SHARE
TWEET

SanDiego-Settings June 2018

a guest Jun 28th, 2018 99 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. # generated by Slic3r Prusa Edition 1.40.1-beta+linux64 on 2018-06-28 at 07:35:57
  2.  
  3. [print:San Diego DasFilament PETG 0.3]
  4. avoid_crossing_perimeters = 0
  5. bottom_solid_layers = 3
  6. bridge_acceleration = 0
  7. bridge_angle = 0
  8. bridge_flow_ratio = 1
  9. bridge_speed = 60
  10. brim_width = 5
  11. clip_multipart_objects = 0
  12. compatible_printers =
  13. compatible_printers_condition =
  14. complete_objects = 0
  15. default_acceleration = 0
  16. dont_support_bridges = 1
  17. elefant_foot_compensation = 0
  18. ensure_vertical_shell_thickness = 0
  19. external_fill_pattern = rectilinear
  20. external_perimeter_extrusion_width = 0
  21. external_perimeter_speed = 50%
  22. external_perimeters_first = 0
  23. extra_perimeters = 1
  24. extruder_clearance_height = 20
  25. extruder_clearance_radius = 20
  26. extrusion_width = 0
  27. fill_angle = 45
  28. fill_density = 20%
  29. fill_pattern = 3dhoneycomb
  30. first_layer_acceleration = 0
  31. first_layer_extrusion_width = 200%
  32. first_layer_height = 0.3
  33. first_layer_speed = 15
  34. gap_fill_speed = 20
  35. gcode_comments = 0
  36. infill_acceleration = 0
  37. infill_every_layers = 1
  38. infill_extruder = 1
  39. infill_extrusion_width = 0
  40. infill_first = 0
  41. infill_only_where_needed = 0
  42. infill_overlap = 25%
  43. infill_speed = 80
  44. inherits =
  45. interface_shells = 0
  46. layer_height = 0.2
  47. max_print_speed = 80
  48. max_volumetric_extrusion_rate_slope_negative = 0
  49. max_volumetric_extrusion_rate_slope_positive = 0
  50. max_volumetric_speed = 0
  51. min_skirt_length = 0
  52. notes =
  53. only_retract_when_crossing_perimeters = 1
  54. ooze_prevention = 0
  55. output_filename_format = [input_filename_base].gcode
  56. overhangs = 1
  57. perimeter_acceleration = 0
  58. perimeter_extruder = 1
  59. perimeter_extrusion_width = 0
  60. perimeter_speed = 60
  61. perimeters = 3
  62. post_process =
  63. print_settings_id =
  64. raft_layers = 0
  65. resolution = 0
  66. seam_position = random
  67. skirt_distance = 4
  68. skirt_height = 1
  69. skirts = 1
  70. small_perimeter_speed = 15
  71. solid_infill_below_area = 70
  72. solid_infill_every_layers = 0
  73. solid_infill_extruder = 1
  74. solid_infill_extrusion_width = 0
  75. solid_infill_speed = 20
  76. spiral_vase = 0
  77. standby_temperature_delta = -5
  78. support_material = 0
  79. support_material_angle = 0
  80. support_material_buildplate_only = 0
  81. support_material_contact_distance = 0.2
  82. support_material_enforce_layers = 0
  83. support_material_extruder = 1
  84. support_material_extrusion_width = 0
  85. support_material_interface_contact_loops = 0
  86. support_material_interface_extruder = 1
  87. support_material_interface_layers = 3
  88. support_material_interface_spacing = 0
  89. support_material_interface_speed = 100%
  90. support_material_pattern = honeycomb
  91. support_material_spacing = 2.5
  92. support_material_speed = 60
  93. support_material_synchronize_layers = 0
  94. support_material_threshold = 0
  95. support_material_with_sheath = 1
  96. support_material_xy_spacing = 50%
  97. thin_walls = 1
  98. threads = 4
  99. top_infill_extrusion_width = 0
  100. top_solid_infill_speed = 15
  101. top_solid_layers = 3
  102. travel_speed = 100
  103. wipe_tower = 0
  104. wipe_tower_bridging = 10
  105. wipe_tower_rotation_angle = 0
  106. wipe_tower_width = 60
  107. wipe_tower_x = 180
  108. wipe_tower_y = 140
  109. xy_size_compensation = 0
  110.  
  111. [filament:San Diego DasFilament PETG 0.3]
  112. bed_temperature = 85
  113. bridge_fan_speed = 100
  114. compatible_printers =
  115. compatible_printers_condition =
  116. cooling = 1
  117. disable_fan_first_layers = 3
  118. end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
  119. extrusion_multiplier = 1
  120. fan_always_on = 0
  121. fan_below_layer_time = 60
  122. filament_colour = #FFFC00
  123. filament_cost = 28
  124. filament_density = 1.38
  125. filament_diameter = 1.75
  126. filament_loading_speed = 28
  127. filament_max_volumetric_speed = 0
  128. filament_notes = ""
  129. filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
  130. filament_settings_id = ""
  131. filament_soluble = 0
  132. filament_toolchange_delay = 0
  133. filament_type = PET
  134. filament_unloading_speed = 90
  135. first_layer_bed_temperature = 85
  136. first_layer_temperature = 235
  137. inherits =
  138. max_fan_speed = 100
  139. min_fan_speed = 35
  140. min_print_speed = 10
  141. slowdown_below_layer_time = 5
  142. start_filament_gcode = "; Filament gcode"
  143. temperature = 225
  144.  
  145. [printer:San Diego DasFilament PETG 0.3]
  146. bed_shape = 0x0,200x0,200x200,0x200
  147. before_layer_gcode =
  148. between_objects_gcode =
  149. cooling_tube_length = 5
  150. cooling_tube_retraction = 91.5
  151. default_filament_profile =
  152. default_print_profile =
  153. deretract_speed = 0
  154. end_gcode = M104 S0 ; turn off nozzle temperature\nM140 S0 ; turn off bed\nG28 X0  ; home X axis\nM84     ; disable motors\n
  155. extruder_colour = ""
  156. extruder_offset = 0x0
  157. gcode_flavor = smoothie
  158. inherits =
  159. layer_gcode =
  160. max_layer_height = 0.3
  161. max_print_height = 200
  162. min_layer_height = 0.07
  163. nozzle_diameter = 0.4
  164. octoprint_apikey = XXX
  165. octoprint_cafile =
  166. octoprint_host = octopi.local
  167. parking_pos_retraction = 92
  168. printer_model =
  169. printer_notes =
  170. printer_settings_id =
  171. printer_variant =
  172. printer_vendor =
  173. retract_before_travel = 2
  174. retract_before_wipe = 0%
  175. retract_layer_change = 1
  176. retract_length = 4
  177. retract_length_toolchange = 10
  178. retract_lift = 0
  179. retract_lift_above = 0
  180. retract_lift_below = 0
  181. retract_restart_extra = 0
  182. retract_restart_extra_toolchange = 0
  183. retract_speed = 80
  184. serial_port =
  185. serial_speed = 250000
  186. single_extruder_multi_material = 0
  187. start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
  188. toolchange_gcode =
  189. use_firmware_retraction = 0
  190. use_relative_e_distances = 0
  191. use_volumetric_e = 0
  192. variable_layer_height = 1
  193. wipe = 0
  194. z_offset = 0
  195.  
  196. [presets]
  197. print = San Diego DasFilament PETG 0.3
  198. printer = San Diego DasFilament PETG 0.3
  199. filament = San Diego DasFilament PETG 0.3
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top