Guest User

armbian-hardware-monitor.log

a guest
Jul 1st, 2019
48
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1.  
  2. ### Activated 1 lzo zram swap devices with 1023 MB each
  3.  
  4. ### Activated Armbian ramlog partition with zstd compression
  5.  
  6. Mon 01 Jul 2019 02:10:13 PM UTC | S905 | 5.89 | arm64 | aarch64 | 5.2.0-rc4-aml-s905
  7.  
  8. ### dmesg:
  9.  
  10. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  11. [ 0.000000] Linux version 5.2.0-rc4-aml-s905 (root@vbox) (gcc version 7.4.1 20181213 [linaro-7.4-2019.02 revision 56ec6f6b99cc167ff0c2f8e1a2eed33b1edc85d4] (Linaro GCC 7.4-2019.02)) #5.89 SMP PREEMPT Thu Jun 20 17:48:52 MSK 2019
  12. [ 0.000000] Machine model: Shenzhen Amediatech Technology Co., Ltd X96 Max
  13. [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000a0000000, size 896 MiB
  14. [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  15. [ 0.000000] On node 0 totalpages: 883968
  16. [ 0.000000] DMA32 zone: 13824 pages used for memmap
  17. [ 0.000000] DMA32 zone: 0 pages reserved
  18. [ 0.000000] DMA32 zone: 883968 pages, LIFO batch:63
  19. [ 0.000000] psci: probing for conduit method from DT.
  20. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  21. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  22. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  23. [ 0.000000] psci: SMC Calling Convention v1.1
  24. [ 0.000000] percpu: Embedded 23 pages/cpu s55640 r8192 d30376 u94208
  25. [ 0.000000] pcpu-alloc: s55640 r8192 d30376 u94208 alloc=23*4096
  26. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  27. [ 0.000000] Detected VIPT I-cache on CPU0
  28. [ 0.000000] CPU features: detected: ARM erratum 845719
  29. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 870144
  30. [ 0.000000] Kernel command line: root=LABEL=ROOTFS rootflags=data=writeback rw console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0
  31. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  32. [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  33. [ 0.000000] Memory: 2509340K/3535872K available (13694K kernel code, 1174K rwdata, 4692K rodata, 576K init, 792K bss, 109028K reserved, 917504K cma-reserved)
  34. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  35. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  36. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
  37. [ 0.000000] Tasks RCU enabled.
  38. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  39. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  40. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  41. [ 0.000000] GIC: Using split EOI/Deactivate mode
  42. [ 0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x460 with crng_init=0
  43. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  44. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  45. [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  46. [ 0.000122] Console: colour dummy device 80x25
  47. [ 0.000400] printk: console [tty0] enabled
  48. [ 0.000435] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  49. [ 0.000455] pid_max: default: 32768 minimum: 301
  50. [ 0.000542] LSM: Security Framework initializing
  51. [ 0.000575] SELinux: Initializing.
  52. [ 0.000620] *** VALIDATE SELinux ***
  53. [ 0.000675] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  54. [ 0.000702] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
  55. [ 0.001077] *** VALIDATE proc ***
  56. [ 0.001283] *** VALIDATE cgroup1 ***
  57. [ 0.001295] *** VALIDATE cgroup2 ***
  58. [ 0.023974] ASID allocator initialised with 32768 entries
  59. [ 0.031965] rcu: Hierarchical SRCU implementation.
  60. [ 0.048015] smp: Bringing up secondary CPUs ...
  61. [ 0.080221] Detected VIPT I-cache on CPU1
  62. [ 0.080273] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  63. [ 0.112244] Detected VIPT I-cache on CPU2
  64. [ 0.112272] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  65. [ 0.144287] Detected VIPT I-cache on CPU3
  66. [ 0.144308] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  67. [ 0.144361] smp: Brought up 1 node, 4 CPUs
  68. [ 0.144424] SMP: Total of 4 processors activated.
  69. [ 0.144435] CPU features: detected: 32-bit EL0 Support
  70. [ 0.144446] CPU features: detected: CRC32 instructions
  71. [ 0.144780] CPU: All CPU(s) started at EL2
  72. [ 0.144802] alternatives: patching kernel code
  73. [ 0.145625] devtmpfs: initialized
  74. [ 0.152696] Registered cp15_barrier emulation handler
  75. [ 0.152725] Registered setend emulation handler
  76. [ 0.152944] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  77. [ 0.152968] futex hash table entries: 1024 (order: 4, 65536 bytes)
  78. [ 0.173141] xor: measuring software checksum speed
  79. [ 0.212327] 8regs : 2303.000 MB/sec
  80. [ 0.252355] 32regs : 2831.000 MB/sec
  81. [ 0.292387] arm64_neon: 2461.000 MB/sec
  82. [ 0.292397] xor: using function: 32regs (2831.000 MB/sec)
  83. [ 0.292451] pinctrl core: initialized pinctrl subsystem
  84. [ 0.293423] NET: Registered protocol family 16
  85. [ 0.293833] audit: initializing netlink subsys (disabled)
  86. [ 0.294009] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1
  87. [ 0.294672] cpuidle: using governor menu
  88. [ 0.294964] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  89. [ 0.297119] DMA: preallocated 256 KiB pool for atomic allocations
  90. [ 0.298112] Serial: AMBA PL011 UART driver
  91. [ 0.310746] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  92. [ 0.310773] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  93. [ 0.310786] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  94. [ 0.310798] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  95. [ 0.313074] cryptd: max_cpu_qlen set to 1000
  96. [ 0.318710] raid6: using algorithm neonx8 gen() 0 MB/s
  97. [ 0.318733] raid6: .... xor() 0 MB/s, rmw enabled
  98. [ 0.318744] raid6: using neon recovery algorithm
  99. [ 0.318888] fbcon: Taking over console
  100. [ 0.320067] VDDAO_3V3: supplied by DC_IN
  101. [ 0.320788] SCSI subsystem initialized
  102. [ 0.320962] usbcore: registered new interface driver usbfs
  103. [ 0.321000] usbcore: registered new interface driver hub
  104. [ 0.321059] usbcore: registered new device driver usb
  105. [ 0.321384] pps_core: LinuxPPS API ver. 1 registered
  106. [ 0.321395] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  107. [ 0.321419] PTP clock support registered
  108. [ 0.321532] EDAC MC: Ver: 3.0.0
  109. [ 0.322002] Advanced Linux Sound Architecture Driver Initialized.
  110. [ 0.322399] NetLabel: Initializing
  111. [ 0.322409] NetLabel: domain hash size = 128
  112. [ 0.322418] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  113. [ 0.322474] NetLabel: unlabeled traffic allowed by default
  114. [ 0.322809] clocksource: Switched to clocksource arch_sys_counter
  115. [ 0.322990] VFS: Disk quotas dquot_6.6.0
  116. [ 0.323042] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  117. [ 0.323127] FS-Cache: Loaded
  118. [ 0.323142] *** VALIDATE hugetlbfs ***
  119. [ 0.328330] NET: Registered protocol family 2
  120. [ 0.328760] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
  121. [ 0.328818] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  122. [ 0.329035] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
  123. [ 0.329425] TCP: Hash tables configured (established 32768 bind 32768)
  124. [ 0.329531] UDP hash table entries: 2048 (order: 4, 65536 bytes)
  125. [ 0.329614] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  126. [ 0.329820] NET: Registered protocol family 1
  127. [ 0.330215] RPC: Registered named UNIX socket transport module.
  128. [ 0.330228] RPC: Registered udp transport module.
  129. [ 0.330237] RPC: Registered tcp transport module.
  130. [ 0.330247] RPC: Registered tcp NFSv4.1 backchannel transport module.
  131. [ 0.330261] NET: Registered protocol family 44
  132. [ 0.330431] Trying to unpack rootfs image as initramfs...
  133. [ 0.641993] Freeing initrd memory: 7700K
  134. [ 0.642685] kvm [1]: IPA Size Limit: 40bits
  135. [ 0.643276] kvm [1]: vgic interrupt IRQ1
  136. [ 0.643385] kvm [1]: Hyp mode initialized successfully
  137. [ 1.000528] Initialise system trusted keyrings
  138. [ 1.000715] workingset: timestamp_bits=46 max_order=20 bucket_order=0
  139. [ 1.005211] zbud: loaded
  140. [ 1.006493] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  141. [ 1.006698] FS-Cache: Netfs 'nfs' registered for caching
  142. [ 1.007093] NFS: Registering the id_resolver key type
  143. [ 1.007122] Key type id_resolver registered
  144. [ 1.007131] Key type id_legacy registered
  145. [ 1.007147] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  146. [ 1.007159] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  147. [ 1.007841] FS-Cache: Netfs 'cifs' registered for caching
  148. [ 1.008069] Key type cifs.spnego registered
  149. [ 1.008085] Key type cifs.idmap registered
  150. [ 1.008099] ntfs: driver 2.1.32 [Flags: R/W].
  151. [ 1.008574] JFS: nTxBlock = 8192, nTxLock = 65536
  152. [ 1.012543] SGI XFS with ACLs, security attributes, realtime, no debug enabled
  153. [ 1.013900] ocfs2: Registered cluster interface o2cb
  154. [ 1.014048] OCFS2 User DLM kernel interface loaded
  155. [ 1.015259] gfs2: GFS2 installed
  156. [ 1.030512] Key type asymmetric registered
  157. [ 1.030540] Asymmetric key parser 'x509' registered
  158. [ 1.030612] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
  159. [ 1.030789] io scheduler mq-deadline registered
  160. [ 1.030822] io scheduler kyber registered
  161. [ 1.030980] io scheduler bfq registered
  162. [ 1.042184] soc soc0: Amlogic Meson G12A (S905X2) Revision 28:b (40:2) Detected
  163. [ 1.045366] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  164. [ 1.046573] Serial: AMBA driver
  165. [ 1.046891] ff803000.serial: ttyAML0 at MMIO 0xff803000 (irq = 15, base_baud = 1500000) is a meson_uart
  166. [ 1.872373] printk: console [ttyAML0] enabled
  167. [ 1.877142] ffd24000.serial: ttyAML6 at MMIO 0xffd24000 (irq = 20, base_baud = 1500000) is a meson_uart
  168. [ 1.886080] serial serial0: tty port ttyAML6 registered
  169. [ 1.894313] brd: module loaded
  170. [ 1.897727] loop: module loaded
  171. [ 1.898845] libphy: Fixed MDIO Bus: probed
  172. [ 1.901683] tun: Universal TUN/TAP device driver, 1.6
  173. [ 1.907954] meson8b-dwmac ff3f0000.ethernet: PTP uses main clock
  174. [ 1.912312] meson8b-dwmac ff3f0000.ethernet: no reset control found
  175. [ 1.918977] meson8b-dwmac ff3f0000.ethernet: User ID: 0x11, Synopsys ID: 0x37
  176. [ 1.925582] meson8b-dwmac ff3f0000.ethernet: DWMAC1000
  177. [ 1.930752] meson8b-dwmac ff3f0000.ethernet: DMA HW capability register supported
  178. [ 1.938168] meson8b-dwmac ff3f0000.ethernet: RX Checksum Offload Engine supported
  179. [ 1.945586] meson8b-dwmac ff3f0000.ethernet: COE Type 2
  180. [ 1.950761] meson8b-dwmac ff3f0000.ethernet: TX Checksum insertion supported
  181. [ 1.957747] meson8b-dwmac ff3f0000.ethernet: Wake-Up On Lan supported
  182. [ 1.964153] meson8b-dwmac ff3f0000.ethernet: Normal descriptors
  183. [ 1.969995] meson8b-dwmac ff3f0000.ethernet: Ring mode enabled
  184. [ 1.975773] meson8b-dwmac ff3f0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  185. [ 3.010838] libphy: stmmac: probed
  186. [ 3.011829] VFIO - User Level meta-driver version: 0.3
  187. [ 3.014739] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  188. [ 3.020197] ehci-platform: EHCI generic platform driver
  189. [ 3.025460] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  190. [ 3.031480] ohci-platform: OHCI generic platform driver
  191. [ 3.036999] usbcore: registered new interface driver usb-storage
  192. [ 3.043799] mousedev: PS/2 mouse device common for all mice
  193. [ 3.048552] i2c /dev entries driver
  194. [ 3.052991] sdhci: Secure Digital Host Controller Interface driver
  195. [ 3.057705] sdhci: Copyright(c) Pierre Ossman
  196. [ 3.062088] Synopsys Designware Multimedia Card Interface Driver
  197. [ 3.068881] meson-gx-mmc ffe05000.sd: Got CD GPIO
  198. [ 3.099642] VCC_3V3: supplied by VDDAO_3V3
  199. [ 3.099776] FLASH_1V8: supplied by VCC_3V3
  200. [ 3.102364] meson-gx-mmc ffe07000.mmc: allocated mmc-pwrseq
  201. [ 3.134677] VDDAO_1V8: supplied by VDDAO_3V3
  202. [ 3.135665] sdhci-pltfm: SDHCI platform and OF driver helper
  203. [ 3.139762] ledtrig-cpu: registered to indicate activity on CPUs
  204. [ 3.144752] mmc0: new high speed SDHC card at address 5048
  205. [ 3.145301] meson-sm: secure-monitor enabled
  206. [ 3.151463] mmcblk0: mmc0:5048 SD32G 28.9 GiB
  207. [ 3.154871] hidraw: raw HID events driver (C) Jiri Kosina
  208. [ 3.164236] mmcblk0: p1 p2
  209. [ 3.164661] usbcore: registered new interface driver usbhid
  210. [ 3.172623] usbhid: USB HID core driver
  211. [ 3.176668] platform-mhu ff63c404.mailbox: Platform MHU Mailbox registered
  212. [ 3.185463] NET: Registered protocol family 17
  213. [ 3.187803] Key type dns_resolver registered
  214. [ 3.192400] registered taskstats version 1
  215. [ 3.195869] Loading compiled-in X.509 certificates
  216. [ 3.200706] zswap: loaded using pool lzo/zbud
  217. [ 3.205772] Btrfs loaded, crc32c=crc32c-generic
  218. [ 3.230079] Key type encrypted registered
  219. [ 3.242245] VCC_5V: supplied by DC_IN
  220. [ 3.242458] VCC_1V8: supplied by VCC_3V3
  221. [ 3.265171] mmc1: new high speed MMC card at address 0001
  222. [ 3.266198] mmcblk1: mmc1:0001 SLD32G 28.9 GiB
  223. [ 3.270062] mmcblk1boot0: mmc1:0001 SLD32G partition 1 4.00 MiB
  224. [ 3.282939] meson-drm ff900000.vpu: Queued 3 outputs on vpu
  225. [ 3.283199] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  226. [ 3.290112] mmcblk1boot1: mmc1:0001 SLD32G partition 2 4.00 MiB
  227. [ 3.295390] [drm] No driver support for vblank timestamp query.
  228. [ 3.301192] mmcblk1rpmb: mmc1:0001 SLD32G partition 3 4.00 MiB, chardev (241:0)
  229. [ 3.334861] meson-dw-hdmi ff600000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
  230. [ 3.339354] meson-dw-hdmi ff600000.hdmi-tx: registered DesignWare HDMI I2C bus driver
  231. [ 3.347304] meson-drm ff900000.vpu: bound ff600000.hdmi-tx (ops meson_dw_hdmi_ops)
  232. [ 3.354683] [drm] Initialized meson 1.0.0 20161109 for ff900000.vpu on minor 0
  233. [ 3.437950] random: fast init done
  234. [ 3.467707] [drm] kms: can't enable cloning when we probably wanted to.
  235. [ 3.635590] Console: switching to colour frame buffer device 170x48
  236. [ 3.665488] meson-drm ff900000.vpu: fb0: mesondrmfb frame buffer device
  237. [ 3.672610] dwc3-meson-g12a ffe09000.usb: USB2 ports: 2
  238. [ 3.677226] dwc3-meson-g12a ffe09000.usb: USB3 ports: 1
  239. [ 3.685126] dwc2 ff400000.usb: ff400000.usb supply vusb_d not found, using dummy regulator
  240. [ 3.690655] dwc2 ff400000.usb: ff400000.usb supply vusb_a not found, using dummy regulator
  241. [ 3.698969] dwc2 ff400000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
  242. [ 3.707073] dwc3 ff500000.usb: Failed to get clk 'ref': -2
  243. [ 3.711645] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
  244. [ 3.716655] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 1
  245. [ 3.725274] xhci-hcd xhci-hcd.3.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x0000000000010010
  246. [ 3.733582] xhci-hcd xhci-hcd.3.auto: irq 29, io mem 0xff500000
  247. [ 3.739700] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
  248. [ 3.747604] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  249. [ 3.754758] usb usb1: Product: xHCI Host Controller
  250. [ 3.759590] usb usb1: Manufacturer: Linux 5.2.0-rc4-aml-s905 xhci-hcd
  251. [ 3.765972] usb usb1: SerialNumber: xhci-hcd.3.auto
  252. [ 3.771197] hub 1-0:1.0: USB hub found
  253. [ 3.774520] hub 1-0:1.0: 2 ports detected
  254. [ 3.778737] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
  255. [ 3.783925] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 2
  256. [ 3.791511] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed
  257. [ 3.798093] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  258. [ 3.806151] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02
  259. [ 3.814277] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  260. [ 3.821431] usb usb2: Product: xHCI Host Controller
  261. [ 3.826262] usb usb2: Manufacturer: Linux 5.2.0-rc4-aml-s905 xhci-hcd
  262. [ 3.832644] usb usb2: SerialNumber: xhci-hcd.3.auto
  263. [ 3.837783] hub 2-0:1.0: USB hub found
  264. [ 3.842135] hub 2-0:1.0: 1 port detected
  265. [ 3.849498] hctosys: unable to open rtc device (rtc0)
  266. [ 3.854399] ALSA device list:
  267. [ 3.858714] No soundcards found.
  268. [ 3.863241] Freeing unused kernel memory: 576K
  269. [ 3.886832] Run /init as init process
  270. [ 4.110853] usb 1-1: new low-speed USB device number 2 using xhci-hcd
  271. [ 4.170173] libphy: mdio_mux: probed
  272. [ 4.194155] libphy: mdio_mux: probed
  273. [ 4.265958] usb 1-1: New USB device found, idVendor=89e5, idProduct=1001, bcdDevice= 1.00
  274. [ 4.272587] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  275. [ 4.279587] usb 1-1: Product: USB OPTICAL MOUSE
  276. [ 4.312736] input: USB OPTICAL MOUSE as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.3.auto/usb1/1-1/1-1:1.0/0003:89E5:1001.0001/input/input0
  277. [ 4.325493] hid-generic 0003:89E5:1001.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-xhci-hcd.3.auto-1/input0
  278. [ 4.466839] usb 1-2: new high-speed USB device number 3 using xhci-hcd
  279. [ 4.619031] usb 1-2: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
  280. [ 4.625826] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  281. [ 4.632901] usb 1-2: Product: USB 2.0 Hub
  282. [ 4.694300] hub 1-2:1.0: USB hub found
  283. [ 4.698568] hub 1-2:1.0: 4 ports detected
  284. [ 5.114843] usb 1-2.2: new low-speed USB device number 4 using xhci-hcd
  285. [ 5.343907] usb 1-2.2: New USB device found, idVendor=1a2c, idProduct=2c27, bcdDevice= 1.10
  286. [ 5.351026] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  287. [ 5.358261] usb 1-2.2: Product: USB Keyboard
  288. [ 5.362600] usb 1-2.2: Manufacturer: USB
  289. [ 5.472639] input: USB USB Keyboard as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.3.auto/usb1/1-2/1-2.2/1-2.2:1.0/0003:1A2C:2C27.0002/input/input1
  290. [ 5.543322] hid-generic 0003:1A2C:2C27.0002: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keyboard] on usb-xhci-hcd.3.auto-2.2/input0
  291. [ 5.566302] input: USB USB Keyboard Consumer Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.3.auto/usb1/1-2/1-2.2/1-2.2:1.1/0003:1A2C:2C27.0003/input/input2
  292. [ 5.643124] input: USB USB Keyboard System Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.3.auto/usb1/1-2/1-2.2/1-2.2:1.1/0003:1A2C:2C27.0003/input/input3
  293. [ 5.663835] hid-generic 0003:1A2C:2C27.0003: input,hidraw2: USB HID v1.10 Device [USB USB Keyboard] on usb-xhci-hcd.3.auto-2.2/input1
  294. [ 5.862843] usb 1-2.4: new high-speed USB device number 5 using xhci-hcd
  295. [ 5.890579] EXT4-fs (mmcblk0p2): mounted filesystem with writeback data mode. Opts: data=writeback
  296. [ 6.084649] usb 1-2.4: New USB device found, idVendor=13fe, idProduct=4200, bcdDevice= 1.00
  297. [ 6.093293] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  298. [ 6.100851] usb 1-2.4: Product: USB DISK 2.0
  299. [ 6.106767] usb 1-2.4: Manufacturer:
  300. [ 6.112623] usb 1-2.4: SerialNumber: 070867AA22549885
  301. [ 6.120571] usb-storage 1-2.4:1.0: USB Mass Storage device detected
  302. [ 6.127596] scsi host0: usb-storage 1-2.4:1.0
  303. [ 6.592753] systemd[1]: System time before build time, advancing clock.
  304. [ 6.697810] NET: Registered protocol family 10
  305. [ 6.764006] Segment Routing with IPv6
  306. [ 6.807069] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  307. [ 6.835018] systemd[1]: Detected architecture arm64.
  308. [ 6.869359] systemd[1]: Set hostname to <aml>.
  309. [ 6.877672] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
  310. [ 7.140714] scsi 0:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 6
  311. [ 7.153285] sd 0:0:0:0: [sda] 15130624 512-byte logical blocks: (7.75 GB/7.21 GiB)
  312. [ 7.163480] sd 0:0:0:0: [sda] Write Protect is off
  313. [ 7.169602] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
  314. [ 7.171160] sd 0:0:0:0: [sda] No Caching mode page found
  315. [ 7.177146] sd 0:0:0:0: [sda] Assuming drive cache: write through
  316. [ 7.195003] sda: sda1
  317. [ 7.208008] sd 0:0:0:0: [sda] Attached SCSI removable disk
  318. [ 7.364617] random: systemd: uninitialized urandom read (16 bytes read)
  319. [ 7.379351] random: systemd: uninitialized urandom read (16 bytes read)
  320. [ 7.386758] systemd[1]: Listening on fsck to fsckd communication Socket.
  321. [ 7.399947] random: systemd: uninitialized urandom read (16 bytes read)
  322. [ 7.409268] systemd[1]: Created slice system-getty.slice.
  323. [ 7.421736] systemd[1]: Created slice system-systemd\x2dfsck.slice.
  324. [ 7.433357] systemd[1]: Reached target System Time Synchronized.
  325. [ 7.444248] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  326. [ 7.456759] systemd[1]: Listening on Journal Audit Socket.
  327. [ 7.557174] EXT4-fs (mmcblk0p2): re-mounted. Opts: commit=600,errors=remount-ro
  328. [ 7.905465] systemd-journald[440]: Received request to flush runtime journal from PID 1
  329. [ 8.150269] usb 1-2.4: USB disconnect, device number 5
  330. [ 8.326223] media: Linux media interface: v0.10
  331. [ 8.352997] videodev: Linux video capture interface: v2.00
  332. [ 8.360792] Registered IR keymap rc-x96max
  333. [ 8.371367] IR NEC protocol handler initialized
  334. [ 8.379153] Registered IR keymap rc-cec
  335. [ 8.379320] rc rc1: dw_hdmi as /devices/platform/soc/ff600000.bus/ff600000.hdmi-tx/rc/rc1
  336. [ 8.379460] input: dw_hdmi as /devices/platform/soc/ff600000.bus/ff600000.hdmi-tx/rc/rc1/input5
  337. [ 8.387290] Registered IR keymap rc-cec
  338. [ 8.387439] rc rc2: meson_g12a_ao_cec as /devices/platform/soc/ff800000.bus/ff800280.cec/rc/rc2
  339. [ 8.387580] input: meson_g12a_ao_cec as /devices/platform/soc/ff800000.bus/ff800280.cec/rc/rc2/input6
  340. [ 8.396109] meson-gx-mmc ffe03000.sd: allocated mmc-pwrseq
  341. [ 8.400242] rc rc0: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0
  342. [ 8.400427] input: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0/input4
  343. [ 8.400695] rc rc0: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no transmitter
  344. [ 8.407666] meson-ir ff808000.ir: receiver initialized
  345. [ 8.414622] axg-sound-card sound: snd-soc-dummy-dai <-> ff6421c0.audio-controller mapping ok
  346. [ 8.416710] axg-sound-card sound: snd-soc-dummy-dai <-> ff642200.audio-controller mapping ok
  347. [ 8.417790] axg-sound-card sound: snd-soc-dummy-dai <-> ff642240.audio-controller mapping ok
  348. [ 8.421281] axg-sound-card sound: I2S IN A <-> TDM Pad mapping ok
  349. [ 8.421322] axg-sound-card sound: snd-soc-dummy-dai <-> TDM Loopback mapping ok
  350. [ 8.421366] axg-sound-card sound: I2S IN B <-> TDM Pad mapping ok
  351. [ 8.421404] axg-sound-card sound: snd-soc-dummy-dai <-> TDM Loopback mapping ok
  352. [ 8.421444] axg-sound-card sound: multicodec <-> ff642480.audio-controller mapping ok
  353. [ 8.421481] axg-sound-card sound: SPDIF IN B <-> ff642680.audio-controller mapping ok
  354. [ 8.421694] axg-sound-card sound: ASoC: no sink widget found for TDM_C Playback
  355. [ 8.421700] axg-sound-card sound: ASoC: Failed to add route TDMOUT_C OUT -> direct -> TDM_C Playback
  356. [ 8.472191] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
  357. [ 8.474340] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  358. [ 8.476539] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  359. [ 8.480397] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
  360. [ 8.485079] mmc2: queuing unknown CIS tuple 0x81 (9 bytes)
  361. [ 8.558406] mmc2: new ultra high speed SDR50 SDIO card at address 0001
  362. [ 8.597527] Bluetooth: Core ver 2.22
  363. [ 8.597534] Bluetooth: Starting self testing
  364. [ 8.647175] Bluetooth: ECDH test passed in 48459 usecs
  365. [ 8.652303] Bluetooth: SMP test passed in 3583 usecs
  366. [ 8.652342] Bluetooth: Finished self testing
  367. [ 8.652426] NET: Registered protocol family 31
  368. [ 8.652429] Bluetooth: HCI device and connection manager initialized
  369. [ 8.652444] Bluetooth: HCI socket layer initialized
  370. [ 8.652451] Bluetooth: L2CAP socket layer initialized
  371. [ 8.652465] Bluetooth: SCO socket layer initialized
  372. [ 8.703999] Bluetooth: HCI UART driver ver 2.3
  373. [ 8.704009] Bluetooth: HCI UART protocol H4 registered
  374. [ 8.704012] Bluetooth: HCI UART protocol BCSP registered
  375. [ 8.704067] Bluetooth: HCI UART protocol LL registered
  376. [ 8.704071] Bluetooth: HCI UART protocol ATH3K registered
  377. [ 8.704102] Bluetooth: HCI UART protocol Three-wire (H5) registered
  378. [ 8.704352] Bluetooth: HCI UART protocol Intel registered
  379. [ 8.704546] Bluetooth: HCI UART protocol Broadcom registered
  380. [ 8.704582] Bluetooth: HCI UART protocol QCA registered
  381. [ 8.704585] Bluetooth: HCI UART protocol AG6XX registered
  382. [ 8.704588] Bluetooth: HCI UART protocol Marvell registered
  383. [ 8.704681] hci_uart_bcm serial0-0: serial0-0 supply vbat not found, using dummy regulator
  384. [ 8.704756] hci_uart_bcm serial0-0: serial0-0 supply vddio not found, using dummy regulator
  385. [ 8.969407] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  386. [ 8.995679] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  387. [ 8.999507] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  388. [ 8.999519] cfg80211: failed to load regulatory.db
  389. [ 9.063862] brcmfmac: F1 signature read @0x18000000=0x15264345
  390. [ 9.066643] ------------[ cut here ]------------
  391. [ 9.066651] max_seg_cnt=3, host_max_seg=3 nents=35
  392. [ 9.066768] WARNING: CPU: 3 PID: 292 at drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c:787 brcmf_sdiod_sgtable_alloc+0x144/0x150 [brcmfmac]
  393. [ 9.066771] Modules linked in: btsdio(+) brcmfmac brcmutil cfg80211 hci_uart btqca btbcm btintel bluetooth crct10dif_ce ecdh_generic ecc rfkill snd_soc_meson_axg_sound_card meson_vdec pwm_meson videobuf2_dma_contig ao_cec_g12a v4l2_mem2mem dw_hdmi_cec videobuf2_memops ir_nec_decoder videobuf2_v4l2 videobuf2_common meson_ir snd_soc_meson_axg_spdifout videodev snd_soc_meson_axg_frddr snd_soc_meson_axg_tdmout snd_soc_meson_axg_fifo snd_soc_spdif_tx media snd_soc_meson_axg_tdm_interface snd_soc_meson_axg_tdm_formatter ip_tables x_tables ipv6 crc_ccitt mdio_mux_meson_g12a
  394. [ 9.066831] CPU: 3 PID: 292 Comm: kworker/3:2 Not tainted 5.2.0-rc4-aml-s905 #5.89
  395. [ 9.066834] Hardware name: Shenzhen Amediatech Technology Co., Ltd X96 Max (DT)
  396. [ 9.066869] Workqueue: events brcmf_driver_register [brcmfmac]
  397. [ 9.066876] pstate: 60000005 (nZCv daif -PAN -UAO)
  398. [ 9.066902] pc : brcmf_sdiod_sgtable_alloc+0x144/0x150 [brcmfmac]
  399. [ 9.066929] lr : brcmf_sdiod_sgtable_alloc+0x144/0x150 [brcmfmac]
  400. [ 9.066931] sp : ffff0000101fbab0
  401. [ 9.066934] x29: ffff0000101fbab0 x28: 0000000000000000
  402. [ 9.066938] x27: 0000000000000000 x26: ffff00000a0cc018
  403. [ 9.066943] x25: ffff00000a0d5000 x24: ffff800097344c00
  404. [ 9.066947] x23: ffff000012331000 x22: ffff80009a750000
  405. [ 9.066952] x21: ffff00000a0cc000 x20: 0000000000000023
  406. [ 9.066956] x19: ffff80009a750000 x18: ffffffffffffffff
  407. [ 9.066961] x17: 0000000000000000 x16: 0000000000000000
  408. [ 9.066965] x15: ffff000012331888 x14: ffff0000124403f0
  409. [ 9.066969] x13: ffff000012440036 x12: ffff00001234c000
  410. [ 9.066974] x11: 0000000005f5e0ff x10: 0000000000000000
  411. [ 9.066978] x9 : ffff0000101fbab0 x8 : 656e20333d676573
  412. [ 9.066983] x7 : 5f78616d5f74736f x6 : ffff00001243f6c6
  413. [ 9.066987] x5 : 0000000000000000 x4 : 0000000000000000
  414. [ 9.066991] x3 : 00000000ffffffff x2 : 000080008d5df000
  415. [ 9.066996] x1 : 3f41d0c69dcb5700 x0 : 0000000000000000
  416. [ 9.067001] Call trace:
  417. [ 9.067028] brcmf_sdiod_sgtable_alloc+0x144/0x150 [brcmfmac]
  418. [ 9.067055] brcmf_sdio_probe+0x2a8/0x920 [brcmfmac]
  419. [ 9.067082] brcmf_ops_sdio_probe+0x2c4/0x368 [brcmfmac]
  420. [ 9.067092] sdio_bus_probe+0x90/0x180
  421. [ 9.067099] really_probe+0xdc/0x3d0
  422. [ 9.067105] driver_probe_device+0x12c/0x148
  423. [ 9.067110] device_driver_attach+0x6c/0x90
  424. [ 9.067115] __driver_attach+0xb0/0x160
  425. [ 9.067119] bus_for_each_dev+0x74/0xc8
  426. [ 9.067124] driver_attach+0x20/0x28
  427. [ 9.067129] bus_add_driver+0x154/0x238
  428. [ 9.067134] driver_register+0x60/0x110
  429. [ 9.067140] sdio_register_driver+0x24/0x30
  430. [ 9.067166] brcmf_sdio_register+0x14/0x40 [brcmfmac]
  431. [ 9.067192] brcmf_driver_register+0xc/0x18 [brcmfmac]
  432. [ 9.067199] process_one_work+0x1e0/0x338
  433. [ 9.067203] worker_thread+0x40/0x460
  434. [ 9.067211] kthread+0x124/0x128
  435. [ 9.067217] ret_from_fork+0x10/0x1c
  436. [ 9.067221] ---[ end trace b64c2018e7b4a3a8 ]---
  437. [ 9.074034] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
  438. [ 9.075154] usbcore: registered new interface driver brcmfmac
  439. [ 9.128348] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.amediatech,x96-max.txt failed with error -2
  440. [ 9.136922] random: crng init done
  441. [ 9.136932] random: 7 urandom warning(s) missed due to ratelimiting
  442. [ 9.890370] RTL8211F Gigabit Ethernet 0.0:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=0.0:00, irq=POLL)
  443. [ 9.902887] meson8b-dwmac ff3f0000.ethernet eth0: No Safety Features support found
  444. [ 9.902903] meson8b-dwmac ff3f0000.ethernet eth0: PTP not supported by HW
  445. [ 9.913092] zram: Added device: zram0
  446. [ 9.913615] zram: Added device: zram1
  447. [ 9.916244] zram: Added device: zram2
  448. [ 9.957650] zram1: detected capacity change from 0 to 1073741824
  449. [ 10.002091] Adding 1048572k swap on /dev/zram1. Priority:5 extents:1 across:1048572k SSFS
  450. [ 10.159156] zram0: detected capacity change from 0 to 52428800
  451. [ 10.287158] EXT4-fs (zram0): mounted filesystem without journal. Opts: discard
  452. [ 10.754848] Bluetooth: hci0: command 0xfc18 tx timeout
  453. [ 11.330949] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
  454. [ 11.418946] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
  455.  
  456. ### armbian-release:
  457.  
  458. # PLEASE DO NOT EDIT THIS FILE
  459. BOARD=aml-s905
  460. BOARD_NAME="S905"
  461. BOARDFAMILY=aml-s905
  462. BUILD_REPOSITORY_URL=https://github.com/150balbes/Build-Armbian.git
  463. BUILD_REPOSITORY_COMMIT=0d4d065-dirty
  464. VERSION=5.89
  465. LINUXFAMILY=aml-s905
  466. BRANCH=dev
  467. ARCH=arm64
  468. IMAGE_TYPE=user-built
  469. BOARD_TYPE=conf
  470. INITRD_ARCH=arm64
  471. KERNEL_IMAGE_TYPE=Image
  472.  
  473. ### boot environment:
  474.  
  475. rootdev=UUID=e4f3cef1-6360-464a-a70d-21cfd96b763c
  476. rootfstype=BOOT_IMAGE=/boot/vmlinuz-5.0.0-17-generic
  477. rootdev=LABEL=ROOTFS
  478. rootfstype=ext4
  479. usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u
  480.  
  481.  
  482. ### lsusb:
  483.  
  484. Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
  485. Bus 001 Device 004: ID 1a2c:2c27 China Resource Semico Co., Ltd
  486. Bus 001 Device 003: ID 1a40:0101 Terminus Technology Inc. Hub
  487. Bus 001 Device 002: ID 89e5:1001
  488. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  489.  
  490. ### lscpu:
  491.  
  492. Architecture: aarch64
  493. Byte Order: Little Endian
  494. CPU(s): 4
  495. On-line CPU(s) list: 0-3
  496. Thread(s) per core: 1
  497. Core(s) per socket: 4
  498. Socket(s): 1
  499. Vendor ID: ARM
  500. Model: 4
  501. Model name: Cortex-A53
  502. Stepping: r0p4
  503. BogoMIPS: 48.00
  504. L1d cache: unknown size
  505. L1i cache: unknown size
  506. L2 cache: unknown size
  507. Flags: fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
  508.  
  509. ### cpuinfo:
  510.  
  511. processor : 0
  512. model name : ARMv8 Processor rev 4 (v8l)
  513. BogoMIPS : 48.00
  514. Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
  515. CPU implementer : 0x41
  516. CPU architecture: 8
  517. CPU variant : 0x0
  518. CPU part : 0xd03
  519. CPU revision : 4
  520.  
  521. processor : 1
  522. model name : ARMv8 Processor rev 4 (v8l)
  523. BogoMIPS : 48.00
  524. Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
  525. CPU implementer : 0x41
  526. CPU architecture: 8
  527. CPU variant : 0x0
  528. CPU part : 0xd03
  529. CPU revision : 4
  530.  
  531. processor : 2
  532. model name : ARMv8 Processor rev 4 (v8l)
  533. BogoMIPS : 48.00
  534. Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
  535. CPU implementer : 0x41
  536. CPU architecture: 8
  537. CPU variant : 0x0
  538. CPU part : 0xd03
  539. CPU revision : 4
  540.  
  541. processor : 3
  542. model name : ARMv8 Processor rev 4 (v8l)
  543. BogoMIPS : 48.00
  544. Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
  545. CPU implementer : 0x41
  546. CPU architecture: 8
  547. CPU variant : 0x0
  548. CPU part : 0xd03
  549. CPU revision : 4
  550.  
  551.  
  552. ### meminfo:
  553.  
  554. MemTotal: 3435120 kB
  555. MemFree: 3252544 kB
  556. MemAvailable: 3255148 kB
  557. Buffers: 8948 kB
  558. Cached: 55788 kB
  559. SwapCached: 0 kB
  560. Active: 49548 kB
  561. Inactive: 37584 kB
  562. Active(anon): 22900 kB
  563. Inactive(anon): 7300 kB
  564. Active(file): 26648 kB
  565. Inactive(file): 30284 kB
  566. Unevictable: 0 kB
  567. Mlocked: 0 kB
  568. SwapTotal: 1048572 kB
  569. SwapFree: 1048572 kB
  570. Dirty: 144 kB
  571. Writeback: 0 kB
  572. AnonPages: 20556 kB
  573. Mapped: 18960 kB
  574. Shmem: 7696 kB
  575. KReclaimable: 15248 kB
  576. Slab: 45248 kB
  577. SReclaimable: 15248 kB
  578. SUnreclaim: 30000 kB
  579. KernelStack: 2800 kB
  580. PageTables: 2172 kB
  581. NFS_Unstable: 0 kB
  582. Bounce: 0 kB
  583. WritebackTmp: 0 kB
  584. CommitLimit: 2766132 kB
  585. Committed_AS: 100796 kB
  586. VmallocTotal: 135290159040 kB
  587. VmallocUsed: 0 kB
  588. VmallocChunk: 0 kB
  589. Percpu: 896 kB
  590. HardwareCorrupted: 0 kB
  591. AnonHugePages: 63488 kB
  592. ShmemHugePages: 0 kB
  593. ShmemPmdMapped: 0 kB
  594. CmaTotal: 917504 kB
  595. CmaFree: 909404 kB
  596. HugePages_Total: 0
  597. HugePages_Free: 0
  598. HugePages_Rsvd: 0
  599. HugePages_Surp: 0
  600. Hugepagesize: 2048 kB
  601. Hugetlb: 0 kB
  602.  
  603. ### virtual memory:
  604.  
  605. vm.admin_reserve_kbytes = 8192
  606. vm.block_dump = 0
  607. vm.compact_unevictable_allowed = 1
  608. vm.dirty_background_bytes = 0
  609. vm.dirty_background_ratio = 10
  610. vm.dirty_bytes = 0
  611. vm.dirty_expire_centisecs = 3000
  612. vm.dirty_ratio = 20
  613. vm.dirtytime_expire_seconds = 43200
  614. vm.dirty_writeback_centisecs = 500
  615. vm.drop_caches = 0
  616. vm.extfrag_threshold = 500
  617. vm.hugetlb_shm_group = 0
  618. vm.laptop_mode = 0
  619. vm.legacy_va_layout = 0
  620. vm.lowmem_reserve_ratio = 256 32 0
  621. vm.max_map_count = 65530
  622. vm.memory_failure_early_kill = 0
  623. vm.memory_failure_recovery = 1
  624. vm.min_free_kbytes = 22528
  625. vm.mmap_min_addr = 4096
  626. vm.mmap_rnd_bits = 18
  627. vm.mmap_rnd_compat_bits = 11
  628. vm.nr_hugepages = 0
  629. vm.nr_overcommit_hugepages = 0
  630. vm.oom_dump_tasks = 1
  631. vm.oom_kill_allocating_task = 0
  632. vm.overcommit_kbytes = 0
  633. vm.overcommit_memory = 0
  634. vm.overcommit_ratio = 50
  635. vm.page-cluster = 0
  636. vm.panic_on_oom = 0
  637. vm.percpu_pagelist_fraction = 0
  638. vm.stat_interval = 1
  639. vm.swappiness = 100
  640. vm.user_reserve_kbytes = 106936
  641. vm.vfs_cache_pressure = 100
  642. vm.watermark_boost_factor = 15000
  643. vm.watermark_scale_factor = 10
  644.  
  645. ### ip addr:
  646.  
  647. 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
  648. link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
  649. inet 127.0.0.1/8 scope host lo
  650. valid_lft forever preferred_lft forever
  651. inet6 ::1/128 scope host
  652. valid_lft forever preferred_lft forever
  653. 2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
  654. link/ether c4:2a:fe:06:54:62 brd ff:ff:ff:ff:ff:ff
  655. 3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
  656. link/ether cc:4b:73:76:2b:dc brd ff:ff:ff:ff:ff:ff
  657.  
  658. ### partitions:
  659.  
  660. major minor #blocks name
  661.  
  662. 179 0 30289920 mmcblk0
  663. 179 1 131072 mmcblk0p1
  664. 179 2 29851840 mmcblk0p2
  665. 179 32 30310400 mmcblk1
  666. 253 0 51200 zram0
  667. 253 1 1048576 zram1
  668.  
  669. ### df:
  670.  
  671. udev 1.2G 0 1.2G 0% /dev
  672. tmpfs 336M 7.6M 328M 3% /run
  673. /dev/mmcblk0p2 28G 2.5G 25G 9% /
  674. tmpfs 1.7G 0 1.7G 0% /dev/shm
  675. tmpfs 5.0M 4.0K 5.0M 1% /run/lock
  676. tmpfs 1.7G 0 1.7G 0% /sys/fs/cgroup
  677. tmpfs 1.7G 4.0K 1.7G 1% /tmp
  678. /dev/mmcblk0p1 128M 71M 58M 55% /boot
  679. /dev/zram0 49M 572K 45M 2% /var/log
  680.  
  681. ### lsblk:
  682.  
  683. NAME FSTYPE SIZE MOUNTPOINT UUID
  684. mmcblk0 28.9G
  685. ├─mmcblk0p1 vfat 128M /boot 0D49-2AF6
  686. └─mmcblk0p2 ext4 28.5G / 3eca0385-9bd1-4886-bbc6-7f8b09b5fa0f
  687. mmcblk1 28.9G
  688. mmcblk1boot0 4M
  689. mmcblk1boot1 4M
  690. zram0 50M /var/log
  691.  
  692. ### zramctl:
  693.  
  694. NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT
  695. /dev/zram1 lzo 1G 4K 81B 12K 4 [SWAP]
  696. /dev/zram0 zstd 50M 476K 94.3K 424K 4 /var/log
  697.  
  698. ### mtab:
  699.  
  700. /dev/mmcblk0p1 /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro 0 0
  701. /dev/mmcblk0p2 / ext4 rw,noatime,nodiratime,errors=remount-ro,commit=600 0 0
  702. /dev/mmcblk0p2 /var/log.hdd ext4 rw,noatime,nodiratime,errors=remount-ro,commit=600 0 0
  703. /dev/zram0 /var/log ext4 rw,relatime,discard 0 0
  704.  
  705. ### mmc0:5048 info:
  706.  
  707. fwrev: 0x0
  708. uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=SD32G MODALIAS=mmc:block
  709. cid: 275048534433324760da2679ea013100
  710. rca: 0x5048
  711. csd: 400e00325b590000e7177f800a400000
  712. manfid: 0x000027
  713. ocr: 0x00200000
  714. preferred_erase_size: 4194304
  715. type: SD
  716. hwrev: 0x6
  717. date: 01/2019
  718. dsr: 0x404
  719. erase_size: 512
  720. oemid: 0x5048
  721. serial: 0xda2679ea
  722. ssr: 00000000050000000403900200331900000000000000000001000000000000000000000000000000000000000000000000000000000000000000000000000000
  723. scr: 0205808301000000
  724. name: SD32G
  725.  
  726. ### mmc1:0001 info:
  727.  
  728. fwrev: 0x1e01000000000000
  729. uevent: DRIVER=mmcblk MMC_TYPE=MMC MMC_NAME=SLD32G MODALIAS=mmc:block
  730. cid: 880103534c44333247208e933d568500
  731. rel_sectors: 0x1
  732. rca: 0x0001
  733. pre_eol_info: 0x01
  734. csd: d0ffff329f5903ffffffffe796400000
  735. manfid: 0x000088
  736. ocr: 0x00200000
  737. preferred_erase_size: 4194304
  738. enhanced_area_offset: 18446744073709551594
  739. raw_rpmb_size_mult: 0x20
  740. type: MMC
  741. hwrev: 0x0
  742. date: 08/2018
  743. prv: 0x20
  744. ffu_capable: 1
  745. dsr: 0x404
  746. erase_size: 524288
  747. life_time: 0x01 0x01
  748. enhanced_area_size: 4294967274
  749. oemid: 0x0103
  750. serial: 0x8e933d56
  751. cmdq_en: 0
  752. rev: 0x8
  753. name: SLD32G
  754.  
  755. ### Boot system health:
  756.  
  757. Time CPU n/a load %cpu %sys %usr %nice %io %irq
  758. 14:10:16: --- 0.47 44% 21% 13% 0% 7% 2%
  759. 14:10:16: --- 0.47 81% 14% 45% 0% 18% 2%
  760. 14:10:16: --- 0.83 60% 10% 22% 0% 25% 0%
  761. 14:10:17: --- 0.83 33% 5% 6% 0% 20% 0%
  762. 14:10:17: --- 0.83 29% 3% 0% 0% 24% 0%
RAW Paste Data