Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.10.28-Unraid] (local build)
- Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Seagate BarraCuda 3.5 (SMR)
- Device Model: ST8000DM004-2CX188
- Serial Number: ZCT31N5G
- LU WWN Device Id: 5 000c50 0c6ce8e41
- Firmware Version: 0001
- User Capacity: 8,001,563,222,016 bytes [8.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5425 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-3 T13/2161-D revision 5
- SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Mon Jun 27 08:47:14 2022 PDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM feature is: Unavailable
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- DSN feature is: Unavailable
- ATA Security is: Disabled, NOT FROZEN [SEC1]
- Wt Cache Reorder: Unavailable
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 249) Self-test routine in progress...
- 90% of test remaining.
- Total time to complete Offline
- data collection: ( 0) seconds.
- Offline data collection
- capabilities: (0x73) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- No Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 978) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x30a5) SCT Status supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-- 084 050 006 - 233691741
- 3 Spin_Up_Time PO---- 095 092 000 - 0
- 4 Start_Stop_Count -O--CK 100 100 020 - 74
- 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 808
- 7 Seek_Error_Rate POSR-- 088 060 045 - 627877300
- 9 Power_On_Hours -O--CK 084 084 000 - 14611 (43 41 0)
- 10 Spin_Retry_Count PO--C- 100 100 097 - 0
- 12 Power_Cycle_Count -O--CK 100 100 020 - 29
- 183 Runtime_Bad_Block -O--CK 100 100 000 - 0
- 184 End-to-End_Error -O--CK 100 100 099 - 0
- 187 Reported_Uncorrect -O--CK 099 099 000 - 1
- 188 Command_Timeout -O--CK 100 099 000 - 0 0 16
- 189 High_Fly_Writes -O-RCK 100 100 000 - 0
- 190 Airflow_Temperature_Cel -O---K 061 057 040 - 39 (Min/Max 36/40)
- 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
- 192 Power-Off_Retract_Count -O--CK 100 100 000 - 250
- 193 Load_Cycle_Count -O--CK 096 096 000 - 8325
- 194 Temperature_Celsius -O---K 039 043 000 - 39 (0 22 0 0 0)
- 195 Hardware_ECC_Recovered -O-RC- 084 064 000 - 233691741
- 197 Current_Pending_Sector -O--C- 100 100 000 - 0
- 198 Offline_Uncorrectable ----C- 100 100 000 - 0
- 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
- 240 Head_Flying_Hours ------ 100 253 000 - 13064h+47m+46.696s
- 241 Total_LBAs_Written ------ 100 253 000 - 74064931928
- 242 Total_LBAs_Read ------ 100 253 000 - 406603538354
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x03 GPL R/O 5 Ext. Comprehensive SMART error log
- 0x04 GPL,SL R/O 8 Device Statistics log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x08 GPL R/O 2 Power Conditions log
- 0x09 SL R/W 1 Selective self-test log
- 0x0c GPL R/O 2048 Pending Defects log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters log
- 0x21 GPL R/O 1 Write stream error log
- 0x22 GPL R/O 1 Read stream error log
- 0x24 GPL R/O 512 Current Device Internal Status Data log
- 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa1 GPL,SL VS 24 Device vendor specific log
- 0xa2 GPL VS 8160 Device vendor specific log
- 0xa6 GPL VS 192 Device vendor specific log
- 0xa8-0xa9 GPL,SL VS 136 Device vendor specific log
- 0xab GPL VS 1 Device vendor specific log
- 0xb0 GPL VS 9048 Device vendor specific log
- 0xbd GPL VS 8 Device vendor specific log
- 0xbe-0xbf GPL VS 65535 Device vendor specific log
- 0xc0 GPL,SL VS 1 Device vendor specific log
- 0xc1 GPL,SL VS 16 Device vendor specific log
- 0xc3 GPL,SL VS 8 Device vendor specific log
- 0xc4 GPL,SL VS 24 Device vendor specific log
- 0xd1 GPL VS 264 Device vendor specific log
- 0xd3 GPL VS 1920 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
- Device Error Count: 1
- CR = Command Register
- FEATR = Features Register
- COUNT = Count (was: Sector Count) Register
- LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
- LH = LBA High (was: Cylinder High) Register ] LBA
- LM = LBA Mid (was: Cylinder Low) Register ] Register
- LL = LBA Low (was: Sector Number) Register ]
- DV = Device (was: Device/Head) Register
- DC = Device Control Register
- ER = Error register
- ST = Status register
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 1 [0] occurred at disk power-on lifetime: 8133 hours (338 days + 21 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 01 80 3c 67 08 00 00 Error: UNC at LBA = 0x1803c6708 = 6446409480
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 25 00 00 08 00 00 01 80 3c 62 60 40 00 27d+04:00:08.854 READ DMA EXT
- 25 00 00 08 00 00 01 80 3c 5a 60 40 00 27d+04:00:08.723 READ DMA EXT
- 25 00 00 08 00 00 01 80 3c 52 60 40 00 27d+04:00:08.711 READ DMA EXT
- 25 00 00 08 00 00 01 80 3c 2a 68 40 00 27d+04:00:08.671 READ DMA EXT
- 25 00 00 08 00 00 01 80 3c 22 68 40 00 27d+04:00:08.543 READ DMA EXT
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Self-test routine in progress 90% 14610 -
- # 2 Short offline Completed without error 00% 14609 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 522 (0x020a)
- Device State: Active (0)
- Current Temperature: 39 Celsius
- Power Cycle Min/Max Temperature: 35/40 Celsius
- Lifetime Min/Max Temperature: 23/43 Celsius
- Under/Over Temperature Limit Count: 0/0
- SCT Temperature History Version: 2
- Temperature Sampling Period: 3 minutes
- Temperature Logging Interval: 59 minutes
- Min/Max recommended Temperature: 14/55 Celsius
- Min/Max Temperature Limit: 10/60 Celsius
- Temperature History Size (Index): 128 (66)
- Index Estimated Time Temperature Celsius
- 67 2022-06-22 03:53 36 *****************
- ... ..( 74 skipped). .. *****************
- 14 2022-06-25 05:38 36 *****************
- 15 2022-06-25 06:37 35 ****************
- 16 2022-06-25 07:36 35 ****************
- 17 2022-06-25 08:35 35 ****************
- 18 2022-06-25 09:34 ? -
- 19 2022-06-25 10:33 36 *****************
- 20 2022-06-25 11:32 38 *******************
- ... ..( 10 skipped). .. *******************
- 31 2022-06-25 22:21 38 *******************
- 32 2022-06-25 23:20 36 *****************
- 33 2022-06-26 00:19 36 *****************
- 34 2022-06-26 01:18 35 ****************
- ... ..( 6 skipped). .. ****************
- 41 2022-06-26 08:11 35 ****************
- 42 2022-06-26 09:10 36 *****************
- 43 2022-06-26 10:09 37 ******************
- 44 2022-06-26 11:08 39 ********************
- 45 2022-06-26 12:07 38 *******************
- 46 2022-06-26 13:06 38 *******************
- 47 2022-06-26 14:05 39 ********************
- 48 2022-06-26 15:04 38 *******************
- ... ..( 4 skipped). .. *******************
- 53 2022-06-26 19:59 38 *******************
- 54 2022-06-26 20:58 ? -
- 55 2022-06-26 21:57 39 ********************
- 56 2022-06-26 22:56 36 *****************
- 57 2022-06-26 23:55 35 ****************
- 58 2022-06-27 00:54 35 ****************
- 59 2022-06-27 01:53 36 *****************
- 60 2022-06-27 02:52 35 ****************
- ... ..( 3 skipped). .. ****************
- 64 2022-06-27 06:48 35 ****************
- 65 2022-06-27 07:47 38 *******************
- 66 2022-06-27 08:46 40 *********************
- SCT Error Recovery Control command not supported
- Device Statistics (GP Log 0x04)
- Page Offset Size Value Flags Description
- 0x01 ===== = = === == General Statistics (rev 1) ==
- 0x01 0x008 4 29 --- Lifetime Power-On Resets
- 0x01 0x010 4 14611 --- Power-on Hours
- 0x01 0x018 6 74064932584 --- Logical Sectors Written
- 0x01 0x020 6 320671551 --- Number of Write Commands
- 0x01 0x028 6 406867950453 --- Logical Sectors Read
- 0x01 0x030 6 1327536471 --- Number of Read Commands
- 0x01 0x038 6 - --- Date and Time TimeStamp
- 0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
- 0x03 0x008 4 14599 --- Spindle Motor Power-on Hours
- 0x03 0x010 4 13172 --- Head Flying Hours
- 0x03 0x018 4 8325 --- Head Load Events
- 0x03 0x020 4 808 --- Number of Reallocated Logical Sectors
- 0x03 0x028 4 0 --- Read Recovery Attempts
- 0x03 0x030 4 0 --- Number of Mechanical Start Failures
- 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors
- 0x03 0x040 4 250 --- Number of High Priority Unload Events
- 0x04 ===== = = === == General Errors Statistics (rev 1) ==
- 0x04 0x008 4 346 --- Number of Reported Uncorrectable Errors
- 0x04 0x010 4 15 --- Resets Between Cmd Acceptance and Completion
- 0x05 ===== = = === == Temperature Statistics (rev 1) ==
- 0x05 0x008 1 39 --- Current Temperature
- 0x05 0x010 1 36 --- Average Short Term Temperature
- 0x05 0x018 1 35 --- Average Long Term Temperature
- 0x05 0x020 1 43 --- Highest Temperature
- 0x05 0x028 1 0 --- Lowest Temperature
- 0x05 0x030 1 41 --- Highest Average Short Term Temperature
- 0x05 0x038 1 30 --- Lowest Average Short Term Temperature
- 0x05 0x040 1 38 --- Highest Average Long Term Temperature
- 0x05 0x048 1 34 --- Lowest Average Long Term Temperature
- 0x05 0x050 4 0 --- Time in Over-Temperature
- 0x05 0x058 1 60 --- Specified Maximum Operating Temperature
- 0x05 0x060 4 0 --- Time in Under-Temperature
- 0x05 0x068 1 0 --- Specified Minimum Operating Temperature
- 0x06 ===== = = === == Transport Statistics (rev 1) ==
- 0x06 0x008 4 82 --- Number of Hardware Resets
- 0x06 0x010 4 36 --- Number of ASR Events
- 0x06 0x018 4 0 --- Number of Interface CRC Errors
- |||_ C monitored condition met
- ||__ D supports DSN
- |___ N normalized value
- Pending Defects log (GP Log 0x0c)
- No Defects Logged
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
- 0x0001 2 0 Command failed due to ICRC error
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
Advertisement
Add Comment
Please, Sign In to add comment