API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jan 15th, 2020
487
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 27.30 KB | None | 0 0
raw download clone embed print report
  1. SM1 boot MM2
  2.  
  3. SM1:BL:511f6b:81ca2f;FEAT:A0F83180:20282000;POC:F;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
  4. bl2_stage_init 0x01
  5. bl2_stage_init 0x81
  6. hw id: 0x0001 - pwm id 0x00
  7. bl2_stage_init 0xc0
  8. bl2_stage_init 0x02
  9.  
  10. L0:00000000
  11. L1:00000703
  12. L2:00008067
  13. L3:15000020
  14. S1:00000000
  15. B2:20282000
  16. B1:a0f83180
  17.  
  18. TE: 81006
  19.  
  20. BL2 Built : 20:29:41, Jun 18 2019. g12a ga659aac - luan.yuan@droid15-sz
  21.  
  22. Board ID = 1
  23. Set cpu clk to 24M
  24. Set clk81 to 24M
  25. Use GP1_pll as DSU clk.
  26. DSU clk: 1200 Mhz
  27. CPU clk: 1200 MHz
  28. Set clk81 to 166.6M
  29. eMMC boot @ 0
  30. sw8 s
  31. DDR driver_vesion: LPDDR4_PHY_V_0_1_15 build time: Jun 18 2019 20:29:37
  32. board id: 1
  33. Load FIP HDR from eMMC, src: 0x00010200, des: 0xfffd0000, size: 0x00004000, part: 0
  34. fw parse done
  35. Load ddrfw from eMMC, src: 0x00060200, des: 0xfffd0000, size: 0x0000c000, part: 0
  36. Load ddrfw from eMMC, src: 0x00038200, des: 0xfffd0000, size: 0x00004000, part: 0
  37. PIEI prepare done
  38. fastboot data load
  39. 00000000
  40. emmc switch 1 ok
  41. ddr saved addr:00016000
  42. Load ddr parameter from eMMC, src: 0x02c00000, des: 0xfffd0000, size: 0x00001000, part: 0
  43. 00000000
  44. emmc switch 0 ok
  45. fastboot data verify
  46. verify result: 0
  47. enable_fast_boot
  48. dmc_margin_rx==12 dmc_margin_tx==12 steps
  49. DDR3 probe
  50. ddr clk to 792MHz
  51. Load ddrfw from eMMC, src: 0x0002c200, des: 0xfffd0000, size: 0x0000c000, part: 0
  52.  
  53. dmc_version 0001
  54. Check phy result
  55. INFO : End of initialization
  56. INFO : Training has run successfully!
  57. aml_ddr_fw_vesion: LPDDR4_PHY_V_0_1_15 build time: Jun 18 2019 20:29:43
  58. DDR cs0 size: 2048MB
  59. DDR cs1 size: 0MB
  60. DMC_DDR_CTRL: 0000002cDDR size: 2048MB
  61. cs0 DataBus test pass
  62. cs0 AddrBus test pass
  63.  
  64. non-sec scramble use zero key
  65. ddr scramble enabled
  66.  
  67. 100bdlr_step_size ps== 429
  68. result report
  69. boot times 0Enable ddr reg access
  70. 00000000
  71. emmc switch 3 ok
  72. BL2: rpmb counter: 0x00000002
  73. 00000000
  74. emmc switch 0 ok
  75. Load FIP HDR from eMMC, src: 0x00010200, des: 0x01700000, size: 0x00004000, part: 0
  76. Load BL3X from eMMC, src: 0x00078200, des: 0x01768000, size: 0x000d0000, part: 0
  77. bl2z: ptr: 05129330, size: 00001e40
  78. 0.0;M3 CHK:0;cm4_sp_mode 0
  79. MVN_1=0x00000000
  80. MVN_2=0x00000000
  81. [Image: g12a_v1.1.3389-92241b5 2019-07-02 17:22:49 luan.yuan@droid15-sz]
  82. OPS=0x10
  83. ring efuse init
  84. 2b 0c 10 00 01 17 1c 00 00 01 33 39 32 47 38 50
  85. [0.017354 Inits done]
  86. secure task start!
  87. high task start!
  88. low task start!
  89. run into bl31
  90. NOTICE: BL31: v1.3(release):4fc40b1
  91. NOTICE: BL31: Built : 15:57:33, May 22 2019
  92. NOTICE: BL31: G12A normal boot!
  93. NOTICE: BL31: BL33 decompress pass
  94. ERROR: Error initializing runtime service opteed_fast
  95.  
  96.  
  97. U-Boot 2015.01 (Sep 17 2019 - 20:01:58)
  98.  
  99. DRAM: 2 GiB
  100. Relocation Offset is: 76e51000
  101. spi_post_bind(spifc): req_seq = 0
  102. register usb cfg[0][1] = 0000000077f3efa0
  103. NAND: get_sys_clk_rate_mtd() 290, clock setting 200!
  104. NAND device id: 0 ff ff ff ff ff
  105. No NAND device found!!!
  106. nand init failed: -6
  107. get_sys_clk_rate_mtd() 290, clock setting 200!
  108. NAND device id: 0 ff ff ff ff ff
  109. No NAND device found!!!
  110. nand init failed: -6
  111. MMC: aml_priv->desc_buf = 0x0000000073e41a70
  112. aml_priv->desc_buf = 0x0000000073e43db0
  113. SDIO Port B: 0, SDIO Port C: 1
  114. co-phase 0x2, tx-dly 0, clock 400000
  115. co-phase 0x2, tx-dly 0, clock 400000
  116. co-phase 0x2, tx-dly 0, clock 400000
  117. emmc/sd response timeout, cmd8, status=0x1ff2800
  118. emmc/sd response timeout, cmd55, status=0x1ff2800
  119. co-phase 0x2, tx-dly 0, clock 400000
  120. co-phase 0x2, tx-dly 0, clock 40000000
  121. aml_sd_retry_refix[983]:delay = 0x0,gadjust =0x142000
  122. [mmc_startup] mmc refix success
  123. init_part() 297: PART_TYPE_AML
  124. [mmc_init] mmc init success
  125. Amlogic multi-dtb tool
  126. GZIP format, decompress...
  127. Multi dtb detected
  128. Multi dtb tool version: v2 .
  129. Support 6 dtbs.
  130. aml_dt soc: sm1 platform: ac213 variant: 2g
  131. dtb 0 soc: g12a plat: u212 vari: 1g
  132. dtb 1 soc: g12a plat: u212 vari: 2g
  133. dtb 2 soc: g12a plat: u212 vari: 4g
  134. dtb 3 soc: sm1 plat: ac213 vari: 1g
  135. dtb 4 soc: sm1 plat: ac213 vari: 2g
  136. dtb 5 soc: sm1 plat: ac213 vari: 4g
  137. Find match dtb: 4
  138. start dts,buffer=0000000073e46620,dt_addr=0000000073e46620
  139. get_partition_from_dts() 91: ret 0
  140. Amlogic multi-dtb tool
  141. Single dtb detected
  142. parts: 17
  143. 00: logo 0000000000800000 1
  144. 01: recovery 0000000001800000 1
  145. 02: misc 0000000000800000 1
  146. 03: dtbo 0000000000800000 1
  147. 04: cri_data 0000000000800000 2
  148. 05: param 0000000001000000 2
  149. 06: boot 0000000001000000 1
  150. set has_boot_slot = 0
  151. 07: rsv 0000000001000000 1
  152. 08: metadata 0000000001000000 1
  153. 09: vbmeta 0000000000200000 1
  154. 10: tee 0000000002000000 1
  155. 11: vendor 0000000046000000 1
  156. 12: odm 0000000008000000 1
  157. 13: system 0000000050000000 1
  158. 14: product 0000000008000000 1
  159. 15: cache 0000000046000000 2
  160. 16: data ffffffffffffffff 4
  161. init_part() 297: PART_TYPE_AML
  162. eMMC/TSD partition table have been checked OK!
  163. crc32_s:0x1577dad == storage crc_pattern:0x1577dad!!!
  164. crc32_s:0xee152b83 == storage crc_pattern:0xee152b83!!!
  165. crc32_s:0x79f50f07 == storage crc_pattern:0x79f50f07!!!
  166. mmc env offset: 0x4d400000
  167. In: serial
  168. Out: serial
  169. Err: serial
  170. reboot_mode=cold_boot
  171. [store]To run cmd[emmc dtb_read 0x1000000 0x40000]
  172. _verify_dtb_checksum()-3406: calc 3d4bef1f, store 3d4bef1f
  173. _verify_dtb_checksum()-3406: calc 3d4bef1f, store 3d4bef1f
  174. dtb_read()-3623: total valid 2
  175. update_old_dtb()-3604: do nothing
  176. Amlogic multi-dtb tool
  177. GZIP format, decompress...
  178. Multi dtb detected
  179. Multi dtb tool version: v2 .
  180. Support 6 dtbs.
  181. aml_dt soc: sm1 platform: ac213 variant: 2g
  182. dtb 0 soc: g12a plat: u212 vari: 1g
  183. dtb 1 soc: g12a plat: u212 vari: 2g
  184. dtb 2 soc: g12a plat: u212 vari: 4g
  185. dtb 3 soc: sm1 plat: ac213 vari: 1g
  186. dtb 4 soc: sm1 plat: ac213 vari: 2g
  187. dtb 5 soc: sm1 plat: ac213 vari: 4g
  188. Find match dtb: 4
  189. amlkey_init() enter!
  190. [EFUSE_MSG]keynum is 4
  191. vpu: clk_level in dts: 7
  192. vpu: vpu_power_on
  193. vpu: set clk: 666667000Hz, readback: 666666667Hz(0x100)
  194. vpu: vpu_module_init_config
  195. vpp: vpp_init
  196. vpp: vpp osd2 matrix rgb2yuv..............
  197. cvbs: cpuid:0x2b
  198. Net: dwmac.ff3f0000amlkey_init() enter!
  199. amlkey_init() 71: already init!
  200. [EFUSE_MSG]keynum is 4
  201.  
  202. CONFIG_AVB2: null
  203. Start read misc partition datas!
  204. info->magic =
  205. info->version_major = 1
  206. info->version_minor = 0
  207. info->slots[0].priority = 15
  208. info->slots[0].tries_remaining = 7
  209. info->slots[0].successful_boot = 0
  210. info->slots[1].priority = 14
  211. info->slots[1].tries_remaining = 7
  212. info->slots[1].successful_boot = 0
  213. info->crc32 = -1075449479
  214. active slot = 0
  215. wipe_data=successful
  216. wipe_cache=successful
  217. upgrade_step=2
  218. reboot_mode:::: cold_boot
  219. amlkey_init() enter!
  220. amlkey_init() 71: already init!
  221. [EFUSE_MSG]keynum is 4
  222. [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet
  223. [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet
  224. hpd_state=1
  225. hdmitx: edid: change preferred_mode from 16 to 5
  226. edid preferred_mode is 1080i60hz[5]
  227. hdr mode is 0
  228. dv mode is ver:0 len: 0
  229. hdr10+ mode is 0
  230. [OSD]load fb addr from dts:/meson-fb
  231. [OSD]load fb addr from dts:/fb
  232. [OSD]set initrd_high: 0x7f800000
  233. [OSD]fb_addr for logo: 0x7f800000
  234. [OSD]load fb addr from dts:/meson-fb
  235. [OSD]load fb addr from dts:/fb
  236. [OSD]fb_addr for logo: 0x7f800000
  237. [OSD]VPP_OFIFO_SIZE:0xfff01fff
  238. [CANVAS]canvas init
  239. [CANVAS]addr=0x7f800000 width=3840, height=2160
  240. [OSD]osd_hw.free_dst_data: 0,1919,0,1079
  241. [OSD]osd1_update_disp_freescale_enable
  242. cvbs: outputmode[1080p60hz] is invalid
  243. vpp: vpp_matrix_update: 2
  244. set hdmitx VIC = 16
  245. config HPLL = 5940000 frac_rate = 1
  246. HPLL: 0x3b3a04f7
  247. HPLL: 0x1b3a04f7
  248. HPLLv1: 0xdb3a04f7
  249. config HPLL done
  250. j = 6 vid_clk_div = 1
  251. hdmitx: set enc for VIC: 16
  252. hdmitx phy setting done
  253. enc_vpu_bridge_reset[1249]
  254. rx version is 1.4 or below div=10
  255. vpp: sdr_mode = 2
  256. vpp: Rx hdr_info.hdr_sup_eotf_smpte_st_2084 = 0
  257. amlkey_init() enter!
  258. amlkey_init() 71: already init!
  259. [EFUSE_MSG]keynum is 4
  260. [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet
  261. [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet
  262. gpio: pin GPIOAO_3 (gpio 3) value is 1
  263. saradc - saradc sub-system
  264.  
  265. Usage:
  266. saradc saradc open <channel> - open a SARADC channel
  267. saradc close - close the SARADC
  268. saradc getval - get the value in current channel
  269. saradc test - test the SARADC by channel-7
  270. saradc get_in_range <min> <max> - return 0 if current value in the range of current channel
  271.  
  272. Command: bcb uboot-command
  273. Start read misc partition datas!
  274. BCB hasn't any datas,exit!
  275. InUsbBurn
  276. noSof
  277. sof timeout, reset usb phy tuning
  278. Hit Enter or space or Ctrl+C key to stop autoboot -- : 0
  279. card in
  280. co-phase 0x2, tx-dly 0, clock 400000
  281. co-phase 0x2, tx-dly 0, clock 400000
  282. co-phase 0x2, tx-dly 0, clock 400000
  283. co-phase 0x2, tx-dly 0, clock 400000
  284. co-phase 0x2, tx-dly 0, clock 40000000
  285. aml_sd_retry_refix[983]:delay = 0x0,gadjust =0x162000
  286. [mmc_startup] mmc refix success
  287. init_part() 282: PART_TYPE_DOS
  288. [mmc_init] mmc init success
  289. Device: SDIO Port B
  290. Manufacturer ID: 27
  291. OEM: 5048
  292. Name: SD64G
  293. Tran Speed: 50000000
  294. Rd Block Len: 512
  295. SD version 3.0
  296. High Capacity: Yes
  297. Capacity: 59.7 GiB
  298. mmc clock: 40000000
  299. Bus Width: 4-bit
  300. reading s905_autoscript
  301. 668 bytes read in 3 ms (216.8 KiB/s)
  302. ## Executing script at 01020000
  303. reading zImage
  304. 22624768 bytes read in 1243 ms (17.4 MiB/s)
  305. reading uEnv.ini
  306. 323 bytes read in 2 ms (157.2 KiB/s)
  307. mac=90:0e:b3:10:cd:a8
  308. reading /sm1_dtb
  309. 46779 bytes read in 6 ms (7.4 MiB/s)
  310. [rsvmem] get fdtaddr NULL!
  311. rsvmem - reserve memory
  312.  
  313. Usage:
  314. rsvmem check - check reserved memory
  315. rsvmem dump - dump reserved memory
  316.  
  317. rsvmem check failed
  318. Start read misc partition datas!
  319. info->magic =
  320. info->version_major = 1
  321. info->version_minor = 0
  322. info->slots[0].priority = 15
  323. info->slots[0].tries_remaining = 7
  324. info->slots[0].successful_boot = 0
  325. info->slots[1].priority = 14
  326. info->slots[1].tries_remaining = 7
  327. info->slots[1].successful_boot = 0
  328. info->crc32 = -1075449479
  329. active slot = 0
  330. active_slot is normal
  331. load dtb from 0x1000000 ......
  332. Amlogic multi-dtb tool
  333. Single dtb detected
  334. ## Flattened Device Tree blob at 01000000
  335. Booting using the fdt blob at 0x1000000
  336. find 1 dtbos
  337. No androidboot.dtbo_idx configured
  338. And no dtbos will be applied
  339. libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
  340. [rsvmem] fdt get prop fail.
  341. Loading Device Tree to 000000001fff1000, end 000000001ffff770 ... OK
  342.  
  343. Starting kernel ...
  344.  
  345. uboot time: 5300760 us
  346. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
  347. [ 0.000000] Linux version 5.5.0-rc6 (piotro@) (gcc version 7.5.0 (GCC)) #1 SMP PREEMPT Tue Jan 14 16:45:28 CET 2020
  348. [ 0.000000] Machine model: SEI Robotics SEI610
  349. [ 0.000000] efi: Getting EFI parameters from FDT:
  350. [ 0.000000] efi: UEFI not found.
  351. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000040000000, size 896 MiB
  352. [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  353. [ 0.000000] On node 0 totalpages: 482560
  354. [ 0.000000] DMA zone: 4096 pages used for memmap
  355. [ 0.000000] DMA zone: 0 pages reserved
  356. [ 0.000000] DMA zone: 253184 pages, LIFO batch:63
  357. [ 0.000000] DMA32 zone: 3584 pages used for memmap
  358. [ 0.000000] DMA32 zone: 229376 pages, LIFO batch:63
  359. [ 0.000000] psci: probing for conduit method from DT.
  360. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  361. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  362. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  363. [ 0.000000] psci: SMC Calling Convention v1.1
  364. [ 0.000000] percpu: Embedded 31 pages/cpu s86296 r8192 d32488 u126976
  365. [ 0.000000] pcpu-alloc: s86296 r8192 d32488 u126976 alloc=31*4096
  366. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  367. [ 0.000000] Detected VIPT I-cache on CPU0
  368. [ 0.000000] CPU features: detected: Virtualization Host Extensions
  369. [ 0.000000] alternatives: patching kernel code
  370. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 474880
  371. [ 0.000000] Kernel command line: root=/dev/mmcblk0p2 rw console=ttyAML0,115200n8 console=tty0 logo.nologo vt.cur_default=1 de
  372. bug MM_DEBUG=yes mac=90:0e:b3:10:cd:a8
  373. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  374. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  375. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  376. [ 0.000000] software IO TLB: mapped [mem 0x39000000-0x3d000000] (64MB)
  377. [ 0.000000] Memory: 883636K/1930240K available (12988K kernel code, 1934K rwdata, 5572K rodata, 1536K init, 601K bss, 129100K
  378. reserved, 917504K cma-reserved)
  379. [ 0.000000] random: get_random_u64 called from cache_random_seq_create+0x8c/0x158 with crng_init=0
  380. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  381. [ 0.000000] ftrace: allocating 43820 entries in 172 pages
  382. [ 0.000000] ftrace: allocated 172 pages with 4 groups
  383. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  384. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  385. [ 0.000000] Tasks RCU enabled.
  386. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  387. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  388. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  389. [ 0.000000] GIC: Using split EOI/Deactivate mode
  390. [ 0.000000] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
  391. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  392. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  393. [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  394. [ 0.000204] Console: colour dummy device 80x25
  395. [ 0.000627] printk: console [tty0] enabled
  396. [ 0.000674] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  397. [ 0.000698] pid_max: default: 32768 minimum: 301
  398. [ 0.000942] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
  399. [ 0.000968] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
  400. [ 0.001049] *** VALIDATE tmpfs ***
  401. [ 0.001522] *** VALIDATE proc ***
  402. [ 0.001755] *** VALIDATE cgroup1 ***
  403. [ 0.001772] *** VALIDATE cgroup2 ***
  404. [ 0.023990] ASID allocator initialised with 32768 entries
  405. [ 0.031984] rcu: Hierarchical SRCU implementation.
  406. [ 0.041876] EFI services will not be available.
  407. [ 0.052071] smp: Bringing up secondary CPUs ...
  408. [ 0.084583] Detected VIPT I-cache on CPU1
  409. [ 0.084636] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
  410. [ 0.116649] Detected VIPT I-cache on CPU2
  411. [ 0.116692] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
  412. [ 0.148727] Detected VIPT I-cache on CPU3
  413. [ 0.148763] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
  414. [ 0.148881] smp: Brought up 1 node, 4 CPUs
  415. [ 0.148954] SMP: Total of 4 processors activated.
  416. [ 0.148967] CPU features: detected: Privileged Access Never
  417. [ 0.148980] CPU features: detected: User Access Override
  418. [ 0.148993] CPU features: detected: 32-bit EL0 Support
  419. [ 0.149004] CPU features: detected: Common not Private translations
  420. [ 0.149018] CPU features: detected: RAS Extension Support
  421. [ 0.149030] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
  422. [ 0.149048] CPU features: detected: CRC32 instructions
  423. [ 0.149909] CPU: All CPU(s) started at EL2
  424. [ 0.151248] devtmpfs: initialized
  425. [ 0.162548] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  426. [ 0.162592] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  427. [ 0.183304] pinctrl core: initialized pinctrl subsystem
  428. [ 0.184132] thermal_sys: Registered thermal governor 'fair_share'
  429. [ 0.184137] thermal_sys: Registered thermal governor 'bang_bang'
  430. [ 0.184162] thermal_sys: Registered thermal governor 'step_wise'
  431. [ 0.184177] thermal_sys: Registered thermal governor 'user_space'
  432. [ 0.184752] DMI not present or invalid.
  433. [ 0.185114] NET: Registered protocol family 16
  434. [ 0.186575] DMA: preallocated 256 KiB pool for atomic allocations
  435. [ 0.186630] audit: initializing netlink subsys (disabled)
  436. [ 0.186830] audit: type=2000 audit(0.184:1): state=initialized audit_enabled=0 res=1
  437. [ 0.188327] cpuidle: using governor ladder
  438. [ 0.188368] cpuidle: using governor menu
  439. [ 0.188622] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  440. [ 0.188889] Serial: AMBA PL011 UART driver
  441. [ 0.213629] cryptd: max_cpu_qlen set to 1000
  442. [ 0.219239] ACPI: Interpreter disabled.
  443. [ 0.220295] AO_5V: supplied by DC_IN
  444. [ 0.220477] VDDAO_3V3: supplied by DC_IN
  445. [ 0.220923] VDDIO_AO1V8: supplied by VDDAO_3V3
  446. [ 0.221115] EMMC_1V8: supplied by VDDAO_3V3
  447. [ 0.221491] iommu: Default domain type: Translated
  448. [ 0.221852] vgaarb: loaded
  449. [ 0.222684] SCSI subsystem initialized
  450. [ 0.222937] usbcore: registered new interface driver usbfs
  451. [ 0.222990] usbcore: registered new interface driver hub
  452. [ 0.223100] usbcore: registered new device driver usb
  453. [ 0.223668] pps_core: LinuxPPS API ver. 1 registered
  454. [ 0.223686] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  455. [ 0.223716] PTP clock support registered
  456. [ 0.223753] EDAC MC: Ver: 3.0.0
  457. [ 0.224353] Advanced Linux Sound Architecture Driver Initialized.
  458. [ 0.225274] clocksource: Switched to clocksource arch_sys_counter
  459. [ 0.763222] *** VALIDATE bpf ***
  460. [ 0.763593] *** VALIDATE ramfs ***
  461. [ 0.763972] pnp: PnP ACPI: disabled
  462. [ 0.771718] NET: Registered protocol family 2
  463. [ 0.772390] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
  464. [ 0.772439] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
  465. [ 0.772564] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
  466. [ 0.772770] TCP: Hash tables configured (established 16384 bind 16384)
  467. [ 0.772894] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
  468. [ 0.772941] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
  469. [ 0.773150] NET: Registered protocol family 1
  470. [ 0.773688] RPC: Registered named UNIX socket transport module.
  471. [ 0.773707] RPC: Registered udp transport module.
  472. [ 0.773720] RPC: Registered tcp transport module.
  473. [ 0.773733] RPC: Registered tcp NFSv4.1 backchannel transport module.
  474. [ 0.773752] NET: Registered protocol family 44
  475. [ 0.773773] PCI: CLS 0 bytes, default 64
  476. [ 0.774776] kvm [1]: IPA Size Limit: 40bits
  477. [ 0.774937] kvm [1]: vgic interrupt IRQ1
  478. [ 0.775098] kvm [1]: VHE mode initialized successfully
  479. [ 0.788424] Initialise system trusted keyrings
  480. [ 0.788611] workingset: timestamp_bits=46 max_order=19 bucket_order=0
  481. [ 0.795148] zbud: loaded
  482. [ 0.796912] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  483. [ 0.797588] NFS: Registering the id_resolver key type
  484. [ 0.797623] Key type id_resolver registered
  485. [ 0.797636] Key type id_legacy registered
  486. [ 0.797656] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  487. [ 0.811656] Key type asymmetric registered
  488. [ 0.811676] Asymmetric key parser 'x509' registered
  489. [ 0.811689] Key type pkcs7_test registered
  490. [ 0.811737] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
  491. [ 0.811907] io scheduler mq-deadline registered
  492. [ 0.811925] io scheduler kyber registered
  493. [ 0.812084] io scheduler bfq registered
  494. [ 0.832202] soc soc0: Amlogic Meson SM1 (Unknown) Revision 2b:c (10:2) Detected
  495. [ 0.833711] pwm-regulator regulator-vddcpu: Failed to get PWM: -517
  496. [ 0.834927] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  497. [ 0.837082] Serial: AMBA driver
  498. [ 0.837538] ff803000.serial: ttyAML0 at MMIO 0xff803000 (irq = 17, base_baud = 1500000) is a meson_uart
  499. [ 1.662365] printk: console [ttyAML0] enabled
  500. [ 1.667374] ffd24000.serial: ttyAML6 at MMIO 0xffd24000 (irq = 24, base_baud = 1500000) is a meson_uart
  501. [ 1.676129] serial serial0: tty port ttyAML6 registered
  502. [ 1.690966] libphy: Fixed MDIO Bus: probed
  503. [ 1.694433] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  504. [ 1.695927] ehci-pci: EHCI PCI platform driver
  505. [ 1.700381] ehci-platform: EHCI generic platform driver
  506. [ 1.705729] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  507. [ 1.711642] ohci-pci: OHCI PCI platform driver
  508. [ 1.716059] ohci-platform: OHCI generic platform driver
  509. [ 1.721412] uhci_hcd: USB Universal Host Controller Interface driver
  510. [ 1.727996] usbcore: registered new interface driver uas
  511. [ 1.732801] usbcore: registered new interface driver usb-storage
  512. [ 1.738733] usbcore: registered new interface driver ums-alauda
  513. [ 1.744597] usbcore: registered new interface driver ums-cypress
  514. [ 1.750551] usbcore: registered new interface driver ums-datafab
  515. [ 1.756504] usbcore: registered new interface driver ums_eneub6250
  516. [ 1.762621] usbcore: registered new interface driver ums-freecom
  517. [ 1.768575] usbcore: registered new interface driver ums-isd200
  518. [ 1.774441] usbcore: registered new interface driver ums-jumpshot
  519. [ 1.780475] usbcore: registered new interface driver ums-karma
  520. [ 1.786251] usbcore: registered new interface driver ums-onetouch
  521. [ 1.792307] usbcore: registered new interface driver ums-realtek
  522. [ 1.798251] usbcore: registered new interface driver ums-sddr09
  523. [ 1.804109] usbcore: registered new interface driver ums-sddr55
  524. [ 1.809988] usbcore: registered new interface driver ums-usbat
  525. [ 1.815822] usbcore: registered new interface driver usbserial_generic
  526. [ 1.822227] usbserial: USB Serial support registered for generic
  527. [ 1.830288] mousedev: PS/2 mouse device common for all mice
  528. [ 1.838291] sdhci: Secure Digital Host Controller Interface driver
  529. [ 1.839778] sdhci: Copyright(c) Pierre Ossman
  530. [ 1.844953] Synopsys Designware Multimedia Card Interface Driver
  531. [ 1.852217] meson-gx-mmc ffe05000.sd: Got CD GPIO
  532. [ 1.881801] meson-gx-mmc ffe07000.mmc: allocated mmc-pwrseq
  533. [ 1.907687] sdhci-pltfm: SDHCI platform and OF driver helper
  534. [ 1.909888] ledtrig-cpu: registered to indicate activity on CPUs
  535. [ 1.914355] meson-sm: secure-monitor enabled
  536. [ 1.918228] hid: raw HID events driver (C) Jiri Kosina
  537. [ 1.920513] mmc0: new high speed SDXC card at address 5048
  538. [ 1.923246] usbcore: registered new interface driver usbhid
  539. [ 1.929222] mmcblk0: mmc0:5048 SD64G 59.7 GiB
  540. [ 1.934050] usbhid: USB HID core driver
  541. [ 1.949583] drop_monitor: Initializing network drop monitor service
  542. [ 1.950402] NET: Registered protocol family 17
  543. [ 1.954884] Key type dns_resolver registered
  544. [ 1.959399] registered taskstats version 1
  545. [ 1.962923] Loading compiled-in X.509 certificates
  546. [ 1.967775] zswap: loaded using pool lzo/zbud
  547. [ 1.993070] blk_update_request: I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
  548. [ 1.995895] VDDAO_3V3_T: supplied by VDDAO_3V3
  549. [ 1.997630] Buffer I/O error on dev mmcblk0, logical block 0, async page read
  550. [ 2.000240] blk_update_request: I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
  551. [ 2.005015] pwm-regulator regulator-vddcpu: Failed to get PWM: -517
  552. [ 2.009182] Buffer I/O error on dev mmcblk0, logical block 0, async page read
  553. [ 2.020072] meson-drm ff900000.vpu: Queued 2 outputs on vpu
  554. [ 2.028120] blk_update_request: I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
  555. [ 2.032867] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  556. [ 2.038044] Buffer I/O error on dev mmcblk0, logical block 0, async page read
  557. [ 2.048188] [drm] No driver support for vblank timestamp query.
  558. [ 2.054754] mmcblk0: unable to read partition table
  559. [ 2.061872] meson-drm ff900000.vpu: CVBS Output connector not available
  560. [ 2.095718] mmc1: new HS200 MMC card at address 0001
  561. [ 2.096441] mmcblk1: mmc1:0001 400073 14.7 GiB
  562. [ 2.099917] mmcblk1boot0: mmc1:0001 400073 partition 1 4.00 MiB
  563. [ 2.105778] mmcblk1boot1: mmc1:0001 400073 partition 2 4.00 MiB
  564. [ 2.111379] meson-dw-hdmi ff600000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
  565. [ 2.121243] mmcblk1rpmb: mmc1:0001 400073 partition 3 4.00 MiB, chardev (241:0)
  566. [ 2.128510] meson-dw-hdmi ff600000.hdmi-tx: registered DesignWare HDMI I2C bus driver
  567. [ 2.137025] meson-drm ff900000.vpu: bound ff600000.hdmi-tx (ops meson_dw_hdmi_ops)
  568. [ 2.144963] [drm] Initialized meson 1.0.0 20161109 for ff900000.vpu on minor 0
  569. [ 2.188369] random: fast init done
  570. [ 2.467130] Console: switching to colour frame buffer device 240x67
  571. [ 2.501151] meson-drm ff900000.vpu: fb0: mesondrmfb frame buffer device
  572. [ 2.508451] meson8b-dwmac ff3f0000.ethernet: IRQ eth_wake_irq not found
  573. [ 2.514274] meson8b-dwmac ff3f0000.ethernet: IRQ eth_lpi not found
  574. [ 2.520493] meson8b-dwmac ff3f0000.ethernet: PTP uses main clock
  575. [ 2.526349] meson8b-dwmac ff3f0000.ethernet: no reset control found
  576. [ 2.537472] meson8b-dwmac ff3f0000.ethernet: User ID: 0x11, Synopsys ID: 0x37
  577. [ 2.539616] meson8b-dwmac ff3f0000.ethernet: DWMAC1000
  578. [ 2.544807] meson8b-dwmac ff3f0000.ethernet: DMA HW capability register supported
  579. [ 2.552219] meson8b-dwmac ff3f0000.ethernet: RX Checksum Offload Engine supported
  580. [ 2.559634] meson8b-dwmac ff3f0000.ethernet: COE Type 2
  581. [ 2.564808] meson8b-dwmac ff3f0000.ethernet: TX Checksum insertion supported
  582. [ 2.571796] meson8b-dwmac ff3f0000.ethernet: Wake-Up On Lan supported
  583. [ 2.578213] meson8b-dwmac ff3f0000.ethernet: Normal descriptors
  584. [ 2.584044] meson8b-dwmac ff3f0000.ethernet: Ring mode enabled
  585. [ 2.589821] meson8b-dwmac ff3f0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  586. [ 2.597908] libphy: stmmac: probed
  587. [ 2.604452] pwm-regulator regulator-vddcpu: Failed to get PWM: -517
  588. [ 2.610338] pwm-regulator regulator-vddcpu: Failed to get PWM: -517
  589. [ 2.614318] hctosys: unable to open rtc device (rtc0)
  590. [ 2.619030] ALSA device list:
  591. [ 2.621483] No soundcards found.
  592. [ 2.625122] VFS: Cannot open root device "mmcblk0p2" or unknown-block(179,2): error -6
  593. [ 2.632811] Please append a correct "root=" boot option; here are the available partitions:
  594. [ 2.640978] b300 62574592 mmcblk0
  595. [ 2.640981] driver: mmcblk
  596. [ 2.647696] b320 15388672 mmcblk1
  597. [ 2.647698] driver: mmcblk
  598. [ 2.654424] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2)
  599. [ 2.662779] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.5.0-rc6 #1
  600. [ 2.668898] Hardware name: SEI Robotics SEI610 (DT)
  601. [ 2.673728] Call trace:
  602. [ 2.676153] dump_backtrace+0x0/0x200
  603. [ 2.679769] show_stack+0x24/0x30
  604. [ 2.683046] dump_stack+0xa8/0xd0
  605. [ 2.686324] panic+0x168/0x374
  606. [ 2.689343] mount_block_root+0x194/0x254
  607. [ 2.693308] mount_root+0x134/0x168
  608. [ 2.696759] prepare_namespace+0x140/0x180
  609. [ 2.700812] kernel_init_freeable+0x228/0x244
  610. [ 2.705125] kernel_init+0x18/0x110
  611. [ 2.708574] ret_from_fork+0x10/0x18
  612. [ 2.712113] SMP: stopping secondary CPUs
  613. [ 2.716767] Kernel Offset: disabled
  614. [ 2.721320] CPU features: 0x00002,2a00aa10
  615. [ 2.725837] Memory Limit: none
  616. [ 2.730292] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2) ]---
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!