* ERROR: x11-libs/libdrm-2.4.25 failed (compile phase):
 *   emake failed
 *
 * If you need support, post the output of 'emerge --info =x11-libs/libdrm-2.4.25',
 * the complete build log and the output of 'emerge -pqv =x11-libs/libdrm-2.4.25'.
 * The complete build log is located at '/var/tmp/portage/x11-libs/libdrm-2.4.25/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/x11-libs/libdrm-2.4.25/temp/environment'.
 * S: '/var/tmp/portage/x11-libs/libdrm-2.4.25/work/libdrm-2.4.25'

>>> Failed to emerge x11-libs/libdrm-2.4.25, Log file:

>>>  '/var/tmp/portage/x11-libs/libdrm-2.4.25/temp/build.log'
*** Resuming merge...

These are the packages that would be merged, in order:

Calculating dependencies... done!

 * Messages for package app-arch/xz-utils-5.0.2:

 * Old versions of installed libraries were detected on your system.
 * In order to avoid breaking packages that depend on these old libs,
 * the libraries are not being removed.  You need to run revdep-rebuild
 * in order to remove these old dependencies.  If you do not have this
 * helper program, simply emerge the 'gentoolkit' package.
 *
 *   # revdep-rebuild --library '/usr/lib64/liblzma.so.0'
 *
 * Once you've finished running revdep-rebuild, it should be safe to
 * delete the old libraries.  Here is a copy & paste for the lazy:
 *   # rm '/usr/lib64/liblzma.so.0'

 * Messages for package dev-libs/gmp-5.0.1:

 * Old versions of installed libraries were detected on your system.
 * In order to avoid breaking packages that depend on these old libs,
 * the libraries are not being removed.  You need to run revdep-rebuild
 * in order to remove these old dependencies.  If you do not have this
 * helper program, simply emerge the 'gentoolkit' package.
 *
 *   # revdep-rebuild --library '/usr/lib64/libgmp.so.3'
 *
 * Once you've finished running revdep-rebuild, it should be safe to
 * delete the old libraries.  Here is a copy & paste for the lazy:
 *   # rm '/usr/lib64/libgmp.so.3'

 * Messages for package sys-libs/timezone-data-2011e:

 * You do not have TIMEZONE set in /etc/timezone.
 * Skipping auto-update of /etc/localtime.

 * Messages for package app-portage/portage-utils-0.5:

 * /etc/portage/postsync.d/q-reinitialize has been installed for convenience
 * If you wish for it to be automatically run at the end of every --sync:
 *    # chmod +x /etc/portage/postsync.d/q-reinitialize
 * Normally this should only take a few seconds to run but file systems
 * such as ext3 can take a lot longer.  To disable, simply do:
 *    # chmod -x /etc/portage/postsync.d/q-reinitialize

 * Messages for package net-misc/dhcpcd-5.2.12:

 * You have installed dhcpcd with zeroconf support.
 * This means that it will always obtain an IP address even if no
 * DHCP server can be contacted, which will break any existing
 * failover support you may have configured in your net configuration.
 * This behaviour can be controlled with the -L flag.
 * See the dhcpcd man page for more details.
 *
 * Users upgrading from 4.0 series should pay attention to removal
 * of compat useflag. This changes behavior of dhcp in wide manner:
 * dhcpcd no longer sends a default ClientID for ethernet interfaces.
 * This is so we can re-use the address the kernel DHCP client found.
 * To retain the old behaviour of sending a default ClientID based on the
 * hardware address for interface, simply add the keyword clientid
 * to dhcpcd.conf or use commandline parameter -I ''
 *
 * Also, users upgrading from 4.0 series should be aware that
 * the -N, -R and -Y command line options no longer exist.
 * These are controled now by nohook options in dhcpcd.conf.

 * Messages for package sys-power/acpid-2.0.8:

 *
 * You may wish to read the Gentoo Linux Power Management Guide,
 * which can be found online at:
 * http://www.gentoo.org/doc/en/power-management-guide.xml
 *

 * Messages for package sys-process/cronbase-0.3.3:

 * Forcing proper permissions on
 * /etc/cron.{hourly,daily,weekly,monthly},
 * /var/spool/cron/ and /var/spool/cron/lastrun/

 * Messages for package sys-apps/pciutils-3.1.7:

 * Providing a backwards compatibility non-compressed pci.ids
 * The 'pcimodules' program has been replaced by 'lspci -k'

 * Messages for package dev-libs/mpfr-3.0.1:

 * Old versions of installed libraries were detected on your system.
 * In order to avoid breaking packages that depend on these old libs,
 * the libraries are not being removed.  You need to run revdep-rebuild
 * in order to remove these old dependencies.  If you do not have this
 * helper program, simply emerge the 'gentoolkit' package.
 *
 *   # revdep-rebuild --library 'libmpfr.so.1'
 *
 * Once you've finished running revdep-rebuild, it should be safe to
 * delete the old libraries.  Here is a copy & paste for the lazy:
 *   # rm '/usr/lib64/libmpfr.so.1'

 * Messages for package app-text/iso-codes-3.24.2:

 * Sorry, but iso-codes does not support the LINGUAS: en_US en
 * Sorry, but iso-codes does not support the LINGUAS: en_US en
 * Sorry, but iso-codes does not support the LINGUAS: en_US
 * Sorry, but iso-codes does not support the LINGUAS: en_US en
 * Sorry, but iso-codes does not support the LINGUAS: en_US en
 * Sorry, but iso-codes does not support the LINGUAS: en_US en

 * Messages for package sys-apps/attr-2.4.44-r1:

 * Sorry, but attr does not support the LINGUAS: en_US en

 * Messages for package sys-apps/acl-2.2.49-r1:

 * Sorry, but acl does not support the LINGUAS: en_US en

 * Messages for package sys-apps/coreutils-8.11:

 * Make sure you run 'hash -r' in your active shells.
 * You should also re-source your shell settings for LS_COLORS
 *   changes, such as: source /etc/profile

 * Messages for package net-misc/wget-1.12-r3:

 * The /etc/wget/wgetrc file has been relocated to /etc/wgetrc

 * Messages for package sys-auth/pambase-20101024:

 * Starting from version 20080801, pambase optionally enables
 * SHA512-hashed passwords. For this to work, you need sys-libs/pam-1.0.1
 * built against sys-libs/glibc-2.7 or later.
 * If you don't have support for this, it will automatically fallback
 * to MD5-hashed passwords, just like before.
 *
 * Please note that the change only affects the newly-changed passwords
 * and that SHA512-hashed passwords will not work on earlier versions
 * of glibc or Linux-PAM.

 * Messages for package media-gfx/exiv2-0.21.1:

 *
 * PLEASE PLEASE take note of this:
 * Please make *sure* to run revdep-rebuild now
 * Certain things on your system may have linked against a
 * different version of exiv2 -- those things need to be
 * recompiled. Sorry for the inconvenience!
 *

 * Messages for package x11-libs/libX11-1.4.3:

 * QA: CONFIGURE_OPTIONS are deprecated. Please migrate to XORG_CONFIGURE_OPTIONS to preserve namespace.

 * Messages for package x11-proto/xproto-7.0.21:

 * QA: CONFIGURE_OPTIONS are deprecated. Please migrate to XORG_CONFIGURE_OPTIONS to preserve namespace.

 * Messages for package x11-proto/xextproto-7.2.0:

 * QA: CONFIGURE_OPTIONS are deprecated. Please migrate to XORG_CONFIGURE_OPTIONS to preserve namespace.

 * Messages for package sys-apps/dbus-1.4.8:

 * To start the D-Bus system-wide messagebus by default
 * you should add it to the default runlevel :
 * `rc-update add dbus default`
 *
 * Some applications require a session bus in addition to the system
 * bus. Please see `man dbus-launch` for more information.
 *
 * You must restart D-Bus `/etc/init.d/dbus restart` to run
 * the new version of the daemon.
 * Don't do this while X is running because it will restart your X as well.

 * Messages for package x11-libs/xtrans-1.2.6:

 * QA: CONFIGURE_OPTIONS are deprecated. Please migrate to XORG_CONFIGURE_OPTIONS to preserve namespace.

 * Messages for package dev-lang/python-2.7.1-r1:

 *
 * ************************************************************************
 *
 * You have just upgraded from an older version of Python.
 * You should run 'python-updater ${options}' to rebuild Python modules.
 *
 * ************************************************************************
 *

 * Messages for package x11-libs/libICE-1.0.7:

 * QA: CONFIGURE_OPTIONS are deprecated. Please migrate to XORG_CONFIGURE_OPTIONS to preserve namespace.

 * Messages for package sys-devel/binutils-2.21:

 * Sorry, but binutils does not support the LINGUAS: en_US en

 * Messages for package x11-libs/libXi-1.4.2:

 * QA: CONFIGURE_OPTIONS are deprecated. Please migrate to XORG_CONFIGURE_OPTIONS to preserve namespace.
 * Some special keys and keyboard layouts may stop working.
 * To fix them, recompile xorg-server.

 * Messages for package x11-libs/libdrm-2.4.25:

 * QA: CONFIGURE_OPTIONS are deprecated. Please migrate to XORG_CONFIGURE_OPTIONS to preserve namespace.
 * ERROR: x11-libs/libdrm-2.4.25 failed (compile phase):
 *   emake failed
 *
 * If you need support, post the output of 'emerge --info =x11-libs/libdrm-2.4.25',
 * the complete build log and the output of 'emerge -pqv =x11-libs/libdrm-2.4.25'.
 * The complete build log is located at '/var/tmp/portage/x11-libs/libdrm-2.4.25/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/x11-libs/libdrm-2.4.25/temp/environment'.
 * S: '/var/tmp/portage/x11-libs/libdrm-2.4.25/work/libdrm-2.4.25'
 * One or more packages are either masked or have missing dependencies:
 *
 *   >=media-libs/mesa-7.8_rc[nptl] pulled in by:
 *     (x11-base/xorg-server-1.9.4, installed)
 *
 *   media-libs/mesa pulled in by:
 *     (app-emulation/emul-linux-x86-opengl-20110129-r1, installed)
 *
 *   media-libs/mesa pulled in by:
 *     (virtual/opengl-7.0, installed)
 *
 *   media-libs/mesa pulled in by:
 *     (virtual/glu-7.0, installed)
 *
 * The resume list contains packages that are either masked or have
 * unsatisfied dependencies. Please restart/continue the operation
 * manually, or use --skipfirst to skip the first package in the list and
 * any other packages that may be masked or have missing dependencies.
 *
 * The following package has failed to build or install:
 *
 *  (x11-libs/libdrm-2.4.25, ebuild scheduled for merge), Log file:
 *   '/var/tmp/portage/x11-libs/libdrm-2.4.25/temp/build.log'
 *

 * Regenerating GNU info directory index...
 * Processed 131 info files.

 * IMPORTANT: 8 config files in '/etc' need updating.
 * See the CONFIGURATION FILES section of the emerge
 * man page to learn how to update config files.
 * After world updates, it is important to remove obsolete packages with
 * emerge --depclean. Refer to `man emerge` for more information.
localhost pottzie #