API tools faq
paste
Guest User

Untitled

a guest
Feb 27th, 2010
1,071
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.30 KB | None | 0 0
raw download clone embed print report
  1. Welcome to the Broadcom CLI (command-line interpreter).
  2. To access the native VxWorks shell, type 'shell'.
  3. CM>
  4. Received a UCD for Upstream Channel 2!
  5. Selecting UCD for Us Channel 2
  6.  
  7. BcmCmUsPhyOverheadSettings::ComputeReqDataPhyToMacTable() burst descriptor not
  8. ound for kReqDataIUC.
  9. Upstream Frequency = 22000000
  10. Found QAM16 = false
  11. 0x000017a2 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::TestAndLau
  12. chDsTimeSync: (CmDocsisCtlThread) entering...
  13. new_us_scdma_enabled = false
  14. fLastDsClockModeIsScdma = false
  15. fCmDsTargetingState = kDsPhyOkUsUcdPending
  16. IsDccContext() = false
  17.  
  18. 0x000017a2 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::TestAndLau
  19. chDsTimeSync: (CmDocsisCtlThread) starting ds time sync acquisition...
  20. 0x00001a22 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::SyncDsSync
  21. k: (CmDocsisCtlThread) downstream time sync acquired...
  22. 0x00001a22 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::DsSyncOkRe
  23. umeUsInit: (CmDocsisCtlThread) pre-REG upstream target case...starting initial
  24. ranging.
  25. Beginning initial ranging...
  26. Using stored initial upstream power = 54.0 dBmV
  27. 0x00001a22 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::SyncDsSync
  28. k: (CmDocsisCtlThread) rx unexpected kDsSyncOk indication...
  29. Logging event: T501.0 Acquired Downstream (117000000 Hz)........ SUCCESS
  30. v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:162, cmty="public"
  31. RNG-RSP Adj: tim=2758 power=20 freq=0 Stat=Continue
  32. 0x00001c98 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::ConfigStat
  33. onMaint: (CmDocsisCtlThread)
  34. config is kStationMaintenance mode.
  35. RNG-RSP Adj: tim=0 power=4 freq=0 Stat=Success
  36. 0x00001dce ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::ConfigStat
  37. onMaint: (CmDocsisCtlThread)
  38. config is kPeriodicRanging mode.
  39.  
  40. ******************************************
  41. UPSTREAM STATUS
  42. ******************************************
  43. Upstream Status = UP
  44. Upstream Channel = 2
  45. Upstream Frequency = 22000000 Hz
  46. Upstream Power = 60 dBmV
  47. Ranging SID = 0x1850
  48. Upstream Symbol Rate = 2560000 sym/sec
  49. ******************************************
  50.  
  51. Starting IP Initialization with DHCP...
  52. DHCPc: Waiting 4 seconds before sending Discover; client id htype=1, value=00:
  53. a:66:67:3a:03
  54. Logging event: T500.0 Acquired Upstream .......... SUCCESS
  55. v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:162, cmty="public"
  56. CM> DHCPc: Sending Discover packet; client id htype=1, value=00:1a:66:67:3a:03
  57. DHCPc: Received an Offer from DHCP server 00:01:5c:31:89:c2 (10.130.64.1); lea
  58. e client id htype=1, value=00:1a:66:67:3a:03
  59. CM> DHCPc: Timed out waiting for offers for lease with client id htype=1, valu
  60. =00:1a:66:67:3a:03
  61. DHCPc: Sending Request packet; client id htype=1, value=00:1a:66:67:3a:03
  62. DHCPc: Received an Ack from DHCP server 00:01:5c:31:89:c2 (10.130.64.1); lease
  63. client id htype=1, value=00:1a:66:67:3a:03
  64. Current IP address is default 169.0.0.1; removing existing route...
  65. 0x0000355c ['DHCP Client Thread' id=0x807c8fa0] BcmVxIpHalIf::ConfigureLeaseImp
  66. : (IP Stack1 HalIf)
  67. Configuring IP stack 1:
  68. IP Address = 10.130.83.185
  69. Subnet Mask = 255.255.192.0
  70. Router = 10.130.64.1
  71.  
  72. DHCP completed successfully!
  73.  
  74. DHCP Settings:
  75. Client Id = htype=1, value=00:1a:66:67:3a:03
  76. State = Bound (4)
  77. Static Lease = false
  78. AutoConfig Mode = IP, Subnet and Router
  79. XID = 0x2948
  80. Number of Tries = 0
  81. Max Discover Tries = 6
  82. Max Request Tries = 6
  83. DHCP server MAC addr = 00:01:5c:31:89:c2
  84. My offered IP address = 10.130.83.185
  85. (1) Subnet Mask = 255.255.192.0
  86. (3) Router IP address = 10.130.64.1
  87. (54) DHCP Server IP address = 10.200.1.5
  88. (82) Relay Agent IP address = 10.130.64.1
  89. TFTP Server IP address = 10.200.1.5
  90. CM Configuration file = 'cm-001a66673a03'
  91. (2) UTC Time Offset = -25200 seconds
  92. (4) Time Server IP address = 10.200.1.5
  93. (7) Log Server IP address = 10.200.1.5
  94. (51) Lease time = 1209253 seconds
  95. (58) T1 (renew) = 604626 seconds
  96. (59) T2 (rebind) = 1058096 seconds
  97. Lease is infinite = false
  98. (1) EMTA Primary Dhcp Server = '
  99. +?'
  100. (2) EMTA Secondary Dhcp Server = '
  101. +??'
  102.  
  103.  
  104. CmSnmpAgent::IpAddressAcquiredEvent for SB5100 CM Agent
  105. IP addr = 10.130.83.185
  106. SB5100 CM Agent ConfigIp: Ip=10.130.83.185, Subnet=255.255.192.0, Gateway=10.13
  107. .64.1
  108. CM> Starting Time Of Day...
  109. 0x0000394e ['CmDocsisIpThread' id=0x807c3b50] BcmDocsisTimeOfDayThread::SetTodS
  110. rverIpAddress: (Time Of Day Thread) ToD servers: 10.200.1.5
  111. Connecting to ToD server 10.200.1.5...
  112. Sending UDP ToD request to server...
  113. Logging event: DHCP WARNING - Non-critical field invalid in response.
  114. Logging event: D511.0 Retrieved DHCP .......... SUCCESS
  115. v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:162, cmty="public"
  116. UTC returned by ToD server 3476237201; UTC offset -25200
  117. Current system time -> FRI FEB 26 22:26:41 2010
  118.  
  119. System start time -> FRI FEB 26 22:26:27 2010
  120.  
  121. Starting Tftp of configuration file...
  122. Opening file 'cm-001a66673a03' on 10.200.1.5...
  123. tftpInit: Tftp outbound interface flag (1024)
  124. Connected to 10.200.1.5 [69]
  125. mode set to octet.
  126. getting from 10.200.1.5:cm-001a66673a03 [octet]
  127. tftpSend: Attempt #(1) Backoff (2) tickCount (1499) blkReply (1)
  128. Saving incoming Cfg: cm-001a66673a03 (2500 bytes)
  129. Cfg moved into memory
  130.  
  131. Downloading cm-001a66673a02 from 192.168.100.10
  132. tftpInit: Tftp outbound interface flag (0)
  133. Connected to 192.168.100.10 [69]
  134. mode set to octet.
  135. getting from 192.168.100.10:cm-001a66673a02 [octet]
  136. tftpSend: Attempt #(1) Backoff (2) tickCount (1512) blkReply (1)
  137. Tftp read ZERO bytes, may have reached end of file.
  138. Config file was read! IP Initialization completed...
  139. 0x00003b10 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::ParseAndVa
  140. idateConfigFile: (CmDocsisCtlThread) ERROR - Cm Config file doesn't contain an
  141. End of Configuration marker!
  142. 0x00003b10 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::ConfigFile
  143. rrorEvent: (CmDocsisCtlThread) ERROR - Error detected in CM config file. Down
  144. oad rescue(!) config file.
  145. 0x00003b1a ['CmDocsisIpThread' id=0x807c3b50] BcmCmDocsisIpThread::RestartTftpC
  146. nfigFile: (CmDocsisIpThread) ERROR - Failed to read the config file, or it was
  147. rejected by the client!
  148. 0x00003b1a ['CmDocsisIpThread' id=0x807c3b50] BcmCmDocsisIpThread::RestartTftpC
  149. nfigFile: (CmDocsisIpThread) ERROR - Will try again later...(after 20 seconds)
  150. 0x00003b1a ['CmDocsisIpThread' id=0x807c3b50] BcmCmDocsisIpThread::RestartTftpC
  151. nfigFile: (CmDocsisIpThread) WARNING -
  152. **
  153. *
  154. * Using non-DOCSIS compliant TFTP retry timeout value from nonvol!
  155. * DOCSIS requires 600 seconds!
  156. *
  157. **
  158.  
  159. Time Of Day completed...
  160. BcmSnmpAgent::SystemTimeChangeEvent for SB5100 CM Agent
  161. Logging event: Config file rejected due to missing end-of-file marker
  162. Logging event: TFTP file complete - but missing mandatory TLV
  163. Logging event: D509.0 Retrieved TFTP Config cm-001a66673a03 SUCCESS
  164. v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:162, cmty="public"
  165. Logging event: D507.0 Retrieved Time....... SUCCESS
  166. v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:162, cmty="public"
  167. CM> Starting Tftp of configuration file...
  168. Opening file 'cm-001a66673a03' on 10.200.1.5...
  169. tftpInit: Tftp outbound interface flag (1024)
  170. Connected to 10.200.1.5 [69]
  171. mode set to octet.
  172. getting from 10.200.1.5:cm-001a66673a03 [octet]
  173. tftpSend: Attempt #(1) Backoff (2) tickCount (3516) blkReply (1)
  174. Saving incoming Cfg: cm-001a66673a03 (2500 bytes)
  175. Cfg moved into memory
  176.  
  177. Downloading cm-001a66673a02 from 192.168.100.10
  178. tftpInit: Tftp outbound interface flag (0)
  179. Connected to 192.168.100.10 [69]
  180. mode set to octet.
  181. getting from 192.168.100.10:cm-001a66673a02 [octet]
  182. tftpSend: Attempt #(1) Backoff (2) tickCount (3523) blkReply (1)
  183. Tftp read ZERO bytes, may have reached end of file.
  184. Config file was read! IP Initialization completed...
  185. 0x000089a8 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::ParseAndVa
  186. idateConfigFile: (CmDocsisCtlThread) ERROR - Cm Config file doesn't contain an
  187. End of Configuration marker!
  188. 0x000089a8 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::ConfigFile
  189. rrorEvent: (CmDocsisCtlThread) ERROR - Error detected in CM config file. Down
  190. oad rescue(!) config file.
  191. 0x000089a8 ['CmDocsisIpThread' id=0x807c3b50] BcmCmDocsisIpThread::RestartTftpC
  192. nfigFile: (CmDocsisIpThread) ERROR - Failed to read the config file, or it was
  193. rejected by the client!
  194. 0x000089a8 ['CmDocsisIpThread' id=0x807c3b50] BcmCmDocsisIpThread::RestartTftpC
  195. nfigFile: (CmDocsisIpThread) ERROR - Will try again later...(after 20 seconds)
  196. 0x000089a8 ['CmDocsisIpThread' id=0x807c3b50] BcmCmDocsisIpThread::RestartTftpC
  197. nfigFile: (CmDocsisIpThread) WARNING -
  198. **
  199. *
  200. * Using non-DOCSIS compliant TFTP retry timeout value from nonvol!
  201. * DOCSIS requires 600 seconds!
  202. *
  203. **
  204.  
  205. Logging event: Config file rejected due to missing end-of-file marker
  206. Logging event: TFTP file complete - but missing mandatory TLV
  207. Logging event: D509.0 Retrieved TFTP Config cm-001a66673a03 SUCCESS
  208. v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:162, cmty="public"
  209. CM>
  210.  
  211. Connection to host lost.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!