Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #84 r258178M: Tue Nov 19 00:12:13 EET 2013
    ray@raynote.ddteam.net:/usr/obj/usr/src.newcons/sys/GENERIC amd64
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
WARNING: WITNESS option enabled, expect reduced performance.
info: [drm] Initialized drm 1.1.0 20060810
CPU: Intel(R) Core(TM) i3-2328M CPU @ 2.20GHz (2195.06-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x206a7  Family = 0x6  Model = 0x2a  Stepping = 7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x1dbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 4294967296 (4096 MB)
avail memory = 3868168192 (3688 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TP-H5   >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
random: <Software, Yarrow> initialized
acpi0: <LENOVO TP-H5> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xea000000-0xeaffffff,0xe0000000-0xe7ffffff,0xe8000000-0xe9ffffff irq 16 at device 0.0 on pci1
vgapci1: <VGA-compatible display> port 0x4000-0x403f mem 0xeb000000-0xeb3fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <SandyBridge mobile GT2 IG> on vgapci1
agp0: aperture size is 256M, detected 65532k stolen memory
[drm:pid0:drm_probe] desc : (null)
drmn1: <Intel SandyBridge (M)> on vgapci1
[drm:pid0:drm_attach] MSI count = 1
info: [drm] MSI enabled 1 message(s)
[drm:pid0:drm_load]
[drm:pid0:drm_agp_init] agp_available = 1
info: [drm] AGP at 0xd0000000 256MB
[drm:pid0:drm_ctxbitmap_next] bit : 0
[drm:pid0:drm_ctxbitmap_init] drm_ctxbitmap_init : 0
[drm:pid0:drm_addmap] offset = 0xeb000000, size = 0x00400000, type = 1
[drm:pid0:drm_addmap] Added map 1 0xeb000000/0x400000
[drm:pid0:intel_setup_mchbar] mchbar already enabled
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iic1: <I2C generic I/O> on iicbus1
iicbus2: <Philips I2C bus> on iicbb1 addr 0xff
iic2: <I2C generic I/O> on iicbus2
iic3: <I2C generic I/O> on iicbus3
iicbus4: <Philips I2C bus> on iicbb2 addr 0xff
iic4: <I2C generic I/O> on iicbus4
iic5: <I2C generic I/O> on iicbus5
iicbus6: <Philips I2C bus> on iicbb3 addr 0xff
iic6: <I2C generic I/O> on iicbus6
iic7: <I2C generic I/O> on iicbus7
iicbus8: <Philips I2C bus> on iicbb4 addr 0xff
iic8: <I2C generic I/O> on iicbus8
iic9: <I2C generic I/O> on iicbus9
iicbus10: <Philips I2C bus> on iicbb5 addr 0xff
iic10: <I2C generic I/O> on iicbus10
iic11: <I2C generic I/O> on iicbus11
iicbus12: <Philips I2C bus> on iicbb6 addr 0xff
iic12: <I2C generic I/O> on iicbus12
iic13: <I2C generic I/O> on iicbus13
iicbus14: <Philips I2C bus> on iicbb7 addr 0xff
iic14: <I2C generic I/O> on iicbus14
iic15: <I2C generic I/O> on iicbus15
[drm:pid0:intel_opregion_setup] graphic opregion physical addr: 0xcaf76018
[drm:pid0:intel_opregion_setup] Public ACPI methods supported
[drm:pid0:intel_opregion_setup] SWSCI supported
[drm:pid0:intel_opregion_setup] ASLE supported
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
[drm:KMS:pid0:intel_detect_pch] Found PatherPoint PCH
[drm:KMS:pid0:init_vbt_defaults] Set default to SSC at 100MHz
[drm:KMS:pid0:intel_parse_bios] Using VBT from OpRegion: $VBT SNB/IVB-MOBILE d
[drm:KMS:pid0:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 120 display_clock_mode 0
[drm:KMS:pid0:parse_general_definitions] crt_ddc_bus_pin: 2
[drm:KMS:pid0:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 0 74800 1366 1414 1446 1578 768 770 775 790 0x8 0xa
[drm:KMS:pid0:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[drm:KMS:pid0:parse_sdvo_device_mapping] No SDVO device info is found in VBT
[drm:KMS:pid0:intel_modeset_init] 2 display pipes available.
[drm:pid0:intel_panel_get_backlight] get backlight PWM = 4437
[drm:KMS:pid0:intel_crt_init] pch crt adpa set to 0xf40000
[drm:KMS:pid0:intel_setup_outputs] HDMIB 1 PCH_DP_B 1 HDMIC 0 HDMID 0 PCH_DP_C 0 PCH_DP_D 0 LVDS 1
[drm:KMS:pid0:intel_sdvo_read_byte] i2c transfer returned 2
[drm:KMS:pid0:intel_sdvo_init] No SDVO device found on SDVOB
[drm:KMS:pid0:intel_dp_i2c_init] i2c_init DPDDC-B
[drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid0:intel_dp_i2c_aux_ch] aux_ch failed -60
[drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid0:intel_dp_i2c_aux_ch] aux_ch failed -60
[drm:pid0:intel_panel_actually_set_backlight] set backlight PWM = 0
[drm:KMS:pid0:ironlake_crtc_dpms] crtc 0/0 dpms off
[drm:KMS:pid0:intel_update_fbc]
[drm:KMS:pid0:intel_update_fbc] no output, disabling
[drm:KMS:pid0:ironlake_crtc_dpms] crtc 1/1 dpms off
[drm:pid0:gm45_get_vblank_counter] i915: trying to get vblank count for disabled pipe B
[drm:pid0:gm45_get_vblank_counter] i915: trying to get vblank count for disabled pipe B
[drm:KMS:pid0:intel_update_fbc]
[drm:KMS:pid0:intel_update_fbc] no output, disabling
[drm:KMS:pid0:ironlake_init_pch_refclk] has_panel 1 has_lvds 1 has_pch_edp 0 has_cpu_edp 0 has_ck505 0
[drm:KMS:pid0:ironlake_init_pch_refclk] Using SSC on panel
info: [drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
drmn1: taking over the fictitious range 0xd0000000-0xe0000000
[drm:pid0:init_status_page] i915: init_status_page render ring hws offset: 0x00000000
[drm:pid0:init_status_page] i915: init_status_page gen6 bsd ring hws offset: 0x00022000
[drm:pid0:init_status_page] i915: init_status_page blt ring hws offset: 0x00043000
[drm:pid0:drm_irq_install] irq=264
[drm:pid0:intel_panel_actually_set_backlight] set backlight PWM = 0
[drm:KMS:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:7:LVDS-1]
[drm:KMS:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:7:LVDS-1] probed modes :
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 21:"1366x768" 60 74800 1366 1414 1446 1578 768 770 775 790 0x48 0xa
[drm:KMS:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:13:VGA-1]
[drm:KMS:pid0:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000
[drm:KMS:pid0:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
[drm:KMS:pid0:intel_crt_detect] CRT not detected via hotplug
[drm:KMS:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:13:VGA-1] disconnected
[drm:KMS:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:16:HDMI-A-1]
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 2
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 2
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 2
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 2
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 2
[drm:KMS:pid0:intel_hdmi_detect] [CONNECTOR:16:HDMI-A-1] got no edid, ddc port 5
[drm:KMS:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:16:HDMI-A-1] disconnected
[drm:KMS:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DP-1]
[drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DP-1] disconnected
[drm:KMS:pid0:drm_setup_crtcs]
[drm:KMS:pid0:drm_enable_connectors] connector 7 enabled? yes
[drm:KMS:pid0:drm_enable_connectors] connector 13 enabled? no
[drm:KMS:pid0:drm_enable_connectors] connector 16 enabled? no
[drm:KMS:pid0:drm_enable_connectors] connector 19 enabled? no
[drm:KMS:pid0:drm_target_preferred] looking for cmdline mode on connector 7
[drm:KMS:pid0:drm_target_preferred] looking for preferred mode on connector 7
[drm:KMS:pid0:drm_target_preferred] found mode 1366x768
[drm:KMS:pid0:drm_setup_crtcs] picking CRTCs for 8192x8192 config
[drm:KMS:pid0:drm_setup_crtcs] desired mode 1366x768 set on crtc 3
[drm:KMS:pid0:intelfb_create] allocated 1366x768 (s 24bits) fb: 0x00064000, bo 0xfffff80002afbc00
fbd1 on drmn1
vt_allocate: Replace existing VT driver.
info: [drm] Initialized i915 1.6.0 20080730
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xeb500000-0xeb50ffff irq 21 at device 20.0 on pci0
xhci0: 32 byte context size.
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xeb51a000-0xeb51a3ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac0: <Intel Panther Point HDA Controller> mem 0xeb510000-0xeb513fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xeb404000-0xeb404fff,0xeb400000-0xeb403fff irq 19 at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 3c:97:0e:57:63:49
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xeb519000-0xeb5193ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Panther Point AHCI SATA controller> port 0x4098-0x409f,0x40bc-0x40bf,0x4090-0x4097,0x40b8-0x40bb,0x4060-0x407f mem 0xeb518000-0xeb5187ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Missed a PM interrupt
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,21 and 24,25 on hdaa0
hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0
hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1
pcm1: <Intel Panther Point (HDMI/DP 8ch)> at nid 5 on hdaa1
random: unblocking device.
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 480Mbps High Speed USB v2.0
ACPI Error: No handler for Region [ECRM] (0xfffff80002be5800) [EmbeddedControl] (20130823/evregion-178)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20130823/exfldio-320)
ACPI Error: Method parse/execution failed [\134_TZ_.MDEC] (Node 0xfffff80002b22340), AE_NOT_EXIST (20130823/psparse-553)
ACPI Error: Method parse/execution failed [\134_TZ_.TZS0._SCP] (Node 0xfffff80002b2a2c0), AE_NOT_EXIST (20130823/psparse-553)
ugen2.1: <Intel> at usbus2
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <0x8086> at usbus0
uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[drm:KMS:pid0:drm_crtc_helper_set_config]
[drm:KMS:pid0:drm_crtc_helper_set_config] [CRTC:3] [FB:22] #connectors=1 (x y) (0 0)
[drm:KMS:pid0:drm_crtc_helper_set_config] crtc has no fb, full mode set
[drm:KMS:pid0:drm_crtc_helper_set_config] modes are different, full mode set
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 10:"1366x768" 60 74800 1366 1414 1446 1578 768 770 775 790 0x48 0xa
[drm:KMS:pid0:drm_crtc_helper_set_config] encoder changed, full mode switch
[drm:KMS:pid0:drm_crtc_helper_set_config] crtc changed, full mode switch
[drm:KMS:pid0:drm_crtc_helper_set_config] [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:KMS:pid0:drm_crtc_helper_set_config] attempting to set mode from userspace
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 10:"1366x768" 60 74800 1366 1414 1446 1578 768 770 775 790 0x48 0xa
[drm:KMS:pid0:drm_crtc_helper_set_mode] [CRTC:3]
[drm:pid0:drm_vblank_get] enabling vblank on crtc 0, ret: 22
[drm:KMS:pid0:ironlake_get_refclk] using SSC reference clock of 120 MHz
[drm:KMS:pid0:intel_choose_pipe_bpp_dither] clamping display bpc (was -1) to LVDS (6)
[drm:KMS:pid0:intel_choose_pipe_bpp_dither] setting pipe bpc to 8 (max display bpc 6)
[drm:KMS:pid0:ironlake_crtc_mode_set] Mode for pipe 0:
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 10:"1366x768" 60 74800 1366 1414 1446 1578 768 770 775 790 0x48 0xa
[drm:KMS:pid0:intel_wait_for_vblank] vblank wait timed out
[drm:KMS:pid0:ironlake_update_plane] Writing base 00064000 00000000 0 0 5504
[drm:KMS:pid0:intel_update_fbc]
[drm:KMS:pid0:intel_update_fbc] fbc disabled per module param
[drm:KMS:pid0:sandybridge_update_wm] FIFO watermarks For pipe A - plane 6, cursor: 6
[drm:KMS:pid0:ironlake_check_srwm] watermark 1: display plane 9, fbc lines 3, cursor 6
[drm:KMS:pid0:ironlake_check_srwm] watermark 2: display plane 12, fbc lines 3, cursor 6
[drm:KMS:pid0:ironlake_check_srwm] watermark 3: display plane 54, fbc lines 3, cursor 6
[drm:KMS:pid0:drm_crtc_helper_set_mode] [ENCODER:8:LVDS-8] set [MODE:10:1366x768]
[drm:KMS:pid0:sandybridge_update_wm] FIFO watermarks For pipe A - plane 6, cursor: 6
[drm:KMS:pid0:ironlake_check_srwm] watermark 1: display plane 9, fbc lines 3, cursor 6
[drm:KMS:pid0:ironlake_check_srwm] watermark 2: display plane 12, fbc lines 3, cursor 6
[drm:KMS:pid0:ironlake_check_srwm] watermark 3: display plane 54, fbc lines 3, cursor 6
[drm:KMS:pid0:intel_wait_for_vblank] vblank wait timed out
[drm:KMS:pid0:intel_wait_for_vblank] vblank wait timed out
[drm:KMS:pid0:gen6_fdi_link_train] FDI_RX_IIR 0x700
[drm:KMS:pid0:gen6_fdi_link_train] FDI train 1 done.
[drm:KMS:pid0:gen6_fdi_link_train] FDI_RX_IIR 0x600
[drm:KMS:pid0:gen6_fdi_link_train] FDI train 2 done.
[drm:KMS:pid0:gen6_fdi_link_train] FDI train done.
[drm:KMS:pid0:intel_update_fbc]
[drm:KMS:pid0:intel_update_fbc] fbc disabled per module param
[drm:pid0:intel_panel_actually_set_backlight] set backlight PWM = 4437
[drm:pid0:drm_calc_timestamping_constants] crtc 3: hwmode: htotal 1578, vtotal 790, vdisplay 768
[drm:pid0:drm_calc_timestamping_constants] crtc 3: clock 74800 kHz framedur 16665840 linedur 21096, pixeldur 13
[drm:KMS:pid0:drm_crtc_helper_set_config] Setting connector DPMS state to on
[drm:KMS:pid0:drm_crtc_helper_set_config] 	[CONNECTOR:7:LVDS-1] set DPMS on
[drm:KMS:pid0:drm_crtc_helper_set_config]
[drm:KMS:pid0:drm_crtc_helper_set_config] [CRTC:5] [NOFB]
ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich1 bus 0 scbus0 target 0 lun 0
ada0: <HGST HTS545050A7E380 GG2ZBC80> ATA-8 SATA 2.x device
ada0: Serial Number TE851349C1PPKR
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 1H 63S/T 16383C)
ada0: Previously was known as ad4
cd0 at ahcich4 bus 0 scbus1 target 0 lun 0
cd0: <TSSTcorp CDDVDW SN-208AB LA04> Removable CD-ROM SCSI-0 device
cd0: Serial Number R8KT6GDCA00XEZ
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
[drm:pid12:intel_prepare_page_flip] preparing flip with no unpin work?
Netvsc initializing... SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 1097530544 Hz quality 1000
WARNING: WITNESS option enabled, expect reduced performance.
uhub2: 8 ports with 8 removable, self powered
Root mount waiting for: usbus2 usbus1
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
Root mount waiting for: usbus2 usbus1
ugen2.2: <vendor 0x8087> at usbus2
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
ugen1.2: <vendor 0x8087> at usbus1
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
Root mount waiting for: usbus2 usbus1
uhub4: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
Root mount waiting for: usbus2 usbus1
ugen1.3: <UPEK> at usbus1
ugen2.3: <Generic> at usbus2
umass0: <Generic Flash Card ReaderWriter, class 0/0, rev 2.00/1.00, addr 3> on usbus2
umass0:  SCSI over Bulk-Only; quirks = 0x4001
umass0:3:0: Attached to scbus3
da0 at umass-sim0 bus 0 scbus3 target 0 lun 0
da0: <Multiple Card  Reader 1.00> Removable Direct Access SCSI-0 device
da0: Serial Number 058F63666435
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
ugen1.4: <Ralink> at usbus1
Root mount waiting for: usbus1
ugen1.5: <Vimicro corp.> at usbus1
Trying to mount root from zfs:zroot/HEAD []...
run0: <1.0> on usbus1
run0: MAC/BBP RT3070 (rev 0x0201), RF RT3020 (MIMO 1T1R), address 74:f0:6d:49:e7:c1
run0: firmware RT2870 ver. 0.33 loaded
wlan0: Ethernet address: 3c:97:0e:57:63:49
consolectl: unknown ioctl: t:40007413
sysmouse: unknown ioctl: t:40007413
sysmouse: unknown ioctl: t:40007413
sysmouse: unknown ioctl: t:80007410
sysmouse: unknown ioctl: t:40007413
sysmouse: unknown ioctl: t:40007413
sysmouse: unknown ioctl: t:80007410
KDB: enter: sysctl debug.kdb.enter
sysmouse: unknown ioctl: t:40007413
sysmouse: unknown ioctl: t:40007413
sysmouse: unknown ioctl: t:80007410
KDB: enter: sysctl debug.kdb.enter
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #84 r258178M: Tue Nov 19 00:12:13 EET 2013
    ray@raynote.ddteam.net:/usr/obj/usr/src.newcons/sys/GENERIC amd64
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
WARNING: WITNESS option enabled, expect reduced performance.
info: [drm] Initialized drm 1.1.0 20060810
CPU: Intel(R) Core(TM) i3-2328M CPU @ 2.20GHz (2195.06-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x206a7  Family = 0x6  Model = 0x2a  Stepping = 7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x1dbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 4294967296 (4096 MB)
avail memory = 3868168192 (3688 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TP-H5   >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
random: <Software, Yarrow> initialized
acpi0: <LENOVO TP-H5> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xea000000-0xeaffffff,0xe0000000-0xe7ffffff,0xe8000000-0xe9ffffff irq 16 at device 0.0 on pci1
vgapci1: <VGA-compatible display> port 0x4000-0x403f mem 0xeb000000-0xeb3fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <SandyBridge mobile GT2 IG> on vgapci1
agp0: aperture size is 256M, detected 65532k stolen memory
[drm:pid0:drm_probe] desc : (null)
drmn1: <Intel SandyBridge (M)> on vgapci1
[drm:pid0:drm_attach] MSI count = 1
info: [drm] MSI enabled 1 message(s)
[drm:pid0:drm_load]
[drm:pid0:drm_agp_init] agp_available = 1
info: [drm] AGP at 0xd0000000 256MB
[drm:pid0:drm_ctxbitmap_next] bit : 0
[drm:pid0:drm_ctxbitmap_init] drm_ctxbitmap_init : 0
[drm:pid0:drm_addmap] offset = 0xeb000000, size = 0x00400000, type = 1
[drm:pid0:drm_addmap] Added map 1 0xeb000000/0x400000
[drm:pid0:intel_setup_mchbar] mchbar already enabled
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iic1: <I2C generic I/O> on iicbus1
iicbus2: <Philips I2C bus> on iicbb1 addr 0xff
iic2: <I2C generic I/O> on iicbus2
iic3: <I2C generic I/O> on iicbus3
iicbus4: <Philips I2C bus> on iicbb2 addr 0xff
iic4: <I2C generic I/O> on iicbus4
iic5: <I2C generic I/O> on iicbus5
iicbus6: <Philips I2C bus> on iicbb3 addr 0xff
iic6: <I2C generic I/O> on iicbus6
iic7: <I2C generic I/O> on iicbus7
iicbus8: <Philips I2C bus> on iicbb4 addr 0xff
iic8: <I2C generic I/O> on iicbus8
iic9: <I2C generic I/O> on iicbus9
iicbus10: <Philips I2C bus> on iicbb5 addr 0xff
iic10: <I2C generic I/O> on iicbus10
iic11: <I2C generic I/O> on iicbus11
iicbus12: <Philips I2C bus> on iicbb6 addr 0xff
iic12: <I2C generic I/O> on iicbus12
iic13: <I2C generic I/O> on iicbus13
iicbus14: <Philips I2C bus> on iicbb7 addr 0xff
iic14: <I2C generic I/O> on iicbus14
iic15: <I2C generic I/O> on iicbus15
[drm:pid0:intel_opregion_setup] graphic opregion physical addr: 0xcaf76018
[drm:pid0:intel_opregion_setup] Public ACPI methods supported
[drm:pid0:intel_opregion_setup] SWSCI supported
[drm:pid0:intel_opregion_setup] ASLE supported
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
[drm:KMS:pid0:intel_detect_pch] Found PatherPoint PCH
[drm:KMS:pid0:init_vbt_defaults] Set default to SSC at 100MHz
[drm:KMS:pid0:intel_parse_bios] Using VBT from OpRegion: $VBT SNB/IVB-MOBILE d
[drm:KMS:pid0:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 120 display_clock_mode 0
[drm:KMS:pid0:parse_general_definitions] crt_ddc_bus_pin: 2
[drm:KMS:pid0:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 0 74800 1366 1414 1446 1578 768 770 775 790 0x8 0xa
[drm:KMS:pid0:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[drm:KMS:pid0:parse_sdvo_device_mapping] No SDVO device info is found in VBT
[drm:KMS:pid0:intel_modeset_init] 2 display pipes available.
[drm:pid0:intel_panel_get_backlight] get backlight PWM = 4437
[drm:KMS:pid0:intel_crt_init] pch crt adpa set to 0xf40000
[drm:KMS:pid0:intel_setup_outputs] HDMIB 1 PCH_DP_B 1 HDMIC 0 HDMID 0 PCH_DP_C 0 PCH_DP_D 0 LVDS 1
[drm:KMS:pid0:intel_sdvo_read_byte] i2c transfer returned 2
[drm:KMS:pid0:intel_sdvo_init] No SDVO device found on SDVOB
[drm:KMS:pid0:intel_dp_i2c_init] i2c_init DPDDC-B
[drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid0:intel_dp_i2c_aux_ch] aux_ch failed -60
[drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid0:intel_dp_i2c_aux_ch] aux_ch failed -60
[drm:pid0:intel_panel_actually_set_backlight] set backlight PWM = 0
[drm:KMS:pid0:ironlake_crtc_dpms] crtc 0/0 dpms off
[drm:KMS:pid0:intel_update_fbc]
[drm:KMS:pid0:intel_update_fbc] no output, disabling
[drm:KMS:pid0:ironlake_crtc_dpms] crtc 1/1 dpms off
[drm:pid0:gm45_get_vblank_counter] i915: trying to get vblank count for disabled pipe B
[drm:pid0:gm45_get_vblank_counter] i915: trying to get vblank count for disabled pipe B
[drm:KMS:pid0:intel_update_fbc]
[drm:KMS:pid0:intel_update_fbc] no output, disabling
[drm:KMS:pid0:ironlake_init_pch_refclk] has_panel 1 has_lvds 1 has_pch_edp 0 has_cpu_edp 0 has_ck505 0
[drm:KMS:pid0:ironlake_init_pch_refclk] Using SSC on panel
info: [drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
drmn1: taking over the fictitious range 0xd0000000-0xe0000000
[drm:pid0:init_status_page] i915: init_status_page render ring hws offset: 0x00000000
[drm:pid0:init_status_page] i915: init_status_page gen6 bsd ring hws offset: 0x00022000
[drm:pid0:init_status_page] i915: init_status_page blt ring hws offset: 0x00043000
[drm:pid0:drm_irq_install] irq=264
[drm:pid0:intel_panel_actually_set_backlight] set backlight PWM = 0
[drm:KMS:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:7:LVDS-1]
[drm:KMS:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:7:LVDS-1] probed modes :
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 21:"1366x768" 60 74800 1366 1414 1446 1578 768 770 775 790 0x48 0xa
[drm:KMS:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:13:VGA-1]
[drm:KMS:pid0:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000
[drm:KMS:pid0:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
[drm:KMS:pid0:intel_crt_detect] CRT not detected via hotplug
[drm:KMS:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:13:VGA-1] disconnected
[drm:KMS:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:16:HDMI-A-1]
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 2
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 2
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 2
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 2
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 2
[drm:KMS:pid0:intel_hdmi_detect] [CONNECTOR:16:HDMI-A-1] got no edid, ddc port 5
[drm:KMS:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:16:HDMI-A-1] disconnected
[drm:KMS:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DP-1]
[drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DP-1] disconnected
[drm:KMS:pid0:drm_setup_crtcs]
[drm:KMS:pid0:drm_enable_connectors] connector 7 enabled? yes
[drm:KMS:pid0:drm_enable_connectors] connector 13 enabled? no
[drm:KMS:pid0:drm_enable_connectors] connector 16 enabled? no
[drm:KMS:pid0:drm_enable_connectors] connector 19 enabled? no
[drm:KMS:pid0:drm_target_preferred] looking for cmdline mode on connector 7
[drm:KMS:pid0:drm_target_preferred] looking for preferred mode on connector 7
[drm:KMS:pid0:drm_target_preferred] found mode 1366x768
[drm:KMS:pid0:drm_setup_crtcs] picking CRTCs for 8192x8192 config
[drm:KMS:pid0:drm_setup_crtcs] desired mode 1366x768 set on crtc 3
[drm:KMS:pid0:intelfb_create] allocated 1366x768 (s 24bits) fb: 0x00064000, bo 0xfffff80002afbc00
fbd1 on drmn1
vt_allocate: Replace existing VT driver.
info: [drm] Initialized i915 1.6.0 20080730
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xeb500000-0xeb50ffff irq 21 at device 20.0 on pci0
xhci0: 32 byte context size.
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xeb51a000-0xeb51a3ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac0: <Intel Panther Point HDA Controller> mem 0xeb510000-0xeb513fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xeb404000-0xeb404fff,0xeb400000-0xeb403fff irq 19 at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 3c:97:0e:57:63:49
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xeb519000-0xeb5193ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Panther Point AHCI SATA controller> port 0x4098-0x409f,0x40bc-0x40bf,0x4090-0x4097,0x40b8-0x40bb,0x4060-0x407f mem 0xeb518000-0xeb5187ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Missed a PM interrupt
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,21 and 24,25 on hdaa0
hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0
hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1
pcm1: <Intel Panther Point (HDMI/DP 8ch)> at nid 5 on hdaa1
random: unblocking device.
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 480Mbps High Speed USB v2.0
ACPI Error: No handler for Region [ECRM] (0xfffff80002be5800) [EmbeddedControl] (20130823/evregion-178)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20130823/exfldio-320)
ACPI Error: Method parse/execution failed [\134_TZ_.MDEC] (Node 0xfffff80002b22340), AE_NOT_EXIST (20130823/psparse-553)
ACPI Error: Method parse/execution failed [\134_TZ_.TZS0._SCP] (Node 0xfffff80002b2a2c0), AE_NOT_EXIST (20130823/psparse-553)
ugen2.1: <Intel> at usbus2
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <0x8086> at usbus0
uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[drm:KMS:pid0:drm_crtc_helper_set_config]
[drm:KMS:pid0:drm_crtc_helper_set_config] [CRTC:3] [FB:22] #connectors=1 (x y) (0 0)
[drm:KMS:pid0:drm_crtc_helper_set_config] crtc has no fb, full mode set
[drm:KMS:pid0:drm_crtc_helper_set_config] modes are different, full mode set
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 10:"1366x768" 60 74800 1366 1414 1446 1578 768 770 775 790 0x48 0xa
[drm:KMS:pid0:drm_crtc_helper_set_config] encoder changed, full mode switch
[drm:KMS:pid0:drm_crtc_helper_set_config] crtc changed, full mode switch
[drm:KMS:pid0:drm_crtc_helper_set_config] [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:KMS:pid0:drm_crtc_helper_set_config] attempting to set mode from userspace
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 10:"1366x768" 60 74800 1366 1414 1446 1578 768 770 775 790 0x48 0xa
[drm:KMS:pid0:drm_crtc_helper_set_mode] [CRTC:3]
[drm:pid0:drm_vblank_get] enabling vblank on crtc 0, ret: 22
[drm:KMS:pid0:ironlake_get_refclk] using SSC reference clock of 120 MHz
[drm:KMS:pid0:intel_choose_pipe_bpp_dither] clamping display bpc (was -1) to LVDS (6)
[drm:KMS:pid0:intel_choose_pipe_bpp_dither] setting pipe bpc to 8 (max display bpc 6)
[drm:KMS:pid0:ironlake_crtc_mode_set] Mode for pipe 0:
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 10:"1366x768" 60 74800 1366 1414 1446 1578 768 770 775 790 0x48 0xa
[drm:KMS:pid0:intel_wait_for_vblank] vblank wait timed out
[drm:KMS:pid0:ironlake_update_plane] Writing base 00064000 00000000 0 0 5504
[drm:KMS:pid0:intel_update_fbc]
[drm:KMS:pid0:intel_update_fbc] fbc disabled per module param
[drm:KMS:pid0:sandybridge_update_wm] FIFO watermarks For pipe A - plane 6, cursor: 6
[drm:KMS:pid0:ironlake_check_srwm] watermark 1: display plane 9, fbc lines 3, cursor 6
[drm:KMS:pid0:ironlake_check_srwm] watermark 2: display plane 12, fbc lines 3, cursor 6
[drm:KMS:pid0:ironlake_check_srwm] watermark 3: display plane 54, fbc lines 3, cursor 6
[drm:KMS:pid0:drm_crtc_helper_set_mode] [ENCODER:8:LVDS-8] set [MODE:10:1366x768]
[drm:KMS:pid0:sandybridge_update_wm] FIFO watermarks For pipe A - plane 6, cursor: 6
[drm:KMS:pid0:ironlake_check_srwm] watermark 1: display plane 9, fbc lines 3, cursor 6
[drm:KMS:pid0:ironlake_check_srwm] watermark 2: display plane 12, fbc lines 3, cursor 6
[drm:KMS:pid0:ironlake_check_srwm] watermark 3: display plane 54, fbc lines 3, cursor 6
[drm:KMS:pid0:intel_wait_for_vblank] vblank wait timed out
[drm:KMS:pid0:intel_wait_for_vblank] vblank wait timed out
[drm:KMS:pid0:gen6_fdi_link_train] FDI_RX_IIR 0x700
[drm:KMS:pid0:gen6_fdi_link_train] FDI train 1 done.
[drm:KMS:pid0:gen6_fdi_link_train] FDI_RX_IIR 0x600
[drm:KMS:pid0:gen6_fdi_link_train] FDI train 2 done.
[drm:KMS:pid0:gen6_fdi_link_train] FDI train done.
[drm:KMS:pid0:intel_update_fbc]
[drm:KMS:pid0:intel_update_fbc] fbc disabled per module param
[drm:pid0:intel_panel_actually_set_backlight] set backlight PWM = 4437
[drm:pid0:drm_calc_timestamping_constants] crtc 3: hwmode: htotal 1578, vtotal 790, vdisplay 768
[drm:pid0:drm_calc_timestamping_constants] crtc 3: clock 74800 kHz framedur 16665840 linedur 21096, pixeldur 13
[drm:KMS:pid0:drm_crtc_helper_set_config] Setting connector DPMS state to on
[drm:KMS:pid0:drm_crtc_helper_set_config] 	[CONNECTOR:7:LVDS-1] set DPMS on
[drm:KMS:pid0:drm_crtc_helper_set_config]
[drm:KMS:pid0:drm_crtc_helper_set_config] [CRTC:5] [NOFB]
ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich1 bus 0 scbus0 target 0 lun 0
ada0: <HGST HTS545050A7E380 GG2ZBC80> ATA-8 SATA 2.x device
ada0: Serial Number TE851349C1PPKR
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 1H 63S/T 16383C)
ada0: Previously was known as ad4
cd0 at ahcich4 bus 0 scbus1 target 0 lun 0
cd0: <TSSTcorp CDDVDW SN-208AB LA04> Removable CD-ROM SCSI-0 device
cd0: Serial Number R8KT6GDCA00XEZ
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
[drm:pid12:intel_prepare_page_flip] preparing flip with no unpin work?
Netvsc initializing... SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 1097529042 Hz quality 1000
WARNING: WITNESS option enabled, expect reduced performance.
uhub2: 8 ports with 8 removable, self powered
Root mount waiting for: usbus2 usbus1
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
Root mount waiting for: usbus2 usbus1
ugen2.2: <vendor 0x8087> at usbus2
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
ugen1.2: <vendor 0x8087> at usbus1
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
Root mount waiting for: usbus2 usbus1
uhub4: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
Root mount waiting for: usbus2 usbus1
ugen1.3: <UPEK> at usbus1
ugen2.3: <Generic> at usbus2
umass0: <Generic Flash Card ReaderWriter, class 0/0, rev 2.00/1.00, addr 3> on usbus2
umass0:  SCSI over Bulk-Only; quirks = 0x4001
umass0:3:0: Attached to scbus3
da0 at umass-sim0 bus 0 scbus3 target 0 lun 0
da0: <Multiple Card  Reader 1.00> Removable Direct Access SCSI-0 device
da0: Serial Number 058F63666435
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
ugen1.4: <Ralink> at usbus1
ugen1.5: <Vimicro corp.> at usbus1
Root mount waiting for: usbus1
Trying to mount root from zfs:zroot/HEAD []...
run0: <1.0> on usbus1
run0: MAC/BBP RT3070 (rev 0x0201), RF RT3020 (MIMO 1T1R), address 74:f0:6d:49:e7:c1
run0: firmware RT2870 ver. 0.33 loaded
wlan0: Ethernet address: 3c:97:0e:57:63:49
wlan0: ieee80211_new_state_locked: pending ASSOC -> RUN transition lost
pid 1102 (fstat), uid 0: exited on signal 11 (core dumped)
consolectl: unknown ioctl: t:40007413
wlan0: link state changed to DOWN
wlan0: link state changed to UP
sysmouse: unknown ioctl: t:40007413
sysmouse: unknown ioctl: t:40007413
sysmouse: unknown ioctl: t:80007410
pid 2435 (perl5.14.4), uid 0: exited on signal 6 (core dumped)
pid 2437 (perl5.14.4), uid 0: exited on signal 6 (core dumped)
wlan0: link state changed to DOWN
wlan0: ieee80211_new_state_locked: pending ASSOC -> RUN transition lost
wlan0: link state changed to UP
wlan0: link state changed to DOWN
wlan0: link state changed to UP
wlan0: link state changed to DOWN
wlan0: link state changed to UP
wlan0: link state changed to DOWN
wlan0: link state changed to UP
sysmouse: unknown ioctl: t:40007413
sysmouse: unknown ioctl: t:40007413
sysmouse: unknown ioctl: t:80007410
sysmouse: unknown ioctl: t:40007413
sysmouse: unknown ioctl: t:40007413
sysmouse: unknown ioctl: t:80007410
sysmouse: unknown ioctl: t:40007413
sysmouse: unknown ioctl: t:40007413
sysmouse: unknown ioctl: t:80007410
pid 5254 (seamonkey), uid 1001, was killed: out of swap space
pid 6319 (pastebincl), uid 0, was killed: out of swap space
pid 6329 (pastebincl), uid 0, was killed: out of swap space
pid 6377 (pastebincl), uid 0, was killed: out of swap space