API tools faq
paste
Advertisement
deanmsands3

Pandaboard Validation Boot Up

deanmsands3
Oct 28th, 2013
161
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 25.46 KB | None | 0 0
raw download clone embed print report
  1.  
  2.  
  3. Texas Instruments X-Loader 1.41 (Sep 29 2011 - 10:43:53)
  4. mmc read: Invalid size
  5. Starting OS Bootloader from MMC/SD1 ...
  6.  
  7.  
  8. U-Boot 1.1.4-gc1cd80bc-dirty (Oct 12 2011 - 17:56:27)
  9.  
  10. Load address: 0x80e80000
  11. DRAM: 1024 MB
  12. Flash: 0 kB
  13. Using default environment
  14.  
  15. In: serial
  16. Out: serial
  17. Err: serial
  18. Hit any key to stop autoboot: 0
  19. mmc read: Invalid size
  20.  
  21. 4020344 bytes read
  22. ## Booting image at 82000000 ...
  23. Image Name: Linux-3.0.4+
  24. Image Type: ARM Linux Kernel Image (uncompressed)
  25. Data Size: 4020280 Bytes = 3.8 MB
  26. Load Address: 80008000
  27. Entry Point: 80008000
  28. Verifying Checksum ... OK
  29. OK
  30.  
  31. Starting kernel ...
  32.  
  33. Uncompressing Linux... done, booting the kernel.
  34. [ 0.000000] Linux version 3.0.4+ (danders@ccd-dev) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-203) ) #9 SMP PREEMPT Wed Oct 12 17:00:57 CDT 2011
  35. [ 0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c5387f
  36. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  37. [ 0.000000] Machine: OMAP4 Panda board
  38. [ 0.000000] Reserving 33554432 bytes SDRAM for VRAM
  39. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  40. [ 0.000000] OMAP4430 ES2.1
  41. [ 0.000000] SRAM: Mapped pa 0x40300000 to va 0xfe400000 size: 0xe000
  42. [ 0.000000] PERCPU: Embedded 7 pages/cpu @c105e000 s6304 r8192 d14176 u32768
  43. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 237568
  44. [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=456M@0x80000000 mem=512M@0xA0000000 init=/linuxrc root=/dev/mmcblk0p2 rootdelay=3 rootfstype=ext3 vram=32M omapfb.vram=0:16M,1:16M
  45. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  46. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  47. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  48. [ 0.000000] Memory: 456MB 480MB = 936MB total
  49. [ 0.000000] Memory: 941300k/941300k available, 49932k reserved, 229376K highmem
  50. [ 0.000000] Virtual kernel memory layout:
  51. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  52. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  53. [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  54. [ 0.000000] vmalloc : 0xf0800000 - 0xf8000000 ( 120 MB)
  55. [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
  56. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  57. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  58. [ 0.000000] .text : 0xc0008000 - 0xc075d000 (7508 kB)
  59. [ 0.000000] .init : 0xc075d000 - 0xc07a88a0 ( 303 kB)
  60. [ 0.000000] .data : 0xc07aa000 - 0xc081be40 ( 456 kB)
  61. [ 0.000000] .bss : 0xc081be64 - 0xc0855c28 ( 232 kB)
  62. [ 0.000000] Preemptible hierarchical RCU implementation.
  63. [ 0.000000] Verbose stalled-CPUs detection is disabled.
  64. [ 0.000000] NR_IRQS:410
  65. [ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
  66. [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
  67. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  68. [ 0.000000] Console: colour dummy device 80x30
  69. [ 0.000213] Calibrating delay loop... 2007.19 BogoMIPS (lpj=7839744)
  70. [ 0.023498] pid_max: default: 32768 minimum: 301
  71. [ 0.070404] Security Framework initialized
  72. [ 0.070648] Mount-cache hash table entries: 512
  73. [ 0.070648] CPU: Testing write buffer coherency: ok
  74. [ 0.071380] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  75. [ 0.071380] twd_timer_setup: no clock found
  76. [ 0.071533] Calibrating local timer... 491.71MHz.
  77. [ 0.117462] L310 cache controller enabled
  78. [ 0.117462] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x5e470000, Cache size: 1048576 B
  79. [ 0.178741] CPU1: Booted secondary processor
  80. [ 0.247009] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  81. [ 0.247070] Brought up 2 CPUs
  82. [ 0.247100] SMP: Total of 2 processors activated (3972.37 BogoMIPS).
  83. [ 0.247222] devtmpfs: initialized
  84. [ 0.250457] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for emif_fw
  85. [ 0.250549] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_instr
  86. [ 0.250549] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_1
  87. [ 0.250579] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_2
  88. [ 0.250579] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_abe
  89. [ 0.250610] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_cfg
  90. [ 0.250610] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
  91. [ 0.250610] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
  92. [ 0.250640] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for mpu_private
  93. [ 0.250640] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for dsp
  94. [ 0.250701] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for sl2if
  95. [ 0.250701] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
  96. [ 0.267578] omap_hwmod: ipu: failed to hardreset
  97. [ 0.270629] omap_hwmod: mcpdm: cannot be enabled (3)
  98. [ 0.275634] print_constraints: dummy:
  99. [ 0.275817] NET: Registered protocol family 16
  100. [ 0.275970] GPMC revision 6.0
  101. [ 0.278808] OMAP GPIO hardware version 0.1
  102. [ 0.279113] OMAP GPIO hardware version 0.1
  103. [ 0.279296] OMAP GPIO hardware version 0.1
  104. [ 0.279388] omap_device: omap_gpio.3: new worst case activate latency 0: 30517
  105. [ 0.279541] OMAP GPIO hardware version 0.1
  106. [ 0.279754] OMAP GPIO hardware version 0.1
  107. [ 0.279968] OMAP GPIO hardware version 0.1
  108. [ 0.281524] omap_mux_init: Add partition: #1: core, flags: 2
  109. [ 0.281524] omap_mux_init: Add partition: #2: wkup, flags: 2
  110. [ 0.284118] omap_device: omap_uart.1: new worst case activate latency 0: 122070
  111. [ 0.295989] pm_dbg_init: only OMAP3 supported
  112. [ 0.296203] omap_ipussdev_init: could not look up iss
  113. [ 0.297454] OMAP DMA hardware revision 0.0
  114. [ 0.318237] bio: create slab <bio-0> at 0
  115. [ 0.319152] print_constraints: vwl1271: 1800 mV
  116. [ 0.320526] SCSI subsystem initialized
  117. [ 0.320922] omap_device: omap2_mcspi.2: new worst case activate latency 0: 61035
  118. [ 0.321105] omap_device: omap2_mcspi.2: new worst case deactivate latency 0: 30517
  119. [ 0.321350] omap_device: omap2_mcspi.3: new worst case deactivate latency 0: 61035
  120. [ 0.322326] usbcore: registered new interface driver usbfs
  121. [ 0.322601] usbcore: registered new interface driver hub
  122. [ 0.322784] usbcore: registered new device driver usb
  123. [ 0.324707] omap_device: omap_i2c.1: new worst case activate latency 0: 61035
  124. [ 0.330871] omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz
  125. [ 0.340118] Skipping twl internal clock init and using bootloader value (unknown osc rate)
  126. [ 0.340637] twl6030: PIH (irq 39) chaining IRQs 368..387
  127. [ 0.341461] print_constraints: VUSB: 3300 mV normal standby
  128. [ 0.539367] twl6030_usb twl6030_usb: Initialized TWL6030 USB module
  129. [ 0.539550] twl6030: Interrupt status 0x040000
  130. [ 0.540344] print_constraints: VMMC: 1200 <--> 3000 mV at 3000 mV normal standby
  131. [ 0.540924] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal standby
  132. [ 0.541381] print_constraints: VCXIO: 1800 mV normal standby
  133. [ 0.541870] print_constraints: VDAC: 1800 mV normal standby
  134. [ 0.542480] print_constraints: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
  135. [ 0.542999] print_constraints: VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby
  136. [ 0.543548] print_constraints: CLK32KG:
  137. [ 0.544006] print_constraints: VANA: 2100 mV normal standby
  138. [ 0.544128] omap_device: omap_i2c.2: new worst case activate latency 0: 122070
  139. [ 0.551910] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
  140. [ 0.567199] omap_i2c omap_i2c.3: bus 3 rev4.0 at 100 kHz
  141. [ 0.582397] omap_i2c omap_i2c.4: bus 4 rev4.0 at 400 kHz
  142. [ 0.583496] Advanced Linux Sound Architecture Driver Version 1.0.24.
  143. [ 0.584106] Bluetooth: Core ver 2.16
  144. [ 0.584289] NET: Registered protocol family 31
  145. [ 0.584289] Bluetooth: HCI device and connection manager initialized
  146. [ 0.584289] Bluetooth: HCI socket layer initialized
  147. [ 0.584320] Bluetooth: L2CAP socket layer initialized
  148. [ 0.584381] Bluetooth: SCO socket layer initialized
  149. [ 0.584808] cfg80211: Calling CRDA to update world regulatory domain
  150. [ 0.585754] Switching to clocksource 32k_counter
  151. [ 0.590026] Switched to NOHz mode on CPU #0
  152. [ 0.590362] Switched to NOHz mode on CPU #1
  153. [ 0.602569] musb-hdrc: version 6.0, musb-dma, otg (peripheral+host)
  154. [ 0.602722] omap_device: musb-omap2430.-1: new worst case activate latency 0: 91552
  155. [ 0.602935] musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124
  156. [ 0.603149] NET: Registered protocol family 2
  157. [ 0.603149] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  158. [ 0.603424] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  159. [ 0.603424] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  160. [ 0.606048] TCP: Hash tables configured (established 131072 bind 65536)
  161. [ 0.606048] TCP reno registered
  162. [ 0.606079] UDP hash table entries: 512 (order: 2, 16384 bytes)
  163. [ 0.606079] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  164. [ 0.606079] NET: Registered protocol family 1
  165. [ 0.606628] RPC: Registered named UNIX socket transport module.
  166. [ 0.606628] RPC: Registered udp transport module.
  167. [ 0.606628] RPC: Registered tcp transport module.
  168. [ 0.606628] RPC: Registered tcp NFSv4.1 backchannel transport module.
  169. [ 0.606658] NetWinder Floating Point Emulator V0.97 (double precision)
  170. [ 0.642272] ipu-power ipu0: Test of writing to the device message log,done from ipu_pm_init
  171. [ 0.642272] ipu-power initialized ipu, major: 253, minor: 0
  172. [ 0.642547] omap-iommu omap-iommu.0: ducati registered
  173. [ 0.642700] omap-iommu omap-iommu.1: tesla registered
  174. [ 0.643218] iovmm-omap initialized ducati, major: 252, base-minor: 0
  175. [ 0.643432] iovmm-omap initialized tesla, major: 252, base-minor: 1
  176. [ 0.643707] omap-remoteproc omap-remoteproc.0: omap_rproc_probe: adding rproc tesla
  177. [ 0.644042] omap-remoteproc omap-remoteproc.0: omap-rproc initialized tesla, major: 251, base-minor: 0
  178. [ 0.644042] omap-remoteproc omap-remoteproc.1: omap_rproc_probe: adding rproc ducati-proc0
  179. [ 0.644256] omap-remoteproc omap-remoteproc.1: omap-rproc initialized ducati-proc0, major: 251, base-minor: 1
  180. [ 0.644287] omap-remoteproc omap-remoteproc.2: omap_rproc_probe: adding rproc ducati-proc1
  181. [ 0.644500] omap-remoteproc omap-remoteproc.2: omap-rproc initialized ducati-proc1, major: 251, base-minor: 2
  182. [ 0.768768] highmem bounce pool size: 64 pages
  183. [ 0.769042] VFS: Disk quotas dquot_6.5.2
  184. [ 0.769256] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  185. [ 0.769897] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  186. [ 0.770294] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  187. [ 0.770294] ROMFS MTD (C) 2007 Red Hat, Inc.
  188. [ 0.770599] msgmni has been set to 1390
  189. [ 0.771514] io scheduler noop registered
  190. [ 0.771514] io scheduler deadline registered
  191. [ 0.771606] io scheduler cfq registered (default)
  192. [ 0.832397] OMAP DSS rev 4.0
  193. [ 0.834716] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  194. [ 1.429870] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
  195. [ 1.562377] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
  196. [ 1.718627] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
  197. [ 2.717834] console [ttyO2] enabled
  198. [ 2.856201] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
  199. [ 2.976806] [drm] Initialized drm 1.1.0 20060810
  200. [ 2.990966] brd: module loaded
  201. [ 2.998901] loop: module loaded
  202. [ 3.002685] omap_device: omap_i2c.1: new worst case deactivate latency 0: 30517
  203. [ 3.013031] mtdoops: mtd device (mtddev=name/number) must be supplied
  204. [ 3.019836] omap2-nand driver initializing
  205. [ 3.024414] OneNAND driver initializing
  206. [ 3.030395] usbcore: registered new interface driver asix
  207. [ 3.036224] usbcore: registered new interface driver cdc_ether
  208. [ 3.042480] usbcore: registered new interface driver smsc95xx
  209. [ 3.048645] usbcore: registered new interface driver net1080
  210. [ 3.054718] usbcore: registered new interface driver cdc_subset
  211. [ 3.061035] usbcore: registered new interface driver zaurus
  212. [ 3.066894] cdc_ncm: 01-June-2011
  213. [ 3.070526] usbcore: registered new interface driver cdc_ncm
  214. [ 3.076843] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  215. [ 3.083679] _regulator_get: ehci-omap.0 supply hsusb0 not found, using dummy regulator
  216. [ 3.092132] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
  217. [ 3.098388] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
  218. [ 3.104217] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00
  219. [ 3.119415] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
  220. [ 3.125427] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  221. [ 3.130035] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  222. [ 3.140167] usb usb1: Product: OMAP-EHCI Host Controller
  223. [ 3.145721] usb usb1: Manufacturer: Linux 3.0.4+ ehci_hcd
  224. [ 3.151367] usb usb1: SerialNumber: ehci-omap.0
  225. [ 3.156738] hub 1-0:1.0: USB hub found
  226. [ 3.158874] hub 1-0:1.0: 3 ports detected
  227. [ 3.194885] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  228. [ 3.201354] ohci-omap3 ohci-omap3.0: OMAP3 OHCI Host Controller
  229. [ 3.207946] ohci-omap3 ohci-omap3.0: new USB bus registered, assigned bus number 2
  230. [ 3.211730] ohci-omap3 ohci-omap3.0: irq 108, io mem 0x4a064800
  231. [ 3.303344] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  232. [ 3.314422] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  233. [ 3.321990] usb usb2: Product: OMAP3 OHCI Host Controller
  234. [ 3.327636] usb usb2: Manufacturer: Linux 3.0.4+ ohci_hcd
  235. [ 3.333282] usb usb2: SerialNumber: ohci-omap3.0
  236. [ 3.338806] hub 2-0:1.0: USB hub found
  237. [ 3.338806] hub 2-0:1.0: 3 ports detected
  238. [ 3.347686] usbcore: registered new interface driver cdc_wdm
  239. [ 3.352447] Initializing USB Mass Storage driver...
  240. [ 3.358947] usbcore: registered new interface driver usb-storage
  241. [ 3.365264] USB Mass Storage support registered.
  242. [ 3.370300] usbcore: registered new interface driver libusual
  243. [ 3.486572] usb 1-1: new high speed USB device number 2 using ehci-omap
  244. [ 3.846313] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  245. [ 3.846313] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  246. [ 3.861511] hub 1-1:1.0: USB hub found
  247. [ 3.865539] hub 1-1:1.0: 5 ports detected
  248. [ 3.871276] usbcore: registered new interface driver usbtest
  249. [ 3.877624] mousedev: PS/2 mouse device common for all mice
  250. [ 3.886230] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
  251. [ 3.892852] twl_rtc twl_rtc: Power up reset detected.
  252. [ 3.898773] omap_device: omap_i2c.1: new worst case deactivate latency 0: 61035
  253. [ 3.906433] omap_device: omap_i2c.1: new worst case activate latency 0: 7659912
  254. [ 3.914367] twl_rtc twl_rtc: Enabling TWL-RTC.
  255. [ 3.919433] i2c /dev entries driver
  256. [ 3.924407] lirc_dev: IR Remote Control driver registered, major 248
  257. [ 3.931152] IR NEC protocol handler initialized
  258. [ 3.931152] IR RC5(x) protocol handler initialized
  259. [ 3.940887] IR RC6 protocol handler initialized
  260. [ 3.945648] IR JVC protocol handler initialized
  261. [ 3.945648] IR Sony protocol handler initialized
  262. [ 3.945648] IR RC5 (streamzap) protocol handler initialized
  263. [ 3.961059] IR LIRC bridge handler initialized
  264. [ 3.965850] Linux video capture interface: v2.00
  265. [ 3.973022] Driver for 1-wire Dallas network protocol.
  266. [ 3.979003] omap_device: omap_wdt.-1: new worst case activate latency 0: 183105
  267. [ 3.987182] OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
  268. [ 3.993591] omap_device: omap_wdt.-1: new worst case deactivate latency 0: 91552
  269. [ 4.001617] Bluetooth: HCI UART driver ver 2.2
  270. [ 4.006286] Bluetooth: HCI H4 protocol initialized
  271. [ 4.011322] Bluetooth: HCI BCSP protocol initialized
  272. [ 4.011596] Bluetooth: HCILL protocol initialized
  273. [ 4.011596] Bluetooth: Broadcom Blutonium firmware driver ver 1.2
  274. [ 4.028076] usbcore: registered new interface driver bcm203x
  275. [ 4.033996] Bluetooth: Digianswer Bluetooth USB driver ver 0.10
  276. [ 4.040374] usbcore: registered new interface driver bpa10x
  277. [ 4.040374] cpuidle: using governor ladder
  278. [ 4.050537] cpuidle: using governor menu
  279. [ 4.055938] omap_device: omap_i2c.1: new worst case deactivate latency 0: 91552
  280. [ 4.064239] twl6030: Interrupt status 0x000800
  281. [ 4.069122] _regulator_get: omap_hsmmc.0 supply vmmc_aux not found, using dummy regulator
  282. [ 4.078948] _regulator_get: omap_hsmmc.4 supply vmmc_aux not found, using dummy regulator
  283. [ 4.095428] usbcore: registered new interface driver usbhid
  284. [ 4.101257] usbhid: USB HID core driver
  285. [ 4.113922] proc4430_drv_initializeModule
  286. [ 4.118804] omap-devicehandler omap-devicehandler.0: omap_devh_probe: adding devh Tesla
  287. [ 4.127471] omap-devh initialized Tesla, major: 242, base-minor: 0
  288. [ 4.134277] omap-devicehandler omap-devicehandler.1: omap_devh_probe: adding devh SysM3
  289. [ 4.151672] omap-devh initialized SysM3, major: 242, base-minor: 1
  290. [ 4.158355] omap-devicehandler omap-devicehandler.2: omap_devh_probe: adding devh AppM3
  291. [ 4.166992] omap-devh initialized AppM3, major: 242, base-minor: 2
  292. [ 4.173675] usb 1-1.1: new high speed USB device number 3 using ehci-omap
  293. [ 4.183868] SDP4430 SoC init
  294. [ 4.187744] omap_device: aess.-1: new worst case activate latency 0: 30517
  295. [ 4.208160] mmc1: card claims to support voltages below the defined range. These will be ignored.
  296. [ 4.223419] asoc: null-codec-dai <-> MultiMedia1 mapping ok
  297. [ 4.230224] asoc: null-codec-dai <-> MultiMedia2 mapping ok
  298. [ 4.237335] asoc: null-codec-dai <-> Voice mapping ok
  299. [ 4.243743] asoc: null-codec-dai <-> Tones mapping ok
  300. [ 4.250030] asoc: null-codec-dai <-> Vibra mapping ok
  301. [ 4.255981] asoc: null-codec-dai <-> MODEM mapping ok
  302. [ 4.261810] asoc: null-codec-dai <-> MultiMedia1 LP mapping ok
  303. [ 4.262390] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
  304. [ 4.263122] mmc1: new SDIO card at address 0001
  305. [ 4.279510] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
  306. [ 4.286437] asoc: twl6040-dl1 <-> mcpdm-dl mapping ok
  307. [ 4.293579] asoc: dmic-hifi <-> omap-dmic-dai-0 mapping ok
  308. [ 4.301116] twl6040-codec twl6040-codec: ASoC: Failed to create Aux/FM Stereo In debugfs file
  309. [ 4.310668] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok
  310. [ 4.313049] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  311. [ 4.313049] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  312. [ 4.331695] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok
  313. [ 4.337127] smsc95xx v1.0.4
  314. [ 4.337677] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok
  315. [ 4.338317] asoc: twl6040-vib <-> mcpdm-vib mapping ok
  316. [ 4.338989] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
  317. [ 4.339569] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
  318. [ 4.340270] asoc: MODEM <-> omap-mcbsp-dai.1 mapping ok
  319. [ 4.340911] asoc: dmic-hifi <-> omap-dmic-abe-dai-0 mapping ok
  320. [ 4.341583] asoc: dmic-hifi <-> omap-dmic-abe-dai-1 mapping ok
  321. [ 4.342224] asoc: dmic-hifi <-> omap-dmic-abe-dai-2 mapping ok
  322. [ 4.345916] input: Panda Headset Jack as /devices/platform/soc-audio.0/sound/card0/input0
  323. [ 4.349975] Error: Driver 'hdmi-audio-dai' is already registered, aborting...
  324. [ 4.349975] OMAP4 HDMI audio SoC init
  325. [ 4.350433] asoc: omap4-hdmi-audio-codec <-> hdmi-audio-dai mapping ok
  326. [ 4.351623] ALSA device list:
  327. [ 4.351684] #0: TI OMAP4 Board
  328. [ 4.351684] #1: TI OMAP4 HDMI Board
  329. [ 4.351684] oprofile: hardware counters not available
  330. [ 4.351684] oprofile: using timer interrupt.
  331. [ 4.432983] TCP cubic registered
  332. [ 4.436431] Initializing XFRM netlink socket
  333. [ 4.440429] NET: Registered protocol family 17
  334. [ 4.440979] NET: Registered protocol family 15
  335. [ 4.450347] Bluetooth: RFCOMM TTY layer initialized
  336. [ 4.455535] Bluetooth: RFCOMM socket layer initialized
  337. [ 4.461059] Bluetooth: RFCOMM ver 1.11
  338. [ 4.463928] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  339. [ 4.471374] lib80211: common routines for IEEE802.11 drivers
  340. [ 4.477355] Registering the dns_resolver key type
  341. [ 4.482360] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
  342. [ 4.490447] ThumbEE CPU extension supported.
  343. [ 4.494934] Registering SWP/SWPB emulation handler
  344. [ 4.500518] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-1.1, smsc95xx USB 2.0 Ethernet, 2e:40:78:c5:6c:0a
  345. [ 4.513275] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva
  346. [ 4.520507] omap2_set_init_voltage: Unable to put vdd_iva to its init voltage
  347. [ 4.520507]
  348. [ 4.530242] Power Management for TI OMAP4.
  349. [ 4.534667] sr_init: No PMIC hook to init smartreflex
  350. [ 4.540039] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
  351. [ 4.548339] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
  352. [ 4.548339] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized
  353. [ 4.564941] SmartReflex Class3 initialized
  354. [ 4.577484] regulator_init_complete: VANA: incomplete constraints, leaving on
  355. [ 4.585327] regulator_init_complete: CLK32KG: incomplete constraints, leaving on
  356. [ 4.594055] regulator_init_complete: VDAC: incomplete constraints, leaving on
  357. [ 4.601867] regulator_init_complete: VCXIO: incomplete constraints, leaving on
  358. [ 4.611083] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
  359. [ 4.824462] omapdss DISPC error: timeout waiting for EVSYNC
  360. [ 4.830322] omap_vout omap_vout: 'hdmi' Display already enabled
  361. [ 4.836517] omap_vout omap_vout: Buffer Size = 3686400
  362. [ 4.843048] omap_vout omap_vout: : registered and initialized video device 0
  363. [ 4.850433] omap_vout omap_vout: Buffer Size = 3686400
  364. [ 4.856903] omap_vout omap_vout: : registered and initialized video device 1
  365. [ 4.866210] Not enabling generic panel as no connector is detected
  366. [ 4.872924] omapdrm omapdrm.0: could not create connector
  367. [ 5.043945] omapdss DISPC error: timeout waiting for EVSYNC
  368. [ 5.168518] omapdss DISPC error: timeout waiting for EVSYNC
  369. [ 5.394348] omapdss DISPC error: timeout waiting for EVSYNC
  370. [ 5.558441] omapdss DISPC error: timeout waiting for EVSYNC
  371. [ 5.570068] Console: switching to colour frame buffer device 170x48
  372. [ 5.616912] fb0: omapdrm frame buffer device
  373. [ 5.616912] drm: registered panic notifier
  374. [ 5.621398] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  375. [ 5.632598] [drm] No driver support for vblank timestamp query.
  376. [ 5.638793] [drm] Initialized omapdrm 1.0.0 20110403 on minor 0
  377. [ 5.645355] Waiting 3sec before mounting root device...
  378. [ 8.657226] Root-NFS: no NFS server address
  379. [ 8.657409] VFS: Unable to mount root fs via NFS, trying floppy.
  380. [ 8.668609] VFS: Cannot open root device "mmcblk0p2" or unknown-block(2,0)
  381. [ 8.675842] Please append a correct "root=" boot option; here are the available partitions:
  382. [ 8.675842] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)
  383. [ 8.675842] Backtrace:
  384. [ 8.695800] [<c00181bc>] (dump_backtrace+0x0/0x110) from [<c0593770>] (dump_stack+0x18/0x1c)
  385. [ 8.704650] r7:c0794c5c r6:ef1f7000 r5:c0794c5c r4:c081d710
  386. [ 8.704650] [<c0593758>] (dump_stack+0x0/0x1c) from [<c0593800>] (panic+0x8c/0x1c4)
  387. [ 8.718627] [<c0593774>] (panic+0x0/0x1c4) from [<c075deec>] (mount_block_root+0x194/0x240)
  388. [ 8.726593] r3:00000000 r2:ef830000 r1:ef831f40 r0:c06b2ab8
  389. [ 8.733306] [<c075dd58>] (mount_block_root+0x0/0x240) from [<c075e040>] (mount_root+0xa8/0xdc)
  390. [ 8.741912] [<c075df98>] (mount_root+0x0/0xdc) from [<c075e1c8>] (prepare_namespace+0x154/0x1e8)
  391. [ 8.751525] r5:c0794c6c r4:c081bee0
  392. [ 8.751525] [<c075e074>] (prepare_namespace+0x0/0x1e8) from [<c075d380>] (kernel_init+0x134/0x150)
  393. [ 8.764648] r6:c07a6000 r5:c07a67dc r4:c07a67dc
  394. [ 8.767120] [<c075d24c>] (kernel_init+0x0/0x150) from [<c0053628>] (do_exit+0x0/0x74c)
  395. [ 8.777801] r7:00000013 r6:c0053628 r5:c075d24c r4:00000000
  396. [ 8.783660] CPU1: stopping
  397. [ 8.783752] Backtrace:
  398. [ 8.789123] [<c00181bc>] (dump_backtrace+0x0/0x110) from [<c0593770>] (dump_stack+0x18/0x1c)
  399. [ 8.797943] r7:00000000 r6:c07bc530 r5:c07a7ecc r4:00000001
  400. [ 8.797943] [<c0593758>] (dump_stack+0x0/0x1c) from [<c00084c8>] (do_IPI+0x11c/0x12c)
  401. [ 8.806549] [<c00083ac>] (do_IPI+0x0/0x12c) from [<c0597138>] (__irq_svc+0x38/0x114)
  402. [ 8.817871] Exception stack(0xef863f58 to 0xef863fa0)
  403. [ 8.822357] 3f40: c07bc378 00000001
  404. [ 8.830078] 3f60: 00000000 ef862000 ef862000 c081bf44 c059fe54 c07bf924 c07bfa74 411fc092
  405. [ 8.836029] 3f80: 00000000 ef863fac ef863fb0 ef863fa0 c001564c c0015650 60000113 ffffffff
  406. [ 8.844451] r7:ef863f8c r6:fa240100 r5:60000113 r4:c0015650
  407. [ 8.857055] [<c0015624>] (default_idle+0x0/0x30) from [<c0015d20>] (cpu_idle+0xe0/0x114)
  408. [ 8.865539] [<c0015c40>] (cpu_idle+0x0/0x114) from [<c05902ac>] (secondary_start_kernel+0x16c/0x170)
  409. [ 8.871276] r9:411fc092 r8:8000406a r7:c081c084 r6:00000001 r5:ef862000
  410. [ 8.878265] r4:c07ec960
  411. [ 8.878265] [<c0590140>] (secondary_start_kernel+0x0/0x170) from [<8058fdf4>] (0x8058fdf4)
  412. [ 8.886840] r7:c081c084 r6:10c0387d r5:00000015 r4:af86406a
  413. [ 8.893951] panic occurred, switching back to text console
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!