Advertisement
Guest User

Untitled

a guest
Apr 12th, 2015
908
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.87 KB | None | 0 0
  1. CFE for Foxconn Router R6300v2 version: v1.0.16
  2. Build Date: Thu Dec 12 17:57:15 CST 2013
  3. Init Arena
  4. Init Devs.
  5. Boot up from NAND flash...
  6. Boot partition size = 262144(0x40000)
  7. DDR Clock: 533 MHz
  8. Info: DDR frequency set from clkfreq=800,*533*
  9. et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.15.7 (r437571)
  10. CPU type 0x0: 800MHz
  11. Tot mem: 262144 KBytes
  12.  
  13. Device eth0: hwaddr 6C-B0-CE-B7-38-52, ipaddr 192.168.1.1, mask 255.255.255.0
  14. gateway not set, nameserver not set
  15. Checking crc...Loader:raw Filesys:raw Dev:nflash0.os File: Options:(null)
  16. Loading: .. 1516776 bytes read
  17. Entry at 0x00008000
  18. Closing network.
  19. Starting program at 0x00008000
  20. Uncompressing Linux... done, booting the kernel.
  21. Booting Linux on physical CPU 0x0
  22. Linux version 3.10.52 (bluebat@opensuse) (gcc version 4.9.1 (OpenWrt/Linaro GCC 4.9-2014.06 r41266) ) #254 SMP Thu Aug 14 22:54:45 CEST 2014
  23. CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d
  24. CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  25. Machine: Northstar Prototype
  26. Ignoring unrecognised tag 0x00000000
  27. Memory policy: ECC disabled, Data cache writealloc
  28. map io
  29. MPCORE found at 19020000 (VIRT d9020000) 18000000 d8000000
  30. PERCPU: Embedded 7 pages/cpu @c16a7000 s7040 r8192 d13440 u32768
  31. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65280
  32. Kernel command line: console=ttyS0,115200 panic=10 root=/dev/mtdblock3 earlyprin tk=1 rootfstype=squashfs,jffs2 noinitrd init=/bin/sh
  33. PID hash table entries: 512 (order: -1, 2048 bytes)
  34. Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  35. Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  36. Memory: 128MB 128MB = 256MB total
  37. Memory: 255160k/255160k available, 6984k reserved, 131072K highmem
  38. Virtual kernel memory layout:
  39. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  40. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  41. vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
  42. lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
  43. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  44. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  45. .text : 0xc0008000 - 0xc03bddec (3800 kB)
  46. .init : 0xc03be000 - 0xc03f8b80 ( 235 kB)
  47. .data : 0xc03fa000 - 0xc0436ea0 ( 244 kB)
  48. .bss : 0xc0436ea0 - 0xc04970e4 ( 385 kB)
  49. Hierarchical RCU implementation.
  50. CONFIG_RCU_FANOUT set to non-default value of 2
  51. NR_IRQS:256
  52. MPCORE GIC init
  53. External imprecise Data abort at addr=0x0, fsr=0x1c06 ignored.
  54. MPCORE Global Timer Clock 400000000Hz on IRQ 27
  55. sched_clock: 32 bits at 400MHz, resolution 2ns, wraps every 10737ms
  56. register local timer
  57. smp_twd: clock not found -2
  58. Calibrating delay loop... 1594.16 BogoMIPS (lpj=7970816)
  59. pid_max: default: 32768 minimum: 301
  60. Mount-cache hash table entries: 512
  61. CPU: Testing write buffer coherency: ok
  62. CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  63. Calibrating local timer... 399.68MHz.
  64. 2 cores has been found
  65. Setting up static identity map for 0xc00127e8 - 0xc001281c
  66. L310: cache controller enabled 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x7a130000
  67. CPU1: Booted secondary processor
  68. CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  69. Brought up 2 CPUs
  70. SMP: Total of 2 processors activated (3188.32 BogoMIPS).
  71. NET: Registered protocol family 16
  72. DMA: preallocated 256 KiB pool for atomic coherent allocations
  73. Found a Mxic NAND flash:
  74. Total size: 128MB
  75. Block size: 128KB
  76. Page Size: 2048B
  77. OOB Size: 64B
  78. Sector size: 512B
  79. Spare size: 16B
  80. ECC level: 8 (8-bit)
  81. Device ID: 0xc2 0xf1 0x80 0x1d 0xc2 0xf1
  82. found nand nvram at 80000
  83. CCA UART Clock Config: Sel=1 Ovr=1 Div=48
  84. CCA UART Clock rate 100000000Hz
  85. bio: create slab <bio-0> at 0
  86. Switching to clocksource mpcore_gtimer
  87. NET: Registered protocol family 2
  88. TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  89. TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
  90. TCP: Hash tables configured (established 1024 bind 1024)
  91. TCP: reno registered
  92. UDP hash table entries: 256 (order: 1, 8192 bytes)
  93. UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  94. NET: Registered protocol family 1
  95. init gpio code
  96. Netgear AC1450/R6250/R6300v2/EX6200 init
  97. PCI: no core
  98. PCI: no core
  99. PCI: scanning bus 0
  100. PCI host bridge to bus 0000:00
  101. pci_bus 0000:00: root bus resource [io 0x0000-0xffffffff]
  102. pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
  103. pci_bus 0000:00: root bus resource [bus 00-ff]
  104. PCI: Fixing up bus 0
  105. PCIE1 link=1
  106. PCIE1 switching to GEN2
  107. PCIE1 link=1
  108. PCI host bridge to bus 0001:00
  109. pci_bus 0001:00: root bus resource [mem 0x08000000-0x0fffffff]
  110. pci_bus 0001:00: No busn resource found for root bus, will use [bus 00-ff]
  111. PCI: Fixing up bus 0
  112. PCI: bus0: Fast back to back transfers disabled
  113. PCI: Fixing up bus 1
  114. PCI: bus1: Fast back to back transfers disabled
  115. pci 0001:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff]
  116. pci 0001:01:00.0: BAR 0: assigned [mem 0x08000000-0x08003fff 64bit]
  117. pci 0001:00:00.0: PCI bridge to [bus 01]
  118. pci 0001:00:00.0: bridge window [mem 0x08000000-0x080fffff]
  119. PCIE2 link=1
  120. PCIE2 switching to GEN2
  121. PCIE2 link=1
  122. PCI host bridge to bus 0002:00
  123. pci_bus 0002:00: root bus resource [mem 0x40000000-0x47ffffff]
  124. pci_bus 0002:00: No busn resource found for root bus, will use [bus 00-ff]
  125. PCI: Fixing up bus 0
  126. PCI: bus0: Fast back to back transfers disabled
  127. PCI: Fixing up bus 2
  128. PCI: bus2: Fast back to back transfers disabled
  129. pci 0002:00:00.0: BAR 8: assigned [mem 0x40000000-0x400fffff]
  130. pci 0002:02:00.0: BAR 0: assigned [mem 0x40000000-0x40007fff 64bit]
  131. pci 0002:00:00.0: PCI bridge to [bus 02]
  132. pci 0002:00:00.0: bridge window [mem 0x40000000-0x400fffff]
  133. PCIE3 link=0
  134. Error creating gpio class
  135. squashfs: version 3.0 (2006/03/15) Phillip Lougher
  136. msgmni has been set to 242
  137. alg: No test for stdrng (krng)
  138. io scheduler noop registered (default)
  139. io scheduler cfq registered
  140. Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
  141. serial8250.0: ttyS0 at MMIO 0x18000300 (irq = 117) is a 16550
  142. console [ttyS0] enabled
  143. serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117) is a 16550
  144. brd: module loaded
  145. loop: module loaded
  146. bcmsflash: found no supported devices
  147. Boot partition size = 524288(0x80000)
  148. lookup_nflash_rootfs_offset: offset = 0x380000, 0x20000
  149. found TRX Header on nflash!
  150. nflash: squash filesystem with lzma found at block 41
  151. Creating 5 MTD partitions on "nflash":
  152. 0x000000000000-0x000000080000 : "boot"
  153. 0x000000080000-0x000000200000 : "nvram"
  154. 0x000000380000-0x000002000000 : "linux"
  155. 0x000000520000-0x000002000000 : "rootfs"
  156. 0x000000200000-0x000000220000 : "board_data"
  157. tun: Universal TUN/TAP device driver, 1.6
  158. tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  159. PPP generic driver version 2.4.2
  160. PPP BSD Compression module registered
  161. PPP Deflate Compression module registered
  162. PPP MPPE Compression module registered
  163. NET: Registered protocol family 24
  164. GACT probability NOT on
  165. Mirror/redirect action on
  166. Failed to load ipt action
  167. Simple TC action Loaded
  168. netem: version 1.3
  169. u32 classifier
  170. Performance counters on
  171. input device check on
  172. Actions configured
  173. Netfilter messages via NETLINK v0.30.
  174. nf_conntrack version 0.5.0 (3986 buckets, 15944 max)
  175. nf_conntrack_rtsp v0.6.21 loading
  176. xt_time: kernel timezone is -0000
  177. ip_set: protocol 6
  178. gre: GRE over IPv4 demultiplexor driver
  179. nf_nat_rtsp v0.6.21 loading
  180. ip_tables: (C) 2000-2006 Netfilter Core Team
  181. TCP: bic registered
  182. TCP: cubic registered
  183. TCP: westwood registered
  184. TCP: highspeed registered
  185. TCP: hybla registered
  186. TCP: htcp registered
  187. TCP: vegas registered
  188. TCP: veno registered
  189. TCP: scalable registered
  190. TCP: lp registered
  191. TCP: yeah registered
  192. TCP: illinois registered
  193. NET: Registered protocol family 17
  194. Bridge firewalling registered
  195. 8021q: 802.1Q VLAN Support v1.8
  196. Key type encrypted registered
  197. Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2 012
  198. NAND device: Manufacturer ID: 0xc2, Chip ID: 0xf1 (Macronix NAND 128MiB 3,3V 8-b it), 128MiB, page size: 2048, OOB size: 64
  199. Spare area=64 eccbytes 56, ecc bytes located at:
  200. 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26 27 28 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59 60 61 62 63
  201. Available 7 bytes at (off,len):
  202. (1,1) (16,2) (32,2) (48,2) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) ( 0,0) (0,0) (0,0) (0,0) (0,0) (0,0)
  203. Driver must set ecc.strength when using hardware ECC
  204. Scanning device for bad blocks
  205. Bad eraseblock 32 at 0x000000400000
  206. Bad eraseblock 44 at 0x000000580000
  207. Bad eraseblock 47 at 0x0000005e0000
  208. Bad eraseblock 51 at 0x000000660000
  209. Bad eraseblock 72 at 0x000000900000
  210. Bad eraseblock 92 at 0x000000b80000
  211. Bad eraseblock 147 at 0x000001260000
  212. Bad eraseblock 359 at 0x000002ce0000
  213. Bad eraseblock 420 at 0x000003480000
  214. Bad eraseblock 450 at 0x000003840000
  215. Bad eraseblock 469 at 0x000003aa0000
  216. Bad eraseblock 558 at 0x0000045c0000
  217. Bad eraseblock 867 at 0x000006c60000
  218. Bad eraseblock 985 at 0x000007b20000
  219. Options: NO_SUBPAGE_WRITE,
  220. Creating 1 MTD partitions on "brcmnand":
  221. 0x000002000000-0x000008000000 : "ddwrt"
  222. VFS: Cannot open root device "mtdblock3" or unknown-block(31,3): error -19
  223. Please append a correct "root=" boot option; here are the available partitions:
  224. 1f00 512 mtdblock0 (driver?)
  225. 1f01 1536 mtdblock1 (driver?)
  226. 1f02 29184 mtdblock2 (driver?)
  227. 1f03 27520 mtdblock3 (driver?)
  228. 1f04 128 mtdblock4 (driver?)
  229. 1f05 98304 mtdblock5 (driver?)
  230. Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,3)
  231. CPU1: stopping
  232. CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.10.52 #254
  233. Backtrace:
  234. [<c0015dd8>] (dump_backtrace+0x0/0x114) from [<c0015fdc>] (show_stack+0x18/0x1c)
  235. r6:00000000 r5:00000001 r4:c04371b0 r3:00000000
  236. [<c0015fc4>] (show_stack+0x0/0x1c) from [<c0132fd0>] (dump_stack+0x24/0x28)
  237. [<c0132fac>] (dump_stack+0x0/0x28) from [<c00178e4>] (handle_IPI+0xe4/0x130)
  238. [<c0017800>] (handle_IPI+0x0/0x130) from [<c00086c0>] (gic_handle_irq+0x60/0x64)
  239. r6:c7857f70 r5:c040e640 r4:f010010c r3:c00139ac
  240. [<c0008660>] (gic_handle_irq+0x0/0x64) from [<c0008840>] (__irq_svc+0x40/0x50)
  241. Exception stack(0xc7857f70 to 0xc7857fb8)
  242. 7f60: c16af778 00000000 00000c50 00000000
  243. 7f80: c7856008 c040e470 c0362dd8 c7856000 c0415c27 c0415c27 c7856000 c7857fc4
  244. 7fa0: c7857fc8 c7857fb8 c00139ac c00139b0 60000113 ffffffff
  245. r7:c7857fa4 r6:ffffffff r5:60000113 r4:c00139b0
  246. [<c0013980>] (arch_cpu_idle+0x0/0x34) from [<c005f1b4>] (cpu_startup_entry+0xe0/ 0x120)
  247. [<c005f0d4>] (cpu_startup_entry+0x0/0x120) from [<c03da864>] (secondary_start_ke rnel+0x128/0x130)
  248. r7:c04371a8 r3:00000002
  249. [<c03da73c>] (secondary_start_kernel+0x0/0x130) from [<003d9f00>] (0x3d9f00)
  250. r4:0783806a r3:c03d9ee8
  251. Rebooting in 10 seconds..
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement