API tools faq
paste
Advertisement
bolloape

Untitled

bolloape
May 10th, 2024 (edited)
153
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 35.18 KB | Source Code | 0 0
raw download clone embed print report
  1. debian@duos:~$ lsusb
  2. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  3. Bus 001 Device 002: ID 0781:5581 SanDisk Corp. Ultra
  4.  
  5. debian@duos:~$ df -h
  6. Filesystem                                  Size  Used Avail Use% Mounted on
  7. /dev/root                                    15G  2.3G   12G  17% /
  8. devtmpfs                                    244M     0  244M   0% /dev
  9. tmpfs                                       244M     0  244M   0% /dev/shm
  10. tmpfs                                        98M  668K   97M   1% /run
  11. tmpfs                                       5.0M   12K  5.0M   1% /run/lock
  12. /dev/mmcblk0p1                              100M  8.7M   92M   9% /boot
  13. 192.168.178.118:/volume1/bettersaul-muziek  5.3T  2.0T  3.3T  38% /var/nfs/lms
  14. tmpfs                                        49M  8.0K   49M   1% /run/user/1000
  15.  
  16.  
  17. debian@duos:~$ usb-devices
  18.  
  19. T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
  20. D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
  21. P:  Vendor=1d6b ProdID=0002 Rev=05.10
  22. S:  Manufacturer=Linux 5.10.4-20240329-1+ dwc2_hsotg
  23. S:  Product=DWC OTG Controller
  24. S:  SerialNumber=4340000.usb
  25. C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
  26. I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
  27. E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms
  28.  
  29. T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  4 Spd=480  MxCh= 0
  30. D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
  31. P:  Vendor=0781 ProdID=5581 Rev=01.00
  32. S:  Manufacturer=SanDisk
  33. S:  Product=Ultra
  34. S:  SerialNumber=4C530001220611100233
  35. C:  #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=224mA
  36. I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
  37. E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
  38. E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
  39. debian@duos:~$ usb-devices
  40.  
  41.  
  42.  
  43. ebian@duos:~$  553.268782] bm-dwmac 4070000.ethernet end0: Link is Up - 100Mbps/Full - flow control rx/tx
  44. [  673.063167] bm-dwmac 4070000.ethernet end0: Link is Down
  45. [  677.514681] usb 1-1: USB disconnect, device number 2
  46. [  682.062191] usb 1-1: new high-speed USB device number 3 using dwc2
  47.  
  48.  
  49. complete dmesg
  50.  
  51. bian@duos:~$ dmesg
  52. [    0.008411] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000)
  53. [    0.019121] pid_max: default: 4096 minimum: 301
  54. [    0.024018] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
  55. [    0.031523] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
  56. [    0.041426] ASID allocator initialised with 65536 entries
  57. [    0.047129] rcu: Hierarchical SRCU implementation.
  58. [    0.052609] EFI services will not be available.
  59. [    0.057797] devtmpfs: initialized
  60. [    0.066720] early_time_log: do_initcalls: 8987710us
  61. [    0.072671] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  62. [    0.082721] futex hash table entries: 16 (order: -4, 384 bytes, linear)
  63. [    0.089755] pinctrl core: initialized pinctrl subsystem
  64. [    0.095737] NET: Registered protocol family 16
  65. [    0.100738] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
  66. [    0.108050] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  67. [    0.116811] thermal_sys: Registered thermal governor 'step_wise'
  68. [    0.130138] OF: /gpio@03020000/gpio-controller@0: could not find phandle
  69. [    0.143354] OF: /gpio@03021000/gpio-controller@1: could not find phandle
  70. [    0.150333] OF: /gpio@03022000/gpio-controller@2: could not find phandle
  71. [    0.157319] OF: /gpio@03023000/gpio-controller@3: could not find phandle
  72. [    0.164309] OF: /gpio@05021000/gpio-controller@4: could not find phandle
  73. [    0.172983] clk reset: nr_reset=64 resource_size=8
  74. [    0.178417] get audio clk=24576000
  75. [    0.181946] cvitek-i2s-subsys 4108000.i2s_subsys: Set clk_sdma_aud0~3 to 24576000
  76. [    0.200793] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  77. [    0.207874] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  78. [    0.222006] dw_dmac 4330000.dma: CVITEK DMA Controller, 8 channels, probe done!
  79. [    0.230294] usbcore: registered new interface driver usbfs
  80. [    0.236237] usbcore: registered new interface driver hub
  81. [    0.241817] usbcore: registered new device driver usb
  82. [    0.248700] mc: Linux media interface: v0.10
  83. [    0.253141] videodev: Linux video capture interface: v2.00
  84. [    0.259553] Advanced Linux Sound Architecture Driver Initialized.
  85. [    0.266476] Bluetooth: Core ver 2.22
  86. [    0.270201] NET: Registered protocol family 31
  87. [    0.274782] Bluetooth: HCI device and connection manager initialized
  88. [    0.281417] Bluetooth: HCI socket layer initialized
  89. [    0.286523] Bluetooth: L2CAP socket layer initialized
  90. [    0.291866] Bluetooth: SCO socket layer initialized
  91. [    0.297639] clocksource: Switched to clocksource riscv_clocksource
  92. [    0.306463] NET: Registered protocol family 2
  93. [    0.311965] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
  94. [    0.320663] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
  95. [    0.328668] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
  96. [    0.336112] TCP: Hash tables configured (established 4096 bind 4096)
  97. [    0.342833] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
  98. [    0.349606] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
  99. [    0.357040] NET: Registered protocol family 1
  100. [    0.362195] RPC: Registered named UNIX socket transport module.
  101. [    0.368321] RPC: Registered udp transport module.
  102. [    0.373188] RPC: Registered tcp transport module.
  103. [    0.378109] RPC: Registered tcp NFSv4.1 backchannel transport module.
  104. [    0.386231] Initialise system trusted keyrings
  105. [    0.391077] workingset: timestamp_bits=46 max_order=17 bucket_order=0
  106. [    0.406280] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  107. [    0.413277] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  108. [    0.420712] jffs2: version 2.2. (NAND) \xc2\xa9 2001-2006 Red Hat, Inc.
  109. [    0.427471] fuse: init (API version 7.32)
  110. [    0.486914] Key type asymmetric registered
  111. [    0.491180] Asymmetric key parser 'x509' registered
  112. [    0.496239] Asymmetric key parser 'pkcs8' registered
  113. [    0.502296] gpio-495 (wifi_pwr): hogged as output/high
  114. [    0.512277] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
  115. [    0.521195] printk: console [ttyS0] disabled
  116. [    0.525741] 4140000.serial: ttyS0 at MMIO 0x4140000 (irq = 14, base_baud = 1562500) is a 16550A
  117. [    0.534775] printk: console [ttyS0] enabled
  118. [    0.543356] printk: bootconsole [sbi0] disabled
  119. [    0.553740] 41c0000.serial: ttyS4 at MMIO 0x41c0000 (irq = 15, base_baud = 1562500) is a 16550A
  120. [    0.563959] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
  121. [    0.572115] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
  122. [    0.582803] libphy: Fixed MDIO Bus: probed
  123. [    0.587090] tun: Universal TUN/TAP device driver, 1.6
  124. [    0.592986] bm-dwmac 4070000.ethernet: IRQ eth_wake_irq not found
  125. [    0.599379] bm-dwmac 4070000.ethernet: IRQ eth_lpi not found
  126. [    0.605387] bm-dwmac 4070000.ethernet: Hash table entries set to unexpected value 0
  127. [    0.613461] bm-dwmac 4070000.ethernet: no reset control found
  128. [    0.619683] bm-dwmac 4070000.ethernet: User ID: 0x10, Synopsys ID: 0x37
  129. [    0.626594] bm-dwmac 4070000.ethernet:       DWMAC1000
  130. [    0.631492] bm-dwmac 4070000.ethernet: DMA HW capability register supported
  131. [    0.638712] bm-dwmac 4070000.ethernet: RX Checksum Offload Engine supported
  132. [    0.645931] bm-dwmac 4070000.ethernet: COE Type 2
  133. [    0.650818] bm-dwmac 4070000.ethernet: TX Checksum insertion supported
  134. [    0.657588] bm-dwmac 4070000.ethernet: Normal descriptors
  135. [    0.663193] bm-dwmac 4070000.ethernet: Ring mode enabled
  136. [    0.668710] bm-dwmac 4070000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  137. [    0.676469] bm-dwmac 4070000.ethernet: device MAC address 3e:7b:15:cc:77:3c
  138. [    0.710071] libphy: stmmac: probed
  139. [    0.713610] CVITEK CV182XA stmmac-0:00: attached PHY driver [CVITEK CV182XA] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
  140. [    0.724834] CVITEK CV182XA stmmac-0:01: attached PHY driver [CVITEK CV182XA] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
  141. [    0.737059] bm-dwmac 4070000.ethernet: Cannot get clk_500m_eth!
  142. [    0.743333] bm-dwmac 4070000.ethernet: Cannot get gate_clk_axi4!
  143. [    0.749854] PPP generic driver version 2.4.2
  144. [    0.754585] NET: Registered protocol family 24
  145. [    0.759257] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
  146. [    0.767293] dwc2 4340000.usb: axi clk installed
  147. [    0.772036] dwc2 4340000.usb: apb clk installed
  148. [    0.776749] dwc2 4340000.usb: 125m clk installed
  149. [    0.781552] dwc2 4340000.usb: 33k clk installed
  150. [    0.786264] dwc2 4340000.usb: 12m clk installed
  151. [    0.791054] dwc2 4340000.usb: EPs: 8, dedicated fifos, 3072 entries in SPRAM
  152. [    0.798851] dwc2 4340000.usb: DWC OTG Controller
  153. [    0.803709] dwc2 4340000.usb: new USB bus registered, assigned bus number 1
  154. [    0.810970] dwc2 4340000.usb: irq 35, io mem 0x04340000
  155. [    0.817281] hub 1-0:1.0: USB hub found
  156. [    0.821288] hub 1-0:1.0: 1 port detected
  157. [    0.827434] mousedev: PS/2 mouse device common for all mice
  158. [    0.833590] i2c /dev entries driver
  159. [    0.839080] cooling cv181x_cooling: elems of dev-freqs=6
  160. [    0.844644] cooling cv181x_cooling: dev_freqs[0]: 850000000 500000000
  161. [    0.851330] cooling cv181x_cooling: dev_freqs[1]: 425000000 375000000
  162. [    0.858012] cooling cv181x_cooling: dev_freqs[2]: 425000000 300000000
  163. [    0.864897] cooling cv181x_cooling: Cooling device registered: cooling
  164. [    0.872707] Bluetooth: HCI UART driver ver 2.3
  165. [    0.877355] Bluetooth: HCI UART protocol H4 registered
  166. [    0.883148] sdhci: Secure Digital Host Controller Interface driver
  167. [    0.889576] sdhci: Copyright(c) Pierre Ossman
  168. [    0.894103] sdhci-pltfm: SDHCI platform and OF driver helper
  169. [    0.900190] cvi:sdhci_cvi_probe
  170. [    0.949653] mmc0: SDHCI controller on 4310000.cv-sd [4310000.cv-sd] using ADMA 64-bit
  171. [    0.957813] cvi_proc_init cvi_host 0x(____ptrval____)
  172. [    0.963245] cvi:sdhci_cvi_probe
  173. [    1.004867] mmc1: SDHCI controller on 4320000.wifi-sd [4320000.wifi-sd] using ADMA 64-bit
  174. [    1.015582] ledtrig-cpu: registered to indicate activity on CPUs
  175. [    1.022420] usbcore: registered new interface driver usbhid
  176. [    1.028331] usbhid: USB HID core driver
  177. [    1.034152] cvitek-i2s 4100000.i2s: cvi_i2s_probe
  178. [    1.039735] cvitek-i2s 4130000.i2s: cvi_i2s_probe
  179. [    1.050447] cviteka-adc sound_adc: cviteka_adc_probe, dev name=sound_adc
  180. [    1.058691] cviteka-adc sound_adc: cviteka_adc_probe start devm_snd_soc_register_card
  181. [    1.067308] cvitekaadc 300a100.adc: cvitekaadc_probe
  182. [    1.078328] cviteka-dac sound_dac: cviteka_dac_probe, dev name=sound_dac
  183. [    1.085924] cvitekadac 300a000.dac: cvitekadac_probe
  184. [    1.094583] cvitekadac_probe gpio_is_valid mute_pin_l
  185. [    1.099946] cvitekadac_probe gpio_is_valid mute_pin_r
  186. [    1.112555] mmc1: new high speed SDIO card at address 390b
  187. [    1.126788] ipip: IPv4 and MPLS over IPv4 tunneling driver
  188. [    1.134188] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
  189. [    1.142343] NET: Registered protocol family 10
  190. [    1.149371] Segment Routing with IPv6
  191. [    1.154180] NET: Registered protocol family 17
  192. [    1.159186] Bluetooth: RFCOMM TTY layer initialized
  193. [    1.164467] Bluetooth: RFCOMM socket layer initialized
  194. [    1.169988] Bluetooth: RFCOMM ver 1.11
  195. [    1.174061] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  196. [    1.179689] Bluetooth: BNEP filters: protocol multicast
  197. [    1.185222] Bluetooth: BNEP socket layer initialized
  198. [    1.190485] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  199. [    1.196735] Bluetooth: HIDP socket layer initialized
  200. [    1.202263] Loading compiled-in X.509 certificates
  201. [    1.211158] random: fast init done
  202. [    1.242342] cviteka-adc sound_adc: cviteka_adc_probe, dev name=sound_adc
  203. [    1.249441] cviteka-adc sound_adc: cviteka_adc_probe start devm_snd_soc_register_card
  204. [    1.265240] cviteka-dac sound_dac: cviteka_dac_probe, dev name=sound_dac
  205. [    1.280011] ALSA device list:
  206. [    1.283429] dw-apb-uart 4140000.serial: forbid DMA for kernel console
  207. [    1.290300] Waiting for root device /dev/mmcblk0p2...
  208. [    3.382519] mmc0: new ultra high speed SDR104 SDHC card at address 0001
  209. [    3.390285] mmcblk0: mmc0:0001 SD16G 14.5 GiB
  210. [    3.397496]  mmcblk0: p1 p2
  211. [    3.844709] EXT4-fs (mmcblk0p2): recovery complete
  212. [    3.853480] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  213. [    3.861948] VFS: Mounted root (ext4 filesystem) on device 179:2.
  214. [    3.868415] random: crng init done
  215. [    3.872223] devtmpfs: mounted
  216. [    3.875478] Freeing unused kernel memory: 156K
  217. [    3.880103] Kernel memory protection not selected by kernel config.
  218. [    3.886614] Run /sbin/init as init process
  219. [    3.890894]   with arguments:
  220. [    3.890900]     /sbin/init
  221. [    3.890905]   with environment:
  222. [    3.890910]     HOME=/
  223. [    3.890915]     TERM=linux
  224. [    3.890924] early_time_log: run_init_process: 12811919us
  225. [    4.201888] systemd[1]: System time before build time, advancing clock.
  226. [    4.226465] systemd[1]: Failed to find module 'autofs4'
  227. [    4.281193] systemd[1]: systemd 255.5-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
  228. [    4.314324] systemd[1]: Detected architecture riscv64.
  229. [    4.340745] systemd[1]: Hostname set to <duos>.
  230. [    5.629263] systemd[1]: Configuration file /etc/systemd/system/lms.service is marked executable. Please remove executable permission bits. Proceeding anyway.
  231. [    6.261011] systemd[1]: Queued start job for default target graphical.target.
  232. [    6.285613] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
  233. [    6.314422] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
  234. [    6.346662] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
  235. [    6.378447] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
  236. [    6.408976] systemd[1]: Created slice user.slice - User and Session Slice.
  237. [    6.434580] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
  238. [    6.462462] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
  239. [    6.490349] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc).
  240. [    6.510629] systemd[1]: Expecting device dev-mmcblk0p1.device - /dev/mmcblk0p1...
  241. [    6.533916] systemd[1]: Expecting device dev-ttyS0.device - /dev/ttyS0...
  242. [    6.557945] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
  243. [    6.582062] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
  244. [    6.610186] systemd[1]: Reached target paths.target - Path Units.
  245. [    6.630200] systemd[1]: Reached target slices.target - Slice Units.
  246. [    6.650109] systemd[1]: Reached target swap.target - Swaps.
  247. [    6.670088] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
  248. [    6.699685] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket.
  249. [    6.727182] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
  250. [    6.754574] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
  251. [    6.783497] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
  252. [    6.811547] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
  253. [    6.839647] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
  254. [    6.866045] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
  255. [    6.884230] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
  256. [    6.911386] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
  257. [    6.946666] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
  258. [    6.986775] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
  259. [    7.054727] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
  260. [    7.102563] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing).
  261. [    7.166443] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
  262. [    7.255323] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
  263. [    7.315395] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
  264. [    7.387264] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
  265. [    7.466989] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
  266. [    7.558880] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
  267. [    7.654873] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
  268. [    7.750901] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
  269. [    7.814678] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
  270. [    7.884057] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
  271. [    7.945774] systemd[1]: systemd-journald.service: (This warning is only shown for the first unit using IP firewalling.)
  272. [    8.003326] systemd[1]: Starting systemd-journald.service - Journal Service...
  273. [    8.074869] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
  274. [    8.118080] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
  275. [    8.190599] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
  276. [    8.242321] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
  277. [    8.339231] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
  278. [    8.470955] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
  279. [    8.522867] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
  280. [    8.579143] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
  281. [    8.624291] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
  282. [    8.711202] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  283. [    8.768954] systemd[1]: modprobe@configfs.service: Deactivated successfully.
  284. [    8.802017] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
  285. [    8.849149] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
  286. [    8.875699] systemd-journald[134]: Collecting audit messages is disabled.
  287. [    8.886034] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
  288. [    8.929130] systemd[1]: modprobe@drm.service: Deactivated successfully.
  289. [    8.955492] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
  290. [    9.001200] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
  291. [    9.035413] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
  292. [    9.081135] systemd[1]: modprobe@fuse.service: Deactivated successfully.
  293. [    9.107545] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
  294. [    9.153124] systemd[1]: modprobe@loop.service: Deactivated successfully.
  295. [    9.179621] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
  296. [    9.224670] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
  297. [    9.268489] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
  298. [    9.346462] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
  299. [    9.422180] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
  300. [    9.484832] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
  301. [    9.554253] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
  302. [    9.682912] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...
  303. [    9.738330] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
  304. [    9.807164] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
  305. [    9.883003] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
  306. [    9.958081] systemd[1]: systemd-tpm2-setup.service - TPM2 SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
  307. [   10.045146] systemd[1]: Started systemd-journald.service - Journal Service.
  308. [   10.878574] systemd-journald[134]: Received client request to flush runtime journal.
  309. [   10.910039] systemd-journald[134]: File /var/log/journal/c03da64a6ad644f68135c98176fbeeb9/system.journal corrupted or uncleanly shut down, renaming and replacing.
  310. [   12.705192] bm-dwmac 4070000.ethernet end0: renamed from eth0
  311. [   13.309824] cvitek_mailbox: bad vermagic: kernel tainted.
  312. [   13.397251] Disabling lock debugging due to kernel taint
  313. [   13.462702] cvitek-mailbox 1900000.mbox: CVITEK mailbox probe
  314. [   13.998283] (NULL device *): RTC invalid time
  315. [   14.016731] aicbsp_init
  316. [   14.061847] cvi_rtc 5026000.rtc: time read as 0. 1/1/1970 0:00:00
  317. [   14.068231] RELEASE_DATE:2024_0109_ec460377
  318. [   14.124640] aicbsp_resv_mem_init
  319. [   14.149745] cvi_rtc 5026000.rtc: CVITEK current time 0
  320. [   14.161969] remoteproc remoteproc0: cv181x-c906_1 is available
  321. [   14.220741] cvi_rtc 5026000.rtc: CVITEK current alarm -1
  322. [   14.302102] (NULL device *): RTC invalid time
  323. [   14.353092] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  324. [   14.373760] cvi_rtc 5026000.rtc: time read as 0. 1/1/1970 0:00:00
  325. [   14.438333] cvi_rtc 5026000.rtc: registered as rtc0
  326. [   14.515444] (NULL device *): RTC invalid time
  327. [   14.573882] cvi_rtc 5026000.rtc: time read as 0. 1/1/1970 0:00:00
  328. [   14.629754] cvi_rtc 5026000.rtc: setting system clock to 1970-01-01T00:00:00 UTC (0)
  329. [   14.698055] cvi_rtc 5026000.rtc: Disable calibration because using external xtal
  330. [   14.770889] cvitekaadc 300a100.adc: ADC get Vol, reg:16,ret:0x10001, idx=0.
  331. [   14.783446] cvitekadac 300a000.dac: dac_reg_read reg:0,ret:0x0.
  332. [   14.829711] cvi_rtc 5026000.rtc: CVITEK real time clock
  333. [   14.877493] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  334. [   14.885835] cvitekadac 300a000.dac: Get DAC Vol reg:16,ret:0xff00ff temp_lval=16.
  335. [   14.961397] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
  336. [   14.994465] cvitekadac 300a000.dac: dac_reg_read reg:16,ret:0x100010.
  337. [   15.053852] cvitekadac 300a000.dac: dac_reg_write reg:16,value:0x0.
  338. [   15.093962] aicbsp: aicbsp_set_subsys, subsys: AIC_WIFI, state to: 1
  339. [   15.113611] cvitekadac 300a000.dac: dac_reg_read reg:40,ret:0x0.
  340. [   15.137777] aicbsp: aicbsp_set_subsys, power state change to 1 dure to AIC_WIFI
  341. [   15.177889] aicbsp: aicbsp_platform_power_on
  342. [   15.275926] aicbsp: aicbsp_sdio_probe:1 vid:0xC8A1  did:0x0082
  343. [   15.301753] aicbsp: aicbsp_sdio_probe:2 vid:0xC8A1  did:0x0182
  344. [   15.321717] aicbsp: aicbsp_sdio_probe after replace:1
  345. [   15.342108] aicbsp: aicbsp_get_feature, set FEATURE_SDIO_CLOCK 25 MHz
  346. [   15.381704] aicbsp: aicwf_sdio_reg_init
  347. [   15.418237] rwnx_load_firmware :firmware path = /lib/firmware/aic8800_sdio/aic8800/fw_patch_table_8800d80_u02.bin
  348. [   15.456208] file md5:0e6fd98c0a89c62ebd4c1a430fafa59f
  349. [   15.485858] rwnx_plat_bin_fw_upload_android
  350. [   15.501737] rwnx_load_firmware :firmware path = /lib/firmware/aic8800_sdio/aic8800/fw_adid_8800d80_u02.bin
  351. [   15.546664] file md5:f546881a81b960d89a672578eb45a809
  352. [   15.566718] rwnx_plat_bin_fw_upload_android
  353. [   15.585748] rwnx_load_firmware :firmware path = /lib/firmware/aic8800_sdio/aic8800/fw_patch_8800d80_u02.bin
  354. [   15.627424] file md5:9e3808a312cc19925259a6c5163753d5
  355. [   15.694381] aicbt_patch_table_load bt btmode[3]:5
  356. [   15.713741] aicbt_patch_table_load bt uart_baud[3]:1500000
  357. [   15.734024] aicbt_patch_table_load bt uart_flowctrl[3]:1
  358. [   15.761733] aicbt_patch_table_load bt lpm_enable[3]:0
  359. [   15.773779] aicbt_patch_table_load bt tx_pwr[3]:28463
  360. [   15.801754] aicbsp: bt patch version: - Nov 06 2023 12:44:17 - git 1f5d13b
  361. [   15.825816] rwnx_plat_bin_fw_upload_android
  362. [   15.841731] rwnx_load_firmware :firmware path = /lib/firmware/aic8800_sdio/aic8800/fmacfw_8800d80_u02.bin
  363. [   15.897954] file md5:2aa840eaea976e7fb87e33fd9e82a653
  364. [   16.074817] aicbsp: aicbsp_get_feature, set FEATURE_SDIO_CLOCK 25 MHz
  365. [   16.087971] aicsdio: aicwf_sdio_reg_init
  366. [   16.108585] aicbsp: aicbsp_resv_mem_alloc_skb, alloc resv_mem_txdata succuss, id: 0, size: 98304
  367. [   16.120480] aicbsp: sdio_err:<aicwf_sdio_bus_pwrctl,1374>: bus down
  368. [   16.132197] aicbsp: aicbsp_get_feature, set FEATURE_SDIO_CLOCK 25 MHz
  369. [   16.807089] ieee80211 phy0: HT supp 1, VHT supp 1, HE supp 1
  370. [   16.841924] ieee80211 phy0:
  371.                *******************************************************
  372.                ** CAUTION: USING PERMISSIVE CUSTOM REGULATORY RULES **
  373.                *******************************************************
  374. [   21.871173] cvitekaadc 300a100.adc: ADC get Vol, reg:16,ret:0x10001, idx=0.
  375. [   21.934914] cvitekadac 300a000.dac: dac_reg_read reg:0,ret:0x0.
  376. [   21.978668] cvitekadac 300a000.dac: Get DAC Vol reg:16,ret:0x0 temp_lval=0.
  377. [   22.032064] cvitekadac 300a000.dac: dac_reg_read reg:16,ret:0x0.
  378. [   22.081978] cvitekadac 300a000.dac: dac_reg_read reg:40,ret:0x0.
  379. [   22.161250] dw-apb-uart 41c0000.serial: failed to request DMA
  380. [   24.119677] NET: Registered protocol family 38
  381. [   25.817106] bm-dwmac 4070000.ethernet end0: PHY [stmmac-0:00] driver [CVITEK CV182XA] (irq=POLL)
  382. [   25.845736] dwmac1000: Master AXI performs any burst length
  383. [   25.857723] bm-dwmac 4070000.ethernet end0: No Safety Features support found
  384. [   25.873775] bm-dwmac 4070000.ethernet end0: IEEE 1588-2002 Timestamp supported
  385. [   25.901047] bm-dwmac 4070000.ethernet end0: configuring for phy/rmii link mode
  386. [   26.135965] aicwf_sdio mmc1:390b:1 wlan0: CLOSE
  387. [   26.145092] rwnx_send_msg1 (9)MM_REMOVE_IF_CFM reqcfm:1 in_irq:0 in_softirq:0 in_atomic:0
  388. [   26.155388] ieee80211 phy0: HT supp 1, VHT supp 1, HE supp 1
  389. [   26.981942] rwnx_virtual_interface_add: 10, p2p-dev-wlan0
  390. [   27.017496] rwnx_virtual_interface_add, ifname=p2p-dev-wlan0, wdev=00000000fb59a762, vif_idx=1
  391. [   27.081913] p2p dev addr=88 0 33 77 51 d3
  392. [   27.427512] P2P interface started
  393. [   28.377771] usb 1-1: new high-speed USB device number 2 using dwc2
  394. [   29.864587] aicwf_sdio mmc1:390b:1 wlan0: CLOSE
  395. [   29.873724] rwnx_send_msg1 (9)MM_REMOVE_IF_CFM reqcfm:1 in_irq:0 in_softirq:0 in_atomic:0
  396. [   29.895358] ieee80211 phy0: HT supp 1, VHT supp 1, HE supp 1
  397. [   30.035234] bm-dwmac 4070000.ethernet end0: Link is Up - 100Mbps/Full - flow control rx/tx
  398. [   30.069777] IPv6: ADDRCONF(NETDEV_CHANGE): end0: link becomes ready
  399. [   30.810180] rwnx_send_sm_connect_req drv_vif_index:0 connect to mightyboosh(11) channel:5540 auth_type:0
  400. [   31.156386] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  401. [   33.700665] systemd-journald[134]: Failed to set ACL on /var/log/journal/c03da64a6ad644f68135c98176fbeeb9/user-1000.journal, ignoring: Operation not supported
  402. [   33.769823] systemd-journald[134]: /var/log/journal/c03da64a6ad644f68135c98176fbeeb9/user-1000.journal: Journal file uses a different sequence number ID, rotating.
  403. [   35.539827] systemd-journald[134]: Failed to set ACL on /var/log/journal/c03da64a6ad644f68135c98176fbeeb9/user-1000.journal, ignoring: Operation not supported
  404. [   46.418056] bm-dwmac 4070000.ethernet end0: Link is Down
  405. [   49.491172] bm-dwmac 4070000.ethernet end0: Link is Up - 100Mbps/Full - flow control rx/tx
  406. [   60.605697] cvi_rtc 5026000.rtc: time set to 1715958321. 5/17/2024 15:05:21
  407. [   60.612955] cvi_rtc 5026000.rtc: time read as 1715958321. 5/17/2024 15:05:21
  408. [   90.449959] bm-dwmac 4070000.ethernet end0: Link is Down
  409. [  137.612269] Key type dns_resolver registered
  410. [  137.653424] NFS: Registering the id_resolver key type
  411. [  137.663736] Key type id_resolver registered
  412. [  137.669371] Key type id_legacy registered
  413. [  137.721888] NFS4: Couldn't follow remote path
  414. [  137.741296] NFS4: Couldn't follow remote path
  415. [  186.699090] bm-dwmac 4070000.ethernet end0: Link is Up - 100Mbps/Full - flow control rx/tx
  416. [  277.829852] bm-dwmac 4070000.ethernet end0: Link is Down
  417. [  303.428230] bm-dwmac 4070000.ethernet end0: Link is Up - 100Mbps/Full - flow control rx/tx
  418. [  314.690014] bm-dwmac 4070000.ethernet end0: Link is Down
  419. [  338.240746] bm-dwmac 4070000.ethernet end0: Link is Up - 100Mbps/Full - flow control rx/tx
  420. [  396.078625] cvitekaadc 300a100.adc: adc_clk_on, I2S3 clk_ctrl0 = 0x180
  421. [  396.086116] cvitekaadc 300a100.adc: adc_hw_params, set rate to 48000
  422. [  396.099380] cvitek-i2s 4100000.i2s: Audio system clk=24576000, sample rate=48000
  423. [  396.110503] cvitekaadc 300a100.adc: adc_on, before rxadc reg val=0x00000000
  424. [  396.120985] cvitekaadc 300a100.adc: adc_on, after rxadc reg val=0x00000003
  425. [  396.175812] cvitekaadc 300a100.adc: ADC get Vol, reg:16,ret:0x10001, idx=0.
  426. [  396.183215] cvitekaadc 300a100.adc: ADC get Vol, reg:16,ret:0x10001, idx=0.
  427. [  396.197422] cvi_i2s_shutdown not start *dai = 00000000d5d1cbfd, *dai->playback_dma_data = 000000004cdf8160
  428. [  396.209812] cvitekaadc 300a100.adc: turn I2S3 aud_en off
  429. [  396.218427] cvitekaadc 300a100.adc: adc_clk_off, I2S3 clk_ctrl0 = 0x80
  430. [  396.243193] cvitekaadc 300a100.adc: turn I2S3 aud_en on
  431. [  396.248709] cvitekaadc 300a100.adc: adc_clk_on, I2S3 clk_ctrl0 = 0x180
  432. [  396.260262] cvitekaadc 300a100.adc: adc_hw_params, set rate to 48000
  433. [  396.271938] cvitek-i2s 4100000.i2s: Audio system clk=24576000, sample rate=48000
  434. [  396.284685] cvitekaadc 300a100.adc: adc_on, before rxadc reg val=0x00000000
  435. [  396.291934] cvitekaadc 300a100.adc: adc_on, after rxadc reg val=0x00000003
  436. [  396.304680] cvi_i2s_shutdown not start *dai = 00000000d5d1cbfd, *dai->playback_dma_data = 000000004cdf8160
  437. [  396.316745] cvitekaadc 300a100.adc: turn I2S3 aud_en off
  438. [  396.325210] cvitekaadc 300a100.adc: adc_clk_off, I2S3 clk_ctrl0 = 0x80
  439. [  396.765476] cvitek-i2s 4130000.i2s: Audio system clk=24576000, sample rate=48000
  440. [  396.791625] cvitekadac 300a000.dac: dac_reg_read reg:40,ret:0x0.
  441. [  396.797913] cvitekadac 300a000.dac: dac_reg_read reg:40,ret:0x0.
  442. [  396.808017] cvitekadac 300a000.dac: dac_reg_read reg:0,ret:0x0.
  443. [  396.820123] cvitekadac 300a000.dac: dac_reg_read reg:0,ret:0x0.
  444. [  396.829428] cvitekadac 300a000.dac: Get DAC Vol reg:16,ret:0x0 temp_lval=0.
  445. [  396.839839] cvitekadac 300a000.dac: dac_reg_read reg:16,ret:0x0.
  446. [  396.849250] cvitekadac 300a000.dac: Get DAC Vol reg:16,ret:0x0 temp_lval=0.
  447. [  396.859277] cvitekadac 300a000.dac: dac_reg_read reg:16,ret:0x0.
  448. [  396.870366] cvi_i2s_shutdown not start *dai = 00000000c4e1e50b, *dai->playback_dma_data = 00000000cf9aa452
  449. [  396.891954] cvitek-i2s 4130000.i2s: Audio system clk=24576000, sample rate=48000
  450. [  396.902687] cvi_i2s_shutdown not start *dai = 00000000c4e1e50b, *dai->playback_dma_data = 00000000cf9aa452
  451. [  397.001730] cvitekaadc 300a100.adc: turn I2S3 aud_en on
  452. [  397.008670] cvitekaadc 300a100.adc: adc_clk_on, I2S3 clk_ctrl0 = 0x180
  453. [  397.028941] cvi_i2s_shutdown not start *dai = 00000000d5d1cbfd, *dai->playback_dma_data = 000000004cdf8160
  454. [  397.046279] cvitekaadc 300a100.adc: turn I2S3 aud_en off
  455. [  397.055838] cvitekaadc 300a100.adc: adc_clk_off, I2S3 clk_ctrl0 = 0x80
  456. [  397.111362] cvi_i2s_shutdown not start *dai = 00000000c4e1e50b, *dai->playback_dma_data = 00000000cf9aa452
  457. [  397.548230] cvitekaadc 300a100.adc: turn I2S3 aud_en on
  458. [  397.553772] cvitekaadc 300a100.adc: adc_clk_on, I2S3 clk_ctrl0 = 0x180
  459. [  397.572422] cvi_i2s_shutdown not start *dai = 00000000d5d1cbfd, *dai->playback_dma_data = 000000004cdf8160
  460. [  397.582554] cvitekaadc 300a100.adc: turn I2S3 aud_en off
  461. [  397.591376] cvitekaadc 300a100.adc: adc_clk_off, I2S3 clk_ctrl0 = 0x80
  462. [  397.622824] cvi_i2s_shutdown not start *dai = 00000000c4e1e50b, *dai->playback_dma_data = 00000000cf9aa452
  463. [  397.653781] cvitekaadc 300a100.adc: turn I2S3 aud_en on
  464. [  397.663516] cvitekaadc 300a100.adc: adc_clk_on, I2S3 clk_ctrl0 = 0x180
  465. [  397.684661] cvi_i2s_shutdown not start *dai = 00000000d5d1cbfd, *dai->playback_dma_data = 000000004cdf8160
  466. [  397.696815] cvitekaadc 300a100.adc: turn I2S3 aud_en off
  467. [  397.702397] cvitekaadc 300a100.adc: adc_clk_off, I2S3 clk_ctrl0 = 0x80
  468. [  397.716189] cvitekaadc 300a100.adc: turn I2S3 aud_en on
  469. [  397.726316] cvitekaadc 300a100.adc: adc_clk_on, I2S3 clk_ctrl0 = 0x180
  470. [  397.739216] cvi_i2s_shutdown not start *dai = 00000000d5d1cbfd, *dai->playback_dma_data = 000000004cdf8160
  471. [  397.749917] cvitekaadc 300a100.adc: turn I2S3 aud_en off
  472. [  397.760041] cvitekaadc 300a100.adc: adc_clk_off, I2S3 clk_ctrl0 = 0x80
  473. [  397.775782] cvi_i2s_shutdown not start *dai = 00000000c4e1e50b, *dai->playback_dma_data = 00000000cf9aa452
  474. [  397.792249] cvi_i2s_shutdown not start *dai = 00000000c4e1e50b, *dai->playback_dma_data = 00000000cf9aa452
  475. [  406.843212] bm-dwmac 4070000.ethernet end0: Link is Down
  476. [  434.490794] bm-dwmac 4070000.ethernet end0: Link is Up - 100Mbps/Full - flow control rx/tx
  477. [  493.879257] bm-dwmac 4070000.ethernet end0: Link is Down
  478. [  510.263862] bm-dwmac 4070000.ethernet end0: Link is Up - 100Mbps/Full - flow control rx/tx
  479. [  523.574078] bm-dwmac 4070000.ethernet end0: Link is Down
  480. [  553.268782] bm-dwmac 4070000.ethernet end0: Link is Up - 100Mbps/Full - flow control rx/tx
  481. [  673.063167] bm-dwmac 4070000.ethernet end0: Link is Down
  482. [  677.514681] usb 1-1: USB disconnect, device number 2
  483. [  682.062191] usb 1-1: new high-speed USB device number 3 using dwc2
  484. [  699.686064] bm-dwmac 4070000.ethernet end0: Link is Up - 100Mbps/Full - flow control rx/tx
  485. [  726.562826] cvi_rtc 5026000.rtc: time set to 1715958987. 5/17/2024 15:16:27
  486. [  726.570091] cvi_rtc 5026000.rtc: time read as 1715958987. 5/17/2024 15:16:27
  487. [  752.929620] bm-dwmac 4070000.ethernet end0: Link is Down
  488. [  756.002055] bm-dwmac 4070000.ethernet end0: Link is Up - 100Mbps/Full - flow control rx/tx
  489. [  765.216490] bm-dwmac 4070000.ethernet end0: Link is Down
  490. [  790.815831] bm-dwmac 4070000.ethernet end0: Link is Up - 100Mbps/Full - flow control rx/tx
  491. [  826.552508] usb 1-1: USB disconnect, device number 3
  492. [  828.700563] bm-dwmac 4070000.ethernet end0: Link is Down
  493. [  838.787695] usb 1-1: new high-speed USB device number 4 using dwc2
  494. [  849.180366] bm-dwmac 4070000.ethernet end0: Link is Up - 100Mbps/Full - flow control rx/tx
  495.  
  496.  
  497.  
  498.  
Tags: milk
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!