Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- === START OF INFORMATION SECTION ===
- Device Model: SPCC SSD110
- Serial Number: 0000600078
- LU WWN Device Id: 0 000000 000000000
- Firmware Version: 332ABBF0
- User Capacity: 60,022,480,896 bytes [60.0 GB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: Solid State Device
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Sat May 19 09:49:50 2018 UTC
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 2097) seconds.
- Offline data collection
- capabilities: (0x7f) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Abort Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 48) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x0021) SCT Status supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 120 120 050 Pre-fail Always - 0
- 5 Reallocated_Sector_Ct 0x0033 100 100 003 Pre-fail Always - 0
- 9 Power_On_Hours 0x0032 087 087 000 Old_age Always - 11871 (19 218 0)
- 12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3508
- 171 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0
- 172 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0
- 174 Unknown_Attribute 0x0030 000 000 000 Old_age Offline - 249
- 177 Wear_Leveling_Count 0x0000 000 000 000 Old_age Offline - 5
- 181 Program_Fail_Cnt_Total 0x0032 000 000 000 Old_age Always - 0
- 182 Erase_Fail_Count_Total 0x0032 000 000 000 Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
- 194 Temperature_Celsius 0x0022 128 030 000 Old_age Always - 128 (0 30 0 30 0)
- 195 Hardware_ECC_Recovered 0x001c 100 100 000 Old_age Offline - 0
- 196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0
- 201 Unknown_SSD_Attribute 0x001c 100 100 000 Old_age Offline - 0
- 204 Soft_ECC_Correction 0x001c 100 100 000 Old_age Offline - 0
- 230 Unknown_SSD_Attribute 0x0013 100 100 000 Pre-fail Always - 100
- 231 Temperature_Celsius 0x0013 095 095 010 Pre-fail Always - 0
- 233 Media_Wearout_Indicator 0x0000 000 000 000 Old_age Offline - 15489
- 234 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 15970
- 241 Total_LBAs_Written 0x0032 000 000 000 Old_age Always - 15970
- 242 Total_LBAs_Read 0x0032 000 000 000 Old_age Always - 25920
- SMART Error Log not supported
- SMART Self-test Log not supported
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment