,3661,3679,3683,341,349,3684,339,2183,2087
  213. [ 2.135220] Auto set calibration successfully.
  214. [ 2.140196]
  215. [ 2.140200] <<<<<<<<<<<<<<<<<lz300 wakeup >>>>>>>>>>>>>
  216. [ 2.146320] ---lz300msf end probe---
  217. [ 2.150229] mma8452 devid:2a
  218. [ 2.153219] input: gsensor as /devices/platform/rk29_i2c.0/i2c-0/0-001c/input/input2
  219. [ 2.160618] mma8452 probe ok
  220. [ 2.163731] using rtc device, rtc_hym8563, for alarms
  221. [ 2.168160] rtc_hym8563 0-0051: rtc core: registered rtc_hym8563 as rtc0
  222. [ 2.181973] Linux video capture interface: v2.00
  223. [ 2.289609] rk2918_low_battery_check: gBatVoltage = 3800, gBatCapacity = 41
  224. [ 2.293760] rk2918_battery: driver initialized
  225. [ 2.298331] device-mapper: uevent: version 1.0.3
  226. [ 2.302955] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
  227. [ 2.311439] rk29_sdmmc_change_clk_div..1438.. newDiv=80, newCLK=300Khz====xbw[sd_mmc]=====
  228. [ 2.324571] ..Line2907..The End of the SDMMC probe Ver.1.14. The last modify date is 2011-06-26,modifyed by XBW. ===xbw[sd_mmc]===
  229. [ 2.324580]
  230. [ 2.335062]
  231. [ 2.335065] drivers/mmc/core/core.c...1105.. ===== mmc_rescan Begin....======xbw[mmc0]=====
  232. [ 2.349972] usbcore: registered new interface driver usbhid
  233. [ 2.352701] usbhid: v2.6:USB HID core driver
  234. [ 2.357182] logger: created 64K log 'log_main'
  235. [ 2.361418] logger: created 256K log 'log_events'
  236. [ 2.366127] logger: created 64K log 'log_radio'
  237. [ 2.370606] logger: created 64K log 'log_system'
  238. [ 2.375203] gpu_probe: No gpu clk supplied, use default!
  239. [ 2.380446] ---- gpu regbase: 0xd7060000 ----
  240. [ 2.402102] DWC_OTG: ********vbus detect*********************************************
  241. [ 2.421305] Advanced Linux Sound Architecture Driver Version 1.0.21.
  242. [ 2.425009] No device for DAI RT5621
  243. [ 2.428356]
  244. [ 2.428359] ******************
  245. [ 2.428362] rk29_sdmmc_interrupt:INT_CD=0x1,INT-En=1,hostState=0, present Old=0 ==> New=1 ==xbw[sd_mmc]==
  246. [ 2.442804] RT5621 Audio Codec alsa 1.0.21 0.05
  247. [ 2.447014] alsa version is 1.0.21, codec driver version is 0.04
  248. [ 2.453465] asoc: RT5621 <-> rk29_i2s mapping ok
  249. [ 2.461807]
  250. [ 2.461810] mmc_rescan..1160.. ===== Begin to identify card as SD-card ===xbw[mmc0]===
  251. [ 2.522601] rk29_sdmmc_change_clk_div..1438.. newDiv=0, newCLK=48000Khz====xbw[sd_mmc]=====
  252. [ 2.542115] mmc0: new high speed SDHC card at address e624
  253. [ 2.544940] mmc_blk_alloc..593 **** devidx=0, dev_use[0]=1, disk_name=mmcblk0 *** ==xbw[mmc0]==
  254. [ 2.562109] mmcblk0: mmc0:e624 SU08G 7.40 GiB
  255. [ 2.563848] mmcblk0: detected capacity change from 0 to 7948206080
  256. [ 2.569844] mmcblk0:
  257. [ 2.582112] msdos_partition..445... ==== Begin to parse sdcard-partition. ====xbw[mmc0]===
  258. [ 2.587766] msdos_partition..513... ==== The sdcard has MBR. ====xbw[mmc0]===
  259. [ 2.594887] msdos_partition..524... ==== partition-1, size=7760896KB ====xbw[mmc0]===
  260. [ 2.602770] msdos_partition..549... ==== main partition-1....====xbw[mmc0]===
  261. [ 2.609866] p1
  262. [ 2.639918] DWC_OTG: ********soft connect!!!*****************************************
  263. [ 2.645163] mmc_rescan..1171.. ===== Initialize SD-card successfully. ===xbw[mmc0]===
  264. [ 2.652783] DWC_OTG: USB SUSPEND
  265. [ 2.799281] DWC_OTG: USB RESET
  266. [ 2.803078] ALSA device list:
  267. [ 2.803183] #0: RK29_RT5621 (RT5621)
  268. [ 2.807046] TCP cubic registered
  269. [ 2.810306] NET: Registered protocol family 10
  270. [ 2.815039] IPv6 over IPv4 tunneling driver
  271. [ 2.819023] NET: Registered protocol family 17
  272. [ 2.823153]
  273. [ 2.823157] sensor_mod_init..ov7675..
  274. [ 2.828362] rk29xx_camera: rk29_camera_init..drivers/media/video/rk29_camera_oneframe.c..1678
  275. [ 2.837048] rk29xx_camera: rk29_camera_probe..drivers/media/video/rk29_camera_oneframe.c..1464
  276. [ 2.845834] rk29xx_camera:
  277. [ 2.845837] rk29_camera_probe Memory(start:0x77900000 size:0x400000) for IPP obtain
  278. [ 2.869047] rk29xx-camera rk29xx-camera.33: Non-NULL drvdata on register
  279. [ 2.872964] camera 33-0: Probing 33-0
  280. [ 2.876529] camera 33-0: RK29 Camera driver attached to camera0(ov7675)
  281. [ 2.883125] rk29xx_camera: rk29_camera_activate..620..
  282. [ 2.888742]
  283. [ 2.888745] sensor_probe..drivers/media/video/ov7675.c..2363..
  284. [ 2.909906] android_usb <NULL>: high speed config #1: android
  285. [ 2.949470]
  286. [ 2.949474] ov7675 pid = 0x76
  287. [ 2.951226]
  288. [ 2.951228] sensor_probe..drivers/media/video/ov7675.c..2403 ret = 0
  289. [ 2.959391] camera 33-0: RK29 Camera driver detached from camera0(ov7675)
  290. [ 2.965979]
  291. [ 2.965982] ov7675..sensor_ioctl..cmd:1
  292. [ 2.971330]
  293. [ 2.971333] ov7675..sensor_deactivate..
  294. [ 2.976732] rk29xx_camera: rk29_camera_remove_device exit
  295. [ 2.982086] rk29xx_camera: rk29_camera_probe..drivers/media/video/rk29_camera_oneframe.c..1580
  296. [ 2.990959] ipp irq 46
  297. [ 2.993371] ThumbEE CPU extension supported.
  298. [ 2.997449] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  299. [ 3.005538] RK29 Backlight Driver Initialized.
  300. [ 3.009548] set_msc_connect_flag status = 1 20101216
  301. [ 3.018412] rtc_hym8563 0-0051: setting system clock to 2012-01-08 13:52:46 UTC (1326030766)
  302. [ 3.0241[ 3.027798] rk29_serial_set_termios:fcr=0xa1,irq=67
  303. [ 3.075355] rk29_serial_set_termios:fcr=0xa1,irq=67
  304. [ 3.084017] >>>>>> win1fb_check_var fail 2!!!
  305. [ 3.084029] >>>>>> (0+800)>800 || (1+600)>600 || (0+800)>800 || (0+600)>600
  306. [ 3.097297] rk29xxnand_ko: module license '' taints kernel.
  307. [ 3.100025] Disabling lock debugging due to kernel taint
  308. [ 3.110618] gp_rknand_info = : 0xd64f0740
  309. [ 3.111841] ATime: 50 ns AHB: 210 timming: 10e3
  310. [ 3.116328] Flash 0 ID: ad d7 94 9a 74
  311. [ 3.120485] ATime: 42 ns AHB: 144 timming: 1082
  312. [ 3.138466] GetRemapTbl...done
  313. [ 5.108604] FTL INFO:Version = 428,Date = 20110708
  314. [ 5.111006] totalLogicBlkRaw = 1904
  315. [ 5.114809] 10 cmdlinepart partitions found on MTD device rk29xxnand
  316. [ 5.120886] Creating 10 MTD partitions on "rk29xxnand":
  317. [ 5.126142] 0x000000400000-0x000000800000 : "misc"
  318. [ 5.131818] 0x000000800000-0x000001000000 : "kernel"
  319. [ 5.136438] 0x000001000000-0x000001400000 : "boot"
  320. [ 5.141170] 0x000001400000-0x000001c00000 : "recovery"
  321. [ 5.146328] 0x000001c00000-0x000011c00000 : "system"
  322. [ 5.151827] 0x000011c00000-0x000022000000 : "backup"
  323. [ 5.156821] 0x000022000000-0x000029400000 : "cache"
  324. [ 5.161286] 0x000029400000-0x000049400000 : "userdata"
  325. [ 5.167432] 0x000049400000-0x000049800000 : "kpanic"
  326. [ 5.171406] apanic: Bound to mtd partition 'kpanic'
  327. [ 5.175334] apanic: No panic data available
  328. [ 5.179477] 0x000049800000-0x0000ee000000 : "user"
  329. [ 5.191336] startBlk = 288
  330. [ 5.191358] sysProtAddr = 287
  331. [ 5.196074] init: ext_check(/dev/block/mtdblock7):
  332. [ 5.199105] init: ext_check(/dev/block/mtdblock7): /system/bin/e2fsck not found (skipping checks)
  333. [ 5.908512] EXT3 FS on mtdblock7, internal journal
  334. [ 5.910460] EXT3-fs: recovery complete.
  335. [ 5.914307] kjournald starting. Commit interval 5 seconds
  336. [ 5.919778] EXT3-fs: mounted filesystem with ordered data mode.
  337. [ 5.932191] init: ext_check(/dev/block/mtdblock6):
  338. [ 6.192202] init: e2fsck 1.41.14 (22-Dec-2010)
  339. [ 6.193799] init: superblock offset = 0
  340. [ 6.212168] init: /dev/block/mtdblock6: recovering journal
  341. [ 6.302152] init: superblock offset = 0
  342. [ 6.422497] init: /dev/block/mtdblock6: clean, 19/29760 files, 50032/118784 blocks
  343. [ 6.427253] init: /system/bin/e2fsck terminated by exit(0)
  344. [ 6.432711] init: filesystem '/dev/block/mtdblock6' had no errors
  345. [ 6.518335] EXT3 FS on mtdblock6, internal journal
  346. [ 6.520269] EXT3-fs: mounted filesystem with ordered data mode.
  347. [ 6.526185] kjournald starting. Commit interval 5 seconds
  348. [ 6.761667] rk29_serial_set_termios:fcr=0xa1,irq=67
  349. [ 6.764886] enabling adb
  350. [ 6.787254] adb_open
  351. [ 6.788182] DWC_OTG: USB SUSPEND
  352. [ 6.983611] DWC_OTG: USB RESET
  353. [ 7.091883] set_msc_connect_flag status = 0 20101216
  354. [ 7.094027] android_usb <NULL>: high speed config #1: android
  355. [ 7.099768] set_msc_connect_flag status = 1 20101216
  356. [ 7.104754] adb_release
  357. [ 7.107385] adb_open
  358. # [ 7.303097] .323.. MMC0 receive the message No-Media from VOLD.====xbw[sd_mmc]====
  359. [ 12.865171] warning: `zygote' uses 32-bit capabilities (legacy support in use)
  360. [ 13.488544] gpu: change freq to 552, got 552
  361. [ 18.268325] =======================================================
  362. [ 18.268338] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
  363. [ 18.268344] =======================================================
  364. [ 18.268352] RTL8192/RTL8188 USB WiFi driver (Powered by Rockchip,Ver 3.23) init.
  365. [ 18.268397] Request GPIO for WIFI POWER error!
  366. [ 18.606106] request_suspend_state: wakeup (3->0) at 18613996129 (2012-01-08 13:53:02.087681605 UTC)
  367. [ 18.792214] usb 1-1: new full speed USB device using usb11_host and address 2
  368. [ 18.792240] DWC_OTG: dwc_otg_hcd_qh_init tt->hub null!
  369. [ 19.192210] DWC_OTG: dwc_otg_hcd_qh_init tt->hub null!
  370. [ 19.196627] usb 1-1: not running at top speed; connect to a high speed hub
  371. [ 19.231739] usb 1-1: New USB device found, idVendor=0bda, idProduct=817a
  372. [ 19.231755] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  373. [ 19.231764] usb 1-1: Product: 802.11n WLAN Adapter
  374. [ 19.231770] usb 1-1: Manufacturer: Realtek
  375. [ 19.231776] usb 1-1: SerialNumber: 00e04c000001
  376. [ 19.232275] usb 1-1: configuration #1 chosen from 1 choice
  377. [ 19.346131] mma8452_start::enter
  378. [ 20.544444] usbcore: registered new interface driver rtl8192cu
  379. [ 22.019909] +871x_drv - dev_open
  380. [ 22.408427] hj---->open file /data/bat_last_capacity.dat failed
  381. [ 22.411495] truecapacity = 38
  382. [ 24.249573] MAC Address = 00:02:72:aa:b3:85
  383. [ 24.287576] DWC_OTG: dwc_otg_hcd_qh_init tt->hub null!
  384. [ 24.290076] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  385. [ 25.466663] DWC_OTG: dwc_otg_hcd_qh_init tt->hub null!
  386. [ 27.570558] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  387. [ 27.602589] DWC_OTG: dwc_otg_hcd_qh_init tt->hub null!
  388. [ 29.199605] gpu: change freq to 300, got 276
  389. [ 33.134480] SN=0 uncali_x=400 uncali_y=3594
  390. [ 33.135807] SN=1 uncali_x=3639 uncali_y=3619
  391. [ 33.161182] SN=2 uncali_x=364 uncali_y=339
  392. [ 33.162456] SN=3 uncali_x=3660 uncali_y=324
  393. [ 33.166583] SN=4 uncali_x=1992 uncali_y=2230
  394. [ 33.170827] SN=5 uncali_x=2929 uncali_y=2303
  395. [ 33.188137] ( 50, 50) => ( 53, 52)
  396. [ 33.189204] ( 750, 50) => ( 747, 48)
  397. [ 33.201343] ( 50, 550) => ( 47, 548)
  398. [ 33.203099] ( 750, 550) => ( 753, 552)
  399. [ 33.206313] v_CalcParam.a1=22848
  400. [ 33.206317] v_CalcParam.b1=-52
  401. [ 33.206320] v_CalcParam.c1= -3238333
  402. [ 33.206324] v_CalcParam.a2 = 24
  403. [ 33.206327] v_CalcParam.b2 = -16284
  404. [ 33.206331] v_CalcParam.c2 = 64064716
  405. [ 33.206334] v_CalcParam.delta = 106659
  406. [ 33.312031] touch_cali_status-0--400,3594,3639,3619,364,339,3660,324,1992,2230
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!