API tools faq
paste
Guest User

Untitled

a guest
Mar 20th, 2023
656
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 65.12 KB | None | 0 0
raw download clone embed print report
  1. PCI0 is not defined in the device tree
  2. PCI Link Intialized
  3. PCI Link Intialized
  4. In: serial@78B1000
  5. Out: serial@78B1000
  6. Err: serial@78B1000
  7. machid: 8050301
  8. MMC Device 0 not found
  9. Hit any key to stop autoboot: 0
  10. SPI_ADDR_LEN=3
  11. SF: Detected MX25U25635F with page size 256 Bytes, erase size 64 KiB, total 32 MiB
  12. device 0 offset 0x720000, size 0x80000
  13. SF: 524288 bytes @ 0x720000 Read: OK
  14. CRC check good on phy fw file (0x03CF)
  15. PHYFW:Loading IRAM...........done.
  16. PHYFW:Loading DRAM..............done.
  17. phy fw image load good CRC-16 matches (0x1DFF)
  18. SPI_ADDR_LEN=3
  19. SF: Detected MX25U25635F with page size 256 Bytes, erase size 64 KiB, total 32 MiB
  20. device 0 offset 0x720000, size 0x80000
  21. SF: 524288 bytes @ 0x720000 Read: OK
  22. CRC check good on phy fw file (0x03CF)
  23. PHYFW:Loading IRAM...........done.
  24. PHYFW:Loading DRAM..............done.
  25. phy fw image load good CRC-16 matches (0x1DFF)
  26. ubi0: attaching mtd2
  27. ubi0: scanning is finished
  28. ubi0: attached mtd2 (name "mtd=0", size 60 MiB)
  29. ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  30. ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  31. ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  32. ubi0: good PEBs: 480, bad PEBs: 0, corrupted PEBs: 0
  33. ubi0: user volume: 4, internal volumes: 1, max. volumes count: 128
  34. ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1056256787
  35. ubi0: available PEBs: 0, total reserved PEBs: 480, PEBs reserved for bad PEB handling: 40
  36. Read 0 bytes from volume kernel to 44000000
  37. No size specified -> Using max size (5724604)
  38. ## Loading kernel from FIT Image at 44000000 ...
  39. Using 'config@al02-c4' configuration
  40. Trying 'kernel@1' kernel subimage
  41. Description: ARM OpenWrt Linux-5.4.164
  42. Type: Kernel Image
  43. Compression: lzma compressed
  44. Data Start: 0x440000e4
  45. Data Size: 3456702 Bytes = 3.3 MiB
  46. Architecture: ARM
  47. OS: Linux
  48. Load Address: 0x42008000
  49. Entry Point: 0x42008000
  50. Hash algo: crc32
  51. Hash value: 76a9e727
  52. Hash algo: sha1
  53. Hash value: 099b89722191d49358208c09750ab5037cdf3fb1
  54. Verifying Hash Integrity ... crc32+ sha1+ OK
  55. ## Loading fdt from FIT Image at 44000000 ...
  56. Using 'config@al02-c4' configuration
  57. Trying 'fdt@al02-c4' fdt subimage
  58. Description: ARM OpenWrt ipq9574-alxx device tree blob
  59. Type: Flat Device Tree
  60. Compression: uncompressed
  61. Data Start: 0x44538e78
  62. Data Size: 81418 Bytes = 79.5 KiB
  63. Architecture: ARM
  64. Hash algo: crc32
  65. Hash value: dd69704d
  66. Hash algo: sha1
  67. Hash value: 5ef423cead5b87dc0c3b25d176b90ac6a9aa798b
  68. Verifying Hash Integrity ... crc32+ sha1+ OK
  69. Booting using the fdt blob at 0x44538e78
  70. Uncompressing Kernel Image ... OK
  71. Loading Device Tree to 484e9000, end 484ffe09 ... OK
  72. Could not find PCI0 in device tree
  73. Using machid 0x8050301 from environment
  74.  
  75. Starting kernel ...
  76.  
  77. [ 0.000000] Booting Linux on physical CPU 0x0
  78. [ 0.000000] Linux version 5.4.164 (yolin@yolin-BM6835-BM6635-BP6335) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r0-22e3d237)) #0 SMP PREEMPT Fri Mar 17 11:14:25 2023
  79. [ 0.000000] CPU: ARMv7 Processor [411fd090] revision 0 (ARMv7), cr=10c0383d
  80. [ 0.000000] CPU: div instructions available: patching division code
  81. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  82. [ 0.000000] OF: fdt: Machine model: Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C4
  83. [ 0.000000] Memory policy: Data cache writealloc
  84. [ 0.000000] Reserved memory: created DMA memory pool at 0x7e000000, size 15 MiB
  85. [ 0.000000] OF: reserved mem: initialized node dma_pool1@1, compatible id shared-dma-pool
  86. [ 0.000000] Reserved memory: created DMA memory pool at 0x7d100000, size 15 MiB
  87. [ 0.000000] OF: reserved mem: initialized node dma_pool2@2, compatible id shared-dma-pool
  88. [ 0.000000] Reserved memory: created DMA memory pool at 0x7c200000, size 15 MiB
  89. [ 0.000000] OF: reserved mem: initialized node dma_pool3@3, compatible id shared-dma-pool
  90. [ 0.000000] psci: probing for conduit method from DT.
  91. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  92. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  93. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  94. [ 0.000000] psci: SMC Calling Convention v1.0
  95. [ 0.000000] percpu: Embedded 15 pages/cpu s32140 r8192 d21108 u61440
  96. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 201611
  97. [ 0.000000] Kernel command line: console=ttyMSM0,115200n8 ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait
  98. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
  99. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
  100. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  101. [ 0.000000] Memory: 795520K/815104K available (6506K kernel code, 357K rwdata, 2212K rodata, 1024K init, 353K bss, 19584K reserved, 0K cma-reserved, 0K highmem)
  102. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  103. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  104. [ 0.000000] Tasks RCU enabled.
  105. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  106. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  107. [ 0.000000] GICv2m: range[mem 0x0b00c000-0x0b00cffc], SPI[640:671]
  108. [ 0.000000] GICv2m: range[mem 0x0b00d000-0x0b00dffc], SPI[672:703]
  109. [ 0.000000] GICv2m: range[mem 0x0b00e000-0x0b00effc], SPI[704:735]
  110. [ 0.000000] random: get_random_bytes called from start_kernel+0x2e0/0x508 with crng_init=0
  111. [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 24.00MHz (virt/virt).
  112. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  113. [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  114. [ 0.000013] Switching to timer-based delay loop, resolution 41ns
  115. [ 0.000246] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  116. [ 0.000256] pid_max: default: 32768 minimum: 301
  117. [ 0.000348] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  118. [ 0.000358] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  119. [ 0.000865] CPU: Testing write buffer coherency: ok
  120. [ 0.000885] CPU0: Spectre v2: using BPIALL workaround
  121. [ 0.001056] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  122. [ 0.001361] Setting up static identity map for 0x42100000 - 0x42100060
  123. [ 0.001425] rcu: Hierarchical SRCU implementation.
  124. [ 0.002817] MSM Memory Dump base table set up
  125. [ 0.002835] MSM Memory Dump apps data table set up
  126. [ 0.002956] smp: Bringing up secondary CPUs ...
  127. [ 0.004516] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  128. [ 0.004524] CPU1: Spectre v2: using BPIALL workaround
  129. [ 0.006208] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  130. [ 0.006216] CPU2: Spectre v2: using BPIALL workaround
  131. [ 0.007886] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  132. [ 0.007894] CPU3: Spectre v2: using BPIALL workaround
  133. [ 0.007999] smp: Brought up 1 node, 4 CPUs
  134. [ 0.008008] SMP: Total of 4 processors activated (192.00 BogoMIPS).
  135. [ 0.008013] CPU: All CPU(s) started in SVC mode.
  136. [ 0.016952] VFP support v0.3: implementor 51 architecture 3 part 40 variant 9 rev 0
  137. [ 0.017142] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  138. [ 0.017155] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  139. [ 0.017233] pinctrl core: initialized pinctrl subsystem
  140. [ 0.017815] NET: Registered protocol family 16
  141. [ 0.018024] DMA: preallocated 256 KiB pool for atomic coherent allocations
  142. [ 0.018621] cpuidle: using governor ladder
  143. [ 0.018642] cpuidle: using governor menu
  144. [ 0.018747] NET: Registered protocol family 42
  145. [ 0.018916] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  146. [ 0.018923] hw-breakpoint: maximum watchpoint size is 8 bytes.
  147. [ 0.026374] qcom,gcc-ipq9574 1800000.gcc: Registered ipq9574 GCC clock provider
  148. [ 0.044762] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
  149. [ 0.044960] qcom,cpr3-npu-regulator a4000.npu-cpr: NPU CPR valid fuse count: 2
  150. [ 0.046203] msm_sps_probe: sps:sps is ready
  151. [ 2.252292] qcom,nsscc-ipq9574 39b00000.nsscc: Registered NSS CC clocks
  152. [ 2.253448] pps_core: LinuxPPS API ver. 1 registered
  153. [ 2.253455] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  154. [ 2.253469] PTP clock support registered
  155. [ 2.254419] s1: supplied by regulator-dummy
  156. [ 2.254631] Advanced Linux Sound Architecture Driver Initialized.
  157. [ 2.254669] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
  158. [ 2.255163] s2: supplied by regulator-dummy
  159. [ 2.255424] clocksource: Switched to clocksource arch_sys_counter
  160. [ 2.255900] s4: supplied by regulator-dummy
  161. [ 2.256307] thermal_sys: Registered thermal governor 'step_wise'
  162. [ 2.256310] thermal_sys: Registered thermal governor 'user_space'
  163. [ 2.257787] NET: Registered protocol family 2
  164. [ 2.257888] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
  165. [ 2.258586] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
  166. [ 2.258609] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
  167. [ 2.258660] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
  168. [ 2.258769] TCP: Hash tables configured (established 8192 bind 8192)
  169. [ 2.258822] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  170. [ 2.258853] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  171. [ 2.258979] NET: Registered protocol family 1
  172. [ 2.259000] PCI: CLS 0 bytes, default 64
  173. [ 2.259402] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
  174. [ 2.260279] Initialise system trusted keyrings
  175. [ 2.260373] workingset: timestamp_bits=14 max_order=18 bucket_order=4
  176. [ 2.263765] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  177. [ 2.263772] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  178. [ 2.280181] Key type asymmetric registered
  179. [ 2.280189] Asymmetric key parser 'x509' registered
  180. [ 2.280870] qcom-qmp-phy 7d000.ssphy: 7d000.ssphy supply vdda-phy not found, using dummy regulator
  181. [ 2.280932] qcom-qmp-phy 7d000.ssphy: 7d000.ssphy supply vdda-pll not found, using dummy regulator
  182. [ 2.281294] qcom-qmp-phy 7d000.ssphy: Registered Qcom-QMP phy
  183. [ 2.281692] qcom-qmp-phy fc000.phy: Registered Qcom-QMP phy
  184. [ 2.282097] qcom-qmp-phy 8c000.phy: Registered Qcom-QMP phy
  185. [ 2.282478] qcom-qmp-phy f4000.phy: Registered Qcom-QMP phy
  186. [ 2.284672] bam-dma-engine 704000.dma: num-channels unspecified in dt
  187. [ 2.284681] bam-dma-engine 704000.dma: num-ees unspecified in dt
  188. [ 2.285372] bam-dma-engine 7884000.dma: qcom,controlled-remotely unspecified
  189. [ 2.286434] bam-dma-engine 7984000.dma: qcom,controlled-remotely unspecified
  190. [ 2.287161] global timer is null
  191. [ 2.287306] CPU: IPQ9574, SoC Version: 1.1
  192. [ 2.287312] OEM_ID: 0, PROD_ID: 0
  193. [ 2.287647] msm_rpm_log_probe: OK
  194. [ 2.292051] TZ SMMU State: SMMU Stage2 Enabled
  195. [ 2.292128] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set
  196. [ 2.293552] 78000.qcom,msm-eud: ttyEUD0 at MMIO 0x0 (irq = 95, base_baud = 0) is a EUD UART
  197. [ 2.293894] License Manager driver registered
  198. [ 2.294030] UBI cores power collapsed successfully
  199. [ 2.294412] msm_serial 78b1000.serial: msm_serial: detected port #0
  200. [ 2.294434] msm_serial 78b1000.serial: uartclk = 1824768
  201. [ 2.294463] 78b1000.serial: ttyMSM0 at MMIO 0x78b1000 (irq = 29, base_baud = 114048) is a MSM
  202. [ 2.294478] msm_serial: console setup on port #0
  203. [ 3.081101] printk: console [ttyMSM0] enabled
  204. [ 3.085973] msm_serial 78b2000.serial: msm_serial: detected port #2
  205. [ 3.090038] msm_serial 78b2000.serial: uartclk = 24000000
  206. [ 3.096134] 78b2000.serial: ttyMSM2 at MMIO 0x78b2000 (irq = 30, base_baud = 1500000) is a MSM
  207. [ 3.101948] msm_serial 78b3000.serial: msm_serial: detected port #1
  208. [ 3.110190] msm_serial 78b3000.serial: uartclk = 24000000
  209. [ 3.116386] 78b3000.serial: ttyMSM1 at MMIO 0x78b3000 (irq = 31, base_baud = 1500000) is a MSM
  210. [ 3.122065] msm_serial: driver initialized
  211. [ 3.130628] random: fast init done
  212. [ 3.134531] random: crng init done
  213. [ 3.135364] brd: module loaded
  214. [ 3.143507] loop: module loaded
  215. [ 3.145407] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0x22
  216. [ 3.147332] nand: ESMT GD5F2GQ5REYIH SPI NAND 2G 4-bit
  217. [ 3.153913] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  218. [ 3.158978] qcom-nandc 79b0000.nand: x4 mode enabled already remotely
  219. [ 3.169087] qcom-nandc 79b0000.nand: Error in reading max io macro clock from dts
  220. [ 3.172948] 4 fixed-partitions partitions found on MTD device qcom_nand.0
  221. [ 3.180407] Creating 4 MTD partitions on "qcom_nand.0":
  222. [ 3.187169] 0x000000000000-0x000000080000 : "0:TRAINING"
  223. [ 3.193017] 0x000000080000-0x0000000c0000 : "0:LICENSE"
  224. [ 3.198368] 0x0000000c0000-0x000003cc0000 : "rootfs"
  225. [ 3.245048] mtd: device 2 (rootfs) set to be root filesystem
  226. [ 3.245265] mtdsplit: no squashfs found in "rootfs"
  227. [ 3.249776] 0x000003cc0000-0x0000078c0000 : "rootfs_1"
  228. [ 3.297416] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
  229. [ 3.297843] spi-nor spi0.0: found mx25u25635f, expected n25q128a11
  230. [ 3.303670] spi-nor spi0.0: mx25u25635f (32768 Kbytes)
  231. [ 3.309598] 21 fixed-partitions partitions found on MTD device spi0.0
  232. [ 3.314624] Creating 21 MTD partitions on "spi0.0":
  233. [ 3.321146] 0x000000000000-0x0000000c0000 : "0:SBL1"
  234. [ 3.326246] 0x0000000c0000-0x0000000d0000 : "0:MIBIB"
  235. [ 3.331413] 0x0000000d0000-0x0000000f0000 : "0:BOOTCONFIG"
  236. [ 3.336390] 0x0000000f0000-0x000000110000 : "0:BOOTCONFIG1"
  237. [ 3.341733] 0x000000110000-0x000000290000 : "0:QSEE"
  238. [ 3.347227] 0x000000290000-0x000000410000 : "0:QSEE_1"
  239. [ 3.352447] 0x000000410000-0x000000420000 : "0:DEVCFG"
  240. [ 3.357399] 0x000000420000-0x000000430000 : "0:DEVCFG_1"
  241. [ 3.362491] 0x000000430000-0x000000440000 : "0:APDP"
  242. [ 3.367968] 0x000000440000-0x000000450000 : "0:APDP_1"
  243. [ 3.372902] 0x000000450000-0x000000490000 : "0:TME"
  244. [ 3.377863] 0x000000490000-0x0000004d0000 : "0:TME_1"
  245. [ 3.382615] 0x0000004d0000-0x0000004f0000 : "0:RPM"
  246. [ 3.387852] 0x0000004f0000-0x000000510000 : "0:RPM_1"
  247. [ 3.392526] 0x000000510000-0x000000520000 : "0:CDT"
  248. [ 3.397759] 0x000000520000-0x000000530000 : "0:CDT_1"
  249. [ 3.402408] 0x000000530000-0x000000540000 : "0:APPSBLENV"
  250. [ 3.407677] 0x000000540000-0x0000005e0000 : "0:APPSBL"
  251. [ 3.413004] 0x0000005e0000-0x000000680000 : "0:APPSBL_1"
  252. [ 3.418076] 0x000000680000-0x000000720000 : "0:ART"
  253. [ 3.423507] 0x000000720000-0x0000007a0000 : "0:ETHPHYFW"
  254. [ 3.428824] libphy: Fixed MDIO Bus: probed
  255. [ 3.653515] qca-mdio 90000.mdio: Could not find phy-reset-gpio
  256. [ 3.653689] libphy: qca_mdio: probed
  257. [ 3.661002] qca-mdio 90000.mdio: qca-mdio driver was registered
  258. [ 3.662120] i2c /dev entries driver
  259. [ 3.672715] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: [email protected]
  260. [ 3.676309] sdhci: Secure Digital Host Controller Interface driver
  261. [ 3.680199] sdhci: Copyright(c) Pierre Ossman
  262. [ 3.686200] sdhci-pltfm: SDHCI platform and OF driver helper
  263. [ 3.695403]
  264. [ 3.695403] Version Rollback Feature Disabled
  265. [ 3.699722] qcom-q6v5-wcss-pil cd00000.remoteproc: unable to acquire memory-region
  266. [ 3.701994] remoteproc remoteproc0: releasing cd00000.remoteproc
  267. [ 3.709589] qcom-q6v5-wcss-pil: probe of cd00000.remoteproc failed with error -22
  268. [ 3.715986] coresight-tmc 6047000.etf: invalid cti data
  269. [ 3.723339] coresight-tmc 6048000.tmc: unable to acquire Q6 ETR memory-region
  270. [ 3.729451] coresight coresight-etm0: CPU0: ETM v4.0 initialized
  271. [ 3.735410] coresight-etm4x 6293000.etm: CPU0: (null) initialized
  272. [ 3.741833] coresight coresight-etm1: CPU1: ETM v4.0 initialized
  273. [ 3.747491] coresight-etm4x 6297000.etm: CPU1: (null) initialized
  274. [ 3.753832] coresight coresight-etm2: CPU2: ETM v4.0 initialized
  275. [ 3.759557] coresight-etm4x 629b000.etm: CPU2: (null) initialized
  276. [ 3.765908] coresight coresight-etm3: CPU3: ETM v4.0 initialized
  277. [ 3.771609] coresight-etm4x 629f000.etm: CPU3: (null) initialized
  278. [ 3.777868] coresight-stm 6002000.stm: coresight-stm : stm_register_device failed, probing deferred
  279. [ 3.783754] OF: graph: no port node found in /soc/cti@6291000
  280. [ 3.792695] OF: graph: no port node found in /soc/cti@6295000
  281. [ 3.798578] OF: graph: no port node found in /soc/cti@6299000
  282. [ 3.804286] OF: graph: no port node found in /soc/cti@629d000
  283. [ 3.810244] OF: graph: no port node found in /soc/csr@6001000
  284. [ 3.815706] coresight-csr 6001000.csr: CSR initialized: coresight-csr
  285. [ 3.822742] NET: Registered protocol family 10
  286. [ 3.828334] Segment Routing with IPv6
  287. [ 3.832157] NET: Registered protocol family 17
  288. [ 3.835902] Bridge firewalling registered
  289. [ 3.840181] 8021q: 802.1Q VLAN Support v1.8
  290. [ 3.844367] Registering SWP/SWPB emulation handler
  291. [ 3.848357] Loading compiled-in X.509 certificates
  292. [ 3.874804] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
  293. [ 3.874970] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0
  294. [ 3.880943] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 2
  295. [ 3.887513] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
  296. [ 3.895173] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
  297. [ 3.902667] cpr3_mem_acc_init: apc: not using memory accelerator regulator
  298. [ 3.911817] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 635000 uV
  299. [ 3.918764] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 752500 uV
  300. [ 3.928744] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 837500 uV
  301. [ 3.938554] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop=1002500 uV
  302. [ 3.948389] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[13]= 612, quot_offset[13]= 0
  303. [ 3.958175] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[13]= 840, quot_offset[13]= 225
  304. [ 3.969024] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[13]= 986, quot_offset[13]= 145
  305. [ 3.979963] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[13]=1248, quot_offset[13]= 260
  306. [ 3.991088] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop
  307. [ 3.991638] qcom,cpr3-npu-regulator a4000.npu-cpr: NPU CPR valid fuse count: 2
  308. [ 4.008712] cpr3_mem_acc_init: npu: not using memory accelerator regulator
  309. [ 4.015725] npu_corner: fused NOM: open-loop= 782500 uV
  310. [ 4.022570] npu_corner: fused TURBO: open-loop= 827500 uV
  311. [ 4.028855] qcom-pcie 10000000.pci: IRQ mdm2ap_e911 not found
  312. [ 4.036641] qcom-pcie 10000000.pci: host bridge /soc/pci@10000000 ranges:
  313. [ 4.039697] qcom-pcie 10000000.pci: IO 0x10200000..0x102fffff -> 0x10200000
  314. [ 4.046477] qcom-pcie 10000000.pci: MEM 0x10300000..0x17ffffff -> 0x10300000
  315. [ 4.276984] qcom-pcie 10000000.pci: Link up
  316. [ 4.277090] qcom-pcie 10000000.pci: PCI host bridge to bus 0002:00
  317. [ 4.279959] pci_bus 0002:00: root bus resource [bus 00-ff]
  318. [ 4.286226] pci_bus 0002:00: root bus resource [io 0x0000-0xfffff] (bus address [0x10200000-0x102fffff])
  319. [ 4.291680] pci_bus 0002:00: root bus resource [mem 0x10300000-0x17ffffff]
  320. [ 4.301339] pci 0002:00:00.0: [17cb:1108] type 01 class 0x060400
  321. [ 4.308107] pci 0002:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
  322. [ 4.314294] pci 0002:00:00.0: PME# supported from D0 D3hot D3cold
  323. [ 4.323491] PCI: bus0: Fast back to back transfers disabled
  324. [ 4.326625] pci 0002:01:00.0: [17cb:1109] type 00 class 0x028000
  325. [ 4.332006] pci 0002:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
  326. [ 4.338309] pci 0002:01:00.0: Max Payload Size set to 256 (was 128, max 256)
  327. [ 4.345146] pci 0002:01:00.0: PME# supported from D0 D3hot D3cold
  328. [ 4.352001] pci 0002:01:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8 GT/s x1 link at 0002:00:00.0 (capable of 15.752 Gb/s with 8 GT/s x2 link)
  329. [ 4.361159] PCI: bus1: Fast back to back transfers disabled
  330. [ 4.371653] pci 0002:00:00.0: BAR 8: assigned [mem 0x10400000-0x105fffff]
  331. [ 4.377018] pci 0002:00:00.0: BAR 9: assigned [mem 0x10600000-0x107fffff 64bit pref]
  332. [ 4.383953] pci 0002:00:00.0: BAR 0: assigned [mem 0x10300000-0x10300fff]
  333. [ 4.391773] pci 0002:00:00.0: BAR 7: assigned [io 0x1000-0x1fff]
  334. [ 4.398457] pci 0002:01:00.0: BAR 0: assigned [mem 0x10400000-0x105fffff 64bit]
  335. [ 4.404566] pci 0002:00:00.0: PCI bridge to [bus 01-ff]
  336. [ 4.411648] pci 0002:00:00.0: bridge window [io 0x1000-0x1fff]
  337. [ 4.416857] pci 0002:00:00.0: bridge window [mem 0x10400000-0x105fffff]
  338. [ 4.423101] pci 0002:00:00.0: bridge window [mem 0x10600000-0x107fffff 64bit pref]
  339. [ 4.429925] PCIe: RC enabled during bootup
  340. [ 4.437722] qcom-pcie 10000000.pci: Received Link up event for RC 0
  341. [ 4.441919] qcom-pcie 20000000.pci: IRQ mdm2ap_e911 not found
  342. [ 4.450388] qcom-pcie 20000000.pci: host bridge /soc/pci@20000000 ranges:
  343. [ 4.453674] qcom-pcie 20000000.pci: IO 0x20200000..0x202fffff -> 0x20200000
  344. [ 4.460449] qcom-pcie 20000000.pci: MEM 0x20300000..0x27ffffff -> 0x20300000
  345. [ 4.686960] qcom-pcie 20000000.pci: Link up
  346. [ 4.687054] qcom-pcie 20000000.pci: PCI host bridge to bus 0003:00
  347. [ 4.689933] pci_bus 0003:00: root bus resource [bus 00-ff]
  348. [ 4.696198] pci_bus 0003:00: root bus resource [mem 0x20300000-0x27ffffff]
  349. [ 4.701665] pci 0003:00:00.0: [17cb:1108] type 01 class 0x060400
  350. [ 4.708532] pci 0003:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
  351. [ 4.714725] pci 0003:00:00.0: PME# supported from D0 D3hot D3cold
  352. [ 4.723890] PCI: bus0: Fast back to back transfers disabled
  353. [ 4.727056] pci 0003:01:00.0: [17cb:1109] type 00 class 0x028000
  354. [ 4.732434] pci 0003:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
  355. [ 4.738735] pci 0003:01:00.0: Max Payload Size set to 256 (was 128, max 256)
  356. [ 4.745584] pci 0003:01:00.0: PME# supported from D0 D3hot D3cold
  357. [ 4.755660] PCI: bus1: Fast back to back transfers disabled
  358. [ 4.758348] pci 0003:00:00.0: BAR 8: assigned [mem 0x20400000-0x205fffff]
  359. [ 4.763719] pci 0003:00:00.0: BAR 9: assigned [mem 0x20600000-0x207fffff 64bit pref]
  360. [ 4.770675] pci 0003:00:00.0: BAR 0: assigned [mem 0x20300000-0x20300fff]
  361. [ 4.778484] pci 0003:00:00.0: BAR 7: no space for [io size 0x1000]
  362. [ 4.785157] pci 0003:00:00.0: BAR 7: failed to assign [io size 0x1000]
  363. [ 4.791246] pci 0003:01:00.0: BAR 0: assigned [mem 0x20400000-0x205fffff 64bit]
  364. [ 4.797883] pci 0003:00:00.0: PCI bridge to [bus 01-ff]
  365. [ 4.805124] pci 0003:00:00.0: bridge window [mem 0x20400000-0x205fffff]
  366. [ 4.810341] pci 0003:00:00.0: bridge window [mem 0x20600000-0x207fffff 64bit pref]
  367. [ 4.817327] PCIe: RC enabled during bootup
  368. [ 4.825109] qcom-pcie 20000000.pci: Received Link up event for RC 0
  369. [ 4.829305] qcom-pcie 18000000.pci: IRQ mdm2ap_e911 not found
  370. [ 4.837762] qcom-pcie 18000000.pci: host bridge /soc/pci@18000000 ranges:
  371. [ 4.841080] qcom-pcie 18000000.pci: IO 0x18200000..0x182fffff -> 0x18200000
  372. [ 4.847857] qcom-pcie 18000000.pci: MEM 0x18300000..0x1fffffff -> 0x18300000
  373. [ 5.076960] qcom-pcie 18000000.pci: Link up
  374. [ 5.077055] qcom-pcie 18000000.pci: PCI host bridge to bus 0004:00
  375. [ 5.079934] pci_bus 0004:00: root bus resource [bus 00-ff]
  376. [ 5.086199] pci_bus 0004:00: root bus resource [mem 0x18300000-0x1fffffff]
  377. [ 5.091665] pci 0004:00:00.0: [17cb:1108] type 01 class 0x060400
  378. [ 5.098532] pci 0004:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
  379. [ 5.104721] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold
  380. [ 5.113872] PCI: bus0: Fast back to back transfers disabled
  381. [ 5.117056] pci 0004:01:00.0: [17cb:1109] type 00 class 0x028000
  382. [ 5.122433] pci 0004:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
  383. [ 5.128735] pci 0004:01:00.0: Max Payload Size set to 256 (was 128, max 256)
  384. [ 5.135582] pci 0004:01:00.0: PME# supported from D0 D3hot D3cold
  385. [ 5.145668] PCI: bus1: Fast back to back transfers disabled
  386. [ 5.148348] pci 0004:00:00.0: BAR 8: assigned [mem 0x18400000-0x185fffff]
  387. [ 5.153720] pci 0004:00:00.0: BAR 9: assigned [mem 0x18600000-0x187fffff 64bit pref]
  388. [ 5.160675] pci 0004:00:00.0: BAR 0: assigned [mem 0x18300000-0x18300fff]
  389. [ 5.168484] pci 0004:00:00.0: BAR 7: no space for [io size 0x1000]
  390. [ 5.175158] pci 0004:00:00.0: BAR 7: failed to assign [io size 0x1000]
  391. [ 5.181246] pci 0004:01:00.0: BAR 0: assigned [mem 0x18400000-0x185fffff 64bit]
  392. [ 5.187882] pci 0004:00:00.0: PCI bridge to [bus 01-ff]
  393. [ 5.195124] pci 0004:00:00.0: bridge window [mem 0x18400000-0x185fffff]
  394. [ 5.200341] pci 0004:00:00.0: bridge window [mem 0x18600000-0x187fffff 64bit pref]
  395. [ 5.207327] PCIe: RC enabled during bootup
  396. [ 5.215109] qcom-pcie 18000000.pci: Received Link up event for RC 0
  397. [ 5.219490] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  398. [ 5.225162] cpu cpu0: _opp_add: OPP not supported by regulators (0)
  399. [ 5.234596] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 24000 KHz
  400. [ 5.241516] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 936000 KHz
  401. [ 5.249436] coresight-tmc 6048000.tmc: unable to acquire Q6 ETR memory-region
  402. [ 5.256170] coresight-tmc 6048000.tmc: invalid cti data
  403. [ 5.263216] sps_register_bam_device: sps:BAM 0x06064000 is registered
  404. [ 5.268451] coresight coresight-stm: STM32 initialized
  405. [ 5.274900] ubi0: attaching mtd2
  406. [ 5.482564] ubi0: scanning is finished
  407. [ 5.486780] ubi0: attached mtd2 (name "rootfs", size 60 MiB)
  408. [ 5.486790] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  409. [ 5.491482] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  410. [ 5.498172] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  411. [ 5.505023] ubi0: good PEBs: 480, bad PEBs: 0, corrupted PEBs: 0
  412. [ 5.511797] ubi0: user volume: 4, internal volumes: 1, max. volumes count: 128
  413. [ 5.518048] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1056256787
  414. [ 5.525078] ubi0: available PEBs: 0, total reserved PEBs: 480, PEBs reserved for bad PEB handling: 40
  415. [ 5.534374] ubi0: background thread "ubi_bgt0d" started, PID 104
  416. [ 5.535007] hctosys: unable to open rtc device (rtc0)
  417. [ 5.549873] ALSA device list:
  418. [ 5.554499] No soundcards found.
  419. [ 5.558706] VFS: Mounted root (squashfs filesystem) readonly on device 31:27.
  420. [ 5.561222] Freeing unused kernel memory: 1024K
  421. [ 5.595456] Run /sbin/init as init process
  422. [ 5.737918] init: Console is alive
  423. [ 5.737973] init: - watchdog -
  424. [ 6.474640] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  425. [ 6.486685] Button Hotplug driver version 0.4.1
  426. [ 6.487888] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  427. [ 6.494679] init: - preinit -
  428. touch: /etc/config/network: Read-only file system
  429. mv: can't create '/etc/board.json': Read-only file system
  430. touch: /etc/config/skb_recycler: Read-only file system
  431. uci: Entry not found
  432. uci: Entry not found
  433. uci: Entry not found
  434. uci: Entry not found
  435. Press the [f] key and hit [enter] to enter failsafe mode
  436. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  437. [ 8.787342] UBIFS (ubi0:3): default file-system created
  438. [ 8.787710] UBIFS (ubi0:3): Mounting in unauthenticated mode
  439. [ 8.791414] UBIFS (ubi0:3): background thread "ubifs_bgt0_3" started, PID 177
  440. [ 8.828610] UBIFS (ubi0:3): UBIFS: mounted UBI device 0, volume 3, name "rootfs_data"
  441. [ 8.828623] UBIFS (ubi0:3): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  442. [ 8.835400] UBIFS (ubi0:3): FS size: 19046400 bytes (18 MiB, 150 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs)
  443. [ 8.845307] UBIFS (ubi0:3): reserved for root: 899608 bytes (878 KiB)
  444. [ 8.855557] UBIFS (ubi0:3): media format: w5/r0 (latest is w5/r0), UUID CA1499BA-5C8C-44CF-9F74-E8AE603F0C1F, small LPT model
  445. [ 8.863109] mount_root: overlay filesystem has not been fully initialized yet
  446. [ 8.873420] mount_root: switching to ubifs overlay
  447. 131072+0 records in
  448. 131072+0 records out
  449. 131072 bytes (128.0KB) copied, 0.292757 seconds, 437.2KB/s
  450. cp: can't create '/lib/firmware/IPQ9574/caldata.bin': No such file or directory
  451. 184320+0 records in
  452. 184320+0 records out
  453. 184320 bytes (180.0KB) copied, 0.365178 seconds, 492.9KB/s
  454. 184320+0 records in
  455. 184320+0 records out
  456. 184320 bytes (180.0KB) copied, 0.333139 seconds, 540.3KB/s
  457. 88064+0 records in
  458. 88064+0 records out
  459. 88064 bytes (86.0KB) copied, 0.144400 seconds, 595.6KB/s
  460. 0+0 records in
  461. 0+0 records out
  462. 0 bytes (0B) copied, 0.535301 seconds, 0B/s
  463. cp: can't create '/lib/firmware/qcn9224/caldata_1.bin': No such [ 10.599505] urandom-seed: Seed file not found (/etc/urandom.seed)
  464. [ 10.605538] procd: - early -
  465. file or directory
  466. cp: can't create '/lib/firmware/qcn9224/calda[ 10.609407] procd: - watchdog -
  467. ta_2.bin': No such file or directory
  468. cp: can't create '/lib/firmware/qcn9224/caldata_3.bin': No such file or directory
  469. cp: can't create '/lib/firmware/qcn9224/caldata_4.bin': No such file or directory
  470. [ 11.142786] procd: - watchdog -
  471. [ 11.142857] procd: - ubus -
  472. [ 11.199594] procd: - init -
  473. Please press Enter to activate this console.
  474. Loading cnss2:
  475. [ 11.226541] cnss: INFO: IPC Logging is disabled!
  476. [ 11.226778] remoteproc remoteproc0: QCN9224_PCI1 is available
  477. [ 11.230404] cnss[38]: INFO: Platform driver probed successfully. plat 0xa155b9a1 tgt 0x1109
  478. [ 11.235973] remoteproc remoteproc1: QCN9224_PCI2 is available
  479. [ 11.244204] cnss[39]: INFO: Platform driver probed successfully. plat 0x995ad42d tgt 0x1109
  480. [ 11.250051] remoteproc remoteproc2: QCN9224_PCI3 is available
  481. [ 11.258317] cnss[3a]: INFO: Platform driver probed successfully. plat 0x40e9ba74 tgt 0x1109
  482. [ 11.264402] cnss[38]: INFO: PCI device 9765b6ec probed successfully
  483. [ 11.272359] cnss[39]: INFO: PCI device 25093267 probed successfully
  484. [ 11.278574] cnss[3a]: INFO: PCI device e7a868cd probed successfully
  485. [ 11.284866] cnss: INFO: cnss_plat_ipc_qmi_svc_init: CNSS Platform IPC QMI Service is started
  486. [ 11.290901] cnss[38]: INFO: cnss_set_mlo_config: MLO Config updated for QCN9224_PCI1
  487. [ 11.290902] cnss[39]: INFO: cnss_set_mlo_config: MLO Config updated for QCN9224_PCI2
  488. [ 11.299575] cnss[3a]: INFO: cnss_set_mlo_config: MLO Config updated for QCN9224_PCI3
  489. [ 11.307299] cnss[3a]: INFO: Default MLO configuration is set!
  490. [ 11.364126] ubi: mtd2 is already attached to ubi0
  491. [ 11.374149] urngd: v1.0.2 started.
  492. WIFI FW mount is successful
  493. No PFM license files in partition to load
  494. [ 12.195890] Number of license files loaded: 0
  495. [ 12.565570] cnss: INFO: cnss_plat_ipc_qmi_reg_client_req_handler: QMI Client Connected. QMI Socket Node: 1 Port: 16394 ID: 1
  496. [ 12.565590] cnss: INFO: CNSS Daemon connected
  497. [ 12.577097] cnss: INFO: cnss_plat_ipc_qmi_init_setup_req_handler: MAC: 0 HW_TRC: 0 CAL: 0
  498. [ 12.959568] kmodloader: loading kernel modules from /etc/modules.d/*
  499. [ 12.961294] PPP generic driver version 2.4.2
  500. [ 12.965167] NET: Registered protocol family 24
  501. [ 12.970427] qca_nss_sfe: Unknown symbol ppe_rfs_ipv6_rule_create (err -2)
  502. [ 12.973505] qca_nss_sfe: Unknown symbol ppe_rfs_ipv4_rule_create (err -2)
  503. [ 12.980380] qca_nss_sfe: Unknown symbol ppe_rfs_ipv4_rule_destroy (err -2)
  504. [ 12.987174] qca_nss_sfe: Unknown symbol ppe_rfs_ipv6_rule_destroy (err -2)
  505. [ 13.070054] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  506. [ 13.214527] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  507. [ 13.214631] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  508. [ 13.218858] ntfs: driver 2.1.32 [Flags: R/O MODULE].
  509. [ 13.219939] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db
  510. [ 13.230138] NET: Registered protocol family 15
  511. [ 13.242132] Initializing XFRM netlink socket
  512. [ 13.245922] mpls_gso: MPLS GSO support
  513. [ 13.248555] cfg80211: failed to load regulatory.db
  514. [ 13.329477] ssdk_switch_device_num_init[1334]:INFO:ess-switch dts node number: 1
  515. [ 13.329502] ssdk_dt_get_switch_node[1123]:INFO:ess-switch DT exist!
  516. [ 13.335934] ssdk_dt_parse_access_mode[998]:INFO:switch_access_mode: local bus
  517. [ 13.341910] ssdk_dt_parse_access_mode[1011]:INFO:switchreg_base_addr: 0x3a000000
  518. [ 13.349204] ssdk_dt_parse_access_mode[1012]:INFO:switchreg_size: 0x1000000
  519. [ 13.356668] ssdk_dt_parse_mac_mode[327]:INFO:mac mode = 0x0
  520. [ 13.363347] ssdk_dt_parse_mac_mode[336]:INFO:mac mode1 = 0xd
  521. [ 13.368821] ssdk_dt_parse_mac_mode[345]:INFO:mac mode2 = 0xd
  522. [ 13.374748] ssdk_dt_parse_uniphy[364]:INFO:ess-uniphy DT exist!
  523. [ 13.380469] ssdk_dt_parse_intf_mac[943]:INFO:dp1 MAC 00:03:7f:93:1f:07
  524. [ 13.386040] ssdk_dt_parse_intf_mac[943]:INFO:dp2 MAC 00:03:7f:8a:32:87
  525. [ 13.392632] ssdk_dt_parse_intf_mac[943]:INFO:dp3 MAC 00:03:7f:ea:11:a6
  526. [ 13.399145] ssdk_dt_parse_intf_mac[943]:INFO:dp4 MAC 00:03:7f:ac:37:ea
  527. [ 13.405656] ssdk_dt_parse_intf_mac[943]:INFO:dp5 MAC 00:03:7f:0b:53:75
  528. [ 13.412163] ssdk_dt_parse_intf_mac[943]:INFO:dp6 MAC 00:03:7f:2a:5c:78
  529. [ 13.418653] ssdk_dt_parse_led[1096]:INFO:current dts led_source_num is 0
  530. [ 13.425155] ssdk_plat_init[1698]:INFO:ssdk_plat_init start
  531. [ 13.545434] ssdk_gcc_clock_init[1234]:INFO:SSDK gcc clock init successfully!
  532. [ 13.546319] malibu_phy_api_ops_init[2834]:INFO:qca probe malibu phy driver succeeded!
  533. [ 13.555387] aquantia_phy_api_ops_init[2241]:INFO:qca probe aquantia phy driver succeeded!
  534. [ 13.560544] regi_init[3977]:INFO:Initializing APPE!!
  535. [ 13.805424] ssdk_ppe_reset_init[1494]:INFO:ppe reset successfully!
  536. [ 13.805579] qca_hppe_bm_hw_init[762]:INFO:appe bm initialization
  537. [ 13.811737] qca_hppe_qm_hw_init[973]:INFO:appe qm initialization
  538. [ 13.817199] qca_appe_tdm_hw_init[367]:INFO:appe scheduler tdm mode =0
  539. [ 13.822629] qca_appe_tdm_hw_init[391]:INFO:appe tdm setup num=118
  540. acfg_tool: Issuing blocking call to wait for events
  541. [ 15.108444] qca_hppe_interface_mode_init[1327]:INFO:appe interface mode initialization
  542. [ 15.108465] _adpt_appe_port_mux_mac_set[96]:INFO:appe port 1 mac type is 1
  543. [ 15.115236] _adpt_appe_port_mux_mac_set[96]:INFO:appe port 2 mac type is 1
  544. [ 15.122098] _adpt_appe_port_mux_mac_set[96]:INFO:appe port 3 mac type is 1
  545. [ 15.128954] _adpt_appe_port_mux_mac_set[96]:INFO:appe port 4 mac type is 1
  546. [ 15.135810] _adpt_appe_port_mux_mac_set[96]:INFO:appe port 5 mac type is 2
  547. [ 15.475421] _adpt_appe_port_mux_mac_set[96]:INFO:appe port 6 mac type is 2
  548. [ 15.817444] qca_appe_portctrl_hw_init[439]:INFO:appe portctrl initialization
  549. [ 15.819822] qca_appe_rss_hash_hw_init[620]:INFO:appe rss hash initialization: hash_seed 0x62391d17
  550. [ 15.823538] ssdk_switch_register[2051]:INFO:Chip version 0x2000
  551. [ 15.832315] qca_link_polling_select[1497]:INFO:link-polling-required node does not exist
  552. [ 15.838123] ssdk_switch_register[2077]:INFO:polling is selected
  553. [ 15.846456] regi_init[3981]:INFO:Initializing APPE Done!!
  554. [ 15.852151] ssdk_genl_init[211]:INFO:ssdk genl family register success.
  555. [ 15.857657] regi_init[4053]:INFO:qca-ssdk module init succeeded!
  556. [ 15.864254] qca_nss_ppe: Unknown symbol xlate_6_to_4 (err -2)
  557. [ 15.870624] qca_nss_ppe: Unknown symbol xlate_4_to_6 (err -2)
  558. [ 15.872292] tun: Universal TUN/TAP device driver, 1.6
  559. [ 15.946829] qca_nss_dp: Unknown symbol ppe_drv_dp_init (err -2)
  560. [ 15.946895] qca_nss_dp: Unknown symbol ppe_drv_iface_mac_addr_set (err -2)
  561. [ 15.951554] qca_nss_dp: Unknown symbol ppe_drv_cc_process_skbuff (err -2)
  562. [ 15.958512] qca_nss_dp: Unknown symbol ppe_drv_core2queue_mapping (err -2)
  563. [ 15.965366] qca_nss_dp: Unknown symbol ppe_drv_sc_unregister_cb (err -2)
  564. [ 15.972131] qca_nss_dp: Unknown symbol ppe_drv_iface_alloc (err -2)
  565. [ 15.978980] qca_nss_dp: Unknown symbol ppe_drv_iface_deref (err -2)
  566. [ 15.984965] qca_nss_dp: Unknown symbol ppe_drv_iface_mtu_set (err -2)
  567. [ 15.991223] qca_nss_dp: Unknown symbol ppe_drv_dp_deinit (err -2)
  568. [ 16.005486] qca_nss_dp: Unknown symbol ppe_drv_iface_get_by_dev (err -2)
  569. [ 16.005515] qca_nss_dp: Unknown symbol ppe_drv_sc_process_skbuff (err -2)
  570. [ 16.011235] qca_nss_dp: Unknown symbol ppe_drv_sc_register_cb (err -2)
  571. [ 16.065460] qca_nss_dp: Unknown symbol ppe_drv_dp_init (err -2)
  572. [ 16.065503] qca_nss_dp: Unknown symbol ppe_drv_iface_mac_addr_set (err -2)
  573. [ 16.067215] qca_nss_ppe: Unknown symbol xlate_6_to_4 (err -2)
  574. [ 16.070182] qca_nss_dp: Unknown symbol ppe_drv_cc_process_skbuff (err -2)
  575. [ 16.077289] qca_nss_ppe: Unknown symbol xlate_4_to_6 (err -2)
  576. [ 16.082949] qca_nss_dp: Unknown symbol ppe_drv_core2queue_mapping (err -2)
  577. [ 16.125455] qca_nss_dp: Unknown symbol ppe_drv_sc_unregister_cb (err -2)
  578. [ 16.125478] qca_nss_dp: Unknown symbol ppe_drv_iface_alloc (err -2)
  579. [ 16.128694] l2tp_core: L2TP core driver, V2.0
  580. [ 16.131239] qca_nss_dp: Unknown symbol ppe_drv_iface_deref (err -2)
  581. [ 16.137579] l2tp_netlink: L2TP netlink interface
  582. [ 16.141733] qca_nss_dp: Unknown symbol ppe_drv_iface_mtu_set (err -2)
  583. [ 16.148214] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  584. [ 16.152648] qca_nss_dp: Unknown symbol ppe_drv_dp_deinit (err -2)
  585. [ 16.160189] nat46: module (version 1182f30785e4274913f01a8c3d7e1b5437ae3819) loaded.
  586. [ 16.165376] qca_nss_dp: Unknown symbol ppe_drv_iface_get_by_dev (err -2)
  587. [ 16.172009] gre: GRE over IPv4 demultiplexor driver
  588. [ 16.178980] qca_nss_dp: Unknown symbol ppe_drv_sc_process_skbuff (err -2)
  589. [ 16.186030] ip_gre: GRE over IPv4 tunneling driver
  590. [ 16.190110] qca_nss_dp: Unknown symbol ppe_drv_sc_register_cb (err -2)
  591. [ 16.198074] ip6_gre: GRE over IPv6 tunneling driver
  592. [ 16.247067] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
  593. [ 16.248499] qca_nss_ppe_vp: Unknown symbol ppe_drv_port_get_vp_stats (err -2)
  594. [ 16.252761] qca_nss_ppe_vp: Unknown symbol nss_dp_vp_init (err -2)
  595. [ 16.257268] cryptodev: driver 1.10 loaded.
  596. [ 16.260144] qca_nss_ppe_vp: Unknown symbol nss_dp_vp_deinit (err -2)
  597. [ 16.267416] PPTP driver version 0.8.5
  598. [ 16.269782] qca_nss_ppe_vp: Unknown symbol ppe_drv_iface_ucast_queue_set (err -2)
  599. [ 16.279872] qca_nss_ppe_vp: Unknown symbol ppe_drv_iface_mac_addr_set (err -2)
  600. [ 16.281350] openvswitch: Open vSwitch switching datapath
  601. [ 16.287337] qca_nss_ppe_vp: Unknown symbol ppe_drv_iface_mac_addr_clear (err -2)
  602. [ 16.301339] qca_nss_ppe_vp: Unknown symbol ppe_drv_iface_alloc (err -2)
  603. [ 16.301933] qca_nss_ppe_ds: Unknown symbol edma_ppeds_set_tx_prod_idx (err -2)
  604. [ 16.307326] qca_nss_ppe_vp: Unknown symbol ppe_drv_iface_deref (err -2)
  605. [ 16.313540] qca_nss_ppe_ds: Unknown symbol ppe_vp_free (err -2)
  606. [ 16.320832] qca_nss_ppe_vp: Unknown symbol ppe_drv_iface_mtu_set (err -2)
  607. [ 16.327368] qca_nss_ppe_ds: Unknown symbol ppe_vp_alloc (err -2)
  608. [ 16.333253] qca_nss_ppe_vp: Unknown symbol nss_dp_vp_rx_unregister_cb (err -2)
  609. [ 16.340271] qca_nss_ppe_ds: Unknown symbol edma_ppeds_set_rx_cons_idx (err -2)
  610. [ 16.346473] qca_nss_ppe_vp: Unknown symbol ppe_drv_get_dentry (err -2)
  611. [ 16.353320] qca_nss_ppe_ds: Unknown symbol edma_ppeds_inst_start (err -2)
  612. [ 16.360551] qca_nss_ppe_vp: Unknown symbol ppe_drv_vp_deinit (err -2)
  613. [ 16.367007] qca_nss_ppe_ds: Unknown symbol edma_ppeds_get_tx_cons_idx (err -2)
  614. [ 16.373977] qca_nss_ppe_vp: Unknown symbol nss_dp_vp_xmit (err -2)
  615. [ 16.380385] qca_nss_ppe_ds: Unknown symbol edma_ppeds_inst_stop (err -2)
  616. [ 16.387768] qca_nss_ppe_vp: Unknown symbol ppe_drv_port_num_from_dev (err -2)
  617. [ 16.393562] qca_nss_ppe_ds: Unknown symbol edma_ppeds_inst_refill (err -2)
  618. [ 16.400447] qca_nss_ppe_vp: Unknown symbol ppe_drv_port_clear_hw_vp_stats (err -2)
  619. [ 16.407462] qca_nss_ppe_ds: Unknown symbol edma_ppeds_get_ppe_queues (err -2)
  620. [ 16.414234] qca_nss_ppe_vp: Unknown symbol nss_dp_vp_rx_register_cb (err -2)
  621. [ 16.421770] qca_nss_ppe_ds: Unknown symbol edma_ppeds_inst_register (err -2)
  622. [ 16.429042] qca_nss_ppe_vp: Unknown symbol ppe_drv_vp_init (err -2)
  623. [ 16.436131] qca_nss_ppe_ds: Unknown symbol edma_ppeds_inst_alloc (err -2)
  624. [ 16.535517] qca_nss_ppe_ds: Unknown symbol edma_ppeds_inst_del (err -2)
  625. [ 16.535554] qca_nss_ppe_ds: Unknown symbol edma_ppeds_get_rx_prod_idx (err -2)
  626. [ 16.540940] qca_nss_ppe_ds: Unknown symbol edma_ppeds_drain_rxfill_ring (err -2)
  627. [ 16.546899] loading qca-wifi
  628. [ 16.548292] qca_nss_ppe_ds: Unknown symbol edma_ppeds_drain_tx_cmpl_ring (err -2)
  629. qcawifi configuration is disable
  630. [ 16.641979] diag: failed to find diag_dload imem node
  631. [ 16.644930] TRACK: P[0] PMask[4]
  632. [ 16.646010] TRACK: P[1] PMask[4]
  633. [ 16.649290] TRACK: P[2] PMask[4]
  634. [ 16.652637] TRACK: P[3] PMask[4]
  635. [ 16.655720] TRACK: P[4] PMask[4]
  636. [ 16.658925] TRACK: P[5] PMask[4]
  637. [ 16.662138] TRACK: P[6] PMask[4]
  638. [ 16.666755] QCA multicast snooping installed successfully
  639. [ 16.669215] qca_nss_eip: Unknown symbol ppe_drv_port_num_to_dev (err -2)
  640. ***Service Aware Wifi: 0 in Alder platfrom***
  641. [ 16.747224] cannot find nss-macsec0 node
  642. [ 16.747294] cannot find nss-macsec1 node
  643. [ 16.750291] cannot find nss-macsec2 node
  644. [ 16.754187] cannot find nss-macsec3 node
  645. [ 16.758015] nss_macsec init success
  646. [ 16.762428] qca_nss_ppe_vp: Unknown symbol ppe_drv_port_get_vp_stats (err -2)
  647. [ 16.765200] qca_nss_ppe_vp: Unknown symbol nss_dp_vp_init (err -2)
  648. [ 16.772517] qca_nss_ppe_vp: Unknown symbol nss_dp_vp_deinit (err -2)
  649. [ 16.778589] qca_nss_ppe_vp: Unknown symbol ppe_drv_iface_ucast_queue_set (err -2)
  650. [ 16.785057] qca_nss_ppe_vp: Unknown symbol ppe_drv_iface_mac_addr_set (err -2)
  651. [ 16.792474] qca_nss_ppe_vp: Unknown symbol ppe_drv_iface_mac_addr_clear (err -2)
  652. [ 16.799602] qca_nss_ppe_vp: Unknown symbol ppe_drv_iface_alloc (err -2)
  653. [ 16.807139] qca_nss_ppe_vp: Unknown symbol ppe_drv_iface_deref (err -2)
  654. [ 16.813456] qca_nss_ppe_vp: Unknown symbol ppe_drv_iface_mtu_set (err -2)
  655. [ 16.820070] qca_nss_ppe_vp: Unknown symbol nss_dp_vp_rx_unregister_cb (err -2)
  656. [ 16.827014] qca_nss_ppe_vp: Unknown symbol ppe_drv_get_dentry (err -2)
  657. [ 16.834123] qca_nss_ppe_vp: Unknown symbol ppe_drv_vp_deinit (err -2)
  658. [ 16.840621] qca_nss_ppe_vp: Unknown symbol nss_dp_vp_xmit (err -2)
  659. [ 16.847141] qca_nss_ppe_vp: Unknown symbol ppe_drv_port_num_from_dev (err -2)
  660. [ 16.853183] qca_nss_ppe_vp: Unknown symbol ppe_drv_port_clear_hw_vp_stats (err -2)
  661. [ 16.860468] qca_nss_ppe_vp: Unknown symbol nss_dp_vp_rx_register_cb (err -2)
  662. [ 16.867983] qca_nss_ppe_vp: Unknown symbol ppe_drv_vp_init (err -2)
  663. [ 16.946309] qca_nss_ppe_gretap: Unknown symbol ppe_tun_decap_enable (err -2)
  664. [ 16.946347] qca_nss_ppe_gretap: Unknown symbol ppe_tun_mtu_set (err -2)
  665. [ 16.952474] qca_nss_ppe_gretap: Unknown symbol ppe_tun_free (err -2)
  666. [ 16.958837] qca_nss_ppe_gretap: Unknown symbol ppe_tun_decap_disable (err -2)
  667. [ 16.965411] qca_nss_ppe_gretap: Unknown symbol ppe_tun_deconfigure (err -2)
  668. [ 16.972444] qca_nss_ppe_gretap: Unknown symbol ppe_tun_alloc (err -2)
  669. [ 16.982319] qca_nss_ppe_gretap: Unknown symbol ppe_tun_exception_packet_get (err -2)
  670. [ 16.985837] qca_nss_ppe_gretap: Unknown symbol ppe_tun_conf_accel (err -2)
  671. [ 16.993601] qca_nss_ppe_gretap: Unknown symbol ppe_tun_configure (err -2)
  672. [ 17.026310] qca_nss_ppe_mapt: Unknown symbol ppe_tun_mtu_set (err -2)
  673. [ 17.026348] qca_nss_ppe_mapt: Unknown symbol ppe_tun_free (err -2)
  674. [ 17.031738] qca_nss_ppe_mapt: Unknown symbol ppe_tun_deconfigure (err -2)
  675. [ 17.037818] qca_nss_ppe_mapt: Unknown symbol ppe_tun_alloc (err -2)
  676. [ 17.044700] qca_nss_ppe_mapt: Unknown symbol ppe_tun_exception_packet_get (err -2)
  677. [ 17.054052] qca_nss_ppe_mapt: Unknown symbol ppe_tun_conf_accel (err -2)
  678. [ 17.058405] qca_nss_ppe_mapt: Unknown symbol ppe_tun_configure (err -2)
  679. [ 17.115883] qca_nss_ppe_tun: Unknown symbol ppe_drv_tun_decap_enable_by_port_num (err -2)
  680. [ 17.115931] qca_nss_ppe_tun: Unknown symbol ppe_vp_free (err -2)
  681. [ 17.123050] qca_nss_ppe_tun: Unknown symbol ppe_vp_alloc (err -2)
  682. [ 17.129156] qca_nss_ppe_tun: Unknown symbol ppe_drv_port_xcpn_mode_set (err -2)
  683. [ 17.135121] qca_nss_ppe_tun: Unknown symbol ppe_drv_tun_configure (err -2)
  684. [ 17.142268] qca_nss_ppe_tun: Unknown symbol ppe_drv_port_get_vp_phys_dev (err -2)
  685. [ 17.149217] qca_nss_ppe_tun: Unknown symbol ppe_drv_tun_decap_disable_by_port_num (err -2)
  686. [ 17.156768] qca_nss_ppe_tun: Unknown symbol ppe_drv_tun_activate (err -2)
  687. [ 17.164919] qca_nss_ppe_tun: Unknown symbol ppe_drv_tun_deconfigure (err -2)
  688. [ 17.171766] qca_nss_ppe_tun: Unknown symbol ppe_drv_tun_deactivate (err -2)
  689. [ 17.178894] qca_nss_ppe_tun: Unknown symbol ppe_vp_mtu_get (err -2)
  690. [ 17.185582] qca_nss_ppe_tun: Unknown symbol ppe_vp_mtu_set (err -2)
  691. [ 17.225785] qca_nss_ppe_vxlanmgr: Unknown symbol ppe_tun_decap_enable (err -2)
  692. [ 17.225815] qca_nss_ppe_vxlanmgr: Unknown symbol ppe_tun_mtu_set (err -2)
  693. [ 17.231903] qca_nss_ppe_vxlanmgr: Unknown symbol ppe_tun_free (err -2)
  694. [ 17.238802] qca_nss_ppe_vxlanmgr: Unknown symbol ppe_tun_decap_disable (err -2)
  695. [ 17.245207] qca_nss_ppe_vxlanmgr: Unknown symbol ppe_tun_deconfigure (err -2)
  696. [ 17.252407] qca_nss_ppe_vxlanmgr: Unknown symbol ppe_tun_alloc (err -2)
  697. [ 17.259776] qca_nss_ppe_vxlanmgr: Unknown symbol ppe_tun_conf_accel (err -2)
  698. [ 17.266150] qca_nss_ppe_vxlanmgr: Unknown symbol ppe_tun_configure (err -2)
  699. [ 17.305778] qca_nss_ppe_tunipip6: Unknown symbol ppe_tun_mtu_set (err -2)
  700. [ 17.305828] qca_nss_ppe_tunipip6: Unknown symbol ppe_tun_free (err -2)
  701. [ 17.305926] umac: Unknown symbol ppe_vp_mtu_set (err -2)
  702. [ 17.311542] qca_nss_ppe_tunipip6: Unknown symbol ppe_tun_deconfigure (err -2)
  703. [ 17.318086] umac: Unknown symbol ppe_vp_alloc (err -2)
  704. [ 17.323431] qca_nss_ppe_tunipip6: Unknown symbol ppe_tun_alloc (err -2)
  705. [ 17.330570] umac: Unknown symbol ppe_vp_free (err -2)
  706. [ 17.335503] qca_nss_ppe_tunipip6: Unknown symbol ppe_tun_exception_packet_get (err -2)
  707. [ 17.342073] umac: Unknown symbol ppe_vp_mac_addr_set (err -2)
  708. [ 17.347219] qca_nss_ppe_tunipip6: Unknown symbol ppe_tun_conf_accel (err -2)
  709. [ 17.355126] umac: Unknown symbol ppe_vp_tx_to_ppe (err -2)
  710. [ 17.360853] qca_nss_ppe_tunipip6: Unknown symbol ppe_tun_configure (err -2)
  711. [ 17.500939] usbcore: registered new interface driver usbfs
  712. [ 17.500967] usbcore: registered new interface driver hub
  713. [ 17.505641] usbcore: registered new device driver usb
  714. [ 17.506425] qca-wifi loaded
  715. [ 17.515641] SCSI subsystem initialized
  716. [ 17.519262] usbcore: registered new interface driver usb-storage
  717. [ 17.522521] Mirror/redirect action on
  718. [ 17.530520] u32 classifier
  719. [ 17.531856] input device check on
  720. [ 17.534462] Actions configured
  721. [ 17.540615] GACT probability on
  722. [ 17.542577] Simple TC action Loaded
  723. [ 17.555636] fuse: init (API version 7.31)
  724. [ 17.559755] qcom-qusb2-phy 7b000.qusb: 7b000.qusb supply vdda-pll not found, using dummy regulator
  725. [ 17.559802] qcom-qusb2-phy 7b000.qusb: 7b000.qusb supply vdda-phy-dpdm not found, using dummy regulator
  726. [ 17.567762] qcom-qusb2-phy 7b000.qusb: Registered Qcom-QUSB2 phy
  727. [ 17.587681] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  728. [ 17.589014] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  729. [ 17.591383] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  730. [ 17.600790] nf_conntrack_rtsp v0.7 loading
  731. [ 17.608967] nf_nat_rtsp v0.7 loading
  732. [ 17.616690] PPP MPPE Compression module registered
  733. [ 17.621453] usbcore: registered new interface driver uas
  734. [ 17.632747] xt_time: kernel timezone is -0000
  735. [ 17.634182] qca_nss_dp: Unknown symbol ppe_drv_dp_init (err -2)
  736. [ 17.636272] qca_nss_dp: Unknown symbol ppe_drv_iface_mac_addr_set (err -2)
  737. [ 17.642031] qca_nss_dp: Unknown symbol ppe_drv_cc_process_skbuff (err -2)
  738. [ 17.648956] qca_nss_dp: Unknown symbol ppe_drv_core2queue_mapping (err -2)
  739. [ 17.655922] qca_nss_dp: Unknown symbol ppe_drv_sc_unregister_cb (err -2)
  740. [ 17.662524] qca_nss_dp: Unknown symbol ppe_drv_iface_alloc (err -2)
  741. [ 17.666306] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000000000010010
  742. [ 17.669442] qca_nss_dp: Unknown symbol ppe_drv_iface_deref (err -2)
  743. [ 17.675247] xhci-hcd xhci-hcd.0.auto: irq 102, io mem 0x08a00000
  744. [ 17.684756] qca_nss_dp: Unknown symbol ppe_drv_iface_mtu_set (err -2)
  745. [ 17.697264] qca_nss_dp: Unknown symbol ppe_drv_dp_deinit (err -2)
  746. [ 17.704353] qca_nss_dp: Unknown symbol ppe_drv_iface_get_by_dev (err -2)
  747. [ 17.709750] qca_nss_dp: Unknown symbol ppe_drv_sc_process_skbuff (err -2)
  748. [ 17.716309] hub 1-0:1.0: USB hub found
  749. [ 17.716399] qca_nss_dp: Unknown symbol ppe_drv_sc_register_cb (err -2)
  750. [ 17.723027] hub 1-0:1.0: 1 port detected
  751. [ 17.745592] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  752. [ 17.745611] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  753. [ 17.749967] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
  754. [ 17.766234] qca_nss_eip: Unknown symbol ppe_drv_port_num_to_dev (err -2)
  755. [ 17.784003] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  756. [ 17.784246] hub 2-0:1.0: USB hub found
  757. [ 17.791202] hub 2-0:1.0: 1 port detected
  758. [ 17.812708] qca_nss_ppe_ds: Unknown symbol edma_ppeds_set_tx_prod_idx (err -2)
  759. [ 17.812769] qca_nss_ppe_ds: Unknown symbol ppe_vp_free (err -2)
  760. [ 17.819038] qca_nss_ppe_ds: Unknown symbol ppe_vp_alloc (err -2)
  761. [ 17.824718] qca_nss_ppe_ds: Unknown symbol edma_ppeds_set_rx_cons_idx (err -2)
  762. [ 17.830952] qca_nss_ppe_ds: Unknown symbol edma_ppeds_inst_start (err -2)
  763. [ 17.837998] qca_nss_ppe_ds: Unknown symbol edma_ppeds_get_tx_cons_idx (err -2)
  764. [ 17.844851] qca_nss_ppe_ds: Unknown symbol edma_ppeds_inst_stop (err -2)
  765. [ 17.851960] qca_nss_ppe_ds: Unknown symbol edma_ppeds_inst_refill (err -2)
  766. [ 17.858843] qca_nss_ppe_ds: Unknown symbol edma_ppeds_get_ppe_queues (err -2)
  767. [ 17.865539] qca_nss_ppe_ds: Unknown symbol edma_ppeds_inst_register (err -2)
  768. [ 17.872726] qca_nss_ppe_ds: Unknown symbol edma_ppeds_inst_alloc (err -2)
  769. [ 17.879861] qca_nss_ppe_ds: Unknown symbol edma_ppeds_inst_del (err -2)
  770. [ 17.886883] qca_nss_ppe_ds: Unknown symbol edma_ppeds_get_rx_prod_idx (err -2)
  771. [ 17.892949] qca_nss_ppe_ds: Unknown symbol edma_ppeds_drain_rxfill_ring (err -2)
  772. [ 17.900247] qca_nss_ppe_ds: Unknown symbol edma_ppeds_drain_tx_cmpl_ring (err -2)
  773. [ 17.995738] qca_nss_ppe_gretap: Unknown symbol ppe_tun_decap_enable (err -2)
  774. [ 17.995789] qca_nss_ppe_gretap: Unknown symbol ppe_tun_mtu_set (err -2)
  775. [ 18.001979] qca_nss_ppe_gretap: Unknown symbol ppe_tun_free (err -2)
  776. [ 18.008339] qca_nss_ppe_gretap: Unknown symbol ppe_tun_decap_disable (err -2)
  777. [ 18.014926] qca_nss_ppe_gretap: Unknown symbol ppe_tun_deconfigure (err -2)
  778. [ 18.022097] qca_nss_ppe_gretap: Unknown symbol ppe_tun_alloc (err -2)
  779. [ 18.028789] qca_nss_ppe_gretap: Unknown symbol ppe_tun_exception_packet_get (err -2)
  780. [ 18.035288] qca_nss_ppe_gretap: Unknown symbol ppe_tun_conf_accel (err -2)
  781. [ 18.043193] qca_nss_ppe_gretap: Unknown symbol ppe_tun_configure (err -2)
  782. [ 18.095722] qca_nss_ppe_mapt: Unknown symbol ppe_tun_mtu_set (err -2)
  783. [ 18.095781] qca_nss_ppe_mapt: Unknown symbol ppe_tun_free (err -2)
  784. [ 18.101220] qca_nss_ppe_mapt: Unknown symbol ppe_tun_deconfigure (err -2)
  785. [ 18.107353] qca_nss_ppe_mapt: Unknown symbol ppe_tun_alloc (err -2)
  786. [ 18.114200] qca_nss_ppe_mapt: Unknown symbol ppe_tun_exception_packet_get (err -2)
  787. [ 18.120312] qca_nss_ppe_mapt: Unknown symbol ppe_tun_conf_accel (err -2)
  788. [ 18.127895] qca_nss_ppe_mapt: Unknown symbol ppe_tun_configure (err -2)
  789. [ 18.209166] PPE-RULE module loaded successfully
  790. [ 18.209434] qca_nss_ppe_tun: Unknown symbol ppe_vp_free (err -2)
  791. [ 18.212516] qca_nss_ppe_tun: Unknown symbol ppe_vp_alloc (err -2)
  792. [ 18.218808] qca_nss_ppe_tun: Unknown symbol ppe_vp_mtu_get (err -2)
  793. [ 18.224755] qca_nss_ppe_tun: Unknown symbol ppe_vp_mtu_set (err -2)
  794. [ 18.268805] qca_nss_ppe_tunipip6: Unknown symbol ppe_tun_mtu_set (err -2)
  795. [ 18.268851] qca_nss_ppe_tunipip6: Unknown symbol ppe_tun_free (err -2)
  796. [ 18.274578] qca_nss_ppe_tunipip6: Unknown symbol ppe_tun_deconfigure (err -2)
  797. [ 18.281009] qca_nss_ppe_tunipip6: Unknown symbol ppe_tun_alloc (err -2)
  798. [ 18.288216] qca_nss_ppe_tunipip6: Unknown symbol ppe_tun_exception_packet_get (err -2)
  799. [ 18.294626] qca_nss_ppe_tunipip6: Unknown symbol ppe_tun_conf_accel (err -2)
  800. [ 18.302626] qca_nss_ppe_tunipip6: Unknown symbol ppe_tun_configure (err -2)
  801. [ 18.366237] qca_nss_ppe_vp: Unknown symbol nss_dp_vp_init (err -2)
  802. [ 18.366281] qca_nss_ppe_vp: Unknown symbol nss_dp_vp_deinit (err -2)
  803. [ 18.371340] qca_nss_ppe_vp: Unknown symbol nss_dp_vp_rx_unregister_cb (err -2)
  804. [ 18.377853] qca_nss_ppe_vp: Unknown symbol nss_dp_vp_xmit (err -2)
  805. [ 18.384862] qca_nss_ppe_vp: Unknown symbol nss_dp_vp_rx_register_cb (err -2)
  806. [ 18.425571] qca_nss_ppe_vxlanmgr: Unknown symbol ppe_tun_decap_enable (err -2)
  807. [ 18.425611] qca_nss_ppe_vxlanmgr: Unknown symbol ppe_tun_mtu_set (err -2)
  808. [ 18.431690] qca_nss_ppe_vxlanmgr: Unknown symbol ppe_tun_free (err -2)
  809. [ 18.438556] qca_nss_ppe_vxlanmgr: Unknown symbol ppe_tun_decap_disable (err -2)
  810. [ 18.444976] qca_nss_ppe_vxlanmgr: Unknown symbol ppe_tun_deconfigure (err -2)
  811. [ 18.452181] qca_nss_ppe_vxlanmgr: Unknown symbol ppe_tun_alloc (err -2)
  812. [ 18.459527] qca_nss_ppe_vxlanmgr: Unknown symbol ppe_tun_conf_accel (err -2)
  813. [ 18.465905] qca_nss_ppe_vxlanmgr: Unknown symbol ppe_tun_configure (err -2)
  814. [ 18.518230] nss_ppe_lag_register_event[334]:7a267000: Bond interface (bond0) is created=0
  815. [ 18.518248] nss_ppe_lag_init[506]:LAG Manager Installed
  816. [ 18.534968] (unnamed net_device) (uninitialized): netif_napi_add() called with weight 128
  817. [ 18.535466] ppe_port_vsi_get[476]:INFO:VSI is not configured on port 0x1
  818. [ 18.542665] ppe_port_vsi_get[476]:INFO:VSI is not configured on port 0x2
  819. [ 18.549549] ppe_port_vsi_get[476]:INFO:VSI is not configured on port 0x3
  820. [ 18.556147] ppe_port_vsi_get[476]:INFO:VSI is not configured on port 0x4
  821. [ 18.562845] ppe_port_vsi_get[476]:INFO:VSI is not configured on port 0x5
  822. [ 18.606253] ppe_port_vsi_get[476]:INFO:VSI is not configured on port 0x6
  823. [ 18.646154] **********************************************************
  824. [ 18.646169] * NSS Data Plane driver
  825. [ 18.651554] **********************************************************
  826. [ 18.777924] 7b704c10: ifpp.bin version(0x7330)
  827. [ 18.878311] 7b704c10: ipue.bin version(0x7330)
  828. [ 18.978540] 7b704c10: ofpp.bin version(0x7330)
  829. [ 19.078768] 7b704c10: opue.bin version(0x7330)
  830. [ 19.078844] 74b50040: DMA ring(0) configured and Rx mapped to cpu(3)
  831. [ 19.082115] 74b51240: DMA ring(1) configured and Rx mapped to cpu(2)
  832. [ 19.088629] 74b52440: DMA ring(2) configured and Rx mapped to cpu(1)
  833. [ 19.094957] 74b53640: DMA ring(3) configured and Rx mapped to cpu(0)
  834. [ 19.101503] 74b54840: DMA ring(4) configured and Rx mapped to cpu(0)
  835. [ 19.107816] 74b55a40: DMA ring(5) configured and Rx mapped to cpu(1)
  836. [ 19.114150] 74b56c40: DMA ring(6) configured and Rx mapped to cpu(2)
  837. [ 19.120510] 74b57e40: DMA ring(7) configured and Rx mapped to cpu(3)
  838. [ 19.126697] 7b704c00: Redirection enabled, map(80f0) error ring(4)
  839. [ 19.133365] qca_nss_ppe_ds: Unknown symbol ppe_vp_free (err -2)
  840. [ 19.139000] qca_nss_ppe_ds: Unknown symbol ppe_vp_alloc (err -2)
  841. [ 19.185562] qca_nss_ppe_gretap: Unknown symbol ppe_tun_decap_enable (err -2)
  842. [ 19.185606] qca_nss_ppe_gretap: Unknown symbol ppe_tun_mtu_set (err -2)
  843. [ 19.191684] qca_nss_ppe_gretap: Unknown symbol ppe_tun_free (err -2)
  844. [ 19.198030] qca_nss_ppe_gretap: Unknown symbol ppe_tun_decap_disable (err -2)
  845. [ 19.204620] qca_nss_ppe_gretap: Unknown symbol ppe_tun_deconfigure (err -2)
  846. [ 19.211651] qca_nss_ppe_gretap: Unknown symbol ppe_tun_alloc (err -2)
  847. [ 19.218435] qca_nss_ppe_gretap: Unknown symbol ppe_tun_exception_packet_get (err -2)
  848. [ 19.225012] qca_nss_ppe_gretap: Unknown symbol ppe_tun_conf_accel (err -2)
  849. [ 19.232842] qca_nss_ppe_gretap: Unknown symbol ppe_tun_configure (err -2)
  850. [ 19.285711] qca_nss_ppe_mapt: Unknown symbol ppe_tun_mtu_set (err -2)
  851. [ 19.285766] qca_nss_ppe_mapt: Unknown symbol ppe_tun_free (err -2)
  852. [ 19.291167] qca_nss_ppe_mapt: Unknown symbol ppe_tun_deconfigure (err -2)
  853. [ 19.297236] qca_nss_ppe_mapt: Unknown symbol ppe_tun_alloc (err -2)
  854. [ 19.304077] qca_nss_ppe_mapt: Unknown symbol ppe_tun_exception_packet_get (err -2)
  855. [ 19.310155] qca_nss_ppe_mapt: Unknown symbol ppe_tun_conf_accel (err -2)
  856. [ 19.317809] qca_nss_ppe_mapt: Unknown symbol ppe_tun_configure (err -2)
  857. [ 19.365626] qca_nss_ppe_tun: Unknown symbol ppe_vp_free (err -2)
  858. [ 19.365665] qca_nss_ppe_tun: Unknown symbol ppe_vp_alloc (err -2)
  859. [ 19.370731] qca_nss_ppe_tun: Unknown symbol ppe_vp_mtu_get (err -2)
  860. [ 19.376709] qca_nss_ppe_tun: Unknown symbol ppe_vp_mtu_set (err -2)
  861. [ 19.425537] qca_nss_ppe_tunipip6: Unknown symbol ppe_tun_mtu_set (err -2)
  862. [ 19.425580] qca_nss_ppe_tunipip6: Unknown symbol ppe_tun_free (err -2)
  863. [ 19.431310] qca_nss_ppe_tunipip6: Unknown symbol ppe_tun_deconfigure (err -2)
  864. [ 19.437746] qca_nss_ppe_tunipip6: Unknown symbol ppe_tun_alloc (err -2)
  865. [ 19.444939] qca_nss_ppe_tunipip6: Unknown symbol ppe_tun_exception_packet_get (err -2)
  866. [ 19.451365] qca_nss_ppe_tunipip6: Unknown symbol ppe_tun_conf_accel (err -2)
  867. [ 19.459364] qca_nss_ppe_tunipip6: Unknown symbol ppe_tun_configure (err -2)
  868. [ 19.545646] qca_nss_ppe_vxlanmgr: Unknown symbol ppe_tun_decap_enable (err -2)
  869. [ 19.545698] qca_nss_ppe_vxlanmgr: Unknown symbol ppe_tun_mtu_set (err -2)
  870. [ 19.551772] qca_nss_ppe_vxlanmgr: Unknown symbol ppe_tun_free (err -2)
  871. [ 19.558640] qca_nss_ppe_vxlanmgr: Unknown symbol ppe_tun_decap_disable (err -2)
  872. [ 19.565053] qca_nss_ppe_vxlanmgr: Unknown symbol ppe_tun_deconfigure (err -2)
  873. [ 19.572257] qca_nss_ppe_vxlanmgr: Unknown symbol ppe_tun_alloc (err -2)
  874. [ 19.579614] qca_nss_ppe_vxlanmgr: Unknown symbol ppe_tun_conf_accel (err -2)
  875. [ 19.585983] qca_nss_ppe_vxlanmgr: Unknown symbol ppe_tun_configure (err -2)
  876. [ 19.646080] qca_nss_ppe_gretap: Unknown symbol ppe_tun_decap_enable (err -2)
  877. [ 19.646124] qca_nss_ppe_gretap: Unknown symbol ppe_tun_mtu_set (err -2)
  878. [ 19.652204] qca_nss_ppe_gretap: Unknown symbol ppe_tun_free (err -2)
  879. [ 19.658553] qca_nss_ppe_gretap: Unknown symbol ppe_tun_decap_disable (err -2)
  880. [ 19.665139] qca_nss_ppe_gretap: Unknown symbol ppe_tun_deconfigure (err -2)
  881. [ 19.672170] qca_nss_ppe_gretap: Unknown symbol ppe_tun_alloc (err -2)
  882. [ 19.678964] qca_nss_ppe_gretap: Unknown symbol ppe_tun_exception_packet_get (err -2)
  883. [ 19.685538] qca_nss_ppe_gretap: Unknown symbol ppe_tun_conf_accel (err -2)
  884. [ 19.693353] qca_nss_ppe_gretap: Unknown symbol ppe_tun_configure (err -2)
  885. [ 19.745552] qca_nss_ppe_mapt: Unknown symbol ppe_tun_mtu_set (err -2)
  886. [ 19.745596] qca_nss_ppe_mapt: Unknown symbol ppe_tun_free (err -2)
  887. [ 19.751004] qca_nss_ppe_mapt: Unknown symbol ppe_tun_deconfigure (err -2)
  888. [ 19.757066] qca_nss_ppe_mapt: Unknown symbol ppe_tun_alloc (err -2)
  889. [ 19.763913] qca_nss_ppe_mapt: Unknown symbol ppe_tun_exception_packet_get (err -2)
  890. [ 19.769992] qca_nss_ppe_mapt: Unknown symbol ppe_tun_conf_accel (err -2)
  891. [ 19.777643] qca_nss_ppe_mapt: Unknown symbol ppe_tun_configure (err -2)
  892. [ 19.907493] kmodloader: done loading kernel modules from /etc/modules.d/*
  893. [ 20.207147] ECM init
  894. [ 20.207184] ECM database jhash random seed: 0x8a67f5a5
  895. [ 20.209130] ECM init complete
  896. [ 20.222124] ECM OVS Test INIT
  897. Default Service Class Count: 8
  898. [ 20.393885] nss-dp 3a001200.dp2 eth1: PHY Link up speed: 100
  899. [ 20.394184] br-lan: port 1(eth1) entered blocking state
  900. [ 20.398729] br-lan: port 1(eth1) entered disabled state
  901. [ 20.403920] ppe_port_vsi_get[476]:INFO:VSI is not configured on port 0x2
  902. [ 20.409056] device eth1 entered promiscuous mode
  903. [ 20.416674] br-lan: port 1(eth1) entered blocking state
  904. [ 20.420304] br-lan: port 1(eth1) entered forwarding state
  905. [ 20.427587] br-lan: port 2(eth2) entered blocking state
  906. [ 20.430816] br-lan: port 2(eth2) entered disabled state
  907. [ 20.436524] ppe_port_vsi_get[476]:INFO:VSI is not configured on port 0x3
  908. [ 20.441158] device eth2 entered promiscuous mode
  909. [ 20.449524] br-lan: port 3(eth3) entered blocking state
  910. [ 20.452600] br-lan: port 3(eth3) entered disabled state
  911. [ 20.457845] ppe_port_vsi_get[476]:INFO:VSI is not configured on port 0x4
  912. [ 20.462872] device eth3 entered promiscuous mode
  913. [ 20.471333] br-lan: port 4(eth4) entered blocking state
  914. [ 20.474300] br-lan: port 4(eth4) entered disabled state
  915. [ 20.479652] ppe_port_vsi_get[476]:INFO:VSI is not configured on port 0x5
  916. [ 20.484605] device eth4 entered promiscuous mode
  917. [ 20.493192] br-lan: port 5(eth5) entered blocking state
  918. [ 20.496025] br-lan: port 5(eth5) entered disabled state
  919. [ 20.501147] ppe_port_vsi_get[476]:INFO:VSI is not configured on port 0x6
  920. [ 20.506529] device eth5 entered promiscuous mode
  921. [ 20.541802] mc_attach: enabled snooping on br-lan.
  922. [ 20.569430] edma_cfg_rx_rps[1542]:EDMA RPS configured to use 3 cores
  923. Custom Service Class Count: 1
  924. [ 20.732899] mc_detach: disabled snooping on br-lan.
  925. Runtime Failsafe Feature not enabled
  926. [ 20.852295] sh (2769): drop_caches: 3
  927. **** Platform Name: ap-al02-c4 *****
  928. Copy ART caldata from /dev/mtdblock23 to /tmp/virtual_art.bin
  929. [ 21.435485] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  930. [ 26.454924] mc_attach: enabled snooping on br-lan.
  931.  
  932.  
  933.  
  934. BusyBox v1.33.2 (2023-03-17 11:14:25 UTC) built-in shell (ash)
  935.  
  936. MM NM MMMMMMM M M
  937. $MMMMM MMMMM MMMMMMMMMMM MMM MMM
  938. MMMMMMMM MM MMMMM. MMMMM:MMMMMM: MMMM MMMMM
  939. MMMM= MMMMMM MMM MMMM MMMMM MMMM MMMMMM MMMM MMMMM'
  940. MMMM= MMMMM MMMM MM MMMMM MMMM MMMM MMMMNMMMMM
  941. MMMM= MMMM MMMMM MMMMM MMMM MMMM MMMMMMMM
  942. MMMM= MMMM MMMMMM MMMMM MMMM MMMM MMMMMMMMM
  943. MMMM= MMMM MMMMM, NMMMMMMMM MMMM MMMM MMMMMMMMMMM
  944. MMMM= MMMM MMMMMM MMMMMMMM MMMM MMMM MMMM MMMMMM
  945. MMMM= MMMM MM MMMM MMMM MMMM MMMM MMMM MMMM
  946. MMMM$ ,MMMMM MMMMM MMMM MMM MMMM MMMMM MMMM MMMM
  947. MMMMMMM: MMMMMMM M MMMMMMMMMMMM MMMMMMM MMMMMMM
  948. MMMMMM MMMMN M MMMMMMMMM MMMM MMMM
  949. MMMM M MMMMMMM M M
  950. M
  951. ---------------------------------------------------------------
  952. For those about to rock... OpenWrt 19.07-SNAPSHOT, r0-2482420a
  953. ---------------------------------------------------------------
  954. === WARNING! =====================================
  955. There is no root password defined on this device!
  956. Use the "passwd" command to set up a new password
  957. in order to prevent unauthorized SSH logins.
  958. --------------------------------------------------
  959. root@OpenWrt:/# ping 192.168.100.10
  960. PING 192.168.100.10 (192.168.100.10): 56 data bytes
  961. ping: sendto: Network unreachable
  962. root@OpenWrt:/# ifconfig
  963. br-lan Link encap:Ethernet HWaddr 00:03:7F:8A:32:87
  964. inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
  965. inet6 addr: fe80::203:7fff:fe8a:3287/64 Scope:Link
  966. inet6 addr: fd6a:2aa1:9d0c::1/60 Scope:Global
  967. UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
  968. RX packets:65 errors:0 dropped:0 overruns:0 frame:0
  969. TX packets:24 errors:0 dropped:0 overruns:0 carrier:0
  970. collisions:0 txqueuelen:1000
  971. RX bytes:8987 (8.7 KiB) TX bytes:2993 (2.9 KiB)
  972.  
  973. eth0 Link encap:Ethernet HWaddr 00:03:7F:93:1F:07
  974. UP BROADCAST MULTICAST MTU:1500 Metric:1
  975. RX packets:0 errors:0 dropped:0 overruns:0 frame:0
  976. TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
  977. collisions:0 txqueuelen:1000
  978. RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
  979. Base address:0x1000
  980.  
  981. eth1 Link encap:Ethernet HWaddr 00:03:7F:8A:32:87
  982. UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
  983. RX packets:65 errors:0 dropped:0 overruns:0 frame:0
  984. TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
  985. collisions:0 txqueuelen:1000
  986. RX bytes:10157 (9.9 KiB) TX bytes:2633 (2.5 KiB)
  987. Base address:0x1200
  988.  
  989. eth2 Link encap:Ethernet HWaddr 00:03:7F:EA:11:A6
  990. UP BROADCAST MULTICAST MTU:1500 Metric:1
  991. RX packets:0 errors:0 dropped:0 overruns:0 frame:0
  992. TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
  993. collisions:0 txqueuelen:1000
  994. RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
  995. Base address:0x1400
  996.  
  997. eth3 Link encap:Ethernet HWaddr 00:03:7F:AC:37:EA
  998. UP BROADCAST MULTICAST MTU:1500 Metric:1
  999. RX packets:0 errors:0 dropped:0 overruns:0 frame:0
  1000. TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
  1001. collisions:0 txqueuelen:1000
  1002. RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
  1003. Base address:0x1600
  1004.  
  1005. eth4 Link encap:Ethernet HWaddr 00:03:7F:0B:53:75
  1006. UP BROADCAST MULTICAST MTU:1500 Metric:1
  1007. RX packets:0 errors:0 dropped:0 overruns:0 frame:0
  1008. TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
  1009. collisions:0 txqueuelen:1000
  1010. RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
  1011.  
  1012. eth5 Link encap:Ethernet HWaddr 00:03:7F:2A:5C:78
  1013. UP BROADCAST MULTICAST MTU:1500 Metric:1
  1014. RX packets:0 errors:0 dropped:0 overruns:0 frame:0
  1015. TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
  1016. collisions:0 txqueuelen:1000
  1017. RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
  1018. Base address:0x4000
  1019.  
  1020. lo Link encap:Local Loopback
  1021. inet addr:127.0.0.1 Mask:255.0.0.0
  1022. inet6 addr: ::1/128 Scope:Host
  1023. UP LOOPBACK RUNNING MTU:65536 Metric:1
  1024. RX packets:20 errors:0 dropped:0 overruns:0 frame:0
  1025. TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
  1026. collisions:0 txqueuelen:1000
  1027. RX bytes:1192 (1.1 KiB) TX bytes:1192 (1.1 KiB)
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!