TSS - Working on LSCSD Caprice (#2)

★ Cletus Taylor steps towards the lift, pressing and holding the raise button until the lift goes all the --
★ way up and locks itself into position.      ((Cletus Taylor))
★ Cletus Taylor grips the oil drain pan, proceeding to roll it underneath the Caprice.
★ Cletus Taylor steps over towards the rolling Snap-On toolbox, proceeding to roll it over underneath ---
★ the lift, then sets the brakes.      ((Cletus Taylor))
★ Cletus Taylor grabs ahold of an adjustable wrench, proceeding to reach up towards the Caprice's oil pan --
★ locating the drain plug; continuing to unscrew it with the wrench.      ((Cletus Taylor))
★ The remaining oil would drain out through the drain port, filling the drain pan.      ((Cletus Taylor))
★ Cletus Taylor allows the oil time to completely drain, then rolls the drain pan aside.
★ Cletus Taylor steps back underneath the Caprice, proceeding to swap the adjustable wrench for ---
★ an adjustable oil filter wrench.      ((Cletus Taylor))
★ Cletus Taylor connects the wrench to the filter, adjusting it to size; then twists it to the left.
★ Cletus Taylor places the filter wrench aside, proceeding to grip the filter; twisting it to the left ---
★ a few times, disconnecting it.      ((Cletus Taylor))
★ Cletus Taylor walks over towards the drain pan, turning the filter upside down; draining the oil from it.
★ Cletus Taylor places the filter on the pan, then walks away.
★ Cletus Taylor steps back towards the lift, taking hold of a ratchet and the appropriately sized ---
★ socket, proceeding to connect the socket to the ratchet.      ((Cletus Taylor))
★ Cletus Taylor reaches up towards the oil pan, proceeding to unbolt the bolts holding the oil-cooler lines
★ --- to the oil pan.      ((Cletus Taylor))
★ Cletus Taylor places the bolts on the lift, proceeding to carefulyl disconnect the oil cooler lines ---
★ allowing them to hang aside.      ((Cletus Taylor))
★ Cletus Taylor then reaches over towards the oil pan, proceeding to unbolt each of the bolts holding ---
★ the pan to the engine block.      ((Cletus Taylor))
★ Cletus Taylor gathers each bolt up, proceeding to place them aside; then grips the oil pan itself ---
★ carefully pulling it down, seperating it from the block.      ((Cletus Taylor))
★ Cletus Taylor places the oil pan ontop of the toolbox, proceeding to place the bolts inside of it for ---
★ temporary safekeeping.      ((Cletus Taylor))
★ Cletus Taylor places the ratchet aside, proceeding to look at the oilpan.
★ Cletus would easily spot the gasket has warped in some places, seperating from the pan.      ((Cletus Taylor))
★ Cletus Taylor grips the gasket, carefully peeling it from the pan; then places it aside.
★ Cletus Taylor opens a drawer on the toolbox, taking hold of a roll of emery cloth; tearing a piece off.
★ Cletus Taylor reaches towards the oil pan, gently scrubbing away any remaining pieces of the gasket.
★ Cletus Taylor wipes over the surface with his hand, insuring all pieces are gone; then does the same ---
★ to the bottom of the Caprice's engine block.      ((Cletus Taylor))
★ Cletus Taylor places the cloth back into the drawer, shutting it.
★ Cletus Taylor reaches into the mail slot, taking hold of the small packagel then walks into the garage.
★ Cletus Taylor places the package onto the hood, proceeding to withdraw a boxcutter, cutting it open.
* Cletus Taylor dropped a ACDelco Genuine GM Parts Oil Pan Gasket (2015-2017 Chevrolet Caprice 6.0 V8). *
★ Cletus Taylor slides the wrapped-up gasket out, proceeding to tear the plastic open; examining it.
★ Cletus Taylor places the gasket down.
★ Cletus Taylor approaches the lift, pressing the lift button
★ Cletus Taylor walks over towards the toolbox, taking hold of the Caprice's oil pan; then walking ---
★ over towards the toolbox.      ((Cletus Taylor))
★ Cletus Taylor places the oil pan onto the toolbox, proceeding to take hold of the gasket; carefully ---
★ placing it into the pan; lining it up properly.      ((Cletus Taylor))
★ Cletus Taylor takes hold of each bolt from the pan, placing them into his pocket; then walks over ---
★ a couple steps, taking hold of the pan.      ((Cletus Taylor))
★ Cletus Taylor walks over towards the Caprice, proceeding to lift the oil pan into position.
★ Cletus Taylor grips each bolt from his pocket, one-by-one twisting them into their holes by hand.
★ Cletus Taylor walks over towards the laptop, turning it on.
★ Cletus Taylor clicks on the database of shop manuals, proceeding to look up the Caprice's oil ---
★ pan torque specs, then walks over towards the toolbox.      ((Cletus Taylor))
★ Cletus Taylor grips the torque wrench, proceeding to step back underneath the Caprice.
★ Cletus Taylor clicks the torque specs into the wrench, proceeding to tighten down each of the ---
★ Caprice's oil pan bolts until the torque wrench clicks.      ((Cletus Taylor))
★ Cletus Taylor places the wrench aside, proceeding to walk towards the storage cabinet.
★ Cletus Taylor opens the cabinet, proceeding to take hold of a new oil filter and a large bottle of oil.
★ Cletus Taylor places both items onto the toolbox, proceeding to then open the filter's box.
★ Cletus Taylor slips the filter out, then grips the oil filter wrench.
★ Cletus Taylor reaches up, proceeding to hand-thread the filter; then wraps the oil filter wrench around --
★ the filter, tightening it down.      ((Cletus Taylor))
★ Cletus Taylor grips the toolbox, rolling it aside.
★ Cletus Taylor presses the down button on the lift, holding it until the lift completely goes down.
★ Cletus Taylor grips the unlatched hood, lifting it back up.
★ Cletus Taylor grabs ahold of the oil cap, proceeding to twist it off, placing it ontop of the plastic engine cover.      ((Cletus Taylor))
★ Cletus Taylor grips the large jug of oil, proceeding to uncap it; then turns towards the Caprice.
★ Cletus Taylor turns the jug up, pouring the proper amount of oil into the engine; then puts the ---
★ cap back onto the bottle, placing it aside.      ((Cletus Taylor))
★ Cletus Taylor turns towards the Caprice, proceeding to grip the dip stick, pulling it out.
★ Cletus Taylor checks the level, insuring it's filled properly, then presses the stick back in.
★ Cletus Taylor grips the cap, twisting it back on.
★ Cletus Taylor grips the hood, closing it.