Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Linux version 3.10.28 (jar@jar-virtual-machine) (gcc version 4.6. 4 (OpenWrt/Linaro GCC 4.6-2013.05 r39598) ) #1 Mon Feb 17 10:42:07 CET 2014
- [ 0.000000] MyLoader: sysp=00000000, boardp=00000000, parts=00000000
- [ 0.000000] bootconsole [early0] enabled
- [ 0.000000] CPU revision is: 0001974c (MIPS 74Kc)
- [ 0.000000] SoC: Atheros AR9344 rev 2
- [ 0.000000] Clocks: CPU:560.000MHz, DDR:480.000MHz, AHB:240.000MHz, Ref:40.00 0MHz
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 08000000 @ 00000000 (usable)
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x00000000-0x07ffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00000000-0x07ffffff]
- [ 0.000000] On node 0 totalpages: 32768
- [ 0.000000] free_area_init_node: node 0, pgdat 8030e9d0, node_mem_map 8100000 0
- [ 0.000000] Normal zone: 256 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
- [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
- [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 32512
- [ 0.000000] Kernel command line: board=MYNET-N750 console=ttyS0,115200 mtdpa rts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k (firmware),64k(radiocfg)ro rootfstype=squashfs,jffs2 noinitrd
- [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
- [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Writing ErrCtl register=00000000
- [ 0.000000] Readback ErrCtl register=00000000
- [ 0.000000] Memory: 126248k/131072k available (2237k kernel code, 4824k reser ved, 596k data, 236k init, 0k highmem)
- [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] NR_IRQS:51
- [ 0.060000] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
- [ 0.070000] pid_max: default: 32768 minimum: 301
- [ 0.070000] Mount-cache hash table entries: 512
- [ 0.080000] NET: Registered protocol family 16
- [ 0.080000] MIPS: machine is WD My Net N750
- [ 0.110000] registering PCI controller with io_map_base unset
- [ 0.340000] bio: create slab <bio-0> at 0
- [ 0.340000] PCI host bridge to bus 0000:00
- [ 0.350000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
- [ 0.350000] pci_bus 0000:00: root bus resource [io 0x0000]
- [ 0.360000] pci_bus 0000:00: No busn resource found for root bus, will use [b us 00-ff]
- [ 0.360000] pci 0000:00:00.0: [168c:0030] type 00 class 0x028000
- [ 0.360000] pci 0000:00:00.0: invalid calibration data
- [ 0.370000] pci 0000:00:00.0: reg 10: [mem 0x00000000-0x0001ffff 64bit]
- [ 0.370000] pci 0000:00:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
- [ 0.370000] pci 0000:00:00.0: supports D1
- [ 0.370000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
- [ 0.370000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
- [ 0.370000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bi t]
- [ 0.370000] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref ]
- [ 0.380000] pci 0000:00:00.0: using irq 40 for pin 1
- [ 0.380000] Switching to clocksource MIPS
- [ 0.390000] NET: Registered protocol family 2
- [ 0.390000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
- [ 0.390000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.400000] TCP: Hash tables configured (established 1024 bind 1024)
- [ 0.400000] TCP: reno registered
- [ 0.400000] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.410000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.420000] NET: Registered protocol family 1
- [ 0.420000] PCI: CLS 0 bytes, default 32
- [ 0.430000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.440000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORIT Y) (c) 2001-2006 Red Hat, Inc.
- [ 0.450000] msgmni has been set to 246
- [ 0.450000] io scheduler noop registered
- [ 0.460000] io scheduler deadline registered (default)
- [ 0.460000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
- [ 0.490000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
- [ 0.500000] console [ttyS0] enabled, bootconsole disabled
- [ 0.510000] ath79-spi ath79-spi: master is unqueued, this is deprecated
- [ 0.520000] m25p80 spi0.0: found mx25l12805d, expected m25p80
- [ 0.520000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
- [ 0.530000] 6 cmdlinepart partitions found on MTD device spi0.0
- [ 0.530000] Creating 6 MTD partitions on "spi0.0":
- [ 0.540000] 0x000000000000-0x000000040000 : "u-boot"
- [ 0.550000] 0x000000040000-0x000000050000 : "u-boot-env"
- [ 0.550000] 0x000000050000-0x000000060000 : "devdata"
- [ 0.560000] 0x000000060000-0x000000070000 : "devconf"
- [ 0.570000] 0x000000070000-0x000000ff0000 : "firmware"
- [ 0.600000] 2 seama-fw partitions found on MTD device firmware
- [ 0.600000] 0x000000070000-0x0000001b0000 : "kernel"
- [ 0.610000] 0x0000001b0000-0x000000ff0000 : "rootfs"
- [ 0.610000] mtd: device 6 (rootfs) set to be root filesystem
- [ 0.620000] 1 squashfs-split partitions found on MTD device rootfs
- [ 0.630000] 0x000000560000-0x000000ff0000 : "rootfs_data"
- [ 0.630000] 0x000000ff0000-0x000001000000 : "radiocfg"
- [ 1.670000] switch0: Atheros AR8327 rev. 2 switch registered on ag71xx-mdio.0
- [ 2.890000] libphy: ag71xx_mdio: probed
- [ 4.440000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd0 33, driver=Atheros AR8216/AR8236/AR8316]
- [ 4.450000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
- [ 4.460000] TCP: cubic registered
- [ 4.470000] NET: Registered protocol family 17
- [ 4.470000] 8021q: 802.1Q VLAN Support v1.8
- [ 4.480000] VFS: Mounted root (squashfs filesystem) readonly on device 31:6.
- [ 4.490000] Freeing unused kernel memory: 236K (80325000 - 80360000)
- [ 7.760000] usbcore: registered new interface driver usbfs
- [ 7.770000] usbcore: registered new interface driver hub
- [ 7.770000] usbcore: registered new device driver usb
- [ 7.830000] SCSI subsystem initialized
- [ 7.840000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 7.840000] ehci-platform: EHCI generic platform driver
- [ 7.850000] ehci-platform ehci-platform: EHCI Host Controller
- [ 7.860000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
- [ 7.870000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
- [ 7.890000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
- [ 7.890000] hub 1-0:1.0: USB hub found
- [ 7.900000] hub 1-0:1.0: 1 port detected
- [ 7.910000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 7.920000] usbcore: registered new interface driver usb-storage
- [ 8.220000] usb 1-1: new high-speed USB device number 2 using ehci-platform
- [ 8.370000] hub 1-1:1.0: USB hub found
- [ 8.370000] hub 1-1:1.0: 4 ports detected
- [ 8.510000] eth0: link up (1000Mbps/Full duplex)
- [ 8.660000] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
- [ 8.810000] usb-storage 1-1.1:1.0: USB Mass Storage device detected
- [ 8.830000] scsi0 : usb-storage 1-1.1:1.0
- [ 8.940000] usb 1-1.2: new high-speed USB device number 4 using ehci-platform
- [ 9.180000] usb-storage 1-1.2:1.0: USB Mass Storage device detected
- [ 9.180000] scsi1 : usb-storage 1-1.2:1.0
- [ 9.210000] jffs2: notice: (378) jffs2_build_xattr_subsystem: complete buildi ng xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 43 of xref (0 dead, 25 orphan) found.
- [ 9.840000] scsi 0:0:0:0: Direct-Access WD Elements 107C 1042 PQ : 0 ANSI: 6
- [ 9.850000] sd 0:0:0:0: [sda] Spinning up disk...
- [ 10.190000] scsi 1:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ : 0 ANSI: 2
- [ 10.200000] sd 1:0:0:0: [sdb] 28715008 512-byte logical blocks: (14.7 GB/13.6 GiB)
- [ 10.210000] sd 1:0:0:0: [sdb] Write Protect is off
- [ 10.210000] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00
- [ 10.210000] sd 1:0:0:0: [sdb] No Caching mode page found
- [ 10.220000] sd 1:0:0:0: [sdb] Assuming drive cache: write through
- [ 10.230000] sd 1:0:0:0: [sdb] No Caching mode page found
- [ 10.230000] sd 1:0:0:0: [sdb] Assuming drive cache: write through
- [ 10.280000] sdb: sdb1 sdb2
- [ 10.280000] sd 1:0:0:0: [sdb] No Caching mode page found
- [ 10.290000] sd 1:0:0:0: [sdb] Assuming drive cache: write through
- [ 10.290000] sd 1:0:0:0: [sdb] Attached SCSI removable disk
- [ 14.350000] EXT4-fs (sdb1): mounting ext2 file system using the ext4 subsyste m
- [ 14.380000] EXT4-fs (sdb1): warning: mounting unchecked fs, running e2fsck is recommended
- [ 14.390000] EXT4-fs (sdb1): mounted filesystem without journal. Opts:
- [ 15.290000] eth0: link down
- [ 15.660000] Adding 1048572k swap on /dev/sdb2. Priority:-1 extents:1 across: 1048572k
- [ 18.920000] NET: Registered protocol family 10
- [ 18.980000] nf_conntrack version 0.5.0 (1976 buckets, 7904 max)
- [ 18.990000] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 19.030000] fuse init (API version 7.22)
- [ 19.050000] Loading modules backported from Linux version master-2014-01-23-0 -g62c147d
- [ 19.060000] Backport generated by backports.git backports-20140124-0-g1256d3e
- [ 19.070000] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 19.100000] usbcore: registered new interface driver ums-alauda
- [ 19.110000] usbcore: registered new interface driver ums-cypress
- [ 19.110000] usbcore: registered new interface driver ums-datafab
- [ 19.120000] usbcore: registered new interface driver ums-freecom
- [ 19.130000] usbcore: registered new interface driver ums-isd200
- [ 19.140000] usbcore: registered new interface driver ums-jumpshot
- [ 19.150000] usbcore: registered new interface driver ums-karma
- [ 19.160000] usbcore: registered new interface driver ums-sddr09
- [ 19.160000] usbcore: registered new interface driver ums-sddr55
- [ 19.170000] usbcore: registered new interface driver ums-usbat
- [ 19.180000] usbcore: registered new interface driver usblp
- [ 19.200000] xt_time: kernel timezone is -0000
- [ 19.230000] cfg80211: Calling CRDA to update world regulatory domain
- [ 19.230000] cfg80211: World regulatory domain updated:
- [ 10.860000] .........
- [ 19.240000] cfg80211: DFS Master region: unset<6>[ 19.240000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 19.250000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 20 00 mBm)
- [ 19.260000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 20 00 mBm)
- [ 19.270000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 20 00 mBm)
- [ 19.270000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 20 00 mBm)
- [ 19.280000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 20 00 mBm)
- [ 19.290000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
- [ 19.300000] ready
- [ 19.330000] sd 0:0:0:0: [sda] 732558336 4096-byte logical blocks: (3.00 TB/2. 72 TiB)
- [ 19.360000] sd 0:0:0:0: [sda] Write Protect is off
- [ 19.360000] sd 0:0:0:0: [sda] Mode Sense: 53 00 10 08
- [ 19.360000] sd 0:0:0:0: [sda] No Caching mode page found
- [ 19.370000] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 19.380000] sd 0:0:0:0: [sda] 732558336 4096-byte logical blocks: (3.00 TB/2. 72 TiB)
- [ 19.390000] sd 0:0:0:0: [sda] No Caching mode page found
- [ 19.390000] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 19.410000] PPP generic driver version 2.4.2
- [ 19.420000] sda: sda2
- [ 19.430000] NET: Registered protocol family 24
- [ 19.450000] sd 0:0:0:0: [sda] 732558336 4096-byte logical blocks: (3.00 TB/2. 72 TiB)
- [ 19.460000] sd 0:0:0:0: [sda] No Caching mode page found
- [ 19.460000] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 19.470000] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 19.540000] ath: EEPROM regdomain: 0x0
- [ 19.540000] ath: EEPROM indicates default country code should be used
- [ 19.540000] ath: doing EEPROM country->regdmn map search
- [ 19.540000] ath: country maps to regdmn code: 0x3a
- [ 19.540000] ath: Country alpha2 being used: US
- [ 19.540000] ath: Regpair used: 0x3a
- [ 19.550000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 19.570000] ieee80211 phy0: Atheros AR9340 Rev:0 mem=0xb8100000, irq=47
- [ 19.580000] cfg80211: Calling CRDA for country: US
- [ 19.580000] cfg80211: Regulatory domain changed to country: US
- [ 19.590000] cfg80211: DFS Master region: FCC
- [ 19.590000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gai n, max_eirp)
- [ 19.600000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 27 00 mBm)
- [ 19.610000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 17 00 mBm)
- [ 19.620000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 24 00 mBm)
- [ 19.620000] cfg80211: (5490000 KHz - 5600000 KHz @ 80000 KHz), (300 mBi, 24 00 mBm)
- [ 19.630000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 24 00 mBm)
- [ 19.640000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 30 00 mBm)
- [ 19.650000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 40 00 mBm)
- [ 19.660000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
- [ 19.670000] ath: EEPROM regdomain: 0x0
- [ 19.670000] ath: EEPROM indicates default country code should be used
- [ 19.670000] ath: doing EEPROM country->regdmn map search
- [ 19.670000] ath: country maps to regdmn code: 0x3a
- [ 19.670000] ath: Country alpha2 being used: US
- [ 19.670000] ath: Regpair used: 0x3a
- [ 19.680000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
- [ 19.680000] ieee80211 phy1: Atheros AR9300 Rev:3 mem=0xb0000000, irq=40
- [ 19.770000] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsyste m
- [ 19.980000] EXT4-fs (sda2): warning: mounting unchecked fs, running e2fsck is recommended
- [ 20.010000] EXT4-fs (sda2): mounted filesystem without journal. Opts:
- [ 22.690000] jffs2: notice: (1278) jffs2_build_xattr_subsystem: complete build ing xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 43 of xref (0 dead, 25 orphan) found.
- [ 24.100000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 24.100000] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
- [ 24.130000] device eth0.1 entered promiscuous mode
- [ 24.130000] device eth0 entered promiscuous mode
- [ 24.160000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
- [ 25.520000] eth0: link up (1000Mbps/Full duplex)
- [ 25.550000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 25.550000] br-lan: port 1(eth0.1) entered forwarding state
- [ 25.560000] br-lan: port 1(eth0.1) entered forwarding state
- [ 25.560000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
- [ 25.600000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
- [ 25.810000] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready
- [ 25.870000] device wlan0-1 entered promiscuous mode
- [ 25.870000] br-lan: port 2(wlan0-1) entered forwarding state
- [ 25.880000] br-lan: port 2(wlan0-1) entered forwarding state
- [ 26.100000] br-lan: port 2(wlan0-1) entered disabled state
- [ 27.560000] br-lan: port 1(eth0.1) entered forwarding state
- [ 28.520000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 30.160000] wlan0: authenticate with 90:f6:52:a2:f6:58
- [ 30.180000] wlan0: send auth to 90:f6:52:a2:f6:58 (try 1/3)
- [ 30.190000] wlan0: authenticated
- [ 30.200000] ath9k ar934x_wmac wlan0: disabling HT/VHT due to WEP/TKIP use
- [ 30.210000] wlan0: associate with 90:f6:52:a2:f6:58 (try 1/3)
- [ 30.210000] wlan0: RX AssocResp from 90:f6:52:a2:f6:58 (capab=0x411 status=0 aid=1)
- [ 30.220000] wlan0: associated
- [ 30.230000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 30.500000] br-lan: port 2(wlan0-1) entered forwarding state
- [ 30.510000] br-lan: port 2(wlan0-1) entered forwarding state
- [ 30.510000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
- [ 32.510000] br-lan: port 2(wlan0-1) entered forwarding state
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement