Guest User

Untitled

a guest
Jul 27th, 2022
938
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 4.00 KB | None | 0 0
  1. smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.18.14-zen1-1-zen] (local build)
  2. Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Device Model: WDC WD80EAZZ-00BKLB0
  6. Serial Number: WD-CA0UH5BK
  7. LU WWN Device Id: 5 0014ee 26a1a12e0
  8. Firmware Version: 80.00A80
  9. User Capacity: 8,001,563,222,016 bytes [8.00 TB]
  10. Sector Sizes: 512 bytes logical, 4096 bytes physical
  11. Rotation Rate: 5640 rpm
  12. Form Factor: 3.5 inches
  13. Device is: Not in smartctl database 7.3/5319
  14. ATA Version is: ACS-3 T13/2161-D revision 5
  15. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  16. Local Time is: Wed Jul 27 14:03:21 2022 PDT
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19.  
  20. === START OF READ SMART DATA SECTION ===
  21. SMART overall-health self-assessment test result: PASSED
  22.  
  23. General SMART Values:
  24. Offline data collection status: (0x00) Offline data collection activity
  25. was never started.
  26. Auto Offline Data Collection: Disabled.
  27. Self-test execution status: ( 0) The previous self-test routine completed
  28. without error or no self-test has ever
  29. been run.
  30. Total time to complete Offline
  31. data collection: (16604) seconds.
  32. Offline data collection
  33. capabilities: (0x11) SMART execute Offline immediate.
  34. No Auto Offline data collection support.
  35. Suspend Offline collection upon new
  36. command.
  37. No Offline surface scan supported.
  38. Self-test supported.
  39. No Conveyance Self-test supported.
  40. No Selective Self-test supported.
  41. SMART capabilities: (0x0003) Saves SMART data before entering
  42. power-saving mode.
  43. Supports SMART auto save timer.
  44. Error logging capability: (0x01) Error logging supported.
  45. General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time: ( 2) minutes.
  48. Extended self-test routine
  49. recommended polling time: ( 867) minutes.
  50. SCT capabilities: (0x3035) SCT Status supported.
  51. SCT Feature Control supported.
  52. SCT Data Table supported.
  53.  
  54. SMART Attributes Data Structure revision number: 16
  55. Vendor Specific SMART Attributes with Thresholds:
  56. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  57. 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
  58. 3 Spin_Up_Time 0x0027 253 191 021 Pre-fail Always - 3016
  59. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 69
  60. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  61. 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
  62. 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 769
  63. 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
  64. 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
  65. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 47
  66. 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 21
  67. 193 Load_Cycle_Count 0x0032 198 198 000 Old_age Always - 6688
  68. 194 Temperature_Celsius 0x0022 105 101 000 Old_age Always - 47
  69. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  70. 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
  71. 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
  72. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
  73. 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
  74.  
  75. SMART Error Log Version: 1
  76. No Errors Logged
  77.  
  78. SMART Self-test log structure revision number 1
  79. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  80.  
  81. Selective Self-tests/Logging not supported
Advertisement
Add Comment
Please, Sign In to add comment