API tools faq
paste
Advertisement
chemik582

Turris-1.0

chemik582
May 15th, 2018
176
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 68.52 KB | None | 0 0
raw download clone embed print report
  1. chemik@HP-6710b ~ $ minicom -D /dev/ttyUSB0
  2.  
  3.  
  4. Vítejte v programu minicom 2.7
  5.  
  6. VOLBY: I18n
  7. Datum překladu programu: Jan 1 2014, 17:13:22.
  8. Port /dev/ttyUSB0, 18:45:20
  9.  
  10. Stiskněte CTRL-A Z pro nápovědu o klávesách se zvláštním významem
  11.  
  12.  
  13.  
  14. U-Boot 2015.04-04654-gbcfb33e-dirty (Jun 26 2015 - 12:50:49)
  15.  
  16. CPU0: P2020E, Version: 2.1, (0x80ea0021)
  17. Core: e500, Version: 5.1, (0x80211051)
  18. Clock Configuration:
  19. CPU0:1200 MHz, CPU1:1200 MHz,
  20. CCB:600 MHz,
  21. DDR:400 MHz (800 MT/s data rate) (Asynchronous), LBC:37.500 MHz
  22. L1: D-cache 32 KiB enabled
  23. I-cache 32 KiB enabled
  24. wdt status 00000005 reset
  25. Watchdog enabled
  26. Board: TURRIS CPLD: V4.1 PCBA: V4.0
  27. Error, wrong i2c adapter 2 max 2 possible
  28. in: 56
  29. out: 0
  30. io_config: 255
  31. rom_loc: nor upper bank
  32. SD/MMC : 4-bit Mode
  33. eSPI : Enabled
  34. I2C: Error, wrong i2c adapter 2 max 2 possible
  35. ready
  36. SPI: ready
  37. DRAM: Error, wrong i2c adapter 2 max 2 possible
  38. Detected UDIMM 9905428-181.A00LF
  39. WARNING: Calling __hwconfig without a buffer and before environment is ready
  40. WARNING: Calling __hwconfig without a buffer and before environment is ready
  41. 2 GiB (DDR3, 64-bit, CL=6, ECC off)
  42. Flash: 16 MiB
  43. L2: 512 KiB enabled
  44. NAND: 256 MiB
  45. MMC: FSL_SDHC: 0
  46. PCIe1: Root Complex of mini PCIe SLOT, no link, regs @ 0xffe0a000
  47. PCIe1: Bus 00 - 00
  48. PCIe2: Root Complex of PCIe SLOT, x1 gen1, regs @ 0xffe09000
  49. 02:00.0 - 168c:0030 - Network controller
  50. PCIe2: Bus 01 - 02
  51. PCIe3: Root Complex of PCIe SLOT, no link, regs @ 0xffe08000
  52. PCIe3: Bus 03 - 03
  53. Error, wrong i2c adapter 2 max 2 possible
  54. In: serial
  55. Out: serial
  56. Err: serial
  57. Net: Phy 5 not found
  58. PHY reset timed out
  59. eTSEC1
  60. Error: eTSEC1 address not set.
  61. , eTSEC2
  62. Error: eTSEC2 address not set.
  63. , eTSEC3 [PRIME]
  64. Error: eTSEC3 address not set.
  65.  
  66. Hit any key to stop autoboot: 0
  67. BOOT NAND
  68. mmc - MMC sub system
  69.  
  70. Usage:
  71. mmc info - display info of the current MMC device
  72. mmc read addr blk# cnt
  73. mmc write addr blk# cnt
  74. mmc erase blk# cnt
  75. mmc rescan
  76. mmc part - lists available partition on current mmc device
  77. mmc dev [dev] [part] - show or set current mmc device [partition]
  78. mmc list - lists available devices
  79. mmc hwpartition [args...] - does hardware partitioning
  80. arguments (sizes in 512-byte blocks):
  81. [user [enh start cnt] [wrrel {on|off}]] - sets user data area attributes
  82. [gp1|gp2|gp3|gp4 cnt [enh] [wrrel {on|off}]] - general purpose partition
  83. [check|set|complete] - mode, complete set partitioning completed
  84. WARNING: Partitioning is a write-once setting once it is set to complete.
  85. Power cycling is required to initialize partitions after set to complete.
  86. mmc setdsr <value> - set DSR register value
  87.  
  88. reading zImage
  89. 3274013 bytes read in 152 ms (20.5 MiB/s)
  90. wdt status 00000003
  91. reading fdt
  92. 12945 bytes read in 13 ms (971.7 KiB/s)
  93. WARNING: adjusting available memory to 30000000
  94. ## Booting kernel from Legacy Image at 02100000 ...
  95. Image Name: Linux-4.4.119-df8c454b3cdf471ca0
  96. Created: 2018-03-02 13:26:34 UTC
  97. Image Type: PowerPC Linux Kernel Image (gzip compressed)
  98. Data Size: 3273949 Bytes = 3.1 MiB
  99. Load Address: 00000000
  100. Entry Point: 00000000
  101. Verifying Checksum ... OK
  102. ## Flattened Device Tree blob at 02000000
  103. Booting using the fdt blob at 0x2000000
  104. Uncompressing Kernel Image ... OK
  105. Loading Device Tree to 03ff9000, end 03fff290 ... OK
  106. WARNING: could not find compatible node fsl-usb2-dr
  107. [ 0.000000] Using P2020 RDB machine description
  108. [ 0.000000] Memory CAM mapping: 256/256 Mb, residual: 1536Mb
  109. [ 0.000000] Initializing cgroup subsys cpuset
  110. [ 0.000000] Initializing cgroup subsys cpu
  111. [ 0.000000] Initializing cgroup subsys cpuacct
  112. [ 0.000000] Linux version 4.4.119-df8c454b3cdf471ca0ef3e4df07c2cb7-0 (beast@build) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r4708
  113. [ 0.000000] CPU maps initialized for 1 thread per core
  114. [ 0.000000] bootconsole [udbg0] enabled
  115. setup_arch: initmem
  116. mpc85xx_rdb_setup_arch()
  117. [ 0.000000] mpc85xx_qe_init: Could not find Quicc Engine node
  118. [ 0.000000] MPC85xx RDB board from Freescale Semiconductor
  119. arch: exit
  120. [ 0.000000] Zone ranges:
  121. [ 0.000000] DMA [mem 0x0000000000000000-0x000000001fffffff]
  122. [ 0.000000] Normal empty
  123. [ 0.000000] HighMem [mem 0x0000000020000000-0x000000007fffffff]
  124. [ 0.000000] Movable zone start for each node
  125. [ 0.000000] Early memory node ranges
  126. [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff]
  127. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
  128. [ 0.000000] MMU: Allocated 1088 bytes of context maps for 255 contexts
  129. [ 0.000000] PERCPU: Embedded 10 pages/cpu @dedc2000 s9260 r8192 d23508 u40960
  130. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 523136
  131. [ 0.000000] Kernel command line: root=/dev/mmcblk0p2 rootwait rw rootfstype=btrfs rootflags=subvol=@,commit=5 console=ttyS0,115200
  132. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  133. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  134. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  135. [ 0.000000] Sorting __ex_table...
  136. [ 0.000000] Memory: 2005408K/2097152K available (4976K kernel code, 176K rwdata, 1088K rodata, 192K init, 259K bss, 91744K reserved, 0K cm)
  137. [ 0.000000] Kernel virtual memory layout:
  138. [ 0.000000] * 0xfffbf000..0xfffff000 : fixmap
  139. [ 0.000000] * 0xffc00000..0xffe00000 : highmem PTEs
  140. [ 0.000000] * 0xffbfd000..0xffc00000 : early ioremap
  141. [ 0.000000] * 0xe1000000..0xffbfd000 : vmalloc & ioremap
  142. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  143. [ 0.000000] Hierarchical RCU implementation.
  144. [ 0.000000] NR_IRQS:512 nr_irqs:512 16
  145. [ 0.000000] mpic: Setting up MPIC " OpenPIC " version 1.2 at ffe40000, max 2 CPUs
  146. [ 0.000000] mpic: ISU size: 256, shift: 8, mask: ff
  147. [ 0.000000] mpic: Initializing for 256 sources
  148. [ 0.000000] mpc85xx_rdb_pic_init: Could not find qe-ic node
  149. [ 0.000008] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x114c1bade8, max_idle_ns: 440795203839 ns
  150. [ 0.010277] clocksource: timebase mult[d555555] shift[24] registered
  151. [ 0.016659] pid_max: default: 32768 minimum: 301
  152. [ 0.021304] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  153. [ 0.027843] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  154. [ 0.035242] Initializing cgroup subsys io
  155. [ 0.039180] Initializing cgroup subsys memory
  156. [ 0.043530] Initializing cgroup subsys devices
  157. [ 0.047952] Initializing cgroup subsys freezer
  158. [ 0.052385] Initializing cgroup subsys net_cls
  159. [ 0.056939] mpic: requesting IPIs...
  160. [ 0.061312] Brought up 2 CPUs
  161. [ 0.066269] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
  162. [ 0.075946] futex hash table entries: 512 (order: 2, 16384 bytes)
  163. [ 0.082113] xor: measuring software checksum speed
  164. [ 0.096869] 8regs : 1472.000 MB/sec
  165. [ 0.111004] 8regs_prefetch: 1312.000 MB/sec
  166. [ 0.125486] 32regs : 1472.000 MB/sec
  167. [ 0.139620] 32regs_prefetch: 1356.000 MB/sec
  168. [ 0.144151] xor: using function: 32regs (1472.000 MB/sec)
  169. [ 0.149867] NET: Registered protocol family 16
  170. [ 0.157251] cpuidle: using governor ladder
  171.  
  172. [ 0.167493] Found FSL PCI host bridge at 0x00000000ffe08000. Firmware bus number: 0->0
  173. [ 0.175344] PCI host bridge /pcie@ffe08000 (primary) ranges:
  174. [ 0.180989] MEM 0x00000000c0000000..0x00000000dfffffff -> 0x00000000c0000000
  175. [ 0.188201] IO 0x00000000ffc20000..0x00000000ffc2ffff -> 0x0000000000000000
  176. [ 0.195340] /pcie@ffe08000: PCICSRBAR @ 0xfff00000
  177. [ 0.200110] setup_pci_atmu: end of DRAM 80000000
  178. [ 0.204970] Found FSL PCI host bridge at 0x00000000ffe09000. Firmware bus number: 0->1
  179. [ 0.212810] PCI host bridge /pcie@ffe09000 ranges:
  180. [ 0.217678] MEM 0x00000000a0000000..0x00000000bfffffff -> 0x00000000a0000000
  181. [ 0.224892] IO 0x00000000ffc10000..0x00000000ffc1ffff -> 0x0000000000000000
  182. [ 0.232028] /pcie@ffe09000: PCICSRBAR @ 0xfff00000
  183. [ 0.236800] setup_pci_atmu: end of DRAM 80000000
  184. [ 0.241652] Found FSL PCI host bridge at 0x00000000ffe0a000. Firmware bus number: 0->0
  185. [ 0.249492] PCI host bridge /pcie@ffe0a000 ranges:
  186. [ 0.254360] MEM 0x0000000080000000..0x000000009fffffff -> 0x0000000080000000
  187. [ 0.261573] IO 0x00000000ffc00000..0x00000000ffc0ffff -> 0x0000000000000000
  188. [ 0.268710] /pcie@ffe0a000: PCICSRBAR @ 0xfff00000
  189. [ 0.273482] setup_pci_atmu: end of DRAM 80000000
  190. [ 0.286835] PCI: Probing PCI hardware
  191. [ 0.290569] fsl-pci ffe08000.pcie: PCI host bridge to bus 0000:00
  192. [ 0.296590] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
  193. [ 0.302755] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
  194. [ 0.309624] pci_bus 0000:00: root bus resource [bus 00-ff]
  195. [ 0.315393] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  196. [ 0.323410] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
  197. [ 0.328749] fsl-pci ffe09000.pcie: PCI host bridge to bus 0001:02
  198. [ 0.334769] pci_bus 0001:02: root bus resource [io 0x20000-0x2ffff] (bus address [0x0000-0xffff])
  199. [ 0.343718] pci_bus 0001:02: root bus resource [mem 0xa0000000-0xbfffffff]
  200. [ 0.350586] pci_bus 0001:02: root bus resource [bus 02-ff]
  201. [ 0.356300] pci 0001:02:00.0: Primary bus is hard wired to 0
  202. [ 0.361883] pci 0001:02:00.0: bridge configuration invalid ([bus 01-01]), reconfiguring
  203. [ 0.371902] pci 0001:02:00.0: PCI bridge to [bus 03-ff]
  204. [ 0.377256] fsl-pci ffe0a000.pcie: PCI host bridge to bus 0002:04
  205. [ 0.383280] pci_bus 0002:04: root bus resource [io 0x40000-0x4ffff] (bus address [0x0000-0xffff])
  206. [ 0.392225] pci_bus 0002:04: root bus resource [mem 0x80000000-0x9fffffff]
  207. [ 0.399092] pci_bus 0002:04: root bus resource [bus 04-ff]
  208. [ 0.404814] pci 0002:04:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  209. [ 0.412827] pci 0002:04:00.0: PCI bridge to [bus 05-ff]
  210. [ 0.418059] PCI: Cannot allocate resource region 0 of PCI bridge 1, will remap
  211. [ 0.425210] PCI: Cannot allocate resource region 0 of device 0000:00:00.0, will remap
  212. [ 0.433029] PCI: Cannot allocate resource region 0 of device 0001:02:00.0, will remap
  213. [ 0.440853] PCI: Cannot allocate resource region 0 of device 0002:04:00.0, will remap
  214. [ 0.448709] pci 0000:00:00.0: BAR 0: no space for [mem size 0x00100000]
  215. [ 0.455282] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x00100000]
  216. [ 0.462237] pci 0000:00:00.0: PCI bridge to [bus 01]
  217. [ 0.467192] pci 0000:00:00.0: bridge window [mem 0xc0000000-0xdfffffff]
  218. [ 0.473973] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc
  219. [ 0.483045] pci 0001:02:00.0: BAR 0: no space for [mem size 0x00100000]
  220. [ 0.489620] pci 0001:02:00.0: BAR 0: failed to assign [mem size 0x00100000]
  221. [ 0.496579] pci 0001:03:00.0: BAR 6: assigned [mem 0xa0020000-0xa002ffff pref]
  222. [ 0.503795] pci 0001:02:00.0: PCI bridge to [bus 03]
  223. [ 0.508746] pci 0001:02:00.0: bridge window [io 0x20000-0x2ffff]
  224. [ 0.515005] pci 0001:02:00.0: bridge window [mem 0xa0000000-0xbfffffff]
  225. [ 0.521786] pci_bus 0001:02: Some PCI device resources are unassigned, try booting with pci=realloc
  226. [ 0.530865] pci 0002:04:00.0: BAR 0: no space for [mem size 0x00100000]
  227. [ 0.537434] pci 0002:04:00.0: BAR 0: failed to assign [mem size 0x00100000]
  228. [ 0.544388] pci 0002:04:00.0: PCI bridge to [bus 05]
  229. [ 0.549343] pci 0002:04:00.0: bridge window [io 0x40000-0x4ffff]
  230. [ 0.555603] pci 0002:04:00.0: bridge window [mem 0x80000000-0x9fffffff]
  231. [ 0.562384] pci_bus 0002:04: Some PCI device resources are unassigned, try booting with pci=realloc
  232. [ 0.571703] mpic-msgr ffe41400.message: Found 0 message registers
  233. [ 0.577720] mpic-msgr ffe41400.message: Of-device full name /soc@ffe00000/message@41400
  234. [ 0.585724] mpic-msgr ffe41400.message: Failed to find message register block alias
  235. [ 0.618258] raid6: int32x1 gen() 171 MB/s
  236. [ 0.639528] raid6: int32x1 xor() 224 MB/s
  237. [ 0.660841] raid6: int32x2 gen() 300 MB/s
  238. [ 0.682157] raid6: int32x2 xor() 275 MB/s
  239. [ 0.703461] raid6: int32x4 gen() 398 MB/s
  240. [ 0.724781] raid6: int32x4 xor() 289 MB/s
  241. [ 0.746141] raid6: int32x8 gen() 378 MB/s
  242. [ 0.767437] raid6: int32x8 xor() 251 MB/s
  243. [ 0.771622] raid6: using algorithm int32x4 gen() 398 MB/s
  244. [ 0.777011] raid6: .... xor() 289 MB/s, rmw enabled
  245. [ 0.781879] raid6: using intx1 recovery algorithm
  246. [ 0.787792] clocksource: Switched to clocksource timebase
  247. [ 0.793994] NET: Registered protocol family 2
  248. [ 0.798622] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  249. [ 0.805625] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  250. [ 0.812065] TCP: Hash tables configured (established 4096 bind 4096)
  251. [ 0.818433] UDP hash table entries: 256 (order: 1, 8192 bytes)
  252. [ 0.824217] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  253. [ 0.830570] NET: Registered protocol family 1
  254. [ 0.840735] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  255. [ 0.846655] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZO) (LZMA) (RTIME) (RUBIN) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  256. [ 0.859247] bounce: pool size: 64 pages
  257. [ 0.863052] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  258. [ 0.870399] io scheduler noop registered
  259. [ 0.874306] io scheduler deadline registered (default)
  260. [ 0.879709] pcieport 0001:02:00.0: enabling device (0106 -> 0107)
  261. [ 0.885864] pcieport 0002:04:00.0: enabling device (0106 -> 0107)
  262. [ 0.892196] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
  263. [ 0.899114] pcieport 0001:02:00.0: Signaling PME through PCIe PME interrupt
  264. [ 0.906036] pci 0001:03:00.0: Signaling PME through PCIe PME interrupt
  265. [ 0.912589] pcieport 0002:04:00.0: Signaling PME through PCIe PME interrupt
  266. [ 0.945230] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  267. [ 0.953546] console [ttyS0] disabled
  268. [ 0.957067] serial8250.0: ttyS0 at MMIO 0xffe04500 (irq = 42, base_baud = 37500000) is a 16550A
  269. [ 0.965747] console [ttyS0] enabled
  270. [ 0.965747] console [ttyS0] enabled
  271. [ 0.972691] bootconsole [udbg0] disabled
  272. [ 0.972691] bootconsole [udbg0] disabled
  273. [ 0.980876] serial8250.0: ttyS1 at MMIO 0xffe04600 (irq = 42, base_baud = 37500000) is a 16550A
  274. [ 0.990133] console [ttyS0] disabled
  275. [ 0.993744] console [ttyS0] enabled
  276. [ 0.997637] ffe04600.serial: ttyS1 at MMIO 0xffe04600 (irq = 42, base_baud = 37500000) is a 16550
  277. [ 1.007579] ef000000.nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x002101
  278. [ 1.017598] Amd/Fujitsu Extended Query Table at 0x0040
  279. [ 1.022765] Amd/Fujitsu Extended Query version 1.3.
  280. [ 1.027828] number of CFI chips: 1
  281. [ 1.031472] 6 ofpart partitions found on MTD device ef000000.nor
  282. [ 1.037499] Creating 6 MTD partitions on "ef000000.nor":
  283. [ 1.042819] 0x000000000000-0x000000020000 : "NOR (RO) DTB Image"
  284. [ 1.049397] 0x000000020000-0x0000001c0000 : "NOR (RO) Linux Kernel Image"
  285. [ 1.056819] 0x0000001c0000-0x000000340000 : "NOR (RO) JFFS2 Root File System"
  286. [ 1.064471] 0x000000340000-0x000000e40000 : "NOR (RO) NAND FW backup"
  287. [ 1.071426] 0x000000e40000-0x000000f00000 : "NOR (RW) Cert backup"
  288. [ 1.078141] 0x000000f00000-0x000001000000 : "NOR (RO) U-Boot Image"
  289. [ 1.085430] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
  290. [ 1.091812] nand: Micron MT29F2G08ABAEAWP
  291. [ 1.095834] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  292. [ 1.104746] Bad block table found at page 131008, version 0x01
  293. [ 1.111334] Bad block table found at page 130944, version 0x01
  294. [ 1.117739] 4 ofpart partitions found on MTD device ff800000.flash
  295. [ 1.123932] Creating 4 MTD partitions on "ff800000.flash":
  296. [ 1.129435] 0x000000000000-0x000000200000 : "NAND (RW) DTB Image"
  297. [ 1.136068] 0x000000200000-0x000000700000 : "NAND (RW) Linux Kernel Image"
  298. [ 1.143482] 0x000000700000-0x000010000000 : "NAND (RW) JFFS2 Root File System"
  299. [ 1.151437] 0x000000000000-0x000010000000 : "rootfs-ubifs"
  300. [ 1.157656] eLBC NAND device at 0xff800000, bank 1
  301. [ 1.162868] fsl_espi ffe07000.spi: cs=0, init_csmode=0x100008
  302. [ 1.168651] fsl_espi ffe07000.spi: cs=1, init_csmode=0x100008
  303. [ 1.174412] fsl_espi ffe07000.spi: cs=2, init_csmode=0x100008
  304. [ 1.180180] fsl_espi ffe07000.spi: cs=3, init_csmode=0x100008
  305. [ 1.186961] fsl_espi ffe07000.spi: at 0xe1130000 (irq = 59)
  306. [ 1.192947] libphy: Fixed MDIO Bus: probed
  307. [ 1.197242] libphy: Freescale PowerQUICC MII Bus: probed
  308. [ 1.205086] switch0: Atheros AR8337 rev. 2 switch registered on mdio@ffe24520
  309. [ 1.256517] fsl-gianfar ffe24000.ethernet: enabled errata workarounds, flags: 0x4
  310. [ 1.274453] fsl-gianfar ffe24000.ethernet eth0: mac: 00:00:00:00:00:00
  311. [ 1.280992] fsl-gianfar ffe24000.ethernet eth0: Running with NAPI enabled
  312. [ 1.287805] fsl-gianfar ffe24000.ethernet eth0: RX BD ring size for Q[0]: 256
  313. [ 1.294949] fsl-gianfar ffe24000.ethernet eth0: TX BD ring size for Q[0]: 256
  314. [ 1.302366] fsl-gianfar ffe25000.ethernet: enabled errata workarounds, flags: 0x4
  315. [ 1.320232] fsl-gianfar ffe25000.ethernet eth1: mac: 00:00:00:00:00:00
  316. [ 1.326790] fsl-gianfar ffe25000.ethernet eth1: Running with NAPI enabled
  317. [ 1.333586] fsl-gianfar ffe25000.ethernet eth1: RX BD ring size for Q[0]: 256
  318. [ 1.340743] fsl-gianfar ffe25000.ethernet eth1: TX BD ring size for Q[0]: 256
  319. [ 1.347957] fsl-gianfar ffe26000.ethernet: enabled errata workarounds, flags: 0x4
  320. [ 1.365837] fsl-gianfar ffe26000.ethernet eth2: mac: 00:00:00:00:00:00
  321. [ 1.372382] fsl-gianfar ffe26000.ethernet eth2: Running with NAPI enabled
  322. [ 1.379196] fsl-gianfar ffe26000.ethernet eth2: RX BD ring size for Q[0]: 256
  323. [ 1.386339] fsl-gianfar ffe26000.ethernet eth2: TX BD ring size for Q[0]: 256
  324. [ 1.393582] ucc_geth_driver: QE UCC Gigabit Ethernet Controller
  325. [ 1.399697] i2c /dev entries driver
  326. [ 1.403316] mpc-i2c ffe03000.i2c: timeout 1000000 us
  327. [ 1.410804] rtc-ds1307 0-006f: rtc core: registered mcp7940x as rtc0
  328. [ 1.417181] rtc-ds1307 0-006f: 64 bytes nvram
  329. [ 1.421728] mpc-i2c ffe03100.i2c: timeout 1000000 us
  330. [ 1.426961] booke_wdt: powerpc book-e watchdog driver loaded
  331. [ 1.432817] sdhci: Secure Digital Host Controller Interface driver
  332. [ 1.439006] sdhci: Copyright(c) Pierre Ossman
  333. [ 1.443384] sdhci-pltfm: SDHCI platform and OF driver helper
  334. [ 1.449184] /soc@ffe00000/sdhc@2e000: voltage-ranges unspecified
  335. [ 1.455224] sdhci-esdhc ffe2e000.sdhc: No vmmc regulator found
  336. [ 1.461063] sdhci-esdhc ffe2e000.sdhc: No vqmmc regulator found
  337. [ 1.489364] mmc0: SDHCI controller on ffe2e000.sdhc [ffe2e000.sdhc] using DMA
  338. [ 1.497230] NET: Registered protocol family 10
  339. [ 1.502279] NET: Registered protocol family 17
  340. [ 1.506782] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need thi.
  341. [ 1.519438] Bridge firewalling registered
  342. [ 1.523468] 8021q: 802.1Q VLAN Support v1.8
  343. [ 1.528463] BTRFS: using crc32c-generic for crc32c
  344. [ 1.534532] Btrfs loaded, integrity-checker=on
  345. [ 1.540443] rtc-ds1307 0-006f: setting system clock to 2018-05-15 16:59:22 UTC (1526403562)
  346. [ 1.549303] Waiting for root device /dev/mmcblk0p2...
  347. [ 1.564311] mmc0: new high speed SDHC card at address 59b4
  348. [ 1.570127] mmcblk0: mmc0:59b4 SMI 14.8 GiB
  349. [ 1.575603] mmcblk0: p1 p2
  350. [ 1.656254] BTRFS: device fsid 189b6566-ec9f-49eb-b271-41b01176086e devid 1 transid 976139 /dev/root
  351. [ 1.666745] BTRFS info (device mmcblk0p2): disk space caching is enabled
  352. [ 1.673461] BTRFS: has skinny extents
  353. [ 1.695525] BTRFS: detected SSD devices, enabling SSD mode
  354. [ 1.743394] VFS: Mounted root (btrfs filesystem) on device 0:13.
  355. [ 1.749655] Freeing unused kernel memory: 192K
  356. [ 1.876792] init: Console is alive
  357. [ 1.880325] init: - watchdog -
  358. [ 2.925453] usbcore: registered new interface driver usbfs
  359. [ 2.931011] usbcore: registered new interface driver hub
  360. [ 2.936394] usbcore: registered new device driver usb
  361. [ 2.943082] Button Hotplug driver version 0.4.1
  362. [ 2.949536] exFAT: Version 1.2.9
  363. [ 2.978840] JFS: nTxBlock = 8192, nTxLock = 65536
  364. [ 3.010549] SGI XFS with security attributes, no debug enabled
  365. [ 3.022679] SCSI subsystem initialized
  366. [ 3.028758] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  367. [ 3.035744] ehci-platform: EHCI generic platform driver
  368. [ 3.041550] ehci-fsl: Freescale EHCI Host controller driver
  369. [ 3.047199] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
  370. [ 3.053843] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
  371. [ 3.061132] fsl-ehci fsl-ehci.0: irq 28, io mem 0xffe22000
  372. [ 3.072362] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
  373. [ 3.078381] hub 1-0:1.0: USB hub found
  374. [ 3.082160] hub 1-0:1.0: 1 port detected
  375. [ 3.095229] uhci_hcd: USB Universal Host Controller Interface driver
  376. [ 3.108305] usbcore: registered new interface driver usb-storage
  377. [ 3.387365] usb 1-1: new high-speed USB device number 2 using fsl-ehci
  378. [ 3.508115] hub 1-1:1.0: USB hub found
  379. [ 3.512017] hub 1-1:1.0: 2 ports detected
  380. [ 3.883862] init: - preinit -
  381. ifconfig: SIOCSIFFLAGS: Cannot assign requested address
  382. sendto(): Network is unrea[ 4.538892] random: mktemp: uninitialized urandom read (6 bytes read, 90 bits of entropy available)
  383. chable
  384. [ 4.549956] random: mktemp: uninitialized urandom read (6 bytes read, 91 bits of entropy available)
  385. [ 4.560848] random: mktemp: uninitialized urandom read (6 bytes read, 91 bits of entropy available)
  386. Press the [f] key and hit [enter] to enter failsafe mode
  387. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  388. [ 6.743902] random: nonblocking pool is initialized
  389. [ 606.723368] mmc0: Card stuck in programming state! mmcblk0 card_busy_detect
  390. [ 606.779030] mmc0: tried to reset card
  391. [ 1206.786363] mmc0: Card stuck in programming state! mmcblk0 card_busy_detect
  392. [ 1206.793379] blk_update_request: I/O error, dev mmcblk0, sector 772128
  393. [ 1206.799834] blk_update_request: I/O error, dev mmcblk0, sector 772136
  394. [ 1206.806281] blk_update_request: I/O error, dev mmcblk0, sector 772144
  395. [ 1206.812728] blk_update_request: I/O error, dev mmcblk0, sector 772152
  396. [ 1206.819174] blk_update_request: I/O error, dev mmcblk0, sector 772160
  397. [ 1206.825620] blk_update_request: I/O error, dev mmcblk0, sector 772168
  398. [ 1206.832066] blk_update_request: I/O error, dev mmcblk0, sector 772176
  399. [ 1206.838512] blk_update_request: I/O error, dev mmcblk0, sector 772184
  400. [ 1206.844958] blk_update_request: I/O error, dev mmcblk0, sector 772192
  401. [ 1206.851404] blk_update_request: I/O error, dev mmcblk0, sector 772200
  402. [ 1206.857858] BTRFS error (device mmcblk0p2): bdev /dev/root errs: wr 1, rd 0, flush 0, corrupt 0, gen 0
  403. [ 1206.867278] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  404. [ 1206.875122] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  405. [ 1206.882933] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  406. [ 1206.890743] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  407. [ 1206.898553] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  408. [ 1206.906373] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  409. [ 1206.962030] mmc0: tried to reset card
  410. [ 1806.987357] mmc0: Card stuck in programming state! mmcblk0 card_busy_detect
  411. [ 1806.994385] blk_update_request: 6 callbacks suppressed
  412. [ 1806.999531] blk_update_request: I/O error, dev mmcblk0, sector 772128
  413. [ 1807.005981] blk_update_request: I/O error, dev mmcblk0, sector 772136
  414. [ 1807.012427] blk_update_request: I/O error, dev mmcblk0, sector 772144
  415. [ 1807.018874] blk_update_request: I/O error, dev mmcblk0, sector 772152
  416. [ 1807.025320] blk_update_request: I/O error, dev mmcblk0, sector 772160
  417. [ 1807.031766] blk_update_request: I/O error, dev mmcblk0, sector 772168
  418. [ 1807.038212] blk_update_request: I/O error, dev mmcblk0, sector 772176
  419. [ 1807.044658] blk_update_request: I/O error, dev mmcblk0, sector 772184
  420. [ 1807.051103] blk_update_request: I/O error, dev mmcblk0, sector 772192
  421. [ 1807.057549] blk_update_request: I/O error, dev mmcblk0, sector 772200
  422. [ 1807.064003] BTRFS error (device mmcblk0p2): bdev /dev/root errs: wr 2, rd 0, flush 0, corrupt 0, gen 0
  423. [ 1807.073428] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  424. [ 1807.081270] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  425. [ 1807.089077] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  426. [ 1807.096883] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  427. [ 1807.104689] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  428. [ 1807.112495] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  429. [ 1807.168029] mmc0: tried to reset card
  430. [ 1807.174714] mount_root: mounting /dev/root
  431. [ 2407.182356] mmc0: Card stuck in programming state! mmcblk0 card_busy_detect
  432. [ 2407.189380] blk_update_request: 6 callbacks suppressed
  433. [ 2407.194526] blk_update_request: I/O error, dev mmcblk0, sector 772256
  434. [ 2407.200976] blk_update_request: I/O error, dev mmcblk0, sector 772264
  435. [ 2407.207422] blk_update_request: I/O error, dev mmcblk0, sector 772272
  436. [ 2407.213869] blk_update_request: I/O error, dev mmcblk0, sector 772280
  437. [ 2407.220315] blk_update_request: I/O error, dev mmcblk0, sector 772288
  438. [ 2407.226762] blk_update_request: I/O error, dev mmcblk0, sector 772296
  439. [ 2407.233208] blk_update_request: I/O error, dev mmcblk0, sector 772304
  440. [ 2407.239654] blk_update_request: I/O error, dev mmcblk0, sector 772312
  441. [ 2407.246100] blk_update_request: I/O error, dev mmcblk0, sector 772320
  442. [ 2407.252546] blk_update_request: I/O error, dev mmcblk0, sector 772328
  443. [ 2407.259443] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  444. [ 2407.267391] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  445. [ 2407.275329] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  446. [ 2407.283266] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  447. [ 2407.291202] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  448. [ 2407.299138] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  449. [ 2407.307191] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  450. [ 2407.315135] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  451. [ 2407.323067] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  452. [ 2407.330999] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  453. [ 2407.338930] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  454. [ 2407.346860] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  455. [ 2407.354937] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  456. [ 2407.362876] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  457. [ 2407.370809] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  458. [ 2407.378740] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  459. [ 2407.386670] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  460. [ 2407.394601] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  461. [ 2407.402380] BTRFS error (device mmcblk0p2): bdev /dev/root errs: wr 3, rd 0, flush 0, corrupt 0, gen 0
  462. [ 2407.412138] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  463. [ 2407.420087] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  464. [ 2407.428019] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  465. [ 2407.435956] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  466. [ 2407.443894] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  467. [ 2407.451826] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  468. [ 2407.459889] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  469. [ 2407.467827] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  470. [ 2407.475759] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  471. [ 2407.483689] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  472. [ 2407.491620] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  473. [ 2407.499550] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  474. [ 2407.507611] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  475. [ 2407.515553] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  476. [ 2407.523492] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  477. [ 2407.531432] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  478. [ 2407.539372] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  479. [ 2407.547304] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  480. [ 2407.555190] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  481. [ 2407.563058] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  482. [ 2407.570922] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  483. [ 2407.578791] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  484. [ 2407.586655] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  485. [ 2407.594519] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  486. [ 2407.602297] BTRFS error (device mmcblk0p2): bdev /dev/root errs: wr 4, rd 0, flush 0, corrupt 0, gen 0
  487. [ 2407.612476] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  488. [ 2407.620390] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  489. [ 2407.628274] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  490. [ 2407.636161] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  491. [ 2407.644044] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  492. [ 2407.651928] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  493. [ 2407.708031] mmc0: tried to reset card
  494. [ 3007.716368] mmc0: Card stuck in programming state! mmcblk0 card_busy_detect
  495. [ 3007.723390] blk_update_request: 118 callbacks suppressed
  496. [ 3007.728710] blk_update_request: I/O error, dev mmcblk0, sector 248192
  497. [ 3007.735159] blk_update_request: I/O error, dev mmcblk0, sector 248200
  498. [ 3007.741606] blk_update_request: I/O error, dev mmcblk0, sector 248208
  499. [ 3007.748053] blk_update_request: I/O error, dev mmcblk0, sector 248216
  500. [ 3007.754499] blk_update_request: I/O error, dev mmcblk0, sector 248224
  501. [ 3007.760945] blk_update_request: I/O error, dev mmcblk0, sector 248232
  502. [ 3007.767391] blk_update_request: I/O error, dev mmcblk0, sector 248240
  503. [ 3007.773837] blk_update_request: I/O error, dev mmcblk0, sector 248248
  504. [ 3007.780283] blk_update_request: I/O error, dev mmcblk0, sector 248256
  505. [ 3007.786729] blk_update_request: I/O error, dev mmcblk0, sector 248264
  506. [ 3007.793515] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  507. [ 3007.801423] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  508. [ 3007.809323] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  509. [ 3007.817223] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  510. [ 3007.825122] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  511. [ 3007.833022] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  512. [ 3007.840791] BTRFS error (device mmcblk0p2): bdev /dev/root errs: wr 5, rd 0, flush 0, corrupt 0, gen 0
  513. [ 3007.850478] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  514. [ 3007.858433] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  515. [ 3007.866377] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  516. [ 3007.874314] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  517. [ 3007.882252] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  518. [ 3007.890193] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  519. [ 3007.898287] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  520. [ 3007.906226] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  521. [ 3007.914159] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  522. [ 3007.922091] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  523. [ 3007.930024] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  524. [ 3007.937957] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  525. [ 3007.945735] BTRFS error (device mmcblk0p2): bdev /dev/root errs: wr 6, rd 0, flush 0, corrupt 0, gen 0
  526. [ 3007.955440] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  527. [ 3007.963401] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  528. [ 3007.971343] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  529. [ 3007.979293] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  530. [ 3007.987235] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  531. [ 3007.995176] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  532. [ 3008.003273] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  533. [ 3008.011229] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  534. [ 3008.019174] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  535. [ 3008.027115] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  536. [ 3008.035056] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  537. [ 3008.042996] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  538. [ 3008.051053] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  539. [ 3008.059010] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  540. [ 3008.066958] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  541. [ 3008.074905] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  542. [ 3008.082851] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  543. [ 3008.090796] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  544. [ 3008.098856] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  545. [ 3008.106824] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  546. [ 3008.114777] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  547. [ 3008.122730] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  548. [ 3008.130709] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  549. [ 3008.138668] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  550. [ 3008.146747] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  551. [ 3008.154704] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  552. [ 3008.162651] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  553. [ 3008.170594] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  554. [ 3008.178542] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  555. [ 3008.186490] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  556. [ 3008.194514] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  557. [ 3008.202442] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  558. [ 3008.210370] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  559. [ 3008.218284] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  560. [ 3008.226198] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  561. [ 3008.234111] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  562. [ 3008.242153] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  563. [ 3008.250079] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  564. [ 3008.257999] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  565. [ 3008.265918] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  566. [ 3008.273836] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  567. [ 3008.281753] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  568. [ 3008.289527] BTRFS error (device mmcblk0p2): bdev /dev/root errs: wr 7, rd 0, flush 0, corrupt 0, gen 0
  569. [ 3008.299289] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  570. [ 3008.307253] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  571. [ 3008.315200] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  572. [ 3008.323146] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  573. [ 3008.331091] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  574. [ 3008.339040] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  575. [ 3008.346972] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  576. [ 3008.354848] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  577. [ 3008.362724] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  578. [ 3008.370599] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  579. [ 3008.378477] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  580. [ 3008.386360] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  581. [ 3008.394368] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  582. [ 3008.402245] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  583. [ 3008.410120] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  584. [ 3008.417998] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  585. [ 3008.425874] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  586. [ 3008.433749] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  587. [ 3008.441513] BTRFS error (device mmcblk0p2): bdev /dev/root errs: wr 8, rd 0, flush 0, corrupt 0, gen 0
  588. [ 3008.451136] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  589. [ 3008.459055] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  590. [ 3008.466968] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  591. [ 3008.474880] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  592. [ 3008.482791] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  593. [ 3008.490702] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  594. [ 3008.498568] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  595. [ 3008.506416] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  596. [ 3008.514264] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  597. [ 3008.522110] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  598. [ 3008.529960] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  599. [ 3008.537806] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  600. [ 3008.545576] BTRFS error (device mmcblk0p2): bdev /dev/root errs: wr 9, rd 0, flush 0, corrupt 0, gen 0
  601. [ 3008.555171] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  602. [ 3008.563052] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  603. [ 3008.570928] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  604. [ 3008.578803] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  605. [ 3008.586678] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  606. [ 3008.594553] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  607. [ 3008.650031] mmc0: tried to reset card
  608. [ 3608.658356] mmc0: Card stuck in programming state! mmcblk0 card_busy_detect
  609. [ 3608.665381] blk_update_request: 218 callbacks suppressed
  610. [ 3608.670701] blk_update_request: I/O error, dev mmcblk0, sector 251360
  611. [ 3608.677161] blk_update_request: I/O error, dev mmcblk0, sector 251368
  612. [ 3608.683610] blk_update_request: I/O error, dev mmcblk0, sector 251376
  613. [ 3608.690056] blk_update_request: I/O error, dev mmcblk0, sector 251384
  614. [ 3608.696503] blk_update_request: I/O error, dev mmcblk0, sector 251392
  615. [ 3608.702949] blk_update_request: I/O error, dev mmcblk0, sector 251400
  616. [ 3608.709396] blk_update_request: I/O error, dev mmcblk0, sector 251408
  617. [ 3608.715842] blk_update_request: I/O error, dev mmcblk0, sector 251416
  618. [ 3608.722288] blk_update_request: I/O error, dev mmcblk0, sector 251424
  619. [ 3608.728734] blk_update_request: I/O error, dev mmcblk0, sector 251432
  620. [ 3608.735538] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  621. [ 3608.743461] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  622. [ 3608.751380] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  623. [ 3608.759291] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  624. [ 3608.767203] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  625. [ 3608.775114] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  626. [ 3608.783151] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  627. [ 3608.791078] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  628. [ 3608.798990] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  629. [ 3608.806903] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  630. [ 3608.814815] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  631. [ 3608.822729] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  632. [ 3608.830502] BTRFS error (device mmcblk0p2): bdev /dev/root errs: wr 10, rd 0, flush 0, corrupt 0, gen 0
  633. [ 3608.840284] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  634. [ 3608.848225] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  635. [ 3608.856156] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  636. [ 3608.864085] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  637. [ 3608.872015] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  638. [ 3608.879946] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  639. [ 3608.887999] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  640. [ 3608.895936] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  641. [ 3608.903896] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  642. [ 3608.911830] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  643. [ 3608.919765] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  644. [ 3608.927697] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  645. [ 3608.935683] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  646. [ 3608.943580] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  647. [ 3608.951481] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  648. [ 3608.959381] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  649. [ 3608.967275] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  650. [ 3608.975168] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  651. [ 3608.983200] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  652. [ 3608.991100] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  653. [ 3608.998996] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  654. [ 3609.006891] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  655. [ 3609.014785] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  656. [ 3609.022679] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  657. [ 3609.030446] BTRFS error (device mmcblk0p2): bdev /dev/root errs: wr 11, rd 0, flush 0, corrupt 0, gen 0
  658. [ 3609.040238] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  659. [ 3609.048206] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  660. [ 3609.056157] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  661. [ 3609.064103] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  662. [ 3609.072052] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  663. [ 3609.080001] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  664. [ 3609.087938] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  665. [ 3609.095820] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  666. [ 3609.103700] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  667. [ 3609.111578] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  668. [ 3609.119461] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  669. [ 3609.127339] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  670. [ 3609.135386] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  671. [ 3609.143265] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  672. [ 3609.151143] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  673. [ 3609.159020] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  674. [ 3609.166901] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  675. [ 3609.174778] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  676. [ 3609.182545] BTRFS error (device mmcblk0p2): bdev /dev/root errs: wr 12, rd 0, flush 0, corrupt 0, gen 0
  677. [ 3609.192314] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  678. [ 3609.200262] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  679. [ 3609.208198] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  680. [ 3609.216133] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  681. [ 3609.224068] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  682. [ 3609.232002] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  683. [ 3609.239779] BTRFS error (device mmcblk0p2): bdev /dev/root errs: wr 13, rd 0, flush 0, corrupt 0, gen 0
  684. [ 3609.249489] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  685. [ 3609.257423] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  686. [ 3609.265343] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  687. [ 3609.273262] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  688. [ 3609.281180] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  689. [ 3609.289098] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  690. [ 3609.296965] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  691. [ 3609.304815] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  692. [ 3609.312666] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  693. [ 3609.320513] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  694. [ 3609.328361] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  695. [ 3609.336206] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  696. [ 3609.343976] BTRFS error (device mmcblk0p2): bdev /dev/root errs: wr 14, rd 0, flush 0, corrupt 0, gen 0
  697. [ 3609.353465] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  698. [ 3609.361275] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  699. [ 3609.369083] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  700. [ 3609.376891] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  701. [ 3609.384700] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  702. [ 3609.392508] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  703. [ 3609.448032] mmc0: tried to reset card
  704. [ 4209.473362] mmc0: Card stuck in programming state! mmcblk0 card_busy_detect
  705. [ 4209.480387] blk_update_request: 170 callbacks suppressed
  706. [ 4209.485708] blk_update_request: I/O error, dev mmcblk0, sector 772128
  707. [ 4209.492157] blk_update_request: I/O error, dev mmcblk0, sector 772136
  708. [ 4209.498604] blk_update_request: I/O error, dev mmcblk0, sector 772144
  709. [ 4209.505050] blk_update_request: I/O error, dev mmcblk0, sector 772152
  710. [ 4209.511496] blk_update_request: I/O error, dev mmcblk0, sector 772160
  711. [ 4209.517942] blk_update_request: I/O error, dev mmcblk0, sector 772168
  712. [ 4209.524388] blk_update_request: I/O error, dev mmcblk0, sector 772176
  713. [ 4209.530834] blk_update_request: I/O error, dev mmcblk0, sector 772184
  714. [ 4209.537280] blk_update_request: I/O error, dev mmcblk0, sector 772192
  715. [ 4209.543726] blk_update_request: I/O error, dev mmcblk0, sector 772200
  716. [ 4209.550180] BTRFS error (device mmcblk0p2): bdev /dev/root errs: wr 15, rd 0, flush 0, corrupt 0, gen 0
  717. [ 4209.560065] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  718. [ 4209.568151] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  719. [ 4209.576098] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  720. [ 4209.584035] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  721. [ 4209.591975] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  722. [ 4209.599908] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  723. [ 4209.607985] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  724. [ 4209.615934] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  725. [ 4209.623870] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  726. [ 4209.631806] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  727. [ 4209.639741] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  728. [ 4209.647677] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  729. [ 4209.655776] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  730. [ 4209.663735] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  731. [ 4209.671687] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  732. [ 4209.679638] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  733. [ 4209.687588] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  734. [ 4209.695542] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  735. [ 4209.703625] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  736. [ 4209.711570] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  737. [ 4209.719514] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  738. [ 4209.727458] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  739. [ 4209.735400] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  740. [ 4209.743335] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  741. [ 4209.751118] BTRFS error (device mmcblk0p2): bdev /dev/root errs: wr 16, rd 0, flush 0, corrupt 0, gen 0
  742. [ 4209.760912] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  743. [ 4209.768858] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  744. [ 4209.776792] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  745. [ 4209.784724] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  746. [ 4209.792655] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  747. [ 4209.800586] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  748. [ 4209.808646] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  749. [ 4209.816597] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  750. [ 4209.824552] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  751. [ 4209.832508] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  752. [ 4209.840459] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  753. [ 4209.848412] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  754. [ 4209.856501] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  755. [ 4209.864447] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  756. [ 4209.872388] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  757. [ 4209.880325] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  758. [ 4209.888260] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  759. [ 4209.896195] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  760. [ 4209.904262] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  761. [ 4209.912203] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  762. [ 4209.920136] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  763. [ 4209.928068] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  764. [ 4209.936002] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  765. [ 4209.943935] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  766. [ 4209.951715] BTRFS error (device mmcblk0p2): bdev /dev/root errs: wr 17, rd 0, flush 0, corrupt 0, gen 0
  767. [ 4209.961332] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  768. [ 4209.969198] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  769. [ 4209.977061] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  770. [ 4209.984924] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  771. [ 4209.992788] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  772. [ 4210.000650] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  773. [ 4210.008429] BTRFS error (device mmcblk0p2): bdev /dev/root errs: wr 18, rd 0, flush 0, corrupt 0, gen 0
  774. [ 4210.019477] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  775. [ 4210.027369] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  776. [ 4210.035248] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  777. [ 4210.043125] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  778. [ 4210.050998] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  779. [ 4210.058866] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  780. [ 4210.066649] BTRFS error (device mmcblk0p2): bdev /dev/root errs: wr 19, rd 0, flush 0, corrupt 0, gen 0
  781. [ 4210.078572] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  782. [ 4210.086487] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  783. [ 4210.094374] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  784. [ 4210.102252] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  785. [ 4210.110129] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  786. [ 4210.118006] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  787. [ 4210.125772] BTRFS error (device mmcblk0p2): bdev /dev/root errs: wr 20, rd 0, flush 0, corrupt 0, gen 0
  788. [ 4210.135488] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  789. [ 4210.143461] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  790. [ 4210.151418] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  791. [ 4210.159377] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  792. [ 4210.167326] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  793. [ 4210.175279] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  794. [ 4210.183272] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  795. [ 4210.191186] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  796. [ 4210.199097] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  797. [ 4210.207008] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  798. [ 4210.214918] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  799. [ 4210.222827] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  800. [ 4210.230832] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  801. [ 4210.238746] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  802. [ 4210.246657] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  803. [ 4210.254568] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  804. [ 4210.262485] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  805. [ 4210.270407] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  806. [ 4210.278179] BTRFS error (device mmcblk0p2): bdev /dev/root errs: wr 21, rd 0, flush 0, corrupt 0, gen 0
  807. [ 4210.287771] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  808. [ 4210.295636] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  809. [ 4210.303502] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  810. [ 4210.311373] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  811. [ 4210.319235] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  812. [ 4210.327097] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  813. [ 4210.334873] BTRFS error (device mmcblk0p2): bdev /dev/root errs: wr 22, rd 0, flush 0, corrupt 0, gen 0
  814. [ 4210.344312] BTRFS: error (device mmcblk0p2) in btrfs_commit_transaction:2218: errno=-5 IO failure (Error while writing out transaction)
  815. [ 4210.356508] BTRFS info (device mmcblk0p2): forced readonly
  816. [ 4210.362003] BTRFS warning (device mmcblk0p2): Skipping commit of aborted transaction.
  817. [ 4210.369904] ------------[ cut here ]------------
  818. [ 4210.374518] WARNING: at fs/btrfs/transaction.c:1840
  819. [ 4210.379391] Modules linked in: usb_storage leds_gpio xhci_plat_hcd xhci_pci xhci_hcd uhci_hcd ahci libahci libata ehci_fsl ehci_platform el
  820. [ 4210.405747] CPU: 0 PID: 1005 Comm: btrfs-transacti Not tainted 4.4.119-df8c454b3cdf471ca0ef3e4df07c2cb7-0 #1
  821. [ 4210.415578] task: da85f080 ti: daade000 task.ti: daade000
  822. [ 4210.420974] NIP: c01e8a84 LR: c01e8a84 CTR: 00000000
  823. [ 4210.425937] REGS: daadfdb0 TRAP: 0700 Not tainted (4.4.119-df8c454b3cdf471ca0ef3e4df07c2cb7-0)
  824. [ 4210.434809] MSR: 00029000 <CE,EE,ME> CR: 28000042 XER: 00000000
  825. [ 4210.440916]
  826. GPR00: c01e8a84 daadfe60 da85f080 00000025 00029000 00000000 00000035 c064e1bc
  827. GPR08: 00000001 c0626794 c0626794 0000030a 44000044 00000000 c0045464 de8d80a0
  828. GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  829. GPR24: 000ee50c da43b00c da456148 00000000 fffffffb da43b000 da41d068 dabc7000
  830. [ 4210.470654] NIP [c01e8a84] btrfs_commit_transaction+0xc38/0xde8
  831. [ 4210.476573] LR [c01e8a84] btrfs_commit_transaction+0xc38/0xde8
  832. [ 4210.482404] Call Trace:
  833. [ 4210.484846] [daadfe60] [c01e8a84] btrfs_commit_transaction+0xc38/0xde8 (unreliable)
  834. [ 4210.492509] [daadfec0] [c01e267c] transaction_kthread+0xfc/0x1c8
  835. [ 4210.498520] [daadfef0] [c0045544] kthread+0xe0/0xe4
  836. [ 4210.503401] [daadff40] [c000daf0] ret_from_kernel_thread+0x5c/0x64
  837. [ 4210.509579] Instruction dump:
  838. [ 4210.512543] 7d005028 7d074b78 7ce0512d 40a2fff4 7c0004ac 71090004 40a2001c 3c60c059
  839. [ 4210.520303] 7f84e378 38631f6c 4cc63182 482ee1c9 <0fe00000> 3ca0c04f 7fc3f378 38a54d6c
  840. [ 4210.528238] ---[ end trace 05dcaa073f293b65 ]---
  841. [ 4210.532875] BTRFS: error (device mmcblk0p2) in cleanup_transaction:1840: errno=-5 IO failure
  842. [ 4210.541325] BTRFS info (device mmcblk0p2): delayed_refs has NO entry
  843. [ 4210.547831] BTRFS info (device mmcblk0p2): disk space caching is enabled
  844. [ 4210.554545] BTRFS error (device mmcblk0p2): Remounting read-write after error is not allowed
  845. [ 4210.563167] mount_root: loading kmods from internal overlay
  846. [ 4210.598578] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  847. [ 4210.606434] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  848. [ 4210.614258] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  849. [ 4210.622204] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  850. [ 4210.630015] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  851. [ 4210.637825] mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400f00
  852. [ 4210.694030] mmc0: tried to reset card
  853. [ 4211.082034] block: attempting to load /etc/config/fstab
  854. [ 4211.090342] block: extroot: not configured
  855. ifconfig: SIOCSIFFLAGS: Cannot assign [ 4211.101995] procd: - early -
  856. re[ 4211.105020] procd: - watchdog -
  857. quested address
  858. Failed to connect to ubus
  859. Failed to connect to ubus
  860. [ 4211.774705] procd: - ubus -
  861. [ 4212.777759] procd: - init -
  862. Please press Enter to activate this console.
  863. [ 4212.913703] NET: Registered protocol family 38
  864. [ 4212.929806] Netfilter messages via NETLINK v0.30.
  865. [ 4212.943177] md: linear personality registered for level -1
  866. [ 4212.949393] md: raid0 personality registered for level 0
  867. [ 4212.955821] md: raid1 personality registered for level 1
  868. [ 4212.962467] md: raid10 personality registered for level 10
  869. [ 4212.972852] md: raid6 personality registered for level 6
  870. [ 4212.978228] md: raid5 personality registered for level 5
  871. [ 4212.983561] md: raid4 personality registered for level 4
  872. [ 4212.992781] FS-Cache: Loaded
  873. [ 4212.996484] md: multipath personality registered for level -4
  874. [ 4213.004452] NET: Registered protocol family 8
  875. [ 4213.008824] NET: Registered protocol family 20
  876. [ 4213.018903] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
  877. [ 4213.031505] Key type dns_resolver registered
  878. [ 4213.040149] NET: Registered protocol family 33
  879. [ 4213.044621] Key type rxrpc registered
  880. [ 4213.048286] Key type rxrpc_s registered
  881. [ 4213.056405] kAFS: Red Hat AFS client v0.1 registering.
  882. [ 4213.061612] FS-Cache: Netfs 'afs' registered for caching
  883. [ 4213.100802] RPC: Registered named UNIX socket transport module.
  884. [ 4213.106763] RPC: Registered udp transport module.
  885. [ 4213.111476] RPC: Registered tcp transport module.
  886. [ 4213.116183] RPC: Registered tcp NFSv4.1 backchannel transport module.
  887. [ 4213.146037] NFS: Registering the id_resolver key type
  888. [ 4213.151131] Key type id_resolver registered
  889. [ 4213.155321] Key type id_legacy registered
  890. [ 4213.160215] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  891. [ 4213.170651] ntfs: driver 2.1.32 [Flags: R/O MODULE].
  892. [ 4213.180453] RxRPC: Registered security type 2 'rxkad'
  893. [ 4213.204283] tun: Universal TUN/TAP device driver, 1.6
  894. [ 4213.209371] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  895. [ 4213.221284] sit: IPv6 over IPv4 tunneling driver
  896. [ 4213.228828] gre: GRE over IPv4 demultiplexor driver
  897. [ 4213.234563] ip_gre: GRE over IPv4 tunneling driver
  898. [ 4213.251266] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  899. [ 4213.260519] PPP generic driver version 2.4.2
  900. [ 4213.267241] ip6_tables: (C) 2000-2006 Netfilter Core Team
  901. [ 4213.283375] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  902. [ 4213.422808] ip_set: protocol 6
  903. [ 4214.011653] cryptodev: driver 1.8 loaded.
  904. [ 4214.056641] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
  905. [ 4214.064684] Backport generated by backports.git backports-20160324-13-g24da7d3c
  906. [ 4214.252070] Linux video capture interface: v2.00
  907. [ 4214.625012] u32 classifier
  908. [ 4214.627759] input device check on
  909. [ 4214.631438] Actions configured
  910. [ 4214.699974] Mirror/redirect action on
  911. [ 4214.832888] GACT probability on
  912. [ 4215.387967] netem: version 1.3
  913. [ 4215.618733] fuse init (API version 7.23)
  914. [ 4215.674963] usbcore: registered new interface driver cdc_wdm
  915. [ 4215.687140] Ebtables v2.0 registered
  916. [ 4215.695614] ip_tables: (C) 2000-2006 Netfilter Core Team
  917. [ 4215.719041] ctnetlink v0.93: registering with nfnetlink.
  918. [ 4215.770899] nfnl_acct: registering with nfnetlink.
  919. [ 4215.778230] PPP MPPE Compression module registered
  920. [ 4215.784035] NET: Registered protocol family 24
  921. [ 4215.792020] usbcore: registered new interface driver ums-alauda
  922. [ 4215.799904] usbcore: registered new interface driver ums-cypress
  923. [ 4215.807952] usbcore: registered new interface driver ums-datafab
  924. [ 4215.816086] usbcore: registered new interface driver ums-freecom
  925. [ 4215.824074] usbcore: registered new interface driver ums-isd200
  926. [ 4215.832111] usbcore: registered new interface driver ums-jumpshot
  927. [ 4215.840345] usbcore: registered new interface driver ums-karma
  928. [ 4215.848798] usbcore: registered new interface driver ums-sddr09
  929. [ 4215.856718] usbcore: registered new interface driver ums-sddr55
  930. [ 4215.865188] usbcore: registered new interface driver ums-usbat
  931. [ 4215.873397] usbcore: registered new interface driver usblp
  932. [ 4215.891725] usbcore: registered new interface driver usbserial
  933. [ 4215.897678] usbcore: registered new interface driver usbserial_generic
  934. [ 4215.904293] usbserial: USB Serial support registered for generic
  935. [ 4215.935665] xt_time: kernel timezone is -0000
  936. [ 4215.951789] usbcore: registered new interface driver ath9k_htc
  937. [ 4215.959591] usbcore: registered new interface driver cdc_ether
  938. [ 4215.968348] usbcore: registered new interface driver ftdi_sio
  939. [ 4215.974244] usbserial: USB Serial support registered for FTDI USB Serial Device
  940. [ 4215.997891] usbcore: registered new interface driver qmi_wwan
  941. [ 4216.005936] usbcore: registered new interface driver rndis_host
  942. [ 4216.023300] usbcore: registered new interface driver uvcvideo
  943. [ 4216.029080] USB Video Class driver (1.1.1)
  944. [ 4216.169503] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xe4400000, irq=27
  945. [ 4216.178960] usbcore: registered new interface driver option
  946. [ 4216.184655] usbserial: USB Serial support registered for GSM modem (1-port)
  947. May 15 20:09:49 lcollect[5873]: Initializing emergency signal handlers
  948.  
  949. May 15 20:09:49 lcollect[5873]: Creating a main loop
  950.  
  951. May 15 20:09:49 lcollect[5873]: Initializing PCAP (in) on br-lan
  952.  
  953. May 15 20:09:49 lcollect[5873]: PCAP on (in) br-lan: SIOCGIFHWADDR: No such device, closing
  954.  
  955. May 15 20:09:49 lcollect[5873]: No configuration available
  956.  
  957. May 15 20:09:49 ucollect[6141]: Initializing emergency signal handlers
  958.  
  959. May 15 20:09:49 ucollect[6141]: Creating a main loop
  960.  
  961. May 15 20:09:49 ucollect[6141]: Creating uplink
  962.  
  963. May 15 20:09:49 ucollect[6141]: Initializing PCAP (in) on br-wan
  964.  
  965. May 15 20:09:49 ucollect[6141]: Initializing PCAP (out) on br-wan
  966.  
  967. May 15 20:09:49 ucollect[6141]: Initializing PCAP (in) on lo
  968.  
  969. May 15 20:09:49 ucollect[6141]: Initializing PCAP (out) on lo
  970.  
  971. May 15 20:09:49 ucollect[6141]: Loading plugin library libplugin_ucollect_badconf_25.so
  972.  
  973. May 15 20:09:49 ucollect[6141]: Installing plugin Badconf with api version 0
  974.  
  975. May 15 20:09:49 ucollect[6141]: Loading plugin library libplugin_ucollect_bandwidth_22.so
  976.  
  977. May 15 20:09:49 ucollect[6141]: Installing plugin Bandwidth with api version 0
  978.  
  979. May 15 20:09:49 ucollect[6141]: Loading plugin library libplugin_ucollect_count_28.so
  980.  
  981. May 15 20:09:49 ucollect[6141]: Installing plugin Count with api version 0
  982.  
  983. May 15 20:09:49 ucollect[6141]: Loading plugin library libplugin_ucollect_fake_23.so
  984.  
  985. May 15 20:09:50 ucollect[6141]: Installing plugin Fake with api version 0
  986.  
  987. May 15 20:09:50 ucollect[6141]: Loading plugin library libplugin_ucollect_flow_33.so
  988.  
  989. May 15 20:09:50 ucollect[6141]: Installing plugin Flow with api version 2
  990.  
  991. May 15 20:09:50 ucollect[6141]: Loading plugin library libpluglib_ucollect_diffstore_1.2.so
  992.  
  993. May 15 20:09:50 ucollect[6141]: Loading plugin library libplugin_ucollect_fwup_12.so
  994.  
  995. May 15 20:09:50 ucollect[6141]: Installing plugin Fwup with api version 2
  996.  
  997. May 15 20:09:50 ucollect[6141]: Loading plugin library libpluglib_ucollect_diffstore_1.2.so
  998.  
  999. May 15 20:09:50 ucollect[6141]: Loading plugin library libplugin_ucollect_refused_13.so
  1000.  
  1001. May 15 20:09:50 ucollect[6141]: Installing plugin Refused with api version 0
  1002.  
  1003. May 15 20:09:50 ucollect[6141]: Loading plugin library libplugin_ucollect_sniff_19.so
  1004.  
  1005. May 15 20:09:50 ucollect[6141]: Installing plugin Sniff with api version 0
  1006.  
  1007. May 15 20:09:50 ucollect[6141]: Loading plugin library libplugin_ucollect_spoof_8.so
  1008.  
  1009. May 15 20:09:50 ucollect[6141]: Installing plugin Spoof with api version 0
  1010.  
  1011. May 15 20:09:50 ucollect[6141]: Changing remote uplink address to api.turris.cz:5679
  1012.  
  1013. Router Turris successfully started.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!