root@PF:/home/administrator# apt-get install packetfence
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
  adwaita-icon-theme dconf-gsettings-backend dconf-service dmeventd fonts-droid glib-networking glib-networking-common glib-networking-services
  gsettings-desktop-schemas hicolor-icon-theme libasan1 libasound2 libasound2-data libatk-bridge2.0-0 libatk1.0-0 libatk1.0-data libatomic1 libatspi2.0-0
  libcairo-gobject2 libcanberra-gtk3-0 libcanberra0 libcilkrts5 libcloog-isl4 libcolord2 libcolorhug2 libconfuse-common libconfuse0 libcroco3 libcupsfilters1
  libcupsimage2 libdconf1 libexif12 libftdi1 libgd3 libgphoto2-6 libgphoto2-port10 libgtk-3-0 libgtk-3-bin libgtk-3-common libgudev-1.0-0 libgusb2 libieee1284-3
  libijs-0.35 libisl10 libitm1 libjson-glib-1.0-0 libjson-glib-1.0-common liblsan0 liblvm2cmd2.02 libnl-route-3-200 libnuma1 libpaper1 libpolkit-agent-1-0
  libpolkit-backend-1-0 libpolkit-gobject-1-0 libproxy1 libquadmath0 librest-0.7-0 librsvg2-2 librsvg2-common libsane libsane-common libsoup-gnome2.4-1 libsoup2.4-1
  libtokyocabinet9 libtsan0 libubsan0 libv4l-0 libv4lconvert0 libvorbisfile3 libvpx1 libwayland-client0 libwayland-cursor0 libxaw7 libxcomposite1 libxcursor1
  libxdamage1 libxfixes3 libxinerama1 libxkbcommon0 libxmu6 libxpm4 libxrandr2 libxt6
Use 'apt-get autoremove' to remove them.
The following NEW packages will be installed:
  packetfence
0 upgraded, 1 newly installed, 0 to remove and 2 not upgraded.
485 not fully installed or removed.
Need to get 0 B/40.1 MB of archives.
After this operation, 91.0 MB of additional disk space will be used.
Setting up fingerbank (3.1.1-1) ...
DBIx::Class::Schema::Versioned::upgrade(): Upgrade not necessary at db/upgrade.pl line 59
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  376M  100  376M    0     0  2853k      0  0:02:15  0:02:15 --:--:-- 3957k
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  382M  100  382M    0     0  2574k      0  0:02:32  0:02:32 --:--:-- 2549k
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 11487  100 11487    0     0   9898      0  0:00:01  0:00:01 --:--:--  9902
Selecting previously unselected package packetfence.
(Reading database ... 69472 files and directories currently installed.)
Preparing to unpack .../packetfence_7.2.0-1_all.deb ...
pf user already exist
Created symlink from /etc/systemd/system/mariadb.service to /dev/null.
Restarting journald to enable persistent logging
Unpacking packetfence (7.2.0-1) ...
Setting up libgssrpc4:amd64 (1.12.1+dfsg-19+deb8u2) ...
Setting up libkadm5clnt-mit9:amd64 (1.12.1+dfsg-19+deb8u2) ...
Setting up libkdb5-7:amd64 (1.12.1+dfsg-19+deb8u2) ...
Setting up libkadm5srv-mit9:amd64 (1.12.1+dfsg-19+deb8u2) ...
Setting up libtokyocabinet9:amd64 (1.4.48-3) ...
Setting up fonts-dejavu-core (2.34-1) ...
Setting up fonts-liberation (1.07.4-1) ...
Setting up fontconfig-config (2.11.0-6.3+deb8u1) ...
Setting up libfontconfig1:amd64 (2.11.0-6.3+deb8u1) ...
Setting up fontconfig (2.11.0-6.3+deb8u1) ...
Regenerating fonts cache... done.
Setting up fonts-droid (1:4.4.4r2-6) ...
Setting up gawk (1:4.1.1+dfsg-1) ...
Setting up liblua5.3-0:amd64 (5.3.1-1) ...
Setting up haproxy (1.7.3-1) ...
Setting up imagemagick-common (8:6.8.9.9-5+deb8u9) ...
Setting up libapache2-mod-proxy-html (1:2.4.10-10+deb8u9) ...
Setting up libasan1:amd64 (4.9.2-10) ...
Setting up libasound2-data (1.0.28-1) ...
Setting up libasound2:amd64 (1.0.28-1) ...
Setting up libasyncns0:amd64 (0.8-5) ...
Setting up libatasmart4:amd64 (0.19-3) ...
Setting up libproxy1:amd64 (0.4.11-4+b2) ...
Setting up glib-networking-common (2.42.0-2) ...
Setting up libglib2.0-0:amd64 (2.42.1-1+b1) ...
Setting up glib-networking-services (2.42.0-2) ...
Setting up libdconf1:amd64 (0.22.0-1) ...
Setting up dconf-service (0.22.0-1) ...
Setting up dconf-gsettings-backend:amd64 (0.22.0-1) ...
Setting up gsettings-desktop-schemas (3.14.1-1) ...
Setting up glib-networking:amd64 (2.42.0-2) ...
Setting up libatk1.0-data (2.14.0-1) ...
Setting up libatk1.0-0:amd64 (2.14.0-1) ...
Setting up libatspi2.0-0:amd64 (2.14.0-1) ...
Setting up libatk-bridge2.0-0:amd64 (2.14.0-2) ...
Setting up libatomic1:amd64 (4.9.2-10) ...
Setting up libbluetooth3:amd64 (5.23-2+b1) ...
Setting up libpixman-1-0:amd64 (0.32.6-3) ...
Setting up libxcb-render0:amd64 (1.10-3+b1) ...
Setting up libxcb-shm0:amd64 (1.10-3+b1) ...
Setting up libxrender1:amd64 (1:0.9.8-1+b1) ...
Setting up libcairo2:amd64 (1.14.0-2.1+deb8u2) ...
Setting up libcairo-gobject2:amd64 (1.14.0-2.1+deb8u2) ...
Setting up libogg0:amd64 (1.3.2-1) ...
Setting up libvorbis0a:amd64 (1.3.4-2) ...
Setting up libvorbisfile3:amd64 (1.3.4-2) ...
Setting up libcanberra0:amd64 (0.30-2.1) ...
Setting up libcroco3:amd64 (0.6.8-3+b1) ...
Setting up libthai-data (0.1.21-1) ...
Setting up libdatrie1:amd64 (0.2.8-1) ...
Setting up libthai0:amd64 (0.1.21-1) ...
Setting up libpango-1.0-0:amd64 (1.36.8-3) ...
Setting up libgraphite2-3:amd64 (1.3.10-1~deb8u1) ...
Setting up libharfbuzz0b:amd64 (0.9.35-2) ...
Setting up libpangoft2-1.0-0:amd64 (1.36.8-3) ...
Setting up libpangocairo-1.0-0:amd64 (1.36.8-3) ...
Setting up libjpeg62-turbo:amd64 (1:1.3.1-12) ...
Setting up libjasper1:amd64 (1.900.1-debian1-2.4+deb8u3) ...
Setting up libjbig0:amd64 (2.1-3.1) ...
Setting up libtiff5:amd64 (4.0.3-12.3+deb8u4) ...
Setting up libgdk-pixbuf2.0-common (2.31.1-2+deb8u5) ...
Setting up libgdk-pixbuf2.0-0:amd64 (2.31.1-2+deb8u5) ...
Setting up librsvg2-2:amd64 (2.40.5-1+deb8u2) ...
Setting up librsvg2-common:amd64 (2.40.5-1+deb8u2) ...
Setting up hicolor-icon-theme (0.13-1) ...
Setting up libwayland-client0:amd64 (1.6.0-2) ...
Setting up libwayland-cursor0:amd64 (1.6.0-2) ...
Setting up libxcomposite1:amd64 (1:0.4.4-1) ...
Setting up libxfixes3:amd64 (1:5.0.1-2+b2) ...
Setting up libxcursor1:amd64 (1:1.1.14-1+b1) ...
Setting up libxdamage1:amd64 (1:1.1.4-2+b1) ...
Setting up libxi6:amd64 (2:1.7.4-1+b2) ...
Setting up libxinerama1:amd64 (2:1.1.3-1+b1) ...
Setting up libxkbcommon0:amd64 (0.4.3-2) ...
Setting up libxrandr2:amd64 (2:1.4.2-1+b1) ...
Setting up liblcms2-2:amd64 (2.6-3+deb8u1) ...
Setting up libcolord2:amd64 (1.2.1-1+b2) ...
Setting up libjson-glib-1.0-common (1.0.2-1) ...
Setting up libjson-glib-1.0-0:amd64 (1.0.2-1) ...
Setting up libsoup2.4-1:amd64 (2.48.0-1) ...
Setting up libsoup-gnome2.4-1:amd64 (2.48.0-1) ...
Setting up librest-0.7-0:amd64 (0.7.92-3) ...
Setting up shared-mime-info (1.3-1) ...
Setting up libcap-ng0:amd64 (0.7.4-2) ...
Setting up libcilkrts5:amd64 (4.9.2-10) ...
Setting up libisl10:amd64 (0.12.2-2) ...
Setting up libcloog-isl4:amd64 (0.18.2-1+b2) ...
Setting up libgudev-1.0-0:amd64 (215-17+deb8u7) ...
Setting up libgusb2:amd64 (0.1.6-5) ...
Setting up libcolorhug2:amd64 (1.2.1-1+b2) ...
Setting up libconfuse-common (2.7-5) ...
Setting up libconfuse0:amd64 (2.7-5) ...
Setting up libcurl3-gnutls:amd64 (7.38.0-4+deb8u5) ...
Setting up libdevmapper-event1.02.1:amd64 (2:1.02.90-2.2+deb8u1) ...
Setting up libexif12:amd64 (0.6.21-2) ...
Setting up libgomp1:amd64 (4.9.2-10) ...
Setting up libfftw3-double3:amd64 (3.3.4-2) ...
Setting up libflac8:amd64 (1.3.0-3) ...
Setting up libftdi1:amd64 (0.20-2) ...
Setting up libvpx1:amd64 (1.3.0-3) ...
Setting up libxpm4:amd64 (1:3.5.12-0+deb8u1) ...
Setting up libgd3:amd64 (2.1.0-5+deb8u9) ...
Setting up libgeoip1:amd64 (1.6.2-4) ...
Setting up libgphoto2-port10:amd64 (2.5.4-1.1+b2) ...
Setting up libgphoto2-6:amd64 (2.5.4-1.1+b2) ...
Setting up libgps21:amd64 (3.11-3) ...
Setting up libhiredis0.10:amd64 (0.11.0-4) ...
Setting up x11-common (1:7.7+7) ...
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults
Setting up libice6:amd64 (2:1.0.9-1+b1) ...
Setting up libieee1284-3:amd64 (0.2.11-12) ...
Setting up libijs-0.35:amd64 (0.35-10) ...
Setting up libitm1:amd64 (4.9.2-10) ...
Setting up liblqr-1-0:amd64 (0.4.2-2) ...
Setting up liblsan0:amd64 (4.9.2-10) ...
Setting up liblvm2app2.2:amd64 (2.02.111-2.2+deb8u1) ...
Setting up libmagickcore-6.q16-2:amd64 (8:6.8.9.9-5+deb8u9) ...
Setting up libmemcached11:amd64 (1.0.18-4) ...
Setting up libnet1:amd64 (1.1.6+dfsg-3) ...
Setting up libnl-3-200:amd64 (3.2.24-2) ...
Setting up libnl-genl-3-200:amd64 (3.2.24-2) ...
Setting up libnl-route-3-200:amd64 (3.2.24-2) ...
Setting up libnotify4:amd64 (0.7.6-2) ...
Setting up libnspr4:amd64 (2:4.12-1+debu8u1) ...
Setting up libnss3:amd64 (2:3.26-1+debu8u2) ...
Setting up libnuma1:amd64 (2.0.10-1) ...
Setting up liboping0:amd64 (1.7.0-1) ...
Setting up libossp-uuid16:amd64 (1.6.2-1.5+b1) ...
Setting up dbus (1.8.22-0+deb8u1) ...
Setting up libpam-systemd:amd64 (215-17+deb8u7) ...
Setting up libpaper1:amd64 (1.1.24+nmu4) ...

Creating config file /etc/papersize with new version
Setting up libpcsclite1:amd64 (1.8.13-1+deb8u1) ...
Setting up libpolkit-gobject-1-0:amd64 (0.105-15~deb8u2) ...
Setting up libpolkit-agent-1-0:amd64 (0.105-15~deb8u2) ...
Setting up libpolkit-backend-1-0:amd64 (0.105-15~deb8u2) ...
Setting up libpq5:amd64 (9.4.12-0+deb8u1) ...
Setting up libsm6:amd64 (2:1.2.2-1+b1) ...
Setting up libvorbisenc2:amd64 (1.3.4-2) ...
Setting up libsndfile1:amd64 (1.0.25-9.1+deb8u1) ...
Setting up libx11-xcb1:amd64 (2:1.6.2-3) ...
Setting up libxtst6:amd64 (2:1.2.2-1+b1) ...
Setting up libpulse0:amd64 (5.0-13) ...
Setting up libquadmath0:amd64 (4.9.2-10) ...
Setting up librabbitmq1:amd64 (0.5.2-2) ...
Setting up libreadline5:amd64 (5.2+dfsg-2) ...
Setting up libsane-common (1.0.24-8+deb8u2) ...
Setting up libv4lconvert0:amd64 (1.6.0-2) ...
Setting up libv4l-0:amd64 (1.6.0-2) ...
Setting up libsane:amd64 (1.0.24-8+deb8u2) ...
Adding scanner group...
Setting up libsctp1:amd64 (1.0.16+dfsg-2) ...
Setting up libsensors4:amd64 (1:3.3.5-2) ...
Setting up libsnmp-base (5.7.2.1+dfsg-1) ...
Setting up libsnmp30:amd64 (5.7.2.1+dfsg-1) ...
Setting up libtsan0:amd64 (4.9.2-10) ...
Setting up libubsan0:amd64 (4.9.2-10) ...
Setting up libupsclient4:amd64 (2.7.2-4) ...
Setting up libvarnishapi1 (4.0.2-1) ...
Setting up libxt6:amd64 (1:1.1.4-1+b1) ...
Setting up libxmu6:amd64 (2:1.1.2-1) ...
Setting up libxaw7:amd64 (2:1.0.12-2+b1) ...
Setting up libxslt1.1:amd64 (1.1.28-2+deb8u3) ...
Setting up libyajl2:amd64 (2.1.0-2) ...
Setting up libyaml-syck-perl (1.27-2+b2) ...
Setting up galera-3 (25.3.20-1) ...
Setting up iproute (1:3.16.0-2) ...
Setting up libperl4-corelibs-perl (0.003-1) ...
Setting up lsof (4.86+dfsg-1) ...
Setting up rsync (3.1.1-3) ...
Setting up socat (1.7.2.4-2) ...
Setting up java-common (0.52) ...
Setting up tzdata-java (2017b-0+deb8u1) ...
Setting up openssl-blacklist (0.5-3) ...
Setting up openssl-blacklist-extra (0.5-3) ...
Setting up libc-ares2:amd64 (1.10.0-2+deb8u1) ...
Setting up libipset3:amd64 (6.23-2) ...
Setting up libnetfilter-conntrack3:amd64 (1.0.4-1) ...
Setting up libisc95 (1:9.9.5.dfsg-9+deb8u12) ...
Setting up libdns100 (1:9.9.5.dfsg-9+deb8u12) ...
Setting up libisccc90 (1:9.9.5.dfsg-9+deb8u12) ...
Setting up libisccfg90 (1:9.9.5.dfsg-9+deb8u12) ...
Setting up libbind9-90 (1:9.9.5.dfsg-9+deb8u12) ...
Setting up liblwres90 (1:9.9.5.dfsg-9+deb8u12) ...
Setting up bind9-host (1:9.9.5.dfsg-9+deb8u12) ...
Setting up libswitch-perl (2.17-2) ...
Setting up patch (2.7.5-1) ...
Setting up apache2-mpm-prefork (2.4.10-10+deb8u9) ...
Setting up arping (2.14-1) ...
Setting up collectd-core (5.6.2-2) ...
Setting up libdbi1:amd64 (0.9.0-4) ...
Setting up librrd4 (1.4.8-1.2) ...
Setting up collectd (5.6.2-2) ...
Setting up libcollectdclient1 (5.6.2-2) ...
Setting up collectd-utils (5.6.2-2) ...
Setting up conntrack (1:1.4.2-2+deb8u1) ...
Setting up freeradius-common (3.0.15.6) ...
Setting up make (4.0-8.1) ...
Setting up freeradius-config (3.0.15.6) ...
Installing new version of config file /etc/freeradius/clients.conf ...
Installing new version of config file /etc/freeradius/dictionary ...
Installing new version of config file /etc/freeradius/experimental.conf ...
Installing new version of config file /etc/freeradius/proxy.conf ...
Installing new version of config file /etc/freeradius/radiusd.conf ...
Installing new version of config file /etc/freeradius/sites-available/buffered-sql ...
Installing new version of config file /etc/freeradius/sites-available/coa ...
Installing new version of config file /etc/freeradius/sites-available/control-socket ...
Installing new version of config file /etc/freeradius/sites-available/copy-acct-to-home-server ...
Installing new version of config file /etc/freeradius/sites-available/decoupled-accounting ...
Installing new version of config file /etc/freeradius/sites-available/default ...
Installing new version of config file /etc/freeradius/sites-available/dhcp ...
Installing new version of config file /etc/freeradius/sites-available/dhcp.relay ...
Installing new version of config file /etc/freeradius/sites-available/dynamic-clients ...
Installing new version of config file /etc/freeradius/sites-available/example ...
Installing new version of config file /etc/freeradius/sites-available/inner-tunnel ...
Installing new version of config file /etc/freeradius/sites-available/originate-coa ...
Installing new version of config file /etc/freeradius/sites-available/proxy-inner-tunnel ...
Installing new version of config file /etc/freeradius/sites-available/robust-proxy-accounting ...
Installing new version of config file /etc/freeradius/sites-available/soh ...
Installing new version of config file /etc/freeradius/sites-available/status ...
Installing new version of config file /etc/freeradius/sites-available/virtual.example.com ...
Installing new version of config file /etc/freeradius/sites-available/vmps ...
Installing new version of config file /etc/freeradius/templates.conf ...
make: Entering directory '/etc/freeradius/certs'
openssl req -new  -out server.csr -keyout server.key -config ./server.cnf
Generating a 2048 bit RSA private key
..............+++
...........................................+++
writing new private key to 'server.key'
-----
chmod g+r server.key
openssl req -new -x509 -keyout ca.key -out ca.pem \
        -days '60' -config ./ca.cnf
Generating a 2048 bit RSA private key
.......................+++
.........................................................+++
writing new private key to 'ca.key'
-----
chmod g+r ca.key
openssl ca -batch -keyfile ca.key -cert ca.pem -in server.csr  -key 'whatever' -out server.crt -extensions xpserver_ext -extfile xpextensions -config ./server.cnf
Using configuration from ./server.cnf
Check that the request matches the signature
Signature ok
Certificate Details:
        Serial Number: 1 (0x1)
        Validity
            Not Before: Jul 11 21:40:20 2017 GMT
            Not After : Sep  9 21:40:20 2017 GMT
        Subject:
            countryName               = FR
            stateOrProvinceName       = Radius
            organizationName          = Example Inc.
            commonName                = Example Server Certificate
            emailAddress              = admin@example.org
        X509v3 extensions:
            X509v3 Extended Key Usage:
                TLS Web Server Authentication
            X509v3 CRL Distribution Points:

                Full Name:
                  URI:http://www.example.com/example_ca.crl

Certificate is to be certified until Sep  9 21:40:20 2017 GMT (60 days)

Write out database with 1 new entries
Data Base Updated
openssl pkcs12 -export -in server.crt -inkey server.key -out server.p12  -passin pass:'whatever' -passout pass:'whatever'
chmod g+r server.p12
openssl pkcs12 -in server.p12 -out server.pem -passin pass:'whatever' -passout pass:'whatever'
MAC verified OK
chmod g+r server.pem
server.pem: OK
openssl x509 -inform PEM -outform DER -in ca.pem -out ca.der
openssl req -new  -out client.csr -keyout client.key -config ./client.cnf
Generating a 2048 bit RSA private key
.............+++
....+++
writing new private key to 'client.key'
-----
chmod g+r client.key
openssl ca -batch -keyfile ca.key -cert ca.pem -in client.csr  -key 'whatever' -out client.crt -extensions xpclient_ext -extfile xpextensions -config ./client.cnf
Using configuration from ./client.cnf
Check that the request matches the signature
Signature ok
Certificate Details:
        Serial Number: 2 (0x2)
        Validity
            Not Before: Jul 11 21:40:20 2017 GMT
            Not After : Sep  9 21:40:20 2017 GMT
        Subject:
            countryName               = FR
            stateOrProvinceName       = Radius
            organizationName          = Example Inc.
            commonName                = user@example.org
            emailAddress              = user@example.org
        X509v3 extensions:
            X509v3 Extended Key Usage:
                TLS Web Client Authentication
            X509v3 CRL Distribution Points:

                Full Name:
                  URI:http://www.example.com/example_ca.crl

Certificate is to be certified until Sep  9 21:40:20 2017 GMT (60 days)

Write out database with 1 new entries
Data Base Updated
openssl pkcs12 -export -in client.crt -inkey client.key -out client.p12  -passin pass:'whatever' -passout pass:'whatever'
chmod g+r client.p12
openssl pkcs12 -in client.p12 -out client.pem -passin pass:'whatever' -passout pass:'whatever'
MAC verified OK
chmod g+r client.pem
cp client.pem 'user@example.org'.pem
make: Leaving directory '/etc/freeradius/certs'
Setting up libfreeradius3 (3.0.15.6) ...
Setting up freeradius (3.0.15.6) ...
Installing new version of config file /etc/default/freeradius ...
Installing new version of config file /etc/init.d/freeradius ...
Installing new version of config file /etc/logrotate.d/freeradius ...
Setting up freeradius-ldap (3.0.15.6) ...
Setting up freeradius-redis (3.0.15.6) ...
Setting up freeradius-rest (3.0.15.6) ...
Setting up golang-1.7-src (1.7.4-1~bpo8+2) ...
Setting up golang-1.7-go (1.7.4-1~bpo8+2) ...
Setting up python-twisted-bin (14.0.2-3) ...
Setting up python-pkg-resources (5.5.1-1) ...
Setting up python-zope.interface (4.1.1-3.1) ...
Setting up python-ply (3.4-5) ...
Setting up python-pycparser (2.10+dfsg-3) ...
Setting up python-cffi (0.8.6-1) ...
Setting up python-six (1.8.0-1) ...
Setting up python-cryptography (0.6.1-1+deb8u1) ...
Setting up python-openssl (0.14-1) ...
Setting up python-pyasn1 (0.1.7-1) ...
Setting up python-pyasn1-modules (0.0.5-0.1) ...
Setting up python-characteristic (0.1.0-1) ...
Setting up python-service-identity (1.0.0-3) ...
Setting up python-twisted-core (14.0.2-3) ...
Setting up python-whisper (0.9.12-1) ...
Setting up graphite-carbon (0.9.15-1) ...
Setting up krb5-config (2.3) ...
Setting up krb5-user (1.12.1+dfsg-19+deb8u2) ...
Setting up libalgorithm-combinatorics-perl (0.27-1+b1) ...
Setting up libalgorithm-diff-perl (1.19.02-3) ...
Setting up libdevel-symdump-perl (2.12-1) ...
Setting up libapache2-mod-perl2 (2.0.9~1624218-2+deb8u1) ...
apache2_invoke: Enable module perl
Setting up libapache-dbi-perl (1.12-1) ...
Setting up libapache-htpasswd-perl (1.8-1.1) ...
Setting up libapache-session-perl (1.93-1) ...
Setting up libapache-ssllookup-perl (2.00-04-1) ...
Setting up libapreq2-3 (2.13-4+b1) ...
Setting up libapache2-mod-apreq2 (2.13-4+b1) ...
apache2_invoke: Enable module apreq2
Setting up libapache2-mod-systemd (0.1-1) ...
apache2_invoke: Enable module systemd
Setting up libapache2-mod-wsgi (4.3.0-1) ...
apache2_invoke: Enable module wsgi
Setting up libapache2-request-perl (2.13-4+b1) ...
Setting up libdigest-sha1-perl (2.13-1) ...
Setting up libio-lockedfile-perl (0.23+d030220-3) ...
Setting up libauthen-htpasswd-perl (0.171-1) ...
Setting up libauthen-krb5-simple-perl (0.43-2+b2) ...
Setting up libb-keywords-perl (1.13-1) ...
Setting up libbit-vector-perl (7.3-1+b2) ...
Setting up libcrypt-random-seed-perl (0.03-1) ...
Setting up libmath-random-isaac-perl (1.003-1) ...
Setting up libbytes-random-secure-perl (0.28-1) ...
Setting up libcarp-perl (1.25-1) ...
Setting up libstring-escape-perl (2010.002-1) ...
Setting up libossp-uuid-perl (1.6.2-1.5+b1) ...
Setting up libcatalyst-authentication-credential-http-perl (1.016-2) ...
Setting up libcatalyst-authentication-store-htpasswd-perl (1.003-1) ...
Setting up libtext-csv-perl (1.32-1) ...
Setting up libcatalyst-view-csv-perl (1.5-1) ...
Setting up libcgi-session-driver-chi-perl (1.0.3-1) ...
Setting up libcgi-session-perl (4.48-1+deb8u1) ...
Setting up libcgi-session-serialize-yaml-perl (4.26-1) ...
Setting up libdata-serializer-perl (0.60-1) ...
Setting up libdigest-jhash-perl (0.08-1+b1) ...
Setting up libhash-moreutils-perl (0.05-1) ...
Setting up libmoox-types-mooselike-numeric-perl (1.02-1) ...
Setting up libexporter-lite-perl (0.06-1) ...
Setting up libtime-duration-perl (1.10-1) ...
Setting up libtime-duration-parse-perl (0.11-1) ...
Setting up libchi-perl (0.59-1) ...
Setting up libtime-out-perl (0.11-1) ...
Setting up libperlio-via-timeout-perl (0.29-1) ...
Setting up libio-socket-timeout-perl (0.27-1) ...
Setting up libredis-perl (2:1.9760-1) ...
Setting up libchi-driver-redis-perl (0.09-1) ...
Setting up libchi-memoize-perl (0.07-1) ...
Setting up libclass-gomor-perl (1.02-1) ...
Setting up libclass-mix-perl (0.005-1) ...
Setting up libclass-tiny-perl (1.000-1) ...
Setting up libclone-pp-perl (1.06-1) ...
Setting up libconfig-tiny-perl (2.20-1) ...
Setting up libconst-fast-perl (0.014-1) ...
Setting up libconvert-asn1-perl (0.27-1) ...
Setting up libconvert-binhex-perl (1.123-2) ...
Setting up libconvert-nls-date-format-perl (0.05-1) ...
Setting up libcrypt-rijndael-perl (1.12-1+b1) ...
Setting up libcrypt-cbc-perl (2.33-1) ...
Setting up libcrypt-eksblowfish-perl (0.009-1+b2) ...
Setting up libcrypt-generatepassword-perl (0.04-1) ...
Setting up libcrypt-openssl-bignum-perl (0.04-4+b2) ...
Setting up libcrypt-openssl-pkcs10-perl (0.14-1) ...
Setting up libcrypt-openssl-pkcs12-perl (0.7-1) ...
Setting up libcrypt-openssl-rsa-perl (0.28-2+b1) ...
Setting up libcrypt-openssl-x509-perl (1.8.4-1+b1) ...
Setting up libcrypt-smime-perl (0.15-1+b1) ...
Setting up libcrypt-ssleay-perl (0.58-1+b2) ...
Setting up libdata-clone-perl (0.004-1+b1) ...
Setting up libdata-messagepack-perl (0.48-1+b1) ...
Setting up libdata-messagepack-stream-perl (0.07-1) ...
Setting up libsereal-decoder-perl (3.003-1) ...
Setting up libsereal-encoder-perl (3.003-1) ...
Setting up libdata-serializer-sereal-perl (1.05-1) ...
Setting up libdata-swap-perl (0.07-2+b1) ...
Setting up libdatetime-format-dateparse-perl (0.05-1) ...
Setting up libdatetime-format-mysql-perl (0.04-3) ...
Setting up libdatetime-format-oracle-perl (0.06-1) ...
Setting up libdatetime-format-pg-perl (0.16010-1) ...
Setting up libdatetime-format-rfc3339-perl (1.0.5-1) ...
Setting up libdevel-hide-perl (0.0009-1) ...
Setting up libdigest-md4-perl (1.9+dfsg-1+b2) ...
Setting up libexporter-tiny-perl (0.038-2) ...
Setting up libfile-fcntllock-perl (0.22-1+b1) ...
Setting up libfile-which-perl (1.09-1) ...
Setting up libfile-homedir-perl (1.00-1) ...
Setting up libfile-remove-perl (1.52-1) ...
Setting up libpath-tiny-perl (0.058-1) ...
Setting up libpath-isdev-perl (1.001002-1) ...
Setting up libpath-finddev-perl (0.5.2-1) ...
Setting up libfile-sharedir-projectdistdir-perl (1.000004-1) ...
Setting up libfile-slurp-tiny-perl (0.003-1) ...
Setting up libfile-tail-perl (0.99.3-5) ...
Setting up libfile-tempdir-perl (0.02-1) ...
Setting up libheap-perl (0.80-2) ...
Setting up libgraph-perl (1:0.96-1.1) ...
Setting up libguard-perl (1.022-2+b1) ...
Setting up libmoosex-types-common-perl (0.001012-1) ...
Setting up libhtml-formhandler-perl (1:0.40019-1) ...
Setting up libimage-magick-q16-perl (8:6.8.9.9-5+deb8u9) ...
Setting up libimage-magick-perl (8:6.8.9.9-5+deb8u9) ...
Setting up libio-interactive-perl (0.0.6-1) ...
Setting up libio-interface-perl (1.07-2+b1) ...
Setting up libio-prompt-tiny-perl (0.002-1) ...
Setting up libio-pty-perl (1:1.08-1+b4) ...
Setting up libio-sessiondata-perl (1.03-1) ...
Setting up libio-string-perl (1.08-3) ...
Setting up libipc-run-perl (0.92-1) ...
Setting up libipc-run3-perl (0.048-1) ...
Setting up libiptables-parse-perl (1.1-1+deb8u1) ...
Setting up libnetaddr-ip-perl (4.075+dfsg-1+b1) ...
Setting up libiptables-chainmgr-perl (1.2-1) ...
Setting up libjs-jquery (1.7.2+dfsg-3.2) ...
Setting up libjs-jquery-flot (0.8.2+dfsg-1) ...
Setting up libjs-prototype (1.7.1-3) ...
Setting up libjs-scriptaculous (1.9.0-2) ...
Setting up libxmlsec1 (1.2.20-2+b1) ...
Setting up libxmlsec1-openssl (1.2.20-2+b1) ...
Setting up liblasso3 (2.4.1-1) ...
Setting up liblasso-perl (2.4.1-1) ...
Setting up liblinux-fd-perl (0.009-1) ...
Setting up liblinux-inotify2-perl (1:1.22-1+b1) ...
Setting up libload-perl (0.23-1) ...
Setting up liblog-any-adapter-perl (0.11-1) ...
Setting up liblog-any-adapter-log4perl-perl (0.06-1) ...
Setting up liblog-dispatch-perl (2.44-1) ...
Setting up liblog-dispatch-config-perl (1.04-1) ...
Setting up liblog-dispatch-configurator-any-perl (1.122640-1) ...
Setting up liblwp-useragent-determined-perl (1.07-1) ...
Setting up libmime-lite-perl (3.030-2) ...
Setting up libmime-tools-perl (5.505-1) ...
Setting up libmodule-scandeps-perl (1.16-1) ...
Setting up libmodule-install-perl (1.14-1) ...
Setting up libnet-telnet-perl (3.04-1) ...
Setting up libnet-cli-interact-perl (2.142720-1) ...
Setting up libterm-readpassword-perl (0.11-2) ...
Setting up libtext-glob-perl (0.09-1) ...
Setting up libnet-appliance-session-perl (4.142720-1) ...
Setting up libnet-arp-perl (1.0.8-2) ...
Setting up libnet-cisco-mse-rest-perl (0.2-1) ...
Setting up libnetwork-ipv4addr-perl (0.10.ds-2) ...
Setting up libnet-ipv6addr-perl (0.2.dfsg.1-3) ...
Setting up libnet-frame-perl (1.11-1) ...
Setting up libnet-interface-perl (1.012-1) ...
Setting up libnet-ldap-perl (1:0.6400+dfsg-2) ...
Setting up libnet-nessus-rest-perl (0.2-1) ...
Setting up libxml-namespacesupport-perl (1.11-1) ...
Setting up libxml-sax-base-perl (1.07-1) ...
Setting up libxml-sax-perl (0.99+dfsg-2) ...
update-perl-sax-parsers: Registering Perl SAX parser XML::SAX::PurePerl with priority 10...
update-perl-sax-parsers: Updating overall Perl SAX parser modules info file...

Creating config file /etc/perl/XML/SAX/ParserDetails.ini with new version
Setting up libxml-libxml-perl (2.0116+dfsg-1+deb8u1) ...
update-perl-sax-parsers: Registering Perl SAX parser XML::LibXML::SAX::Parser with priority 50...
update-perl-sax-parsers: Registering Perl SAX parser XML::LibXML::SAX with priority 50...
update-perl-sax-parsers: Updating overall Perl SAX parser modules info file...
Replacing config file /etc/perl/XML/SAX/ParserDetails.ini with new version
Setting up libxml-parser-perl (2.41-3) ...
Setting up libxml-sax-expat-perl (0.40-2) ...
update-perl-sax-parsers: Registering Perl SAX parser XML::SAX::Expat with priority 50...
update-perl-sax-parsers: Updating overall Perl SAX parser modules info file...
Replacing config file /etc/perl/XML/SAX/ParserDetails.ini with new version
Setting up libxml-simple-perl (2.20-1) ...
Setting up libnet-nessus-xmlrpc-perl (0.40-1) ...
Setting up libnet-netmask-perl (1.9021-1) ...
Setting up libnet-oauth2-perl (0.57-1) ...
Setting up libnet-pcap-perl (0.17-1+b2) ...
Setting up libnet-route-perl (0.2-1) ...
Setting up libnet-snmp-perl (6.0.1-2) ...
Setting up libnet-ssh2-perl (0.63-1) ...
Setting up libnet-syslog-perl (0.04-1) ...
Setting up libnet-telnet-cisco-perl (1.10-5) ...
Setting up libnetpacket-perl (1.5.0-1) ...
Setting up libnumber-range-perl (0.12-1) ...
Setting up libparse-nessus-nbe-perl (1.1-1) ...
Setting up libpod-spell-perl (1.15-1) ...
Setting up libppi-perl (1.218-1) ...
Setting up libppix-regexp-perl (0.036-1) ...
Setting up libppix-utilities-perl (1.001000-1) ...
Setting up libstring-format-perl (1.17-1) ...
Setting up perltidy (20140328-1) ...
Setting up libperl-critic-perl (1.122-1) ...
Setting up libperl-version-perl (1.013-1) ...
Setting up libphp-serialization-perl (0.34-1) ...
Setting up libpod-coverage-perl (0.23-1) ...
Setting up libposix-2008-perl (0.03-1) ...
Setting up libposix-atfork-perl (0.02-2) ...
Setting up libproc-processtable-perl (0.51-1) ...
Setting up libredis-fast-perl (0.16-1) ...
Setting up libregexp-common-email-address-perl (1.01-4) ...
Setting up libregexp-common-time-perl (0.07-1) ...
Setting up librose-object-perl (0.860-1) ...
Setting up librose-datetime-perl (0.540-1) ...
Setting up libsql-reservedwords-perl (0.8-1) ...
Setting up libtime-clock-perl (1.01-1) ...
Setting up librose-db-perl (0.775-1) ...
Setting up librose-db-object-perl (1:0.811-1) ...
Setting up librrds-perl (1.4.8-1.2) ...
Setting up libscalar-list-utils-perl (1:1.41-1) ...
Setting up libsnmp-perl (5.7.2.1+dfsg-1) ...
Setting up libsoap-lite-perl (1.11-1) ...
Setting up libsort-naturally-perl (1.03-1) ...
Setting up libsql-abstract-more-perl (1.28-1) ...
Setting up libsystemd-daemon-perl (0.07-1) ...
Setting up libtemplate-autofilter-perl (0.143050-2) ...
Setting up libterm-size-perl-perl (0.029-1) ...
Setting up libterm-size-any-perl (0.001-1) ...
Setting up libtext-diff-perl (1.41-1) ...
Setting up libtest-differences-perl (0.62-1) ...
Setting up libtest-mockdbi-perl (0.70-1) ...
Setting up libtest-perl-critic-perl (1.02-1) ...
Setting up libtest-pod-coverage-perl (1.10-1) ...
Setting up libtest-pod-perl (1.48-1) ...
Setting up libtext-csv-xs-perl (1.11-2) ...
Setting up libthread-conveyor-monitored-perl (0.14-1) ...
Setting up libthread-serialize-perl (1.01-1) ...
Setting up libthread-tie-perl (0.13-1) ...
Setting up libthread-conveyor-perl (0.19-1) ...
Setting up libthread-pool-perl (0.33-1) ...
Setting up libthread-pool-simple-perl (0.25-1) ...
Setting up libtie-dxhash-perl (1.05-1) ...
Setting up libtime-period-perl (1.25-1) ...
Setting up libuniversal-exports-perl (0.05-2) ...
Setting up liburi-escape-xs-perl (0.12-1+b1) ...
Setting up libv8-3.14.5 (3.14.5.8-8.1) ...
Setting up libwww-curl-perl (4.17-1+b1) ...
Setting up libwww-twilio-api-perl (0.21-1) ...
Setting up perl-doc (5.20.2-3+deb8u7) ...
Setting up perlmagick (8:6.8.9.9-5+deb8u9) ...
Setting up python-cairo (1.8.8-1+b2) ...
Setting up python-django-common (1.7.11-1+deb8u2) ...
Setting up python-django (1.7.11-1+deb8u2) ...
Setting up python-django-tagging (1:0.3.1-4) ...
Setting up python-pyparsing (2.0.3+dfsg1-1) ...
Setting up python-simplejson (3.6.5-1) ...
Setting up python-tz (2012c+dfsg-0.1) ...
Setting up smistrip (0.4.8+dfsg2-10) ...
Setting up snmp (5.7.2.1+dfsg-1) ...
Setting up snmp-mibs-downloader (1.1) ...

Downloading documents and extracting MIB files.
This will take some minutes.

In case this process fails, it can always be repeated later by executing
/usr/bin/download-mibs again.

RFC1155-SMI: 119 lines.
RFC1213-MIB: 2613 lines.
NOTE: SMUX: ignored.
SMUX-MIB: 158 lines.
CLNS-MIB: 1294 lines.
RFC1381-MIB: 1007 lines.
RFC1382-MIB: 2627 lines.
RFC1414-MIB: 131 lines.
SNMPv2-PARTY-MIB: 1410 lines.
SNMPv2-M2M-MIB: 807 lines.
MIOX25-MIB: 708 lines.
PPP-LCP-MIB: 764 lines.
PPP-SEC-MIB: 289 lines.
PPP-IP-NCP-MIB: 203 lines.
PPP-BRIDGE-NCP-MIB: 429 lines.
FDDI-SMT73-MIB: 2126 lines.
TOKEN-RING-RMON-MIB: 2302 lines.
SOURCE-ROUTING-MIB: 450 lines.
DECNET-PHIV-MIB: 3030 lines.
DSA-MIB: 642 lines.
DPI20-MIB: 47 lines.
IBM-6611-APPN-MIB: 5112 lines.
DNS-SERVER-MIB: 1078 lines.
DNS-RESOLVER-MIB: 1196 lines.
UPS-MIB: 1899 lines.
CHARACTER-MIB: 646 lines.
RS-232-MIB: 788 lines.
PARALLEL-MIB: 286 lines.
SNA-NAU-MIB: 2765 lines.
SIP-MIB: 1099 lines.
Modem-MIB: 1340 lines.
RDBMS-MIB: 1377 lines.
RIPv2-MIB: 532 lines.
APPLETALK-MIB: 3398 lines.
SNA-SDLC-MIB: 2761 lines.
TOKENRING-MIB: 836 lines.
TOKENRING-STATION-SR-MIB: 175 lines.
TCPIPX-MIB: 331 lines.
SNMPv2-USEC-MIB: 238 lines.
MIP-MIB: 2127 lines.
DOT12-IF-MIB: 772 lines.
DLSW-MIB: 3560 lines.
APPC-MIB: 5104 lines.
SNMP-REPEATER-MIB: 3265 lines.
FRAME-RELAY-DTE-MIB: 992 lines.
ISDN-MIB: 1260 lines.
DIAL-CONTROL-MIB: 1270 lines.
RSVP-MIB: 2660 lines.
INTEGRATED-SERVICES-MIB: 750 lines.
INTEGRATED-SERVICES-GUARANTEED-MIB: 218 lines.
APPN-DLUR-MIB: 632 lines.
HPR-MIB: 1270 lines.
DOT12-RPTR-MIB: 1978 lines.
SYSAPPL-MIB: 1539 lines.
IPOA-MIB: 1654 lines.
IPATM-IPMC-MIB: 3244 lines.
IPV6-TCP-MIB: 211 lines.
IPV6-UDP-MIB: 141 lines.
APPN-MIB: 5611 lines.
APPN-TRAP-MIB: 477 lines.
EBN-MIB: 702 lines.
IPV6-TC: 67 lines.
IPV6-MIB: 1443 lines.
IPV6-ICMP-MIB: 529 lines.
DS0-MIB: 305 lines.
DS0BUNDLE-MIB: 311 lines.
ATM-ACCOUNTING-INFORMATION-MIB: 402 lines.
ACCOUNTING-CONTROL-MIB: 768 lines.
ATM-TC-MIB: 713 lines.
ATM-MIB: 2995 lines.
TN3270E-MIB: 1953 lines.
TN3270E-RT-MIB: 896 lines.
APPLICATION-MIB: 2995 lines.
SNMPv2-SMI: 344 lines.
NOTE: FIZBIN-MIB: ignored.
SNMPv2-TC: 772 lines.
SNMPv2-CONF: 322 lines.
HPR-IP-MIB: 487 lines.
WWW-MIB: 1272 lines.
DIRECTORY-SERVER-MIB: 772 lines.
SMON-MIB: 1254 lines.
ADSL-TC-MIB: 113 lines.
ADSL-LINE-MIB: 4328 lines.
ETHER-CHIPSET-MIB: 532 lines.
NHRP-MIB: 2596 lines.
Job-Monitoring-MIB: 1652 lines.
FLOW-METER-MIB: 1901 lines.
AGENTX-MIB: 527 lines.
SLAPM-MIB: 2842 lines.
SNMP-USM-DH-OBJECTS-MIB: 532 lines.
VRRP-MIB: 789 lines.
NETWORK-SERVICES-MIB: 626 lines.
MTA-MIB: 1226 lines.
HOST-RESOURCES-MIB: 1540 lines.
HOST-RESOURCES-TYPES: 389 lines.
RMON-MIB: 3980 lines.
FIBRE-CHANNEL-FE-MIB: 1781 lines.
HCNUM-TC: 118 lines.
IF-MIB: 1814 lines.
IF-INVERTED-STACK-MIB: 149 lines.
PTOPO-MIB: 804 lines.
IPMROUTE-STD-MIB: 869 lines.
IGMP-STD-MIB: 516 lines.
PIM-MIB: 889 lines.
COPS-CLIENT-MIB: 844 lines.
FRNETSERV-MIB: 2479 lines.
FR-ATM-PVC-SERVICE-IWF-MIB: 1066 lines.
RTP-MIB: 981 lines.
DISMAN-EVENT-MIB: 1882 lines.
DISMAN-EXPRESSION-MIB: 1182 lines.
NOTIFICATION-LOG-MIB: 753 lines.
IPV6-MLD-MIB: 417 lines.
FR-MFR-MIB: 888 lines.
PINT-MIB: 573 lines.
DOCS-BPI-MIB: 1569 lines.
INTERFACETOPN-MIB: 1023 lines.
DISMAN-SCRIPT-MIB: 1764 lines.
SFLOW-MIB: 389 lines.
CIRCUIT-IF-MIB: 369 lines.
FRSLD-MIB: 1768 lines.
DISMAN-SCHEDULE-MIB: 699 lines.
HC-RMON-MIB: 3149 lines.
DSMON-MIB: 4449 lines.
DIFFSERV-DSCP-TC: 64 lines.
DIFFSERV-MIB: 3514 lines.
GSMP-MIB: 1582 lines.
L2TP-MIB: 2664 lines.
SNMP-FRAMEWORK-MIB: 526 lines.
SNMP-MPD-MIB: 145 lines.
NOTE: : ignored.
SNMP-TARGET-MIB: 660 lines.
SNMP-NOTIFICATION-MIB: 589 lines.
SNMP-PROXY-MIB: 294 lines.
NOTE: : ignored.
SNMP-USER-BASED-SM-MIB: 912 lines.
SNMP-VIEW-BASED-ACM-MIB: 830 lines.
SNMPv2-PDU: 133 lines.
SNMPv2-TM: 176 lines.
SNMPv2-MIB: 854 lines.
TRANSPORT-ADDRESS-MIB: 421 lines.
ENTITY-SENSOR-MIB: 440 lines.
HC-ALARM-MIB: 707 lines.
ADSL-LINE-EXT-MIB: 1169 lines.
APS-MIB: 1659 lines.
MALLOC-MIB: 1364 lines.
SNMP-COMMUNITY-MIB: 505 lines.
OPT-IF-MIB: 6616 lines.
SONET-MIB: 2360 lines.
PerfHist-TC-MIB: 178 lines.
IPV6-FLOW-LABEL-MIB: 58 lines.
ATM2-MIB: 3220 lines.
POWER-ETHERNET-MIB: 621 lines.
EtherLike-MIB: 1862 lines.
HC-PerfHist-TC-MIB: 222 lines.
VDSL-LINE-MIB: 2844 lines.
APM-MIB: 2127 lines.
DIFFSERV-CONFIG-MIB: 243 lines.
NOTE: IANA-PRINTER-MIB: ignored.
Printer-MIB: 4389 lines.
NOTE: IANA-FINISHER-MIB: ignored.
Finisher-MIB: 869 lines.
MPLS-TC-STD-MIB: 635 lines.
MPLS-TE-STD-MIB: 2483 lines.
MPLS-LSR-STD-MIB: 2106 lines.
MPLS-FTN-STD-MIB: 1030 lines.
MPLS-LDP-STD-MIB: 2408 lines.
MPLS-LDP-ATM-STD-MIB: 757 lines.
MPLS-LDP-FRAME-RELAY-STD-MIB: 641 lines.
MPLS-LDP-GENERIC-STD-MIB: 321 lines.
ROHC-MIB: 1133 lines.
ROHC-UNCOMPRESSED-MIB: 197 lines.
ROHC-RTP-MIB: 636 lines.
SNMP-USM-AES-MIB: 62 lines.
TRIP-TC-MIB: 132 lines.
TRIP-MIB: 2007 lines.
SCTP-MIB: 1342 lines.
ALARM-MIB: 1127 lines.
NOTE: IANA-ITU-ALARM-TC-MIB: ignored.
ITU-ALARM-TC-MIB: 86 lines.
ITU-ALARM-MIB: 486 lines.
ARC-MIB: 396 lines.
DS3-MIB: 1786 lines.
TE-MIB: 1679 lines.
INET-ADDRESS-MIB: 402 lines.
NAT-MIB: 2391 lines.
POLICY-BASED-MANAGEMENT-MIB: 2060 lines.
TCP-MIB: 785 lines.
DOCS-IETF-SUBMGT-MIB: 672 lines.
FC-MGMT-MIB: 2205 lines.
VDSL-LINE-EXT-SCM-MIB: 420 lines.
VDSL-LINE-EXT-MCM-MIB: 662 lines.
TUNNEL-MIB: 738 lines.
UDP-MIB: 549 lines.
DOCS-IETF-BPI2-MIB: 3451 lines.
ENTITY-MIB: 1411 lines.
SSPM-MIB: 1029 lines.
TPM-MIB: 1916 lines.
BRIDGE-MIB: 1472 lines.
TE-LINK-STD-MIB: 1745 lines.
VPN-TC-STD-MIB: 72 lines.
ENTITY-STATE-TC-MIB: 169 lines.
ENTITY-STATE-MIB: 332 lines.
BGP4-MIB: 1232 lines.
IP-FORWARD-MIB: 1277 lines.
IP-MIB: 4993 lines.
MOBILEIPV6-MIB: 3984 lines.
RSTP-MIB: 306 lines.
HDSL2-SHDSL-LINE-MIB: 2503 lines.
DOCS-IETF-QOS-MIB: 3060 lines.
P-BRIDGE-MIB: 1157 lines.
Q-BRIDGE-MIB: 2367 lines.
MPLS-LC-ATM-STD-MIB: 336 lines.
MPLS-LC-FR-STD-MIB: 263 lines.
IFCP-MGMT-MIB: 1015 lines.
MPLS-L3VPN-STD-MIB: 1588 lines.
FCIP-MGMT-MIB: 1037 lines.
T11-FC-NAME-SERVER-MIB: 1136 lines.
T11-TC-MIB: 67 lines.
T11-FC-FABRIC-ADDR-MGR-MIB: 1241 lines.
ISIS-MIB: 4317 lines.
SCSI-MIB: 2758 lines.
AGGREGATE-MIB: 477 lines.
TIME-AGGREGATE-MIB: 375 lines.
RMON2-MIB: 5711 lines.
ISCSI-MIB: 3097 lines.
IPS-AUTH-MIB: 1156 lines.
DOCS-IF-MIB: 5291 lines.
DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB: 1453 lines.
DISMAN-PING-MIB: 1561 lines.
DISMAN-TRACEROUTE-MIB: 1850 lines.
DISMAN-NSLOOKUP-MIB: 509 lines.
MSDP-MIB: 1182 lines.
T11-FC-ROUTE-MIB: 448 lines.
T11-FC-FSPF-MIB: 1170 lines.
LMP-MIB: 3185 lines.
DOCS-CABLE-DEVICE-MIB: 3141 lines.
RADIUS-AUTH-CLIENT-MIB: 710 lines.
RADIUS-AUTH-SERVER-MIB: 774 lines.
RADIUS-ACC-CLIENT-MIB: 638 lines.
RADIUS-ACC-SERVER-MIB: 727 lines.
RADIUS-DYNAUTH-CLIENT-MIB: 767 lines.
RADIUS-DYNAUTH-SERVER-MIB: 699 lines.
PKTC-IETF-MTA-MIB: 2081 lines.
ADSL2-LINE-TC-MIB: 729 lines.
ADSL2-LINE-MIB: 5476 lines.
RAQMON-MIB: 1417 lines.
RAQMON-RDS-MIB: 672 lines.
T11-FC-VIRTUAL-FABRIC-MIB: 523 lines.
OSPF-MIB: 4164 lines.
OSPF-TRAP-MIB: 584 lines.
SIP-TC-MIB: 177 lines.
SIP-COMMON-MIB: 1913 lines.
SIP-UA-MIB: 200 lines.
SIP-SERVER-MIB: 869 lines.
SNMP-IEEE802-TM-MIB: 40 lines.
GMPLS-TC-STD-MIB: 124 lines.
GMPLS-TE-STD-MIB: 1749 lines.
NOTE: IANA-GMPLS-TC-MIB: ignored.
GMPLS-LSR-STD-MIB: 503 lines.
GMPLS-LABEL-STD-MIB: 689 lines.
DS1-MIB: 3015 lines.
IPSEC-SPD-MIB: 2682 lines.
MAU-MIB: 1740 lines.
NOTE: IANA-MAU-MIB: ignored.
DOT3-EPON-MIB: 2532 lines.
DOT3-OAM-MIB: 2115 lines.
TCP-ESTATS-MIB: 2941 lines.
T11-FC-FABRIC-CONFIG-SERVER-MIB: 1717 lines.
T11-FC-FABRIC-LOCK-MIB: 490 lines.
T11-FC-ZONE-SERVER-MIB: 2638 lines.
ISNS-MIB: 3243 lines.
T11-FC-RSCN-MIB: 751 lines.
URI-TC-MIB: 133 lines.
PIM-STD-MIB: 3746 lines.
IF-CAP-STACK-MIB: 284 lines.
EFM-CU-MIB: 2995 lines.
UDPLITE-MIB: 513 lines.
PKTC-IETF-SIG-MIB: 3021 lines.
LANGTAG-TC-MIB: 56 lines.
IPMCAST-MIB: 2391 lines.
MIDCOM-MIB: 2260 lines.
PIM-BSR-MIB: 699 lines.
T11-FC-SP-TC-MIB: 637 lines.
T11-FC-SP-AUTHENTICATION-MIB: 920 lines.
T11-FC-SP-ZONING-MIB: 550 lines.
T11-FC-SP-POLICY-MIB: 4274 lines.
T11-FC-SP-SA-MIB: 2483 lines.
SYSLOG-TC-MIB: 202 lines.
PKTC-IETF-EVENT-MIB: 1163 lines.
NEMO-MIB: 1739 lines.
MGMD-STD-MIB: 1524 lines.
RSERPOOL-MIB: 1439 lines.
PW-TC-STD-MIB: 288 lines.
SNMP-TSM-MIB: 234 lines.
SNMP-SSH-TM-MIB: 329 lines.
NOTE: IANA-PWE3-MIB: ignored.
PW-STD-MIB: 2438 lines.
PW-MPLS-STD-MIB: 914 lines.
PW-ENET-STD-MIB: 491 lines.
PW-TDM-MIB: 1336 lines.
PW-ATM-MIB: 1205 lines.
OSPFV3-MIB: 3951 lines.
VDSL2-LINE-TC-MIB: 1479 lines.
VDSL2-LINE-MIB: 7189 lines.
SYSLOG-MSG-MIB: 598 lines.
DVB-RCS-MIB: 3329 lines.
FORCES-MIB: 391 lines.
IPFIX-MIB: 1677 lines.
NOTE: IPFIX-SELECTOR-MIB: ignored.
CAPWAP-BASE-MIB: 2618 lines.
CAPWAP-DOT11-MIB: 369 lines.
patching file ADSL-LINE-MIB
patching file DLSW-MIB
patching file DSA-MIB
patching file FDDI-SMT73-MIB
patching file HPR-MIB
patching file MIP-MIB
patching file Modem-MIB
patching file PPP-LCP-MIB
patching file RDBMS-MIB
patching file RFC1414-MIB
patching file SNA-NAU-MIB
patching file TCPIPX-MIB
patching file UPS-MIB
patching file SMUX-MIB
IANA-PWE3-MIB: 137 lines.
NOTE: PW-STD-MIB: ignored.
gzip: /tmp/tmp.lYfzhdPFyv/ianaiprouteprotocol-mib: unknown suffix -- ignored
gzip: /tmp/tmp.lYfzhdPFyv/ianamalloc-mib: unknown suffix -- ignored
IANAifType-MIB: 593 lines.
IANA-LANGUAGE-MIB: 123 lines.
IANA-ADDRESS-FAMILY-NUMBERS-MIB: 123 lines.
IANA-RTPROTO-MIB: 87 lines.
IANATn3270eTC-MIB: 300 lines.
IANA-MALLOC-MIB: 65 lines.
IANA-CHARSET-MIB: 342 lines.
IANA-PRINTER-MIB: 2084 lines.
IANA-FINISHER-MIB: 283 lines.
IANA-ITU-ALARM-TC-MIB: 330 lines.
IANA-GMPLS-TC-MIB: 303 lines.
IANA-IPPM-METRICS-REGISTRY-MIB: 650 lines.
IANA-MAU-MIB: 895 lines.
IPFIX-SELECTOR-MIB: 167 lines.
Setting up snmpd (5.7.2.1+dfsg-1) ...
adduser: Warning: The home directory `/var/lib/snmp' does not belong to the user you are currently creating.
Setting up snmptrapfmt (1.14+nmu1+b1) ...
Setting up sudo (1.8.10p3-1+deb8u4) ...
Setting up graphite-web (0.9.12+debian-6) ...
Setting up ipset (6.23-2) ...
Setting up ipvsadm (1:1.26-4) ...
Setting up keepalived (1:1.2.13-1) ...
Setting up libauthen-radius-perl (0.24-1) ...
Setting up libcrypt-smbhash-perl (0.12-4) ...
Setting up libmime-lite-tt-perl (0.02-1) ...
Setting up libnet-radius-perl (2.103-1) ...
Setting up libnet-rawip-perl (0.25-2+b1) ...
Setting up nodejs (0.10.29~dfsg-2) ...
update-alternatives: using /usr/bin/nodejs to provide /usr/bin/js (js) in auto mode
Setting up p0f (3.06b-2) ...
Setting up sscep (0.6.1-1) ...
Setting up vlan (1.9-3.2) ...
Setting up libgtk-3-bin (3.14.5-1+deb8u1) ...
Setting up adwaita-icon-theme (3.14.0-2) ...
Setting up libcupsimage2:amd64 (1.7.5-11+deb8u1) ...
Setting up libcupsfilters1:amd64 (1.0.61-5+deb8u3) ...
Setting up liblvm2cmd2.02:amd64 (2.02.111-2.2+deb8u1) ...
Setting up libmysqlclient18 (10.1.22+maria-1~jessie) ...
Setting up libmariadbclient18 (10.1.22+maria-1~jessie) ...
Setting up mariadb-client-core-10.1 (10.1.22+maria-1~jessie) ...
Setting up mariadb-client-10.1 (10.1.22+maria-1~jessie) ...
Setting up mariadb-server-core-10.1 (10.1.22+maria-1~jessie) ...
Setting up mariadb-server-10.1 (10.1.22+maria-1~jessie) ...
Installing new version of config file /etc/apparmor.d/usr.sbin.mysqld ...
Installing new version of config file /etc/init.d/mysql ...
Installing new version of config file /etc/logrotate.d/mysql-server ...
Installing new version of config file /etc/mysql/conf.d/mysqld_safe_syslog.cnf ...
Installing new version of config file /etc/mysql/debian-start ...
2017-07-12  9:40:44 140332302690176 [Note] Using unique option prefix 'key_buffer' is error-prone and can break in the future. Please use the full name 'key_buffer_size' instead.
2017-07-12  9:40:44 140332302690176 [Note] /usr/sbin/mysqld (mysqld 10.1.22-MariaDB-1~jessie) starting as process 15671 ...
Setting up ca-certificates-java (20140324) ...
Adding debian:Certum_Trusted_Network_CA.pem
Adding debian:S-TRUST_Authentication_and_Encryption_Root_CA_2005_PN.pem
Adding debian:Entrust.net_Premium_2048_Secure_Server_CA.pem
Adding debian:Verisign_Class_3_Public_Primary_Certification_Authority_-_G3.pem
Adding debian:COMODO_RSA_Certification_Authority.pem
Adding debian:PSCProcert.pem
Adding debian:EC-ACC.pem
Adding debian:Buypass_Class_2_Root_CA.pem
Adding debian:Verisign_Class_3_Public_Primary_Certification_Authority.pem
Adding debian:Hellenic_Academic_and_Research_Institutions_RootCA_2015.pem
Adding debian:OISTE_WISeKey_Global_Root_GB_CA.pem
Adding debian:Hellenic_Academic_and_Research_Institutions_ECC_RootCA_2015.pem
Adding debian:QuoVadis_Root_CA.pem
Adding debian:Certification_Authority_of_WoSign_G2.pem
Adding debian:VeriSign_Class_3_Public_Primary_Certification_Authority_-_G4.pem
Adding debian:QuoVadis_Root_CA_2_G3.pem
Adding debian:AddTrust_Public_Services_Root.pem
Adding debian:AffirmTrust_Premium.pem
Adding debian:TC_TrustCenter_Class_3_CA_II.pem
Adding debian:Comodo_Trusted_Services_root.pem
Adding debian:Chambers_of_Commerce_Root_-_2008.pem
Adding debian:SwissSign_Gold_CA_-_G2.pem
Adding debian:DigiCert_High_Assurance_EV_Root_CA.pem
Adding debian:IdenTrust_Commercial_Root_CA_1.pem
Adding debian:GeoTrust_Universal_CA.pem
Adding debian:GeoTrust_Primary_Certification_Authority_-_G2.pem
Adding debian:UTN_USERFirst_Hardware_Root_CA.pem
Adding debian:XRamp_Global_CA_Root.pem
Adding debian:E-Tugra_Certification_Authority.pem
Adding debian:SwissSign_Silver_CA_-_G2.pem
Adding debian:DigiCert_Trusted_Root_G4.pem
Adding debian:Certinomis_-_Autorité_Racine.pem
Adding debian:COMODO_Certification_Authority.pem
Adding debian:Starfield_Class_2_CA.pem
Adding debian:AddTrust_External_Root.pem
Adding debian:DigiCert_Global_Root_G2.pem
Adding debian:ISRG_Root_X1.pem
Adding debian:Sonera_Class_2_Root_CA.pem
Adding debian:Juur-SK.pem
Adding debian:Microsec_e-Szigno_Root_CA_2009.pem
Adding debian:DST_Root_CA_X3.pem
Adding debian:Certigna.pem
Adding debian:thawte_Primary_Root_CA_-_G2.pem
Adding debian:RSA_Security_2048_v3.pem
Adding debian:D-TRUST_Root_Class_3_CA_2_EV_2009.pem
Adding debian:Microsec_e-Szigno_Root_CA.pem
Adding debian:ssl-cert-snakeoil.pem
Adding debian:Entrust_Root_Certification_Authority_-_EC1.pem
Adding debian:WoSign_China.pem
Adding debian:Security_Communication_RootCA2.pem
Adding debian:Baltimore_CyberTrust_Root.pem
Adding debian:Swisscom_Root_EV_CA_2.pem
Adding debian:spi-cacert-2008.pem
Adding debian:Hongkong_Post_Root_CA_1.pem
Adding debian:WoSign.pem
Adding debian:Starfield_Root_Certificate_Authority_-_G2.pem
Adding debian:GeoTrust_Global_CA_2.pem
Adding debian:SecureSign_RootCA11.pem
Adding debian:VeriSign_Class_3_Public_Primary_Certification_Authority_-_G5.pem
Adding debian:GlobalSign_Root_CA_-_R2.pem
Adding debian:Buypass_Class_3_Root_CA.pem
Adding debian:OpenTrust_Root_CA_G1.pem
Adding debian:DigiCert_Assured_ID_Root_G2.pem
Adding debian:Root_CA_Generalitat_Valenciana.pem
Adding debian:Taiwan_GRCA.pem
Adding debian:NetLock_Arany_=Class_Gold=_Főtanúsítvány.pem
Adding debian:Starfield_Services_Root_Certificate_Authority_-_G2.pem
Adding debian:thawte_Primary_Root_CA_-_G3.pem
Adding debian:Staat_der_Nederlanden_Root_CA_-_G2.pem
Adding debian:Entrust_Root_Certification_Authority.pem
Adding debian:Global_Chambersign_Root_-_2008.pem
Adding debian:Hellenic_Academic_and_Research_Institutions_RootCA_2011.pem
Adding debian:Comodo_AAA_Services_root.pem
Adding debian:ApplicationCA_-_Japanese_Government.pem
Adding debian:TWCA_Global_Root_CA.pem
Adding debian:Staat_der_Nederlanden_Root_CA_-_G3.pem
Adding debian:SecureTrust_CA.pem
Adding debian:SwissSign_Platinum_CA_-_G2.pem
Adding debian:IdenTrust_Public_Sector_Root_CA_1.pem
Adding debian:Certplus_Root_CA_G2.pem
Adding debian:Equifax_Secure_eBusiness_CA_1.pem
Adding debian:Verisign_Class_1_Public_Primary_Certification_Authority_-_G3.pem
Adding debian:T-TeleSec_GlobalRoot_Class_2.pem
Adding debian:AffirmTrust_Commercial.pem
Adding debian:Security_Communication_EV_RootCA1.pem
Adding debian:QuoVadis_Root_CA_2.pem
Adding debian:Verisign_Class_2_Public_Primary_Certification_Authority_-_G3.pem
Adding debian:Secure_Global_CA.pem
Adding debian:AddTrust_Qualified_Certificates_Root.pem
Adding debian:Camerfirma_Chambers_of_Commerce_Root.pem
Adding debian:DST_ACES_CA_X6.pem
Adding debian:Equifax_Secure_CA.pem
Adding debian:TÜRKTRUST_Elektronik_Sertifika_Hizmet_Sağlayıcısı_H5.pem
Adding debian:Comodo_Secure_Services_root.pem
Adding debian:VeriSign_Universal_Root_Certification_Authority.pem
Adding debian:OISTE_WISeKey_Global_Root_GA_CA.pem
Adding debian:AddTrust_Low-Value_Services_Root.pem
Adding debian:Swisscom_Root_CA_1.pem
Adding debian:Certplus_Root_CA_G1.pem
Adding debian:GlobalSign_ECC_Root_CA_-_R5.pem
Adding debian:StartCom_Certification_Authority_G2.pem
Adding debian:USERTrust_ECC_Certification_Authority.pem
Adding debian:China_Internet_Network_Information_Center_EV_Certificates_Root.pem
Adding debian:OpenTrust_Root_CA_G2.pem
Adding debian:Certplus_Class_2_Primary_CA.pem
Adding debian:Go_Daddy_Root_Certificate_Authority_-_G2.pem
Adding debian:OpenTrust_Root_CA_G3.pem
Adding debian:QuoVadis_Root_CA_1_G3.pem
Adding debian:Network_Solutions_Certificate_Authority.pem
Adding debian:GeoTrust_Universal_CA_2.pem
Adding debian:Certum_Trusted_Network_CA_2.pem
Adding debian:AffirmTrust_Networking.pem
Adding debian:Certinomis_-_Root_CA.pem
Adding debian:ePKI_Root_Certification_Authority.pem
Adding debian:Atos_TrustedRoot_2011.pem
Adding debian:CFCA_EV_ROOT.pem
Adding debian:CA_Disig_Root_R1.pem
Adding debian:IGC_A.pem
Adding debian:DigiCert_Global_Root_G3.pem
Adding debian:GeoTrust_Primary_Certification_Authority.pem
Adding debian:GeoTrust_Primary_Certification_Authority_-_G3.pem
Adding debian:Swisscom_Root_CA_2.pem
Adding debian:ACEDICOM_Root.pem
Adding debian:Actalis_Authentication_Root_CA.pem
Adding debian:S-TRUST_Universal_Root_CA.pem
Adding debian:Go_Daddy_Class_2_CA.pem
Adding debian:CNNIC_ROOT.pem
Adding debian:StartCom_Certification_Authority.pem
Adding debian:D-TRUST_Root_Class_3_CA_2_2009.pem
Adding debian:TWCA_Root_Certification_Authority.pem
Adding debian:EE_Certification_Centre_Root_CA.pem
Adding debian:Trustis_FPS_Root_CA.pem
Adding debian:Verisign_Class_1_Public_Primary_Certification_Authority.pem
Adding debian:Deutsche_Telekom_Root_CA_2.pem
Adding debian:COMODO_ECC_Certification_Authority.pem
Adding debian:ACCVRAIZ1.pem
Adding debian:thawte_Primary_Root_CA.pem
Adding debian:certSIGN_ROOT_CA.pem
Adding debian:Visa_eCommerce_Root.pem
Adding debian:WellsSecure_Public_Root_Certificate_Authority.pem
Adding debian:T-TeleSec_GlobalRoot_Class_3.pem
Adding debian:GeoTrust_Global_CA.pem
Adding debian:TeliaSonera_Root_CA_v1.pem
Adding debian:SZAFIR_ROOT_CA2.pem
Adding debian:Entrust_Root_Certification_Authority_-_G2.pem
Adding debian:Cybertrust_Global_Root.pem
Adding debian:DigiCert_Assured_ID_Root_G3.pem
Adding debian:AC_Raíz_Certicámara_S.A..pem
Adding debian:DigiCert_Assured_ID_Root_CA.pem
Adding debian:GlobalSign_ECC_Root_CA_-_R4.pem
Adding debian:GlobalSign_Root_CA_-_R3.pem
Adding debian:StartCom_Certification_Authority_2.pem
Adding debian:GlobalSign_Root_CA.pem
Adding debian:UTN_USERFirst_Email_Root_CA.pem
Adding debian:TÜRKTRUST_Elektronik_Sertifika_Hizmet_Sağlayıcısı_H6.pem
Adding debian:AffirmTrust_Premium_ECC.pem
Adding debian:Camerfirma_Global_Chambersign_Root.pem
Adding debian:Izenpe.com.pem
Adding debian:Certum_Root_CA.pem
Adding debian:QuoVadis_Root_CA_3_G3.pem
Adding debian:DigiCert_Global_Root_CA.pem
Adding debian:TURKTRUST_Certificate_Services_Provider_Root_2007.pem
Adding debian:QuoVadis_Root_CA_3.pem
Adding debian:EBG_Elektronik_Sertifika_Hizmet_Sağlayıcısı.pem
Adding debian:Buypass_Class_2_CA_1.pem
Adding debian:Staat_der_Nederlanden_EV_Root_CA.pem
Adding debian:USERTrust_RSA_Certification_Authority.pem
Adding debian:Equifax_Secure_Global_eBusiness_CA.pem
Adding debian:CA_Disig_Root_R2.pem
Adding debian:TÜBİTAK_UEKAE_Kök_Sertifika_Hizmet_Sağlayıcısı_-_Sürüm_3.pem
Adding debian:CA_WoSign_ECC_Root.pem
Adding debian:Verisign_Class_2_Public_Primary_Certification_Authority_-_G2.pem
Adding debian:Autoridad_de_Certificacion_Firmaprofesional_CIF_A62634068.pem
Adding debian:Security_Communication_Root_CA.pem
Adding debian:ComSign_CA.pem
done.
Setting up default-jre-headless (2:1.7-52) ...
Setting up freeradius-mysql (3.0.15.6) ...
Setting up mariadb-server (10.1.22+maria-1~jessie) ...
Setting up python-mysqldb (1.2.3-2.1) ...
Setting up libgtk-3-common (3.14.5-1+deb8u1) ...
Setting up libgtk-3-0:amd64 (3.14.5-1+deb8u1) ...
Setting up libcanberra-gtk3-0:amd64 (0.30-2.1) ...
Setting up dmeventd (2:1.02.90-2.2+deb8u1) ...
Processing triggers for python-twisted-core (14.0.2-3) ...
Setting up packetfence (7.2.0-1) ...
make: Circular conf/ssl/server.key <- conf/ssl/server.key dependency dropped.
openssl genrsa -out /usr/local/pf/conf/ssl/server.key 2048
Generating RSA private key, 2048 bit long modulus
...............................................................................+++
......................................+++
e is 65537 (0x10001)
make: Circular conf/ssl/server.crt <- conf/ssl/server.crt dependency dropped.
openssl req -new -x509 -days 365 \
-out /usr/local/pf/conf/ssl/server.crt \
-key /usr/local/pf/conf/ssl/server.key \
-config /usr/local/pf/conf/openssl.cnf
make: Circular conf/ssl/server.pem <- conf/ssl/server.pem dependency dropped.
cat conf/ssl/server.crt conf/ssl/server.key > conf/ssl/server.pem
Building default RADIUS certificates...
openssl gendh -out dh -2 2048
Generating DH parameters, 2048 bit long safe prime, generator 2
This is going to take a long time
(Removed This Section)
openssl req -new  -out server.csr -nodes -keyout server.key -config ./server.cnf
Generating a 2048 bit RSA private key
..........................+++
............................................+++
writing new private key to 'server.key'
-----
openssl req -new -x509 -nodes -keyout ca.key -out ca.pem \
        -days '1825' -config ./ca.cnf
Generating a 2048 bit RSA private key
.....................................................+++
.......................................................+++
writing new private key to 'ca.key'
-----
openssl ca -batch -keyfile ca.key -cert ca.pem -in server.csr -out server.crt -extensions xpserver_ext -extfile xpextensions -config ./server.cnf
Using configuration from ./server.cnf
Check that the request matches the signature
Signature ok
Certificate Details:
        Serial Number: 1 (0x1)
        Validity
            Not Before: Jul 11 21:42:48 2017 GMT
            Not After : Jul 10 21:42:48 2022 GMT
        Subject:
            countryName               = FR
            stateOrProvinceName       = Radius
            organizationName          = Example Inc.
            commonName                = Example Server Certificate
            emailAddress              = admin@example.org
        X509v3 extensions:
            X509v3 Extended Key Usage:
                TLS Web Server Authentication
            X509v3 CRL Distribution Points:

                Full Name:
                  URI:http://www.example.com/example_ca.crl

Certificate is to be certified until Jul 10 21:42:48 2022 GMT (1825 days)

Write out database with 1 new entries
Data Base Updated
openssl pkcs12 -export -in server.crt -inkey server.key -out server.p12  -passin pass:'whatever' -passout pass:'whatever'
openssl pkcs12 -in server.p12 -out server.pem -passin pass:'whatever' -passout pass:'whatever'
MAC verified OK
server.pem: OK
openssl x509 -inform PEM -outform DER -in ca.pem -out ca.der
openssl req -new  -out client.csr -nodes -keyout client.key -config ./client.cnf
Generating a 2048 bit RSA private key
....................................................+++
...........................................................+++
writing new private key to 'client.key'
-----
openssl ca -batch -keyfile ca.key -cert ca.pem -in client.csr -out client.crt -extensions xpclient_ext -extfile xpextensions -config ./client.cnf
Using configuration from ./client.cnf
Check that the request matches the signature
Signature ok
Certificate Details:
        Serial Number: 2 (0x2)
        Validity
            Not Before: Jul 11 21:42:49 2017 GMT
            Not After : Sep  9 21:42:49 2017 GMT
        Subject:
            countryName               = FR
            stateOrProvinceName       = Radius
            organizationName          = Example Inc.
            commonName                = user@example.org
            emailAddress              = user@example.org
        X509v3 extensions:
            X509v3 Extended Key Usage:
                TLS Web Client Authentication
            X509v3 CRL Distribution Points:

                Full Name:
                  URI:http://www.example.com/example_ca.crl

Certificate is to be certified until Sep  9 21:42:49 2017 GMT (60 days)

Write out database with 1 new entries
Data Base Updated
openssl pkcs12 -export -in client.crt -inkey client.key -out client.p12  -passin pass:'whatever' -passout pass:'whatever'
openssl pkcs12 -in client.p12 -out client.pem -passin pass:'whatever' -passout pass:'whatever'
MAC verified OK
cp client.pem 'user@example.org'.pem
pf.conf doesnt exits
Restarting rsyslog
Synchronizing state for freeradius.service with sysvinit using update-rc.d...
Executing /usr/sbin/update-rc.d freeradius defaults
Executing /usr/sbin/update-rc.d freeradius disable
insserv: warning: current start runlevel(s) (empty) of script `freeradius' overrides LSB defaults (2 3 4 5).
insserv: warning: current stop runlevel(s) (0 1 2 3 4 5 6) of script `freeradius' overrides LSB defaults (0 1 6).
Synchronizing state for collectd.service with sysvinit using update-rc.d...
Executing /usr/sbin/update-rc.d collectd defaults
Executing /usr/sbin/update-rc.d collectd disable
insserv: warning: current start runlevel(s) (empty) of script `collectd' overrides LSB defaults (2 3 4 5).
insserv: warning: current stop runlevel(s) (0 1 2 3 4 5 6) of script `collectd' overrides LSB defaults (0 1 6).
Synchronizing state for haproxy.service with sysvinit using update-rc.d...
Executing /usr/sbin/update-rc.d haproxy defaults
Executing /usr/sbin/update-rc.d haproxy disable
insserv: warning: current start runlevel(s) (empty) of script `haproxy' overrides LSB defaults (2 3 4 5).
insserv: warning: current stop runlevel(s) (0 1 2 3 4 5 6) of script `haproxy' overrides LSB defaults (0 1 6).
Synchronizing state for carbon-cache.service with sysvinit using update-rc.d...
Executing /usr/sbin/update-rc.d carbon-cache defaults
Executing /usr/sbin/update-rc.d carbon-cache disable
insserv: warning: current start runlevel(s) (empty) of script `carbon-cache' overrides LSB defaults (2 3 4 5).
insserv: warning: current stop runlevel(s) (0 1 2 3 4 5 6) of script `carbon-cache' overrides LSB defaults (0 1 6).
Synchronizing state for redis-server.service with sysvinit using update-rc.d...
Executing /usr/sbin/update-rc.d redis-server defaults
Executing /usr/sbin/update-rc.d redis-server disable
insserv: warning: current start runlevel(s) (empty) of script `redis-server' overrides LSB defaults (2 3 4 5).
insserv: warning: current stop runlevel(s) (0 1 2 3 4 5 6) of script `redis-server' overrides LSB defaults (0 1 6).
Synchronizing state for samba.service with sysvinit using update-rc.d...
Executing /usr/sbin/update-rc.d samba defaults
Executing /usr/sbin/update-rc.d samba disable
update-rc.d: error: samba Default-Start contains no runlevels, aborting.
net.ipv4.ip_forward = 1
Starting PacketFence Administration GUI...
Setting packetfence.target as the default systemd target.
Created symlink from /etc/systemd/system/default.target to /etc/systemd/system/packetfence.target.
Restarting journald to enable persistent logging
Created symlink from /etc/systemd/system/packetfence-base.target.wants/packetfence-mariadb.service to /lib/systemd/system/packetfence-mariadb.service.
Created symlink from /etc/systemd/system/packetfence.target.wants/packetfence-iptables.service to /lib/systemd/system/packetfence-iptables.service.
Created symlink from /etc/systemd/system/packetfence-base.target.wants/packetfence-routes.service to /lib/systemd/system/packetfence-routes.service.
Created symlink from /etc/systemd/system/packetfence.target.wants/packetfence-httpd.admin.service to /lib/systemd/system/packetfence-httpd.admin.service.
Could not write namespace config::PfDefault to L2 cache !
Could not write namespace config::Documentation to L2 cache !
Could not write namespace config::Cluster to L2 cache !
Could not write namespace config::Pf to L2 cache !
Could not write namespace interfaces to L2 cache !
Could not write namespace interfaces::management_network to L2 cache !
Could not write namespace resource::local_secret to L2 cache !
Could not write namespace config::Network to L2 cache !
Could not write namespace config::Switch to L2 cache !
Could not write namespace config::Authentication to L2 cache !
Could not write namespace config::Domain to L2 cache !
Could not write namespace resource::authentication_sources to L2 cache !
Could not write namespace resource::fqdn to L2 cache !
Could not write namespace config::AdminRoles to L2 cache !
Could not write namespace config::ApacheFilters to L2 cache !
Could not write namespace config::Authentication to L2 cache !
Could not write namespace resource::authentication_config_hash to L2 cache !
Could not write namespace resource::authentication_lookup to L2 cache !
Could not write namespace resource::authentication_sources to L2 cache !
Could not write namespace resource::passthroughs to L2 cache !
Could not write namespace config::Profiles to L2 cache !
Could not write namespace resource::guest_self_registration to L2 cache !
Could not write namespace config::BillingTiers to L2 cache !
Could not write namespace config::Cluster to L2 cache !
Could not write namespace config::Pf to L2 cache !
Could not write namespace resource::CaptivePortal to L2 cache !
Could not write namespace resource::Database to L2 cache !
Could not write namespace resource::fqdn to L2 cache !
Could not write namespace config::Pfdetect to L2 cache !
Could not write namespace resource::trapping_range to L2 cache !
Could not write namespace resource::stats_levels to L2 cache !
Could not write namespace resource::passthroughs to L2 cache !
Could not write namespace resource::isolation_passthroughs to L2 cache !
Could not write namespace interfaces to L2 cache !
Could not write namespace interfaces::listen_ints to L2 cache !
Could not write namespace interfaces::dhcplistener_ints to L2 cache !
Could not write namespace interfaces::ha_ints to L2 cache !
Could not write namespace interfaces::internal_nets to L2 cache !
Could not write namespace interfaces::inline_enforcement_nets to L2 cache !
Could not write namespace interfaces::vlan_enforcement_nets to L2 cache !
Could not write namespace interfaces::monitor_int to L2 cache !
Could not write namespace interfaces::management_network to L2 cache !
Could not write namespace interfaces::portal_ints to L2 cache !
Could not write namespace interfaces::inline_nets to L2 cache !
Could not write namespace interfaces::routed_isolation_nets to L2 cache !
Could not write namespace interfaces::routed_registration_nets to L2 cache !
Could not write namespace interfaces::radius_ints to L2 cache !
Could not write namespace resource::cluster_servers to L2 cache !
Could not write namespace resource::cluster_hosts to L2 cache !
Could not write namespace config::DNS_Filters to L2 cache !
Could not write namespace FilterEngine::DNS_Scopes to L2 cache !
Could not write namespace config::DhcpFilters to L2 cache !
Could not write namespace FilterEngine::DhcpScopes to L2 cache !
Could not write namespace config::Documentation to L2 cache !
Could not write namespace config::Domain to L2 cache !
Could not write namespace resource::domain_dns_servers to L2 cache !
Could not write namespace config::Firewall_SSO to L2 cache !
Could not write namespace config::FloatingDevices to L2 cache !
Could not write namespace config::Network to L2 cache !
Could not write namespace interfaces to L2 cache !
Could not write namespace interfaces::listen_ints to L2 cache !
Could not write namespace interfaces::dhcplistener_ints to L2 cache !
Could not write namespace interfaces::ha_ints to L2 cache !
Could not write namespace interfaces::internal_nets to L2 cache !
Could not write namespace interfaces::inline_enforcement_nets to L2 cache !
Could not write namespace interfaces::vlan_enforcement_nets to L2 cache !
Could not write namespace interfaces::monitor_int to L2 cache !
Could not write namespace interfaces::management_network to L2 cache !
Could not write namespace interfaces::portal_ints to L2 cache !
Could not write namespace interfaces::inline_nets to L2 cache !
Could not write namespace interfaces::routed_isolation_nets to L2 cache !
Could not write namespace interfaces::routed_registration_nets to L2 cache !
Could not write namespace interfaces::radius_ints to L2 cache !
Could not write namespace config::PKI_Provider to L2 cache !
Could not write namespace config::PfDefault to L2 cache !
Could not write namespace config::Pf to L2 cache !
Could not write namespace resource::CaptivePortal to L2 cache !
Could not write namespace resource::Database to L2 cache !
Could not write namespace resource::fqdn to L2 cache !
Could not write namespace config::Pfdetect to L2 cache !
Could not write namespace resource::trapping_range to L2 cache !
Could not write namespace resource::stats_levels to L2 cache !
Could not write namespace resource::passthroughs to L2 cache !
Could not write namespace resource::isolation_passthroughs to L2 cache !
Could not write namespace interfaces to L2 cache !
Could not write namespace interfaces::listen_ints to L2 cache !
Could not write namespace interfaces::dhcplistener_ints to L2 cache !
Could not write namespace interfaces::ha_ints to L2 cache !
Could not write namespace interfaces::internal_nets to L2 cache !
Could not write namespace interfaces::inline_enforcement_nets to L2 cache !
Could not write namespace interfaces::vlan_enforcement_nets to L2 cache !
Could not write namespace interfaces::monitor_int to L2 cache !
Could not write namespace interfaces::management_network to L2 cache !
Could not write namespace interfaces::portal_ints to L2 cache !
Could not write namespace interfaces::inline_nets to L2 cache !
Could not write namespace interfaces::routed_isolation_nets to L2 cache !
Could not write namespace interfaces::routed_registration_nets to L2 cache !
Could not write namespace interfaces::radius_ints to L2 cache !
Could not write namespace config::Pfmon to L2 cache !
Could not write namespace config::PfmonDefault to L2 cache !
Could not write namespace config::Pfqueue to L2 cache !
Could not write namespace config::PortalModules to L2 cache !
Could not write namespace config::Profiles to L2 cache !
Could not write namespace FilterEngine::Profile to L2 cache !
Could not write namespace resource::URI_Filters to L2 cache !
Could not write namespace config::Provisioning to L2 cache !
Could not write namespace config::RadiusFilters to L2 cache !
Could not write namespace FilterEngine::RadiusScopes to L2 cache !
Could not write namespace config::Realm to L2 cache !
Could not write namespace config::Report to L2 cache !
Could not write namespace config::Roles to L2 cache !
Could not write namespace config::Scan to L2 cache !
Could not write namespace config::SwitchFilters to L2 cache !
Could not write namespace FilterEngine::SwitchScopes to L2 cache !
Could not write namespace config::Violations to L2 cache !
Could not write namespace FilterEngine::Violation to L2 cache !
Could not write namespace resource::accounting_triggers to L2 cache !
Could not write namespace resource::bandwidth_expired_violations to L2 cache !
Could not write namespace config::VlanFilters to L2 cache !
Could not write namespace FilterEngine::VlanScopes to L2 cache !
Could not write namespace config::Wmi to L2 cache !
Could not write namespace resource::array_test to L2 cache !
Could not write namespace resource::local_secret to L2 cache !
Could not write namespace config::Switch to L2 cache !
Could not write namespace resource::default_switch to L2 cache !
Could not write namespace resource::switches_group to L2 cache !
Could not write namespace resource::switches_ranges to L2 cache !
Could not write namespace interfaces::management_network to L2 cache !
Could not write namespace resource::SwitchTypesConfigured to L2 cache !
Could not write namespace resource::cli_switches to L2 cache !
Could not write namespace resource::reverse_fqdn to L2 cache !
Could not write namespace resource::switches_list to L2 cache !
Can't locate Class/XSAccessor.pm in @INC (you may need to install the Class::XSAccessor module) (@INC contains: /usr/local/pf/lib /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.20.2 /usr/local/share/perl/5.20.2 /usr/lib/x86_64-linux-gnu/perl5/5.20 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.20 /usr/share/perl/5.20 /usr/local/lib/site_perl) at /usr/local/pf/lib/pf/dal/iterator.pm line 19.
BEGIN failed--compilation aborted at /usr/local/pf/lib/pf/dal/iterator.pm line 19.
Compilation failed in require at /usr/local/pf/lib/pf/dal.pm line 25.
BEGIN failed--compilation aborted at /usr/local/pf/lib/pf/dal.pm line 25.
Compilation failed in require at /usr/share/perl/5.20/base.pm line 100.
        ...propagated at /usr/share/perl/5.20/base.pm line 110.
BEGIN failed--compilation aborted at /usr/local/pf/lib/pf/dal/_node.pm line 24.
Compilation failed in require at /usr/share/perl/5.20/base.pm line 100.
        ...propagated at /usr/share/perl/5.20/base.pm line 110.
BEGIN failed--compilation aborted at /usr/local/pf/lib/pf/dal/node.pm line 23.
Compilation failed in require at /usr/local/pf/lib/pf/node.pm line 29.
BEGIN failed--compilation aborted at /usr/local/pf/lib/pf/node.pm line 29.
Compilation failed in require at /usr/local/pf/lib/pf/action.pm line 25.
BEGIN failed--compilation aborted at /usr/local/pf/lib/pf/action.pm line 25.
Compilation failed in require at /usr/local/pf/lib/pf/class.pm line 36.
BEGIN failed--compilation aborted at /usr/local/pf/lib/pf/class.pm line 36.
Compilation failed in require at /usr/local/pf/lib/pf/violation_config.pm line 21.
BEGIN failed--compilation aborted at /usr/local/pf/lib/pf/violation_config.pm line 21.
Compilation failed in require at /usr/local/pf/lib/pf/config.pm line 907.
Job for packetfence-httpd.admin.service failed. See 'systemctl status packetfence-httpd.admin.service' and 'journalctl -xn' for details.
dpkg: error processing package packetfence (--configure):
 subprocess installed post-installation script returned error exit status 1
Processing triggers for ca-certificates (20141019+deb8u3) ...
Updating certificates in /etc/ssl/certs... 0 added, 0 removed; done.
Running hooks in /etc/ca-certificates/update.d....
done.
done.
Setting up openjdk-7-jre-headless:amd64 (7u131-2.6.9-2~deb8u1) ...
update-alternatives: using /usr/lib/jvm/java-7-openjdk-amd64/jre/bin/rmid to provide /usr/bin/rmid (rmid) in auto mode
update-alternatives: using /usr/lib/jvm/java-7-openjdk-amd64/jre/bin/java to provide /usr/bin/java (java) in auto mode
update-alternatives: using /usr/lib/jvm/java-7-openjdk-amd64/jre/bin/keytool to provide /usr/bin/keytool (keytool) in auto mode
update-alternatives: using /usr/lib/jvm/java-7-openjdk-amd64/jre/bin/pack200 to provide /usr/bin/pack200 (pack200) in auto mode
update-alternatives: using /usr/lib/jvm/java-7-openjdk-amd64/jre/bin/rmiregistry to provide /usr/bin/rmiregistry (rmiregistry) in auto mode
update-alternatives: using /usr/lib/jvm/java-7-openjdk-amd64/jre/bin/unpack200 to provide /usr/bin/unpack200 (unpack200) in auto mode
update-alternatives: using /usr/lib/jvm/java-7-openjdk-amd64/jre/bin/orbd to provide /usr/bin/orbd (orbd) in auto mode
update-alternatives: using /usr/lib/jvm/java-7-openjdk-amd64/jre/bin/servertool to provide /usr/bin/servertool (servertool) in auto mode
update-alternatives: using /usr/lib/jvm/java-7-openjdk-amd64/jre/bin/tnameserv to provide /usr/bin/tnameserv (tnameserv) in auto mode
update-alternatives: using /usr/lib/jvm/java-7-openjdk-amd64/jre/lib/jexec to provide /usr/bin/jexec (jexec) in auto mode
Processing triggers for libc-bin (2.19-18+deb8u10) ...
Processing triggers for systemd (215-17+deb8u7) ...
Processing triggers for libgdk-pixbuf2.0-0:amd64 (2.31.1-2+deb8u5) ...
Processing triggers for python-support (1.0.15) ...
Errors were encountered while processing:
 packetfence
E: Sub-process /usr/bin/dpkg returned an error code (1)