API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jun 17th, 2019
96
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 135.99 KB | None | 0 0
raw download clone embed print report
  1. [2019-06-05 10:10:12] [Output] : ★ Alex Harold makes his way into the Subaru,opening the front left door.
  2. [2019-06-05 10:10:13] [Output] : * Alex Harold presses on the key to unlock the vehicle. ((2019 Subaru WRX STI)) *
  3. [2019-06-05 10:10:39] [Output] : ★ Alex Harold then pulls up the hood release cable located near the brake pedal poping up the hood.
  4. [2019-06-05 10:11:09] [Output] : ★ With the hood in the rear now released Alex makes his way to the back of the car ((Alex Harold))
  5. [2019-06-05 10:11:11] [Output] : Vehicle spawn position set.
  6. [2019-06-05 10:11:53] [Output] : ★ Alex Harold inserts his hands under the hood and searches for the release trigger.
  7. [2019-06-05 10:12:19] [Output] : ★ Alex Harold pops the trigger and lifts the hood up,letting it sit on the hydraulic arms.
  8. [2019-06-05 10:12:33] [Output] : ★ The fully engine of the car would now be exposed. ((Alex Harold))
  9. [2019-06-05 10:12:43] [Output] : ★ There would be a bunch of tools near the first car lift. ((Alex Harold))
  10. [2019-06-05 10:13:01] [Output] : ★ Alex Harold makes his way to the tools in order to pick up his impact gun and pliers.
  11. [2019-06-05 10:13:31] [Output] : ★ Alex Harold leans over the tools and picks up the impact gun and his pliers,returning to the car's back
  12. [2019-06-05 10:16:25] [Output] : ★ The intake would be sitting on the top of the engine with the four throtles attached. ((Alex Harold))
  13. [2019-06-05 10:16:55] [Output] : ★ There would also be four hoses attached to each throtle,heading into the two air filters. ((Alex Harold))
  14. [2019-06-05 10:19:08] [Output] : ★ Alex Harold grabs up his pliers and starts untightening the clamps holding the four hoses.
  15. [2019-06-05 10:19:40] [Output] : ★ Alex Harold would then grab each hose's end and let it sit on top of the engine letting the throtles fre
  16. [2019-06-05 10:19:42] [Output] : Alex Harold: (( free* ))
  17. [2019-06-05 10:20:12] [Output] : ★ The two air filter of the engine would be installed on both sides on the rear fender's walls ((Alex Harold))
  18. [2019-06-05 10:20:42] [Output] : ★ Alex Harold uses his pliers again and disconnects the clamp holding the left hose from the left air...
  19. [2019-06-05 10:20:48] [Output] : ★ Alex Harold ...filter.
  20. [2019-06-05 10:21:01] [Output] : ★ Alex Harold then grabs the hose out and places it down on the ground.
  21. [2019-06-05 10:21:20] [Output] : ★ Alex Harold would then use the pliers again and repeat the process to get the right hose out as well.
  22. [2019-06-05 10:21:33] [Output] : ★ Alex Harold then drags out the hose and puts it on the ground near the other one.
  23. [2019-06-05 10:22:03] [Output] : ★ The air filter's housings would each have four bolts tightening the top cap. ((Alex Harold))
  24. [2019-06-05 10:22:29] [Output] : ★ Alex Harold starts up the impact gun and makes his way to the left air filter in order to get it out
  25. [2019-06-05 10:22:51] [Output] : ★ Alex Harold unbolts the four bolts holding the cap in and then pockets them up,holding the cap with his.
  26. [2019-06-05 10:22:57] [Output] : ★ Alex Harold ...left hand
  27. [2019-06-05 10:23:13] [Output] : ★ Alex Harold then takes the cap out and places it on the ground near the two hoses.
  28. [2019-06-05 10:23:42] [Output] : ★ As the cap is dettached,the air filter would be exposed. ((Alex Harold))
  29. [2019-06-05 10:23:57] [Output] : ★ Alex Harold drags the old air filter out and throws it away on the ground.
  30. [2019-06-05 10:24:22] [Output] : ★ The bottom cap of the air filter's housing would be held to the chasis with two clamps ((Alex Harold))
  31. [2019-06-05 10:24:56] [Output] : ★ Alex Harold grabs his pliers and unbolts the two claps holding the cap in.
  32. [2019-06-05 10:25:21] [Output] : ★ Alex Harold then drags the cap out and places it on the ground.
  33. [2019-06-05 10:25:35] [Output] : ★ Alex Harold would then start up the impact gun and make his way to the right air filter.
  34. [2019-06-05 10:25:54] [Output] : ★ Alex Harold disconnects the four bolts in a row and pockets them up,holding the cap with his left hand
  35. [2019-06-05 10:26:18] [Output] : ★ Alex Harold then slides the cap out and positions it on the ground near the others.
  36. [2019-06-05 10:26:41] [Output] : ★ Alex Harold would then pick up the old right air filter and drag it out,throwing it near the other one
  37. [2019-06-05 10:27:19] [Output] : ★ Alex Harold then brings his pliers into the engine bay and uses it to disconnect the two clamps holding.
  38. [2019-06-05 10:27:31] [Output] : ★ Alex Harold ...the bottom cap to the chassis
  39. [2019-06-05 10:27:44] [Output] : ★ Alex Harold then grabs out the cap and throws it away on the ground near the other ones.
  40. [2019-06-05 10:28:07] [Output] : ★ On each throtle body you could see a throtle position sensor cable leading into them. ((Alex Harold))
  41. [2019-06-05 10:28:33] [Output] : ★ Alex Harold uses his left hand and then pulls out each wire letting the throtles dettached.
  42. [2019-06-05 10:29:50] [Output] : ★ Each throtle would be attached to the air intake housings with four bolts. ((Alex Harold))
  43. [2019-06-05 10:30:10] [Output] : ★ Alex Harold starts the impact gun up and heads to the first left throtle body.
  44. [2019-06-05 10:30:26] [Output] : ★ Alex Harold then dettaches each bolt and holds the throtle with his left hand.
  45. [2019-06-05 10:30:57] [Output] : ★ Alex Harold would then pocket up the four bolts and drag the throttle body out,repeating the process...
  46. [2019-06-05 10:31:04] [Output] : ★ Alex Harold ...for all the other three.
  47. [2019-06-05 10:31:26] [Output] : ★ Alex Harold then drags them all out and places them in a safe place near the suv on the left.
  48. [2019-06-05 10:31:44] [Output] : ★ Alex Harold returns to the car then in order to proceed further
  49. [2019-06-05 10:33:31] [Output] : ★ Under the air intake,there would be the two fuel rails leading the fuel into the engine. ((Alex Harold))
  50. [2019-06-05 10:33:48] [Output] : [English] Alex Harold says: Right,so I have to get the rails out to dettach the intake...
  51. [2019-06-05 10:34:10] [Output] : ★ Alex Harold inspects the fuel rails to check for any bolts holding them in.
  52. [2019-06-05 10:34:59] [Output] : ★ There would be two bolts at the end of each fuel line holding them in. ((Alex Harold))
  53. [2019-06-05 10:35:14] [Output] : ★ Alex Harold starts up the impact gun and proceeds to dettach the first fuel line bolts out.
  54. [2019-06-05 10:35:40] [Output] : ★ Alex Harold dettaches the first bolt and then pockets it heading to the rear one.
  55. [2019-06-05 10:36:02] [Output] : ★ The rear bolt would also hold in place the fuel line leading into the fuel rail. ((Alex Harold))
  56. [2019-06-05 10:36:17] [Output] : ★ Alex Harold dettaches the bolts easily and then pockets it leaving the fuel line free.
  57. [2019-06-05 10:36:33] [Output] : ★ Alex Harold then drags the fuel rail up and places it on the ground near the rest of parts.
  58. [2019-06-05 10:36:48] [Output] : ★ The six injectors on the left side would now be exposed. ((Alex Harold))
  59. [2019-06-05 10:37:05] [Output] : ★ In order to dettach the intake manifold,Alex would have to get each injector out. ((Alex Harold))
  60. [2019-06-05 10:37:35] [Output] : ★ Alex Harold makes his way to the first injector and twists it to the left
  61. [2019-06-05 10:38:00] [Output] : ★ A click would be heard and the injector would pop up by a few centimeters. ((Alex Harold))
  62. [2019-06-05 10:38:43] [Output] : ★ Alex Harold then repeats the process for each of the remaining five injectors,twisting them to the left.
  63. [2019-06-05 10:38:47] [Output] : ★ Alex Harold ...to pop
  64. [2019-06-05 10:39:46] [Output] : ★ Alex Harold then removes each injector from it's place and places them carefully on a safe place near...
  65. [2019-06-05 10:39:48] [Output] : ★ Alex Harold ...the suv
  66. [2019-06-05 10:40:01] [Output] : ★ Alex Harold then heads back to the right fuel rail in order to take it out.
  67. [2019-06-05 10:40:24] [Output] : ★ Alex Harold starts up the impact gun and dettaches the front bolt of the fuel rail.
  68. [2019-06-05 10:40:37] [Output] : ★ Alex Harold then pockets the bolt and mooves to the rear bolt.
  69. [2019-06-05 10:40:48] [Output] : ★ Again,the rear bolt would also hold the fuel line in place. ((Alex Harold))
  70. [2019-06-05 10:41:07] [Output] : ★ Alex Harold carefully disconnects the rear bolt and lets the fuel line free on the engine bay.
  71. [2019-06-05 10:41:21] [Output] : ★ You would notice a gasoline smell and some drips comming out of the two fuel lines. ((Alex Harold))
  72. [2019-06-05 10:41:28] [Output] : [English] Alex Harold says: Smells like victory to me!
  73. [2019-06-05 10:41:56] [Output] : ★ Alex Harold pulls the fuel rail up after and gets it out of the engine bay,placing it near the other one
  74. [2019-06-05 10:42:29] [Output] : ★ Alex Harold then twists all the injectors to the right in order to click them out of their place
  75. [2019-06-05 10:43:00] [Output] : ★ After six clicks,each injector would be poped out of it's place. ((Alex Harold))
  76. [2019-06-05 10:43:38] [Output] : ★ Alex Harold then picks up the six fuel injectors and carefully places them on the floor near the others
  77. [2019-06-05 10:43:54] [Output] : ★ In order to further dettach the rest of the parts,the engine cover would have to come out. ((Alex Harold))
  78. [2019-06-05 10:44:49] [Output] : ★ The engine cover would have eight bolts in total holding it over the rear shocks. ((Alex Harold))
  79. [2019-06-05 10:45:06] [Output] : ★ Alex Harold starts up the impact gun and dettaches all of the eight bolts in a row.
  80. [2019-06-05 10:45:21] [Output] : ★ Alex Harold then places the bolts in his rear pocket and mooves further to remove the cover
  81. [2019-06-05 10:45:40] [Output] : ★ As the engine cover is made out of carbon it is light enough to make Alex able to pick it ((Alex Harold))
  82. [2019-06-05 10:45:59] [Output] : ★ Alex Harold places his hands on each side of the engine cover and drags it out of place.
  83. [2019-06-05 10:46:15] [Output] : ★ Alex Harold then heads to the bunch of tools in order to let the cover sit in a safe place
  84. [2019-06-05 10:46:39] [Output] : ★ Alex Harold places the engine cover down and then mooves back to the car
  85. [2019-06-05 10:47:32] [Output] : ★ The air intake would now have twenty four bolts holding it to the engine block. ((Alex Harold))
  86. [2019-06-05 10:47:53] [Output] : ★ Alex Harold uses his wrench and starts dettaching the twelve bolts on the left side
  87. [2019-06-05 10:48:06] [Output] : ★ Alex Harold then removes the bolts and carefully pockets them up
  88. [2019-06-05 10:48:50] [Output] : ★ Alex Harold then makes his way to the right side of the manifold starting to remove the rest of twelve..
  89. [2019-06-05 10:48:53] [Output] : ★ Alex Harold ...bolts
  90. [2019-06-05 10:49:03] [Output] : ★ Alex Harold then pockets them up as well making the intake sit free.
  91. [2019-06-05 10:49:28] [Output] : ★ Alex Harold places his both hands on the sides of the manifold and lifts it out of place.
  92. [2019-06-05 10:49:40] [Output] : ★ Alex Harold then makes his way back near the engine cover
  93. [2019-06-05 10:50:08] [Output] : ★ Alex Harold leaves the intake manifold seat near the engine cover in order to store it in a safe place.
  94. [2019-06-05 10:50:29] [Output] : ★ Alex Harold then returns up to the car's engine to further dettach the parts.
  95. [2019-06-05 10:51:32] [Output] : ★ The twelve ignition coils placed on both sides of the engine would all have a wire leading ((Alex Harold))
  96. [2019-06-05 10:51:34] [Output] : ★ Alex Harold ...into them
  97. [2019-06-05 10:51:55] [Output] : ★ Alex Harold makes his way to the right side of the engine and starts pulling out the wires of the coils.
  98. [2019-06-05 10:51:59] [Output] : ★ Alex Harold ...one by one
  99. [2019-06-05 10:52:23] [Output] : ★ As the ignition coils on the right side are let free,Alex proceeds to the left side ((Alex Harold))
  100. [2019-06-05 10:52:48] [Output] : ★ Alex Harold then disconnects the six wires leading into the left side ignition coils and let them free..
  101. [2019-06-05 10:52:52] [Output] : ★ Alex Harold ...as well
  102. [2019-06-05 10:53:28] [Output] : ★ With the ignition coils now set free,Alex is able to further remove them and the sparks ((Alex Harold))
  103. [2019-06-05 10:53:52] [Output] : ★ Alex Harold twists each coil on the left side to the left until they all click
  104. [2019-06-05 10:54:04] [Output] : ★ After six clicks,all the ignition coils would be set free. ((Alex Harold))
  105. [2019-06-05 10:54:21] [Output] : ★ Alex Harold then drags them all six out and opens up his backpack,placing them into it.
  106. [2019-06-05 10:55:04] [Output] : ★ Alex Harold then makes his way to the right side of the engine in order to remove the remaining six coil
  107. [2019-06-05 10:55:07] [Output] : Alex Harold: (( coils* ))
  108. [2019-06-05 10:55:23] [Output] : ★ Alex Harold twists them each to the right in order to click them out of the spark plugs
  109. [2019-06-05 10:55:51] [Output] : ★ Alex Harold then picks up all of the six and puts them near the rest in the backpack.
  110. [2019-06-05 10:56:02] [Output] : ★ Alex Harold would then go into the car in order to lift up the trunk
  111. [2019-06-05 10:56:21] [Output] : ★ Alex Harold opens up the driver's door and leans over the center console.
  112. [2019-06-05 10:56:58] [Output] : ★ Alex Harold then pushes down the botton in order to pop the trunk up
  113. [2019-06-05 10:57:06] [Output] : ★ Alex Harold then makes his way to the trunk
  114. [2019-06-05 10:57:28] [Output] : ★ Alex Harold slides his hands under the trunk and lifts it up,letting it stay on the hydraulic arms.
  115. [2019-06-05 10:58:07] [Output] : ★ With the trunk now lifted up,Alex would be able to see the battery ((Alex Harold))
  116. [2019-06-05 10:58:28] [Output] : ★ Alex Harold uses his wrench and disconnects both battery cables starting with the negative one
  117. [2019-06-05 10:58:49] [Output] : ★ Alex Harold then lets both cables sit on the trunk's floor mat not to touch any bare metal.
  118. [2019-06-05 10:59:07] [Output] : ★ Alex Harold would then go back to the bunch of tools in order to pick up a spark plugs key
  119. [2019-06-05 10:59:39] [Output] : ★ Alex Harold leans over to the ground and picks up the key desired to unbolt the spark plugs.
  120. [2019-06-05 10:59:50] [Output] : ★ Alex Harold then returns to the car's engine holding the key with his right hand
  121. [2019-06-05 11:00:19] [Output] : ★ There would be a total of twelve spark plugs firing up the engine. ((Alex Harold))
  122. [2019-06-05 11:04:19] [Output] : ★ Alex Harold places the key on top of the firts spark plug and starts twisting it to the left.t
  123. [2019-06-05 11:04:37] [Output] : ★ As the key is rotated,the spark plug remains in the key ((Alex Harold))
  124. [2019-06-05 11:05:09] [Output] : ★ Alex Harold takes the spark plug out and places it in his backpack,reapeating the same process for the..
  125. [2019-06-05 11:05:19] [Output] : ★ Alex Harold ...rest of eleven remaining spark plugs.
  126. [2019-06-05 11:05:28] [Output] : ★ Alex Harold then places his key on the ground.
  127. [2019-06-05 22:38:40] [Output] : ★ There would be a metal cover on the front side of the engine covering the alternator and... ((Alex Harold))
  128. [2019-06-05 22:38:48] [Output] : ★ Alex Harold ...the serpentine belts
  129. [2019-06-05 22:39:07] [Output] : ★ In order to remove them,the rear bumper would have to be taken of. ((Alex Harold))
  130. [2019-06-05 22:39:21] [Output] : ★ Alex Harold searches the bumper for any bolts or clamps holding it to the chassis.
  131. [2019-06-05 22:39:51] [Output] : ★ The bumper would be held in place by twelve clamps which click out. ((Alex Harold))
  132. [2019-06-05 22:40:08] [Output] : ★ Alex Harold starts dragging the rear bumper from the left side heading to the right.
  133. [2019-06-05 22:40:27] [Output] : ★ After aplying medium force,the bumper would come off easily not breaking or damaging ((Alex Harold))
  134. [2019-06-05 22:40:58] [Output] : ★ Alex Harold heads to the engine cover with the rear bumper in his both hands
  135. [2019-06-05 22:41:18] [Output] : ★ Alex Harold places the bumper down carefully not to scratch it.
  136. [2019-06-05 22:41:30] [Output] : ★ Alex Harold would then head back to the engine to take of the rest
  137. [2019-06-05 22:41:57] [Output] : ★ Alex Harold sits down on his knees and watches the bolts holding the metal cover over the timing...
  138. [2019-06-05 22:42:01] [Output] : ★ Alex Harold ...components
  139. [2019-06-05 22:43:01] [Output] : ★ There would be a total of eight bolts holding the cover on the timing parts. ((Alex Harold))
  140. [2019-06-05 22:43:25] [Output] : ★ The impact gun would be sitting on the floor near the car due to the last performed operatio ((Alex Harold))
  141. [2019-06-05 22:43:29] [Output] : Alex Harold: (( operations* ))
  142. [2019-06-05 22:43:46] [Output] : ★ Alex Harold extends his left arm to the tool and picks it up returning to the engine.
  143. [2019-06-05 22:44:23] [Output] : ★ Alex Harold starts up the impact gun and heads to the cover of the alternator.
  144. [2019-06-05 22:44:41] [Output] : ★ There would be two bolts holding the alternator cover to the main timing cover ((Alex Harold))
  145. [2019-06-05 22:45:05] [Output] : ★ Alex Harold disconnects the two bolts holding the cover with his left arm.
  146. [2019-06-05 22:45:21] [Output] : ★ Alex Harold would then pocket up the bolts and slide the cover out placing it on the ground
  147. [2019-06-05 22:46:07] [Output] : ★ There would be another two bolts holding the power steering cover and a hose leading into it ((Alex Harold))
  148. [2019-06-05 22:46:35] [Output] : ★ Alex Harold picks up the pliers also located on the floor and bends up the clamps holding the hose in.
  149. [2019-06-05 22:46:57] [Output] : ★ Alex Harold then picks up the hose and places it around the rear frame not to damage it when removing...
  150. [2019-06-05 22:47:00] [Output] : ★ Alex Harold ...the engine
  151. [2019-06-05 22:47:46] [Output] : ★ Alex Harold then starts up the impact gun and removes the two bolts holding the power steering cover in
  152. [2019-06-05 22:47:55] [Output] : ★ Alex Harold ..holding it with his left hand after.
  153. [2019-06-05 22:48:09] [Output] : ★ Alex Harold then pockets up the two bolts and slides the cover out placing it near the other one.
  154. [2019-06-05 22:48:25] [Output] : ★ With the two small covers exposed,the serpentine belts would be clearly visible. ((Alex Harold))
  155. [2019-06-05 22:48:27] [Output] : Copied 'http://dev.owlgaming.net' to clipboard!
  156. [2019-06-05 22:49:34] [Output] : ★ Alex Harold starts up the impact gun again and makes his way to each of the eight bolts,one by one...
  157. [2019-06-05 22:49:48] [Output] : ★ Alex Harold ...dettaching them all out and holding the main cover with his left arm.
  158. [2019-06-05 22:50:34] [Output] : ADVERT: [SELLING] 1967 Ford Mustang Fastback 289 ~ great classic car | #2002002
  159. [2019-06-05 22:50:38] [Output] : ★ Alex Harold then slides out the cover with the bolts staying in their holes and places it near the other
  160. [2019-06-05 22:50:41] [Output] : ★ Alex Harold ...two covers
  161. [2019-06-05 22:50:43] [Output] : Captura de ecran efectuata: 'C:\Program Files (x86)\MTA San Andreas 1.5\screenshots\mta-screen_2019-06-05_22-50-42.png'
  162. [2019-06-05 22:51:31] [Output] : ★ The rollers,belts and the AC compressor along with it's hose and sensor would now be visible ((Alex Harold))
  163. [2019-06-05 22:51:57] [Output] : ★ Alex Harold picks up the AC compressor's wire and drags it out from it's plae.
  164. [2019-06-05 22:51:59] [Output] : Alex Harold: (( place* ))
  165. [2019-06-05 22:52:25] [Output] : ★ Alex Harold then takes it and twists it around the rear right fender not to damage it when removing....
  166. [2019-06-05 22:52:30] [Output] : ★ Alex Harold ...the rest of parts.
  167. [2019-06-05 22:52:55] [Output] : ★ Alex Harold uses the impact gun again and dettaches the bolt holding the alternator's roller in.
  168. [2019-06-05 22:53:09] [Output] : ★ Alex Harold then slides out the roller with it's bolt and places it on the right side of the car.
  169. [2019-06-05 22:53:45] [Output] : ★ The alternator would be held in place by two bolts going into the engine block ((Alex Harold))
  170. [2019-06-05 22:54:38] [Output] : ★ Alex Harold drags the serpentine belt from the radiator and mooves it away not to cut it.
  171. [2019-06-05 22:56:52] [Output] : ★ Alex Harold then starts up the impact gun and removes the two bolts holding in the alternator,holding it
  172. [2019-06-05 22:57:19] [Output] : ★ Alex Harold then slides the alternator out of it's place with the bolts and places it on the right side
  173. [2019-06-05 22:57:47] [Output] : ★ Alex Harold then picks up his wrench in order to dettach the metal hose leading inside the AC compressor
  174. [2019-06-05 22:58:06] [Output] : ★ Alex Harold locks the wrench on the washer and twists it to the left a few times dettaching it.
  175. [2019-06-05 22:58:33] [Output] : ★ Alex Harold then slides the line out of place and drags it to the rear right fender.
  176. [2019-06-05 23:00:01] [Output] : ★ Alex Harold starts up the impact gun after and dettaches the bolts holding the AC compressor as well
  177. [2019-06-05 23:00:11] [Output] : ★ Alex Harold the slides out the compressor and places it near the alternator.
  178. [2019-06-05 23:00:47] [Output] : ★ The power steering line sitting on the right leading into the pump would have a washer... ((Alex Harold))
  179. [2019-06-05 23:01:58] [Output] : ★ Alex Harold uses his wrench again to twist the washer to the left a few times.
  180. [2019-06-05 23:02:14] [Output] : ★ Alex Harold then grabs the line out and slides it to the left fender under the exhaust manifold
  181. [2019-06-05 23:03:19] [Output] : ★ Alex Harold then places his hands on the serpentine belt only sitting on the idle rollers.
  182. [2019-06-05 23:03:33] [Output] : ★ Alex Harold then drags it backwards a bit and then lifts it up removing it from the engine
  183. [2019-06-05 23:03:59] [Output] : ★ Alex Harold bends the belt in half and places it near the alternator and compressor.
  184. [2019-06-05 23:04:13] [Output] : ★ The power steering pump would be held in place by two bolts. ((Alex Harold))
  185. [2019-06-05 23:05:09] [Output] : ★ Alex Harold starts up the impact gun and makes his way to each of the bolts dettaching them both
  186. [2019-06-05 23:05:39] [Output] : ★ Alex Harold then slides out the pump with it's bolts still in place and then puts it near the alternator
  187. [2019-06-05 23:05:55] [Output] : ★ Alex Harold would then think of the next part needing to be taken out
  188. [2019-06-05 23:07:32] [Output] : ★ Alex Harold stands up to the top of the engine looking for any wires that need to be taken of.
  189. [2019-06-05 23:08:02] [Output] : ★ Alex Harold would spot a few sensor wires and takes them all out,placing then on the rear fenders
  190. [2019-06-05 23:08:06] [Output] : [English] Alex Harold says: Good,wires out...
  191. [2019-06-05 23:08:14] [Output] : [English] Alex Harold says: I have to take off the water pump,damn it
  192. [2019-06-05 23:08:26] [Output] : ★ Alex Harold sits down again and makes his way to the middle of the idle rollers.
  193. [2019-06-05 23:08:43] [Output] : ★ Sitting in the middle,there would be the watter pump that is held in by two side bolts ((Alex Harold))
  194. [2019-06-05 23:09:26] [Output] : ★ Alex Harold starts up the impact gun and then removes the two bolts holding the pump in the engine.
  195. [2019-06-05 23:09:41] [Output] : ★ Alex Harold then slides out the pump and places it near the other timing parts.
  196. [2019-06-05 23:12:19] [Output] : ★ The alternator crankshaft pulley would also be held in place by a big middle bolts. ((Alex Harold))
  197. [2019-06-05 23:12:41] [Output] : ★ Alex Harold starts up the impact gun again and makes his way to the bolt holding the pulley on the...
  198. [2019-06-05 23:12:44] [Output] : ★ Alex Harold ...crankshaft
  199. [2019-06-05 23:13:01] [Output] : ★ Alex Harold then slides the pulley out and places it on the ground near the rest of parts.
  200. [2019-06-05 23:13:25] [Output] : [English] Alex Harold says: Now get up girl!
  201. [2019-06-05 23:13:38] [Output] : ★ Alex Harold stands up and searches for the second elevator remote in his left pocket
  202. [2019-06-05 23:13:56] [Output] : ★ Alex Harold then drags the remote out and uses the top button to raise up the car lift.
  203. [2019-06-05 23:14:57] [Output] : ★ With the elevator raised up all the way,the exhaust system would be viewable from under... ((Alex Harold))
  204. [2019-06-05 23:14:59] [Output] : ★ Alex Harold ...the car
  205. [2019-06-05 23:16:13] [Output] : ★ Alex Harold inspects the mufflers and exhaust manifolds for the bolts holding them
  206. [2019-06-05 23:16:46] [Output] : ★ There would be two bolts holding each muffler to the manifolds and twelve bolts holding... ((Alex Harold))
  207. [2019-06-05 23:16:56] [Output] : ★ Alex Harold ...each exhaust manifold to the engine block.
  208. [2019-06-05 23:17:12] [Output] : ★ Alex Harold starts up the impact gun and makes his way to the right muffler
  209. [2019-06-05 23:17:33] [Output] : ★ Alex Harold places his left hand on the muffler and starts dettaching the bolts with his impact gun
  210. [2019-06-05 23:17:44] [Output] : ★ Alex Harold then pockets up the bolts and places his both hands on the muffler.
  211. [2019-06-05 23:17:57] [Output] : ★ Alex Harold slowly lowers the muffler down after and puts it on the ground.
  212. [2019-06-05 23:18:08] [Output] : ★ Alex Harold then stands up again and makes his way to the left muffler.
  213. [2019-06-05 23:18:42] [Output] : ★ Alex Harold holds the muffler with his left hand and starts dettaching the two bolts holding it
  214. [2019-06-05 23:18:56] [Output] : ★ Alex Harold then pockets the bolts and place his both hands on the muffler.
  215. [2019-06-05 23:19:12] [Output] : ★ Alex Harold drags it backwards a little and slowly brings it down,placing it near the other one
  216. [2019-06-05 23:19:34] [Output] : ★ With the mufflers now removed,there would only be the two side exhaust manifolds held in by. ((Alex Harold))
  217. [2019-06-05 23:19:45] [Output] : ★ Alex Harold ...twenty four total bolts
  218. [2019-06-05 23:20:07] [Output] : ★ Alex Harold heads to the left manifold in order to dettach the bolts.
  219. [2019-06-05 23:20:33] [Output] : ★ Alex Harold starts up the impact gun and dettaches all the twelve bolts,one by one holding the pipes...
  220. [2019-06-05 23:20:41] [Output] : ★ Alex Harold ...at the same time with the left hand
  221. [2019-06-05 23:20:59] [Output] : ★ Alex Harold then pockets the bolts and places his both hands on the exhaust manifold
  222. [2019-06-05 23:22:31] [Output] : ★ Alex Harold then lowers it down from the engine bay and holds it in his hands
  223. [2019-06-05 23:22:49] [Output] : ★ Alex Harold heads to the mufflers and places the manifold near them as well.
  224. [2019-06-05 23:23:03] [Output] : ★ Alex Harold then returns to the right exhaust manifold in order to dettach it
  225. [2019-06-05 23:24:02] [Output] : ★ Alex Harold starts up the impact gun one more time and holds the manifold with his left hand
  226. [2019-06-05 23:24:47] [Output] : ★ Alex Harold then dettaches all the twelve bolts,one by one and places them in his pocket
  227. [2019-06-05 23:25:03] [Output] : ★ Alex Harold then puts his both hands on the manifold and slides it out of place,lowering it.
  228. [2019-06-05 23:25:22] [Output] : ★ Alex Harold then makes his way to the rest of pipes to let the second manifold down.
  229. [2019-06-05 23:25:51] [Output] : ★ Alex Harold puts down the second manifold and then makes his way to the engine
  230. [2019-06-05 23:26:12] [Output] : ★ The last part on the bottom that needs to be taken out would be the oilpan. ((Alex Harold))
  231. [2019-06-05 23:26:37] [Output] : ★ The pan would be held in place by four bolts on each corner of the engine ((Alex Harold))
  232. [2019-06-05 23:26:54] [Output] : ★ Alex Harold makes his way to the main office to search for an empty pan
  233. [2019-06-05 23:27:21] [Output] : ★ Alex Harold searches under the desk and takes out and empty ten liters pan
  234. [2019-06-05 23:27:32] [Output] : ★ Alex Harold then takes it in his hand and makes his way to the car
  235. [2019-06-05 23:28:11] [Output] : ★ Alex Harold places the pan on the ground under the oil pan middle bolt to drain the oild in it.
  236. [2019-06-05 23:28:46] [Output] : ★ Alex Harold uses his wrench and dettaches the oil pan's with his left hand.
  237. [2019-06-05 23:29:12] [Output] : ★ The oil filter of the car would be attached to the cover placed over the belts. ((Alex Harold))
  238. [2019-06-05 23:29:53] [Output] : ★ As the bolt is dettached,the old oil drains out of the engine straight into the pan. ((Alex Harold))
  239. [2019-06-05 23:30:14] [Output] : ★ After two minutes,all the oil would be now drained out. ((Alex Harold))
  240. [2019-06-05 23:30:30] [Output] : ★ Alex Harold picks up the full pan and makes his way to the stairs.
  241. [2019-06-05 23:30:48] [Output] : ★ Alex Harold lets the pan down at the bottom of the stairs and returns to the engine
  242. [2019-06-05 23:31:50] [Output] : ★ Alex Harold starts up the impact gun again and heads to the bolts holding the pan.
  243. [2019-06-05 23:32:11] [Output] : ★ Alex Harold then places his hand on the pan holding it not to fall.
  244. [2019-06-05 23:32:34] [Output] : ★ Alex Harold then removes the four bolts and pockets them up,placing his right hand on the pan as well
  245. [2019-06-05 23:32:52] [Output] : ★ Alex Harold then slowly drags the pan down and places it on the left side of the car
  246. [2019-06-05 23:33:26] [Output] : ★ Alex Harold then pushes down the bottom button of the remote and lowers down the car lift.
  247. [2019-06-05 23:33:29] [Output] : * Alex Harold presses the button on the ramp controls lowering the car lift. *
  248. [2019-06-05 23:33:55] [Output] : ★ Alex Harold looks into the engine bay and looks for the engine mounts holding the block in the chassis.
  249. [2019-06-05 23:34:43] [Output] : ★ On the left side of the Subaruru,near the Suv would be a pack of four straps. ((Alex Harold))
  250. [2019-06-05 23:35:34] [Output] : ★ Alex Harold makes his way to the straps set and drags out three of them
  251. [2019-06-05 23:35:48] [Output] : ★ Alex Harold then returns to the engine in order to tie it.
  252. [2019-06-05 23:36:42] [Output] : ★ Alex Harold places the straps on the top of the engine and only holds one of them
  253. [2019-06-05 23:39:06] [Output] : ★ Alex Harold unties the strap and lets it down on the right side of the car.
  254. [2019-06-05 23:41:12] [Output] : ★ Alex Harold then throws the head of the belt around the left side and lets it fall down.
  255. [2019-06-05 23:41:27] [Output] : ★ Alex Harold then picks up the second strap and reapeats the process.
  256. [2019-06-05 23:41:42] [Output] : ★ Alex Harold goes under the car after and ties down the two straps.
  257. [2019-06-05 23:41:53] [Output] : ★ Alex Harold would then go back up and pick the third strap.
  258. [2019-06-05 23:43:05] [Output] : ★ Alex Harold ties the strap around the other two and tightens it up.
  259. [2019-06-05 23:43:12] [Output] : [English] Alex Harold says: Perfect,I m done for the moment.
  260. [2019-06-06 19:42:07] [Output] : ★ Alex Harold searches for his remote in his left pocket
  261. [2019-06-06 19:42:26] [Output] : ★ Alex Harold then picks the remote and uses the top button to raise the lift up
  262. [2019-06-06 19:43:25] [Output] : ★ Alex Harold makes his way under the car in order to inspect how the transmision is attached
  263. [2019-06-06 19:45:46] [Output] : ★ As the car is rear wheel drive,the first parts to come off are the axles. ((Alex Harold))
  264. [2019-06-06 19:46:37] [Output] : [English] Alex Harold says: Right,so I have to take the axles off.
  265. [2019-06-06 19:46:39] [Output] : [English] Alex Harold says: Hold on girl.
  266. [2019-06-06 19:46:57] [Output] : ★ Alex Harold extends his arm to the right side of the lift where the impact gun would be left.
  267. [2019-06-06 19:47:11] [Output] : ★ Alex Harold then picks up the impact gun and makes his way to the right wheel.
  268. [2019-06-06 19:48:13] [Output] : ★ Alex Harold starts up the impact gun and disconnects all the five lugnuts in a row.
  269. [2019-06-06 19:48:29] [Output] : ★ Alex Harold then places the lugnuts on the floor and slides the wheel out,placing it near the lugnuts
  270. [2019-06-06 19:50:24] [Output] : ★ The rear knuckle with the axle placed it the middle of it would now be exposed. ((Alex Harold))
  271. [2019-06-06 19:50:51] [Output] : ★ As the axles lead into the axle shaft,they will need to be dettached with the hammer ((Alex Harold))
  272. [2019-06-06 19:51:07] [Output] : ★ Alex Harold makes his way to the first lift where the bunch of tools would be.
  273. [2019-06-06 19:51:29] [Output] : ★ Alex Harold picks up a medium sized hammer and returns to the wheel's hub
  274. [2019-06-06 19:52:09] [Output] : ★ Missing the dustcap,the axle would only have the lock pin holding it. ((Alex Harold))
  275. [2019-06-06 19:52:27] [Output] : ★ Alex Harold uses his hammer and hits the pin,getting it flying off
  276. [2019-06-06 19:52:50] [Output] : ★ Alex Harold then applies medium pressure on the hammer and hits the head of the axle a few times.
  277. [2019-06-06 19:53:01] [Output] : ★ As the axle is hit,it would come off the knuckle. ((Alex Harold))
  278. [2019-06-06 19:53:21] [Output] : ★ Alex Harold goes under the car after and locates the axle.
  279. [2019-06-06 19:53:38] [Output] : ★ Alex Harold drags the head of the axle out of the hub and places it on the ramp.
  280. [2019-06-06 19:54:00] [Output] : ★ Alex Harold would then put his hands on the head leading into the axle shaft and slide the axle out.
  281. [2019-06-06 19:54:42] [Output] : ★ Alex Harold then gets the axle out and carefully places it on the floor in a safe place.
  282. [2019-06-06 19:55:01] [Output] : ★ Alex Harold would then get both,the impact gun and the hammer and make his way to the opposite wheel
  283. [2019-06-06 19:56:13] [Output] : ★ Alex Harold starts up the impact gun then and dettaches all the five lugnuts in a row,placing them on...
  284. [2019-06-06 19:56:16] [Output] : ★ Alex Harold the floor.
  285. [2019-06-06 19:56:27] [Output] : ★ Alex Harold slides the wheel out after and puts it near the lugnuts.
  286. [2019-06-06 19:56:43] [Output] : ★ Alex Harold lets the impact gun down on the ramp after and picks up the hammer in his right hand
  287. [2019-06-06 19:56:51] [Output] : ★ Alex Harold starts hitting up the pin until it goes out.
  288. [2019-06-06 19:57:11] [Output] : ★ As the pin flyes out,the axle would be ready to be hited ((Alex Harold))
  289. [2019-06-06 19:57:33] [Output] : ★ Alex Harold starts hitting the axle in the middle,aplying medium pressure.
  290. [2019-06-06 19:57:47] [Output] : ★ After a few hits,the axle would be dettached completely from the knuckle ((Alex Harold))
  291. [2019-06-06 19:57:55] [Output] : ★ Alex Harold goes under the car after and locates the left axle.
  292. [2019-06-06 19:58:32] [Output] : ★ Alex Harold pulls out the head of the axle from the knuckle and then slides it out from the shaft.
  293. [2019-06-06 19:58:51] [Output] : ★ Alex Harold carefully places down the axle after,on the floor near the other one.
  294. [2019-06-06 19:59:32] [Output] : ★ As the axles are now out,the transmision would be free to dettach. ((Alex Harold))
  295. [2019-06-06 19:59:48] [Output] : ★ Alex Harold makes his way to the bunch of tools in order to pick up a ratchet.
  296. [2019-06-06 20:00:09] [Output] : ★ Alex Harold lets the hammer down and picks up a ratchet and two medium and long extensions
  297. [2019-06-06 20:00:49] [Output] : ★ Alex Harold keeps the ratchet in his right hand and makes his way to the other corner of the garage
  298. [2019-06-06 20:01:09] [Output] : ★ The wooden pallet would be located where Alex headed. ((Alex Harold))
  299. [2019-06-06 20:01:27] [Output] : ★ Alex Harold puts his left hand under the pallet and starts pulling it to the car.
  300. [2019-06-06 20:01:50] [Output] : * Alex Harold would get the gun out holding it with his right hand *
  301. [2019-06-06 20:02:25] [Output] : ★ Alex Harold positions the wooden pallet under the transmision in order to lift it up.
  302. [2019-06-06 20:02:41] [Output] : ★ Alex Harold then goes under the car in order to get the starter out.
  303. [2019-06-06 20:03:20] [Output] : ★ Alex Harold attaches the medium size extension to his ratchet and positions the ratchet on the bottom...
  304. [2019-06-06 20:03:22] [Output] : ★ Alex Harold ...bolt
  305. [2019-06-06 20:03:34] [Output] : ★ Alex Harold then spots the alternator wire leading into the back of it.
  306. [2019-06-06 20:03:55] [Output] : ★ Alex Harold uses his left hand and pulls out the wire,leting it hang on the ramp.
  307. [2019-06-06 20:04:55] [Output] : ★ Alex Harold then twists the ratchet to the left dettaching the first bottom bolt of the alternator.
  308. [2019-06-06 20:05:15] [Output] : ★ Alex Harold then places the bolt down and heads to the right bolt of the starter
  309. [2019-06-06 20:06:37] [Output] : ★ Alex Harold twists the ratchet to the left and slides out the second bolt holding the starter in.
  310. [2019-06-06 20:06:57] [Output] : ★ Alex Harold puts the ratchet down after and disconnects the medium sized extension
  311. [2019-06-06 20:07:10] [Output] : ★ Alex Harold would then attach the long extension to it and head to the top bolt.
  312. [2019-06-06 20:07:35] [Output] : ★ Alex Harold slides the extension's head to the top bolt of the starter and starts twisting his ratchet..
  313. [2019-06-06 20:07:39] [Output] : ★ Alex Harold ...to the left
  314. [2019-06-06 20:08:28] [Output] : ★ Alex Harold then puts the ratchet on the ground and places his hands on the starter.
  315. [2019-06-06 20:08:39] [Output] : ★ Alex Harold give the starter a good shake pulling it out from it's place.
  316. [2019-06-06 20:08:59] [Output] : ★ Alex Harold then puts the starter to sit near the axles.
  317. [2019-06-06 20:09:28] [Output] : ★ Two wires leading into the transmision would be spotted by Alex when removing the starter. ((Alex Harold))
  318. [2019-06-06 20:10:12] [Output] : ★ Alex Harold pulls the wires out and lets them both hang near the alternator's cable.
  319. [2019-06-06 20:11:18] [Output] : ★ Alex Harold then makes his way to the right side of the transmision in order to dettach the clutch wire.
  320. [2019-06-06 20:11:37] [Output] : ★ The wire would have a dust cover held in by two bolts. ((Alex Harold))
  321. [2019-06-06 20:11:54] [Output] : ★ Alex Harold picks up the ratchet again and starts twisting each of the two bolts to the left.
  322. [2019-06-06 20:12:09] [Output] : ★ Alex Harold slides them out after as well as the cover and sets them aside on the floor.
  323. [2019-06-06 20:13:30] [Output] : ★ With the cable now exposed,there would only be one washer holding it in. ((Alex Harold))
  324. [2019-06-06 20:13:56] [Output] : ★ Alex Harold sets the ratchet down and picks up the wrench returning to the washer.
  325. [2019-06-06 20:14:06] [Output] : ★ Alex Harold twists the washer to the left in order to get it out.
  326. [2019-06-06 20:14:25] [Output] : ★ Alex Harold then puts the wrench down and returns to the cable.
  327. [2019-06-06 20:14:48] [Output] : ★ Alex Harold pulls out the cable from the transmision and lets it rest on the ground.
  328. [2019-06-06 20:16:27] [Output] : ★ Alex Harold then inspects the transmision to check for all the bolts holding it.
  329. [2019-06-06 20:16:57] [Output] : ★ The transmion itself would have eight bolts holding it and the support in the back would... ((Alex Harold))
  330. [2019-06-06 20:17:08] [Output] : ★ Alex Harold ...have two bolts tightened into the chassis.
  331. [2019-06-06 20:17:23] [Output] : ★ Alex Harold makes his way to the bunch of tools one more time
  332. [2019-06-06 20:17:41] [Output] : ★ Alex Harold picks up the twelve tons jack and returns under the car.
  333. [2019-06-06 20:18:50] [Output] : ★ Alex Harold slides the jack under the wooden pallet and starts lifting it up.
  334. [2019-06-06 20:19:08] [Output] : ★ As the pallet is lifted up a bit,Alex goes to the driver's wheel ((Alex Harold))
  335. [2019-06-06 20:19:11] [Output] : Alex Harold: (( door* ))
  336. [2019-06-06 20:20:28] [Output] : ★ Alex Harold opens up the door and then lowers the lift using it's remote
  337. [2019-06-06 20:20:36] [Output] : * Alex Harold presses the button on the ramp controls lowering the car lift. *
  338. [2019-06-06 20:21:35] [Output] : ★ Alex Harold steps into the car and makes his way to the center console where the shifter is.
  339. [2019-06-06 20:22:09] [Output] : ★ Alex Harold pulls up the cover near of the shifter and places it on the right seat.
  340. [2019-06-06 20:22:50] [Output] : ★ As the cover is removed,the shifter would be exposed. ((Alex Harold))
  341. [2019-06-06 20:23:44] [Output] : ★ Alex Harold puts his right hand on the shift knob and starts twisting it to the left,dettaching it.
  342. [2019-06-06 20:25:01] [Output] : ★ Alex Harold then puts the knob on the seat near the cover and then inspects the shifter's bolts.
  343. [2019-06-06 20:25:32] [Output] : ★ In order to dettach the transmision the shifter and a metal plate have to come off. ((Alex Harold))
  344. [2019-06-06 20:25:35] [Output] : Vehicle spawn position set.
  345. [2019-06-06 20:25:45] [Output] : ★ Alex Harold steps out of the vehicle and picks up the ratchet.
  346. [2019-06-06 20:25:57] [Output] : ★ Alex Harold then returns into the car and starts working on the shifter.
  347. [2019-06-06 20:26:25] [Output] : ★ The shifter would have four bolts holding it into the transmision. ((Alex Harold))
  348. [2019-06-06 20:26:34] [Output] : [English] Alex Harold ((In Car)) says: Right,so I only have to take out the bottom bolts.
  349. [2019-06-06 20:26:54] [Output] : ★ Alex Harold puts the ratchet on one of the bolts and starts rotating it to the left,dettaching it.
  350. [2019-06-06 20:27:06] [Output] : ★ Alex Harold then reapeats the process for the second bolt and places them both on the seat.
  351. [2019-06-06 20:28:35] [Output] : ★ Alex Harold pulls up the shifter after and places it on the floor at the passenger's seat
  352. [2019-06-06 20:30:34] [Output] : ★ Alex Harold then uses his ratchet and starts taking out the four bolts holding the plate and the...
  353. [2019-06-06 20:30:41] [Output] : ★ Alex Harold ..transmision to the interior
  354. [2019-06-06 20:31:27] [Output] : ★ Alex Harold then picks up the plate along with the bolts and places it near the shifter.
  355. [2019-06-06 20:31:39] [Output] : ★ Alex Harold then takes the ratchet and steps out of the car.
  356. [2019-06-06 20:31:41] [Output] : Vehicle spawn position set.
  357. [2019-06-06 20:32:25] [Output] : ★ Alex Harold uses the remote again and raises up the lift.
  358. [2019-06-06 20:32:30] [Output] : * Alex Harold presses the button on the ramp controls raising the car lift. *
  359. [2019-06-06 20:32:52] [Output] : ★ Alex Harold pulls the jack's lever up all the way,getting the pallet under the transmision
  360. [2019-06-06 20:33:06] [Output] : ★ Alex Harold then puts the ratchet down and picks up his impact gun
  361. [2019-06-06 20:33:20] [Output] : ★ Alex Harold goes under the car after to dettach the bolts.
  362. [2019-06-06 20:33:40] [Output] : ★ Alex Harold goes to the back of the transmision in order to dettach the support arm from the chassis
  363. [2019-06-06 20:34:03] [Output] : ★ Alex Harold starts up the impact gun and dettaches the two bolts,placing them near the axles.
  364. [2019-06-06 20:34:29] [Output] : ★ Alex Harold then goes to the front side of the transmisions in order to take out the eight bolts holding
  365. [2019-06-06 20:34:34] [Output] : ★ Alex Harold ...it to the engine block.
  366. [2019-06-06 20:35:12] [Output] : ★ Alex Harold starts up the impact gun and dettaches all the eight bolts in a row.
  367. [2019-06-06 20:35:36] [Output] : ★ Alex Harold then places the bolts near the other two ones and locks the jack with his left foot.
  368. [2019-06-06 20:36:12] [Output] : ★ Alex Harold would then wiggle the transmision a back a little to dettach it from the engine
  369. [2019-06-06 20:36:26] [Output] : ★ With the transmision now dettached,Alex would be able to lower it down. ((Alex Harold))
  370. [2019-06-06 20:36:40] [Output] : ★ Alex Harold pulls the jack's lever down,lowering the transmision.
  371. [2019-06-06 20:37:07] [Output] : ★ Alex Harold then drags the pallet with his jack and makes the way of the gearbox in a safe place
  372. [2019-06-06 20:37:48] [Output] : [English] Alex Harold says: Pause up a little,I will continue you girl later
  373. [2019-06-07 15:42:20] [Output] : ★ The only pieces left to dettach to take the engine out would be the clutch assembly and... ((Alex Harold))
  374. [2019-06-07 15:42:31] [Output] : ★ ...the four engine mounts. ((Alex Harold))
  375. [2019-06-07 15:42:52] [Output] : ★ Alex Harold heads to the clutch and inspects it around to see the bolts holding it.
  376. [2019-06-07 15:43:36] [Output] : ★ There would be six bolts holding the pressure plate on the clutch plate. ((Alex Harold))
  377. [2019-06-07 15:44:41] [Output] : ★ Alex Harold heads to the back of the car where his impact gun would be left.
  378. [2019-06-07 15:44:54] [Output] : ★ Alex Harold then picks up the impact gun and returns to the pressure plate.
  379. [2019-06-07 15:45:12] [Output] : ★ Alex Harold lowers down the lift a bit to get the car closer to him
  380. [2019-06-07 15:45:16] [Output] : * Alex Harold presses the button on the ramp controls lowering the car lift. *
  381. [2019-06-07 15:45:19] [Output] : * Alex Harold presses the button on the ramp controls lowering the car lift. *
  382. [2019-06-07 15:45:38] [Output] : ★ Alex Harold extends his arms to the plate and sets his left arm on it to lock it in place.
  383. [2019-06-07 15:46:06] [Output] : ★ Alex Harold then starts up his impact gun and removes the six bolts holding the plate one after the othe
  384. [2019-06-07 15:46:09] [Output] : Alex Harold: (( other* ))
  385. [2019-06-07 15:46:23] [Output] : ★ Alex Harold then drops the bolts down and places his both hands on the pressure plate.
  386. [2019-06-07 15:46:34] [Output] : ★ Alex Harold slowly lowers the plate from it's place,dragging it backwards
  387. [2019-06-07 15:46:58] [Output] : ★ Alex Harold then leans over to the floor on the left side of the car to let down the plate
  388. [2019-06-07 15:47:17] [Output] : ★ Alex Harold puts the clutch pressure plate on the floor and then returns to the car.
  389. [2019-06-07 15:47:44] [Output] : ★ The only parts left in place would be the clutch plate,the middle bearing and the flywheel. ((Alex Harold))
  390. [2019-06-07 15:47:54] [Output] : ★ Alex Harold leans over to the floor and places his impact gun down.
  391. [2019-06-07 15:48:11] [Output] : ★ Alex Harold would then make his way to the bunch of tools in order to pick up a bearing wrench
  392. [2019-06-07 15:48:32] [Output] : ★ Alex Harold leans over the tools and searches for the bearing wrench
  393. [2019-06-07 15:48:43] [Output] : ★ Alex Harold finds it and picks it up returning to the car.
  394. [2019-06-07 15:50:08] [Output] : ★ Alex Harold inserts the wrench into the middle bolt and slides it all the way in.
  395. [2019-06-07 15:51:15] [Output] : ★ Alex Harold then uses the wrench's lever and makes the arms slides behind the bearing.
  396. [2019-06-07 15:51:28] [Output] : ★ As the bearing is now locked up,Alex would be able to pull it. ((Alex Harold))
  397. [2019-06-07 15:51:48] [Output] : ★ Alex Harold slides out the wrench along with the bearing,placing them both down near the axles.
  398. [2019-06-07 15:52:28] [Output] : ★ Alex Harold returns to the clutch after and makes his way further in the process
  399. [2019-06-07 15:52:50] [Output] : ★ Alex Harold places his hands on the clutch plate and slides it out of it's place.
  400. [2019-06-07 15:53:06] [Output] : ★ Alex Harold then picks up the plate and returns where the pressure plate is placed.
  401. [2019-06-07 15:53:31] [Output] : ★ Alex Harold lets down the clutch plate and further returns to the car.
  402. [2019-06-07 15:53:47] [Output] : ★ Alex Harold inspects the flywheel to check for the bolts holding it.
  403. [2019-06-07 15:54:42] [Output] : ★ As noticed,the fly wheel would have six bolts holding it to the engine block. ((Alex Harold))
  404. [2019-06-07 15:54:51] [Output] : ★ Alex Harold leans over to the ground and picks up his impact gun.
  405. [2019-06-07 15:55:01] [Output] : ★ Alex Harold then returns up to the flywheel in order to get it out.
  406. [2019-06-07 15:55:25] [Output] : ★ Alex Harold places his left hand on the flywheel,preventing it from spining and starts dettaching the...
  407. [2019-06-07 15:55:31] [Output] : ★ Alex Harold ...bolts from the top to the bottom.
  408. [2019-06-07 16:02:40] [Output] : ★ Alex Harold then slides out the six bolts,throwing them on the ground
  409. [2019-06-07 16:02:57] [Output] : ★ Alex Harold places his both hands on the flywheel then,further sliding it out.
  410. [2019-06-07 16:03:22] [Output] : ★ Alex Harold makes his way with the flywheel in his hands in order to place it near the other clutch part
  411. [2019-06-07 16:03:35] [Output] : ★ Alex Harold lets the flywheel down and returns to the car
  412. [2019-06-08 12:21:40] [Output] : ★ Alex Harold looks over to the engine bay spotting the four engine mounts.
  413. [2019-06-08 12:22:11] [Output] : ★ Alex Harold then checks the bolts holding the mounts,noticing that they can be take off from the top
  414. [2019-06-08 12:23:00] [Output] : ★ Alex Harold heads into the towtruck in order to use it to lift the engine up
  415. [2019-06-08 12:24:18] [Output] : ★ The remote controling the towtruck's hook would be sitting on the dash ((Alex Harold))
  416. [2019-06-08 12:24:45] [Output] : ★ Alex Harold grabs the remote in his hands and then easily pushes the bottom button until the hook gets..
  417. [2019-06-08 12:24:49] [Output] : ★ Alex Harold ...on top of the engine
  418. [2019-06-08 12:25:57] [Output] : ★ Alex Harold then puts the remote back on the dash and steps out,returning to the engine.
  419. [2019-06-08 12:26:31] [Output] : ★ Alex Harold then drags the hook under the middle strap,lifting it up.
  420. [2019-06-08 12:26:42] [Output] : ★ Alex Harold returns into the truck in order to lift up the hook.
  421. [2019-06-08 12:27:11] [Output] : ★ Alex Harold grabs the remote from the dash and pushes it's upper button .
  422. [2019-06-08 12:27:31] [Output] : ★ As the hook raises up the strap holding it,Alex stops. ((Alex Harold))
  423. [2019-06-08 12:27:59] [Output] : ★ Alex Harold returns to the car after in order to dettach the four mounts.
  424. [2019-06-08 12:28:16] [Output] : ★ The impact gun would be sitting on the floor,on the right side of the car. ((Alex Harold))
  425. [2019-06-08 12:28:36] [Output] : ★ Alex Harold leans over to the floor and picks the impact gun up.
  426. [2019-06-08 12:28:52] [Output] : ★ Alex Harold then heads into the engine bay and points the first engine mount.
  427. [2019-06-08 12:29:03] [Output] : ★ There would be one bolt holding each mount to the chassis. ((Alex Harold))
  428. [2019-06-08 12:29:59] [Output] : ★ Alex Harold starts up the impact gun and dettaches the first bolt,placing it in the back of the towtruck
  429. [2019-06-08 12:30:08] [Output] : ★ Alex Harold then makes his way to the second mount
  430. [2019-06-08 12:30:27] [Output] : ★ Alex Harold positions the impact gun on top of it and starts it up to dettach the bolt.
  431. [2019-06-08 12:30:44] [Output] : ★ Alex Harold then picks the bolt up,placing it on the back of the truck.
  432. [2019-06-08 12:31:04] [Output] : ★ Alex Harold then heads to the opposite side of the car and repeats the same exact process for the two...
  433. [2019-06-08 12:31:11] [Output] : ★ Alex Harold ...remaining mounts.
  434. [2019-06-08 12:31:31] [Output] : ★ As the mounts are now dettached from the chassis,they would come off with the engine ((Alex Harold))
  435. [2019-06-08 12:32:08] [Output] : ★ Alex Harold makes his way to the towtruck and steps inside it.
  436. [2019-06-08 12:32:27] [Output] : ★ Alex Harold grabs the remote and uses it's top button to raise up the engine from the bay
  437. [2019-06-08 12:32:48] [Output] : ★ As the hook is slowly lifted,the engine leaves the bay ((Alex Harold))
  438. [2019-06-08 12:33:06] [Output] : ★ Alex Harold then drives slowly forward,taking it fully out
  439. [2019-06-08 12:33:35] [Output] : ★ Alex Harold stops after he turns and steps back again from the towtruck
  440. [2019-06-08 12:33:55] [Output] : ★ You would now be able to see the engine hanging from the hook ((Alex Harold))
  441. [2019-06-08 12:34:20] [Output] : ★ Alex Harold then makes his way to pick the engine stand up and moove it to the engine.
  442. [2019-06-08 12:35:04] [Output] : ★ Alex Harold gets at the back of the engine stand,pushing it on it's wheels to the back of the engine
  443. [2019-06-08 12:35:33] [Output] : ★ Alex Harold then makes his way to the back of the engine without the crane in order to pick up...
  444. [2019-06-08 12:35:42] [Output] : ★ Alex Harold ...the metal gasket of the gearbox.
  445. [2019-06-08 12:36:01] [Output] : ★ Alex Harold grabs the gasket out with his hands and places it near the car
  446. [2019-06-08 12:36:28] [Output] : ★ Alex Harold then returns to the back of the stand and slowly pushes it
  447. [2019-06-08 12:37:00] [Output] : ★ Alex Harold starts pushing the stand a bit bit a bit getting it close to the engine
  448. [2019-06-08 12:37:18] [Output] : ★ Alex Harold then steps inside the towtruck in order to lower the hook
  449. [2019-06-08 12:37:51] [Output] : ★ Alex Harold grabs the hook's remote and lowers down the hook making the engine sit near the stand.
  450. [2019-06-08 12:38:17] [Output] : ★ Alex Harold then lets down the remote and steps back out
  451. [2019-06-08 12:38:29] [Output] : ★ Alex Harold makes his way to the stand again further pushing it
  452. [2019-06-08 12:38:45] [Output] : ★ Alex Harold pushes down the stand a bit until he reminds of something.
  453. [2019-06-08 12:38:51] [Output] : [English] Alex Harold says: The bolts you idiot.
  454. [2019-06-08 12:39:00] [Output] : ★ Alex Harold heads over to the impact gun,picking it up
  455. [2019-06-08 12:39:15] [Output] : ★ Alex Harold leans over to the impact gun and makes his way to the front of the engine stand.
  456. [2019-06-08 12:40:18] [Output] : ★ There would be eight bolts tightened over the holes of the stand. ((Alex Harold))
  457. [2019-06-08 12:40:43] [Output] : ★ Alex Harold starts the impact gun up and dettaches the eight bolts one by one,placing them on the ground
  458. [2019-06-08 12:40:58] [Output] : ★ Alex Harold then makes his way to the back of the stand and starts pushing it to hit the holes.
  459. [2019-06-08 12:41:28] [Output] : ★ Alex Harold pushes the stand until the holes stand over the transmision holes.
  460. [2019-06-08 12:41:44] [Output] : ★ Alex Harold then slowly allings the stand and then uses his left foot to engage his brake.
  461. [2019-06-08 12:44:07] [Output] : ★ Alex Harold lets the stand free after and leans over to the ground
  462. [2019-06-08 12:44:22] [Output] : ★ Alex Harold picks up the eight bolts and heads to the back of the stand.
  463. [2019-06-08 12:46:15] [Output] : ★ Alex Harold inserts the bolts in the holes,twisting each of them in the engine.
  464. [2019-06-08 12:46:35] [Output] : ★ Alex Harold then uses his impact gun and tigthens them up in a criss cross pattern.
  465. [2019-06-08 12:47:01] [Output] : ★ As the engine is now attached to the stand,Alex hads back at the top of the engine ((Alex Harold))
  466. [2019-06-08 12:47:41] [Output] : ★ Alex Harold looks over the straps noticing that they are pretty unsafe to dettach now.
  467. [2019-06-08 12:47:59] [Output] : [English] Alex Harold says: Better lower the hook more or I will get this things flying into my face...
  468. [2019-06-08 12:48:09] [Output] : ★ Alex Harold steps inside the towtruck and heads to the remote
  469. [2019-06-08 12:49:17] [Output] : ★ Alex Harold grabs the remote in his hands and uses it's lower button to lower down the hook.
  470. [2019-06-08 12:50:02] [Output] : ★ Alex Harold lowers down the hook until it hits the top of the engine block and then stops.
  471. [2019-06-08 12:50:18] [Output] : ★ Alex Harold places the hook's remote back on the dash and steps out,returning to the engine
  472. [2019-06-08 12:50:49] [Output] : ★ As the three straps have no more pressure against them,they would return into the normal... ((Alex Harold))
  473. [2019-06-08 12:50:52] [Output] : ★ Alex Harold ...position.
  474. [2019-06-08 12:51:10] [Output] : ★ Alex Harold grabs the clicket of the top tied strap and then unties it.
  475. [2019-06-08 12:51:36] [Output] : ★ Alex Harold then slides the strap from under the other two and throws it in the back of the truck
  476. [2019-06-08 12:52:28] [Output] : ★ Alex Harold leans over under the engine and makes his way to the second strap.
  477. [2019-06-08 12:52:45] [Output] : ★ Alex Harold uses it's clicket and then disconnects the strap,dragging it under the engine.
  478. [2019-06-08 12:52:55] [Output] : ★ Alex Harold then packs up the strap and throws it near the other one.
  479. [2019-06-08 12:53:57] [Output] : ★ Alex Harold heads to the last strap's clicket and finally drags it up and down unting the strap.
  480. [2019-06-08 12:54:12] [Output] : ★ Alex Harold then drags the strap all the way to the bottom of the engine and packs it.
  481. [2019-06-08 12:54:32] [Output] : ★ Alex Harold throws near the other two,then returning into the truck
  482. [2019-06-08 12:54:52] [Output] : ★ Alex Harold steps inside the towtruck and grabs the remote in his hands as he goes
  483. [2019-06-08 12:55:16] [Output] : ★ Alex Harold then uses the top button of the remote,lifting up the hook from the engine block.
  484. [2019-06-08 12:55:32] [Output] : ★ Alex Harold then goes forward,parking the truck in a safe spot
  485. [2019-06-08 12:56:06] [Output] : ★ Alex Harold lets the remote sit again on the dash and steps out of the towtruck,returning to the engine
  486. [2019-06-08 12:56:37] [Output] : ★ Alex Harold goes to the back of the stand and unlocks the foot brake
  487. [2019-06-08 12:57:04] [Output] : ★ Alex Harold then starts dragging the stand with all his force to the side wall of the garage.
  488. [2019-06-08 12:57:21] [Output] : * Alex Harold would have an easy job pulling it due to the fact that the stand sits on wheels *
  489. [2019-06-08 12:58:55] [Output] : ★ As the engine stand is placed in the wanted position,Alex makes his way to the rear of it ((Alex Harold))
  490. [2019-06-08 13:00:38] [Output] : ★ Alex Harold then pushes down the brake and locks the stand in place.
  491. [2019-06-08 13:01:24] [Output] : ★ Alex Harold then heads to the front of the engine with his impact gun in his right hand.
  492. [2019-06-08 13:01:41] [Output] : ★ Alex Harold sits down and places his left hand on the engine sustaining it.
  493. [2019-06-08 13:03:00] [Output] : ★ There would be five idle rollers of the serpentine belt still attached to the engine. ((Alex Harold))
  494. [2019-06-08 13:03:16] [Output] : ★ Alex Harold starts up the impact gun and makes his way to the first roller,dettaching it's bolt.
  495. [2019-06-08 13:04:14] [Output] : ★ Alex Harold then slides out the roller and places it near the engine stand on the right side.
  496. [2019-06-08 13:04:36] [Output] : ★ Alex Harold then heads back to the rest of the rollers and repeats the same process dettaching all four
  497. [2019-06-08 13:07:48] [Output] : ★ The final cover placed over the timing would be the held in by twelve bolts. ((Alex Harold))
  498. [2019-06-08 13:08:04] [Output] : ★ Alex Harold heads up to the first top bolt and starts dettaching it using the impact gun.
  499. [2019-06-08 13:08:56] [Output] : ★ Alex Harold then slides the bolt out and places it on the ground.
  500. [2019-06-08 13:09:27] [Output] : ★ Alex Harold places his left hand on the cover to prevent it from falling and repeats the process...
  501. [2019-06-08 13:09:35] [Output] : ★ Alex Harold ...dettaching the rest of eleven bolts.
  502. [2019-06-08 13:10:02] [Output] : ★ Alex Harold then grabs the metal cover with his both hands and slides it out,placing it on the left side
  503. [2019-06-08 13:10:05] [Output] : ★ Alex Harold ...of the engine stand.
  504. [2019-06-08 13:10:11] [Output] : [English] Alex Harold says: Shit is heavy
  505. [2019-06-08 13:10:52] [Output] : ★ The timing of the engine would now be exposed with the camshaft gears,the two v belts... ((Alex Harold))
  506. [2019-06-08 13:11:01] [Output] : ★ Alex Harold ...the oil pump and the crankshaft pulley.
  507. [2019-06-08 13:12:42] [Output] : ★ There would also be one more belt connecting the pulley to the pump. ((Alex Harold))
  508. [2019-06-08 13:13:03] [Output] : ★ Alex Harold makes his way to the oil pump and starts looking around for it's bolts
  509. [2019-06-08 13:14:15] [Output] : ★ Four bolts would be holding the pump to the engine block place in an X pattern. ((Alex Harold))
  510. [2019-06-08 13:14:31] [Output] : ★ Alex Harold starts up the impact gun and makes his way to the first bolt.
  511. [2019-06-08 13:14:46] [Output] : ★ Alex Harold dettaches the bolt and places it near the timing cover.
  512. [2019-06-08 13:15:01] [Output] : ★ Alex Harold then grabs the impact gun and makes his way to the second top bolt,dettaching it as well.
  513. [2019-06-08 13:15:27] [Output] : ★ Alex Harold goes to one of the bottom bolts after and then dettaches it,placing it on the ground as well
  514. [2019-06-08 13:15:47] [Output] : ★ Alex Harold puts his left hand over the oilpump and it's gear after,preventing it from falling.
  515. [2019-06-08 13:16:06] [Output] : ★ Alex Harold puts the impact gun on top of the last bolt and then drags it out,placing it near the others
  516. [2019-06-08 13:16:27] [Output] : ★ Alex Harold then slides the oil pump out and lifts it a bit to loosen the belt
  517. [2019-06-08 13:18:31] [Output] : ★ Alex Harold then places the oil pump on the top of the timing cover and returns to the front of the...
  518. [2019-06-08 13:18:37] [Output] : ★ Alex Harold ...timing
  519. [2019-06-08 13:19:09] [Output] : ★ Alex Harold spots the bolt of the crankshaft pulley and puts the impact gun on top of it in order to...
  520. [2019-06-08 13:19:15] [Output] : ★ Alex Harold ...dettach it.
  521. [2019-06-08 13:19:32] [Output] : ★ Alex Harold slides the bolt out while holding the pulley with his left hand and places it down.
  522. [2019-06-08 13:19:51] [Output] : ★ Alex Harold then slides the pulley out,raising it a bit after to loosen the two timing belts.
  523. [2019-06-08 13:21:59] [Output] : ★ As all four camshaft gears have no bolts and are only tightened down by the two belts... ((Alex Harold))
  524. [2019-06-08 13:22:08] [Output] : ★ ...they can be slided out of place ((Alex Harold))
  525. [2019-06-08 13:22:45] [Output] : ★ Alex Harold puts his hand on the left belt and slides it out,picking the right one after.
  526. [2019-06-08 13:22:57] [Output] : ★ Alex Harold then puts the belts on the timing cover,leting them sit
  527. [2019-06-08 13:23:08] [Output] : [English] Alex Harold says: Enough now...I am taking a little pause
  528. [2019-06-08 23:02:57] [Output] : ★ Alex Harold leans over the ground picking up the impact gun in his right hand
  529. [2019-06-08 23:03:32] [Output] : ★ Alex Harold then stands up and heads to the left engine head cover
  530. [2019-06-08 23:04:18] [Output] : ★ Alex Harold then looks over at the head covers noticing the bolts.
  531. [2019-06-08 23:04:58] [Output] : ★ There would be twelve bolts holding each of the head covers over the engine heads. ((Alex Harold))
  532. [2019-06-08 23:06:31] [Output] : ★ Alex Harold heads his impact gun to the first bolt of the cover dettaching it.
  533. [2019-06-08 23:06:48] [Output] : ★ Alex Harold then pulls the bolt up and places it on the floor,returning to the rest of bolts
  534. [2019-06-08 23:07:23] [Output] : ★ Alex Harold then repeats the process for the rest of eleven bolts taking them out and placing all of ...
  535. [2019-06-08 23:07:30] [Output] : ★ Alex Harold ...them near the other one
  536. [2019-06-08 23:08:03] [Output] : ★ As the twelve bolts would now be dettached,the head cover would be free. ((Alex Harold))
  537. [2019-06-08 23:08:22] [Output] : ★ Alex Harold picks up the first cover and slides it out,placing it on the ground
  538. [2019-06-08 23:09:27] [Output] : ★ As the cover is now removed,you would be able to notice the two camshafts and their gears ((Alex Harold))
  539. [2019-06-08 23:09:42] [Output] : ★ Alex Harold then makes his way to the other side of the engine,starting to dettach the bolts.
  540. [2019-06-08 23:11:01] [Output] : ★ Alex Harold makes his way to the first bolt,positioning the impact gun on top of it and then starting it
  541. [2019-06-08 23:11:18] [Output] : ★ Alex Harold then drags the impact gun slowly out,taking the bolt out as well.
  542. [2019-06-08 23:11:58] [Output] : ★ Alex Harold picks up the bolt and throws it in the pile where the other twelve one would be.
  543. [2019-06-08 23:12:27] [Output] : ★ Alex Harold then repeats the same exact process dettaching the rest of eleven bolts and placing them dow
  544. [2019-06-08 23:12:30] [Output] : Alex Harold: (( down* ))
  545. [2019-06-08 23:13:17] [Output] : ★ Alex Harold then grabs the head cover with his both hands and makes his way to the other side of the...
  546. [2019-06-08 23:13:26] [Output] : ★ Alex Harold ...engine,placing it near the first one
  547. [2019-06-09 00:19:35] [Output] : ★ Alex Harold leans over and picks up the impact gun,heading on the top of the engine
  548. [2019-06-09 00:19:48] [Output] : ★ Alex Harold then gets a pack of ciggaretes out and drags a ciggarete out of it.
  549. [2019-06-09 00:19:52] [Output] : * Alex Harold looks inside their pack of cigarettes, and takes one out. *
  550. [2019-06-09 00:19:53] [Output] : * Alex Harold lights up a cigarette. *
  551. [2019-06-09 00:20:22] [Output] : ★ Alex Harold takes a smoke from the ciggarete as he is checking the bolts holding the camshafts.
  552. [2019-06-09 00:21:54] [Output] : ★ There would be five bearings with two bolts each that need to come out as well as the gear ((Alex Harold))
  553. [2019-06-09 00:22:11] [Output] : ★ Alex Harold puts his hand on the gear and uses his force to slide it out
  554. [2019-06-09 00:22:34] [Output] : ★ As the camgears have no bolt and are only held down using the timing belt,Alex would be .. ((Alex Harold))
  555. [2019-06-09 00:22:41] [Output] : ★ ...able to slide the gear out ((Alex Harold))
  556. [2019-06-09 00:23:03] [Output] : ★ Alex Harold then lets the gear down and slides the second one as well
  557. [2019-06-09 00:23:23] [Output] : ★ Alex Harold then takes a smoke from the ciggarete,ashing on the floor while he looks at the bearings
  558. [2019-06-09 00:24:27] [Output] : ★ Alex Harold holds the ciggarete in his mouth,placing his both hands on the engine head
  559. [2019-06-09 00:24:45] [Output] : ★ Alex Harold then starts up the impact gun and takes out the two bolts holding the front bearing.
  560. [2019-06-09 00:25:00] [Output] : ★ Alex Harold slides out the bearing itself after with the bolts remaining in place
  561. [2019-06-09 00:25:26] [Output] : ★ Alex Harold then mooves to the rear bearing while he takes a smoke from the ciggarete.
  562. [2019-06-09 00:25:48] [Output] : ★ Alex Harold starts up the impact gun and dettaches the two bolts of the rear bearing as well.
  563. [2019-06-09 00:26:51] [Output] : ★ Alex Harold drags the bearing out and puts it down near the other one,taking the ciggarete and ashing it
  564. [2019-06-09 00:27:12] [Output] : ★ Alex Harold ...with his opposite hand
  565. [2019-06-09 00:27:39] [Output] : ★ Alex Harold then uses the impact gun and dettaches the rest of three bearings,placing them on the ground
  566. [2019-06-09 00:28:48] [Output] : ★ Alex Harold then uses his right hand and picks up the first free camshaft,placing it down near the...
  567. [2019-06-09 00:28:50] [Output] : ★ Alex Harold ...bearings.
  568. [2019-06-09 00:29:09] [Output] : ★ Alex Harold takes the last smoke from the ciggarete and throws the butt away returning to work
  569. [2019-06-09 00:29:36] [Output] : ★ Alex Harold starts up the impact gun and makes his way to the front bearing of the second shaft
  570. [2019-06-09 00:30:02] [Output] : ★ Alex Harold dettaches the bolts using the impact gun and places the bearing down near the rest
  571. [2019-06-09 00:30:40] [Output] : ★ Alex Harold then mooves the impact gun to the back bearing,dettaching it's two bolts as well.
  572. [2019-06-09 00:32:56] [Output] : ★ Alex Harold drags up the bearing and places it near the other six ones keeping the bolts in place
  573. [2019-06-09 00:33:24] [Output] : ★ Alex Harold then repeats the process dettaching the rest of three bearings out of the engine head.
  574. [2019-06-09 00:35:07] [Output] : ★ Alex Harold then places his both hands on the camshaft and takes out the second camshaft,placing it near
  575. [2019-06-09 00:35:12] [Output] : ★ Alex Harold ...the first one
  576. [2019-06-09 00:36:11] [Output] : ★ Alex Harold then inspects the engine head over looking for the bolts holding it to the block.
  577. [2019-06-09 00:36:23] [Output] : ★ There would be eight bolts holding the head to the engine. ((Alex Harold))
  578. [2019-06-09 00:36:48] [Output] : ★ Alex Harold starts up the impact gun and mooves it all over the eight,loosening up the bolts.
  579. [2019-06-09 00:37:12] [Output] : ★ Alex Harold then places his both hands on the engine head,lifting it up and placing it on the ground.
  580. [2019-06-09 00:37:28] [Output] : ★ The heads gasket would now be viewable along with the pistons ((Alex Harold))
  581. [2019-06-09 00:37:38] [Output] : [English] Alex Harold says: Coming back to the other side later,I want a ride
  582. [2019-06-09 01:16:12] [Output] : ★ Alex Harold leans over to the ground and picks up the impact gun again
  583. [2019-06-09 01:16:23] [Output] : ★ Alex Harold then heads to the left side of the engine in order to get the head out
  584. [2019-06-09 01:16:48] [Output] : ★ Alex Harold hits the camgears with the impact gun in order to get them dettached.
  585. [2019-06-09 01:17:01] [Output] : ★ As the gears are being hit,they would fall down on the ground ((Alex Harold))
  586. [2019-06-09 01:17:13] [Output] : ★ Alex Harold leans over and places them near the other two
  587. [2019-06-09 01:17:54] [Output] : ★ Alex Harold then heads back to the camshafts bearings in order to get them out
  588. [2019-06-09 01:18:26] [Output] : ★ Alex Harold starts up the impact gun and dettaches the front bearing's bolts,lifting the bearing up
  589. [2019-06-09 01:18:45] [Output] : ★ Alex Harold then gets the bearing down near the other ten and makes his way back again
  590. [2019-06-09 01:21:43] [Output] : ★ Alex Harold heads to the back bearing and uses his impact gun to loosen up it's two bearings.
  591. [2019-06-09 01:21:57] [Output] : ★ Alex Harold then lifts up the bearing and positions it on the floor near the other two ones.
  592. [2019-06-09 01:24:57] [Output] : ★ Alex Harold returns to the last three bearings and reapeats the process dettaching them and placing them
  593. [2019-06-09 01:25:02] [Output] : ★ Alex Harold ...near the other ones
  594. [2019-06-09 01:25:24] [Output] : ★ Alex Harold then returns to the camshaft and grabs it with his both hands
  595. [2019-06-09 01:26:07] [Output] : ★ Alex Harold takes the camshaft out of it's place and puts it near the other twos on the ground
  596. [2019-06-09 01:26:22] [Output] : ★ Alex Harold then returns to the last camshaft in order to take it's bearings out as well
  597. [2019-06-09 01:26:49] [Output] : ★ Alex Harold positions his impact gun over the front camshaft bearing's bolts and loosens them up
  598. [2019-06-09 01:27:01] [Output] : ★ Alex Harold then lifts up the bearing and places it over on the ground near the other ones.
  599. [2019-06-09 01:27:13] [Output] : ★ Alex Harold then stands up and goes to the back bearing
  600. [2019-06-09 01:27:46] [Output] : ★ Alex Harold uses the impact gun and loosens the two bolts holding the bearing
  601. [2019-06-09 01:28:01] [Output] : ★ Alex Harold then picks the bearing up and drags it on the floor near the other ones
  602. [2019-06-09 01:28:21] [Output] : ★ Alex Harold then returns to the last three bearings and repeats the process dettaching them all three.
  603. [2019-06-09 01:28:40] [Output] : ★ Alex Harold then uses his both hands and picks up the camshaft,placing it near the other threes as well
  604. [2019-06-09 01:28:57] [Output] : ★ Alex Harold returns to the engine head in order to get it out
  605. [2019-06-09 01:29:37] [Output] : ★ Alex Harold mooves his impact gun over the first of the eight bolts and loosens it up
  606. [2019-06-09 01:29:50] [Output] : ★ Alex Harold then repeats the process loosening up all the remaining seven bolts
  607. [2019-06-09 01:30:11] [Output] : ★ Alex Harold then puts his both hands on the head's edges and lifts it up from place.
  608. [2019-06-09 01:30:32] [Output] : ★ Alex Harold then walks to the other side where the first engine head is and lets the second one down
  609. [2019-06-09 01:30:58] [Output] : ★ Alex Harold then places his impact gun on the floor as well and then stands up
  610. [2019-06-09 15:28:29] [Output] : ★ Alex Harold makes his way to the left side of the crane,inspecting the crankshaft and the pistons.
  611. [2019-06-09 15:29:09] [Output] : ★ The twelve piston rods would all have two bolts each holding them to the crankshaft. ((Alex Harold))
  612. [2019-06-09 15:29:35] [Output] : ★ Also,the crankshaft would be held in place by five crankshaft bearings held in by two bolts ((Alex Harold))
  613. [2019-06-09 15:29:38] [Output] : ★ ...each ((Alex Harold))
  614. [2019-06-09 15:30:01] [Output] : ★ Alex Harold leans over to the ground and picks up the impact gun in his right hand,returning to the..
  615. [2019-06-09 15:30:03] [Output] : ★ Alex Harold ...crankshaft
  616. [2019-06-09 15:34:35] [Output] : ★ Alex Harold places his left hand on the engine block and sits down on his knees.
  617. [2019-06-09 15:34:55] [Output] : ★ Alex Harold then aims the impact gun over the first two bolts of the piston,loosening them up
  618. [2019-06-09 15:35:20] [Output] : ★ Alex Harold then proceeds further,dettaching all the six pistons on the left side of the engine.
  619. [2019-06-09 15:35:48] [Output] : ★ Alex Harold then slowly places the impact gun on the floor and grabs the first piston bearing sliding it
  620. [2019-06-09 15:36:13] [Output] : ★ Alex Harold then pushes up the piston and it's rod until they reach to the top
  621. [2019-06-09 15:36:27] [Output] : ★ Alex Harold then makes his way to the right side of the engine in order to pull the piston out
  622. [2019-06-09 15:36:51] [Output] : ★ Alex Harold places his hand on the piston and drags it fully out,placing it along with the bearing on ..
  623. [2019-06-09 15:36:53] [Output] : ★ Alex Harold ...the floor
  624. [2019-06-09 15:37:14] [Output] : ★ Alex Harold returns to the left side after and slowly repeats the process again for all the other piston
  625. [2019-06-09 15:37:18] [Output] : Alex Harold: (( pistons* ))
  626. [2019-06-09 15:37:38] [Output] : ★ Alex Harold slides out all the bearings and pushes up the pistons,pulling them out from the other side
  627. [2019-06-09 15:39:08] [Output] : ★ Alex Harold then places the pistons one by one near the first one and heads back to the left side
  628. [2019-06-09 15:39:27] [Output] : ★ Alex Harold notices that all the pistons are out and decides to rotate the engine.
  629. [2019-06-09 15:39:37] [Output] : ★ Alex Harold stands up and makes his way to the back of the stand
  630. [2019-06-09 15:40:02] [Output] : ★ Alex Harold pulls the handle back and then rotates the engine two times to the left,locking it in place.
  631. [2019-06-09 15:40:35] [Output] : ★ Alex Harold then makes his way to the bottom side of the block in order to dettach the rest of the...
  632. [2019-06-09 15:40:38] [Output] : ★ Alex Harold ...pistons
  633. [2019-06-09 15:40:53] [Output] : ★ Alex Harold extends his arm to the opposite side and grabs up his impact gun
  634. [2019-06-09 15:42:03] [Output] : ★ Alex Harold then holds the engine block with his left hand and aims the impact gun over the first two
  635. [2019-06-09 15:42:05] [Output] : ★ Alex Harold ...bolts
  636. [2019-06-09 15:42:26] [Output] : ★ Alex Harold then continues loosening up all the bolts in a row
  637. [2019-06-09 15:43:11] [Output] : ★ Alex Harold places his hand grabbing all of the bearings out and placing them on the ground.
  638. [2019-06-09 15:43:26] [Output] : ★ Alex Harold then pushes each piston up and makes his way to the other side of the engine
  639. [2019-06-09 15:43:45] [Output] : ★ Alex Harold pulls out the six pistons,one by one and allings them down on the floor
  640. [2019-06-09 15:44:28] [Output] : ★ As the twelve pistons are now dettached,the only things holding the crankshaft would be... ((Alex Harold))
  641. [2019-06-09 15:44:36] [Output] : ★ ...the five crankshaft bearings ((Alex Harold))
  642. [2019-06-09 15:44:54] [Output] : ★ Alex Harold aims the impact gun at the first bearing and loosens up it's two bolts.
  643. [2019-06-09 15:45:54] [Output] : ★ Alex Harold then continues loosening the rest of eight bolts of the other bearings,then placing down the
  644. [2019-06-09 15:45:58] [Output] : ★ Alex Harold ...impact gun
  645. [2019-06-09 15:46:16] [Output] : ★ Alex Harold uses his left hand after and slides out all the bearings,stacking them in his left hand
  646. [2019-06-09 15:46:35] [Output] : ★ Alex Harold then puts down the bearings on the ground and heads to the crankshaft.
  647. [2019-06-09 15:46:59] [Output] : ★ Alex Harold grabs the crankshaft with his two hands and slides it back a little,lowering it out of the
  648. [2019-06-09 15:47:03] [Output] : ★ Alex Harold ...engine block
  649. [2019-06-09 15:47:15] [Output] : ★ Alex Harold then pulls the crankshaft to the front,holding it in his hands.
  650. [2019-06-09 15:47:34] [Output] : ★ Alex Harold carefully places the crankshaft on the floor and starts rotating it around to see it
  651. [2019-06-09 15:47:39] [Output] : ★ Alex Harold would notice...
  652. [2019-06-09 15:47:56] [Output] : [English] Alex Harold says: Car has low mileage,might not even worth calibrating...but the forged pistons are...
  653. [2019-06-09 15:47:58] [Output] : [English] Alex Harold says: Hmm...
  654. [2019-06-09 15:49:12] [Output] : ★ Alex Harold thinks about the situation and finally decides to use the mallory due to the new pistons
  655. [2019-06-09 15:49:20] [Output] : [English] Alex Harold says: Right,let's head to the kit
  656. [2019-06-09 15:49:35] [Output] : ★ Alex Harold stands up and then heads to the new turbo kit which has all the parts
  657. [2019-06-09 15:49:52] [Output] : ★ The kit would be places near the wall,just in front of the stand ((Alex Harold))
  658. [2019-06-09 15:50:19] [Output] : ★ Alex Harold looks over the kit which would have the following parts:
  659. [2019-06-09 15:51:40] [Output] : ★ ...a blueprint along with a new calibrated race short block ((Alex Harold))
  660. [2019-06-09 15:52:59] [Output] : ★ ...two torque plates meant to sustain the turbo's pressure ((Alex Harold))
  661. [2019-06-09 15:53:27] [Output] : ★ ... a few mallory pieces meant to balance the crankshaft. ((Alex Harold))
  662. [2019-06-09 15:53:56] [Output] : ★ ...custom billet rods attached to the new reverse dish race pistons. ((Alex Harold))
  663. [2019-06-09 15:54:36] [Output] : ★ ...spiral locks,wrist pins,a new oil rail support,main bearings,rod bearings and a total... ((Alex Harold))
  664. [2019-06-09 15:55:20] [Output] : ★ ...seal TNT file fit rings ((Alex Harold))
  665. [2019-06-09 15:55:26] [Output] : [English] Alex Harold says: Damn this is hot...
  666. [2019-06-09 15:55:53] [Output] : ★ Placed in the left side of the above mentioned components would be the twin turbo kit along ((Alex Harold))
  667. [2019-06-09 15:56:38] [Output] : ★ ...with:wastegates,blow off's,the turbos,new K&N air filters and all the hoses and clamps... ((Alex Harold))
  668. [2019-06-09 15:56:47] [Output] : ★ ...bolts and a new intercooler ((Alex Harold))
  669. [2019-06-09 15:58:51] [Output] : ★ Alex Harold takes up one of the new pistons with it's attached bilet road and positions it sepparately
  670. [2019-06-09 15:59:22] [Output] : ★ Alex Harold then takes four of the TNT seal rings and puts them near the piston
  671. [2019-06-09 15:59:47] [Output] : ★ Alex Harold looks over the new rings and notices that they have numbers written on them
  672. [2019-06-09 15:59:55] [Output] : [English] Alex Harold says: Perfect,newbie level rings.
  673. [2019-06-09 16:00:23] [Output] : ★ Alex Harold grabs up the first rings and inserts it on the top of the piston,lifting it up a bit.
  674. [2019-06-09 16:00:51] [Output] : ★ Alex Harold then slides the ring all the way down to the first gap,locking it there.
  675. [2019-06-09 16:01:16] [Output] : ★ Alex Harold takes up the second ring and pushes it down on the piston's head,dragging it to the second
  676. [2019-06-09 16:01:17] [Output] : ★ Alex Harold ...gap
  677. [2019-06-09 16:01:26] [Output] : ★ Alex Harold then rotates the rings securing it in place
  678. [2019-06-09 16:02:03] [Output] : ★ Alex Harold takes then the third ring up and slides it down on the piston's head,placing it in the third
  679. [2019-06-09 16:02:04] [Output] : ★ Alex Harold ...gap
  680. [2019-06-09 16:02:41] [Output] : ★ Alex Harold finally picks up the fourth piston ring and gets it in place,locking it.
  681. [2019-06-09 16:03:00] [Output] : ★ Alex Harold then makes his way to the bunch of tools and grabs a large oppening plier
  682. [2019-06-09 16:03:12] [Output] : ★ Alex Harold returns to the piston in order to lock down the four rings.
  683. [2019-06-09 16:05:22] [Output] : ★ Alex Harold grabs each one of the rings in order and uses the pliers to tighten the rings around the..
  684. [2019-06-09 16:05:24] [Output] : ★ Alex Harold ...piston
  685. [2019-06-09 16:05:43] [Output] : ★ Alex Harold then lets the pliers down and shakes all of the pistons,checking if there is any shake
  686. [2019-06-09 16:06:11] [Output] : ★ Alex Harold then grabs another piston and rings and repeats the process aligning all the twelve pistons.
  687. [2019-06-09 16:06:23] [Output] : ★ Alex Harold ...along with their freshly installed rings in a row.
  688. [2019-06-09 16:06:41] [Output] : ★ Alex Harold stands up after and makes his way to the old engine in order to dettach the mounts.
  689. [2019-06-09 16:07:59] [Output] : ★ Alex Harold leans over to the ground and picks up the impact gun in his right hand,reaching to the first
  690. [2019-06-09 16:08:05] [Output] : ★ Alex Harold ...engine mount after..
  691. [2019-06-09 16:08:31] [Output] : [English] Alex Harold says: You pay 300 thousands on a kit and i doesn t have engine mounts,hell na
  692. [2019-06-09 16:09:09] [Output] : ★ Alex Harold spots up the two bolts holding the engine mount in place and aims the impact gun over them.
  693. [2019-06-09 16:10:39] [Output] : ★ Alex Harold then dettaches the bolts out of the engine block and takes up the mount with it's bolts...
  694. [2019-06-09 16:10:43] [Output] : ★ Alex Harold ...heading to the new block
  695. [2019-06-09 16:11:08] [Output] : ★ Alex Harold positions his self on the left side of the block,placing the mounts in the front gap
  696. [2019-06-09 16:11:26] [Output] : ★ Alex Harold then uses the impact gun and tightens down the two bolts into the new engine block
  697. [2019-06-09 16:11:28] [Output] : [English] Alex Harold says: Perfect
  698. [2019-06-09 16:11:41] [Output] : ★ Alex Harold stands up and returns to the old block after
  699. [2019-06-09 16:12:06] [Output] : ★ Alex Harold mooves to the back mount,loosening up it's two bolts
  700. [2019-06-09 16:12:38] [Output] : ★ Alex Harold slides up the mount and makes his way to the new block with it in his left hand
  701. [2019-06-09 16:13:28] [Output] : ★ Alex Harold alligns the mount over the holes and uses the impact gun to tighten down both lugnuts
  702. [2019-06-09 16:13:40] [Output] : ★ Alex Harold then returns to the back of the engine stand in order to rotate it
  703. [2019-06-09 16:14:19] [Output] : ★ Alex Harold pulls back the stand's lever and rotates it back to the right,placing it as normal.
  704. [2019-06-09 16:19:39] [Output] : ★ Alex Harold then makes his way to the left side of the engine block in order to dettach the rest of two.
  705. [2019-06-09 16:19:43] [Output] : ★ Alex Harold ...mounts
  706. [2019-06-09 16:20:23] [Output] : ★ Alex Harold uses his impact gun and loosens up the four bolts,sliding them out of place.t
  707. [2019-06-09 16:20:36] [Output] : ★ Alex Harold then grabs them both and makes his way to the new engine block
  708. [2019-06-09 16:21:14] [Output] : ★ Alex Harold positions the two mounts in place and uses his impact gun to tighten down the four bolts.
  709. [2019-06-09 16:21:37] [Output] : [English] Alex Harold says: Perfect,have to drill that crankshaft,let's have a look on the blueprint.
  710. [2019-06-09 16:21:53] [Output] : ★ Alex Harold places the impact gun down and takes the blueprint over.
  711. [2019-06-09 16:22:18] [Output] : ★ In the bottom side of the paper there would be a crankshaft scheme with the points that need ((Alex Harold))
  712. [2019-06-09 16:22:25] [Output] : ★ ...mallory inserted. ((Alex Harold))
  713. [2019-06-09 16:22:51] [Output] : ★ There would be four holes needing to be drill at the back and front of the crankshaft. ((Alex Harold))
  714. [2019-06-09 16:22:59] [Output] : [English] Alex Harold says: Perfect as hell.
  715. [2019-06-09 16:23:20] [Output] : ★ Alex Harold makes his way to the bunch of tools and picks up his driller alongs with some drill bits.
  716. [2019-06-09 16:23:36] [Output] : ★ Alex Harold then returns to the crankshaft in order to drill up the holes for the mallory bits
  717. [2019-06-09 16:23:59] [Output] : ★ Alex Harold inserts a small drill bit first and places down the driller
  718. [2019-06-09 16:24:23] [Output] : ★ Alex Harold then grabs the crankshaft and positions it vertically following the blueprint instructions
  719. [2019-06-09 16:25:01] [Output] : ★ Alex Harold then takes up the drill bits and spots the places that need to be driller
  720. [2019-06-09 16:25:09] [Output] : Alex Harold: (( drilled* ))
  721. [2019-06-09 16:25:29] [Output] : ★ Alex Harold positions the drill bit over the first place and start drilling into the metal.
  722. [2019-06-09 16:25:47] [Output] : ★ Alex Harold makes up and down mooves dragging the driller out after.
  723. [2019-06-09 16:26:11] [Output] : ★ Alex Harold then mooves up an inch to the right and starts drilling the second hole as the blueprint ...
  724. [2019-06-09 16:26:14] [Output] : ★ Alex Harold ...indicates
  725. [2019-06-09 16:27:54] [Output] : ★ Alex Harold makes up and down motions pulling the driller out after a few mooves
  726. [2019-06-09 16:29:08] [Output] : ★ Alex Harold rotates the crankshaft to the other side after and then starts to drill the rest of two..
  727. [2019-06-09 16:29:33] [Output] : ★ Alex Harold ...holes as the blueprint indicates
  728. [2019-06-09 16:29:59] [Output] : ★ Alex Harold then puts the driller down and switches the drill bit to the bigger one
  729. [2019-06-09 16:30:15] [Output] : ★ Alex Harold then starts drilling again in the fourth holes,widening them for the mallory to fit.
  730. [2019-06-09 16:30:33] [Output] : ★ Alex Harold then lets the crankshaft down and the driller as well.
  731. [2019-06-09 16:31:02] [Output] : ★ Alex Harold picks up one of the metal pieces and places it over one of the holes
  732. [2019-06-09 16:31:15] [Output] : ★ The piece would fit but would need to get hammered to get in. ((Alex Harold))
  733. [2019-06-09 16:31:59] [Output] : ★ Alex Harold makes his way to the tools,returning with a medium sized hammer in his right hand
  734. [2019-06-09 16:32:16] [Output] : ★ Alex Harold places the metal bit over the hole and apllies medium pressure,hammering it in the hole
  735. [2019-06-09 16:32:48] [Output] : ★ As the metal bit gets into the hole,Alex makes his way and hammers in the rest of three... ((Alex Harold))
  736. [2019-06-09 16:33:01] [Output] : ★ ...mallory pieces in the holes ((Alex Harold))
  737. [2019-06-09 16:33:06] [Output] : [English] Alex Harold says: Good.
  738. [2019-06-09 16:33:15] [Output] : [English] Alex Harold says: I have to take the old block out later....
  739. [2019-06-09 19:01:50] [Output] : ★ Alex Harold makes his way to the towtruck,oppening the driver's door
  740. [2019-06-09 19:02:05] [Output] : * Alex Harold presses on the key to unlock the vehicle. ((2013 RAM 5500 Tow Truck)) *
  741. [2019-06-09 19:02:16] [Output] : ★ Alex Harold starts up the towtruck and backs up to the engine stand
  742. [2019-06-09 19:03:03] [Output] : ★ Alex Harold then steps out and makes his way to the back of the hook
  743. [2019-06-09 19:03:29] [Output] : ★ Alex Harold grabs one of the straps from the truck's bed and goes to the old engine block.
  744. [2019-06-09 19:03:53] [Output] : ★ Alex Harold throws the strap over the middle of the engine and then sits down on his knees.
  745. [2019-06-09 19:04:28] [Output] : ★ Alex Harold then inserts the strap into the clicket and tightens it down all the way.
  746. [2019-06-09 19:04:52] [Output] : ★ Alex Harold pulls back the hook to him,holding the engine in it.
  747. [2019-06-09 19:05:07] [Output] : ★ Alex Harold picks up the impact gun and then mooves to the back of the engine stand
  748. [2019-06-09 19:05:46] [Output] : ★ Alex Harold then aims the eight bolts holding the engine bolts to the stand and starts untightening them
  749. [2019-06-09 19:06:03] [Output] : ★ As Alex is remooving the bolts,the engine mooves an inch to the front. ((Alex Harold))
  750. [2019-06-09 19:06:21] [Output] : ★ Alex Harold finishes dettaching the bolts and places them down at the bottom of the stand
  751. [2019-06-09 19:06:36] [Output] : ★ Alex Harold then steps into the towtruck again in order to get it out
  752. [2019-06-09 19:07:20] [Output] : ★ Alex Harold slowly drives forward,getting the towtruck backed up near the blue car
  753. [2019-06-09 19:08:37] [Output] : ★ Alex Harold grabs the remote from the dash and uses it's bottom button to lower down the hook
  754. [2019-06-09 19:09:00] [Output] : ★ As the old block touches the ground,Alex drives forward letting the engine free ((Alex Harold))
  755. [2019-06-09 19:09:15] [Output] : ★ Alex Harold then drives over to the new engine block in order to pick it up
  756. [2019-06-09 19:09:37] [Output] : ★ Alex Harold steps out of the towtruck and mooves to the back of it
  757. [2019-06-09 19:10:03] [Output] : ★ Alex Harold grabs the second strap from the truck's bed and makes his way to the new engine block.
  758. [2019-06-09 19:10:32] [Output] : ★ Alex Harold throws the strap around the new engine block and tightens it down
  759. [2019-06-09 19:10:51] [Output] : ★ Alex Harold then grabs the hook up and attaches it to the strap returning into the truck
  760. [2019-06-09 19:11:13] [Output] : ★ Alex Harold grabs the remote and uses it to lift up the new engine
  761. [2019-06-09 19:11:31] [Output] : ★ Alex Harold then slowly drives backwards to the engine stand to place the engine on it.
  762. [2019-06-09 19:33:09] [Output] : ★ Alex Harold uses the remote and lowers down the hook enough to make the engine sit on the stand.
  763. [2019-06-09 19:33:29] [Output] : ★ Alex Harold then bacwards a few more inches,placing the engine on the stand
  764. [2019-06-09 19:34:31] [Output] : ★ Alex Harold pulls up the stand's foot brake with the left foot and mooves it behind the engine
  765. [2019-06-09 19:34:57] [Output] : ★ Alex Harold then leans out on the floor and picks up the eight bolts
  766. [2019-06-09 19:36:04] [Output] : ★ Alex Harold then positions the engine properly to the stand and twists the eight bolts in the ...
  767. [2019-06-09 19:36:11] [Output] : ★ Alex Harold ...transmission bolts
  768. [2019-06-09 19:37:44] [Output] : ★ Alex Harold then starts up the impact gun and tightens the bolts into the engine block in a cross...
  769. [2019-06-09 19:37:47] [Output] : ★ Alex Harold ...pattern
  770. [2019-06-09 19:37:57] [Output] : ★ Alex Harold then pulls the hook down,letting the strap frre.
  771. [2019-06-09 19:38:00] [Output] : Alex Harold: (( free* ))
  772. [2019-06-09 19:38:19] [Output] : ★ Alex Harold sits down on his knees and then picks the strap's clicket
  773. [2019-06-09 19:38:47] [Output] : ★ Alex Harold uses the clicket and untightens the strap,dragging it to him
  774. [2019-06-09 19:39:18] [Output] : ★ Alex Harold then stands up and throws the strap into the truck's bed
  775. [2019-06-09 19:39:41] [Output] : ★ Alex Harold steps inside the towtruck after and mooves it away from the workplace
  776. [2019-06-09 19:40:46] [Output] : ★ Alex Harold heads to the engine kit placed near the wall and grabs up the crankshaft
  777. [2019-06-09 19:41:07] [Output] : ★ Alex Harold then makes his way to the new engine after with the crankshaft in his left hand
  778. [2019-06-09 19:41:36] [Output] : ★ Alex Harold puts the cranskhaft down on the floor and makes his way to the back of the stand
  779. [2019-06-09 19:42:10] [Output] : ★ Alex Harold pulls the stand's handle back and then rotates the engine to the right side
  780. [2019-06-09 19:42:22] [Output] : ★ Alex Harold then heads to the crankshaft and picks it up
  781. [2019-06-09 19:42:42] [Output] : ★ Alex Harold grabs the crankshaft into his both hands and then sits down on his knees at the bottom side
  782. [2019-06-09 19:42:46] [Output] : ★ Alex Harold ...of the engine
  783. [2019-06-09 19:43:32] [Output] : ★ Alex Harold slides the back of the crankshaft in the back hole of the engine and lifts it up a bit
  784. [2019-06-09 19:45:06] [Output] : ★ Alex Harold would then slide the wheel into the front hole,positioning it over the places of the bearing
  785. [2019-06-09 19:45:35] [Output] : ★ Alex Harold then picks up two of the bearings heading to their holes.
  786. [2019-06-09 19:46:30] [Output] : ★ Alex Harold slides the first bearing over the front holes and hand tigthens the two bolts.
  787. [2019-06-09 19:46:50] [Output] : ★ Alex Harold then places the second bearing over the back holes as well,hand tightening the bolts.
  788. [2019-06-09 19:47:12] [Output] : ★ Alex Harold then picks the impact gun up and makes his way to the front bearing
  789. [2019-06-09 19:47:46] [Output] : ★ Alex Harold starts up the impact gun and uses it to tighten down the two bolts holding the bearing in
  790. [2019-06-09 19:48:03] [Output] : ★ Alex Harold then mooves the impact gun to the back bearing,tightening down it's bolts as well
  791. [2019-06-09 19:48:33] [Output] : ★ Alex Harold would then grab the last of three bearings and tightens them down in place repeating the...
  792. [2019-06-09 19:48:37] [Output] : ★ Alex Harold ...previous process
  793. [2019-06-09 19:49:03] [Output] : ★ As the crankshaft is now attached to the engine block,the new pistons can be assembled. ((Alex Harold))
  794. [2019-06-09 19:49:50] [Output] : ★ Alex Harold grabs the crankshaft pulley with it's attached bolt firstly and places it on the front of..
  795. [2019-06-09 19:50:40] [Output] : ★ Alex Harold ...the crankshaft .
  796. [2019-06-09 19:50:56] [Output] : ★ Alex Harold then mooves the impact gun to the pulley's bolt and tightens it down to max torque
  797. [2019-06-09 19:51:16] [Output] : ★ As the bolt in tightened,the pulley would spin a few times ((Alex Harold))
  798. [2019-06-09 19:52:15] [Output] : ★ Alex Harold then mooves to the new pistons in order to pick them up.
  799. [2019-06-09 19:52:38] [Output] : ★ Alex Harold grabs six of the pistons up and their bearings,mooving to the engine
  800. [2019-06-09 19:52:59] [Output] : ★ Alex Harold puts the bearings and the pistons down,only keeping a piston in his left hand
  801. [2019-06-09 19:53:36] [Output] : ★ Alex Harold positions the piston on the first hole of engine's right side and pushes it in.
  802. [2019-06-09 19:53:53] [Output] : ★ As the piston hits the crankshaft,Alex picks up another one. ((Alex Harold))
  803. [2019-06-09 19:54:20] [Output] : ★ Alex Harold alligns the second piston over the hole and pushes it in until it hits the crankshaft.
  804. [2019-06-09 19:54:41] [Output] : ★ Alex Harold would then grab the remaining four pistons and position each over their hole,pushing them in
  805. [2019-06-09 19:55:02] [Output] : ★ Alex Harold then grabs the six piston bearings and makes his way to the bottom side of the engine
  806. [2019-06-09 19:55:39] [Output] : ★ Alex Harold slides the bearings one by one ,on each piston and hand tightens their bolts as h places
  807. [2019-06-09 19:55:40] [Output] : ★ Alex Harold ...them
  808. [2019-06-09 19:56:04] [Output] : ★ Alex Harold then grabs up the impact gun and starts it up,tightening the twelve bolts of the piston...
  809. [2019-06-09 19:56:11] [Output] : ★ Alex Harold ...bearings in a cross pattern.
  810. [2019-06-09 19:56:31] [Output] : ★ Alex Harold then moves himself to the back of the engine stand in order to rotate it
  811. [2019-06-09 19:56:51] [Output] : ★ Alex Harold pulls the stand's lever back unlocking it and rotates it two times to the left
  812. [2019-06-09 20:07:46] [Output] : ★ Alex Harold then heads up back to the engine set
  813. [2019-06-09 20:08:12] [Output] : ★ Alex Harold picks up the last six pistons and their bearings,returning to the engine block
  814. [2019-06-09 20:08:50] [Output] : ★ Alex Harold sits down on his knees and allings down the pistons and bearings,keeping on in hand.
  815. [2019-06-09 20:09:14] [Output] : ★ Alex Harold puts the piston over one of the holes and slowlyy pushes it in until it hits the crankshaft.
  816. [2019-06-09 20:09:38] [Output] : ★ Alex Harold then picks up another one and positions it over the hole,pushing it in then
  817. [2019-06-09 20:09:52] [Output] : ★ Alex Harold would continue pushing in the rest of the four pistons
  818. [2019-06-09 20:10:17] [Output] : ★ Alex Harold picks up the six bearings and makes his way to the back side of the engine
  819. [2019-06-09 20:10:59] [Output] : ★ Alex Harold inserts the bearings one by on each of the pistons and hand tightens the twelve bolts.
  820. [2019-06-09 20:11:20] [Output] : ★ Alex Harold then grabs up the impact gun and starts tightening down the bolts in a cross pattern.
  821. [2019-06-09 20:12:13] [Output] : ★ Alex Harold stands up after and makes his way into the garage where the Subaru is stored
  822. [2019-06-09 20:12:49] [Output] : ★ Alex Harold picks up the oilpan from the right side of the car and holds it in his hands
  823. [2019-06-09 20:13:01] [Output] : ★ Alex Harold then returns to the new engine in order to attach the pan
  824. [2019-06-09 20:15:13] [Output] : ★ Alex Harold puts the pan down as he is going on his knees
  825. [2019-06-09 20:15:29] [Output] : ★ Alex Harold then grabs the pan and positions it over the bolt's holes,hand tightening them
  826. [2019-06-09 20:17:28] [Output] : ★ Alex Harold then uses his impact gun and tightens the four bolts holding the pan in a star pattern
  827. [2019-06-09 20:17:43] [Output] : ★ Alex Harold then makes his way to the oil pump and picks it up
  828. [2019-06-09 20:17:59] [Output] : ★ Alex Harold then heads to the front of the engine in order to place the pump in place
  829. [2019-06-09 20:18:06] [Output] : Alex Harold: (( that sounds nooby ))
  830. [2019-06-09 20:18:34] [Output] : ★ Alex Harold allings the oil pump over it's holes and unpockets it's bolts,hand tightening them
  831. [2019-06-09 20:19:24] [Output] : ★ As the old engine had low mileage,the oil pump's gasket would still be intact and sticked to ((Alex Harold))
  832. [2019-06-09 20:19:27] [Output] : ★ ..the pump ((Alex Harold))
  833. [2019-06-09 20:19:52] [Output] : ★ Alex Harold grabs the impact gun and uses it to tighten down the two bolts back into their holes
  834. [2019-06-09 20:20:08] [Output] : ★ Alex Harold places down the tool after and makes his way to the back of the engine
  835. [2019-06-09 20:20:29] [Output] : ★ Alex Harold pulls the handle back a bit unlocking it from it's position
  836. [2019-06-09 20:20:41] [Output] : ★ Alex Harold then rotates the stand making the engine sit vertical
  837. [2019-06-09 20:21:01] [Output] : ★ Alex Harold uses his left foot pushing on the foot brake
  838. [2019-06-09 20:21:10] [Output] : [English] Alex Harold says: Gosh,the engine coul've hit the wall...
  839. [2019-06-09 20:21:15] [Output] : [English] Alex Harold says: That's good luck indeed
  840. [2019-06-09 20:21:41] [Output] : ★ Alex Harold then makes his way to the old engine in order to pick up the headgaskets
  841. [2019-06-09 20:22:11] [Output] : ★ Alex Harold makes his way over the top of the engine and slides up the two gaskets,returning to the new
  842. [2019-06-09 20:22:13] [Output] : ★ Alex Harold ...engine
  843. [2019-06-09 20:22:48] [Output] : ★ Alex Harold places the two gaskets on the engine head's places and then mooves to the engine kit to pick
  844. [2019-06-09 20:22:54] [Output] : ★ Alex Harold ...up the torque plates
  845. [2019-06-09 20:23:15] [Output] : ★ Alex Harold grabs both plates with his two hands and returns to the engine after
  846. [2019-06-09 20:23:41] [Output] : ★ Alex Harold places one of the torque plates down and grabs the other one in his both hands.
  847. [2019-06-09 20:23:52] [Output] : ★ Alex Harold then positions it over the gasket,aligning it .
  848. [2019-06-09 20:24:32] [Output] : ★ The torque plate would've already have a top gasket and four long bolts to attach it to the ((Alex Harold))
  849. [2019-06-09 20:24:35] [Output] : ★ ...block ((Alex Harold))
  850. [2019-06-09 20:27:41] [Output] : ★ Alex Harold then twists the plate's bolts into the engine block and grabs up the impact gun
  851. [2019-06-09 20:27:55] [Output] : ★ Alex Harold uses the impact gun after to tighten down all the four bolts to max
  852. [2019-06-09 20:28:19] [Output] : ★ Alex Harold then makes his way to the other side of the stand in order to pick up the left engine head
  853. [2019-06-09 20:28:39] [Output] : ★ Alex Harold puts the impact gun down and grabs up the head with his both hands
  854. [2019-06-09 20:28:54] [Output] : ★ Alex Harold would then return to the left side of the engine in order to position the head
  855. [2019-06-09 20:30:24] [Output] : ★ Alex Harold allings the head over the torque plate and hand tightens it's bolts into the engine
  856. [2019-06-09 20:30:43] [Output] : ★ Alex Harold then leans over the impact gun and picks it up returning to the top of the head
  857. [2019-06-09 20:32:30] [Output] : ★ Alex Harold starts up the impact gun and uses it to fully tighten down the eight bolts
  858. [2019-06-09 20:32:58] [Output] : ★ Alex Harold leans over the second torque plate and picks it up in his left hand,heading to the opposite
  859. [2019-06-09 20:33:00] [Output] : ★ Alex Harold ...side of the engine
  860. [2019-06-09 20:35:45] [Output] : ★ Alex Harold lets the impact gun down and picks up the plate in his both hands
  861. [2019-06-09 20:37:29] [Output] : ★ Alex Harold positions the plate over the gasket after and aliigns it.
  862. [2019-06-09 20:37:53] [Output] : ★ As the plate is alligned,it's four bolt fall straight into the engine block's ((Alex Harold))
  863. [2019-06-09 20:38:11] [Output] : ★ Alex Harold picks up the impact gun and uses it to tighten the four bolts to max from front to back
  864. [2019-06-09 20:38:46] [Output] : ★ Alex Harold then lets down the impact gun one more time and grabs the second engine head with his both
  865. [2019-06-09 20:38:48] [Output] : ★ Alex Harold ...hands
  866. [2019-06-09 20:39:21] [Output] : ★ Alex Harold alligns the head over the torque plate's gasket
  867. [2019-06-09 20:39:41] [Output] : ★ As the engine head is alligned,it's eight bolts would fall into the plate,being able to be.. ((Alex Harold))
  868. [2019-06-09 20:39:47] [Output] : ★ ...torqued down ((Alex Harold))
  869. [2019-06-09 20:40:02] [Output] : ★ Alex Harold grabs the impact gun up and uses it to tighten all the eight bolts in a cross pattern
  870. [2019-06-09 20:40:24] [Output] : ★ Alex Harold then leaves the impact gun stay on the floor and goes down picking up two of the camshafts.
  871. [2019-06-09 20:40:45] [Output] : ★ Alex Harold picks up he right side camshafts and stands back up to the head
  872. [2019-06-09 20:41:26] [Output] : ★ Alex Harold positions the two camshafts in their place and then heads back down to pick up the bearings
  873. [2019-06-09 20:41:45] [Output] : ★ Alex Harold takes up all the 10 bearings in his left hand and returns back up
  874. [2019-06-09 20:42:17] [Output] : ★ Alex Harold places the bearings over the two camshaft,positioning them to make the bolts stick in the...
  875. [2019-06-09 20:42:19] [Output] : ★ Alex Harold ...holes
  876. [2019-06-09 20:43:51] [Output] : ★ As all the ten bearings would now be positioned,their bolts could be tightened down ((Alex Harold))
  877. [2019-06-09 20:44:01] [Output] : ★ Alex Harold leans over and picks up the impact gun,heading back to the top.
  878. [2019-06-09 20:44:21] [Output] : ★ Alex Harold starts up the impact gun and uses it to tighten down all the twenty bolts in a cross pattern
  879. [2019-06-09 20:44:35] [Output] : ★ Alex Harold then picks up two of the camgears and makes his way to the front of the engine
  880. [2019-06-09 20:45:09] [Output] : ★ Alex Harold slides the gears on the camshaft's bars and uses the bottom of the impact gun to hit them in
  881. [2019-06-09 20:45:12] [Output] : ★ Alex Harold ...place
  882. [2019-06-09 20:45:54] [Output] : ★ Alex Harold then heads over to the other two camshafts in order to pick them
  883. [2019-06-09 20:46:08] [Output] : ★ Alex Harold picks up the two shafts from the ground and makes his way to the left side of the engine
  884. [2019-06-09 20:47:27] [Output] : ★ Alex Harold positions the two camshafts in their desired place and returns to the pile of parts
  885. [2019-06-09 20:47:47] [Output] : ★ Alex Harold picks up the remaining ten bearings and returns to the camshaft
  886. [2019-06-09 20:48:24] [Output] : ★ Alex Harold places the bearings over the camshafts in order to fit in the holes.
  887. [2019-06-09 20:48:35] [Output] : ★ Alex Harold then alligns the bearings making the bolts fall in place.
  888. [2019-06-09 20:48:56] [Output] : ★ Alex Harold then extends his arm under the stand and picks up the impact gun from the opposite side
  889. [2019-06-09 20:49:19] [Output] : ★ Alex Harold then returns back up to the two camshafts in order to tighten down their bolts
  890. [2019-06-09 20:49:36] [Output] : ★ Alex Harold starts up the impact gun and tightens all the twenty bolts in a criss cross pattern
  891. [2019-06-09 20:50:05] [Output] : ★ Alex Harold then makes his way back to the parts in order to pick up the two remaining gear
  892. [2019-06-09 20:50:08] [Output] : Alex Harold: (( gears* ))
  893. [2019-06-09 20:50:45] [Output] : ★ Alex Harold takes both gears up in his left hand along with the two timing belts
  894. [2019-06-09 20:51:29] [Output] : ★ Alex Harold stands down at the front of the engine and lets the two belts down
  895. [2019-06-09 20:51:45] [Output] : ★ Alex Harold then places back the two camgears and uses the impact gun to hit them back in place
  896. [2019-06-09 20:52:00] [Output] : ★ Alex Harold then picks the left belt and positions it's top side over the camgears
  897. [2019-06-09 20:52:25] [Output] : ★ Alex Harold then drags the belt down adding pressure to it and gets it over the crankshaft pulley
  898. [2019-06-09 20:52:43] [Output] : ★ Alex Harold takes up the second belt and puts it's top part over the two camshafts
  899. [2019-06-09 20:53:27] [Output] : ★ Alex Harold then drags it down as well and places it over the crankshaft pulley
  900. [2019-06-09 20:53:44] [Output] : ★ Alex Harold slowly gets the two belt alligned after making room for the oil pump's
  901. [2019-06-09 20:54:05] [Output] : ★ Alex Harold goes over to the pile of parts again and grabs the bottom belt of the oilpump
  902. [2019-06-09 20:54:25] [Output] : ★ Alex Harold then returns on the front of the engine in order to place the bolt
  903. [2019-06-09 20:54:51] [Output] : ★ Alex Harold puts the belt over the crankshaft pulley and extends it down with all his force to get it on
  904. [2019-06-09 20:54:57] [Output] : ★ Alex Harold ...the oil pump pulley
  905. [2019-06-09 20:55:09] [Output] : ★ Alex Harold then slowly pushes the belt back aligning it
  906. [2019-06-09 20:55:24] [Output] : ★ As the timing is now completed,the timing cover can be attached ((Alex Harold))
  907. [2019-06-09 20:55:47] [Output] : ★ Alex Harold makes his way to the stack of parts and grabs up the timing cover
  908. [2019-06-09 20:56:23] [Output] : ★ Alex Harold then walks to the front of the engine again
  909. [2019-06-09 20:56:45] [Output] : ★ Alex Harold places the timing cover with his both hands over the timing components,aligning it over the
  910. [2019-06-09 20:56:46] [Output] : ★ Alex Harold ...holes
  911. [2019-06-09 20:57:12] [Output] : ★ Alex Harold then unpockets it's bolts and screws them back in with his right hand while he is holding ..
  912. [2019-06-09 20:57:15] [Output] : ★ Alex Harold ...the cover
  913. [2019-06-09 20:57:52] [Output] : ★ Alex Harold then picks the impact gun and tightens down the bolts in a criss cross pattern
  914. [2019-06-09 20:58:02] [Output] : [English] Alex Harold says: Good,cover is on the timing
  915. [2019-06-09 20:58:19] [Output] : [English] Alex Harold says: Gonna resume this later,I need to go for a ride...
  916. [2019-06-09 23:29:33] [Output] : ★ Alex Harold heads over to the right side of the engine in order to get one of the head covers
  917. [2019-06-09 23:30:39] [Output] : ★ Alex Harold leans over the parts and gets the right side engine cover
  918. [2019-06-09 23:30:53] [Output] : ★ Alex Harold then goes back to the engine in order to place the cover
  919. [2019-06-09 23:31:18] [Output] : ★ Alex Harold puts the head cover on the engine head,positioning the bolts hubs over the holes
  920. [2019-06-09 23:31:41] [Output] : ★ Alex Harold then unpockets all the twelve bolts of the cover from his back pocket and starts placing ..
  921. [2019-06-09 23:31:48] [Output] : ★ Alex Harold ...them in all the holes
  922. [2019-06-09 23:32:11] [Output] : ★ Alex Harold then uses his left hand and twists all the bolts in place,shaking the cover with his right..
  923. [2019-06-09 23:32:14] [Output] : ★ Alex Harold ..hand
  924. [2019-06-09 23:33:11] [Output] : ★ As the cover is bolted in by all the lugnuts,Alex would be further able to tighten the ... ((Alex Harold))
  925. [2019-06-09 23:33:16] [Output] : ★ ...bolts down ((Alex Harold))
  926. [2019-06-09 23:33:28] [Output] : ★ Alex Harold leans over to the floor then and picks up the impact gun in his right hand.
  927. [2019-06-09 23:34:11] [Output] : ★ Alex Harold then heads back to the top and starts up the impact gun,tightening the bolts in a cross...
  928. [2019-06-09 23:34:13] [Output] : ★ Alex Harold ...pattern
  929. [2019-06-09 23:34:31] [Output] : ★ Alex Harold then goes back to the rest of the parts in order to pick up the left head cover
  930. [2019-06-09 23:35:14] [Output] : ★ Alex Harold leans over to the ground and picks up the left head cover,returning to the left head
  931. [2019-06-09 23:36:21] [Output] : ★ Alex Harold places the cover up on the head and positions it up over the holes
  932. [2019-06-09 23:36:36] [Output] : ★ Alex Harold then unpockets the rest of twelve bolts and hand twists them into the holes
  933. [2019-06-09 23:36:52] [Output] : ★ Alex Harold then uses the impact gun and tightens down all the bolts in a criss cross pattern
  934. [2019-06-09 23:39:07] [Output] : ★ Alex Harold then makes his way back to the pile of parts and searches the rollers
  935. [2019-06-09 23:39:19] [Output] : ★ Alex Harold takes the rollers up and makes his way to the front side of the engine.
  936. [2019-06-09 23:40:02] [Output] : ★ Alex Harold places all the five idle rollers in place and uses his left hand to twist the bolts in the..
  937. [2019-06-09 23:40:08] [Output] : ★ Alex Harold ...cover's holes
  938. [2019-06-09 23:40:28] [Output] : ★ Alex Harold then uses his impact gun and fully tightens each of the bolts to the max torque
  939. [2019-06-09 23:43:26] [Output] : ★ Alex Harold makes his way to the towtruck in order to pick it up.
  940. [2019-06-09 23:43:38] [Output] : * Alex Harold presses on the key to lock the vehicle. ((2013 RAM 5500 Tow Truck)) *
  941. [2019-06-09 23:43:41] [Output] : * Alex Harold presses on the key to unlock the vehicle. ((2013 RAM 5500 Tow Truck)) *
  942. [2019-06-09 23:43:52] [Output] : ★ Alex Harold opens the truck's door and enters it
  943. [2019-06-09 23:44:04] [Output] : ★ Alex Harold starts up the towtruck and drives backwards to the new engine
  944. [2019-06-09 23:45:42] [Output] : ★ Alex Harold stops the engine and then steps out of the truck,going to the back of the hook
  945. [2019-06-09 23:46:04] [Output] : ★ Alex Harold takes up one of the straps and makes his way to the new engine
  946. [2019-06-09 23:46:30] [Output] : ★ Alex Harold throws the strap around the engine,getting it down.
  947. [2019-06-09 23:47:02] [Output] : ★ Alex Harold then sits down and extends his arm picking up the corner of the strap,pulling it to the ...t
  948. [2019-06-09 23:47:04] [Output] : ★ Alex Harold ...clicket
  949. [2019-06-09 23:47:40] [Output] : ★ Alex Harold slides the strap into the clicket and makes up and down movements to tighten down the strap
  950. [2019-06-09 23:47:59] [Output] : ★ Alex Harold stands up after and drags the hook under the top of the strap
  951. [2019-06-09 23:48:33] [Output] : ★ Alex Harold picks up the impact gun and makes his way to the back of the engine stand
  952. [2019-06-09 23:49:36] [Output] : ★ Alex Harold starts up the imapact gun and starts dettaching the eight bolts that hold the engine block
  953. [2019-06-09 23:49:49] [Output] : ★ Alex Harold then slides out the bolts and lets them sit down on the back of the stand.
  954. [2019-06-09 23:50:22] [Output] : ★ As the engine is now dettached,Alex mooves back into the towtruk ((Alex Harold))
  955. [2019-06-09 23:50:26] [Output] : Alex Harold: (( towtruck* ))
  956. [2019-06-09 23:53:57] [Output] : ★ Alex Harold mooves the towtruck slowly to the garage in order to fit the engine in the bay
  957. [2019-06-09 23:54:41] [Output] : ★ Alex Harold positions the truck at the garage's entrance and slowly drives the truck back over the...
  958. [2019-06-09 23:54:44] [Output] : ★ Alex Harold ...engine bay
  959. [2019-06-09 23:55:38] [Output] : ★ Alex Harold uses the remote and lowers down the hook until the engine hits the chassis
  960. [2019-06-09 23:55:53] [Output] : ★ Alex Harold steps out of the towtruck after and makes his way to the engine
  961. [2019-06-09 23:56:31] [Output] : ★ Alex Harold pushes the engine hard with all his force positioning it to fit the holes.
  962. [2019-06-09 23:56:40] [Output] : ★ Alex Harold then heads back to the stand in order to pick up the impact gun
  963. [2019-06-09 23:57:06] [Output] : ★ Alex Harold leans over to the stand and picks up the impact gun placed near it
  964. [2019-06-09 23:57:39] [Output] : ★ Alex Harold returns to the engine after in order to tighten down the mounts in place.
  965. [2019-06-09 23:58:46] [Output] : ★ Alex Harold leans over to the left side of the engine to reach the engine mounts
  966. [2019-06-09 23:59:04] [Output] : ★ Alex Harold then unpockets the mounts' bolts and inserts them into the holes
  967. [2019-06-09 23:59:51] [Output] : ★ Alex Harold uses the impact gun after and tightens down the two bolts holding the engine on the left
  968. [2019-06-10 00:01:06] [Output] : ★ Alex Harold then makes his way to the right side leaning over the rear fender to reach the mounts
  969. [2019-06-10 00:02:15] [Output] : ★ Alex Harold unpockets the other two bolts and twists them in the mount's middle
  970. [2019-06-10 00:02:38] [Output] : ★ Alex Harold then uses the impact gun and tightens down the two bolts of the both mounts,getting the tool
  971. [2019-06-10 00:02:43] [Output] : ★ Alex Harold ...out and placing it down
  972. [2019-06-10 00:02:55] [Output] : ★ Alex Harold goes under the car after and unties the clicket
  973. [2019-06-10 00:03:34] [Output] : ★ Alex Harold then slides the strap out and stands up throwing it into the truck's bed.
  974. [2019-06-10 00:03:53] [Output] : ★ Alex Harold then makes his way into the truck and mooves it up
  975. [2019-06-10 00:07:27] [Output] : ★ Outside the garage on the left side,there would be the transmision sitting on the mobile jac ((Alex Harold))
  976. [2019-06-10 00:07:30] [Output] : Alex Harold: (( jack* ))
  977. [2019-06-10 00:07:55] [Output] : ★ Alex Harold grabs the jack and mooves it to the back of the car in order to reattach it
  978. [2019-06-10 00:08:35] [Output] : ★ Alex Harold uses the elevator's control panel and mooves up the elevator.
  979. [2019-06-10 00:09:07] [Output] : ★ Alex Harold then makes his way to the left side of the car in order to get up the clutch parts.
  980. [2019-06-10 00:09:37] [Output] : ★ Alex Harold gets under the car
  981. [2019-06-10 00:09:58] [Output] : ★ Alex Harold picks up the flywheel and slides it on the back of the crankshaft
  982. [2019-06-10 00:10:28] [Output] : ★ Alex Harold holds
  983. [2019-06-10 00:11:15] [Output] : ★ Alex Harold holds up the flywheel with his left hand and grabs out the six bolts of the flywheel
  984. [2019-06-10 00:11:29] [Output] : ★ Alex Harold then twists the six bolts in the holes one by one.
  985. [2019-06-10 00:11:48] [Output] : ★ Alex Harold uses his impact gun after and tightens down the six bolts in a star pattern
  986. [2019-06-10 00:12:13] [Output] : ★ Alex Harold would then go down and pick up the clutch plate and the middle bearing held in by the wrench
  987. [2019-06-10 00:14:18] [Output] : ★ Alex Harold places the clutch plate on the flywheel and slides the bearing with it's wrench in the....
  988. [2019-06-10 00:14:21] [Output] : ★ Alex Harold ...midle
  989. [2019-06-10 00:15:15] [Output] : ★ Alex Harold then turns the wrench's lever to the left in order to let the bearing free.
  990. [2019-06-10 00:15:56] [Output] : ★ As the wrench is released,the bearing stands into the middle of the clutch plate. ((Alex Harold))
  991. [2019-06-10 00:16:12] [Output] : ★ Alex Harold then slides the wrench out and leans over the other parts,letting the wrench down
  992. [2019-06-10 00:16:40] [Output] : ★ Alex Harold then picks up the clutch pressure plate and positions it over the clutch plate
  993. [2019-06-10 00:17:39] [Output] : ★ Alex Harold twists the plate to position it over the holes in order to attach the bolts
  994. [2019-06-10 00:18:05] [Output] : ★ Alex Harold unpockets the six bolts of the pressure plate and twists each one as he is getting them out.
  995. [2019-06-10 00:18:10] [Output] : ★ Alex Harold ...into their holes.
  996. [2019-06-10 00:18:45] [Output] : ★ Alex Harold then starts up the impact gun and tightens down the six bolts in a star pattern
  997. [2019-06-10 00:19:03] [Output] : ★ Alex Harold would then lean over to the jack and let down the impact gun
  998. [2019-06-10 00:19:26] [Output] : ★ Alex Harold uses his both hands after and uses the jackstand's lever to raise up the transmission placed
  999. [2019-06-10 00:19:31] [Output] : ★ Alex Harold ...on the wooden pallet
  1000. [2019-06-10 00:20:25] [Output] : ★ Alex Harold slowly mooves the transmision to the front and positions it over the bolt holes
  1001. [2019-06-10 00:21:01] [Output] : ★ Alex Harold picks up the eight bolts of the transmission and stands up in front of the holes
  1002. [2019-06-10 00:21:58] [Output] : ★ Alex Harold then twists the bolts into their holes and mooves up to the back mount of the transmission
  1003. [2019-06-10 00:22:14] [Output] : ★ Alex Harold sits down again and picks up the two bolts holding the mount in
  1004. [2019-06-10 00:22:30] [Output] : ★ Alex Harold stands up after and twists the two bolts in place
  1005. [2019-06-10 00:22:40] [Output] : ★ Alex Harold leans over the impact gun and picks it up,returning up
  1006. [2019-06-10 00:23:46] [Output] : ★ Alex Harold starts up the impact gun and pushes in the two bolts tightening them up to the max torque
  1007. [2019-06-10 00:24:05] [Output] : ★ Alex Harold then mooves up to the front bolts in order to tighten them up
  1008. [2019-06-10 00:25:00] [Output] : ★ Alex Harold uses the impact gun again and tightens down the eight bolts holding the transmision into the
  1009. [2019-06-10 00:25:02] [Output] : ★ Alex Harold ...engine bay
  1010. [2019-06-10 00:25:18] [Output] : ★ Alex Harold lets the impact gun down on the floor
  1011. [2019-06-10 00:25:33] [Output] : ★ The clutch cable out be hanging out on the chassis ((Alex Harold))
  1012. [2019-06-10 00:25:47] [Output] : ★ Alex Harold stands up after and pulls the cable to him
  1013. [2019-06-10 00:26:24] [Output] : ★ Alex Harold then inserts the cable into place and plugs it in it's plug
  1014. [2019-06-10 00:26:47] [Output] : ★ Alex Harold then leans over to the ground and picks up the dust cover of the cable and the impact gun
  1015. [2019-06-10 00:27:15] [Output] : ★ Alex Harold stands up after and places the dust cover on top of the cabble,positioning it over the holes
  1016. [2019-06-10 00:27:33] [Output] : ★ Alex Harold then unpockets two bolts and twists them into the cover's holes,tightening them after.
  1017. [2019-06-10 00:28:20] [Output] : ★ Alex Harold then pulls the wire to him and plugs it in it's plug
  1018. [2019-06-10 00:28:43] [Output] : ★ Alex Harold mooves down to the jackstand and uses it's handle to lower it down
  1019. [2019-06-10 00:29:26] [Output] : ★ Alex Harold then drives the pallet to the door of the garage,getting it out of the car
  1020. [2019-06-10 00:30:22] [Output] : ★ Alex Harold then uses the lift's remote and lowers the car enough to acces it
  1021. [2019-06-10 00:30:41] [Output] : ★ Alex Harold steps inside the car on the driver's door in order to attach the shifter
  1022. [2019-06-10 00:30:46] [Output] : * Alex Harold presses on the key to unlock the vehicle. ((2019 Subaru WRX STI)) *
  1023. [2019-06-10 00:31:21] [Output] : ★ Alex Harold grabs up the metal cover from the inside of the gearbox and places it back on the four holes
  1024. [2019-06-10 00:31:49] [Output] : ★ Alex Harold then picks up the four bolts from the passenger seat and then twists them back into the hole
  1025. [2019-06-10 00:31:51] [Output] : Alex Harold: (( holes* ))
  1026. [2019-06-10 00:32:09] [Output] : ★ Alex Harold gets out and picks his impact gun,returning into the car
  1027. [2019-06-10 00:32:24] [Output] : ★ Alex Harold starts up the impact gun and tightens down the four bolts in a cross pattern
  1028. [2019-06-10 00:32:44] [Output] : ★ Alex Harold then picks up the shifter body and positions it back into place
  1029. [2019-06-10 00:33:05] [Output] : ★ Alex Harold picks up the two bolts of the shifter and twists them into the holes while holding the...
  1030. [2019-06-10 00:33:13] [Output] : ★ Alex Harold ...shifter with his left hand
  1031. [2019-06-10 00:33:46] [Output] : ★ Alex Harold then starts up the impact gun and uses it to tighten down the two bolts,one after the other
  1032. [2019-06-10 00:34:37] [Output] : ★ Alex Harold then picks up the cover from the passenger's side and slides it on top of the shifter
  1033. [2019-06-10 00:34:49] [Output] : ★ Alex Harold then pushes the cover in place until it clicks
  1034. [2019-06-10 00:35:14] [Output] : ★ After a click,the plastic cover would stick into the clamps ((Alex Harold))
  1035. [2019-06-10 00:35:49] [Output] : ★ Alex Harold then picks up the shifter knob and twists it to the right,attaching it back in place.
  1036. [2019-06-10 00:36:02] [Output] : ★ Alex Harold then grabs his impact gun and steps out of the car.
  1037. [2019-06-10 00:36:04] [Output] : Vehicle spawn position set.
  1038. [2019-06-10 00:36:22] [Output] : ★ Alex Harold makes his way to the parts on the left side,taking the water pump up
  1039. [2019-06-10 00:36:40] [Output] : ★ Alex Harold goes to the front of the engine to place it in it's place
  1040. [2019-06-10 00:37:06] [Output] : ★ Alex Harold positions the pump over it's hole and unpockets two bolts
  1041. [2019-06-10 00:37:40] [Output] : ★ Alex Harold uses his left and and twists the bolts back in
  1042. [2019-06-10 00:38:23] [Output] : ★ Alex Harold starts up the impact gun and uses it to tighten down the two bolts
  1043. [2019-06-10 00:39:33] [Output] : ★ Alex Harold then makes his way to the alternator,taking it up
  1044. [2019-06-10 00:39:46] [Output] : ★ Alex Harold picks the alternator up and returns to the front side of the engine
  1045. [2019-06-10 00:40:11] [Output] : ★ Alex Harold places the alternator back on the left side of the engine and holds it with his left hand
  1046. [2019-06-10 00:41:31] [Output] : ★ Alex Harold unpockets the two alternator bolts and twists them back into their holes
  1047. [2019-06-10 00:41:44] [Output] : ★ Alex Harold then starts up the impact gun and tightens it's bolts back in
  1048. [2019-06-10 00:44:09] [Output] : ★ Alex Harold makes his way back over to the parts after and picks up the ac compressor and the power...
  1049. [2019-06-10 00:44:13] [Output] : ★ Alex Harold ...steering pump
  1050. [2019-06-10 00:44:27] [Output] : ★ Alex Harold returns back to the engine and lets the steering pump sit on the top
  1051. [2019-06-10 00:44:43] [Output] : ★ Alex Harold places the ac compressor on the right side of the engine and positions it over the holes
  1052. [2019-06-10 00:45:02] [Output] : ★ Alex Harold then unpockets two bolts and uses his impact gun to tighten them back into their holes
  1053. [2019-06-10 00:45:32] [Output] : ★ Alex Harold picks up the power steering pump after and puts it in it's place,unpocketing two bolts
  1054. [2019-06-10 00:45:55] [Output] : ★ Alex Harold then gets the bolts tightened in with his impact gun and reconnects the line to it
  1055. [2019-06-10 00:46:10] [Output] : ★ Alex Harold then makes his way to the two lines of the ac compressor and twists them back as well
  1056. [2019-06-10 00:46:27] [Output] : ★ Alex Harold then heads to the rest of parts in order to pick up the two serpentine belt
  1057. [2019-06-10 00:46:31] [Output] : Alex Harold: (( belts* ))
  1058. [2019-06-10 00:46:42] [Output] : ★ Alex Harold picks the belts up and then returns to the car
  1059. [2019-06-10 00:47:04] [Output] : ★ Alex Harold puts the shorther belt down and then takes the longer one on the front of the engine
  1060. [2019-06-10 00:47:27] [Output] : ★ Alex Harold positions the belt over the alternator and power steering pump and drags it to the top
  1061. [2019-06-10 00:47:46] [Output] : ★ Alex Harold then allings the belt over a roller and the watter pump,sliding it back on the pump
  1062. [2019-06-10 00:48:03] [Output] : ★ Alex Harold takes up the second bolt then and places it over the ac compressor,pulling it up
  1063. [2019-06-10 00:48:22] [Output] : ★ Alex Harold places the top of the belt over the other four rollers and ties it around the alternator as
  1064. [2019-06-10 00:48:24] [Output] : ★ Alex Harold ...well
  1065. [2019-06-10 00:48:48] [Output] : ★ Alex Harold then returns to the few left parts in order to pick up the belts cover which has the oil...
  1066. [2019-06-10 00:48:56] [Output] : ★ Alex Harold ...filter linked to it
  1067. [2019-06-10 00:49:11] [Output] : ★ Alex Harold grabs the cover in his hands and makes his way back into the engine bay
  1068. [2019-06-10 00:49:32] [Output] : ★ Alex Harold positions the cover over the serpentine belts and allings the fuel filter to it's place.
  1069. [2019-06-10 00:49:59] [Output] : ★ Alex Harold then unpockets the eight bolts holding the cover into the engine and hand twists them back i
  1070. [2019-06-10 00:50:15] [Output] : ★ Alex Harold then starts up the impact gun and tightens down the bolts in a cross pattern
  1071. [2019-06-10 00:51:10] [Output] : ★ Alex Harold then goes to the lifts control panel and uses it to raise up the car lift
  1072. [2019-06-10 00:51:39] [Output] : ★ Alex Harold goes under the car after inspecting for the exhaust manifold places on the new block
  1073. [2019-06-10 00:51:57] [Output] : ★ Alex Harold walks to the twin turbo set after in order to grab it closer to the car
  1074. [2019-06-10 00:52:26] [Output] : ★ Alex Harold takes up all the parts placed in the box and drags the box all the way to the car
  1075. [2019-06-10 00:52:44] [Output] : ★ Alex Harold lets the big box sit down in the back of the car,then looking into it
  1076. [2019-06-10 00:54:34] [Output] : ★ Alex Harold takes up the left turbo exhaust manifold and heads straight under the car
  1077. [2019-06-10 00:54:49] [Output] : ★ Alex Harold positions the manifold on it's holes holding it in his left hand
  1078. [2019-06-10 00:55:05] [Output] : ★ As the manifold i a new,lightened one,Alex would easily handle it ((Alex Harold))
  1079. [2019-06-10 00:55:49] [Output] : ★ Alex Harold then takes twelve bolts out meant to get the manifold in place.
  1080. [2019-06-10 00:56:02] [Output] : ★ Alex Harold twists them in their holes and then picks up the impact gun,tightening them all after
  1081. [2019-06-10 00:56:29] [Output] : ★ Alex Harold then heads back to the set and grabs the second manifold
  1082. [2019-06-10 00:56:40] [Output] : ★ Alex Harold returns back under the car in order to attach the manifold to it
  1083. [2019-06-10 00:56:56] [Output] : ★ Alex Harold places the manifold over it's holes and holds it in
  1084. [2019-06-10 00:57:19] [Output] : ★ Alex Harold then unpockets the last bolts from the left pocket and screws them back in
  1085. [2019-06-10 00:57:33] [Output] : ★ Alex Harold uses up his impact gun after and tightens down the bolts in a cross pattern
  1086. [2019-06-10 00:58:08] [Output] : ★ Alex Harold then heads to the last parts in order to pick up the intake manifold
  1087. [2019-06-10 00:58:21] [Output] : ★ Alex Harold picks up the intake manifold in his hands and returns to the engine
  1088. [2019-06-10 00:58:39] [Output] : ★ Alex Harold places the manifold on top of the engine and alligns it over the holes
  1089. [2019-06-10 00:59:03] [Output] : ★ Alex Harold then takes it's bolts from the ground and twists them back into the holes
  1090. [2019-06-10 00:59:20] [Output] : ★ Alex Harold starts up the impact gun after and further mooves up tightening the bolts
  1091. [2019-06-10 00:59:42] [Output] : ★ Alex Harold then positions the impact gun on the right side of the engine and returns to the fuel rails
  1092. [2019-06-10 00:59:54] [Output] : ★ The fuel rails would be hanging on the back side of the engine ((Alex Harold))
  1093. [2019-06-10 01:00:13] [Output] : ★ Alex Harold grabs the right fuel rail and places it over the injector holes,pushing it in
  1094. [2019-06-10 01:00:29] [Output] : ★ You would hear a short click indicating that the rail is safe ((Alex Harold))
  1095. [2019-06-10 01:01:33] [Output] : [English] Alex Harold shouts: Enter!!
  1096. [2019-06-10 01:03:47] [Output] : ★ Alex Harold takes the left fuel rail as well and places it over the injector holes,pushing it in
  1097. [2019-06-10 01:04:05] [Output] : ★ Alex Harold then takes up the impact gun and tightens down all the four bolts of the fuel rails
  1098. [2019-06-10 01:04:51] [Output] : ★ Alex Harold then lets the impact gun on the side and goes to the spark plugs and coils
  1099. [2019-06-10 01:05:06] [Output] : ★ Alex Harold takes up six of the spark plugs and their coils along with the spark plug key
  1100. [2019-06-10 01:05:41] [Output] : ★ Alex Harold positions the sparkplugs into the holes and uses the key to tighten them down
  1101. [2019-06-10 01:06:02] [Output] : ★ Alex Harold then puts a coil over each spark plug and connects the wires to them
  1102. [2019-06-10 01:06:25] [Output] : ★ Alex Harold then goes to take up the rest of sparkplugs and repeats the process on the other side
  1103. [2019-06-10 01:06:47] [Output] : ★ Alex Harold then rejoins all the wires in the engine bay to power up the engine
  1104. [2019-06-10 01:06:57] [Output] : [English] Alex Harold says: Great,it will run,now the turbos
  1105. [2019-06-10 01:07:21] [Output] : ★ Alex Harold takes up a T-pipe from the set in order to place it on the manifolds top side
  1106. [2019-06-10 01:07:50] [Output] : ★ Alex Harold then heads back to the exhaust and connects the pipe to it
  1107. [2019-06-10 01:08:03] [Output] : ★ Alex Harold uses his left hand then and grabs the pipe's clamp down
  1108. [2019-06-10 01:08:35] [Output] : ★ Alex Harold would then go back to the rest of remaining parts to pick up the four throtles
  1109. [2019-06-10 01:08:51] [Output] : ★ Alex Harold picks the throtles up and makes his way back to the intake manifold
  1110. [2019-06-10 01:09:10] [Output] : ★ Alex Harold places down the first throtle over it's hole and grabs four bolts,tightening them
  1111. [2019-06-10 01:10:29] [Output] : ★ Alex Harold then repeats the process,placing all four throtles back on the intake manifold
  1112. [2019-06-10 01:11:08] [Output] : ★ Alex Harold then replugs the throtle sensors in and moves to the box of the kit
  1113. [2019-06-10 01:11:35] [Output] : ★ Alex Harold takes up another hose meant to connect the intake to the turbo
  1114. [2019-06-10 01:11:53] [Output] : ★ Alex Harold heads back to the engine with the hose in his hands and places it on the right side over the
  1115. [2019-06-10 01:12:02] [Output] : ★ Alex Harold ...throtle bodies
  1116. [2019-06-10 01:12:34] [Output] : ★ Alex Harold squezees the hose over the throtles and grabs the clamps by hand,locking the hose in place
  1117. [2019-06-10 01:12:49] [Output] : ★ Alex Harold then makes his way back to the box in order to pick up another part
  1118. [2019-06-10 01:13:09] [Output] : ★ Alex Harold picks up a wastegate which already has it's springs attached from the factory and returns to
  1119. [2019-06-10 01:13:16] [Output] : ★ Alex Harold ...the T-pipe
  1120. [2019-06-10 01:13:46] [Output] : ★ Alex Harold places the wastegate on the side exit of the pipe and holds it in place.
  1121. [2019-06-10 01:14:11] [Output] : ★ Alex Harold takes up the impact manifold and tightens down the wastegate's bolts into the pipe
  1122. [2019-06-10 01:14:48] [Output] : ★ Alex Harold then heads back to the box in order to pick up one of the turbos
  1123. [2019-06-10 01:15:01] [Output] : ★ Alex Harold picks up the turbo and heads back into the engine in order to place it
  1124. [2019-06-10 01:16:12] [Output] : ★ Alex Harold places the turbo over the exhaust pipe in order to get it tightened down
  1125. [2019-06-10 01:16:37] [Output] : ★ Alex Harold then connects the hose to the turbo's exit and grabs the clamp,locking it
  1126. [2019-06-10 01:17:00] [Output] : ★ Alex Harold then uses the impact gun again in order to tighten down the turbo to the pipe
  1127. [2019-06-10 01:17:21] [Output] : ★ Alex Harold makes his way back to the box in order to pick up the last pipe of the left side
  1128. [2019-06-10 01:17:37] [Output] : ★ Alex Harold picks another T-bended down pipe and makes his way back
  1129. [2019-06-10 01:18:13] [Output] : ★ Alex Harold twists the pipe into the turbine's intake and tightens the two bolts down using the impact g
  1130. [2019-06-10 01:18:15] [Output] : Alex Harold: (( gun* ))
  1131. [2019-06-10 01:18:30] [Output] : ★ Alex Harold then goes to the box again to pick one last part for the left side
  1132. [2019-06-10 01:18:51] [Output] : ★ Alex Harold picks up one K&N sport air filter and heads back
  1133. [2019-06-10 01:19:16] [Output] : ★ Alex Harold twists the filter into the side exit of the pipe,going back to the box to get the rest of ..
  1134. [2019-06-10 01:19:18] [Output] : ★ Alex Harold ...the parts
  1135. [2019-06-10 01:19:33] [Output] : ★ Alex Harold picks up the parts closer to the car in order to install the second turbo
  1136. [2019-06-10 01:20:26] [Output] : ★ Alex Harold places the T-pipe over the exhaust manifold and then uses the impact gun to tighten it in
  1137. [2019-06-10 01:20:44] [Output] : ★ Alex Harold then takes the turbo up and places it on top of the T-pipe,tightening it's bolts down as wel
  1138. [2019-06-10 01:21:14] [Output] : ★ Alex Harold then picks the second wastegate up and places it on the side exit of the t-pipe,tightening
  1139. [2019-06-10 01:21:22] [Output] : ★ Alex Harold ...it's two bolts into the pipe
  1140. [2019-06-10 01:21:43] [Output] : ★ Alex Harold then takes up the intake hose from the set and twists it's exits into the throttles
  1141. [2019-06-10 01:22:00] [Output] : ★ Alex Harold then grabs it's clamps and locks them over the two throttle bodies
  1142. [2019-06-10 01:22:39] [Output] : ★ Alex Harold then connects the hose to the turbine's exit and grabs the clamp,locking it over
  1143. [2019-06-10 01:22:57] [Output] : ★ Alex Harold finally picks up the bended down t pipe and places it on the turbine's intake
  1144. [2019-06-10 01:23:19] [Output] : ★ Alex Harold starts up the impact gun and then tightens down the two bolts holding the pipe into the...
  1145. [2019-06-10 01:23:25] [Output] : ★ Alex Harold ...turbine's intake gate
  1146. [2019-06-10 01:23:59] [Output] : ★ Alex Harold then takes the second sport air filter and twists it on the side exit of the bended pipe
  1147. [2019-06-10 01:24:16] [Output] : ★ Alex Harold then goes back down to the kit and spots the two blow of valves
  1148. [2019-06-10 01:24:18] [Output] : [English] Alex Harold says: Upsi....
  1149. [2019-06-10 01:24:30] [Output] : ★ Alex Harold thinks about the situation and takes a quick solution
  1150. [2019-06-10 01:24:50] [Output] : [English] Alex Harold says: I will stick this to the intercooler's piping,they need to get air anyway
  1151. [2019-06-10 01:25:21] [Output] : ★ Alex Harold takes up one of the valves and puts it on the end of the pipe.
  1152. [2019-06-10 01:25:43] [Output] : ★ Alex Harold then grabs a clamp over the blow off's exit and locks it down
  1153. [2019-06-10 01:25:59] [Output] : ★ Alex Harold repeats the same process attaching the second blow off to the opposite pipe.
  1154. [2019-06-10 01:26:17] [Output] : ★ Alex Harold takes up the new big intercooler and slides it in place between the blow off's
  1155. [2019-06-10 01:26:33] [Output] : ★ Alex Harold gets the intercooler placed and twists the blow off's pipe into it,locking it in place.t
  1156. [2019-06-10 01:26:50] [Output] : ★ Alex Harold then grabs two clamps from the set and uses his pliers to tighten them down
  1157. [2019-06-10 01:27:03] [Output] : ★ Alex Harold finally picks up the rear bumper and places it back
  1158. [2019-06-10 01:27:17] [Output] : ★ Alex Harold firmly hits the bumper from left to right getting it's clamps in place.
  1159. [2019-06-10 01:27:32] [Output] : ★ After several clicks from the bumper's clamps,it would now be placed back ((Alex Harold))
  1160. [2019-06-10 01:27:48] [Output] : ★ Alex Harold walk to the left engine head then and spots the oil fill cap
  1161. [2019-06-10 01:27:59] [Output] : ★ Alex Harold twists the cap to the left dettaching it from it's place
  1162. [2019-06-10 01:28:29] [Output] : ★ Alex Harold then takes up a five litres oil can located near the wall and poors all the oil in the...
  1163. [2019-06-10 01:28:32] [Output] : ★ Alex Harold ...engine block
  1164. [2019-06-10 01:28:48] [Output] : ★ Alex Harold then throws the can away and takes the cap,twisting it back to the right
  1165. [2019-06-10 01:28:53] [Output] : [English] Alex Harold says: Finished and good to go!
  1166. [2019-06-10 01:34:48] [Output] : ★ Alex Harold grabs the left axle from the ground and places makes his way to the wheel's hub
  1167. [2019-06-10 01:35:06] [Output] : ★ Alex Harold swings the axle into the axleshaft and then slides it into the knuckle's hole.
  1168. [2019-06-10 01:35:33] [Output] : ★ Alex Harold takes up a wrist pin from the set further puting it back in the axle's hole and bending it
  1169. [2019-06-10 01:36:22] [Output] : ★ Alex Harold takes up the wheel and slides it to the wheel hub then unpocketing the lugnuts
  1170. [2019-06-10 01:36:39] [Output] : ★ Alex Harold twists the lugnuts in and uses his impact gun to tighten them in a star pattern
  1171. [2019-06-10 01:36:58] [Output] : ★ Alex Harold then grabs the second axle and makes his way to the opposite wheel
  1172. [2019-06-10 01:37:26] [Output] : ★ Alex Harold pushes the axle inside the shaft and then pulls it into the knuckle's hole
  1173. [2019-06-10 01:37:46] [Output] : ★ Alex Harold then grabs another pin and bends it around the axle
  1174. [2019-06-10 01:37:56] [Output] : ★ Alex Harold finally lifts the wheel up and slides it back into it's hub
  1175. [2019-06-10 01:38:10] [Output] : ★ Alex Harold twists the lugnuts in and uses his impact gun to tighten them down
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!