vGPU

root@pve0:~/proxmox-vgpu-installer# cat debug.log

WARNING: apt does not have a stable CLI interface. Use with caution in scripts.


WARNING: apt does not have a stable CLI interface. Use with caution in scripts.


WARNING: apt does not have a stable CLI interface. Use with caution in scripts.

Generating grub configuration file ...
W: This system is booted via proxmox-boot-tool:
W: Executing 'update-grub' directly does not update the correct configs!
W: Running: 'proxmox-boot-tool refresh'

Copying and configuring kernels on /dev/disk/by-uuid/4EFC-9CDD
        Copying kernel and creating boot-entry for 6.5.13-5-pve
        Copying kernel and creating boot-entry for 6.8.4-2-pve
        Copying kernel and creating boot-entry for 6.8.4-3-pve
Copying and configuring kernels on /dev/disk/by-uuid/4F1E-1A96
        Copying kernel and creating boot-entry for 6.5.13-5-pve
        Copying kernel and creating boot-entry for 6.8.4-2-pve
        Copying kernel and creating boot-entry for 6.8.4-3-pve
Found linux image: /boot/vmlinuz-6.8.4-3-pve
Found initrd image: /boot/initrd.img-6.8.4-3-pve
/usr/sbin/grub-probe: error: unknown filesystem.
Found linux image: /boot/vmlinuz-6.8.4-2-pve
Found initrd image: /boot/initrd.img-6.8.4-2-pve
Found linux image: /boot/vmlinuz-6.5.13-5-pve
Found initrd image: /boot/initrd.img-6.5.13-5-pve
/usr/sbin/grub-probe: error: unknown filesystem.
Adding boot menu entry for UEFI Firmware Settings ...
done
Copying and configuring kernels on /dev/disk/by-uuid/4EFC-9CDD
        Copying kernel and creating boot-entry for 6.5.13-5-pve
        Copying kernel and creating boot-entry for 6.8.4-2-pve
        Copying kernel and creating boot-entry for 6.8.4-3-pve
Copying and configuring kernels on /dev/disk/by-uuid/4F1E-1A96
        Copying kernel and creating boot-entry for 6.5.13-5-pve
        Copying kernel and creating boot-entry for 6.8.4-2-pve
        Copying kernel and creating boot-entry for 6.8.4-3-pve
Copying and configuring kernels on /dev/disk/by-uuid/4EFC-9CDD
        Copying kernel and creating boot-entry for 6.5.13-5-pve
        Copying kernel and creating boot-entry for 6.8.4-2-pve
        Copying kernel and creating boot-entry for 6.8.4-3-pve
Copying and configuring kernels on /dev/disk/by-uuid/4F1E-1A96
        Copying kernel and creating boot-entry for 6.5.13-5-pve
        Copying kernel and creating boot-entry for 6.8.4-2-pve
        Copying kernel and creating boot-entry for 6.8.4-3-pve
Copying and configuring kernels on /dev/disk/by-uuid/4EFC-9CDD
        Copying kernel and creating boot-entry for 6.5.13-5-pve
        Copying kernel and creating boot-entry for 6.8.4-2-pve
        Copying kernel and creating boot-entry for 6.8.4-3-pve
Copying and configuring kernels on /dev/disk/by-uuid/4F1E-1A96
        Copying kernel and creating boot-entry for 6.5.13-5-pve
        Copying kernel and creating boot-entry for 6.8.4-2-pve
        Copying kernel and creating boot-entry for 6.8.4-3-pve

ERROR: Unable to load the kernel module 'nvidia.ko'.  This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if another driver, such as nouveau, is present and prevents the NVIDIA kernel module from obtaining ownership of the NVIDIA device(s), or no NVIDIA device installed in this system is supported by this NVIDIA Linux graphics driver release.

Please see the log entries 'Kernel module load error' and 'Kernel messages' at the end of the file '/var/log/nvidia-installer.log' for more information.


ERROR: Installation has failed.  Please see the file '/var/log/nvidia-installer.log' for details.  You may find suggestions on fixing installation problems in the README available on the Linux driver download page at www.nvidia.com.

Failed to enable unit: Unit file nvidia-vgpud.service does not exist.
Failed to enable unit: Unit file nvidia-vgpu-mgr.service does not exist.

WARNING: apt does not have a stable CLI interface. Use with caution in scripts.


WARNING: apt does not have a stable CLI interface. Use with caution in scripts.


WARNING: apt does not have a stable CLI interface. Use with caution in scripts.

writing RSA key
...................+.+.........+.....+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*.+..+....+..+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*.....+..+.............+...+...........+.+............+....................+.+......+........................+..+...+.+...+..+...+...+.........+.+.....+...+.........+.+.........+...........+.........+.............+..+.......+..............+.........+......+.+...+..+......+.......+..+.+............+........+....+...........+...+......+....+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
...+..+....+......+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*.........+.......+...+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*.......+...+..........+..+.+..............+.......+...........+............+......+......+....+.....+..........+..............+.+......+...+........+.............+......+........+...+....+.....+......+...+.+...+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-----
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [AU]:State or Province Name (full name) [Some-State]:Locality Name (eg, city) []:Organization Name (eg, company) [Internet Widgits Pty Ltd]:Organizational Unit Name (eg, section) []:Common Name (e.g. server FQDN or YOUR name) []:Email Address []:Creating network "fastapi-dls_default" with the default driver
Creating volume "fastapi-dls_dls-db" with default driver
Creating wvthoog-fastapi-dls ...
Creating wvthoog-fastapi-dls ... done