Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- *** Warning - bad CRC or NAND, using default environment
- ##### EmbedSky BIOS for SKY2416/TQ2416 #####
- This Board: SDRAM is 64MB; LCD display size is: 800 X 480
- Press Space key to Download Mode.!
- SD:File System init failed!
- Start Linux ...
- NAND read: device 0 offset 0x300000, size 0x400000
- 4194304 bytes read: OK
- Boot with zImage
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- Linux version 3.2.35 (root@cjh-ubuntu) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-176) ) #6 PREEMPT Thu Mar 7 13:48:19 CST 2013
- CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
- CPU: VIVT data cache, VIVT instruction cache
- Machine: SMDK2416
- Memory policy: ECC disabled, Data cache writeback
- CPU S3C2416/S3C2450 (id 0x32450003)
- S3C24XX Clocks, Copyright 2004 Simtec Electronics
- CPU: MPLL on 800.000 MHz, cpu 400.000 MHz, mem 133.333 MHz, pclk 66.666 MHz
- CPU: EPLL on 96.000 MHz, usb-bus 48.000 MHz
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
- Kernel command line: noinitrd ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs init=/linuxrc console=ttySAC0 mem=64M
- PID hash table entries: 256 (order: -2, 1024 bytes)
- Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
- Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
- Memory: 64MB = 64MB total
- Memory: 59024k/59024k available, 6512k reserved, 0K highmem
- Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- vmalloc : 0xc4800000 - 0xf6000000 ( 792 MB)
- lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
- modules : 0xbf000000 - 0xc0000000 ( 16 MB)
- .text : 0xc0008000 - 0xc03e9000 (3972 kB)
- .init : 0xc03e9000 - 0xc0409000 ( 128 kB)
- .data : 0xc040a000 - 0xc05a2680 (1634 kB)
- .bss : 0xc05a26a4 - 0xc05bf97c ( 117 kB)
- SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- NR_IRQS:99
- irq: clearing subpending status 00000002
- Calibrating delay loop... 198.45 BogoMIPS (lpj=496128)
- pid_max: default: 4096 minimum: 301
- Mount-cache hash table entries: 512
- CPU: Testing write buffer coherency: ok
- NET: Registered protocol family 16
- S3C2416: Initializing architecture
- S3C2416: IRQ Support
- S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics
- DMA channel 0 at c4804000, irq 88
- DMA channel 1 at c4804100, irq 89
- DMA channel 2 at c4804200, irq 90
- DMA channel 3 at c4804300, irq 91
- DMA channel 4 at c4804400, irq 92
- DMA channel 5 at c4804500, irq 93
- bio: create slab <bio-0> at 0
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- s3c24xx_i2c_probe
- s3c-i2c s3c2410-i2c: slave address 0x10
- s3c-i2c s3c2410-i2c: bus frequency set to 65 KHz
- s3c-i2c s3c2410-i2c: i2c-0: S3C I2C adapter
- Advanced Linux Sound Architecture Driver Version 1.0.24.
- NET: Registered protocol family 2
- IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
- TCP established hash table entries: 2048 (order: 2, 16384 bytes)
- TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
- TCP: Hash tables configured (established 2048 bind 2048)
- TCP reno registered
- NET: Registered protocol family 1
- RPC: Registered named UNIX socket transport module.
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- RPC: Registered tcp NFSv4.1 backchannel transport module.
- s3c-adc s3c24xx-adc: attached adc driver
- msgmni has been set to 115
- io scheduler noop registered (default)
- io scheduler cfq registered
- s3c-fb s3c-fb: window 0: fb
- s3c-fb s3c-fb: LCD type is TN83 800*480, default_bpp=16, pixclock=5
- s3c-fb s3c-fb: window 1: fb
- s3c-fb s3c-fb: LCD type is TN83 800*480, default_bpp=16, pixclock=5
- s3c2440-uart.0: ttySAC0 at MMIO 0x50000000 (irq = 70) is a S3C2440
- console [ttySAC0] enabled
- s3c2440-uart.1: ttySAC1 at MMIO 0x50004000 (irq = 73) is a S3C2440
- s3c2440-uart.2: ttySAC2 at MMIO 0x50008000 (irq = 76) is a S3C2440
- s3c2440-uart.3: ttySAC3 at MMIO 0x5000c000 (irq = 94) is a S3C2440
- loop: module loaded
- S3C24XX NAND Driver, (c) 2004 Simtec Electronics
- info->cpu_type=3, tacls_max=8
- s3c24xx-nand s3c2416-nand: Tacls=3, 22ns Twrph0=7 52ns, Twrph1=3 22ns
- s3c24xx-nand s3c2416-nand: System booted from NAND
- s3c24xx-nand s3c2416-nand: NAND ECC disabled
- NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit)
- NAND_ECC_NONE selected by board driver. This is not recommended!
- Scanning device for bad blocks
- Bad eraseblock 552 at 0x000004500000
- Creating 4 MTD partitions on "NAND":
- 0x000000000000-0x000000100000 : "Bootloader"
- 0x000000100000-0x000000300000 : "LOGO"
- 0x000000300000-0x000000700000 : "Kernel"
- 0x000000700000-0x000008000000 : "ROOTFS"
- UBI: attaching mtd3 to ubi0
- UBI: physical eraseblock size: 131072 bytes (128 KiB)
- UBI: logical eraseblock size: 126976 bytes
- UBI: smallest flash I/O unit: 2048
- UBI: VID header offset: 2048 (aligned 2048)
- UBI: data offset: 4096
- UBI: max. sequence number: 151
- UBI: attached mtd3 to ubi0
- UBI: MTD device name: "ROOTFS"
- UBI: MTD device size: 121 MiB
- UBI: number of good PEBs: 967
- UBI: number of bad PEBs: 1
- UBI: number of corrupted PEBs: 0
- UBI: max. allowed volumes: 128
- UBI: wear-leveling threshold: 4096
- UBI: number of internal volumes: 1
- UBI: number of user volumes: 1
- UBI: available PEBs: 0
- UBI: total number of reserved PEBs: 967
- UBI: number of PEBs reserved for bad PEB handling: 9
- UBI: max/mean erase counter: 2/1
- UBI: image sequence number: 0
- UBI: background thread "ubi_bgt0d" started, PID 306
- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
- s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
- s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 2 ports detected
- usbcore: registered new interface driver usblp
- usbcore: registered new interface driver uas
- Initializing USB Mass Storage driver...
- usbcore: registered new interface driver usb-storage
- USB Mass Storage support registered.
- g_serial gadget: Gadget Serial v2.4
- g_serial gadget: g_serial ready
- s3c-hsudc s3c-hsudc: bound driver g_serial
- samsung-ts s3c2416-ts: driver attached, registering input device
- input: S3C24XX TouchScreen as /devices/virtual/input/input0
- S3C24XX RTC, (c) 2004,2006 Simtec Electronics
- s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
- s3c-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
- i2c /dev entries driver
- S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
- s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq disabled
- sdhci: Secure Digital Host Controller Interface driver
- sdhci: Copyright(c) Pierre Ossman
- s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133333333 Hz)
- s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133333333 Hz)
- s3c-sdhci s3c-sdhci.1: clock source 2: hsmmc-if (24000000 Hz)
- mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
- S3C24XX_UDA134X SoC Audio driver
- UDA134X SoC Audio Codec
- asoc: uda134x-hifi <-> s3c24xx-iis mapping ok
- ALSA device list:
- #0: S3C24XX_UDA134X
- TCP cubic registered
- NET: Registered protocol family 17
- Registering the dns_resolver key type
- s3c-rtc s3c2410-rtc: setting system clock to 2000-01-08 06:40:31 UTC (947313631)
- UBIFS: recovery needed
- UBIFS: recovery completed
- UBIFS: mounted UBI device 0, volume 0, name "rootfs"
- UBIFS: file system size: 119738368 bytes (116932 KiB, 114 MiB, 943 LEBs)
- UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
- UBIFS: media format: w4/r0 (latest is w4/r0)
- UBIFS: default compressor: lzo
- g_serial gadget: high-speed config #1: Generic Serial config
- UBIFS: reserved for root: 0 bytes (0 KiB)
- VFS: Mounted root (ubifs filesystem) on device 0:10.
- Freeing init memory: 128K
- dso-iobank: install ok
- 0x505
- gpio_major_n = 5, io_minor_n = 5, output 0
- 0x603
- gpio_major_n = 6, io_minor_n = 3, output 0
- 0x70a
- gpio_major_n = 7, io_minor_n = 10, output 0
- 0x408
- gpio_major_n = 4, io_minor_n = 8, output 1
- dso5000b fpga configure init
- fpga0:status: 0x0
- mapped channel 4 to 0
- mapped channel 3 to 1
- FPGA0 CONFIGURE DATA DOWN finish.
- FPGA0 CONFIGURE Ok.
- 0x8090
- 0x1
- fpga bank 11811dso-fpga: install ok
- bkl tq2416-backlight initialized done...
- dso-buzzer s3c2416-beep initialized done...
- --------------------------------------------------------------------------------
- start
- --------------------------------------------------------------------------------
- Please press Enter to activate this console. UBIFS error (pid 410): ubifs_read_node: bad node type (255 but expected 1)
- UBIFS error (pid 410): ubifs_read_node: bad node at LEB 135:15168, LEB mapping status 0
- UBIFS error (pid 410): do_readpage: cannot read page 1072 of inode 900, error -22
- UBIFS error (pid 410): ubifs_read_node: bad node type (255 but expected 1)
- UBIFS error (pid 410): ubifs_read_node: bad node at LEB 135:15168, LEB mapping status 0
- UBIFS error (pid 410): do_readpage: cannot read page 1072 of inode 900, error -22
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement