API tools faq
paste
Advertisement
Guest User

dmesg r4s

a guest
May 8th, 2021
70
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 35.26 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  2. [ 0.000000] Linux version 5.4.114 (runner@fv-az234-554) (gcc version 9.3.0 (OpenWrt GCC 9.3.0 r16060-701d25b551)) #0 SMP PREEMPT Mon May 3 12:57:29 2021
  3. [ 0.000000] Machine model: FriendlyElec NanoPi R4S
  4. [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
  5. [ 0.000000] printk: bootconsole [uart8250] enabled
  6. [ 0.000000] cma: Reserved 8 MiB at 0x00000000f7800000
  7. [ 0.000000] On node 0 totalpages: 1015296
  8. [ 0.000000] DMA32 zone: 15864 pages used for memmap
  9. [ 0.000000] DMA32 zone: 0 pages reserved
  10. [ 0.000000] DMA32 zone: 1015296 pages, LIFO batch:63
  11. [ 0.000000] psci: probing for conduit method from DT.
  12. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  13. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  14. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  15. [ 0.000000] psci: SMC Calling Convention v1.0
  16. [ 0.000000] percpu: Embedded 21 pages/cpu s47384 r8192 d30440 u86016
  17. [ 0.000000] pcpu-alloc: s47384 r8192 d30440 u86016 alloc=21*4096
  18. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
  19. [ 0.000000] Detected VIPT I-cache on CPU0
  20. [ 0.000000] CPU features: detected: ARM erratum 845719
  21. [ 0.000000] CPU features: detected: GIC system register CPU interface
  22. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432
  23. [ 0.000000] Kernel command line: console=ttyS2,1500000 earlycon=uart8250,mmio32,0xff1a0000 root=PARTUUID=5452574f-02 rw rootwait
  24. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  25. [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  26. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  27. [ 0.000000] Memory: 3958780K/4061184K available (7998K kernel code, 668K rwdata, 2532K rodata, 1728K init, 715K bss, 94212K reserved, 8192K cma-reserved)
  28. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  29. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  30. [ 0.000000] rcu: RCU event tracing is enabled.
  31. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
  32. [ 0.000000] Tasks RCU enabled.
  33. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  34. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
  35. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  36. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  37. [ 0.000000] GICv3: 256 SPIs implemented
  38. [ 0.000000] GICv3: 0 Extended SPIs implemented
  39. [ 0.000000] GICv3: Distributor has no Range Selector support
  40. [ 0.000000] GICv3: 16 PPIs implemented
  41. [ 0.000000] GICv3: no VLPI support, no direct LPI support
  42. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
  43. [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
  44. [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f2080000 (flat, esz 8, psz 64K, shr 0)
  45. [ 0.000000] ITS: using cache flushing for cmd queue
  46. [ 0.000000] GICv3: using LPI property table @0x00000000f2040000
  47. [ 0.000000] GIC: using cache flushing for LPI property table
  48. [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000f2050000
  49. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
  50. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
  51. [ 0.000000] random: get_random_bytes called from start_kernel+0x298/0x388 with crng_init=0
  52. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  53. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  54. [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  55. [ 0.001896] Console: colour dummy device 80x25
  56. [ 0.002362] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  57. [ 0.003340] pid_max: default: 32768 minimum: 301
  58. [ 0.003960] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  59. [ 0.004684] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  60. [ 0.007080] ASID allocator initialised with 32768 entries
  61. [ 0.007691] rcu: Hierarchical SRCU implementation.
  62. [ 0.008408] Platform MSI: interrupt-controller@fee20000 domain created
  63. [ 0.009389] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  64. [ 0.010794] smp: Bringing up secondary CPUs ...
  65. [ 0.011764] Detected VIPT I-cache on CPU1
  66. [ 0.011801] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
  67. [ 0.011818] GICv3: CPU1: using allocated LPI pending table @0x00000000f2060000
  68. [ 0.011865] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  69. [ 0.012478] Detected VIPT I-cache on CPU2
  70. [ 0.012505] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
  71. [ 0.012519] GICv3: CPU2: using allocated LPI pending table @0x00000000f2070000
  72. [ 0.012552] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  73. [ 0.013139] Detected VIPT I-cache on CPU3
  74. [ 0.013165] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
  75. [ 0.013178] GICv3: CPU3: using allocated LPI pending table @0x00000000f2100000
  76. [ 0.013208] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  77. [ 0.013773] CPU features: detected: EL2 vector hardening
  78. [ 0.013781] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
  79. [ 0.013790] Detected PIPT I-cache on CPU4
  80. [ 0.013820] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
  81. [ 0.013833] GICv3: CPU4: using allocated LPI pending table @0x00000000f2110000
  82. [ 0.013868] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
  83. [ 0.014517] Detected PIPT I-cache on CPU5
  84. [ 0.014542] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
  85. [ 0.014555] GICv3: CPU5: using allocated LPI pending table @0x00000000f2120000
  86. [ 0.014583] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
  87. [ 0.014678] smp: Brought up 1 node, 6 CPUs
  88. [ 0.027807] SMP: Total of 6 processors activated.
  89. [ 0.028258] CPU features: detected: 32-bit EL0 Support
  90. [ 0.028749] CPU features: detected: CRC32 instructions
  91. [ 0.041003] CPU: All CPU(s) started at EL2
  92. [ 0.041434] alternatives: patching kernel code
  93. [ 0.055713] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  94. [ 0.056675] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
  95. [ 0.057705] pinctrl core: initialized pinctrl subsystem
  96. [ 0.058856] NET: Registered protocol family 16
  97. [ 0.061571] DMA: preallocated 2048 KiB pool for atomic allocations
  98. [ 0.063093] cpuidle: using governor menu
  99. [ 0.063583] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  100. [ 0.064457] Serial: AMBA PL011 UART driver
  101. [ 0.091553] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  102. [ 0.092214] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  103. [ 0.092868] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  104. [ 0.093523] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  105. [ 0.098428] cryptd: max_cpu_qlen set to 1000
  106. [ 0.108636] iommu: Default domain type: Translated
  107. [ 0.110782] SCSI subsystem initialized
  108. [ 0.111343] usbcore: registered new interface driver usbfs
  109. [ 0.111909] usbcore: registered new interface driver hub
  110. [ 0.112464] usbcore: registered new device driver usb
  111. [ 0.113627] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
  112. [ 0.115186] clocksource: Switched to clocksource arch_sys_counter
  113. [ 0.115874] VFS: Disk quotas dquot_6.6.0
  114. [ 0.116308] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  115. [ 0.120127] thermal_sys: Registered thermal governor 'step_wise'
  116. [ 0.120131] thermal_sys: Registered thermal governor 'power_allocator'
  117. [ 0.121225] NET: Registered protocol family 2
  118. [ 0.122686] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
  119. [ 0.123609] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
  120. [ 0.124719] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
  121. [ 0.126089] TCP: Hash tables configured (established 32768 bind 32768)
  122. [ 0.126841] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
  123. [ 0.127637] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
  124. [ 0.128609] NET: Registered protocol family 1
  125. [ 0.129060] PCI: CLS 0 bytes, default 64
  126. [ 0.130233] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  127. [ 0.131419] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  128. [ 0.139806] workingset: timestamp_bits=62 max_order=20 bucket_order=0
  129. [ 0.145512] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  130. [ 0.146084] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  131. [ 0.171422] NET: Registered protocol family 38
  132. [ 0.172028] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  133. [ 0.172750] io scheduler mq-deadline registered
  134. [ 0.179944] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
  135. [ 0.180588] vcc5v0_sys: supplied by vdd_5v
  136. [ 0.181040] vcc3v3_sys: supplied by vcc5v0_sys
  137. [ 0.181562] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
  138. [ 0.182196] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
  139. [ 0.207296] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
  140. [ 0.208001] rockchip-pcie f8000000.pcie: MEM 0xfa000000..0xfbdfffff -> 0xfa000000
  141. [ 0.208756] rockchip-pcie f8000000.pcie: IO 0xfbe00000..0xfbefffff -> 0xfbe00000
  142. [ 0.209771] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
  143. [ 0.210421] pci_bus 0000:00: root bus resource [bus 00-1f]
  144. [ 0.210960] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
  145. [ 0.211655] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
  146. [ 0.212614] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
  147. [ 0.213320] pci 0000:00:00.0: supports D1
  148. [ 0.213715] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  149. [ 0.218640] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  150. [ 0.219600] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
  151. [ 0.220294] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid
  152. [ 0.220983] pci 0000:01:00.0: reg 0x10: [io size 0x0100]
  153. [ 0.221587] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
  154. [ 0.222298] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]
  155. [ 0.223009] pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256)
  156. [ 0.223876] pci 0000:01:00.0: Max Payload Size set to 128 (was 128, max 128)
  157. [ 0.224901] pci 0000:01:00.0: supports D1 D2
  158. [ 0.225321] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  159. [ 0.239354] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01
  160. [ 0.240020] pci 0000:00:00.0: BAR 8: assigned [mem 0xfa000000-0xfa0fffff]
  161. [ 0.240690] pci 0000:01:00.0: BAR 4: assigned [mem 0xfa000000-0xfa003fff 64bit]
  162. [ 0.241443] pci 0000:01:00.0: BAR 2: assigned [mem 0xfa004000-0xfa004fff 64bit]
  163. [ 0.242194] pci 0000:01:00.0: BAR 0: no space for [io size 0x0100]
  164. [ 0.242807] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0100]
  165. [ 0.243465] pci 0000:00:00.0: PCI bridge to [bus 01]
  166. [ 0.243957] pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff]
  167. [ 0.244754] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
  168. [ 0.245566] pcieport 0000:00:00.0: PME: Signaling with IRQ 222
  169. [ 0.246389] pcieport 0000:00:00.0: AER: enabled with IRQ 222
  170. [ 0.248892] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
  171. [ 0.249636] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
  172. [ 0.251582] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
  173. [ 0.252325] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  174. [ 0.254829] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  175. [ 0.256710] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 37, base_baud = 1500000) is a 16550A
  176. [ 0.257691] serial serial0: tty port ttyS0 registered
  177. [ 0.258550] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 38, base_baud = 1500000) is a 16550A
  178. [ 0.259582] printk: console [ttyS2] enabled
  179. [ 0.260357] printk: bootconsole [uart8250] disabled
  180. [ 0.262618] cacheinfo: Unable to detect cache hierarchy for CPU 0
  181. [ 0.267210] loop: module loaded
  182. [ 0.267496] mtip32xx Version 1.3.1
  183. [ 0.269559] libphy: Fixed MDIO Bus: probed
  184. [ 0.270869] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
  185. [ 0.271479] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
  186. [ 0.272123] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
  187. [ 0.272684] rk_gmac-dwmac fe300000.ethernet: phy regulator is not available yet, deferred probing
  188. [ 0.285459] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  189. [ 0.286036] ehci-platform: EHCI generic platform driver
  190. [ 0.288678] ehci-platform fe380000.usb: EHCI Host Controller
  191. [ 0.289199] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
  192. [ 0.289982] ehci-platform fe380000.usb: irq 29, io mem 0xfe380000
  193. [ 0.303189] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
  194. [ 0.304154] hub 1-0:1.0: USB hub found
  195. [ 0.304515] hub 1-0:1.0: 1 port detected
  196. [ 0.305246] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: Requested PHY is disabled
  197. [ 0.305938] ehci-platform fe3c0000.usb: EHCI Host Controller
  198. [ 0.306448] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
  199. [ 0.307236] ehci-platform fe3c0000.usb: irq 31, io mem 0xfe3c0000
  200. [ 0.323185] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
  201. [ 0.324094] hub 2-0:1.0: USB hub found
  202. [ 0.324448] hub 2-0:1.0: 1 port detected
  203. [ 0.325235] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  204. [ 0.325795] ohci-platform: OHCI generic platform driver
  205. [ 0.326410] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
  206. [ 0.327010] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
  207. [ 0.327797] ohci-platform fe3a0000.usb: irq 30, io mem 0xfe3a0000
  208. [ 0.391573] hub 3-0:1.0: USB hub found
  209. [ 0.391933] hub 3-0:1.0: 1 port detected
  210. [ 0.392651] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: Requested PHY is disabled
  211. [ 0.393341] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
  212. [ 0.393941] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
  213. [ 0.394717] ohci-platform fe3e0000.usb: irq 32, io mem 0xfe3e0000
  214. [ 0.459572] hub 4-0:1.0: USB hub found
  215. [ 0.459931] hub 4-0:1.0: 1 port detected
  216. [ 0.461133] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  217. [ 0.461633] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
  218. [ 0.462426] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
  219. [ 0.463309] xhci-hcd xhci-hcd.0.auto: irq 223, io mem 0xfe800000
  220. [ 0.464350] hub 5-0:1.0: USB hub found
  221. [ 0.464706] hub 5-0:1.0: 1 port detected
  222. [ 0.465293] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  223. [ 0.465786] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
  224. [ 0.466465] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
  225. [ 0.467087] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
  226. [ 0.468161] hub 6-0:1.0: USB hub found
  227. [ 0.468517] hub 6-0:1.0: 1 port detected
  228. [ 0.469230] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  229. [ 0.469726] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
  230. [ 0.470522] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
  231. [ 0.471394] xhci-hcd xhci-hcd.1.auto: irq 224, io mem 0xfe900000
  232. [ 0.472441] hub 7-0:1.0: USB hub found
  233. [ 0.472795] hub 7-0:1.0: 1 port detected
  234. [ 0.473378] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  235. [ 0.473872] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
  236. [ 0.474550] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
  237. [ 0.475190] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
  238. [ 0.476248] hub 8-0:1.0: USB hub found
  239. [ 0.476603] hub 8-0:1.0: 1 port detected
  240. [ 0.477355] usbcore: registered new interface driver usb-storage
  241. [ 0.478031] i2c /dev entries driver
  242. [ 0.480601] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
  243. [ 0.482472] vcc3v0_sd: supplied by vcc3v3_sys
  244. [ 0.482906] vdd_cpu_b: supplied by vcc3v3_sys
  245. [ 0.483892] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
  246. [ 0.485707] vdd_gpu: supplied by vcc3v3_sys
  247. [ 0.486607] rk808 0-001b: chip id: 0x0
  248. [ 0.490882] rk808-regulator rk808-regulator: there is no dvs0 gpio
  249. [ 0.491466] rk808-regulator rk808-regulator: there is no dvs1 gpio
  250. [ 0.492735] vdd_center: supplied by vcc3v3_sys
  251. [ 0.493599] vdd_cpu_l: supplied by vcc3v3_sys
  252. [ 0.494172] vcc_ddr: supplied by vcc3v3_sys
  253. [ 0.495060] vcc_1v8: supplied by vcc3v3_sys
  254. [ 0.496630] vcc1v8_cam: supplied by vcc3v3_sys
  255. [ 0.497892] vcc3v0_touch: supplied by vcc3v3_sys
  256. [ 0.499337] vcc1v8_pmupll: supplied by vcc3v3_sys
  257. [ 0.500779] vcc_sdio: supplied by vcc3v3_sys
  258. [ 0.502034] vcca3v0_codec: supplied by vcc3v3_sys
  259. [ 0.503496] vcc_1v5: supplied by vcc3v3_sys
  260. [ 0.504751] vcca1v8_codec: supplied by vcc3v3_sys
  261. [ 0.506198] vcc_3v0: supplied by vcc3v3_sys
  262. [ 0.506793] vcc3v3_s3: supplied by vcc3v3_sys
  263. [ 0.507402] vcc3v3_s0: supplied by vcc3v3_sys
  264. [ 0.510944] rk808-rtc rk808-rtc: registered as rtc0
  265. [ 0.515804] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 1 >= em_cap_state0
  266. [ 0.520795] sdhci: Secure Digital Host Controller Interface driver
  267. [ 0.521342] sdhci: Copyright(c) Pierre Ossman
  268. [ 0.521727] Synopsys Designware Multimedia Card Interface Driver
  269. [ 0.522998] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
  270. [ 0.523217] random: fast init done
  271. [ 0.523677] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
  272. [ 0.524546] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
  273. [ 0.525098] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
  274. [ 0.526046] dwmmc_rockchip fe320000.dwmmc: Got CD GPIO
  275. [ 0.539387] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  276. [ 0.553352] sdhci-pltfm: SDHCI platform and OF driver helper
  277. [ 0.554830] ledtrig-cpu: registered to indicate activity on CPUs
  278. [ 0.555915] usbcore: registered new interface driver usbhid
  279. [ 0.556400] usbhid: USB HID core driver
  280. [ 0.557548] NET: Registered protocol family 10
  281. [ 0.558334] Segment Routing with IPv6
  282. [ 0.558689] NET: Registered protocol family 17
  283. [ 0.559092] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  284. [ 0.560242] 8021q: 802.1Q VLAN Support v1.8
  285. [ 0.576408] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
  286. [ 0.576988] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
  287. [ 0.577571] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
  288. [ 0.578153] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
  289. [ 0.578769] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
  290. [ 0.579286] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
  291. [ 0.579783] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
  292. [ 0.580343] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
  293. [ 0.580948] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
  294. [ 0.586484] rk_gmac-dwmac fe300000.ethernet: init for RGMII
  295. [ 0.587712] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
  296. [ 0.588342] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
  297. [ 0.588799] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
  298. [ 0.589450] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
  299. [ 0.590102] rk_gmac-dwmac fe300000.ethernet: COE Type 2
  300. [ 0.590557] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
  301. [ 0.591198] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
  302. [ 0.591759] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
  303. [ 0.592275] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
  304. [ 0.592784] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  305. [ 0.606495] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
  306. [ 0.651312] libphy: stmmac: probed
  307. [ 0.656798] rk808-rtc rk808-rtc: setting system clock to 2013-01-18T08:50:09 UTC (1358499009)
  308. [ 0.658657] ttyS2 - failed to request DMA
  309. [ 0.659071] Waiting for root device PARTUUID=5452574f-02...
  310. [ 0.876466] dwmmc_rockchip fe320000.dwmmc: Successfully tuned phase to 180
  311. [ 0.877109] mmc0: new ultra high speed SDR104 SDHC card at address 0001
  312. [ 0.879234] mmcblk0: mmc0:0001 GB1QT 29.8 GiB
  313. [ 0.883295] mmcblk0: p1 p2
  314. [ 0.908398] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
  315. [ 0.909906] Freeing unused kernel memory: 1728K
  316. [ 0.935378] Run /sbin/init as init process
  317. [ 1.053580] init: Console is alive
  318. [ 1.455771] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  319. [ 1.485845] Key type encrypted registered
  320. [ 1.490416] ANTFS Module: Version 07.19-b41ba529
  321. [ 1.491793] raid6: using algorithm neonx8 gen() 0 MB/s
  322. [ 1.492244] raid6: .... xor() 0 MB/s, rmw enabled
  323. [ 1.492654] raid6: using neon recovery algorithm
  324. [ 1.493769] xor: measuring software checksum speed
  325. [ 1.531253] 8regs : 7957.000 MB/sec
  326. [ 1.571202] 32regs : 9363.000 MB/sec
  327. [ 1.611200] arm64_neon: 8205.000 MB/sec
  328. [ 1.611565] xor: using function: 32regs (9363.000 MB/sec)
  329. [ 1.663489] Btrfs loaded, crc32c=crc32c-generic
  330. [ 1.666644] usbcore: registered new interface driver uas
  331. [ 1.667187] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  332. [ 1.673127] init: - preinit -
  333. [ 1.964102] random: jshn: uninitialized urandom read (4 bytes read)
  334. [ 1.976706] random: jshn: uninitialized urandom read (4 bytes read)
  335. [ 1.995882] random: jshn: uninitialized urandom read (4 bytes read)
  336. [ 5.111378] mount_root: loading kmods from internal overlay
  337. [ 5.120799] kmodloader: loading kernel modules from //etc/modules-boot.d/*
  338. [ 5.122563] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
  339. [ 5.259600] block: attempting to load /etc/config/fstab
  340. [ 5.261792] block: unable to load configuration (fstab: Entry not found)
  341. [ 5.262385] block: no usable configuration
  342. [ 5.412041] F2FS-fs (loop0): Mounted with checkpoint version = 13929227
  343. [ 5.423726] block: attempting to load /etc/config/fstab
  344. [ 5.424237] block: unable to load configuration (fstab: Entry not found)
  345. [ 5.424836] block: no usable configuration
  346. [ 5.425919] mount_root: switching to f2fs overlay
  347. [ 5.521719] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
  348. [ 5.544632] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null)
  349. [ 5.577250] urandom-seed: Seeding with /etc/urandom.seed
  350. [ 5.606666] procd: - early -
  351. [ 5.726357] urandom_read: 3 callbacks suppressed
  352. [ 5.726360] random: jshn: uninitialized urandom read (4 bytes read)
  353. [ 5.775939] random: jshn: uninitialized urandom read (4 bytes read)
  354. [ 5.807323] random: jshn: uninitialized urandom read (4 bytes read)
  355. [ 6.082629] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
  356. [ 6.084967] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts:
  357. [ 6.177520] procd: - ubus -
  358. [ 6.234974] procd: - init -
  359. [ 6.366025] urngd: v1.0.2 started.
  360. [ 6.378450] random: crng init done
  361. [ 6.378752] random: 1 urandom warning(s) missed due to ratelimiting
  362. [ 6.379393] kmodloader: loading kernel modules from /etc/modules.d/*
  363. [ 6.387625] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
  364. [ 6.396503] Key type cifs.idmap registered
  365. [ 6.399602] mpls_gso: MPLS GSO support
  366. [ 6.402182] tun: Universal TUN/TAP device driver, 1.6
  367. [ 6.406775] sctp: Hash tables configured (bind 256/256)
  368. [ 6.408676] nat46: module (version 362640b41ae52b732d9e9729e61ac555492442a3) loaded.
  369. [ 6.443415] Mirror/redirect action on
  370. [ 6.446244] u32 classifier
  371. [ 6.446487] input device check on
  372. [ 6.446807] Actions configured
  373. [ 6.452497] Bridge firewalling registered
  374. [ 6.453252] Loading modules backported from Linux version v5.10.16-0-gde53befa79cf
  375. [ 6.453911] Backport generated by backports.git v5.10.16-1-0-g21d2a1d2
  376. [ 6.455899] usbcore: registered new interface driver ipheth
  377. [ 6.489512] usbcore: registered new interface driver r8152
  378. [ 6.493343] r8168 Gigabit Ethernet driver 8.048.03-NAPI loaded
  379. [ 6.493891] r8168 0000:01:00.0: enabling device (0000 -> 0002)
  380. [ 6.508976] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ether addr 00:00:00:00:00:00
  381. [ 6.509811] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Random ether addr 56:7b:89:fc:5f:f5
  382. [ 6.510974] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
  383. [ 6.513993] r8168 Copyright (C) 2020 Realtek NIC software team <nicfae@realtek.com>
  384. [ 6.513993] This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
  385. [ 6.513993] This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
  386. [ 6.517837] usbcore: registered new interface driver rtl8150
  387. [ 6.520927] usbcore: registered new interface driver ums-alauda
  388. [ 6.521878] usbcore: registered new interface driver ums-cypress
  389. [ 6.522823] usbcore: registered new interface driver ums-datafab
  390. [ 6.523784] usbcore: registered new interface driver ums-freecom
  391. [ 6.524731] usbcore: registered new interface driver ums-isd200
  392. [ 6.525591] usbcore: registered new interface driver ums-jumpshot
  393. [ 6.526478] usbcore: registered new interface driver ums-karma
  394. [ 6.527470] usbcore: registered new interface driver ums-sddr09
  395. [ 6.528384] usbcore: registered new interface driver ums-sddr55
  396. [ 6.529230] usbcore: registered new interface driver ums-usbat
  397. [ 6.543845] xt_time: kernel timezone is -0000
  398. [ 6.544980] usbcore: registered new interface driver asix
  399. [ 6.546056] usbcore: registered new interface driver ax88179_178a
  400. [ 6.547276] usbcore: registered new interface driver cdc_ether
  401. [ 6.574576] usbcore: registered new interface driver mt7601u
  402. [ 6.580011] usbcore: registered new interface driver mt76x2u
  403. [ 6.582271] PPP generic driver version 2.4.2
  404. [ 6.583176] NET: Registered protocol family 24
  405. [ 6.584197] usbcore: registered new interface driver rndis_host
  406. [ 6.586185] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
  407. [ 6.586869] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
  408. [ 6.588947] kmodloader: done loading kernel modules from /etc/modules.d/*
  409. [ 7.779945] kmodloader: loading kernel modules from /etc/modules.d/*
  410. [ 7.782197] kmodloader: done loading kernel modules from /etc/modules.d/*
  411. [ 9.986032] xt_FULLCONENAT: RFC3489 Full Cone NAT module
  412. [ 9.986032] xt_FULLCONENAT: Copyright (C) 2018 Chion Tang <tech@chionlab.moe>
  413. [ 10.742694] eth1: 0xffff800010df7000, 68:27:19:a5:0c:0a, IRQ 234
  414. [ 11.111960] br-lan: port 1(eth1) entered blocking state
  415. [ 11.112423] br-lan: port 1(eth1) entered disabled state
  416. [ 11.113004] device eth1 entered promiscuous mode
  417. [ 11.118413] rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet]
  418. [ 11.131195] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found
  419. [ 11.131867] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
  420. [ 11.132462] rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii link mode
  421. [ 26.482567] r8168: eth1: link up
  422. [ 26.483222] br-lan: port 1(eth1) entered blocking state
  423. [ 26.483696] br-lan: port 1(eth1) entered forwarding state
  424. [ 26.484660] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  425. [ 31.715442] vcc1v8_s3: supplied by vcc_1v8
  426. [ 31.715948] vbus_typec: disabling
  427. [ 174.939715] mmc0: card 0001 removed
  428. [ 205.796014] ------------[ cut here ]------------
  429. [ 205.796446] bdi-block not registered
  430. [ 205.796822] WARNING: CPU: 0 PID: 326 at fs/fs-writeback.c:2326 __mark_inode_dirty+0x204/0x238
  431. [ 205.797571] Modules linked in: xt_FULLCONENAT pppoe ppp_async wireguard rndis_host pppox ppp_generic nf_flow_table_ipv6 nf_flow_table_ipv4 nf_flow_table_inet mt76x2u mt76x2_common mt76x02_usb mt76x02_lib mt7601u mt76_usb mt76 mac80211 libchacha20poly1305 libblake2s ipt_REJECT cfg80211 cdc_ether ax88179_178a asix xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_socket xt_recent xt_quota xt_pkttype xt_owner xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_ipv4options xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_addrtype xt_TPROXY xt_TCPMSS xt_REDIRECT xt_NETMAP xt_MASQUERADE xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY usbnet ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda ts_fsm ts_bm tcp_bbr slhc sch_cake rtl8150 r8168 r8152 poly1305_neon nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_objref nft_numgen nft_nat nft_masq
  432. [ 205.797863] nft_log nft_limit nft_hash nft_flow_offload nft_ct nft_counter nft_chain_nat nf_tproxy_ipv6 nf_tproxy_ipv4 nf_tables_set nf_tables nf_socket_ipv6 nf_socket_ipv4 nf_reject_ipv4 nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_pptp nf_nat_irc nf_nat_h323 nf_nat_ftp nf_nat_amanda nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_conntrack_tftp nf_conntrack_snmp nf_conntrack_sip nf_conntrack_pptp nf_conntrack_netlink nf_conntrack_irc nf_conntrack_h323 nf_conntrack_ftp nf_conntrack_broadcast ts_kmp nf_conntrack_amanda nf_conncount libcurve25519_generic libblake2s_generic iptable_raw iptable_nat iptable_mangle iptable_filter ipt_ECN ipheth ip_tables crc_ccitt compat br_netfilter sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred configs i2c_gpio i2c_algo_bit xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac
  433. [ 205.805676] ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6table_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip6t_NPT nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 msdos ifb dummy nat46 sctp netlink_diag tun mpls_iptunnel mpls_router ip_tunnel mpls_gso vfat fat cifs dm_mirror dm_region_hash dm_log dm_crypt dm_mod dax nls_utf8 nls_cp437 vxlan udp_tunnel ip6_udp_tunnel uas gpio_button_hotplug btrfs xor xor_neon raid6_pq antfs encrypted_keys trusted tpm
  434. [ 205.818299] CPU: 0 PID: 326 Comm: loop0 Not tainted 5.4.114 #0
  435. [ 205.818818] Hardware name: FriendlyElec NanoPi R4S (DT)
  436. [ 205.819288] pstate: 40000005 (nZcv daif -PAN -UAO)
  437. [ 205.819724] pc : __mark_inode_dirty+0x204/0x238
  438. [ 205.820135] lr : __mark_inode_dirty+0x204/0x238
  439. [ 205.820539] sp : ffff8000113239f0
  440. [ 205.820838] x29: ffff8000113239f0 x28: 0000000000000001
  441. [ 205.821317] x27: fffffe00039cd540 x26: 0000000000000400
  442. [ 205.821794] x25: 0000000000000000 x24: ffff0000f0ecbc78
  443. [ 205.822272] x23: 0000000000000000 x22: ffff0000f0ecbcd0
  444. [ 205.822750] x21: ffff0000f09f00d8 x20: 0000000000000004
  445. [ 205.823228] x19: ffff0000f0ecbc00 x18: 0000000000000000
  446. [ 205.823705] x17: 0000000000000000 x16: 0000000000000000
  447. [ 205.824183] x15: 0000000000000000 x14: 00001477b047dac4
  448. [ 205.824662] x13: 0000000000000000 x12: ffff800010d31000
  449. [ 205.825140] x11: ffff800010ca2000 x10: 0000000000000010
  450. [ 205.825618] x9 : 0000000000000000 x8 : 6465726574736967
  451. [ 205.826096] x7 : 657220746f6e206b x6 : 00000000000001aa
  452. [ 205.826575] x5 : 0000000000000001 x4 : 0000000000000001
  453. [ 205.827051] x3 : ffff0000f6f69800 x2 : 0000000000000007
  454. [ 205.827530] x1 : ffff0000f1003100 x0 : 0000000000000018
  455. [ 205.828006] Call trace:
  456. [ 205.828240] __mark_inode_dirty+0x204/0x238
  457. [ 205.828621] mark_buffer_dirty+0xac/0xd8
  458. [ 205.828981] __block_commit_write.isra.0+0xcc/0x148
  459. [ 205.829421] block_write_end+0x40/0x98
  460. [ 205.829762] blkdev_write_end+0x14/0x88
  461. [ 205.830116] generic_perform_write+0xf8/0x188
  462. [ 205.830513] __generic_file_write_iter+0x12c/0x1b0
  463. [ 205.830944] blkdev_write_iter+0x8c/0x108
  464. [ 205.831312] do_iter_readv_writev+0x110/0x178
  465. [ 205.831705] do_iter_write+0x88/0x1c8
  466. [ 205.832037] vfs_iter_write+0x18/0x28
  467. [ 205.832373] lo_write_bvec+0x5c/0x118
  468. [ 205.832705] loop_queue_work+0x144/0x9c8
  469. [ 205.833065] kthread_worker_fn+0xac/0x108
  470. [ 205.833428] loop_kthread_worker_fn+0x1c/0x28
  471. [ 205.833822] kthread+0x128/0x148
  472. [ 205.834121] ret_from_fork+0x10/0x1c
  473. [ 205.834446] ---[ end trace be80114c6154539d ]---
  474. [ 205.835350] Buffer I/O error on dev mmcblk0p2, logical block 50112, lost async page write
  475. [ 205.836247] Buffer I/O error on dev mmcblk0p2, logical block 50113, lost async page write
  476. [ 205.836974] Buffer I/O error on dev mmcblk0p2, logical block 50114, lost async page write
  477. [ 205.837716] Buffer I/O error on dev mmcblk0p2, logical block 50115, lost async page write
  478. [ 205.838477] Buffer I/O error on dev mmcblk0p2, logical block 50116, lost async page write
  479. [ 205.839259] Buffer I/O error on dev mmcblk0p2, logical block 50117, lost async page write
  480. [ 205.839999] Buffer I/O error on dev mmcblk0p2, logical block 50118, lost async page write
  481. [ 205.840729] Buffer I/O error on dev mmcblk0p2, logical block 50119, lost async page write
  482. [ 205.841489] Buffer I/O error on dev mmcblk0p2, logical block 69016, lost async page write
  483. [ 205.842222] Buffer I/O error on dev mmcblk0p2, logical block 69017, lost async page write
  484. [ 205.843027] blk_update_request: I/O error, dev loop0, sector 4112 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
  485. [ 456.790067] SQUASHFS error: squashfs_read_data failed to read block 0x270c1ce
  486. [ 456.790698] SQUASHFS error: Unable to read fragment cache entry [270c1ce]
  487. [ 456.791327] SQUASHFS error: Unable to read page, block 270c1ce, size ee58
  488. [ 456.791923] SQUASHFS error: Unable to read fragment cache entry [270c1ce]
  489. [ 456.792515] SQUASHFS error: Unable to read page, block 270c1ce, size ee58
  490. [ 456.793112] SQUASHFS error: Unable to read fragment cache entry [270c1ce]
  491. [ 456.793703] SQUASHFS error: Unable to read page, block 270c1ce, size ee58
  492. [ 456.794298] SQUASHFS error: Unable to read fragment cache entry [270c1ce]
  493. [ 456.794888] SQUASHFS error: Unable to read page, block 270c1ce, size ee58
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!