API tools faq
paste
Advertisement
chadbyoung

120205_odroid-pc_sata_boot_fail

chadbyoung
Feb 5th, 2013
64
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 28.49 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 2010.12 (Feb 05 2013 - 09:36:35) for EXYNOS4210
  2.  
  3.  
  4. CPU: S5PC210 [Samsung SOC on SMP Platform Base on ARM CortexA9]
  5. APLL = 1000MHz, MPLL = 800MHz
  6. EVT1 POP_B
  7. DRAM: 1 GiB
  8.  
  9.  
  10. Checking Boot Mode ... SDMMC
  11. MMC Device 0: 7596 MB
  12. MMC Device 1 not found
  13. *** Warning - using default environment
  14.  
  15. Net: No ethernet found.
  16. Hit any key to stop autoboot: 0
  17. reading kernel..device 0 Start 1409, Count 16384
  18. MMC read: dev # 0, block # 1409, count 16384 ... 16384 blocks read: OK
  19. completed
  20. reading RFS..device 0 Count 17793, Start 2048
  21. MMC read: dev # 0, block # 17793, count 2048 ... 2048 blocks read: OK
  22. completed
  23. Boot with zImage
  24. ## Loading init Ramdisk from Legacy Image at 41000000 ...
  25. Image Name: ramdisk
  26. Image Type: ARM Linux RAMDisk Image (uncompressed)
  27. Data Size: 330878 Bytes = 323.1 KiB
  28. Load Address: 40800000
  29. Entry Point: 40800000
  30.  
  31. Starting kernel ...
  32.  
  33. Uncompressing Linux... done, booting the kernel.
  34. [ 0.000000] Booting Linux on physical CPU 0
  35. [ 0.000000] Linux version 3.4.0-rc3+ (youngc@devboard) (gcc version 4.7.2 (Ubuntu/Linaro 4.3
  36. [ 0.000000] CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c53c7d
  37. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  38. [ 0.000000] Machine: ODROIDPC
  39. [ 0.000000] INITRD: 0x20800000+0x00800000 is not a memory region - disabling initrd
  40. [ 0.000000] cma: CMA: reserved 8 MiB at 43000000
  41. [ 0.000000] cma: CMA: reserved 8 MiB at 51000000
  42. [ 0.000000] cma: CMA: reserved 16 MiB at 7f000000
  43. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  44. [ 0.000000] CPU EXYNOS4210 (id 0x43210211)
  45. [ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
  46. [ 0.000000] s3c_register_clksrc: clock armclk has no registers set
  47. [ 0.000000] EXYNOS4: PLL settings, A=1000000000, M=800000000, E=180000000 V=108000000
  48. [ 0.000000] EXYNOS4: ARMCLK=1000000000, DMC=400000000, ACLK200=200000000
  49. [ 0.000000] ACLK100=100000000, ACLK160=160000000, ACLK133=133333333
  50. [ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
  51. [ 0.000000] sclk_csis: source is xusbxti (1), rate is 0
  52. [ 0.000000] sclk_csis: source is xusbxti (1), rate is 0
  53. [ 0.000000] sclk_cam0: source is xusbxti (1), rate is 0
  54. [ 0.000000] sclk_cam1: source is xusbxti (1), rate is 0
  55. [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 0
  56. [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 0
  57. [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 0
  58. [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 0
  59. [ 0.000000] sclk_fimd: source is xusbxti (1), rate is 0
  60. [ 0.000000] sclk_fimg2d: source is mout_g2d0 (0), rate is 0
  61. [ 0.000000] sclk_mfc: source is mout_mfc0 (0), rate is 100000000
  62. [ 0.000000] sclk_pwi: source is xusbxti (1), rate is 0
  63. [ 0.000000] PERCPU: Embedded 8 pages/cpu @8116b000 s12160 r8192 d12416 u32768
  64. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
  65. [ 0.000000] Kernel command line: root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M consolc
  66. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  67. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  68. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  69. [ 0.000000] Memory: 1024MB = 1024MB total
  70. [ 0.000000] Memory: 997008k/997008k available, 51568k reserved, 0K highmem
  71. [ 0.000000] Virtual kernel memory layout:
  72. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  73. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  74. [ 0.000000] vmalloc : 0xc0800000 - 0xff000000 (1000 MB)
  75. [ 0.000000] lowmem : 0x80000000 - 0xc0000000 (1024 MB)
  76. [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
  77. [ 0.000000] .text : 0x80008000 - 0x8082be7c (8336 kB)
  78. [ 0.000000] .init : 0x8082c000 - 0x8087af80 ( 316 kB)
  79. [ 0.000000] .data : 0x8087c000 - 0x808e8590 ( 434 kB)
  80. [ 0.000000] .bss : 0x808e85b4 - 0x809603d8 ( 480 kB)
  81. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  82. [ 0.000000] Preemptible hierarchical RCU implementation.
  83. [ 0.000000] NR_IRQS:549
  84. [ 0.000000] sched_clock: 32 bits at 200 Hz, resolution 5000000ns, wraps every 4294967291ms
  85. [ 0.000000] Console: colour dummy device 80x30
  86. [ 0.000000] Calibrating delay loop... 1992.29 BogoMIPS (lpj=4980736)
  87. [ 0.045000] pid_max: default: 32768 minimum: 301
  88. [ 0.045000] Security Framework initialized
  89. [ 0.045000] AppArmor: AppArmor initialized
  90. [ 0.045000] Mount-cache hash table entries: 512
  91. [ 0.045000] CPU: Testing write buffer coherency: ok
  92. [ 0.045000] ftrace: allocating 23267 entries in 69 pages
  93. [ 0.075000] CPU0: thread -1, cpu 0, socket 9, mpidr 80000900
  94. [ 0.075000] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  95. [ 0.075000] Setting up static identity map for 0x405d2f08 - 0x405d2f60
  96. [ 0.075000] L310 cache controller enabled
  97. [ 0.075000] l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache size: 1048576 B
  98. [ 0.105000] CPU1: Booted secondary processor
  99. [ 0.125000] CPU1: thread -1, cpu 1, socket 9, mpidr 80000901
  100. [ 0.125000] CPU1: Unknown IPI message 0x1
  101. [ 0.125000] Brought up 2 CPUs
  102. [ 0.125000] SMP: Total of 2 processors activated (3984.58 BogoMIPS).
  103. [ 0.125000] devtmpfs: initialized
  104. [ 0.130000] gpiochip_add: registered GPIOs 0 to 7 on device: GPA0
  105. [ 0.130000] gpiochip_add: registered GPIOs 9 to 14 on device: GPA1
  106. [ 0.130000] gpiochip_add: registered GPIOs 16 to 23 on device: GPB
  107. [ 0.130000] gpiochip_add: registered GPIOs 25 to 29 on device: GPC0
  108. [ 0.130000] gpiochip_add: registered GPIOs 31 to 35 on device: GPC1
  109. [ 0.130000] gpiochip_add: registered GPIOs 37 to 40 on device: GPD0
  110. [ 0.130000] gpiochip_add: registered GPIOs 42 to 45 on device: GPD1
  111. [ 0.130000] gpiochip_add: registered GPIOs 47 to 51 on device: GPE0
  112. [ 0.130000] gpiochip_add: registered GPIOs 53 to 60 on device: GPE1
  113. [ 0.130000] gpiochip_add: registered GPIOs 62 to 67 on device: GPE2
  114. [ 0.130000] gpiochip_add: registered GPIOs 69 to 76 on device: GPE3
  115. [ 0.130000] gpiochip_add: registered GPIOs 78 to 85 on device: GPE4
  116. [ 0.130000] gpiochip_add: registered GPIOs 87 to 94 on device: GPF0
  117. [ 0.130000] gpiochip_add: registered GPIOs 96 to 103 on device: GPF1
  118. [ 0.130000] gpiochip_add: registered GPIOs 105 to 112 on device: GPF2
  119. [ 0.130000] gpiochip_add: registered GPIOs 114 to 119 on device: GPF3
  120. [ 0.130000] gpiochip_add: registered GPIOs 121 to 128 on device: GPJ0
  121. [ 0.130000] gpiochip_add: registered GPIOs 130 to 134 on device: GPJ1
  122. [ 0.130000] gpiochip_add: registered GPIOs 136 to 142 on device: GPK0
  123. [ 0.130000] gpiochip_add: registered GPIOs 144 to 150 on device: GPK1
  124. [ 0.130000] gpiochip_add: registered GPIOs 152 to 158 on device: GPK2
  125. [ 0.130000] gpiochip_add: registered GPIOs 160 to 166 on device: GPK3
  126. [ 0.130000] gpiochip_add: registered GPIOs 168 to 175 on device: GPL0
  127. [ 0.130000] gpiochip_add: registered GPIOs 177 to 179 on device: GPL1
  128. [ 0.130000] gpiochip_add: registered GPIOs 181 to 188 on device: GPL2
  129. [ 0.130000] gpiochip_add: registered GPIOs 226 to 231 on device: GPY0
  130. [ 0.130000] gpiochip_add: registered GPIOs 233 to 236 on device: GPY1
  131. [ 0.130000] gpiochip_add: registered GPIOs 238 to 243 on device: GPY2
  132. [ 0.130000] gpiochip_add: registered GPIOs 245 to 252 on device: GPY3
  133. [ 0.130000] gpiochip_add: registered GPIOs 254 to 261 on device: GPY4
  134. [ 0.130000] gpiochip_add: registered GPIOs 263 to 270 on device: GPY5
  135. [ 0.130000] gpiochip_add: registered GPIOs 272 to 279 on device: GPY6
  136. [ 0.130000] gpiochip_add: registered GPIOs 190 to 197 on device: GPX0
  137. [ 0.130000] gpiochip_add: registered GPIOs 199 to 206 on device: GPX1
  138. [ 0.130000] gpiochip_add: registered GPIOs 208 to 215 on device: GPX2
  139. [ 0.130000] gpiochip_add: registered GPIOs 217 to 224 on device: GPX3
  140. [ 0.130000] gpiochip_add: registered GPIOs 281 to 287 on device: GPZ
  141. [ 0.130000] dummy:
  142. [ 0.135000] NET: Registered protocol family 16
  143. [ 0.145000] DMA: preallocated 256 KiB pool for atomic coherent allocations
  144. [ 0.150000] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  145. [ 0.150000] hw-breakpoint: maximum watchpoint size is 4 bytes.
  146. [ 0.150000] S3C Power Management, Copyright 2004 Simtec Electronics
  147. [ 0.150000] EXYNOS4210 PMU Initialize
  148. [ 0.155000] EXYNOS: Initializing architecture
  149. [ 0.155000] s3c24xx-pwm s3c24xx-pwm.0: tin at 100000000, tdiv at 100000000, tin=divclk, bas0
  150. [ 0.185000] bio: create slab <bio-0> at 0
  151. [ 0.185000] SCSI subsystem initialized
  152. [ 0.185000] usbcore: registered new interface driver usbfs
  153. [ 0.185000] usbcore: registered new interface driver hub
  154. [ 0.185000] usbcore: registered new device driver usb
  155. [ 0.185000] s3c-i2c s3c2440-i2c.0: slave address 0x10
  156. [ 0.185000] s3c-i2c s3c2440-i2c.0: bus frequency set to 97 KHz
  157. [ 0.235000] VDD_ABB_3.3V: 3300 mV
  158. [ 0.240000] VDD_ALIVE_1.1V: 1100 mV
  159. [ 0.240000] VMIPI_1.1V: 1100 mV
  160. [ 0.245000] VDD_RTC_1.8V: 1800 mV
  161. [ 0.245000] VMIPI_1.8V: 1800 mV
  162. [ 0.250000] VDD_AUD_1.8V: 1800 mV
  163. [ 0.250000] VADC_3.3V: 3300 mV
  164. [ 0.255000] DVDD_SWB_2.8V: 2800 mV
  165. [ 0.255000] VDD_PLL_1.1V: 1100 mV
  166. [ 0.260000] VDD_AUD_3V: 3000 mV
  167. [ 0.260000] AVDD18_SWB_1.8V: 1800 mV
  168. [ 0.265000] VDD_SWB_3.3V: 3300 mV
  169. [ 0.265000] VDD_MIF_1.2V: 1200 mV
  170. [ 0.265000] VDD_ARM_1.2V: 925 <--> 1350 mV at 1350 mV
  171. [ 0.270000] VDD_INT_1.1V: 900 <--> 1100 mV at 1100 mV
  172. [ 0.270000] VDD_G3D_1.1V: 900 <--> 1100 mV at 1100 mV
  173. [ 0.275000] VDDQ_M1M2_1.2V: 1200 mV
  174. [ 0.275000] VDD_IO_1.8V: 1800 <--> 1950 mV at 2000 mV
  175. [ 0.275000] VDD_IO_1.8V: Voltage range but no REGULATOR_CHANGE_VOLTAGE
  176. [ 0.275000] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
  177. [ 0.275000] s3c-i2c s3c2440-i2c.1: slave address 0x10
  178. [ 0.275000] s3c-i2c s3c2440-i2c.1: bus frequency set to 97 KHz
  179. [ 0.275000] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
  180. [ 0.275000] s3c-i2c s3c2440-hdmiphy-i2c: slave address 0x10
  181. [ 0.275000] s3c-i2c s3c2440-hdmiphy-i2c: bus frequency set to 97 KHz
  182. [ 0.275000] s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter
  183. [ 0.275000] Linux media interface: v0.10
  184. [ 0.280000] Linux video capture interface: v2.00
  185. [ 0.280000] Advanced Linux Sound Architecture Driver Version 1.0.25.
  186. [ 0.280000] Bluetooth: Core ver 2.16
  187. [ 0.280000] NET: Registered protocol family 31
  188. [ 0.280000] Bluetooth: HCI device and connection manager initialized
  189. [ 0.280000] Bluetooth: HCI socket layer initialized
  190. [ 0.280000] Bluetooth: L2CAP socket layer initialized
  191. [ 0.280000] Bluetooth: SCO socket layer initialized
  192. [ 0.285000] cfg80211: Calling CRDA to update world regulatory domain
  193. [ 0.285000] NetLabel: Initializing
  194. [ 0.285000] NetLabel: domain hash size = 128
  195. [ 0.285000] NetLabel: protocols = UNLABELED CIPSOv4
  196. [ 0.285000] NetLabel: unlabeled traffic allowed by default
  197. [ 0.285000] Switching to clocksource mct-frc
  198. [ 0.300000] AppArmor: AppArmor Filesystem Enabled
  199. [ 0.320000] NET: Registered protocol family 2
  200. [ 0.320000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  201. [ 0.320000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  202. [ 0.320000] TCP bind hash table entries: 65536 (order: 8, 1572864 bytes)
  203. [ 0.325000] TCP: Hash tables configured (established 131072 bind 65536)
  204. [ 0.325000] TCP: reno registered
  205. [ 0.325000] UDP hash table entries: 512 (order: 3, 32768 bytes)
  206. [ 0.325000] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes)
  207. [ 0.325000] NET: Registered protocol family 1
  208. [ 0.325000] RPC: Registered named UNIX socket transport module.
  209. [ 0.325000] RPC: Registered udp transport module.
  210. [ 0.325000] RPC: Registered tcp transport module.
  211. [ 0.325000] RPC: Registered tcp NFSv4.1 backchannel transport module.
  212. [ 0.325000] audit: initializing netlink socket (disabled)
  213. [ 0.325000] type=2000 audit(0.325:1): initialized
  214. [ 0.405000] NFS: Registering the id_resolver key type
  215. [ 0.405000] ROMFS MTD (C) 2007 Red Hat, Inc.
  216. [ 0.410000] Btrfs loaded
  217. [ 0.410000] msgmni has been set to 2011
  218. [ 0.410000] io scheduler noop registered
  219. [ 0.410000] io scheduler deadline registered
  220. [ 0.410000] io scheduler cfq registered (default)
  221. [ 0.410000] start plist test
  222. [ 0.420000] end plist test
  223. [ 0.420000] s3c-fb exynos4-fb.0: start latency exceeded, new value 791 ns
  224. [ 0.420000] s3c-fb exynos4-fb.0: state restore latency exceeded, new value 39917 ns
  225. [ 0.420000] s3c-fb exynos4-fb.0: stop latency exceeded, new value 625 ns
  226. [ 0.445000] Console: switching to colour frame buffer device 128x37
  227. [ 0.450000] s3c-fb exynos4-fb.0: window 0: fb
  228. [ 0.455000] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
  229. [ 0.460000] dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  230. [ 0.465000] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
  231. [ 0.465000] dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  232. [ 0.465000] dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-267056
  233. [ 0.465000] dma-pl330 dma-pl330.2: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
  234. [ 0.590000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  235. [ 0.590000] exynos4210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 84) is a S3C6400/10
  236. [ 0.590000] exynos4210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 85) is a S3C6400/10
  237. [ 1.710000] console [ttySAC1] enabled
  238. [ 1.715000] exynos4210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 86) is a S3C6400/10
  239. [ 1.725000] exynos4210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 87) is a S3C6400/10
  240. [ 1.730000] [drm] Initialized drm 1.1.0 20060810
  241. [ 1.735000] Mali: Mali device driver loaded
  242. [ 1.740000] UMP: UMP device driver loaded
  243. [ 1.755000] brd: module loaded
  244. [ 1.755000] ahci ahci: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  245. [ 1.760000] ahci ahci: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
  246. [ 1.770000] scsi0 : ahci_platform
  247. [ 1.770000] ata1: SATA max UDMA/133 mmio [mem 0x12560000-0x1256ffff] port 0x100 irq 148
  248. [ 1.780000] usbcore: registered new interface driver catc
  249. [ 1.785000] usbcore: registered new interface driver kaweth
  250. [ 1.790000] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
  251. [ 1.795000] usbcore: registered new interface driver pegasus
  252. [ 1.800000] usbcore: registered new interface driver rtl8150
  253. [ 1.805000] usbcore: registered new interface driver asix
  254. [ 1.815000] usbcore: registered new interface driver dm9601
  255. [ 1.820000] usbcore: registered new interface driver smsc75xx
  256. [ 1.825000] usbcore: registered new interface driver smsc95xx
  257. [ 1.830000] usbcore: registered new interface driver net1080
  258. [ 1.835000] usbcore: registered new interface driver plusb
  259. [ 1.840000] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  260. [ 1.850000] usbcore: registered new interface driver int51x1
  261. [ 1.855000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  262. [ 1.860000] s5p-ehci s5p-ehci: S5P EHCI Host Controller
  263. [ 1.865000] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
  264. [ 1.875000] s5p-ehci s5p-ehci: irq 102, io mem 0x12580000
  265. [ 1.890000] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
  266. [ 1.890000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  267. [ 1.895000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  268. [ 1.900000] usb usb1: Product: S5P EHCI Host Controller
  269. [ 1.905000] usb usb1: Manufacturer: Linux 3.4.0-rc3+ ehci_hcd
  270. [ 1.910000] usb usb1: SerialNumber: s5p-ehci
  271. [ 1.915000] hub 1-0:1.0: USB hub found
  272. [ 1.920000] hub 1-0:1.0: 3 ports detected
  273. [ 1.925000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  274. [ 1.930000] exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller
  275. [ 1.935000] exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2
  276. [ 1.945000] exynos-ohci exynos-ohci: irq 102, io mem 0x12590000
  277. [ 2.005000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  278. [ 2.010000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  279. [ 2.015000] usb usb2: Product: EXYNOS OHCI Host Controller
  280. [ 2.020000] usb usb2: Manufacturer: Linux 3.4.0-rc3+ ohci_hcd
  281. [ 2.025000] usb usb2: SerialNumber: exynos-ohci
  282. [ 2.030000] hub 2-0:1.0: USB hub found
  283. [ 2.035000] hub 2-0:1.0: 3 ports detected
  284. [ 2.040000] mousedev: PS/2 mouse device common for all mice
  285. [ 2.045000] i2c /dev entries driver
  286. [ 2.050000] usbcore: registered new interface driver sn9c102
  287. [ 2.055000] usbcore: registered new interface driver et61x251
  288. [ 2.060000] s5p-fimc exynos4-fimc.0: start latency exceeded, new value 1041 ns
  289. [ 2.065000] s5p-fimc exynos4-fimc.0: state restore latency exceeded, new value 17125 ns
  290. [ 2.075000] s5p-fimc exynos4-fimc.0: stop latency exceeded, new value 666 ns
  291. [ 2.080000] s5p-fimc exynos4-fimc.0: state save latency exceeded, new value 3167 ns
  292. [ 2.090000] s5p-fimc exynos4-fimc.1: start latency exceeded, new value 625 ns
  293. [ 2.095000] s5p-fimc exynos4-fimc.1: state restore latency exceeded, new value 15458 ns
  294. [ 2.105000] s5p-fimc exynos4-fimc.1: stop latency exceeded, new value 625 ns
  295. [ 2.110000] s5p-fimc exynos4-fimc.1: state save latency exceeded, new value 2583 ns
  296. [ 2.120000] s5p-fimc exynos4-fimc.2: start latency exceeded, new value 583 ns
  297. [ 2.125000] s5p-fimc exynos4-fimc.2: state restore latency exceeded, new value 16042 ns
  298. [ 2.135000] s5p-fimc exynos4-fimc.2: stop latency exceeded, new value 625 ns
  299. [ 2.140000] s5p-fimc exynos4-fimc.2: start latency exceeded, new value 625 ns
  300. [ 2.150000] s5p-fimc exynos4-fimc.2: state save latency exceeded, new value 2542 ns
  301. [ 2.155000] s5p-fimc exynos4-fimc.3: start latency exceeded, new value 625 ns
  302. [ 2.160000] s5p-fimc exynos4-fimc.3: state restore latency exceeded, new value 15375 ns
  303. [ 2.170000] s5p-fimc exynos4-fimc.3: stop latency exceeded, new value 625 ns
  304. [ 2.175000] s5p-fimc exynos4-fimc.3: state save latency exceeded, new value 2500 ns
  305. [ 2.185000] s5p-fimc-md: Registered exynos4-fimc.0.m2m as /dev/video0
  306. [ 2.190000] s5p-fimc-md: Registered exynos4-fimc.0.capture as /dev/video1
  307. [ 2.200000] s5p-fimc-md: Registered exynos4-fimc.1.m2m as /dev/video2
  308. [ 2.205000] s5p-fimc-md: Registered exynos4-fimc.1.capture as /dev/video3
  309. [ 2.210000] s5p-fimc-md: Registered exynos4-fimc.2.m2m as /dev/video4
  310. [ 2.220000] s5p-fimc-md: Registered exynos4-fimc.2.capture as /dev/video5
  311. [ 2.225000] s5p-fimc-md: Registered exynos4-fimc.3.m2m as /dev/video6
  312. [ 2.230000] s5p-fimc-md: Registered exynos4-fimc.3.capture as /dev/video7
  313. [ 2.240000] S5P JPEG V4L2 Driver, (c) 2011 Samsung Electronics
  314. [ 2.240000] usb 1-1: new high-speed USB device number 2 using s5p-ehci
  315. [ 2.250000] s5p-jpeg s5p-jpeg.0: encoder device registered as /dev/video8
  316. [ 2.255000] s5p-jpeg s5p-jpeg.0: decoder device registered as /dev/video9
  317. [ 2.265000] s5p-jpeg s5p-jpeg.0: Samsung S5P JPEG codec
  318. [ 2.270000] s5p-mfc s5p-mfc: decoder registered as /dev/video10
  319. [ 2.275000] s5p-mfc s5p-mfc: encoder registered as /dev/video11
  320. [ 2.280000] exynos4-hdmi supply hdmi-en not found, using dummy regulator
  321. [ 2.285000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  322. [ 2.295000] s5p-hdmiphy 8-0038: probe successful
  323. [ 2.295000] ata1.00: ATA-8: ST9160310AS, 0303, max UDMA/133
  324. [ 2.295000] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
  325. [ 2.295000] ata1.00: configured for UDMA/133
  326. [ 2.295000] scsi 0:0:0:0: Direct-Access ATA ST9160310AS 0303 PQ: 0 ANSI: 5
  327. [ 2.325000] s5p-hdmi exynos4-hdmi: probe successful
  328. [ 2.325000] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
  329. [ 2.325000] sd 0:0:0:0: [sda] Write Protect is off
  330. [ 2.325000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPA
  331. [ 2.325000] sd 0:0:0:0: Attached scsi generic sg0 type 0
  332. [ 2.325000] sda: sda1 sda2
  333. [ 2.325000] sd 0:0:0:0: [sda] Attached SCSI disk
  334. [ 2.360000] Samsung TV Mixer driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
  335. [ 2.370000] s5p-mixer s5p-mixer: probe start
  336. [ 2.375000] s5p-mixer s5p-mixer: resources acquired
  337. [ 2.380000] s5p-mixer s5p-mixer: added output 'S5P HDMI connector' from module 's5p-hdmi'
  338. [ 2.385000] s5p-mixer s5p-mixer: module s5p-sdo provides no subdev!
  339. [ 2.390000] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  340. [ 2.390000] s5p-mixer s5p-mixer: registered layer graph0 as /dev/video12
  341. [ 2.405000] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  342. [ 2.405000] fb1: registered frame buffer emulation for /dev/video12
  343. [ 2.420000] s5p-mixer s5p-mixer: registered layer graph1 as /dev/video13
  344. [ 2.425000] fb2: registered frame buffer emulation for /dev/video13
  345. [ 2.425000] hub 1-1:1.0: USB hub found
  346. [ 2.435000] hub 1-1:1.0: 5 ports detected
  347. [ 2.435000] s5p-mixer s5p-mixer: registered layer video0 as /dev/video14
  348. [ 2.435000] fb3: registered frame buffer emulation for /dev/video14
  349. [ 2.435000] s5p-mixer s5p-mixer: probe successful
  350. [ 2.435000] s5p-g2d s5p-g2d.0: device registered as /dev/video15
  351. [ 2.435000] usbcore: registered new interface driver uvcvideo
  352. [ 2.435000] USB Video Class driver (1.1.1)
  353. [ 2.435000] Exynos: Kernel Thermal management registered
  354. [ 2.435000] s3c2410_wdt: S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
  355. [ 2.435000] s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq disabled
  356. [ 2.435000] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
  357. [ 2.435000] Bluetooth: Virtual HCI driver ver 1.3
  358. [ 2.435000] Bluetooth: HCI UART driver ver 2.2
  359. [ 2.435000] Bluetooth: HCI H4 protocol initialized
  360. [ 2.435000] Bluetooth: HCI BCSP protocol initialized
  361. [ 2.435000] Bluetooth: HCILL protocol initialized
  362. [ 2.435000] Bluetooth: HCIATH3K protocol initialized
  363. [ 2.435000] usbcore: registered new interface driver bcm203x
  364. [ 2.435000] usbcore: registered new interface driver bpa10x
  365. [ 2.435000] usbcore: registered new interface driver bfusb
  366. [ 2.435000] usbcore: registered new interface driver btusb
  367. [ 2.435000] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
  368. [ 2.435000] usbcore: registered new interface driver ath3k
  369. [ 2.435000] cpuidle: using governor ladder
  370. [ 2.565000] cpuidle: using governor menu
  371. [ 2.570000] sdhci: Secure Digital Host Controller Interface driver
  372. [ 2.575000] sdhci: Copyright(c) Pierre Ossman
  373. [ 2.580000] s3c-sdhci exynos4-sdhci.2: clock source 2: mmc_busclk.2 (100000000 Hz)
  374. [ 2.590000] exynos4-sdhci.2 supply vmmc not found, using dummy regulator
  375. [ 2.595000] mmc0: SDHCI controller on samsung-hsmmc [exynos4-sdhci.2] using ADMA
  376. [ 2.605000] s3c-sdhci exynos4-sdhci.0: clock source 2: mmc_busclk.2 (100000000 Hz)
  377. [ 2.610000] exynos4-sdhci.0 supply vmmc not found, using dummy regulator
  378. [ 2.620000] mmc1: SDHCI controller on samsung-hsmmc [exynos4-sdhci.0] using ADMA
  379. [ 2.625000] s3c-sdhci exynos4-sdhci.3: clock source 2: mmc_busclk.2 (100000000 Hz)
  380. [ 2.630000] exynos4-sdhci.3 supply vmmc not found, using dummy regulator
  381. [ 2.640000] mmc2: SDHCI controller on samsung-hsmmc [exynos4-sdhci.3] using ADMA
  382. [ 2.650000] usbcore: registered new interface driver usbhid
  383. [ 2.650000] usbhid: USB HID core driver
  384. [ 2.660000] max98088 0-0010: revision �
  385. [ 2.680000] asoc: HiFi <-> samsung-i2s.0 mapping ok
  386. [ 2.680000] asoc: HiFi <-> samsung-i2s.0 mapping ok
  387. [ 2.685000] input: max98089 Headset Jack as /devices/platform/hardkernel-snd/sound/card0/in0
  388. [ 2.690000] ALSA device list:
  389. [ 2.695000] #0: max98089
  390. [ 2.695000] TCP: cubic registered
  391. [ 2.700000] NET: Registered protocol family 17
  392. [ 2.700000] mmc0: new high speed SDHC card at address 0002
  393. [ 2.700000] mmcblk0: mmc0:0002 00000 7.41 GiB
  394. [ 2.700000] mmcblk0: p1 p2 p3 p4
  395. [ 2.720000] Bluetooth: RFCOMM TTY layer initialized
  396. [ 2.725000] Bluetooth: RFCOMM socket layer initialized
  397. [ 2.730000] Bluetooth: RFCOMM ver 1.11
  398. [ 2.730000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  399. [ 2.735000] Bluetooth: BNEP filters: protocol multicast
  400. [ 2.740000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  401. [ 2.750000] lib80211: common routines for IEEE802.11 drivers
  402. [ 2.755000] rfkill_gpio rfkill_gpio: hardkernel-bt device registered.
  403. [ 2.760000] Registering the dns_resolver key type
  404. [ 2.765000] EXYNOS4210: Adaptive Support Voltage init
  405. [ 2.770000] EXYNOS4: ASV: Support 1.2GHz and Group is 0x40000005
  406. [ 2.775000] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2
  407. [ 2.785000] ThumbEE CPU extension supported.
  408. [ 2.790000] registered taskstats version 1
  409. [ 2.790000] VDD_G3D_1.1V: incomplete constraints, leaving on
  410. [ 2.800000] VADC_3.3V: incomplete constraints, leaving on
  411. [ 2.805000] VMIPI_1.8V: incomplete constraints, leaving on
  412. [ 2.810000] VMIPI_1.1V: incomplete constraints, leaving on
  413. [ 2.815000] VDD_ABB_3.3V: incomplete constraints, leaving on
  414. [ 2.820000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  415. [ 2.825000] DVFS: VDD_ARM Voltage table set with 5 Group
  416. [ 2.855000] usb 1-1.1: new high-speed USB device number 3 using s5p-ehci
  417. [ 2.965000] List of all partitions:
  418. [ 2.965000] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  419. [ 2.965000] 0800 156290904 sda driver: sd
  420. [ 2.965000] 0801 83886080 sda1 00000000-0000-0000-0000-000000000000
  421. [ 2.965000] 0802 72403800 sda2 00000000-0000-0000-0000-000000000000
  422. [ 2.965000] b300 7778304 mmcblk0 driver: mmcblk
  423. [ 2.965000] b301 5576850 mmcblk0p1 00000000-0000-0000-0000-000000000000
  424. [ 2.965000] b302 918000 mmcblk0p2 00000000-0000-0000-0000-000000000000
  425. [ 2.965000] b303 1055700 mmcblk0p3 00000000-0000-0000-0000-000000000000
  426. [ 2.965000] b304 137700 mmcblk0p4 00000000-0000-0000-0000-000000000000
  427. [ 2.965000] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: 80840
  428. [ 2.965000]
  429. [ 2.965000] [<800152dc>] (unwind_backtrace+0x0/0xec) from [<805c15f4>] (dump_stack+0x20/0x2)
  430. [ 2.965000] [<805c15f4>] (dump_stack+0x20/0x24) from [<805c1770>] (panic+0x94/0x1d8)
  431. [ 2.965000] [<805c1770>] (panic+0x94/0x1d8) from [<80025dc8>] (__stack_chk_fail+0x20/0x24)
  432. [ 2.965000] [<80025dc8>] (__stack_chk_fail+0x20/0x24) from [<80843c60>] (printk_all_partiti)
  433. [ 2.965000] [<80843c60>] (printk_all_partitions+0x1d4/0x20c) from [<8082ce9c>] (mount_block)
  434. [ 2.965000] [<8082ce9c>] (mount_block_root+0x190/0x240) from [<8082d154>] (mount_root+0xf8/)
  435. [ 2.965000] [<8082d154>] (mount_root+0xf8/0x11c) from [<8082d2e0>] (prepare_namespace+0x168)
  436. [ 2.965000] [<8082d2e0>] (prepare_namespace+0x168/0x1c8) from [<8082cae8>] (kernel_init+0x1)
  437. [ 2.965000] [<8082cae8>] (kernel_init+0x178/0x1b4) from [<8000eefc>] (kernel_thread_exit+0x)
  438. [ 2.965000] CPU0: stopping
  439. [ 2.965000] [<800152dc>] (unwind_backtrace+0x0/0xec) from [<805c15f4>] (dump_stack+0x20/0x2)
  440. [ 2.965000] [<805c15f4>] (dump_stack+0x20/0x24) from [<80013640>] (handle_IPI+0x104/0x184)
  441. [ 2.965000] [<80013640>] (handle_IPI+0x104/0x184) from [<80008558>] (gic_handle_irq+0x70/0x)
  442. [ 2.965000] [<80008558>] (gic_handle_irq+0x70/0x78) from [<805cd940>] (__irq_svc+0x40/0x70)
  443. [ 2.965000] Exception stack(0xbebedda8 to 0xbebeddf0)
  444. [ 2.965000] dda0: 00000000 60000093 808b0a98 00000000 00000001 0000000f
  445. [ 2.965000] ddc0: 00000054 00000003 00000003 60000013 808e9493 bebede6c bebeddc0 bebeddf0
  446. [ 2.965000] dde0: 80026e74 800273a8 60000013 ffffffff
  447. [ 2.965000] [<805cd940>] (__irq_svc+0x40/0x70) from [<800273a8>] (vprintk+0x3cc/0x44c)
  448. [ 2.965000] [<800273a8>] (vprintk+0x3cc/0x44c) from [<805c18e0>] (printk+0x2c/0x34)
  449. [ 2.965000] [<805c18e0>] (printk+0x2c/0x34) from [<8036e9cc>] (__dev_printk+0x60/0x70)
  450. [ 2.965000] [<8036e9cc>] (__dev_printk+0x60/0x70) from [<8036ea20>] (_dev_info+0x44/0x50)
  451. [ 2.965000] [<8036ea20>] (_dev_info+0x44/0x50) from [<803d473c>] (usb_new_device+0xc0/0x21c)
  452. [ 2.965000] [<803d473c>] (usb_new_device+0xc0/0x21c) from [<803d55b0>] (hub_thread+0x994/0x)
  453. [ 2.965000] [<803d55b0>] (hub_thread+0x994/0xef0) from [<80046af0>] (kthread+0x9c/0xac)
  454. [ 2.965000] [<80046af0>] (kthread+0x9c/0xac) from [<8000eefc>] (kernel_thread_exit+0x0/0x8)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!